If the userspace hasn't been prepared to ignore the unreliable "opened"
events and the unreliable initial state notification, Linux users can use
the following kernel parameters to handle the possible issues:
-A. button.lid_init_state=open:
+A. button.lid_init_state=method:
+ When this option is specified, the ACPI button driver reports the
+ initial lid state using the returning value of the _LID control method
+ and whether the "opened"/"closed" events are paired fully relies on the
+ firmware implementation.
+ This option can be used to fix some platforms where the returning value
+ of the _LID control method is reliable but the initial lid state
+ notification is missing.
+ This option is the default behavior during the period the userspace
+ isn't ready to handle the buggy AML tables.
+B. button.lid_init_state=open:
When this option is specified, the ACPI button driver always reports the
initial lid state as "opened" and whether the "opened"/"closed" events
are paired fully relies on the firmware implementation.
This may fix some platforms where the returning value of the _LID
control method is not reliable and the initial lid state notification is
missing.
- This option is the default behavior during the period the userspace
- isn't ready to handle the buggy AML tables.
If the userspace has been prepared to ignore the unreliable "opened" events
and the unreliable initial state notification, Linux users should always
use the following kernel parameter:
-B. button.lid_init_state=ignore:
+C. button.lid_init_state=ignore:
When this option is specified, the ACPI button driver never reports the
initial lid state and there is a compensation mechanism implemented to
ensure that the reliable "closed" notifications can always be delievered
.. |struct cpufreq_policy| replace:: :c:type:`struct cpufreq_policy <cpufreq_policy>`
+.. |intel_pstate| replace:: :doc:`intel_pstate <intel_pstate>`
=======================
CPU Performance Scaling
interface it comes from and may not be easily represented in an abstract,
platform-independent way. For this reason, ``CPUFreq`` allows scaling drivers
to bypass the governor layer and implement their own performance scaling
-algorithms. That is done by the ``intel_pstate`` scaling driver.
+algorithms. That is done by the |intel_pstate| scaling driver.
``CPUFreq`` Policy Objects
into account. That is achieved by invoking the governor's ``->stop`` and
``->start()`` callbacks, in this order, for the entire policy.
-As mentioned before, the ``intel_pstate`` scaling driver bypasses the scaling
+As mentioned before, the |intel_pstate| scaling driver bypasses the scaling
governor layer of ``CPUFreq`` and provides its own P-state selection algorithms.
-Consequently, if ``intel_pstate`` is used, scaling governors are not attached to
+Consequently, if |intel_pstate| is used, scaling governors are not attached to
new policy objects. Instead, the driver's ``->setpolicy()`` callback is invoked
to register per-CPU utilization update callbacks for each policy. These
callbacks are invoked by the CPU scheduler in the same way as for scaling
-governors, but in the ``intel_pstate`` case they both determine the P-state to
+governors, but in the |intel_pstate| case they both determine the P-state to
use and change the hardware configuration accordingly in one go from scheduler
context.
``scaling_available_governors``
List of ``CPUFreq`` scaling governors present in the kernel that can
- be attached to this policy or (if the ``intel_pstate`` scaling driver is
+ be attached to this policy or (if the |intel_pstate| scaling driver is
in use) list of scaling algorithms provided by the driver that can be
applied to this policy.
the CPU is actually running at (due to hardware design and other
limitations).
- Some scaling drivers (e.g. ``intel_pstate``) attempt to provide
+ Some scaling drivers (e.g. |intel_pstate|) attempt to provide
information more precisely reflecting the current CPU frequency through
this attribute, but that still may not be the exact current CPU
frequency as seen by the hardware at the moment.
``scaling_governor``
The scaling governor currently attached to this policy or (if the
- ``intel_pstate`` scaling driver is in use) the scaling algorithm
+ |intel_pstate| scaling driver is in use) the scaling algorithm
provided by the driver that is currently applied to this policy.
This attribute is read-write and writing to it will cause a new scaling
governor to be attached to this policy or a new scaling algorithm
provided by the scaling driver to be applied to it (in the
- ``intel_pstate`` case), as indicated by the string written to this
+ |intel_pstate| case), as indicated by the string written to this
attribute (which must be one of the names listed by the
``scaling_available_governors`` attribute described above).
the "boost" setting for the whole system. It is not present if the underlying
scaling driver does not support the frequency boost mechanism (or supports it,
but provides a driver-specific interface for controlling it, like
-``intel_pstate``).
+|intel_pstate|).
If the value in this file is 1, the frequency boost mechanism is enabled. This
means that either the hardware can be put into states in which it is able to
:maxdepth: 2
cpufreq
+ intel_pstate
.. only:: subproject and html
--- /dev/null
+===============================================
+``intel_pstate`` CPU Performance Scaling Driver
+===============================================
+
+::
+
+ Copyright (c) 2017 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+
+General Information
+===================
+
+``intel_pstate`` is a part of the
+:doc:`CPU performance scaling subsystem <cpufreq>` in the Linux kernel
+(``CPUFreq``). It is a scaling driver for the Sandy Bridge and later
+generations of Intel processors. Note, however, that some of those processors
+may not be supported. [To understand ``intel_pstate`` it is necessary to know
+how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if
+you have not done that yet.]
+
+For the processors supported by ``intel_pstate``, the P-state concept is broader
+than just an operating frequency or an operating performance point (see the
+`LinuxCon Europe 2015 presentation by Kristen Accardi <LCEU2015_>`_ for more
+information about that). For this reason, the representation of P-states used
+by ``intel_pstate`` internally follows the hardware specification (for details
+refer to `Intel® 64 and IA-32 Architectures Software Developer’s Manual
+Volume 3: System Programming Guide <SDM_>`_). However, the ``CPUFreq`` core
+uses frequencies for identifying operating performance points of CPUs and
+frequencies are involved in the user space interface exposed by it, so
+``intel_pstate`` maps its internal representation of P-states to frequencies too
+(fortunately, that mapping is unambiguous). At the same time, it would not be
+practical for ``intel_pstate`` to supply the ``CPUFreq`` core with a table of
+available frequencies due to the possible size of it, so the driver does not do
+that. Some functionality of the core is limited by that.
+
+Since the hardware P-state selection interface used by ``intel_pstate`` is
+available at the logical CPU level, the driver always works with individual
+CPUs. Consequently, if ``intel_pstate`` is in use, every ``CPUFreq`` policy
+object corresponds to one logical CPU and ``CPUFreq`` policies are effectively
+equivalent to CPUs. In particular, this means that they become "inactive" every
+time the corresponding CPU is taken offline and need to be re-initialized when
+it goes back online.
+
+``intel_pstate`` is not modular, so it cannot be unloaded, which means that the
+only way to pass early-configuration-time parameters to it is via the kernel
+command line. However, its configuration can be adjusted via ``sysfs`` to a
+great extent. In some configurations it even is possible to unregister it via
+``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and
+registered (see `below <status_attr_>`_).
+
+
+Operation Modes
+===============
+
+``intel_pstate`` can operate in three different modes: in the active mode with
+or without hardware-managed P-states support and in the passive mode. Which of
+them will be in effect depends on what kernel command line options are used and
+on the capabilities of the processor.
+
+Active Mode
+-----------
+
+This is the default operation mode of ``intel_pstate``. If it works in this
+mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
+policies contains the string "intel_pstate".
+
+In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
+provides its own scaling algorithms for P-state selection. Those algorithms
+can be applied to ``CPUFreq`` policies in the same way as generic scaling
+governors (that is, through the ``scaling_governor`` policy attribute in
+``sysfs``). [Note that different P-state selection algorithms may be chosen for
+different policies, but that is not recommended.]
+
+They are not generic scaling governors, but their names are the same as the
+names of some of those governors. Moreover, confusingly enough, they generally
+do not work in the same way as the generic governors they share the names with.
+For example, the ``powersave`` P-state selection algorithm provided by
+``intel_pstate`` is not a counterpart of the generic ``powersave`` governor
+(roughly, it corresponds to the ``schedutil`` and ``ondemand`` governors).
+
+There are two P-state selection algorithms provided by ``intel_pstate`` in the
+active mode: ``powersave`` and ``performance``. The way they both operate
+depends on whether or not the hardware-managed P-states (HWP) feature has been
+enabled in the processor and possibly on the processor model.
+
+Which of the P-state selection algorithms is used by default depends on the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option.
+Namely, if that option is set, the ``performance`` algorithm will be used by
+default, and the other one will be used by default if it is not set.
+
+Active Mode With HWP
+~~~~~~~~~~~~~~~~~~~~
+
+If the processor supports the HWP feature, it will be enabled during the
+processor initialization and cannot be disabled after that. It is possible
+to avoid enabling it by passing the ``intel_pstate=no_hwp`` argument to the
+kernel in the command line.
+
+If the HWP feature has been enabled, ``intel_pstate`` relies on the processor to
+select P-states by itself, but still it can give hints to the processor's
+internal P-state selection logic. What those hints are depends on which P-state
+selection algorithm has been applied to the given policy (or to the CPU it
+corresponds to).
+
+Even though the P-state selection is carried out by the processor automatically,
+``intel_pstate`` registers utilization update callbacks with the CPU scheduler
+in this mode. However, they are not used for running a P-state selection
+algorithm, but for periodic updates of the current CPU frequency information to
+be made available from the ``scaling_cur_freq`` policy attribute in ``sysfs``.
+
+HWP + ``performance``
+.....................
+
+In this configuration ``intel_pstate`` will write 0 to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
+internal P-state selection logic is expected to focus entirely on performance.
+
+This will override the EPP/EPB setting coming from the ``sysfs`` interface
+(see `Energy vs Performance Hints`_ below).
+
+Also, in this configuration the range of P-states available to the processor's
+internal P-state selection logic is always restricted to the upper boundary
+(that is, the maximum P-state that the driver is allowed to use).
+
+HWP + ``powersave``
+...................
+
+In this configuration ``intel_pstate`` will set the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob (otherwise) to whatever value it was
+previously set to via ``sysfs`` (or whatever default value it was
+set to by the platform firmware). This usually causes the processor's
+internal P-state selection logic to be less performance-focused.
+
+Active Mode Without HWP
+~~~~~~~~~~~~~~~~~~~~~~~
+
+This is the default operation mode for processors that do not support the HWP
+feature. It also is used by default with the ``intel_pstate=no_hwp`` argument
+in the kernel command line. However, in this mode ``intel_pstate`` may refuse
+to work with the given processor if it does not recognize it. [Note that
+``intel_pstate`` will never refuse to work with any processor with the HWP
+feature enabled.]
+
+In this mode ``intel_pstate`` registers utilization update callbacks with the
+CPU scheduler in order to run a P-state selection algorithm, either
+``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+setting in ``sysfs``. The current CPU frequency information to be made
+available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
+periodically updated by those utilization update callbacks too.
+
+``performance``
+...............
+
+Without HWP, this P-state selection algorithm is always the same regardless of
+the processor model and platform configuration.
+
+It selects the maximum P-state it is allowed to use, subject to limits set via
+``sysfs``, every time the P-state selection computations are carried out by the
+driver's utilization update callback for the given CPU (that does not happen
+more often than every 10 ms), but the hardware configuration will not be changed
+if the new P-state is the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is set.
+
+``powersave``
+.............
+
+Without HWP, this P-state selection algorithm generally depends on the
+processor model and/or the system profile setting in the ACPI tables and there
+are two variants of it.
+
+One of them is used with processors from the Atom line and (regardless of the
+processor model) on platforms with the system profile in the ACPI tables set to
+"mobile" (laptops mostly), "tablet", "appliance PC", "desktop", or
+"workstation". It is also used with processors supporting the HWP feature if
+that feature has not been enabled (that is, with the ``intel_pstate=no_hwp``
+argument in the kernel command line). It is similar to the algorithm
+implemented by the generic ``schedutil`` scaling governor except that the
+utilization metric used by it is based on numbers coming from feedback
+registers of the CPU. It generally selects P-states proportional to the
+current CPU utilization, so it is referred to as the "proportional" algorithm.
+
+The second variant of the ``powersave`` P-state selection algorithm, used in all
+of the other cases (generally, on processors from the Core line, so it is
+referred to as the "Core" algorithm), is based on the values read from the APERF
+and MPERF feedback registers and the previously requested target P-state.
+It does not really take CPU utilization into account explicitly, but as a rule
+it causes the CPU P-state to ramp up very quickly in response to increased
+utilization which is generally desirable in server environments.
+
+Regardless of the variant, this algorithm is run by the driver's utilization
+update callback for the given CPU when it is invoked by the CPU scheduler, but
+not more often than every 10 ms (that can be tweaked via ``debugfs`` in `this
+particular case <Tuning Interface in debugfs_>`_). Like in the ``performance``
+case, the hardware configuration is not touched if the new P-state turns out to
+be the same as the current one.
+
+This is the default P-state selection algorithm if the
+:c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option
+is not set.
+
+Passive Mode
+------------
+
+This mode is used if the ``intel_pstate=passive`` argument is passed to the
+kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
+Like in the active mode without HWP support, in this mode ``intel_pstate`` may
+refuse to work with the given processor if it does not recognize it.
+
+If the driver works in this mode, the ``scaling_driver`` policy attribute in
+``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
+Then, the driver behaves like a regular ``CPUFreq`` scaling driver. That is,
+it is invoked by generic scaling governors when necessary to talk to the
+hardware in order to change the P-state of a CPU (in particular, the
+``schedutil`` governor can invoke it directly from scheduler context).
+
+While in this mode, ``intel_pstate`` can be used with all of the (generic)
+scaling governors listed by the ``scaling_available_governors`` policy attribute
+in ``sysfs`` (and the P-state selection algorithms described above are not
+used). Then, it is responsible for the configuration of policy objects
+corresponding to CPUs and provides the ``CPUFreq`` core (and the scaling
+governors attached to the policy objects) with accurate information on the
+maximum and minimum operating frequencies supported by the hardware (including
+the so-called "turbo" frequency ranges). In other words, in the passive mode
+the entire range of available P-states is exposed by ``intel_pstate`` to the
+``CPUFreq`` core. However, in this mode the driver does not register
+utilization update callbacks with the CPU scheduler and the ``scaling_cur_freq``
+information comes from the ``CPUFreq`` core (and is the last frequency selected
+by the current scaling governor for the given policy).
+
+
+.. _turbo:
+
+Turbo P-states Support
+======================
+
+In the majority of cases, the entire range of P-states available to
+``intel_pstate`` can be divided into two sub-ranges that correspond to
+different types of processor behavior, above and below a boundary that
+will be referred to as the "turbo threshold" in what follows.
+
+The P-states above the turbo threshold are referred to as "turbo P-states" and
+the whole sub-range of P-states they belong to is referred to as the "turbo
+range". These names are related to the Turbo Boost technology allowing a
+multicore processor to opportunistically increase the P-state of one or more
+cores if there is enough power to do that and if that is not going to cause the
+thermal envelope of the processor package to be exceeded.
+
+Specifically, if software sets the P-state of a CPU core within the turbo range
+(that is, above the turbo threshold), the processor is permitted to take over
+performance scaling control for that core and put it into turbo P-states of its
+choice going forward. However, that permission is interpreted differently by
+different processor generations. Namely, the Sandy Bridge generation of
+processors will never use any P-states above the last one set by software for
+the given core, even if it is within the turbo range, whereas all of the later
+processor generations will take it as a license to use any P-states from the
+turbo range, even above the one set by software. In other words, on those
+processors setting any P-state from the turbo range will enable the processor
+to put the given core into all turbo P-states up to and including the maximum
+supported one as it sees fit.
+
+One important property of turbo P-states is that they are not sustainable. More
+precisely, there is no guarantee that any CPUs will be able to stay in any of
+those states indefinitely, because the power distribution within the processor
+package may change over time or the thermal envelope it was designed for might
+be exceeded if a turbo P-state was used for too long.
+
+In turn, the P-states below the turbo threshold generally are sustainable. In
+fact, if one of them is set by software, the processor is not expected to change
+it to a lower one unless in a thermal stress or a power limit violation
+situation (a higher P-state may still be used if it is set for another CPU in
+the same package at the same time, for example).
+
+Some processors allow multiple cores to be in turbo P-states at the same time,
+but the maximum P-state that can be set for them generally depends on the number
+of cores running concurrently. The maximum turbo P-state that can be set for 3
+cores at the same time usually is lower than the analogous maximum P-state for
+2 cores, which in turn usually is lower than the maximum turbo P-state that can
+be set for 1 core. The one-core maximum turbo P-state is thus the maximum
+supported one overall.
+
+The maximum supported turbo P-state, the turbo threshold (the maximum supported
+non-turbo P-state) and the minimum supported P-state are specific to the
+processor model and can be determined by reading the processor's model-specific
+registers (MSRs). Moreover, some processors support the Configurable TDP
+(Thermal Design Power) feature and, when that feature is enabled, the turbo
+threshold effectively becomes a configurable value that can be set by the
+platform firmware.
+
+Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes
+the entire range of available P-states, including the whole turbo range, to the
+``CPUFreq`` core and (in the passive mode) to generic scaling governors. This
+generally causes turbo P-states to be set more often when ``intel_pstate`` is
+used relative to ACPI-based CPU performance scaling (see `below <acpi-cpufreq_>`_
+for more information).
+
+Moreover, since ``intel_pstate`` always knows what the real turbo threshold is
+(even if the Configurable TDP feature is enabled in the processor), its
+``no_turbo`` attribute in ``sysfs`` (described `below <no_turbo_attr_>`_) should
+work as expected in all cases (that is, if set to disable turbo P-states, it
+always should prevent ``intel_pstate`` from using them).
+
+
+Processor Support
+=================
+
+To handle a given processor ``intel_pstate`` requires a number of different
+pieces of information on it to be known, including:
+
+ * The minimum supported P-state.
+
+ * The maximum supported `non-turbo P-state <turbo_>`_.
+
+ * Whether or not turbo P-states are supported at all.
+
+ * The maximum supported `one-core turbo P-state <turbo_>`_ (if turbo P-states
+ are supported).
+
+ * The scaling formula to translate the driver's internal representation
+ of P-states into frequencies and the other way around.
+
+Generally, ways to obtain that information are specific to the processor model
+or family. Although it often is possible to obtain all of it from the processor
+itself (using model-specific registers), there are cases in which hardware
+manuals need to be consulted to get to it too.
+
+For this reason, there is a list of supported processors in ``intel_pstate`` and
+the driver initialization will fail if the detected processor is not in that
+list, unless it supports the `HWP feature <Active Mode_>`_. [The interface to
+obtain all of the information listed above is the same for all of the processors
+supporting the HWP feature, which is why they all are supported by
+``intel_pstate``.]
+
+
+User Space Interface in ``sysfs``
+=================================
+
+Global Attributes
+-----------------
+
+``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level. They are located in the
+``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
+CPUs.
+
+Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
+argument is passed to the kernel in the command line.
+
+``max_perf_pct``
+ Maximum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``min_perf_pct``
+ Minimum P-state the driver is allowed to set in percent of the
+ maximum supported performance level (the highest supported `turbo
+ P-state <turbo_>`_).
+
+ This attribute will not be exposed if the
+ ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel
+ command line.
+
+``num_pstates``
+ Number of P-states supported by the processor (between 0 and 255
+ inclusive) including both turbo and non-turbo P-states (see
+ `Turbo P-states Support`_).
+
+ The value of this attribute is not affected by the ``no_turbo``
+ setting described `below <no_turbo_attr_>`_.
+
+ This attribute is read-only.
+
+``turbo_pct``
+ Ratio of the `turbo range <turbo_>`_ size to the size of the entire
+ range of supported P-states, in percent.
+
+ This attribute is read-only.
+
+.. _no_turbo_attr:
+
+``no_turbo``
+ If set (equal to 1), the driver is not allowed to set any turbo P-states
+ (see `Turbo P-states Support`_). If unset (equalt to 0, which is the
+ default), turbo P-states can be set by the driver.
+ [Note that ``intel_pstate`` does not support the general ``boost``
+ attribute (supported by some other scaling drivers) which is replaced
+ by this one.]
+
+ This attrubute does not affect the maximum supported frequency value
+ supplied to the ``CPUFreq`` core and exposed via the policy interface,
+ but it affects the maximum possible value of per-policy P-state limits
+ (see `Interpretation of Policy Attributes`_ below for details).
+
+.. _status_attr:
+
+``status``
+ Operation mode of the driver: "active", "passive" or "off".
+
+ "active"
+ The driver is functional and in the `active mode
+ <Active Mode_>`_.
+
+ "passive"
+ The driver is functional and in the `passive mode
+ <Passive Mode_>`_.
+
+ "off"
+ The driver is not functional (it is not registered as a scaling
+ driver with the ``CPUFreq`` core).
+
+ This attribute can be written to in order to change the driver's
+ operation mode or to unregister it. The string written to it must be
+ one of the possible values of it and, if successful, the write will
+ cause the driver to switch over to the operation mode represented by
+ that string - or to be unregistered in the "off" case. [Actually,
+ switching over from the active mode to the passive mode or the other
+ way around causes the driver to be unregistered and registered again
+ with a different set of callbacks, so all of its settings (the global
+ as well as the per-policy ones) are then reset to their default
+ values, possibly depending on the target operation mode.]
+
+ That only is supported in some configurations, though (for example, if
+ the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
+ the operation mode of the driver cannot be changed), and if it is not
+ supported in the current configuration, writes to this attribute with
+ fail with an appropriate error.
+
+Interpretation of Policy Attributes
+-----------------------------------
+
+The interpretation of some ``CPUFreq`` policy attributes described in
+:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver
+and it generally depends on the driver's `operation mode <Operation Modes_>`_.
+
+First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and
+``scaling_cur_freq`` attributes are produced by applying a processor-specific
+multiplier to the internal P-state representation used by ``intel_pstate``.
+Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq``
+attributes are capped by the frequency corresponding to the maximum P-state that
+the driver is allowed to set.
+
+If the ``no_turbo`` `global attribute <no_turbo_attr_>`_ is set, the driver is
+not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq``
+and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency.
+Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and
+``scaling_min_freq`` to go down to that value if they were above it before.
+However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be
+restored after unsetting ``no_turbo``, unless these attributes have been written
+to after ``no_turbo`` was set.
+
+If ``no_turbo`` is not set, the maximum possible value of ``scaling_max_freq``
+and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state,
+which also is the value of ``cpuinfo_max_freq`` in either case.
+
+Next, the following policy attributes have special meaning if
+``intel_pstate`` works in the `active mode <Active Mode_>`_:
+
+``scaling_available_governors``
+ List of P-state selection algorithms provided by ``intel_pstate``.
+
+``scaling_governor``
+ P-state selection algorithm provided by ``intel_pstate`` currently in
+ use with the given policy.
+
+``scaling_cur_freq``
+ Frequency of the average P-state of the CPU represented by the given
+ policy for the time interval between the last two invocations of the
+ driver's utilization update callback by the CPU scheduler for that CPU.
+
+The meaning of these attributes in the `passive mode <Passive Mode_>`_ is the
+same as for other scaling drivers.
+
+Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate``
+depends on the operation mode of the driver. Namely, it is either
+"intel_pstate" (in the `active mode <Active Mode_>`_) or "intel_cpufreq" (in the
+`passive mode <Passive Mode_>`_).
