arm64: dts: qcom: ipq6018: Add PCIe bridge node

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-16-1eb790c53e43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 4e29adea570a063fdd18c31da210d00176ace875..17ab6c4759580c28f09e6bb695e614a669f70df6 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -907,6 +907,16 @@
                                      "axi_s_sticky";
 
                        status = "disabled";
+
+                       pcie@0 {
+                               device_type = "pci";
+                               reg = <0x0 0x0 0x0 0x0 0x0>;
+                               bus-range = <0x01 0xff>;
+
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               ranges;
+                       };
                };
        };