mmc: at91_mci: Enable MMC_CAP_SDIO_IRQ only when it actually works.
authorNicolas Ferre <nicolas.ferre@atmel.com>
Fri, 5 Mar 2010 21:43:43 +0000 (13:43 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 6 Mar 2010 19:26:43 +0000 (11:26 -0800)
According to the datasheets AT91SAM9261 does not support SDIO interrupts,
and AT91SAM9260/9263 have an erratum requiring 4bit mode while using slot
B for the interrupt to work.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/mmc/host/at91_mci.c

index 3cd00c6f258417055dbcec9fd25811b6362b3020..8327daebb396aeeaf2f4a395d9797694c1d14ebe 100644 (file)
@@ -929,7 +929,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
        mmc->f_min = 375000;
        mmc->f_max = 25000000;
        mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-       mmc->caps = MMC_CAP_SDIO_IRQ;
+       mmc->caps = 0;
 
        mmc->max_blk_size  = MCI_MAXBLKSIZE;
        mmc->max_blk_count = MCI_BLKATONCE;
@@ -958,6 +958,13 @@ static int __init at91_mci_probe(struct platform_device *pdev)
                goto fail5;
        }
 
+       /* Add SDIO capability when available */
+       if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
+               /* AT91SAM9260/9263 erratum */
+               if (host->board->wire4 || !host->board->slot_b)
+                       mmc->caps |= MMC_CAP_SDIO_IRQ;
+       }
+
        /*
         * Reserve GPIOs ... board init code makes sure these pins are set
         * up as GPIOs with the right direction (input, except for vcc)