+
+Coordination of P-State Limits
+------------------------------
+
+``intel_pstate`` allows P-state limits to be set in two ways: with the help of
+the ``max_perf_pct`` and ``min_perf_pct`` `global attributes
+<Global Attributes_>`_ or via the ``scaling_max_freq`` and ``scaling_min_freq``
+``CPUFreq`` policy attributes. The coordination between those limits is based
+on the following rules, regardless of the current operation mode of the driver:
+
+ 1. All CPUs are affected by the global limits (that is, none of them can be
+ requested to run faster than the global maximum and none of them can be
+ requested to run slower than the global minimum).
+
+ 2. Each individual CPU is affected by its own per-policy limits (that is, it
+ cannot be requested to run faster than its own per-policy maximum and it
+ cannot be requested to run slower than its own per-policy minimum).
+
+ 3. The global and per-policy limits can be set independently.
+
+If the `HWP feature is enabled in the processor <Active Mode With HWP_>`_, the
+resulting effective values are written into its registers whenever the limits
+change in order to request its internal P-state selection logic to always set
+P-states within these limits. Otherwise, the limits are taken into account by
+scaling governors (in the `passive mode <Passive Mode_>`_) and by the driver
+every time before setting a new P-state for a CPU.
+
+Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument
+is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed
+at all and the only way to set the limits is by using the policy attributes.
+
+
+Energy vs Performance Hints
+---------------------------
+
+If ``intel_pstate`` works in the `active mode with the HWP feature enabled
+<Active Mode With HWP_>`_ in the processor, additional attributes are present
+in every ``CPUFreq`` policy directory in ``sysfs``. They are intended to allow
+user space to help ``intel_pstate`` to adjust the processor's internal P-state
+selection logic by focusing it on performance or on energy-efficiency, or
+somewhere between the two extremes:
+
+``energy_performance_preference``
+ Current value of the energy vs performance hint for the given policy
+ (or the CPU represented by it).
+
+ The hint can be changed by writing to this attribute.
+
+``energy_performance_available_preferences``
+ List of strings that can be written to the
+ ``energy_performance_preference`` attribute.
+
+ They represent different energy vs performance hints and should be
+ self-explanatory, except that ``default`` represents whatever hint
+ value was set by the platform firmware.
+
+Strings written to the ``energy_performance_preference`` attribute are
+internally translated to integer values written to the processor's
+Energy-Performance Preference (EPP) knob (if supported) or its
+Energy-Performance Bias (EPB) knob.
+
+[Note that tasks may by migrated from one CPU to another by the scheduler's
+load-balancing algorithm and if different energy vs performance hints are
+set for those CPUs, that may lead to undesirable outcomes. To avoid such
+issues it is better to set the same energy vs performance hint for all CPUs
+or to pin every task potentially sensitive to them to a specific CPU.]
+
+.. _acpi-cpufreq:
+
+``intel_pstate`` vs ``acpi-cpufreq``
+====================================
+
+On the majority of systems supported by ``intel_pstate``, the ACPI tables
+provided by the platform firmware contain ``_PSS`` objects returning information
+that can be used for CPU performance scaling (refer to the `ACPI specification`_
+for details on the ``_PSS`` objects and the format of the information returned
+by them).
+
+The information returned by the ACPI ``_PSS`` objects is used by the
+``acpi-cpufreq`` scaling driver. On systems supported by ``intel_pstate``
+the ``acpi-cpufreq`` driver uses the same hardware CPU performance scaling
+interface, but the set of P-states it can use is limited by the ``_PSS``
+output.
+
+On those systems each ``_PSS`` object returns a list of P-states supported by
+the corresponding CPU which basically is a subset of the P-states range that can
+be used by ``intel_pstate`` on the same system, with one exception: the whole
+`turbo range <turbo_>`_ is represented by one item in it (the topmost one). By
+convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz
+than the frequency of the highest non-turbo P-state listed by it, but the
+corresponding P-state representation (following the hardware specification)
+returned for it matches the maximum supported turbo P-state (or is the
+special value 255 meaning essentially "go as high as you can get").
+
+The list of P-states returned by ``_PSS`` is reflected by the table of
+available frequencies supplied by ``acpi-cpufreq`` to the ``CPUFreq`` core and
+scaling governors and the minimum and maximum supported frequencies reported by
+it come from that list as well. In particular, given the special representation
+of the turbo range described above, this means that the maximum supported
+frequency reported by ``acpi-cpufreq`` is higher by 1 MHz than the frequency
+of the highest supported non-turbo P-state listed by ``_PSS`` which, of course,
+affects decisions made by the scaling governors, except for ``powersave`` and
+``performance``.
+
+For example, if a given governor attempts to select a frequency proportional to
+estimated CPU load and maps the load of 100% to the maximum supported frequency
+(possibly multiplied by a constant), then it will tend to choose P-states below
+the turbo threshold if ``acpi-cpufreq`` is used as the scaling driver, because
+in that case the turbo range corresponds to a small fraction of the frequency
+band it can use (1 MHz vs 1 GHz or more). In consequence, it will only go to
+the turbo range for the highest loads and the other loads above 50% that might
+benefit from running at turbo frequencies will be given non-turbo P-states
+instead.
+
+One more issue related to that may appear on systems supporting the
+`Configurable TDP feature <turbo_>`_ allowing the platform firmware to set the
+turbo threshold. Namely, if that is not coordinated with the lists of P-states
+returned by ``_PSS`` properly, there may be more than one item corresponding to
+a turbo P-state in those lists and there may be a problem with avoiding the
+turbo range (if desirable or necessary). Usually, to avoid using turbo
+P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed
+by ``_PSS``, but that is not sufficient when there are other turbo P-states in
+the list returned by it.
+
+Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the
+`passive mode <Passive Mode_>`_, except that the number of P-states it can set
+is limited to the ones listed by the ACPI ``_PSS`` objects.
+
+
+Kernel Command Line Options for ``intel_pstate``
+================================================
+
+Several kernel command line options can be used to pass early-configuration-time
+parameters to ``intel_pstate`` in order to enforce specific behavior of it. All
+of them have to be prepended with the ``intel_pstate=`` prefix.
+
+``disable``
+ Do not register ``intel_pstate`` as the scaling driver even if the
+ processor is supported by it.
+
+``passive``
+ Register ``intel_pstate`` in the `passive mode <Passive Mode_>`_ to
+ start with.
+
+ This option implies the ``no_hwp`` one described below.
+
+``force``
+ Register ``intel_pstate`` as the scaling driver instead of
+ ``acpi-cpufreq`` even if the latter is preferred on the given system.
+
+ This may prevent some platform features (such as thermal controls and
+ power capping) that rely on the availability of ACPI P-states
+ information from functioning as expected, so it should be used with
+ caution.
+
+ This option does not work with processors that are not supported by
+ ``intel_pstate`` and on platforms where the ``pcc-cpufreq`` scaling
+ driver is used instead of ``acpi-cpufreq``.
+
+``no_hwp``
+ Do not enable the `hardware-managed P-states (HWP) feature
+ <Active Mode With HWP_>`_ even if it is supported by the processor.
+
+``hwp_only``
+ Register ``intel_pstate`` as the scaling driver only if the
+ `hardware-managed P-states (HWP) feature <Active Mode With HWP_>`_ is
+ supported by the processor.
+
+``support_acpi_ppc``
+ Take ACPI ``_PPC`` performance limits into account.
+
+ If the preferred power management profile in the FADT (Fixed ACPI
+ Description Table) is set to "Enterprise Server" or "Performance
+ Server", the ACPI ``_PPC`` limits are taken into account by default
+ and this option has no effect.
+
+``per_cpu_perf_limits``
+ Use per-logical-CPU P-State limits (see `Coordination of P-state
+ Limits`_ for details).
+
+
+Diagnostics and Tuning
+======================
+
+Trace Events
+------------
+
+There are two static trace events that can be used for ``intel_pstate``
+diagnostics. One of them is the ``cpu_frequency`` trace event generally used
+by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific
+to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if
+it works in the `active mode <Active Mode_>`_.
+
+The following sequence of shell commands can be used to enable them and see
+their output (if the kernel is generally configured to support event tracing)::
+
+ # cd /sys/kernel/debug/tracing/
+ # echo 1 > events/power/pstate_sample/enable
+ # echo 1 > events/power/cpu_frequency/enable
+ # cat trace
+ gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476
+ cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
+
+If ``intel_pstate`` works in the `passive mode <Passive Mode_>`_, the
+``cpu_frequency`` trace event will be triggered either by the ``schedutil``
+scaling governor (for the policies it is attached to), or by the ``CPUFreq``
+core (for the policies with other scaling governors).
+
+``ftrace``
+----------
+
+The ``ftrace`` interface can be used for low-level diagnostics of
+``intel_pstate``. For example, to check how often the function to set a
+P-state is called, the ``ftrace`` filter can be set to to
+:c:func:`intel_pstate_set_pstate`::
+
+ # cd /sys/kernel/debug/tracing/
+ # cat available_filter_functions | grep -i pstate
+ intel_pstate_set_pstate
+ intel_pstate_cpu_init
+ ...
+ # echo intel_pstate_set_pstate > set_ftrace_filter
+ # echo function > current_tracer
+ # cat trace | head -15
+ # tracer: function
+ #
+ # entries-in-buffer/entries-written: 80/80 #P:4
+ #
+ # _-----=> irqs-off
+ # / _----=> need-resched
+ # | / _---=> hardirq/softirq
+ # || / _--=> preempt-depth
+ # ||| / delay
+ # TASK-PID CPU# |||| TIMESTAMP FUNCTION
+ # | | | |||| | |
+ Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
+ gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
+ <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
+
+Tuning Interface in ``debugfs``
+-------------------------------
+
+The ``powersave`` algorithm provided by ``intel_pstate`` for `the Core line of
+processors in the active mode <powersave_>`_ is based on a `PID controller`_
+whose parameters were chosen to address a number of different use cases at the
+same time. However, it still is possible to fine-tune it to a specific workload
+and the ``debugfs`` interface under ``/sys/kernel/debug/pstate_snb/`` is
+provided for this purpose. [Note that the ``pstate_snb`` directory will be
+present only if the specific P-state selection algorithm matching the interface
+in it actually is in use.]
+
+The following files present in that directory can be used to modify the PID
+controller parameters at run time:
+
+| ``deadband``
+| ``d_gain_pct``
+| ``i_gain_pct``
+| ``p_gain_pct``
+| ``sample_rate_ms``
+| ``setpoint``
+
+Note, however, that achieving desirable results this way generally requires
+expert-level understanding of the power vs performance tradeoff, so extra care
+is recommended when attempting to do that.
+
+
+.. _LCEU2015: http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
+.. _SDM: http://www.intel.com/content/www/us/en/architecture-and-technology/64-ia-32-architectures-software-developer-system-programming-manual-325384.html
+.. _ACPI specification: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf
+.. _PID controller: https://en.wikipedia.org/wiki/PID_controller
+++ /dev/null
-Intel P-State driver
---------------------
-
-This driver provides an interface to control the P-State selection for the
-SandyBridge+ Intel processors.
-
-The following document explains P-States:
-http://events.linuxfoundation.org/sites/events/files/slides/LinuxConEurope_2015.pdf
-As stated in the document, P-State doesn’t exactly mean a frequency. However, for
-the sake of the relationship with cpufreq, P-State and frequency are used
-interchangeably.
-
-Understanding the cpufreq core governors and policies are important before
-discussing more details about the Intel P-State driver. Based on what callbacks
-a cpufreq driver provides to the cpufreq core, it can support two types of
-drivers:
-- with target_index() callback: In this mode, the drivers using cpufreq core
-simply provide the minimum and maximum frequency limits and an additional
-interface target_index() to set the current frequency. The cpufreq subsystem
-has a number of scaling governors ("performance", "powersave", "ondemand",
-etc.). Depending on which governor is in use, cpufreq core will call for
-transitions to a specific frequency using target_index() callback.
-- setpolicy() callback: In this mode, drivers do not provide target_index()
-callback, so cpufreq core can't request a transition to a specific frequency.
-The driver provides minimum and maximum frequency limits and callbacks to set a
-policy. The policy in cpufreq sysfs is referred to as the "scaling governor".
-The cpufreq core can request the driver to operate in any of the two policies:
-"performance" and "powersave". The driver decides which frequency to use based
-on the above policy selection considering minimum and maximum frequency limits.
-
-The Intel P-State driver falls under the latter category, which implements the
-setpolicy() callback. This driver decides what P-State to use based on the
-requested policy from the cpufreq core. If the processor is capable of
-selecting its next P-State internally, then the driver will offload this
-responsibility to the processor (aka HWP: Hardware P-States). If not, the
-driver implements algorithms to select the next P-State.
-
-Since these policies are implemented in the driver, they are not same as the
-cpufreq scaling governors implementation, even if they have the same name in
-the cpufreq sysfs (scaling_governors). For example the "performance" policy is
-similar to cpufreq’s "performance" governor, but "powersave" is completely
-different than the cpufreq "powersave" governor. The strategy here is similar
-to cpufreq "ondemand", where the requested P-State is related to the system load.
-
-Sysfs Interface
-
-In addition to the frequency-controlling interfaces provided by the cpufreq
-core, the driver provides its own sysfs files to control the P-State selection.
-These files have been added to /sys/devices/system/cpu/intel_pstate/.
-Any changes made to these files are applicable to all CPUs (even in a
-multi-package system, Refer to later section on placing "Per-CPU limits").
-
- max_perf_pct: Limits the maximum P-State that will be requested by
- the driver. It states it as a percentage of the available performance. The
- available (P-State) performance may be reduced by the no_turbo
- setting described below.
-
- min_perf_pct: Limits the minimum P-State that will be requested by
- the driver. It states it as a percentage of the max (non-turbo)
- performance level.
-
- no_turbo: Limits the driver to selecting P-State below the turbo
- frequency range.
-
- turbo_pct: Displays the percentage of the total performance that
- is supported by hardware that is in the turbo range. This number
- is independent of whether turbo has been disabled or not.
-
- num_pstates: Displays the number of P-States that are supported
- by hardware. This number is independent of whether turbo has
- been disabled or not.
-
-For example, if a system has these parameters:
- Max 1 core turbo ratio: 0x21 (Max 1 core ratio is the maximum P-State)
- Max non turbo ratio: 0x17
- Minimum ratio : 0x08 (Here the ratio is called max efficiency ratio)
-
-Sysfs will show :
- max_perf_pct:100, which corresponds to 1 core ratio
- min_perf_pct:24, max_efficiency_ratio / max 1 Core ratio
- no_turbo:0, turbo is not disabled
- num_pstates:26 = (max 1 Core ratio - Max Efficiency Ratio + 1)
- turbo_pct:39 = (max 1 core ratio - max non turbo ratio) / num_pstates
-
-Refer to "Intel® 64 and IA-32 Architectures Software Developer’s Manual
-Volume 3: System Programming Guide" to understand ratios.
-
-There is one more sysfs attribute in /sys/devices/system/cpu/intel_pstate/
-that can be used for controlling the operation mode of the driver:
-
- status: Three settings are possible:
- "off" - The driver is not in use at this time.
- "active" - The driver works as a P-state governor (default).
- "passive" - The driver works as a regular cpufreq one and collaborates
- with the generic cpufreq governors (it sets P-states as
- requested by those governors).
- The current setting is returned by reads from this attribute. Writing one
- of the above strings to it changes the operation mode as indicated by that
- string, if possible. If HW-managed P-states (HWP) are enabled, it is not
- possible to change the driver's operation mode and attempts to write to
- this attribute will fail.
-
-cpufreq sysfs for Intel P-State
-
-Since this driver registers with cpufreq, cpufreq sysfs is also presented.
-There are some important differences, which need to be considered.
-
-scaling_cur_freq: This displays the real frequency which was used during
-the last sample period instead of what is requested. Some other cpufreq driver,
-like acpi-cpufreq, displays what is requested (Some changes are on the
-way to fix this for acpi-cpufreq driver). The same is true for frequencies
-displayed at /proc/cpuinfo.
-
-scaling_governor: This displays current active policy. Since each CPU has a
-cpufreq sysfs, it is possible to set a scaling governor to each CPU. But this
-is not possible with Intel P-States, as there is one common policy for all
-CPUs. Here, the last requested policy will be applicable to all CPUs. It is
-suggested that one use the cpupower utility to change policy to all CPUs at the
-same time.
-
-scaling_setspeed: This attribute can never be used with Intel P-State.
-
-scaling_max_freq/scaling_min_freq: This interface can be used similarly to
-the max_perf_pct/min_perf_pct of Intel P-State sysfs. However since frequencies
-are converted to nearest possible P-State, this is prone to rounding errors.
-This method is not preferred to limit performance.
-
-affected_cpus: Not used
-related_cpus: Not used
-
-For contemporary Intel processors, the frequency is controlled by the
-processor itself and the P-State exposed to software is related to
-performance levels. The idea that frequency can be set to a single
-frequency is fictional for Intel Core processors. Even if the scaling
-driver selects a single P-State, the actual frequency the processor
-will run at is selected by the processor itself.
-
-Per-CPU limits
-
-The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
-the intel_pstate driver to use per-CPU performance limits. When it is set,
-the sysfs control interface described above is subject to limitations.
-- The following controls are not available for both read and write
- /sys/devices/system/cpu/intel_pstate/max_perf_pct
- /sys/devices/system/cpu/intel_pstate/min_perf_pct
-- The following controls can be used to set performance limits, as far as the
-architecture of the processor permits:
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
- /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
-- User can still observe turbo percent and number of P-States from
- /sys/devices/system/cpu/intel_pstate/turbo_pct
- /sys/devices/system/cpu/intel_pstate/num_pstates
-- User can read write system wide turbo status
- /sys/devices/system/cpu/no_turbo
-
-Support of energy performance hints
-It is possible to provide hints to the HWP algorithms in the processor
-to be more performance centric to more energy centric. When the driver
-is using HWP, two additional cpufreq sysfs attributes are presented for
-each logical CPU.
-These attributes are:
- - energy_performance_available_preferences
- - energy_performance_preference
-
-To get list of supported hints:
-$ cat energy_performance_available_preferences
- default performance balance_performance balance_power power
-
-The current preference can be read or changed via cpufreq sysfs
-attribute "energy_performance_preference". Reading from this attribute
-will display current effective setting. User can write any of the valid
-preference string to this attribute. User can always restore to power-on
-default by writing "default".
-
-Since threads can migrate to different CPUs, this is possible that the
-new CPU may have different energy performance preference than the previous
-one. To avoid such issues, either threads can be pinned to specific CPUs
-or set the same energy performance preference value to all CPUs.
-
-Tuning Intel P-State driver
-
-When the performance can be tuned using PID (Proportional Integral
-Derivative) controller, debugfs files are provided for adjusting performance.
-They are presented under:
-/sys/kernel/debug/pstate_snb/
-
-The PID tunable parameters are:
- deadband
- d_gain_pct
- i_gain_pct
- p_gain_pct
- sample_rate_ms
- setpoint
-
-To adjust these parameters, some understanding of driver implementation is
-necessary. There are some tweeks described here, but be very careful. Adjusting
-them requires expert level understanding of power and performance relationship.
-These limits are only useful when the "powersave" policy is active.
-
--To make the system more responsive to load changes, sample_rate_ms can
-be adjusted (current default is 10ms).
--To make the system use higher performance, even if the load is lower, setpoint
-can be adjusted to a lower number. This will also lead to faster ramp up time
-to reach the maximum P-State.
-If there are no derivative and integral coefficients, The next P-State will be
-equal to:
- current P-State - ((setpoint - current cpu load) * p_gain_pct)
-
-For example, if the current PID parameters are (Which are defaults for the core
-processors like SandyBridge):
- deadband = 0
- d_gain_pct = 0
- i_gain_pct = 0
- p_gain_pct = 20
- sample_rate_ms = 10
- setpoint = 97
-
-If the current P-State = 0x08 and current load = 100, this will result in the
-next P-State = 0x08 - ((97 - 100) * 0.2) = 8.6 (rounded to 9). Here the P-State
-goes up by only 1. If during next sample interval the current load doesn't
-change and still 100, then P-State goes up by one again. This process will
-continue as long as the load is more than the setpoint until the maximum P-State
-is reached.
-
-For the same load at setpoint = 60, this will result in the next P-State
-= 0x08 - ((60 - 100) * 0.2) = 16
-So by changing the setpoint from 97 to 60, there is an increase of the
-next P-State from 9 to 16. So this will make processor execute at higher
-P-State for the same CPU load. If the load continues to be more than the
-setpoint during next sample intervals, then P-State will go up again till the
-maximum P-State is reached. But the ramp up time to reach the maximum P-State
-will be much faster when the setpoint is 60 compared to 97.
-
-Debugging Intel P-State driver
-
-Event tracing
-To debug P-State transition, the Linux event tracing interface can be used.
-There are two specific events, which can be enabled (Provided the kernel
-configs related to event tracing are enabled).
-
-# cd /sys/kernel/debug/tracing/
-# echo 1 > events/power/pstate_sample/enable
-# echo 1 > events/power/cpu_frequency/enable
-# cat trace
-gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107
- scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618
- freq=2474476
-cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2
-
-
-Using ftrace
-
-If function level tracing is required, the Linux ftrace interface can be used.
-For example if we want to check how often a function to set a P-State is
-called, we can set ftrace filter to intel_pstate_set_pstate.
-
-# cd /sys/kernel/debug/tracing/
-# cat available_filter_functions | grep -i pstate
-intel_pstate_set_pstate
-intel_pstate_cpu_init
-...
-
-# echo intel_pstate_set_pstate > set_ftrace_filter
-# echo function > current_tracer
-# cat trace | head -15
-# tracer: function
-#
-# entries-in-buffer/entries-written: 80/80 #P:4
-#
-# _-----=> irqs-off
-# / _----=> need-resched
-# | / _---=> hardirq/softirq
-# || / _--=> preempt-depth
-# ||| / delay
-# TASK-PID CPU# |||| TIMESTAMP FUNCTION
-# | | | |||| | |
- Xorg-3129 [000] ..s. 2537.644844: intel_pstate_set_pstate <-intel_pstate_timer_func
- gnome-terminal--4510 [002] ..s. 2537.649844: intel_pstate_set_pstate <-intel_pstate_timer_func
- gnome-shell-3409 [001] ..s. 2537.650850: intel_pstate_set_pstate <-intel_pstate_timer_func
- <idle>-0 [000] ..s. 2537.654843: intel_pstate_set_pstate <-intel_pstate_timer_func
+++ /dev/null
-Hi6220 SoC ION
-===================================================================
-Required properties:
-- compatible : "hisilicon,hi6220-ion"
-- list of the ION heaps
- - heap name : maybe heap_sys_user@0
- - heap id : id should be unique in the system.
- - heap base : base ddr address of the heap,0 means that
- it is dynamic.
- - heap size : memory size and 0 means it is dynamic.
- - heap type : the heap type of the heap, please also
- see the define in ion.h(drivers/staging/android/uapi/ion.h)
--------------------------------------------------------------------
-Example:
- hi6220-ion {
- compatible = "hisilicon,hi6220-ion";
- heap_sys_user@0 {
- heap-name = "sys_user";
- heap-id = <0x0>;
- heap-base = <0x0>;
- heap-size = <0x0>;
- heap-type = "ion_system";
- };
- heap_sys_contig@0 {
- heap-name = "sys_contig";
- heap-id = <0x1>;
- heap-base = <0x0>;
- heap-size = <0x0>;
- heap-type = "ion_system_contig";
- };
- };
registering/unregistering cables and their plugs:
.. kernel-doc:: drivers/usb/typec/typec.c
- :functions: typec_register_cable typec_unregister_cable typec_register_plug
- typec_unregister_plug
+ :functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug
The class will provide a handle to struct typec_cable and struct typec_plug if
the registration is successful, or NULL if it isn't.
APIs to report it to the class:
.. kernel-doc:: drivers/usb/typec/typec.c
- :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role
- typec_set_pwr_opmode
+ :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode
Alternate Modes
~~~~~~~~~~~~~~~
-------------------------------------------------
iTCO_wdt:
heartbeat: Watchdog heartbeat in seconds.
- (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+ (5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
nowayout: Watchdog cannot be stopped once started
(default=kernel config parameter)
-------------------------------------------------
M: Sumit Semwal <sumit.semwal@linaro.org>
L: devel@driverdev.osuosl.org
S: Supported
-F: Documentation/devicetree/bindings/staging/ion/
F: drivers/staging/android/ion
F: drivers/staging/android/uapi/ion.h
F: drivers/staging/android/uapi/ion_test.h
F: include/linux/spi/cc2520.h
F: Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
+CCREE ARM TRUSTZONE CRYPTOCELL 700 REE DRIVER
+M: Gilad Ben-Yossef <gilad@benyossef.com>
+L: linux-crypto@vger.kernel.org
+L: driverdev-devel@linuxdriverproject.org
+S: Supported
+F: drivers/staging/ccree/
+W: https://developer.arm.com/products/system-ip/trustzone-cryptocell/cryptocell-700-family
+
CEC FRAMEWORK
M: Hans Verkuil <hans.verkuil@cisco.com>
L: linux-media@vger.kernel.org
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Maintained
F: drivers/staging/greybus/
-L: greybus-dev@lists.linaro.org
+L: greybus-dev@lists.linaro.org (moderated for non-subscribers)
GREYBUS AUDIO PROTOCOLS DRIVERS
M: Vaibhav Agarwal <vaibhav.sr@gmail.com>
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <ooo@electrozaur.com>
-M: Benny Halevy <bhalevy@primarydata.com>
-L: osd-dev@open-osd.org
-W: http://open-osd.org
-T: git git://git.open-osd.org/open-osd.git
S: Maintained
F: drivers/scsi/osd/
F: include/scsi/osd_*
VERSION = 4
PATCHLEVEL = 12
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME = Fearless Coyote
# *DOCUMENTATION*
PHONY += headers_check
headers_check: headers_install
$(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/ $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Kernel selftest
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
- err = 0;
- err |= put_user(status, ustatus);
+ err = put_user(status, ustatus);
+ if (ret < 0)
+ return err ? err : ret;
+
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
/ {
aliases {
- ethernet = ðernet;
+ ethernet0 = ðernet;
};
};
/ {
aliases {
- ethernet = ðernet;
+ ethernet0 = ðernet;
};
};
brcm,pins = <0 1>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- i2c0_gpio32: i2c0_gpio32 {
- brcm,pins = <32 34>;
+ i2c0_gpio28: i2c0_gpio28 {
+ brcm,pins = <28 29>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
i2c0_gpio44: i2c0_gpio44 {
/* Separate from the uart0_gpio14 group
* because it conflicts with spi1_gpio16, and
* people often run uart0 on the two pins
- * without flow contrl.
+ * without flow control.
*/
uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
brcm,pins = <16 17>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- uart0_gpio30: uart0_gpio30 {
+ uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+ uart0_gpio32: uart0_gpio32 {
brcm,pins = <32 33>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
+ uart0_gpio36: uart0_gpio36 {
+ brcm,pins = <36 37>;
+ brcm,function = <BCM2835_FSEL_ALT2>;
+ };
+ uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+ brcm,pins = <38 39>;
+ brcm,function = <BCM2835_FSEL_ALT2>;
+ };
uart1_gpio14: uart1_gpio14 {
brcm,pins = <14 15>;
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_gpio36: uart1_gpio36 {
- brcm,pins = <36 37 38 39>;
- brcm,function = <BCM2835_FSEL_ALT2>;
- };
uart1_gpio40: uart1_gpio40 {
brcm,pins = <40 41>;
brcm,function = <BCM2835_FSEL_ALT5>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
+ ti,palmas-override-powerhold;
+ ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
coefficients = <0 2000>;
};
+&cpu_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
/include/ "dra7xx-clocks.dtsi"
imx53-qsrb {
pinctrl_pmic: pmicgrp {
fsl,pins = <
- MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */
>;
};
};
model = "Freescale i.MX6 SoloX SDB RevB Board";
};
-&cpu0 {
- operating-points = <
- /* kHz uV */
- 996000 1250000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
- fsl,soc-operating-points = <
- /* ARM kHz SOC uV */
- 996000 1250000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
-};
-
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
+++ /dev/null
-..
\ No newline at end of file
+++ /dev/null
-../../../../arm64/boot/dts
\ No newline at end of file
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
- OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
- OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
- OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <13000000>;
+ arm,cpu-registers-not-fw-configured;
};
watchdog: watchdog@10007000 {
simple-audio-card,bitclock-master = <&telephony_link_master>;
simple-audio-card,frame-master = <&telephony_link_master>;
simple-audio-card,format = "i2s";
-
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-inversion;
simple-audio-card,cpu {
sound-dai = <&mcbsp4>;
};
/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
/* PandaboardES has external pullups on SCL & SDA */
&dss_hdmi_pins {
pinctrl-single,pins = <
- OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
+ OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */
OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */
>;
--- /dev/null
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_USER_NS=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_GEMINI=y
+CONFIG_PCI=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="console=ttyS0,115200n8"
+CONFIG_KEXEC=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_GEMINI_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_FOTG210_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GEMINI=y
+CONFIG_DMADEVICES=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp_0_13_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run);
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run);
int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run);
#include <asm/vfp.h>
#include "../vfp/vfpinstr.h"
+#define CREATE_TRACE_POINTS
#include "trace.h"
#include "coproc.h"
return 1;
}
-int kvm_handle_cp14_access(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
- kvm_inject_undefined(vcpu);
- return 1;
-}
-
static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
{
/*
* must always support PMCCNTR (the cycle counter): we just RAZ/WI for
* all PM registers, which doesn't crash the guest kernel at least.
*/
-static bool pm_fake(struct kvm_vcpu *vcpu,
+static bool trap_raz_wi(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
return read_zero(vcpu, p);
}
-#define access_pmcr pm_fake
-#define access_pmcntenset pm_fake
-#define access_pmcntenclr pm_fake
-#define access_pmovsr pm_fake
-#define access_pmselr pm_fake
-#define access_pmceid0 pm_fake
-#define access_pmceid1 pm_fake
-#define access_pmccntr pm_fake
-#define access_pmxevtyper pm_fake
-#define access_pmxevcntr pm_fake
-#define access_pmuserenr pm_fake
-#define access_pmintenset pm_fake
-#define access_pmintenclr pm_fake
+#define access_pmcr trap_raz_wi
+#define access_pmcntenset trap_raz_wi
+#define access_pmcntenclr trap_raz_wi
+#define access_pmovsr trap_raz_wi
+#define access_pmselr trap_raz_wi
+#define access_pmceid0 trap_raz_wi
+#define access_pmceid1 trap_raz_wi
+#define access_pmccntr trap_raz_wi
+#define access_pmxevtyper trap_raz_wi
+#define access_pmxevcntr trap_raz_wi
+#define access_pmuserenr trap_raz_wi
+#define access_pmintenset trap_raz_wi
+#define access_pmintenclr trap_raz_wi
/* Architected CP15 registers.
* CRn denotes the primary register number, but is copied to the CRm in the
return 1;
}
-/**
- * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run: The kvm_run struct
- */
-int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+static struct coproc_params decode_64bit_hsr(struct kvm_vcpu *vcpu)
{
struct coproc_params params;
params.Rt2 = (kvm_vcpu_get_hsr(vcpu) >> 10) & 0xf;
params.CRm = 0;
+ return params;
+}
+
+/**
+ * kvm_handle_cp15_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params = decode_64bit_hsr(vcpu);
+
return emulate_cp15(vcpu, ¶ms);
}
+/**
+ * kvm_handle_cp14_64 -- handles a mrrc/mcrr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params = decode_64bit_hsr(vcpu);
+
+ /* raz_wi cp14 */
+ trap_raz_wi(vcpu, ¶ms, NULL);
+
+ /* handled */
+ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+ return 1;
+}
+
static void reset_coproc_regs(struct kvm_vcpu *vcpu,
const struct coproc_reg *table, size_t num)
{
table[i].reset(vcpu, &table[i]);
}
-/**
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
- * @vcpu: The VCPU pointer
- * @run: The kvm_run struct
- */
-int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu)
{
struct coproc_params params;
params.Op2 = (kvm_vcpu_get_hsr(vcpu) >> 17) & 0x7;
params.Rt2 = 0;
+ return params;
+}
+
+/**
+ * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params = decode_32bit_hsr(vcpu);
return emulate_cp15(vcpu, ¶ms);
}
+/**
+ * kvm_handle_cp14_32 -- handles a mrc/mcr trap on a guest CP14 access
+ * @vcpu: The VCPU pointer
+ * @run: The kvm_run struct
+ */
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ struct coproc_params params = decode_32bit_hsr(vcpu);
+
+ /* raz_wi cp14 */
+ trap_raz_wi(vcpu, ¶ms, NULL);
+
+ /* handled */
+ kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+ return 1;
+}
+
/******************************************************************************
* Userspace API
*****************************************************************************/
[HSR_EC_WFI] = kvm_handle_wfx,
[HSR_EC_CP15_32] = kvm_handle_cp15_32,
[HSR_EC_CP15_64] = kvm_handle_cp15_64,
- [HSR_EC_CP14_MR] = kvm_handle_cp14_access,
+ [HSR_EC_CP14_MR] = kvm_handle_cp14_32,
[HSR_EC_CP14_LS] = kvm_handle_cp14_load_store,
- [HSR_EC_CP14_64] = kvm_handle_cp14_access,
+ [HSR_EC_CP14_64] = kvm_handle_cp14_64,
[HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access,
[HSR_EC_CP10_ID] = kvm_handle_cp10_id,
[HSR_EC_HVC] = handle_hvc,
# Makefile for Kernel-based Virtual Machine module, HYP part
#
+ccflags-y += -fno-stack-protector
+
KVM=../../../../virt/kvm
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
write_sysreg(HSTR_T(15), HSTR);
write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
val = read_sysreg(HDCR);
- write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
+ val |= HDCR_TPM | HDCR_TPMCR; /* trap performance monitors */
+ val |= HDCR_TDRA | HDCR_TDOSA | HDCR_TDA; /* trap debug regs */
+ write_sysreg(val, HDCR);
}
static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
-#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_KVM_H
+#if !defined(_TRACE_ARM_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_ARM_KVM_H
#include <linux/tracepoint.h>
__entry->vcpu_pc, __entry->r0, __entry->imm)
);
-#endif /* _TRACE_KVM_H */
+#endif /* _TRACE_ARM_KVM_H */
#undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH arch/arm/kvm
+#define TRACE_INCLUDE_PATH .
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_FILE trace
{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
};
-static const struct of_device_id const ramc_ids[] __initconst = {
+static const struct of_device_id ramc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
unsigned result;
};
-static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
+static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
{.compatible = "brcm,kona-smc"},
{.compatible = "bcm,kona-smc"}, /* deprecated name */
{},
.power_off = csn3xxx_usb_power_off,
};
-static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
+static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
extern const struct smp_operations omap4_smp_ops;
#endif
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
+
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
extern int omap4_mpuss_init(void);
extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_get_cpu1_ns_pa_addr(void);
#else
static inline int omap4_enter_lowpower(unsigned int cpu,
unsigned int power_state)
{}
#endif
-u32 omap4_get_cpu1_ns_pa_addr(void)
-{
- return old_cpu1_ns_pa_addr;
-}
-
/**
* omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
* The purpose of this function is to manage low power programming
#endif
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+ return old_cpu1_ns_pa_addr;
+}
+
/*
* For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
* current kernel's secondary_startup() early before
cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
OMAP_AUX_CORE_BOOT_1);
- cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
/* Did the configured secondary_startup() get overwritten? */
if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
* If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
* deeper idle state in WFI and will wake to an invalid address.
*/
- if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
- !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
- needs_reset = true;
+ if ((soc_is_omap44xx() || soc_is_omap54xx())) {
+ cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+ if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+ needs_reset = true;
+ } else {
+ cpu1_ns_pa_addr = 0;
+ }
if (!needs_reset || !c->cpu1_rstctrl_va)
return;
};
#endif
-static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
#ifdef CONFIG_SOC_AM33XX
{ .compatible = "ti,am3-prcm", .data = &am3_prm_data },
#endif
u8 hsscll_12;
};
-static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
+static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = {
{
.load = 50,
.loadbits = 0x3,
setup_irq(irq, &spear_timer_irq);
}
-static const struct of_device_id const timer_of_match[] __initconst = {
+static const struct of_device_id timer_of_match[] __initconst = {
{ .compatible = "st,spear-timer", },
{ },
};
select ARMADA_AP806_SYSCON
select ARMADA_CP110_SYSCON
select ARMADA_37XX_CLK
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
select MVEBU_ODMI
select MVEBU_PIC
+ select OF_GPIO
+ select PINCTRL
+ select PINCTRL_ARMADA_37XX
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
+++ /dev/null
-../../../../arm/boot/dts
\ No newline at end of file
+++ /dev/null
-..
\ No newline at end of file
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
};
&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "okay";
gpio_exp: pca9555@22 {
&spi0 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_quad_pins>;
m25p80@0 {
compatible = "jedec,spi-nor";
/* Exported on the micro USB connector CON32 through an FTDI */
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
status = "okay";
};
};
ð0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
phy-mode = "rgmii-id";
phy = <&phy0>;
status = "okay";
#clock-cells = <1>;
};
- gpio1: gpio@13800 {
- compatible = "marvell,mvebu-gpio-3700",
+ pinctrl_nb: pinctrl@13800 {
+ compatible = "marvell,armada3710-nb-pinctrl",
"syscon", "simple-mfd";
- reg = <0x13800 0x500>;
+ reg = <0x13800 0x100>, <0x13C00 0x20>;
+ gpionb: gpio {
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_nb 0 0 36>;
+ gpio-controller;
+ interrupts =
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+ };
xtalclk: xtal-clk {
compatible = "marvell,armada-3700-xtal-clock";
clock-output-names = "xtal";
#clock-cells = <0>;
};
+
+ spi_quad_pins: spi-quad-pins {
+ groups = "spi_quad";
+ function = "spi";
+ };
+
+ i2c1_pins: i2c1-pins {
+ groups = "i2c1";
+ function = "i2c";
+ };
+
+ i2c2_pins: i2c2-pins {
+ groups = "i2c2";
+ function = "i2c";
+ };
+
+ uart1_pins: uart1-pins {
+ groups = "uart1";
+ function = "uart";
+ };
+
+ uart2_pins: uart2-pins {
+ groups = "uart2";
+ function = "uart";
+ };
+ };
+
+ pinctrl_sb: pinctrl@18800 {
+ compatible = "marvell,armada3710-sb-pinctrl",
+ "syscon", "simple-mfd";
+ reg = <0x18800 0x100>, <0x18C00 0x20>;
+ gpiosb: gpio {
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_sb 0 0 29>;
+ gpio-controller;
+ interrupts =
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rgmii_pins: mii-pins {
+ groups = "rgmii";
+ function = "mii";
+ };
+
};
eth0: ethernet@30000 {
bus-width = <8>;
max-frequency = <50000000>;
cap-mmc-highspeed;
+ mediatek,hs200-cmd-int-delay=<26>;
+ mediatek,hs400-cmd-int-delay=<14>;
+ mediatek,hs400-cmd-resp-sel-rising;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
non-removable;
/dts-v1/;
#include "rk3399-gru.dtsi"
-#include <include/dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/linux-event-codes.h>
/*
* Kevin-specific things
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_ZX=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
-CONFIG_PCI_MSI=y
CONFIG_PCI_IOV=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCIE_RCAR=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
CONFIG_ARM64_VA_BITS_48=y
CONFIG_SCHED_MC=y
CONFIG_NUMA=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_CMA=y
CONFIG_SECCOMP=y
-CONFIG_XEN=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
CONFIG_HIBERNATION=y
CONFIG_ARM_CPUIDLE=y
CONFIG_CPU_FREQ=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_VIRTIO_BLK=y
-CONFIG_EEPROM_AT25=m
CONFIG_SRAM=y
+CONFIG_EEPROM_AT25=m
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_AHCI_MVEBU=y
CONFIG_AHCI_XGENE=y
CONFIG_AHCI_QORIQ=y
-CONFIG_SATA_RCAR=y
CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
-CONFIG_MVPP2=y
CONFIG_MVNETA=y
+CONFIG_MVPP2=y
CONFIG_SKY2=y
CONFIG_RAVB=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=m
-CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MESON_GXL_PHY=m
CONFIG_MICREL_PHY=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_REALTEK_PHY=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=11
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
-CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_BCM2835=m
CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_MESON_SPIFC=m
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
-CONFIG_SPI_SPIDEV=m
CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_MAX77620=y
CONFIG_POWER_RESET_MSM=y
-CONFIG_BATTERY_BQ27XXX=y
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
-CONFIG_BCM2835_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_WATCHDOG=y
-CONFIG_BCM2835_WDT=y
-CONFIG_RENESAS_WDT=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
+CONFIG_RENESAS_WDT=y
+CONFIG_BCM2835_WDT=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
-CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
-CONFIG_MFD_HI655X_PMIC=y
-CONFIG_REGULATOR=y
-CONFIG_MFD_CROS_EC=y
-CONFIG_MFD_CROS_EC_I2C=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_EXYNOS_MIC=y
CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_HDMI=y
CONFIG_DRM_RCAR_LVDS=y
CONFIG_DRM_RCAR_VSP=y
CONFIG_DRM_TEGRA=m
-CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_VC4=m
CONFIG_DRM_HISI_KIRIN=m
CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=y
CONFIG_SND_SOC_AK4613=y
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USB_XHCI_RCAR=y
-CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_XHCI_TEGRA=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MSM=y
+CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC2=y
CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_MSM_OTG=y
+CONFIG_USB_QCOM_8X16_PHY=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_MESON_GX=y
CONFIG_MMC_SDHCI_MSM=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW_K3=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SUNXI=y
-CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_BCM2835=y
+CONFIG_MMC_SDHCI_XENON=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_S3C=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_XGENE=y
-CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=m
CONFIG_MV_XOR_V2=y
CONFIG_PL330_DMA=y
-CONFIG_DMA_BCM2835=m
CONFIG_TEGRA20_APB_DMA=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_COMMON_CLK_RK808=y
CONFIG_COMMON_CLK_SCPI=y
CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_COMMON_CLK_RK808=y
CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
CONFIG_HI6220_MBOX=y
CONFIG_ARM_SMMU=y
CONFIG_ARM_SMMU_V3=y
+CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
CONFIG_ROCKCHIP_PM_DOMAINS=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_EXTCON_USB_GPIO=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
+CONFIG_PWM_MESON=m
CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_TEGRA=m
-CONFIG_PWM_MESON=m
-CONFIG_COMMON_RESET_HI6220=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
-CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ACPI=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_PWM_SAMSUNG=y
CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_ACPI=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
CONFIG_SECURITY=y
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_DEV_SAFEXCEL=m
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
" st" #rel "xr" #sz "\t%w[tmp], %" #w "[new], %[v]\n" \
" cbnz %w[tmp], 1b\n" \
" " #mb "\n" \
- " mov %" #w "[oldval], %" #w "[old]\n" \
"2:" \
: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval), \
[v] "+Q" (*(unsigned long *)ptr) \
extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS];
+extern struct static_key_false arm64_const_caps_ready;
bool this_cpu_has_cap(unsigned int cap);
}
/* System capability check for constant caps */
-static inline bool cpus_have_const_cap(int num)
+static inline bool __cpus_have_const_cap(int num)
{
if (num >= ARM64_NCAPS)
return false;
return test_bit(num, cpu_hwcaps);
}
+static inline bool cpus_have_const_cap(int num)
+{
+ if (static_branch_likely(&arm64_const_caps_ready))
+ return __cpus_have_const_cap(num);
+ else
+ return cpus_have_cap(num);
+}
+
static inline void cpus_set_cap(unsigned int num)
{
if (num >= ARM64_NCAPS) {
num, ARM64_NCAPS);
} else {
__set_bit(num, cpu_hwcaps);
- static_branch_enable(&cpu_hwcap_keys[num]);
}
}
#include <linux/types.h>
#include <linux/kvm_types.h>
+#include <asm/cpufeature.h>
#include <asm/kvm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
unsigned long vector_ptr)
{
/*
- * Call initialization code, and switch to the full blown
- * HYP code.
+ * Call initialization code, and switch to the full blown HYP code.
+ * If the cpucaps haven't been finalized yet, something has gone very
+ * wrong, and hyp will crash and burn when it uses any
+ * cpus_have_const_cap() wrapper.
*/
+ BUG_ON(!static_branch_likely(&arm64_const_caps_ready));
__kvm_call_hyp((void *)pgd_ptr, hyp_stack_ptr, vector_ptr);
}
*/
void __init enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
{
- for (; caps->matches; caps++)
- if (caps->enable && cpus_have_cap(caps->capability))
+ for (; caps->matches; caps++) {
+ unsigned int num = caps->capability;
+
+ if (!cpus_have_cap(num))
+ continue;
+
+ /* Ensure cpus_have_const_cap(num) works */
+ static_branch_enable(&cpu_hwcap_keys[num]);
+
+ if (caps->enable) {
/*
* Use stop_machine() as it schedules the work allowing
* us to modify PSTATE, instead of on_each_cpu() which
* we return.
*/
stop_machine(caps->enable, NULL, cpu_online_mask);
+ }
+ }
}
/*
enable_cpu_capabilities(arm64_features);
}
+DEFINE_STATIC_KEY_FALSE(arm64_const_caps_ready);
+EXPORT_SYMBOL(arm64_const_caps_ready);
+
+static void __init mark_const_caps_ready(void)
+{
+ static_branch_enable(&arm64_const_caps_ready);
+}
+
/*
* Check if the current CPU has a given feature capability.
* Should be called from non-preemptible context.
/* Set the CPU feature capabilies */
setup_feature_capabilities();
enable_errata_workarounds();
+ mark_const_caps_ready();
setup_elf_hwcaps(arm64_elf_hwcaps);
if (system_supports_32bit_el0())
if (attr->exclude_idle)
return -EPERM;
- if (is_kernel_in_hyp_mode() &&
- attr->exclude_kernel != attr->exclude_hv)
- return -EINVAL;
+
+ /*
+ * If we're running in hyp mode, then we *are* the hypervisor.
+ * Therefore we ignore exclude_hv in this configuration, since
+ * there's no hypervisor to sample anyway. This is consistent
+ * with other architectures (x86 and Power).
+ */
+ if (is_kernel_in_hyp_mode()) {
+ if (!attr->exclude_kernel)
+ config_base |= ARMV8_PMU_INCLUDE_EL2;
+ } else {
+ if (attr->exclude_kernel)
+ config_base |= ARMV8_PMU_EXCLUDE_EL1;
+ if (!attr->exclude_hv)
+ config_base |= ARMV8_PMU_INCLUDE_EL2;
+ }
if (attr->exclude_user)
config_base |= ARMV8_PMU_EXCLUDE_EL0;
- if (!is_kernel_in_hyp_mode() && attr->exclude_kernel)
- config_base |= ARMV8_PMU_EXCLUDE_EL1;
- if (!attr->exclude_hv)
- config_base |= ARMV8_PMU_INCLUDE_EL2;
/*
* Install the filter into config_base as this is used to
# Makefile for Kernel-based Virtual Machine module, HYP part
#
+ccflags-y += -fno-stack-protector
+
KVM=../../../../virt/kvm
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
*/
off = offsetof(struct bpf_array, ptrs);
emit_a64_mov_i64(tmp, off, ctx);
- emit(A64_LDR64(tmp, r2, tmp), ctx);
- emit(A64_LDR64(prg, tmp, r3), ctx);
+ emit(A64_ADD(1, tmp, r2, tmp), ctx);
+ emit(A64_LSL(1, prg, r3, 3), ctx);
+ emit(A64_LDR64(prg, tmp, prg), ctx);
emit(A64_CBZ(1, prg, jmp_offset), ctx);
/* goto *(prog->bpf_func + prologue_size); */
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
+++ /dev/null
-../../../../../include/dt-bindings
\ No newline at end of file
#include <asm-generic/module.h>
+#ifdef CC_USING_MPROFILE_KERNEL
+#define MODULE_ARCH_VERMAGIC "mprofile-kernel"
+#endif
+
#ifndef __powerpc64__
/*
* Thanks to Paul M for explaining this.
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+
+#ifdef CONFIG_PPC_BOOK3S_64
+/*
+ * On hash the vmalloc and other regions alias to the kernel region when passed
+ * through __pa(), which virt_to_pfn() uses. That means virt_addr_valid() can
+ * return true for some vmalloc addresses, which is incorrect. So explicitly
+ * check that the address is in the kernel region.
+ */
+#define virt_addr_valid(kaddr) (REGION_ID(kaddr) == KERNEL_REGION_ID && \
+ pfn_valid(virt_to_pfn(kaddr)))
+#else
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
+#endif
/*
* On Book-E parts we need __va to parse the device tree and we can't
* which needs to be restored from the stack.
*/
li r3, 1
- stb r0,PACA_NAPSTATELOST(r13)
+ stb r3,PACA_NAPSTATELOST(r13)
blr
/*
save_previous_kprobe(kcb);
set_current_kprobe(p, regs, kcb);
kprobes_inc_nmissed_count(p);
- prepare_singlestep(p, regs);
kcb->kprobe_status = KPROBE_REENTER;
if (p->ainsn.boostable >= 0) {
ret = try_to_emulate(p, regs);
if (ret > 0) {
restore_previous_kprobe(kcb);
+ preempt_enable_no_resched();
return 1;
}
}
+ prepare_singlestep(p, regs);
return 1;
} else {
if (*addr != BREAKPOINT_INSTRUCTION) {
if (!MSR_TM_SUSPENDED(mfmsr()))
return;
+ /*
+ * If we are in a transaction and FP is off then we can't have
+ * used FP inside that transaction. Hence the checkpointed
+ * state is the same as the live state. We need to copy the
+ * live state to the checkpointed state so that when the
+ * transaction is restored, the checkpointed state is correct
+ * and the aborted transaction sees the correct state. We use
+ * ckpt_regs.msr here as that's what tm_reclaim will use to
+ * determine if it's going to write the checkpointed state or
+ * not. So either this will write the checkpointed registers,
+ * or reclaim will. Similarly for VMX.
+ */
+ if ((thr->ckpt_regs.msr & MSR_FP) == 0)
+ memcpy(&thr->ckfp_state, &thr->fp_state,
+ sizeof(struct thread_fp_state));
+ if ((thr->ckpt_regs.msr & MSR_VEC) == 0)
+ memcpy(&thr->ckvr_state, &thr->vr_state,
+ sizeof(struct thread_vr_state));
+
giveup_all(container_of(thr, struct task_struct, thread));
tm_reclaim(thr, thr->ckpt_regs.msr, cause);
select KVM_BOOK3S_64_HANDLER
select KVM
select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
- select SPAPR_TCE_IOMMU if IOMMU_SUPPORT
+ select SPAPR_TCE_IOMMU if IOMMU_SUPPORT && (PPC_SERIES || PPC_POWERNV)
---help---
Support running unmodified book3s_64 and book3s_32 guest kernels
in virtual machines on book3s_64 host processors.
e500_emulate.o
kvm-objs-$(CONFIG_KVM_E500MC) := $(kvm-e500mc-objs)
-kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) := \
+kvm-book3s_64-builtin-objs-$(CONFIG_SPAPR_TCE_IOMMU) := \
book3s_64_vio_hv.o
kvm-pr-y := \
book3s_xics.o
kvm-book3s_64-objs-$(CONFIG_KVM_XIVE) += book3s_xive.o
+kvm-book3s_64-objs-$(CONFIG_SPAPR_TCE_IOMMU) += book3s_64_vio.o
kvm-book3s_64-module-objs := \
$(common-objs-y) \
book3s.o \
- book3s_64_vio.o \
book3s_rtas.o \
$(kvm-book3s_64-objs-y)
/* udbg_printf("H_PUT_TCE(): liobn=0x%lx ioba=0x%lx, tce=0x%lx\n", */
/* liobn, ioba, tce); */
+ /* For radix, we might be in virtual mode, so punt */
+ if (kvm_is_radix(vcpu->kvm))
+ return H_TOO_HARD;
+
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
bool prereg = false;
struct kvmppc_spapr_tce_iommu_table *stit;
+ /* For radix, we might be in virtual mode, so punt */
+ if (kvm_is_radix(vcpu->kvm))
+ return H_TOO_HARD;
+
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
long i, ret;
struct kvmppc_spapr_tce_iommu_table *stit;
+ /* For radix, we might be in virtual mode, so punt */
+ if (kvm_is_radix(vcpu->kvm))
+ return H_TOO_HARD;
+
stt = kvmppc_find_table(vcpu->kvm, liobn);
if (!stt)
return H_TOO_HARD;
return H_SUCCESS;
}
+/* This can be called in either virtual mode or real mode */
long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
unsigned long ioba)
{
long kvmppc_h_random(struct kvm_vcpu *vcpu)
{
- if (powernv_get_random_real_mode(&vcpu->arch.gpr[4]))
+ int r;
+
+ /* Only need to do the expensive mfmsr() on radix */
+ if (kvm_is_radix(vcpu->kvm) && (mfmsr() & MSR_IR))
+ r = powernv_get_random_long(&vcpu->arch.gpr[4]);
+ else
+ r = powernv_get_random_real_mode(&vcpu->arch.gpr[4]);
+ if (r)
return H_SUCCESS;
return H_HARDWARE;
pteg_addr = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
- copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg));
+ ret = H_FUNCTION;
+ if (copy_from_user(pteg, (void __user *)pteg_addr, sizeof(pteg)))
+ goto done;
hpte = pteg;
ret = H_PTEG_FULL;
hpte[0] = cpu_to_be64(kvmppc_get_gpr(vcpu, 6));
hpte[1] = cpu_to_be64(kvmppc_get_gpr(vcpu, 7));
pteg_addr += i * HPTE_SIZE;
- copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE);
+ ret = H_FUNCTION;
+ if (copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE))
+ goto done;
kvmppc_set_gpr(vcpu, 4, pte_index | i);
ret = H_SUCCESS;
pteg = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
- copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+ ret = H_FUNCTION;
+ if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
+ goto done;
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
((flags & H_ANDCOND) && (pte[0] & avpn) != 0))
goto done;
- copy_to_user((void __user *)pteg, &v, sizeof(v));
+ ret = H_FUNCTION;
+ if (copy_to_user((void __user *)pteg, &v, sizeof(v)))
+ goto done;
rb = compute_tlbie_rb(pte[0], pte[1], pte_index);
vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
}
pteg = get_pteg_addr(vcpu, tsh & H_BULK_REMOVE_PTEX);
- copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+ if (copy_from_user(pte, (void __user *)pteg, sizeof(pte))) {
+ ret = H_FUNCTION;
+ break;
+ }
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
tsh |= H_BULK_REMOVE_NOT_FOUND;
} else {
/* Splat the pteg in (userland) hpt */
- copy_to_user((void __user *)pteg, &v, sizeof(v));
+ if (copy_to_user((void __user *)pteg, &v, sizeof(v))) {
+ ret = H_FUNCTION;
+ break;
+ }
rb = compute_tlbie_rb(pte[0], pte[1],
tsh & H_BULK_REMOVE_PTEX);
pteg = get_pteg_addr(vcpu, pte_index);
mutex_lock(&vcpu->kvm->arch.hpt_mutex);
- copy_from_user(pte, (void __user *)pteg, sizeof(pte));
+ ret = H_FUNCTION;
+ if (copy_from_user(pte, (void __user *)pteg, sizeof(pte)))
+ goto done;
pte[0] = be64_to_cpu((__force __be64)pte[0]);
pte[1] = be64_to_cpu((__force __be64)pte[1]);
vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false);
pte[0] = (__force u64)cpu_to_be64(pte[0]);
pte[1] = (__force u64)cpu_to_be64(pte[1]);
- copy_to_user((void __user *)pteg, pte, sizeof(pte));
+ ret = H_FUNCTION;
+ if (copy_to_user((void __user *)pteg, pte, sizeof(pte)))
+ goto done;
ret = H_SUCCESS;
done:
return EMULATE_DONE;
}
-static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
+static int kvmppc_h_pr_logical_ci_load(struct kvm_vcpu *vcpu)
{
- unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
- unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
- unsigned long tce = kvmppc_get_gpr(vcpu, 6);
long rc;
- rc = kvmppc_h_put_tce(vcpu, liobn, ioba, tce);
+ rc = kvmppc_h_logical_ci_load(vcpu);
if (rc == H_TOO_HARD)
return EMULATE_FAIL;
kvmppc_set_gpr(vcpu, 3, rc);
return EMULATE_DONE;
}
-static int kvmppc_h_pr_logical_ci_load(struct kvm_vcpu *vcpu)
+static int kvmppc_h_pr_logical_ci_store(struct kvm_vcpu *vcpu)
{
long rc;
- rc = kvmppc_h_logical_ci_load(vcpu);
+ rc = kvmppc_h_logical_ci_store(vcpu);
if (rc == H_TOO_HARD)
return EMULATE_FAIL;
kvmppc_set_gpr(vcpu, 3, rc);
return EMULATE_DONE;
}
-static int kvmppc_h_pr_logical_ci_store(struct kvm_vcpu *vcpu)
+#ifdef CONFIG_SPAPR_TCE_IOMMU
+static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
{
+ unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
+ unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
+ unsigned long tce = kvmppc_get_gpr(vcpu, 6);
long rc;
- rc = kvmppc_h_logical_ci_store(vcpu);
+ rc = kvmppc_h_put_tce(vcpu, liobn, ioba, tce);
if (rc == H_TOO_HARD)
return EMULATE_FAIL;
kvmppc_set_gpr(vcpu, 3, rc);
return EMULATE_DONE;
}
+#else /* CONFIG_SPAPR_TCE_IOMMU */
+static int kvmppc_h_pr_put_tce(struct kvm_vcpu *vcpu)
+{
+ return EMULATE_FAIL;
+}
+
+static int kvmppc_h_pr_put_tce_indirect(struct kvm_vcpu *vcpu)
+{
+ return EMULATE_FAIL;
+}
+
+static int kvmppc_h_pr_stuff_tce(struct kvm_vcpu *vcpu)
+{
+ return EMULATE_FAIL;
+}
+#endif /* CONFIG_SPAPR_TCE_IOMMU */
+
static int kvmppc_h_pr_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd)
{
long rc = kvmppc_xics_hcall(vcpu, cmd);
r = kvm_vm_ioctl_enable_cap(kvm, &cap);
break;
}
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_SPAPR_TCE_IOMMU
case KVM_CREATE_SPAPR_TCE_64: {
struct kvm_create_spapr_tce_64 create_tce_64;
r = kvm_vm_ioctl_create_spapr_tce(kvm, &create_tce_64);
goto out;
}
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
case KVM_PPC_GET_SMMU_INFO: {
struct kvm_ppc_smmu_info info;
struct kvm *kvm = filp->private_data;
*/
#include <linux/debugfs.h>
#include <linux/fs.h>
+#include <linux/hugetlb.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/sched.h>
for (i = 0; i < PTRS_PER_PMD; i++, pmd++) {
addr = start + i * PMD_SIZE;
- if (!pmd_none(*pmd))
+ if (!pmd_none(*pmd) && !pmd_huge(*pmd))
/* pmd exists */
walk_pte(st, pmd, addr);
else
for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
addr = start + i * PUD_SIZE;
- if (!pud_none(*pud))
+ if (!pud_none(*pud) && !pud_huge(*pud))
/* pud exists */
walk_pmd(st, pud, addr);
else
*/
for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
addr = KERN_VIRT_START + i * PGDIR_SIZE;
- if (!pgd_none(*pgd))
+ if (!pgd_none(*pgd) && !pgd_huge(*pgd))
/* pgd exists */
walk_pud(st, pgd, addr);
else
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/time.h>
+#include <linux/refcount.h>
#include <uapi/asm/debug.h>
#define DEBUG_MAX_LEVEL 6 /* debug levels range from 0 to 6 */
typedef struct debug_info {
struct debug_info* next;
struct debug_info* prev;
- atomic_t ref_count;
+ refcount_t ref_count;
spinlock_t lock;
int level;
int nr_areas;
return ((((int) code + 64) >> 7) + 1) << 1;
}
+struct pt_regs;
+
void show_code(struct pt_regs *regs);
void print_fn_code(unsigned char *code, unsigned long len);
int insn_to_mnemonic(unsigned char *instruction, char *buf, unsigned int len);
* 2005-Dec Used as a template for s390 by Mike Grundy
* <grundym@us.ibm.com>
*/
+#include <linux/types.h>
#include <asm-generic/kprobes.h>
#define BREAKPOINT_INSTRUCTION 0x0002
+#define FIXUP_PSW_NORMAL 0x08
+#define FIXUP_BRANCH_NOT_TAKEN 0x04
+#define FIXUP_RETURN_REGISTER 0x02
+#define FIXUP_NOT_REQUIRED 0x01
+
+int probe_is_prohibited_opcode(u16 *insn);
+int probe_get_fixup_type(u16 *insn);
+int probe_is_insn_relative_long(u16 *insn);
+
#ifdef CONFIG_KPROBES
-#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/percpu.h>
#include <linux/sched/task_stack.h>
#define KPROBE_SWAP_INST 0x10
-#define FIXUP_PSW_NORMAL 0x08
-#define FIXUP_BRANCH_NOT_TAKEN 0x04
-#define FIXUP_RETURN_REGISTER 0x02
-#define FIXUP_NOT_REQUIRED 0x01
-
/* Architecture specific copy of original instruction */
struct arch_specific_insn {
/* copy of original instruction */
int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
-int probe_is_prohibited_opcode(u16 *insn);
-int probe_get_fixup_type(u16 *insn);
-int probe_is_insn_relative_long(u16 *insn);
-
#define flush_insn_slot(p) do { } while (0)
#endif /* CONFIG_KPROBES */
* Returns the maximum nesting level supported by the cpu topology code.
* The current maximum level is 4 which is the drawer level.
*/
-static inline int topology_mnest_limit(void)
+static inline unsigned char topology_mnest_limit(void)
{
return min(topology_max_mnest, 4);
}
memset(rc->views, 0, DEBUG_MAX_VIEWS * sizeof(struct debug_view *));
memset(rc->debugfs_entries, 0 ,DEBUG_MAX_VIEWS *
sizeof(struct dentry*));
- atomic_set(&(rc->ref_count), 0);
+ refcount_set(&(rc->ref_count), 0);
return rc;
debug_area_last = rc;
rc->next = NULL;
- debug_info_get(rc);
+ refcount_set(&rc->ref_count, 1);
out:
return rc;
}
debug_info_get(debug_info_t * db_info)
{
if (db_info)
- atomic_inc(&db_info->ref_count);
+ refcount_inc(&db_info->ref_count);
}
/*
if (!db_info)
return;
- if (atomic_dec_and_test(&db_info->ref_count)) {
+ if (refcount_dec_and_test(&db_info->ref_count)) {
for (i = 0; i < DEBUG_MAX_VIEWS; i++) {
if (!db_info->views[i])
continue;
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
+.Lsysc_exit_timer:
stpt __LC_EXIT_TIMER
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
lmg %r11,%r15,__PT_R11(%r11)
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
+.Lio_exit_timer:
stpt __LC_EXIT_TIMER
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
lmg %r11,%r15,__PT_R11(%r11)
br %r14
.Lcleanup_sysc_restore:
+ # check if stpt has been executed
clg %r9,BASED(.Lcleanup_sysc_restore_insn)
+ jh 0f
+ mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
+ cghi %r11,__LC_SAVE_AREA_ASYNC
je 0f
+ mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+0: clg %r9,BASED(.Lcleanup_sysc_restore_insn+8)
+ je 1f
lg %r9,24(%r11) # get saved pointer to pt_regs
mvc __LC_RETURN_PSW(16),__PT_PSW(%r9)
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
-0: lmg %r8,%r9,__LC_RETURN_PSW
+1: lmg %r8,%r9,__LC_RETURN_PSW
br %r14
.Lcleanup_sysc_restore_insn:
+ .quad .Lsysc_exit_timer
.quad .Lsysc_done - 4
.Lcleanup_io_tif:
br %r14
.Lcleanup_io_restore:
+ # check if stpt has been executed
clg %r9,BASED(.Lcleanup_io_restore_insn)
- je 0f
+ jh 0f
+ mvc __LC_EXIT_TIMER(8),__LC_MCCK_ENTER_TIMER
+0: clg %r9,BASED(.Lcleanup_io_restore_insn+8)
+ je 1f
lg %r9,24(%r11) # get saved r11 pointer to pt_regs
mvc __LC_RETURN_PSW(16),__PT_PSW(%r9)
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
-0: lmg %r8,%r9,__LC_RETURN_PSW
+1: lmg %r8,%r9,__LC_RETURN_PSW
br %r14
.Lcleanup_io_restore_insn:
+ .quad .Lio_exit_timer
.quad .Lio_done - 4
.Lcleanup_idle:
return 0;
}
+#ifdef CONFIG_MODULES
+
static int __init ftrace_plt_init(void)
{
unsigned int *ip;
}
device_initcall(ftrace_plt_init);
+#endif /* CONFIG_MODULES */
+
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/*
* Hook the return address and push it in the stack of return addresses
{
. = 0x00000000;
.text : {
- _text = .; /* Text and read-only data */
+ /* Text and read-only data */
HEAD_TEXT
+ /*
+ * E.g. perf doesn't like symbols starting at address zero,
+ * therefore skip the initial PSW and channel program located
+ * at address zero and let _text start at 0x200.
+ */
+ _text = 0x200;
TEXT_TEXT
SCHED_TEXT
CPUIDLE_TEXT
* Copyright IBM Corp. 2014
*/
+#include <linux/errno.h>
#include <asm/kprobes.h>
#include <asm/dis.h>
return 0;
done = 0;
do {
- offset = (size_t)src & ~PAGE_MASK;
- len = min(size - done, PAGE_SIZE - offset);
+ offset = (size_t)src & (L1_CACHE_BYTES - 1);
+ len = min(size - done, L1_CACHE_BYTES - offset);
if (copy_from_user(dst, src, len))
return -EFAULT;
len_str = strnlen(dst, len);
static inline int prepare_hugepage_range(struct file *file,
unsigned long addr, unsigned long len)
{
- if (len & ~HPAGE_MASK)
+ struct hstate *h = hstate_file(file);
+
+ if (len & ~huge_page_mask(h))
return -EINVAL;
- if (addr & ~HPAGE_MASK)
+ if (addr & ~huge_page_mask(h))
return -EINVAL;
return 0;
}
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-extern unsigned long empty_zero_page;
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
-#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
/*
* In general all page table modifications should use the V8 atomic
*/
extern unsigned char boot_cpu_id;
-extern unsigned long empty_zero_page;
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
extern int serial_console;
static inline int con_is_present(void)
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
return parent + 8UL;
- if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
- frame_pointer, NULL) == -EBUSY)
- return parent + 8UL;
-
trace.func = self_addr;
+ trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to */
- if (!ftrace_graph_entry(&trace)) {
- current->curr_ret_stack--;
+ if (!ftrace_graph_entry(&trace))
+ return parent + 8UL;
+
+ if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
+ frame_pointer, NULL) == -EBUSY)
return parent + 8UL;
- }
return return_hooker;
}
/* Saves us work later. */
- memset((void *)&empty_zero_page, 0, PAGE_SIZE);
+ memset((void *)empty_zero_page, 0, PAGE_SIZE);
i = last_valid_pfn >> ((20 - PAGE_SHIFT) + 5);
i += 1;
#define KVM_PRIVATE_MEM_SLOTS 3
#define KVM_MEM_SLOTS_NUM (KVM_USER_MEM_SLOTS + KVM_PRIVATE_MEM_SLOTS)
-#define KVM_HALT_POLL_NS_DEFAULT 400000
+#define KVM_HALT_POLL_NS_DEFAULT 200000
#define KVM_IRQCHIP_NUM_PINS KVM_IOAPIC_NUM_PINS
#define __get_user_asm_u64(x, ptr, retval, errret) \
({ \
__typeof__(ptr) __ptr = (ptr); \
- asm volatile(ASM_STAC "\n" \
+ asm volatile("\n" \
"1: movl %2,%%eax\n" \
"2: movl %3,%%edx\n" \
- "3: " ASM_CLAC "\n" \
+ "3:\n" \
".section .fixup,\"ax\"\n" \
"4: mov %4,%0\n" \
" xorl %%eax,%%eax\n" \
".previous\n" \
_ASM_EXTABLE(1b, 4b) \
_ASM_EXTABLE(2b, 4b) \
- : "=r" (retval), "=A"(x) \
+ : "=r" (retval), "=&A"(x) \
: "m" (__m(__ptr)), "m" __m(((u32 *)(__ptr)) + 1), \
"i" (errret), "0" (retval)); \
})
#define unsafe_put_user(x, ptr, err_label) \
do { \
int __pu_err; \
- __put_user_size((x), (ptr), sizeof(*(ptr)), __pu_err, -EFAULT); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ __put_user_size(__pu_val, (ptr), sizeof(*(ptr)), __pu_err, -EFAULT); \
if (unlikely(__pu_err)) goto err_label; \
} while (0)
#define unsafe_get_user(x, ptr, err_label) \
do { \
int __gu_err; \
- unsigned long __gu_val; \
+ __inttype(*(ptr)) __gu_val; \
__get_user_size(__gu_val, (ptr), sizeof(*(ptr)), __gu_err, -EFAULT); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
if (unlikely(__gu_err)) goto err_label; \
* Boot time FPU feature detection code:
*/
unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
+EXPORT_SYMBOL_GPL(mxcsr_feature_mask);
static void __init fpu__init_system_mxcsr(void)
{
static int check_svme(struct x86_emulate_ctxt *ctxt)
{
- u64 efer;
+ u64 efer = 0;
ctxt->ops->get_msr(ctxt, MSR_EFER, &efer);
pt_element_t pte;
pt_element_t __user *uninitialized_var(ptep_user);
gfn_t table_gfn;
- unsigned index, pt_access, pte_access, accessed_dirty, pte_pkey;
+ u64 pt_access, pte_access;
+ unsigned index, accessed_dirty, pte_pkey;
unsigned nested_access;
gpa_t pte_gpa;
bool have_ad;
int offset;
+ u64 walk_nx_mask = 0;
const int write_fault = access & PFERR_WRITE_MASK;
const int user_fault = access & PFERR_USER_MASK;
const int fetch_fault = access & PFERR_FETCH_MASK;
have_ad = PT_HAVE_ACCESSED_DIRTY(mmu);
#if PTTYPE == 64
+ walk_nx_mask = 1ULL << PT64_NX_SHIFT;
if (walker->level == PT32E_ROOT_LEVEL) {
pte = mmu->get_pdptr(vcpu, (addr >> 30) & 3);
trace_kvm_mmu_paging_element(pte, walker->level);
walker->max_level = walker->level;
ASSERT(!(is_long_mode(vcpu) && !is_pae(vcpu)));
- accessed_dirty = have_ad ? PT_GUEST_ACCESSED_MASK : 0;
-
/*
* FIXME: on Intel processors, loads of the PDPTE registers for PAE paging
* by the MOV to CR instruction are treated as reads and do not cause the
*/
nested_access = (have_ad ? PFERR_WRITE_MASK : 0) | PFERR_USER_MASK;
- pt_access = pte_access = ACC_ALL;
+ pte_access = ~0;
++walker->level;
do {
gfn_t real_gfn;
unsigned long host_addr;
- pt_access &= pte_access;
+ pt_access = pte_access;
--walker->level;
index = PT_INDEX(addr, walker->level);
trace_kvm_mmu_paging_element(pte, walker->level);
+ /*
+ * Inverting the NX it lets us AND it like other
+ * permission bits.
+ */
+ pte_access = pt_access & (pte ^ walk_nx_mask);
+
if (unlikely(!FNAME(is_present_gpte)(pte)))
goto error;
goto error;
}
- accessed_dirty &= pte;
- pte_access = pt_access & FNAME(gpte_access)(vcpu, pte);
-
walker->ptes[walker->level - 1] = pte;
} while (!is_last_gpte(mmu, walker->level, pte));
pte_pkey = FNAME(gpte_pkeys)(vcpu, pte);
- errcode = permission_fault(vcpu, mmu, pte_access, pte_pkey, access);
+ accessed_dirty = have_ad ? pte_access & PT_GUEST_ACCESSED_MASK : 0;
+
+ /* Convert to ACC_*_MASK flags for struct guest_walker. */
+ walker->pt_access = FNAME(gpte_access)(vcpu, pt_access ^ walk_nx_mask);
+ walker->pte_access = FNAME(gpte_access)(vcpu, pte_access ^ walk_nx_mask);
+ errcode = permission_fault(vcpu, mmu, walker->pte_access, pte_pkey, access);
if (unlikely(errcode))
goto error;
walker->gfn = real_gpa >> PAGE_SHIFT;
if (!write_fault)
- FNAME(protect_clean_gpte)(mmu, &pte_access, pte);
+ FNAME(protect_clean_gpte)(mmu, &walker->pte_access, pte);
else
/*
* On a write fault, fold the dirty bit into accessed_dirty.
goto retry_walk;
}
- walker->pt_access = pt_access;
- walker->pte_access = pte_access;
pgprintk("%s: pte %llx pte_access %x pt_access %x\n",
- __func__, (u64)pte, pte_access, pt_access);
+ __func__, (u64)pte, walker->pte_access, walker->pt_access);
return 1;
error:
*/
if (!(errcode & PFERR_RSVD_MASK)) {
vcpu->arch.exit_qualification &= 0x187;
- vcpu->arch.exit_qualification |= ((pt_access & pte) & 0x7) << 3;
+ vcpu->arch.exit_qualification |= (pte_access & 0x7) << 3;
}
#endif
walker->fault.address = addr;
((u64)1 << edx.split.bit_width_fixed) - 1;
}
- pmu->global_ctrl = ((1 << pmu->nr_arch_gp_counters) - 1) |
+ pmu->global_ctrl = ((1ull << pmu->nr_arch_gp_counters) - 1) |
(((1ull << pmu->nr_arch_fixed_counters) - 1) << INTEL_PMC_IDX_FIXED);
pmu->global_ctrl_mask = ~pmu->global_ctrl;
}
-static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu, int index)
+static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
+ unsigned int index)
{
u64 *avic_physical_id_table;
struct kvm_arch *vm_data = &vcpu->kvm->arch;
enable_ept_ad_bits = 0;
}
- if (!cpu_has_vmx_ept_ad_bits())
+ if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
enable_ept_ad_bits = 0;
if (!cpu_has_vmx_unrestricted_guest())
if (!nested_cpu_has_pml(vmcs12))
return 0;
- if (vmcs12->guest_pml_index > PML_ENTITY_NUM) {
+ if (vmcs12->guest_pml_index >= PML_ENTITY_NUM) {
vmx->nested.pml_full = true;
return 1;
}
{
struct kvm_arch *ka = &kvm->arch;
struct pvclock_vcpu_time_info hv_clock;
+ u64 ret;
spin_lock(&ka->pvclock_gtod_sync_lock);
if (!ka->use_master_clock) {
hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
spin_unlock(&ka->pvclock_gtod_sync_lock);
+ /* both __this_cpu_read() and rdtsc() should be on the same cpu */
+ get_cpu();
+
kvm_get_time_scale(NSEC_PER_SEC, __this_cpu_read(cpu_tsc_khz) * 1000LL,
&hv_clock.tsc_shift,
&hv_clock.tsc_to_system_mul);
- return __pvclock_read_cycles(&hv_clock, rdtsc());
+ ret = __pvclock_read_cycles(&hv_clock, rdtsc());
+
+ put_cpu();
+
+ return ret;
}
static void kvm_setup_pvclock_page(struct kvm_vcpu *v)
}
}
+#define XSAVE_MXCSR_OFFSET 24
+
static int kvm_vcpu_ioctl_x86_set_xsave(struct kvm_vcpu *vcpu,
struct kvm_xsave *guest_xsave)
{
u64 xstate_bv =
*(u64 *)&guest_xsave->region[XSAVE_HDR_OFFSET / sizeof(u32)];
+ u32 mxcsr = *(u32 *)&guest_xsave->region[XSAVE_MXCSR_OFFSET / sizeof(u32)];
if (boot_cpu_has(X86_FEATURE_XSAVE)) {
/*
* CPUID leaf 0xD, index 0, EDX:EAX. This is for compatibility
* with old userspace.
*/
- if (xstate_bv & ~kvm_supported_xcr0())
+ if (xstate_bv & ~kvm_supported_xcr0() ||
+ mxcsr & ~mxcsr_feature_mask)
return -EINVAL;
load_xsave(vcpu, (u8 *)guest_xsave->region);
} else {
- if (xstate_bv & ~XFEATURE_MASK_FPSSE)
+ if (xstate_bv & ~XFEATURE_MASK_FPSSE ||
+ mxcsr & ~mxcsr_feature_mask)
return -EINVAL;
memcpy(&vcpu->arch.guest_fpu.state.fxsave,
guest_xsave->region, sizeof(struct fxregs_state));
static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
{
- /* TODO: String I/O for in kernel device */
- int r;
+ int r = 0, i;
- if (vcpu->arch.pio.in)
- r = kvm_io_bus_read(vcpu, KVM_PIO_BUS, vcpu->arch.pio.port,
- vcpu->arch.pio.size, pd);
- else
- r = kvm_io_bus_write(vcpu, KVM_PIO_BUS,
- vcpu->arch.pio.port, vcpu->arch.pio.size,
- pd);
+ for (i = 0; i < vcpu->arch.pio.count; i++) {
+ if (vcpu->arch.pio.in)
+ r = kvm_io_bus_read(vcpu, KVM_PIO_BUS, vcpu->arch.pio.port,
+ vcpu->arch.pio.size, pd);
+ else
+ r = kvm_io_bus_write(vcpu, KVM_PIO_BUS,
+ vcpu->arch.pio.port, vcpu->arch.pio.size,
+ pd);
+ if (r)
+ break;
+ pd += vcpu->arch.pio.size;
+ }
return r;
}
if (vcpu->arch.pio.count)
goto data_avail;
+ memset(vcpu->arch.pio_data, 0, size * count);
+
ret = emulator_pio_in_out(vcpu, size, port, val, count, true);
if (ret) {
data_avail:
if (var.unusable) {
memset(desc, 0, sizeof(*desc));
+ if (base3)
+ *base3 = 0;
return false;
}
struct xen_extraversion extra;
HYPERVISOR_xen_version(XENVER_extraversion, &extra);
- pr_info("Booting paravirtualized kernel %son %s\n",
- xen_feature(XENFEAT_auto_translated_physmap) ?
- "with PVH extensions " : "", pv_info.name);
+ pr_info("Booting paravirtualized kernel on %s\n", pv_info.name);
printk(KERN_INFO "Xen version: %d.%d%s%s\n",
version >> 16, version & 0xffff, extra.extraversion,
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
void xen_setup_shared_info(void)
{
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- set_fixmap(FIX_PARAVIRT_BOOTMAP,
- xen_start_info->shared_info);
+ set_fixmap(FIX_PARAVIRT_BOOTMAP, xen_start_info->shared_info);
- HYPERVISOR_shared_info =
- (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
- } else
- HYPERVISOR_shared_info =
- (struct shared_info *)__va(xen_start_info->shared_info);
+ HYPERVISOR_shared_info =
+ (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
#ifndef CONFIG_SMP
/* In UP this is as good a place as any to set up shared info */
}
EXPORT_SYMBOL_GPL(arbitrary_virt_to_machine);
-void xen_flush_tlb_all(void)
+static void xen_flush_tlb_all(void)
{
struct mmuext_op *op;
struct multicall_space mcs;
pteval_t flags = val & PTE_FLAGS_MASK;
unsigned long mfn;
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- mfn = __pfn_to_mfn(pfn);
- else
- mfn = pfn;
+ mfn = __pfn_to_mfn(pfn);
+
/*
* If there's no mfn for the pfn, then just create an
* empty non-present pte. Unfortunately this loses
limit--;
BUG_ON(limit >= FIXADDR_TOP);
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return 0;
-
/*
* 64-bit has a great big hole in the middle of the address
* space, which contains the Xen mappings. On 32-bit these
static void __init xen_pagetable_p2m_setup(void)
{
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
xen_vmalloc_p2m_tree();
#ifdef CONFIG_X86_64
xen_build_mfn_list_list();
/* Remap memory freed due to conflicts with E820 map */
- if (!xen_feature(XENFEAT_auto_translated_physmap))
- xen_remap_memory();
+ xen_remap_memory();
xen_setup_shared_info();
}
/* Zap identity mapping */
init_level4_pgt[0] = __pgd(0);
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- /* Pre-constructed entries are in pfn, so convert to mfn */
- /* L4[272] -> level3_ident_pgt
- * L4[511] -> level3_kernel_pgt */
- convert_pfn_mfn(init_level4_pgt);
+ /* Pre-constructed entries are in pfn, so convert to mfn */
+ /* L4[272] -> level3_ident_pgt */
+ /* L4[511] -> level3_kernel_pgt */
+ convert_pfn_mfn(init_level4_pgt);
- /* L3_i[0] -> level2_ident_pgt */
- convert_pfn_mfn(level3_ident_pgt);
- /* L3_k[510] -> level2_kernel_pgt
- * L3_k[511] -> level2_fixmap_pgt */
- convert_pfn_mfn(level3_kernel_pgt);
+ /* L3_i[0] -> level2_ident_pgt */
+ convert_pfn_mfn(level3_ident_pgt);
+ /* L3_k[510] -> level2_kernel_pgt */
+ /* L3_k[511] -> level2_fixmap_pgt */
+ convert_pfn_mfn(level3_kernel_pgt);
+
+ /* L3_k[511][506] -> level1_fixmap_pgt */
+ convert_pfn_mfn(level2_fixmap_pgt);
- /* L3_k[511][506] -> level1_fixmap_pgt */
- convert_pfn_mfn(level2_fixmap_pgt);
- }
/* We get [511][511] and have Xen's version of level2_kernel_pgt */
l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
if (i && i < pgd_index(__START_KERNEL_map))
init_level4_pgt[i] = ((pgd_t *)xen_start_info->pt_base)[i];
- if (!xen_feature(XENFEAT_auto_translated_physmap)) {
- /* Make pagetable pieces RO */
- set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
- set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
- set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
- set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
- set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
- set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
- set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
- set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO);
-
- /* Pin down new L4 */
- pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
- PFN_DOWN(__pa_symbol(init_level4_pgt)));
-
- /* Unpin Xen-provided one */
- pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+ /* Make pagetable pieces RO */
+ set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+ set_page_prot(level2_ident_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+ set_page_prot(level1_fixmap_pgt, PAGE_KERNEL_RO);
+
+ /* Pin down new L4 */
+ pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+ PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+ /* Unpin Xen-provided one */
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
- /*
- * At this stage there can be no user pgd, and no page
- * structure to attach it to, so make sure we just set kernel
- * pgd.
- */
- xen_mc_batch();
- __xen_write_cr3(true, __pa(init_level4_pgt));
- xen_mc_issue(PARAVIRT_LAZY_CPU);
- } else
- native_write_cr3(__pa(init_level4_pgt));
+ /*
+ * At this stage there can be no user pgd, and no page structure to
+ * attach it to, so make sure we just set kernel pgd.
+ */
+ xen_mc_batch();
+ __xen_write_cr3(true, __pa(init_level4_pgt));
+ xen_mc_issue(PARAVIRT_LAZY_CPU);
/* We can't that easily rip out L3 and L2, as the Xen pagetables are
* set out this way: [L4], [L1], [L2], [L3], [L1], [L1] ... for
static void __init xen_post_allocator_init(void)
{
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
pv_mmu_ops.set_pte = xen_set_pte;
pv_mmu_ops.set_pmd = xen_set_pmd;
pv_mmu_ops.set_pud = xen_set_pud;
{
x86_init.paging.pagetable_init = xen_pagetable_init;
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
pv_mmu_ops = xen_mmu_ops;
memset(dummy_mapping, 0xff, PAGE_SIZE);
* this function are redundant and can be ignored.
*/
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return 0;
-
if (unlikely(order > MAX_CONTIG_ORDER))
return -ENOMEM;
int success;
unsigned long vstart;
- if (xen_feature(XENFEAT_auto_translated_physmap))
- return;
-
if (unlikely(order > MAX_CONTIG_ORDER))
return;
return 0;
}
+static int skcipher_setkey_unaligned(struct crypto_skcipher *tfm,
+ const u8 *key, unsigned int keylen)
+{
+ unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+ struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+ u8 *buffer, *alignbuffer;
+ unsigned long absize;
+ int ret;
+
+ absize = keylen + alignmask;
+ buffer = kmalloc(absize, GFP_ATOMIC);
+ if (!buffer)
+ return -ENOMEM;
+
+ alignbuffer = (u8 *)ALIGN((unsigned long)buffer, alignmask + 1);
+ memcpy(alignbuffer, key, keylen);
+ ret = cipher->setkey(tfm, alignbuffer, keylen);
+ kzfree(buffer);
+ return ret;
+}
+
+static int skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct skcipher_alg *cipher = crypto_skcipher_alg(tfm);
+ unsigned long alignmask = crypto_skcipher_alignmask(tfm);
+
+ if (keylen < cipher->min_keysize || keylen > cipher->max_keysize) {
+ crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+
+ if ((unsigned long)key & alignmask)
+ return skcipher_setkey_unaligned(tfm, key, keylen);
+
+ return cipher->setkey(tfm, key, keylen);
+}
+
static void crypto_skcipher_exit_tfm(struct crypto_tfm *tfm)
{
struct crypto_skcipher *skcipher = __crypto_skcipher_cast(tfm);
tfm->__crt_alg->cra_type == &crypto_givcipher_type)
return crypto_init_skcipher_ops_ablkcipher(tfm);
- skcipher->setkey = alg->setkey;
+ skcipher->setkey = skcipher_setkey;
skcipher->encrypt = alg->encrypt;
skcipher->decrypt = alg->decrypt;
skcipher->ivsize = alg->ivsize;
#define ACPI_BUTTON_LID_INIT_IGNORE 0x00
#define ACPI_BUTTON_LID_INIT_OPEN 0x01
+#define ACPI_BUTTON_LID_INIT_METHOD 0x02
#define _COMPONENT ACPI_BUTTON_COMPONENT
ACPI_MODULE_NAME("button");
case ACPI_BUTTON_LID_INIT_OPEN:
(void)acpi_lid_notify_state(device, 1);
break;
+ case ACPI_BUTTON_LID_INIT_METHOD:
+ (void)acpi_lid_update_state(device);
+ break;
case ACPI_BUTTON_LID_INIT_IGNORE:
default:
break;
if (!strncmp(val, "open", sizeof("open") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
pr_info("Notify initial lid state as open\n");
+ } else if (!strncmp(val, "method", sizeof("method") - 1)) {
+ lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+ pr_info("Notify initial lid state with _LID return value\n");
} else if (!strncmp(val, "ignore", sizeof("ignore") - 1)) {
lid_init_state = ACPI_BUTTON_LID_INIT_IGNORE;
pr_info("Do not notify initial lid state\n");
switch (lid_init_state) {
case ACPI_BUTTON_LID_INIT_OPEN:
return sprintf(buffer, "open");
+ case ACPI_BUTTON_LID_INIT_METHOD:
+ return sprintf(buffer, "method");
case ACPI_BUTTON_LID_INIT_IGNORE:
return sprintf(buffer, "ignore");
default:
/**
* wakup_source_activate - Mark given wakeup source as active.
* @ws: Wakeup source to handle.
- * @hard: If set, abort suspends in progress and wake up from suspend-to-idle.
*
* Update the @ws' statistics and, if @ws has just been activated, notify the PM
* core of the event by incrementing the counter of of wakeup events being
* processed.
*/
-static void wakeup_source_activate(struct wakeup_source *ws, bool hard)
+static void wakeup_source_activate(struct wakeup_source *ws)
{
unsigned int cec;
"unregistered wakeup source\n"))
return;
- if (hard)
- pm_system_wakeup();
-
ws->active = true;
ws->active_count++;
ws->last_time = ktime_get();
ws->wakeup_count++;
if (!ws->active)
- wakeup_source_activate(ws, hard);
+ wakeup_source_activate(ws);
+
+ if (hard)
+ pm_system_wakeup();
}
/**
}
/* still holds resource->req_lock */
-static int drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put)
+static void drbd_req_put_completion_ref(struct drbd_request *req, struct bio_and_error *m, int put)
{
struct drbd_device *device = req->device;
D_ASSERT(device, m || (req->rq_state & RQ_POSTPONED));
+ if (!put)
+ return;
+
if (!atomic_sub_and_test(put, &req->completion_ref))
- return 0;
+ return;
drbd_req_complete(req, m);
+ /* local completion may still come in later,
+ * we need to keep the req object around. */
+ if (req->rq_state & RQ_LOCAL_ABORTED)
+ return;
+
if (req->rq_state & RQ_POSTPONED) {
/* don't destroy the req object just yet,
* but queue it for retry */
drbd_restart_request(req);
- return 0;
+ return;
}
- return 1;
+ kref_put(&req->kref, drbd_req_destroy);
}
static void set_if_null_req_next(struct drbd_peer_device *peer_device, struct drbd_request *req)
if (req->i.waiting)
wake_up(&device->misc_wait);
- if (c_put) {
- if (drbd_req_put_completion_ref(req, m, c_put))
- kref_put(&req->kref, drbd_req_destroy);
- } else {
- kref_put(&req->kref, drbd_req_destroy);
- }
+ drbd_req_put_completion_ref(req, m, c_put);
+ kref_put(&req->kref, drbd_req_destroy);
}
static void drbd_report_io_error(struct drbd_device *device, struct drbd_request *req)
}
out:
- if (drbd_req_put_completion_ref(req, &m, 1))
- kref_put(&req->kref, drbd_req_destroy);
+ drbd_req_put_completion_ref(req, &m, 1);
spin_unlock_irq(&resource->req_lock);
/* Even though above is a kref_put(), this is safe.
dev_set_drvdata(&dev->dev, NULL);
- if (be->blkif)
+ if (be->blkif) {
xen_blkif_disconnect(be->blkif);
- /* Put the reference we set in xen_blkif_alloc(). */
- xen_blkif_put(be->blkif);
+ /* Put the reference we set in xen_blkif_alloc(). */
+ xen_blkif_put(be->blkif);
+ }
+
kfree(be->mode);
kfree(be);
return 0;
} else if (!strcmp(str, "auto")) {
parport_nr[0] = LP_PARPORT_AUTO;
} else if (!strcmp(str, "none")) {
- parport_nr[parport_ptr++] = LP_PARPORT_NONE;
+ if (parport_ptr < LP_NO)
+ parport_nr[parport_ptr++] = LP_PARPORT_NONE;
+ else
+ printk(KERN_INFO "lp: too many ports, %s ignored.\n",
+ str);
} else if (!strcmp(str, "reset")) {
reset = 1;
}
static int mmap_mem(struct file *file, struct vm_area_struct *vma)
{
size_t size = vma->vm_end - vma->vm_start;
+ phys_addr_t offset = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
+
+ /* It's illegal to wrap around the end of the physical address space. */
+ if (offset + (phys_addr_t)size < offset)
+ return -EINVAL;
if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
return -EINVAL;
If in doubt, say N.
+config ARM_DB8500_CPUFREQ
+ tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
+ default ARCH_U8500
+ depends on HAS_IOMEM
+ depends on !CPU_THERMAL || THERMAL
+ help
+ This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
+ series.
+
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
-obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
+obj-$(CONFIG_ARM_DB8500_CPUFREQ) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
}
EXPORT_SYMBOL_GPL(dax_read_unlock);
+#ifdef CONFIG_BLOCK
int bdev_dax_pgoff(struct block_device *bdev, sector_t sector, size_t size,
pgoff_t *pgoff)
{
return 0;
}
EXPORT_SYMBOL_GPL(__bdev_dax_supported);
+#endif
/**
* struct dax_device - anchor object for dax services
static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl)
{
- u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases;
- int dimm, size0, size1;
+ int dimm, size0, size1, cs0, cs1;
edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl);
for (dimm = 0; dimm < 4; dimm++) {
size0 = 0;
+ cs0 = dimm * 2;
- if (dcsb[dimm*2] & DCSB_CS_ENABLE)
- size0 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, dimm);
+ if (csrow_enabled(cs0, ctrl, pvt))
+ size0 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs0);
size1 = 0;
- if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
- size1 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, dimm);
+ cs1 = dimm * 2 + 1;
+
+ if (csrow_enabled(cs1, ctrl, pvt))
+ size1 = pvt->ops->dbam_to_cs(pvt, ctrl, 0, cs1);
amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
- dimm * 2, size0,
- dimm * 2 + 1, size1);
+ cs0, size0,
+ cs1, size1);
}
}
* encompasses
*
*/
-static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr)
+static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig)
{
- u32 cs_mode, nr_pages;
u32 dbam = dct ? pvt->dbam1 : pvt->dbam0;
+ int csrow_nr = csrow_nr_orig;
+ u32 cs_mode, nr_pages;
+ if (!pvt->umc)
+ csrow_nr >>= 1;
- /*
- * The math on this doesn't look right on the surface because x/2*4 can
- * be simplified to x*2 but this expression makes use of the fact that
- * it is integral math where 1/2=0. This intermediate value becomes the
- * number of bits to shift the DBAM register to extract the proper CSROW
- * field.
- */
- cs_mode = DBAM_DIMM(csrow_nr / 2, dbam);
+ cs_mode = DBAM_DIMM(csrow_nr, dbam);
- nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, (csrow_nr / 2))
- << (20 - PAGE_SHIFT);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, csrow_nr);
+ nr_pages <<= 20 - PAGE_SHIFT;
edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
- csrow_nr, dct, cs_mode);
+ csrow_nr_orig, dct, cs_mode);
edac_dbg(0, "nr_pages/channel: %u\n", nr_pages);
return nr_pages;
if (sscanf(name, "dump-type%u-%u-%d-%lu-%c",
&record->type, &part, &cnt, &time, &data_type) == 5) {
record->id = generic_id(time, part, cnt);
+ record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
} else if (sscanf(name, "dump-type%u-%u-%d-%lu",
&record->type, &part, &cnt, &time) == 4) {
record->id = generic_id(time, part, cnt);
+ record->part = part;
record->count = cnt;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
* multiple logs, remains.
*/
record->id = generic_id(time, part, 0);
+ record->part = part;
record->count = 0;
record->time.tv_sec = time;
record->time.tv_nsec = 0;
* efi_pstore_sysfs_entry_iter
*
* @record: pstore record to pass to callback
- * @pos: entry to begin iterating from
*
* You MUST call efivar_enter_iter_begin() before this function, and
* efivar_entry_iter_end() afterwards.
*
- * It is possible to begin iteration from an arbitrary entry within
- * the list by passing @pos. @pos is updated on return to point to
- * the next entry of the last one passed to efi_pstore_read_func().
- * To begin iterating from the beginning of the list @pos must be %NULL.
*/
-static int efi_pstore_sysfs_entry_iter(struct pstore_record *record,
- struct efivar_entry **pos)
+static int efi_pstore_sysfs_entry_iter(struct pstore_record *record)
{
+ struct efivar_entry **pos = (struct efivar_entry **)&record->psi->data;
struct efivar_entry *entry, *n;
struct list_head *head = &efivar_sysfs_list;
int size = 0;
*/
static ssize_t efi_pstore_read(struct pstore_record *record)
{
- struct efivar_entry *entry = (struct efivar_entry *)record->psi->data;
ssize_t size;
record->buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL);
size = -EINTR;
goto out;
}
- size = efi_pstore_sysfs_entry_iter(record, &entry);
+ size = efi_pstore_sysfs_entry_iter(record);
efivar_entry_iter_end();
out:
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
int i, ret = 0;
+ record->time.tv_sec = get_seconds();
+ record->time.tv_nsec = 0;
+
+ record->id = generic_id(record->time.tv_sec, record->part,
+ record->count);
+
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu-%c",
record->type, record->part, record->count,
- get_seconds(), record->compressed ? 'C' : 'D');
+ record->time.tv_sec, record->compressed ? 'C' : 'D');
for (i = 0; i < DUMP_NAME_LEN; i++)
efi_name[i] = name[i];
if (record->reason == KMSG_DUMP_OOPS)
efivar_run_worker();
- record->id = record->part;
return ret;
};
* holding multiple logs, remains.
*/
snprintf(name_old, sizeof(name_old), "dump-type%u-%u-%lu",
- ed->record->type, (unsigned int)ed->record->id,
+ ed->record->type, ed->record->part,
ed->record->time.tv_sec);
for (i = 0; i < DUMP_NAME_LEN; i++)
char name[DUMP_NAME_LEN];
efi_char16_t efi_name[DUMP_NAME_LEN];
int found, i;
- unsigned int part;
- do_div(record->id, 1000);
- part = do_div(record->id, 100);
snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lu",
record->type, record->part, record->count,
record->time.tv_sec);
return VPD_OK;
info = kzalloc(sizeof(*info), GFP_KERNEL);
- info->key = kzalloc(key_len + 1, GFP_KERNEL);
- if (!info->key)
+ if (!info)
return -ENOMEM;
+ info->key = kzalloc(key_len + 1, GFP_KERNEL);
+ if (!info->key) {
+ ret = -ENOMEM;
+ goto free_info;
+ }
memcpy(info->key, key, key_len);
list_add_tail(&info->list, &sec->attribs);
ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr);
- if (ret) {
- kfree(info->key);
- return ret;
- }
+ if (ret)
+ goto free_info_key;
return 0;
+
+free_info_key:
+ kfree(info->key);
+free_info:
+ kfree(info);
+
+ return ret;
}
static void vpd_section_attrib_destroy(struct vpd_section *sec)
info->debug_buffer[info->debug_region_size] = 0;
info->d = debugfs_create_file(strncat(debug_name, dev_name(dev),
- sizeof(debug_name)),
+ sizeof(debug_name) -
+ sizeof("ti_sci_debug@")),
0444, NULL, info, &ti_sci_debug_fops);
if (IS_ERR(info->d))
return PTR_ERR(info->d);
*/
#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
static int hdlcd_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
- u32 src_w, src_h;
+ struct drm_rect clip = { 0 };
+ struct drm_crtc_state *crtc_state;
+ u32 src_h = state->src_h >> 16;
- src_w = state->src_w >> 16;
- src_h = state->src_h >> 16;
+ /* only the HDLCD_REG_FB_LINE_COUNT register has a limit */
+ if (src_h >= HDLCD_MAX_YRES) {
+ DRM_DEBUG_KMS("Invalid source width: %d\n", src_h);
+ return -EINVAL;
+ }
+
+ if (!state->fb || !state->crtc)
+ return 0;
- /* we can't do any scaling of the plane source */
- if ((src_w != state->crtc_w) || (src_h != state->crtc_h))
+ crtc_state = drm_atomic_get_existing_crtc_state(state->state,
+ state->crtc);
+ if (!crtc_state) {
+ DRM_DEBUG_KMS("Invalid crtc state\n");
return -EINVAL;
+ }
- return 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+ return drm_plane_helper_check_state(state, &clip,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, true);
}
static void hdlcd_plane_atomic_update(struct drm_plane *plane,
struct drm_framebuffer *fb = plane->state->fb;
struct hdlcd_drm_private *hdlcd;
struct drm_gem_cma_object *gem;
- u32 src_w, src_h, dest_w, dest_h;
+ u32 src_x, src_y, dest_h;
dma_addr_t scanout_start;
if (!fb)
return;
- src_w = plane->state->src_w >> 16;
- src_h = plane->state->src_h >> 16;
- dest_w = plane->state->crtc_w;
- dest_h = plane->state->crtc_h;
+ src_x = plane->state->src.x1 >> 16;
+ src_y = plane->state->src.y1 >> 16;
+ dest_h = drm_rect_height(&plane->state->dst);
gem = drm_fb_cma_get_gem_obj(fb, 0);
+
scanout_start = gem->paddr + fb->offsets[0] +
- plane->state->crtc_y * fb->pitches[0] +
- plane->state->crtc_x *
- fb->format->cpp[0];
+ src_y * fb->pitches[0] +
+ src_x * fb->format->cpp[0];
hdlcd = plane->dev->dev_private;
hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_LENGTH, fb->pitches[0]);
formats, ARRAY_SIZE(formats),
DRM_PLANE_TYPE_PRIMARY, NULL);
if (ret) {
- devm_kfree(drm->dev, plane);
return ERR_PTR(ret);
}
&hdlcd_crtc_funcs, NULL);
if (ret) {
hdlcd_plane_destroy(primary);
- devm_kfree(drm->dev, primary);
return ret;
}
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
-static int atmel_hlcdc_attach_endpoint(struct drm_device *dev,
- const struct device_node *np)
+static int atmel_hlcdc_attach_endpoint(struct drm_device *dev, int endpoint)
{
struct atmel_hlcdc_dc *dc = dev->dev_private;
struct atmel_hlcdc_rgb_output *output;
struct drm_bridge *bridge;
int ret;
+ ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 0, endpoint,
+ &panel, &bridge);
+ if (ret)
+ return ret;
+
output = devm_kzalloc(dev->dev, sizeof(*output), GFP_KERNEL);
if (!output)
return -EINVAL;
output->encoder.possible_crtcs = 0x1;
- ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge);
- if (ret)
- return ret;
-
if (panel) {
output->connector.dpms = DRM_MODE_DPMS_OFF;
output->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
int atmel_hlcdc_create_outputs(struct drm_device *dev)
{
- struct device_node *remote;
- int ret = -ENODEV;
- int endpoint = 0;
-
- while (true) {
- /* Loop thru possible multiple connections to the output */
- remote = of_graph_get_remote_node(dev->dev->of_node, 0,
- endpoint++);
- if (!remote)
- break;
-
- ret = atmel_hlcdc_attach_endpoint(dev, remote);
- of_node_put(remote);
- if (ret)
- return ret;
- }
+ int endpoint, ret = 0;
+
+ for (endpoint = 0; !ret; endpoint++)
+ ret = atmel_hlcdc_attach_endpoint(dev, endpoint);
+
+ /* At least one device was successfully attached.*/
+ if (ret == -ENODEV && endpoint)
+ return 0;
return ret;
}
/* initially, until copy_from_user() and bo lookup succeeds: */
submit->nr_bos = 0;
+ submit->fence = NULL;
ww_acquire_init(&submit->ticket, &reservation_ww_class);
}
}
ww_acquire_fini(&submit->ticket);
- dma_fence_put(submit->fence);
+ if (submit->fence)
+ dma_fence_put(submit->fence);
kfree(submit);
}
mode = vgpu_vreg(vgpu, offset);
if (GFX_MODE_BIT_SET_IN_MASK(mode, START_DMA)) {
- WARN_ONCE(1, "VM(%d): iGVT-g doesn't supporte GuC\n",
+ WARN_ONCE(1, "VM(%d): iGVT-g doesn't support GuC\n",
vgpu->id);
return 0;
}
} else
v = mmio->value;
+ if (mmio->in_context)
+ continue;
+
I915_WRITE(mmio->reg, v);
POSTING_READ(mmio->reg);
struct vgpu_sched_data *vgpu_data;
ktime_t cur_time;
- /* no target to schedule */
- if (!scheduler->next_vgpu)
+ /* no need to schedule if next_vgpu is the same with current_vgpu,
+ * let scheduler chose next_vgpu again by setting it to NULL.
+ */
+ if (scheduler->next_vgpu == scheduler->current_vgpu) {
+ scheduler->next_vgpu = NULL;
return;
+ }
/*
* after the flag is set, workload dispatch thread will
u32 pte_flags;
int ret;
- ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, vma->size);
- if (ret)
- return ret;
+ if (!(vma->flags & I915_VMA_LOCAL_BIND)) {
+ ret = vma->vm->allocate_va_range(vma->vm, vma->node.start,
+ vma->size);
+ if (ret)
+ return ret;
+ }
vma->pages = vma->obj->mm.pages;
if (flags & I915_VMA_LOCAL_BIND) {
struct i915_hw_ppgtt *appgtt = i915->mm.aliasing_ppgtt;
- if (appgtt->base.allocate_va_range) {
+ if (!(vma->flags & I915_VMA_LOCAL_BIND) &&
+ appgtt->base.allocate_va_range) {
ret = appgtt->base.allocate_va_range(&appgtt->base,
vma->node.start,
vma->node.size);
#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */
#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */
#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */
+#define CLKCFG_FSB_1067_ALT (0 << 0) /* hrawclk 266 */
#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */
-/* Note, below two are guess */
-#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */
+/*
+ * Note that on at least on ELK the below value is reported for both
+ * 333 and 400 MHz BIOS FSB setting, but given that the gmch datasheet
+ * lists only 200/266/333 MHz FSB as supported let's decode it as 333 MHz.
+ */
+#define CLKCFG_FSB_1333_ALT (4 << 0) /* hrawclk 333 */
#define CLKCFG_FSB_MASK (7 << 0)
#define CLKCFG_MEM_533 (1 << 4)
#define CLKCFG_MEM_667 (2 << 4)
case CLKCFG_FSB_800:
return 200000;
case CLKCFG_FSB_1067:
+ case CLKCFG_FSB_1067_ALT:
return 266667;
case CLKCFG_FSB_1333:
+ case CLKCFG_FSB_1333_ALT:
return 333333;
- /* these two are just a guess; one of them might be right */
- case CLKCFG_FSB_1600:
- case CLKCFG_FSB_1600_ALT:
- return 400000;
default:
return 133333;
}
val |= (ULPS_STATE_ENTER | DEVICE_READY);
I915_WRITE(MIPI_DEVICE_READY(port), val);
- /* Wait for ULPS Not active */
+ /* Wait for ULPS active */
if (intel_wait_for_register(dev_priv,
- MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
- GLK_ULPS_NOT_ACTIVE, 20))
- DRM_ERROR("ULPS is still active\n");
+ MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20))
+ DRM_ERROR("ULPS not active\n");
/* Exit ULPS */
val = I915_READ(MIPI_DEVICE_READY(port));
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include "i915_drv.h"
#include <linux/delay.h>
kfree(rsc);
+ pm_runtime_forbid(&platdev->dev);
+ pm_runtime_set_active(&platdev->dev);
+ pm_runtime_enable(&platdev->dev);
+
return platdev;
err:
pm_runtime_get_sync(drm->dev->dev);
drm_helper_hpd_irq_event(drm->dev);
+ /* enable polling for external displays */
+ drm_kms_helper_poll_enable(drm->dev);
pm_runtime_mark_last_busy(drm->dev->dev);
pm_runtime_put_sync(drm->dev->dev);
if (ret)
return ret;
- /* enable polling for external displays */
- if (!dev->mode_config.poll_enabled)
- drm_kms_helper_poll_enable(dev);
-
/* enable hotplug interrupts */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct nouveau_connector *conn = nouveau_connector(connector);
pm_runtime_allow(dev->dev);
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put(dev->dev);
+ } else {
+ /* enable polling for external displays */
+ drm_kms_helper_poll_enable(dev);
}
return 0;
ret = nouveau_do_resume(drm_dev, true);
- if (!drm_dev->mode_config.poll_enabled)
- drm_kms_helper_poll_enable(drm_dev);
-
/* do magic */
nvif_mask(&device->object, 0x088488, (1 << 25), (1 << 25));
vga_switcheroo_set_dynamic_switch(pdev, VGA_SWITCHEROO_ON);
case NVKM_MEM_TARGET_NCOH: target = 3; break;
default:
WARN_ON(1);
- return;
+ goto unlock;
}
nvkm_wr32(device, 0x002270, (nvkm_memory_addr(mem) >> 12) |
& 0x00100000),
msecs_to_jiffies(2000)) == 0)
nvkm_error(subdev, "runlist %d update timeout\n", runl);
+unlock:
mutex_unlock(&subdev->mutex);
}
ret = nvkm_firmware_get(subdev->device, f, &sig);
if (ret)
goto free_data;
+
img->sig = kmemdup(sig->data, sig->size, GFP_KERNEL);
if (!img->sig) {
ret = -ENOMEM;
img->ucode_data = ls_ucode_img_build(bl, code, data,
&img->ucode_desc);
if (IS_ERR(img->ucode_data)) {
+ kfree(img->sig);
ret = PTR_ERR(img->ucode_data);
- goto free_data;
+ goto free_sig;
}
img->ucode_size = img->ucode_desc.image_size;
config TEGRA_HOST1X
tristate "NVIDIA Tegra host1x driver"
depends on ARCH_TEGRA || (ARM && COMPILE_TEST)
+ select IOMMU_IOVA if IOMMU_SUPPORT
help
Driver for the NVIDIA Tegra host1x hardware.
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct platform_data *pdata;
+ /*
+ * Don't execute this on resume as the offline callback did
+ * not get executed on suspend.
+ */
+ if (cpuhp_tasks_frozen)
+ return 0;
+
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
* sensors. We check this bit only, all the early CPUs
struct temp_data *tdata;
int indx, target;
+ /*
+ * Don't execute this on suspend as the device remove locks
+ * up the machine.
+ */
+ if (cpuhp_tasks_frozen)
+ return 0;
+
/* If the physical CPU device does not exist, just return */
if (!pdev)
return 0;
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
const struct acpi_device_id *id;
struct acpi_device *adev;
* Try to get SDA hold time and *CNT values from an ACPI method for
* selected speed modes.
*/
+ dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, &ss_ht);
+ dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, &fp_ht);
+ dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
+ dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
+
switch (dev->clk_freq) {
case 100000:
- dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt,
- &dev->sda_hold_time);
+ dev->sda_hold_time = ss_ht;
break;
case 1000000:
- dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt,
- &dev->sda_hold_time);
+ dev->sda_hold_time = fp_ht;
break;
case 3400000:
- dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt,
- &dev->sda_hold_time);
+ dev->sda_hold_time = hs_ht;
break;
case 400000:
default:
- dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
- &dev->sda_hold_time);
+ dev->sda_hold_time = fs_ht;
break;
}
rc = -EINVAL;
goto out;
}
- drv_data->irq = irq_of_parse_and_map(np, 0);
drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
if (IS_ERR(drv_data->rstc)) {
if (!IS_ERR(drv_data->clk))
clk_prepare_enable(drv_data->clk);
+ drv_data->irq = platform_get_irq(pd, 0);
+
if (pdata) {
drv_data->freq_m = pdata->freq_m;
drv_data->freq_n = pdata->freq_n;
- drv_data->irq = platform_get_irq(pd, 0);
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
drv_data->offload_enabled = false;
memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
goto exit_clk;
}
if (drv_data->irq < 0) {
- rc = -ENXIO;
+ rc = drv_data->irq;
goto exit_reset;
}
adapter->class = I2C_CLASS_HWMON;
adapter->dev.parent = &pdev->dev;
adapter->dev.of_node = pdev->dev.of_node;
+ ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev));
i2c_set_adapdata(adapter, ctx);
rc = i2c_add_adapter(adapter);
if (rc) {
if (force_nr) {
priv->adap.nr = force_nr;
ret = i2c_add_numbered_adapter(&priv->adap);
- dev_err(&parent->dev,
- "failed to add mux-adapter %u as bus %u (error=%d)\n",
- chan_id, force_nr, ret);
+ if (ret < 0) {
+ dev_err(&parent->dev,
+ "failed to add mux-adapter %u as bus %u (error=%d)\n",
+ chan_id, force_nr, ret);
+ goto err_free_priv;
+ }
} else {
ret = i2c_add_adapter(&priv->adap);
- dev_err(&parent->dev,
- "failed to add mux-adapter %u (error=%d)\n",
- chan_id, ret);
- }
- if (ret < 0) {
- kfree(priv);
- return ret;
+ if (ret < 0) {
+ dev_err(&parent->dev,
+ "failed to add mux-adapter %u (error=%d)\n",
+ chan_id, ret);
+ goto err_free_priv;
+ }
}
WARN(sysfs_create_link(&priv->adap.dev.kobj, &muxc->dev->kobj,
muxc->adapter[muxc->num_adapters++] = &priv->adap;
return 0;
+
+err_free_priv:
+ kfree(priv);
+ return ret;
}
EXPORT_SYMBOL_GPL(i2c_mux_add_adapter);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mux->data.reg_size = resource_size(res);
mux->data.reg = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mux->data.reg))
- return PTR_ERR(mux->data.reg);
+ if (IS_ERR(mux->data.reg)) {
+ ret = PTR_ERR(mux->data.reg);
+ goto err_put_parent;
+ }
}
if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
mux->data.reg_size != 1) {
dev_err(&pdev->dev, "Invalid register size\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_put_parent;
}
muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
i2c_mux_reg_select, NULL);
- if (!muxc)
- return -ENOMEM;
+ if (!muxc) {
+ ret = -ENOMEM;
+ goto err_put_parent;
+ }
muxc->priv = mux;
platform_set_drvdata(pdev, muxc);
ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
if (ret)
- goto add_adapter_failed;
+ goto err_del_mux_adapters;
}
dev_dbg(&pdev->dev, "%d port mux on %s adapter\n",
return 0;
-add_adapter_failed:
+err_del_mux_adapters:
i2c_mux_del_adapters(muxc);
+err_put_parent:
+ i2c_put_adapter(parent);
return ret;
}
dma_addr_t iova, size_t size)
{
struct iova_domain *iovad = &cookie->iovad;
- unsigned long shift = iova_shift(iovad);
/* The MSI case is only ever cleaning up its most recent allocation */
if (cookie->type == IOMMU_DMA_MSI_COOKIE)
cookie->msi_iova -= size;
else
- free_iova_fast(iovad, iova >> shift, size >> shift);
+ free_iova_fast(iovad, iova_pfn(iovad, iova),
+ size >> iova_shift(iovad));
}
static void __iommu_dma_unmap(struct iommu_domain *domain, dma_addr_t dma_addr,
{
struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
struct iommu_dma_cookie *cookie = domain->iova_cookie;
- struct iova_domain *iovad = &cookie->iovad;
- size_t iova_off = iova_offset(iovad, phys);
+ size_t iova_off = 0;
dma_addr_t iova;
- size = iova_align(iovad, size + iova_off);
+ if (cookie->type == IOMMU_DMA_IOVA_COOKIE) {
+ iova_off = iova_offset(&cookie->iovad, phys);
+ size = iova_align(&cookie->iovad, size + iova_off);
+ }
+
iova = iommu_dma_alloc_iova(domain, size, dma_get_mask(dev), dev);
if (!iova)
return DMA_ERROR_CODE;
if (context_copied(context)) {
u16 did_old = context_domain_id(context);
- if (did_old >= 0 && did_old < cap_ndoms(iommu->cap))
+ if (did_old >= 0 && did_old < cap_ndoms(iommu->cap)) {
iommu->flush.flush_context(iommu, did_old,
(((u16)bus) << 8) | devfn,
DMA_CCMD_MASK_NOBIT,
DMA_CCMD_DEVICE_INVL);
+ iommu->flush.flush_iotlb(iommu, did_old, 0, 0,
+ DMA_TLB_DSI_FLUSH);
+ }
}
pgd = domain->pgd;
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/device.h>
+#include <linux/dma-mapping.h>
#include <linux/dma-iommu.h>
#include <linux/err.h>
#include <linux/interrupt.h>
static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq,
u32 *mask, u32 *addr)
{
- unsigned int ofst;
-
- hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
- ofst = hwirq / 32 * 4;
+ unsigned int ofst = (hwirq / 32) * 4;
*mask = 1 << (hwirq % 32);
*addr = ofst + REG_MBIGEN_CLEAR_OFFSET;
mgn_chip->pdev = pdev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mgn_chip->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mgn_chip->base))
- return PTR_ERR(mgn_chip->base);
+ if (!res)
+ return -EINVAL;
+
+ mgn_chip->base = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!mgn_chip->base) {
+ dev_err(&pdev->dev, "failed to ioremap %pR\n", res);
+ return -ENOMEM;
+ }
if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
err = mbigen_of_create_domain(pdev, mgn_chip);
* Buffers are freed after this timeout
*/
static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS;
-static unsigned dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES;
+static unsigned long dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES;
static unsigned long dm_bufio_peak_allocated;
static unsigned long dm_bufio_allocated_kmem_cache;
return true;
}
-static unsigned get_retain_buffers(struct dm_bufio_client *c)
+static unsigned long get_retain_buffers(struct dm_bufio_client *c)
{
- unsigned retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes);
- return retain_bytes / c->block_size;
+ unsigned long retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes);
+ return retain_bytes >> (c->sectors_per_block_bits + SECTOR_SHIFT);
}
static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
struct dm_buffer *b, *tmp;
unsigned long freed = 0;
unsigned long count = nr_to_scan;
- unsigned retain_target = get_retain_buffers(c);
+ unsigned long retain_target = get_retain_buffers(c);
for (l = 0; l < LIST_SIZE; l++) {
list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list) {
static void __evict_old_buffers(struct dm_bufio_client *c, unsigned long age_hz)
{
struct dm_buffer *b, *tmp;
- unsigned retain_target = get_retain_buffers(c);
- unsigned count;
+ unsigned long retain_target = get_retain_buffers(c);
+ unsigned long count;
LIST_HEAD(write_list);
dm_bufio_lock(c);
module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds");
-module_param_named(retain_bytes, dm_bufio_retain_bytes, uint, S_IRUGO | S_IWUSR);
+module_param_named(retain_bytes, dm_bufio_retain_bytes, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(retain_bytes, "Try to keep at least this many bytes cached in memory");
module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR);
{
struct background_tracker *b = kmalloc(sizeof(*b), GFP_KERNEL);
+ if (!b) {
+ DMERR("couldn't create background_tracker");
+ return NULL;
+ }
+
b->max_work = max_work;
atomic_set(&b->pending_promotes, 0);
atomic_set(&b->pending_writebacks, 0);
* Cache entries may not be populated. So we cannot rely on the
* size of the clean queue.
*/
- unsigned nr_clean;
-
if (idle) {
/*
* We'd like to clean everything.
return q_size(&mq->dirty) == 0u;
}
- nr_clean = from_cblock(mq->cache_size) - q_size(&mq->dirty);
- return (nr_clean + btracker_nr_writebacks_queued(mq->bg_work)) >=
- percent_to_target(mq, CLEAN_TARGET);
+ /*
+ * If we're busy we don't worry about cleaning at all.
+ */
+ return true;
}
-static bool free_target_met(struct smq_policy *mq, bool idle)
+static bool free_target_met(struct smq_policy *mq)
{
unsigned nr_free;
- if (!idle)
- return true;
-
nr_free = from_cblock(mq->cache_size) - mq->cache_alloc.nr_allocated;
return (nr_free + btracker_nr_demotions_queued(mq->bg_work)) >=
percent_to_target(mq, FREE_TARGET);
if (unlikely(WARN_ON_ONCE(!mq->migrations_allowed)))
return;
- e = q_peek(&mq->clean, mq->clean.nr_levels, true);
+ e = q_peek(&mq->clean, mq->clean.nr_levels / 2, true);
if (!e) {
- if (!clean_target_met(mq, false))
+ if (!clean_target_met(mq, true))
queue_writeback(mq);
return;
}
* We always claim to be 'idle' to ensure some demotions happen
* with continuous loads.
*/
- if (!free_target_met(mq, true))
+ if (!free_target_met(mq))
queue_demotion(mq);
return;
}
spin_lock_irqsave(&mq->lock, flags);
r = btracker_issue(mq->bg_work, result);
if (r == -ENODATA) {
- /* find some writeback work to do */
- if (mq->migrations_allowed && !free_target_met(mq, idle))
- queue_demotion(mq);
-
- else if (!clean_target_met(mq, idle))
+ if (!clean_target_met(mq, idle)) {
queue_writeback(mq);
-
- r = btracker_issue(mq->bg_work, result);
+ r = btracker_issue(mq->bg_work, result);
+ }
}
spin_unlock_irqrestore(&mq->lock, flags);
clear_pending(mq, e);
if (success) {
e->oblock = work->oblock;
+ e->level = NR_CACHE_LEVELS - 1;
push(mq, e);
// h, q, a
} else {
static void __iot_io_end(struct io_tracker *iot, sector_t len)
{
+ if (!len)
+ return;
+
iot->in_flight -= len;
if (!iot->in_flight)
iot->idle_time = jiffies;
spinlock_t invalidation_lock;
struct list_head invalidation_requests;
- struct io_tracker origin_tracker;
+ struct io_tracker tracker;
struct work_struct commit_ws;
struct batcher committer;
static bool accountable_bio(struct cache *cache, struct bio *bio)
{
- return ((bio->bi_bdev == cache->origin_dev->bdev) &&
- bio_op(bio) != REQ_OP_DISCARD);
+ return bio_op(bio) != REQ_OP_DISCARD;
}
static void accounted_begin(struct cache *cache, struct bio *bio)
if (accountable_bio(cache, bio)) {
pb->len = bio_sectors(bio);
- iot_io_begin(&cache->origin_tracker, pb->len);
+ iot_io_begin(&cache->tracker, pb->len);
}
}
size_t pb_data_size = get_per_bio_data_size(cache);
struct per_bio_data *pb = get_per_bio_data(bio, pb_data_size);
- iot_io_end(&cache->origin_tracker, pb->len);
+ iot_io_end(&cache->tracker, pb->len);
}
static void accounted_request(struct cache *cache, struct bio *bio)
enum busy {
IDLE,
- MODERATE,
BUSY
};
static enum busy spare_migration_bandwidth(struct cache *cache)
{
- bool idle = iot_idle_for(&cache->origin_tracker, HZ);
+ bool idle = iot_idle_for(&cache->tracker, HZ);
sector_t current_volume = (atomic_read(&cache->nr_io_migrations) + 1) *
cache->sectors_per_block;
- if (current_volume <= cache->migration_threshold)
- return idle ? IDLE : MODERATE;
+ if (idle && current_volume <= cache->migration_threshold)
+ return IDLE;
else
- return idle ? MODERATE : BUSY;
+ return BUSY;
}
static void inc_hit_counter(struct cache *cache, struct bio *bio)
for (;;) {
b = spare_migration_bandwidth(cache);
- if (b == BUSY)
- break;
r = policy_get_background_work(cache->policy, b == IDLE, &op);
if (r == -ENODATA)
batcher_init(&cache->committer, commit_op, cache,
issue_op, cache, cache->wq);
- iot_init(&cache->origin_tracker);
+ iot_init(&cache->tracker);
init_rwsem(&cache->background_work_lock);
prevent_background_work(cache);
cancel_delayed_work(&cache->waker);
flush_workqueue(cache->wq);
- WARN_ON(cache->origin_tracker.in_flight);
+ WARN_ON(cache->tracker.in_flight);
/*
* If it's a flush suspend there won't be any deferred bios, so this
* it has been invoked.
*/
#define dm_report_EIO(m) \
-({ \
+do { \
struct mapped_device *md = dm_table_get_md((m)->ti->table); \
\
pr_debug("%s: returning EIO; QIFNP = %d; SQIFNP = %d; DNFS = %d\n", \
test_bit(MPATHF_QUEUE_IF_NO_PATH, &(m)->flags), \
test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &(m)->flags), \
dm_noflush_suspending((m)->ti)); \
- -EIO; \
-})
+} while (0)
/*
* Map cloned requests (request-based multipath)
if (!pgpath) {
if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
return DM_MAPIO_DELAY_REQUEUE;
- return dm_report_EIO(m); /* Failed */
+ dm_report_EIO(m); /* Failed */
+ return DM_MAPIO_KILL;
} else if (test_bit(MPATHF_QUEUE_IO, &m->flags) ||
test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) {
if (pg_init_all_paths(m))
if (!pgpath) {
if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
return DM_MAPIO_REQUEUE;
- return dm_report_EIO(m);
+ dm_report_EIO(m);
+ return -EIO;
}
mpio->pgpath = pgpath;
if (atomic_read(&m->nr_valid_paths) == 0 &&
!test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
if (error == -EIO)
- error = dm_report_EIO(m);
+ dm_report_EIO(m);
/* complete with the original error */
r = DM_ENDIO_DONE;
}
fail_path(mpio->pgpath);
if (atomic_read(&m->nr_valid_paths) == 0 &&
- !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
- return dm_report_EIO(m);
+ !test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
+ dm_report_EIO(m);
+ return -EIO;
+ }
/* Queue for the daemon to resubmit */
dm_bio_restore(get_bio_details_from_bio(clone), clone);
case DM_MAPIO_KILL:
/* The target wants to complete the I/O */
dm_kill_unmapped_request(rq, -EIO);
+ break;
default:
DMWARN("unimplemented target map return value: %d", r);
BUG();
if (r < 0)
return r;
- r = save_sm_roots(pmd);
+ r = dm_tm_pre_commit(pmd->tm);
if (r < 0)
return r;
- r = dm_tm_pre_commit(pmd->tm);
+ r = save_sm_roots(pmd);
if (r < 0)
return r;
* may proceed without blocking. It is important to call this before
* attempting a GFP_KERNEL allocation while holding the mddev lock.
* Must be called with mddev_lock held.
- *
- * In the ->external case MD_SB_CHANGE_PENDING can not be cleared until mddev->lock
- * is dropped, so return -EAGAIN after notifying userspace.
*/
-int md_allow_write(struct mddev *mddev)
+void md_allow_write(struct mddev *mddev)
{
if (!mddev->pers)
- return 0;
+ return;
if (mddev->ro)
- return 0;
+ return;
if (!mddev->pers->sync_request)
- return 0;
+ return;
spin_lock(&mddev->lock);
if (mddev->in_sync) {
spin_unlock(&mddev->lock);
md_update_sb(mddev, 0);
sysfs_notify_dirent_safe(mddev->sysfs_state);
+ /* wait for the dirty state to be recorded in the metadata */
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_SB_CHANGE_CLEAN, &mddev->sb_flags) &&
+ !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
} else
spin_unlock(&mddev->lock);
-
- if (test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
- return -EAGAIN;
- else
- return 0;
}
EXPORT_SYMBOL_GPL(md_allow_write);
bool metadata_op);
extern void md_do_sync(struct md_thread *thread);
extern void md_new_event(struct mddev *mddev);
-extern int md_allow_write(struct mddev *mddev);
+extern void md_allow_write(struct mddev *mddev);
extern void md_wait_for_blocked_rdev(struct md_rdev *rdev, struct mddev *mddev);
extern void md_set_array_sectors(struct mddev *mddev, sector_t array_sectors);
extern int md_check_no_bitmap(struct mddev *mddev);
static int sm_disk_dec_block(struct dm_space_map *sm, dm_block_t b)
{
+ int r;
+ uint32_t old_count;
enum allocation_event ev;
struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
- return sm_ll_dec(&smd->ll, b, &ev);
+ r = sm_ll_dec(&smd->ll, b, &ev);
+ if (!r && (ev == SM_FREE)) {
+ /*
+ * It's only free if it's also free in the last
+ * transaction.
+ */
+ r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+ if (!r && !old_count)
+ smd->nr_allocated_this_transaction--;
+ }
+
+ return r;
}
static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
- blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors);
+ blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
blk_queue_io_opt(mddev->queue,
}
}
+static void raid0_handle_discard(struct mddev *mddev, struct bio *bio)
+{
+ struct r0conf *conf = mddev->private;
+ struct strip_zone *zone;
+ sector_t start = bio->bi_iter.bi_sector;
+ sector_t end;
+ unsigned int stripe_size;
+ sector_t first_stripe_index, last_stripe_index;
+ sector_t start_disk_offset;
+ unsigned int start_disk_index;
+ sector_t end_disk_offset;
+ unsigned int end_disk_index;
+ unsigned int disk;
+
+ zone = find_zone(conf, &start);
+
+ if (bio_end_sector(bio) > zone->zone_end) {
+ struct bio *split = bio_split(bio,
+ zone->zone_end - bio->bi_iter.bi_sector, GFP_NOIO,
+ mddev->bio_set);
+ bio_chain(split, bio);
+ generic_make_request(bio);
+ bio = split;
+ end = zone->zone_end;
+ } else
+ end = bio_end_sector(bio);
+
+ if (zone != conf->strip_zone)
+ end = end - zone[-1].zone_end;
+
+ /* Now start and end is the offset in zone */
+ stripe_size = zone->nb_dev * mddev->chunk_sectors;
+
+ first_stripe_index = start;
+ sector_div(first_stripe_index, stripe_size);
+ last_stripe_index = end;
+ sector_div(last_stripe_index, stripe_size);
+
+ start_disk_index = (int)(start - first_stripe_index * stripe_size) /
+ mddev->chunk_sectors;
+ start_disk_offset = ((int)(start - first_stripe_index * stripe_size) %
+ mddev->chunk_sectors) +
+ first_stripe_index * mddev->chunk_sectors;
+ end_disk_index = (int)(end - last_stripe_index * stripe_size) /
+ mddev->chunk_sectors;
+ end_disk_offset = ((int)(end - last_stripe_index * stripe_size) %
+ mddev->chunk_sectors) +
+ last_stripe_index * mddev->chunk_sectors;
+
+ for (disk = 0; disk < zone->nb_dev; disk++) {
+ sector_t dev_start, dev_end;
+ struct bio *discard_bio = NULL;
+ struct md_rdev *rdev;
+
+ if (disk < start_disk_index)
+ dev_start = (first_stripe_index + 1) *
+ mddev->chunk_sectors;
+ else if (disk > start_disk_index)
+ dev_start = first_stripe_index * mddev->chunk_sectors;
+ else
+ dev_start = start_disk_offset;
+
+ if (disk < end_disk_index)
+ dev_end = (last_stripe_index + 1) * mddev->chunk_sectors;
+ else if (disk > end_disk_index)
+ dev_end = last_stripe_index * mddev->chunk_sectors;
+ else
+ dev_end = end_disk_offset;
+
+ if (dev_end <= dev_start)
+ continue;
+
+ rdev = conf->devlist[(zone - conf->strip_zone) *
+ conf->strip_zone[0].nb_dev + disk];
+ if (__blkdev_issue_discard(rdev->bdev,
+ dev_start + zone->dev_start + rdev->data_offset,
+ dev_end - dev_start, GFP_NOIO, 0, &discard_bio) ||
+ !discard_bio)
+ continue;
+ bio_chain(discard_bio, bio);
+ if (mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(rdev->bdev),
+ discard_bio, disk_devt(mddev->gendisk),
+ bio->bi_iter.bi_sector);
+ generic_make_request(discard_bio);
+ }
+ bio_endio(bio);
+}
+
static void raid0_make_request(struct mddev *mddev, struct bio *bio)
{
struct strip_zone *zone;
return;
}
+ if (unlikely((bio_op(bio) == REQ_OP_DISCARD))) {
+ raid0_handle_discard(mddev, bio);
+ return;
+ }
+
bio_sector = bio->bi_iter.bi_sector;
sector = bio_sector;
chunk_sects = mddev->chunk_sectors;
bio->bi_iter.bi_sector = sector + zone->dev_start +
tmp_dev->data_offset;
- if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
- !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
- /* Just ignore it */
- bio_endio(bio);
- } else {
- if (mddev->gendisk)
- trace_block_bio_remap(bdev_get_queue(bio->bi_bdev),
- bio, disk_devt(mddev->gendisk),
- bio_sector);
- mddev_check_writesame(mddev, bio);
- mddev_check_write_zeroes(mddev, bio);
- generic_make_request(bio);
- }
+ if (mddev->gendisk)
+ trace_block_bio_remap(bdev_get_queue(bio->bi_bdev),
+ bio, disk_devt(mddev->gendisk),
+ bio_sector);
+ mddev_check_writesame(mddev, bio);
+ mddev_check_write_zeroes(mddev, bio);
+ generic_make_request(bio);
}
static void raid0_status(struct seq_file *seq, struct mddev *mddev)
break;
}
continue;
- } else
+ } else {
+ if ((sectors > best_good_sectors) && (best_disk >= 0))
+ best_disk = -1;
best_good_sectors = sectors;
+ }
if (best_disk >= 0)
/* At least two disks to choose from so failfast is OK */
plug = container_of(cb, struct raid1_plug_cb, cb);
else
plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
if (plug) {
bio_list_add(&plug->pending, mbio);
plug->pending_cnt++;
} else {
+ spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
- }
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
+ spin_unlock_irqrestore(&conf->device_lock, flags);
md_wakeup_thread(mddev->thread);
+ }
}
r1_bio_write_done(r1_bio);
struct r1conf *conf = mddev->private;
int cnt, raid_disks;
unsigned long flags;
- int d, d2, err;
+ int d, d2;
/* Cannot change chunk_size, layout, or level */
if (mddev->chunk_sectors != mddev->new_chunk_sectors ||
return -EINVAL;
}
- if (!mddev_is_clustered(mddev)) {
- err = md_allow_write(mddev);
- if (err)
- return err;
- }
+ if (!mddev_is_clustered(mddev))
+ md_allow_write(mddev);
raid_disks = mddev->raid_disks + mddev->delta_disks;
plug = container_of(cb, struct raid10_plug_cb, cb);
else
plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
if (plug) {
bio_list_add(&plug->pending, mbio);
plug->pending_cnt++;
} else {
+ spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
- }
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
+ spin_unlock_irqrestore(&conf->device_lock, flags);
md_wakeup_thread(mddev->thread);
+ }
}
static void raid10_write_request(struct mddev *mddev, struct bio *bio,
#include "md.h"
#include "raid5.h"
#include "bitmap.h"
+#include "raid5-log.h"
/*
* metadata/data stored in disk with 4k size unit (a block) regardless
__r5l_set_io_unit_state(io, IO_UNIT_IO_START);
spin_unlock_irqrestore(&log->io_list_lock, flags);
+ /*
+ * In case of journal device failures, submit_bio will get error
+ * and calls endio, then active stripes will continue write
+ * process. Therefore, it is not necessary to check Faulty bit
+ * of journal device here.
+ *
+ * We can't check split_bio after current_bio is submitted. If
+ * io->split_bio is null, after current_bio is submitted, current_bio
+ * might already be completed and the io_unit is freed. We submit
+ * split_bio first to avoid the issue.
+ */
+ if (io->split_bio) {
+ if (io->has_flush)
+ io->split_bio->bi_opf |= REQ_PREFLUSH;
+ if (io->has_fua)
+ io->split_bio->bi_opf |= REQ_FUA;
+ submit_bio(io->split_bio);
+ }
+
if (io->has_flush)
io->current_bio->bi_opf |= REQ_PREFLUSH;
if (io->has_fua)
io->current_bio->bi_opf |= REQ_FUA;
submit_bio(io->current_bio);
-
- if (!io->split_bio)
- return;
-
- if (io->has_flush)
- io->split_bio->bi_opf |= REQ_PREFLUSH;
- if (io->has_fua)
- io->split_bio->bi_opf |= REQ_FUA;
- submit_bio(io->split_bio);
}
/* deferred io_unit will be dispatched here */
return;
pr_info("md/raid:%s: Disabling writeback cache for degraded array.\n",
mdname(mddev));
+
+ /* wait superblock change before suspend */
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags));
+
mddev_suspend(mddev);
log->r5c_journal_mode = R5C_JOURNAL_MODE_WRITE_THROUGH;
mddev_resume(mddev);
* When run in degraded mode, array is set to write-through mode.
* This check helps drain pending write safely in the transition to
* write-through mode.
+ *
+ * When a stripe is syncing, the write is also handled in write
+ * through mode.
*/
- if (s->failed) {
+ if (s->failed || test_bit(STRIPE_SYNCING, &sh->state)) {
r5c_make_stripe_write_out(sh);
return -EAGAIN;
}
}
r5l_append_flush_payload(log, sh->sector);
+ /* stripe is flused to raid disks, we can do resync now */
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
+ set_bit(STRIPE_HANDLE, &sh->state);
}
int r5c_cache_data(struct r5l_log *log, struct stripe_head *sh)
return ret;
}
-void r5c_update_on_rdev_error(struct mddev *mddev)
+void r5c_update_on_rdev_error(struct mddev *mddev, struct md_rdev *rdev)
{
struct r5conf *conf = mddev->private;
struct r5l_log *log = conf->log;
if (!log)
return;
- if (raid5_calc_degraded(conf) > 0 &&
+ if ((raid5_calc_degraded(conf) > 0 ||
+ test_bit(Journal, &rdev->flags)) &&
conf->log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_BACK)
schedule_work(&log->disable_writeback_work);
}
extern void r5c_check_stripe_cache_usage(struct r5conf *conf);
extern void r5c_check_cached_full_stripe(struct r5conf *conf);
extern struct md_sysfs_entry r5c_journal_mode;
-extern void r5c_update_on_rdev_error(struct mddev *mddev);
+extern void r5c_update_on_rdev_error(struct mddev *mddev,
+ struct md_rdev *rdev);
extern bool r5c_big_stripe_cached(struct r5conf *conf, sector_t sect);
extern struct dma_async_tx_descriptor *
static inline void lock_all_device_hash_locks_irq(struct r5conf *conf)
{
int i;
- local_irq_disable();
- spin_lock(conf->hash_locks);
+ spin_lock_irq(conf->hash_locks);
for (i = 1; i < NR_STRIPE_HASH_LOCKS; i++)
spin_lock_nest_lock(conf->hash_locks + i, conf->hash_locks);
spin_lock(&conf->device_lock);
{
int i;
spin_unlock(&conf->device_lock);
- for (i = NR_STRIPE_HASH_LOCKS; i; i--)
- spin_unlock(conf->hash_locks + i - 1);
- local_irq_enable();
+ for (i = NR_STRIPE_HASH_LOCKS - 1; i; i--)
+ spin_unlock(conf->hash_locks + i);
+ spin_unlock_irq(conf->hash_locks);
}
/* Find first data disk in a raid6 stripe */
if (test_bit(R5_InJournal, &sh->dev[i].flags))
injournal++;
/*
- * When quiesce in r5c write back, set STRIPE_HANDLE for stripes with
- * data in journal, so they are not released to cached lists
+ * In the following cases, the stripe cannot be released to cached
+ * lists. Therefore, we make the stripe write out and set
+ * STRIPE_HANDLE:
+ * 1. when quiesce in r5c write back;
+ * 2. when resync is requested fot the stripe.
*/
- if (conf->quiesce && r5c_is_writeback(conf->log) &&
- !test_bit(STRIPE_HANDLE, &sh->state) && injournal != 0) {
+ if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) ||
+ (conf->quiesce && r5c_is_writeback(conf->log) &&
+ !test_bit(STRIPE_HANDLE, &sh->state) && injournal != 0)) {
if (test_bit(STRIPE_R5C_CACHING, &sh->state))
r5c_make_stripe_write_out(sh);
set_bit(STRIPE_HANDLE, &sh->state);
static void lock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2)
{
- local_irq_disable();
if (sh1 > sh2) {
- spin_lock(&sh2->stripe_lock);
+ spin_lock_irq(&sh2->stripe_lock);
spin_lock_nested(&sh1->stripe_lock, 1);
} else {
- spin_lock(&sh1->stripe_lock);
+ spin_lock_irq(&sh1->stripe_lock);
spin_lock_nested(&sh2->stripe_lock, 1);
}
}
static void unlock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2)
{
spin_unlock(&sh1->stripe_lock);
- spin_unlock(&sh2->stripe_lock);
- local_irq_enable();
+ spin_unlock_irq(&sh2->stripe_lock);
}
/* Only freshly new full stripe normal write stripe can be added to a batch list */
struct stripe_head *osh, *nsh;
LIST_HEAD(newstripes);
struct disk_info *ndisks;
- int err;
+ int err = 0;
struct kmem_cache *sc;
int i;
int hash, cnt;
- err = md_allow_write(conf->mddev);
- if (err)
- return err;
+ md_allow_write(conf->mddev);
/* Step 1 */
sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
bdevname(rdev->bdev, b),
mdname(mddev),
conf->raid_disks - mddev->degraded);
- r5c_update_on_rdev_error(mddev);
+ r5c_update_on_rdev_error(mddev, rdev);
}
/*
* When LOG_CRITICAL, stripes with injournal == 0 will be sent to
* no_space_stripes list.
*
+ * 3. during journal failure
+ * In journal failure, we try to flush all cached data to raid disks
+ * based on data in stripe cache. The array is read-only to upper
+ * layers, so we would skip all pending writes.
+ *
*/
static inline bool delay_towrite(struct r5conf *conf,
struct r5dev *dev,
if (test_bit(R5C_LOG_CRITICAL, &conf->cache_state) &&
s->injournal > 0)
return true;
+ /* case 3 above */
+ if (s->log_failed && s->injournal)
+ return true;
return false;
}
if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) && !sh->batch_head) {
spin_lock(&sh->stripe_lock);
- /* Cannot process 'sync' concurrently with 'discard' */
- if (!test_bit(STRIPE_DISCARD, &sh->state) &&
+ /*
+ * Cannot process 'sync' concurrently with 'discard'.
+ * Flush data in r5cache before 'sync'.
+ */
+ if (!test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state) &&
+ !test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state) &&
+ !test_bit(STRIPE_DISCARD, &sh->state) &&
test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
set_bit(STRIPE_SYNCING, &sh->state);
clear_bit(STRIPE_INSYNC, &sh->state);
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
s.failed_num[0], s.failed_num[1]);
- /* check if the array has lost more than max_degraded devices and,
+ /*
+ * check if the array has lost more than max_degraded devices and,
* if so, some requests might need to be failed.
+ *
+ * When journal device failed (log_failed), we will only process
+ * the stripe if there is data need write to raid disks
*/
- if (s.failed > conf->max_degraded || s.log_failed) {
+ if (s.failed > conf->max_degraded ||
+ (s.log_failed && s.injournal == 0)) {
sh->check_state = 0;
sh->reconstruct_state = 0;
break_stripe_batch_list(sh, 0);
struct stripe_head *sh, *tmp;
struct list_head *handle_list = NULL;
struct r5worker_group *wg;
- bool second_try = !r5c_is_writeback(conf->log);
- bool try_loprio = test_bit(R5C_LOG_TIGHT, &conf->cache_state);
+ bool second_try = !r5c_is_writeback(conf->log) &&
+ !r5l_log_disk_error(conf);
+ bool try_loprio = test_bit(R5C_LOG_TIGHT, &conf->cache_state) ||
+ r5l_log_disk_error(conf);
again:
wg = NULL;
raid5_set_cache_size(struct mddev *mddev, int size)
{
struct r5conf *conf = mddev->private;
- int err;
if (size <= 16 || size > 32768)
return -EINVAL;
;
mutex_unlock(&conf->cache_size_mutex);
-
- err = md_allow_write(mddev);
- if (err)
- return err;
+ md_allow_write(mddev);
mutex_lock(&conf->cache_size_mutex);
while (size > conf->max_nr_stripes)
* neilb: there is no locking about new writes here,
* so this cannot be safe.
*/
- if (atomic_read(&conf->active_stripes)) {
+ if (atomic_read(&conf->active_stripes) ||
+ atomic_read(&conf->r5c_cached_full_stripes) ||
+ atomic_read(&conf->r5c_cached_partial_stripes)) {
return -EBUSY;
}
log_exit(conf);
pr_info("gpmc cs%i access configuration:\n", cs);
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
- GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13,
+ GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1,
GPMC_CONFIG1_DEVICESIZE_MAX, "device-width");
GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
config PCI_ENDPOINT_TEST
depends on PCI
+ select CRC32
tristate "PCI Endpoint Test driver"
---help---
Enable this configuration option to enable the host side test driver
return -1;
ad_info->aggregator_id = aggregator->aggregator_identifier;
- ad_info->ports = aggregator->num_of_ports;
+ ad_info->ports = __agg_active_ports(aggregator);
ad_info->actor_key = aggregator->actor_oper_aggregator_key;
ad_info->partner_key = aggregator->partner_oper_aggregator_key;
ether_addr_copy(ad_info->partner_system,
int arp_validate_value, fail_over_mac_value, primary_reselect_value, i;
struct bond_opt_value newval;
const struct bond_opt_value *valptr;
- int arp_all_targets_value;
+ int arp_all_targets_value = 0;
u16 ad_actor_sys_prio = 0;
u16 ad_user_port_key = 0;
- __be32 arp_target[BOND_MAX_ARP_TARGETS];
+ __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 };
int arp_ip_count;
int bond_mode = BOND_MODE_ROUNDROBIN;
int xmit_hashtype = BOND_XMIT_POLICY_LAYER2;
arp_validate_value = 0;
}
- arp_all_targets_value = 0;
if (arp_all_targets) {
bond_opt_initstr(&newval, arp_all_targets);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS),
mv88e6xxx_g1_stats_read(chip, reg, &low);
if (s->sizeof_stat == 8)
mv88e6xxx_g1_stats_read(chip, reg + 1, &high);
+ break;
+ default:
+ return UINT64_MAX;
}
value = (((u64)high) << 16) | low;
return value;
static int hw_atl_a0_hw_offload_set(struct aq_hw_s *self,
struct aq_nic_cfg_s *aq_nic_cfg)
{
- int err = 0;
-
/* TX checksums offloads*/
tpo_ipv4header_crc_offload_en_set(self, 1);
tpo_tcp_udp_crc_offload_en_set(self, 1);
- if (err < 0)
- goto err_exit;
/* RX checksums offloads*/
rpo_ipv4header_crc_offload_en_set(self, 1);
rpo_tcp_udp_crc_offload_en_set(self, 1);
- if (err < 0)
- goto err_exit;
/* LSO offloads*/
tdm_large_send_offload_en_set(self, 0xFFFFFFFFU);
- if (err < 0)
- goto err_exit;
-
- err = aq_hw_err_from_flags(self);
-err_exit:
- return err;
+ return aq_hw_err_from_flags(self);
}
static int hw_atl_a0_hw_init_tx_path(struct aq_hw_s *self)
static int hw_atl_b0_hw_offload_set(struct aq_hw_s *self,
struct aq_nic_cfg_s *aq_nic_cfg)
{
- int err = 0;
unsigned int i;
/* TX checksums offloads*/
tpo_ipv4header_crc_offload_en_set(self, 1);
tpo_tcp_udp_crc_offload_en_set(self, 1);
- if (err < 0)
- goto err_exit;
/* RX checksums offloads*/
rpo_ipv4header_crc_offload_en_set(self, 1);
rpo_tcp_udp_crc_offload_en_set(self, 1);
- if (err < 0)
- goto err_exit;
/* LSO offloads*/
tdm_large_send_offload_en_set(self, 0xFFFFFFFFU);
- if (err < 0)
- goto err_exit;
/* LRO offloads */
{
rpo_lro_en_set(self, aq_nic_cfg->is_lro ? 0xFFFFFFFFU : 0U);
}
- err = aq_hw_err_from_flags(self);
-
-err_exit:
- return err;
+ return aq_hw_err_from_flags(self);
}
static int hw_atl_b0_hw_init_tx_path(struct aq_hw_s *self)
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) &&
pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
+ err = -EIO;
goto err_dma;
}
* pcibios_set_master to do the needed arch specific settings */
pci_set_master(pdev);
- err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct atl2_adapter));
- if (!netdev)
+ if (!netdev) {
+ err = -ENOMEM;
goto err_alloc_etherdev;
+ }
SET_NETDEV_DEV(netdev, &pdev->dev);
if (err)
goto err_sw_init;
- err = -EIO;
-
netdev->hw_features = NETIF_F_HW_VLAN_CTAG_RX;
netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
dev->min_mtu = ETH_ZLEN;
dev->max_mtu = BNXT_MAX_MTU;
- bnxt_dcb_init(bp);
-
#ifdef CONFIG_BNXT_SRIOV
init_waitqueue_head(&bp->sriov_cfg_wait);
#endif
bnxt_hwrm_func_qcfg(bp);
bnxt_hwrm_port_led_qcaps(bp);
bnxt_ethtool_init(bp);
+ bnxt_dcb_init(bp);
bnxt_set_rx_skb_mode(bp, false);
bnxt_set_tpa_flags(bp);
if ((mode & DCB_CAP_DCBX_VER_CEE) || !(mode & DCB_CAP_DCBX_VER_IEEE))
return 1;
- if ((mode & DCB_CAP_DCBX_HOST) && BNXT_VF(bp))
- return 1;
+ if (mode & DCB_CAP_DCBX_HOST) {
+ if (BNXT_VF(bp) || (bp->flags & BNXT_FLAG_FW_LLDP_AGENT))
+ return 1;
+ }
if (mode == bp->dcbx_cap)
return 0;
#define T4FW_VERSION_MAJOR 0x01
#define T4FW_VERSION_MINOR 0x10
-#define T4FW_VERSION_MICRO 0x21
+#define T4FW_VERSION_MICRO 0x2B
#define T4FW_VERSION_BUILD 0x00
#define T4FW_MIN_VERSION_MAJOR 0x01
#define T5FW_VERSION_MAJOR 0x01
#define T5FW_VERSION_MINOR 0x10
-#define T5FW_VERSION_MICRO 0x21
+#define T5FW_VERSION_MICRO 0x2B
#define T5FW_VERSION_BUILD 0x00
#define T5FW_MIN_VERSION_MAJOR 0x00
#define T6FW_VERSION_MAJOR 0x01
#define T6FW_VERSION_MINOR 0x10
-#define T6FW_VERSION_MICRO 0x21
+#define T6FW_VERSION_MICRO 0x2B
#define T6FW_VERSION_BUILD 0x00
#define T6FW_MIN_VERSION_MAJOR 0x00
return 0;
}
+static const struct of_device_id ftmac100_of_ids[] = {
+ { .compatible = "andestech,atmac100" },
+ { }
+};
+
static struct platform_driver ftmac100_driver = {
.probe = ftmac100_probe,
.remove = ftmac100_remove,
.driver = {
.name = DRV_NAME,
+ .of_match_table = ftmac100_of_ids
},
};
MODULE_AUTHOR("Po-Yu Chuang <ratbert@faraday-tech.com>");
MODULE_DESCRIPTION("FTMAC100 driver");
MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, ftmac100_of_ids);
int port = 0;
if (msi_x) {
- int nreq = dev->caps.num_ports * num_online_cpus() + 1;
-
- nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
- nreq);
- if (nreq > MAX_MSIX)
- nreq = MAX_MSIX;
+ int nreq = min3(dev->caps.num_ports *
+ (int)num_online_cpus() + 1,
+ dev->caps.num_eqs - dev->caps.reserved_eqs,
+ MAX_MSIX);
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
config MLX5_CORE_EN
bool "Mellanox Technologies ConnectX-4 Ethernet support"
- depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
+ depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE
depends on IPV6=y || IPV6=n || MLX5_CORE=m
imply PTP_1588_CLOCK
default n
void mlx5e_destroy_direct_tirs(struct mlx5e_priv *priv);
void mlx5e_destroy_rqt(struct mlx5e_priv *priv, struct mlx5e_rqt *rqt);
-int mlx5e_create_ttc_table(struct mlx5e_priv *priv, u32 underlay_qpn);
+int mlx5e_create_ttc_table(struct mlx5e_priv *priv);
void mlx5e_destroy_ttc_table(struct mlx5e_priv *priv);
int mlx5e_create_tis(struct mlx5_core_dev *mdev, int tc,
ptys2ethtool_supported_port(link_ksettings, eth_proto_cap);
ptys2ethtool_supported_link(supported, eth_proto_cap);
ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Pause);
- ethtool_link_ksettings_add_link_mode(link_ksettings, supported, Asym_Pause);
}
static void get_advertising(u32 eth_proto_cap, u8 tx_pause,
unsigned long *advertising = link_ksettings->link_modes.advertising;
ptys2ethtool_adver_link(advertising, eth_proto_cap);
- if (tx_pause)
+ if (rx_pause)
ethtool_link_ksettings_add_link_mode(link_ksettings, advertising, Pause);
if (tx_pause ^ rx_pause)
ethtool_link_ksettings_add_link_mode(link_ksettings, advertising, Asym_Pause);
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0};
+ u32 rx_pause = 0;
+ u32 tx_pause = 0;
u32 eth_proto_cap;
u32 eth_proto_admin;
u32 eth_proto_lp;
an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
an_status = MLX5_GET(ptys_reg, out, an_status);
+ mlx5_query_port_pause(mdev, &rx_pause, &tx_pause);
+
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
get_supported(eth_proto_cap, link_ksettings);
- get_advertising(eth_proto_admin, 0, 0, link_ksettings);
+ get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings);
get_speed_duplex(netdev, eth_proto_oper, link_ksettings);
eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
mlx5e_destroy_flow_table(&ttc->ft);
}
-int mlx5e_create_ttc_table(struct mlx5e_priv *priv, u32 underlay_qpn)
+int mlx5e_create_ttc_table(struct mlx5e_priv *priv)
{
struct mlx5e_ttc_table *ttc = &priv->fs.ttc;
struct mlx5_flow_table_attr ft_attr = {};
ft_attr.max_fte = MLX5E_TTC_TABLE_SIZE;
ft_attr.level = MLX5E_TTC_FT_LEVEL;
ft_attr.prio = MLX5E_NIC_PRIO;
- ft_attr.underlay_qpn = underlay_qpn;
ft->t = mlx5_create_flow_table(priv->fs.ns, &ft_attr);
if (IS_ERR(ft->t)) {
priv->netdev->hw_features &= ~NETIF_F_NTUPLE;
}
- err = mlx5e_create_ttc_table(priv, 0);
+ err = mlx5e_create_ttc_table(priv);
if (err) {
netdev_err(priv->netdev, "Failed to create ttc table, err=%d\n",
err);
new_channels.params = priv->channels.params;
new_channels.params.num_tc = tc ? tc : 1;
- if (test_bit(MLX5E_STATE_OPENED, &priv->state)) {
+ if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) {
priv->channels.params = new_channels.params;
goto out;
}
#include "eswitch.h"
int mlx5_cmd_update_root_ft(struct mlx5_core_dev *dev,
- struct mlx5_flow_table *ft)
+ struct mlx5_flow_table *ft, u32 underlay_qpn)
{
u32 in[MLX5_ST_SZ_DW(set_flow_table_root_in)] = {0};
u32 out[MLX5_ST_SZ_DW(set_flow_table_root_out)] = {0};
if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) &&
- ft->underlay_qpn == 0)
+ underlay_qpn == 0)
return 0;
MLX5_SET(set_flow_table_root_in, in, opcode,
MLX5_CMD_OP_SET_FLOW_TABLE_ROOT);
MLX5_SET(set_flow_table_root_in, in, table_type, ft->type);
MLX5_SET(set_flow_table_root_in, in, table_id, ft->id);
+ MLX5_SET(set_flow_table_root_in, in, underlay_qpn, underlay_qpn);
if (ft->vport) {
MLX5_SET(set_flow_table_root_in, in, vport_number, ft->vport);
MLX5_SET(set_flow_table_root_in, in, other_vport, 1);
}
- if ((MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_IB) &&
- ft->underlay_qpn != 0)
- MLX5_SET(set_flow_table_root_in, in, underlay_qpn, ft->underlay_qpn);
-
return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
}
unsigned int index);
int mlx5_cmd_update_root_ft(struct mlx5_core_dev *dev,
- struct mlx5_flow_table *ft);
+ struct mlx5_flow_table *ft,
+ u32 underlay_qpn);
int mlx5_cmd_fc_alloc(struct mlx5_core_dev *dev, u16 *id);
int mlx5_cmd_fc_free(struct mlx5_core_dev *dev, u16 id);
if (ft->level >= min_level)
return 0;
- err = mlx5_cmd_update_root_ft(root->dev, ft);
+ err = mlx5_cmd_update_root_ft(root->dev, ft, root->underlay_qpn);
if (err)
mlx5_core_warn(root->dev, "Update root flow table of id=%u failed\n",
ft->id);
goto unlock_root;
}
- ft->underlay_qpn = ft_attr->underlay_qpn;
-
tree_init_node(&ft->node, 1, del_flow_table);
log_table_sz = ft->max_fte ? ilog2(ft->max_fte) : 0;
next_ft = find_next_chained_ft(fs_prio);
new_root_ft = find_next_ft(ft);
if (new_root_ft) {
- int err = mlx5_cmd_update_root_ft(root->dev, new_root_ft);
+ int err = mlx5_cmd_update_root_ft(root->dev, new_root_ft,
+ root->underlay_qpn);
if (err) {
mlx5_core_warn(root->dev, "Update root flow table of id=%u failed\n",
mlx5_cleanup_fs(dev);
return err;
}
+
+int mlx5_fs_add_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn)
+{
+ struct mlx5_flow_root_namespace *root = dev->priv.steering->root_ns;
+
+ root->underlay_qpn = underlay_qpn;
+ return 0;
+}
+EXPORT_SYMBOL(mlx5_fs_add_rx_underlay_qpn);
+
+int mlx5_fs_remove_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn)
+{
+ struct mlx5_flow_root_namespace *root = dev->priv.steering->root_ns;
+
+ root->underlay_qpn = 0;
+ return 0;
+}
+EXPORT_SYMBOL(mlx5_fs_remove_rx_underlay_qpn);
/* FWD rules that point on this flow table */
struct list_head fwd_rules;
u32 flags;
- u32 underlay_qpn;
};
struct mlx5_fc_cache {
struct mlx5_flow_table *root_ft;
/* Should be held when chaining flow tables */
struct mutex chain_lock;
+ u32 underlay_qpn;
};
int mlx5_init_fc_stats(struct mlx5_core_dev *dev);
mlx5e_build_nic_params(mdev, &priv->channels.params, profile->max_nch(mdev));
+ /* Override RQ params as IPoIB supports only LINKED LIST RQ for now */
+ mlx5e_set_rq_type_params(mdev, &priv->channels.params, MLX5_WQ_TYPE_LINKED_LIST);
+ priv->channels.params.lro_en = false;
+
mutex_init(&priv->state_lock);
netdev->hw_features |= NETIF_F_SG;
static void mlx5i_destroy_underlay_qp(struct mlx5_core_dev *mdev, struct mlx5_core_qp *qp)
{
+ mlx5_fs_remove_rx_underlay_qpn(mdev, qp->qpn);
+
mlx5_core_destroy_qp(mdev, qp);
}
return err;
}
+ mlx5_fs_add_rx_underlay_qpn(priv->mdev, ipriv->qp.qpn);
+
err = mlx5e_create_tis(priv->mdev, 0 /* tc */, ipriv->qp.qpn, &priv->tisn[0]);
if (err) {
mlx5_core_warn(priv->mdev, "create tis failed, %d\n", err);
static int mlx5i_create_flow_steering(struct mlx5e_priv *priv)
{
- struct mlx5i_priv *ipriv = priv->ppriv;
int err;
priv->fs.ns = mlx5_get_flow_namespace(priv->mdev,
priv->netdev->hw_features &= ~NETIF_F_NTUPLE;
}
- err = mlx5e_create_ttc_table(priv, ipriv->qp.qpn);
+ err = mlx5e_create_ttc_table(priv);
if (err) {
netdev_err(priv->netdev, "Failed to create ttc table, err=%d\n",
err);
entry->counter_valid = false;
entry->counter = 0;
+ entry->index = mlxsw_sp_rif_index(rif);
+
if (!counters_enabled)
return 0;
- entry->index = mlxsw_sp_rif_index(rif);
err = mlxsw_sp_rif_counter_value_get(mlxsw_sp, rif,
MLXSW_SP_RIF_COUNTER_EGRESS,
&cnt);
{
unsigned int *p_counter_index;
+ if (!mlxsw_sp_rif_counter_valid_get(rif, dir))
+ return;
+
p_counter_index = mlxsw_sp_rif_p_counter_get(rif, dir);
if (WARN_ON(!p_counter_index))
return;
err = mlxsw_sp_port_fdb_uc_op(mlxsw_sp, local_port, mac, fid,
adding, true);
if (err) {
- if (net_ratelimit())
- netdev_err(mlxsw_sp_port->dev, "Failed to set FDB entry\n");
+ dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Failed to set FDB entry\n");
return;
}
err = mlxsw_sp_port_fdb_uc_lag_op(mlxsw_sp, lag_id, mac, fid, lag_vid,
adding, true);
if (err) {
- if (net_ratelimit())
- netdev_err(mlxsw_sp_port->dev, "Failed to set FDB entry\n");
+ dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Failed to set FDB entry\n");
return;
}
cmd.req.arg3 = 0;
if (recv_ctx->state == NX_HOST_CTX_STATE_ACTIVE)
- netxen_issue_cmd(adapter, &cmd);
+ rcode = netxen_issue_cmd(adapter, &cmd);
if (rcode != NX_RCODE_SUCCESS)
return -EIO;
memset(&camline, 0, sizeof(union gft_cam_line_union));
qed_wr(p_hwfn, p_ptt, PRS_REG_GFT_CAM + CAM_LINE_SIZE * pf_id,
camline.cam_line_mapped.camline);
- memset(&ramline, 0, sizeof(union gft_cam_line_union));
+ memset(&ramline, 0, sizeof(ramline));
for (i = 0; i < RAM_LINE_SIZE / REG_SIZE; i++) {
u32 hw_addr = PRS_REG_GFT_PROFILE_MASK_RAM;
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 65
-#define QLCNIC_LINUX_VERSIONID "5.3.65"
+#define _QLCNIC_LINUX_SUBVERSION 66
+#define QLCNIC_LINUX_VERSIONID "5.3.66"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
return 0;
}
+void qlcnic_83xx_get_port_type(struct qlcnic_adapter *adapter)
+{
+ struct qlcnic_hardware_context *ahw = adapter->ahw;
+ struct qlcnic_cmd_args cmd;
+ u32 config;
+ int err;
+
+ err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_LINK_STATUS);
+ if (err)
+ return;
+
+ err = qlcnic_issue_cmd(adapter, &cmd);
+ if (err) {
+ dev_info(&adapter->pdev->dev,
+ "Get Link Status Command failed: 0x%x\n", err);
+ goto out;
+ } else {
+ config = cmd.rsp.arg[3];
+
+ switch (QLC_83XX_SFP_MODULE_TYPE(config)) {
+ case QLC_83XX_MODULE_FIBRE_1000BASE_SX:
+ case QLC_83XX_MODULE_FIBRE_1000BASE_LX:
+ case QLC_83XX_MODULE_FIBRE_1000BASE_CX:
+ case QLC_83XX_MODULE_TP_1000BASE_T:
+ ahw->port_type = QLCNIC_GBE;
+ break;
+ default:
+ ahw->port_type = QLCNIC_XGBE;
+ }
+ }
+out:
+ qlcnic_free_mbx_args(&cmd);
+}
+
int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
{
u8 pci_func;
int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *,
struct ethtool_pauseparam *);
int qlcnic_83xx_test_link(struct qlcnic_adapter *);
+void qlcnic_83xx_get_port_type(struct qlcnic_adapter *adapter);
int qlcnic_83xx_reg_test(struct qlcnic_adapter *);
int qlcnic_83xx_get_regs_len(struct qlcnic_adapter *);
int qlcnic_83xx_get_registers(struct qlcnic_adapter *, u32 *);
u32 ret = 0;
struct qlcnic_adapter *adapter = netdev_priv(dev);
+ if (qlcnic_83xx_check(adapter))
+ qlcnic_83xx_get_port_type(adapter);
+
if (adapter->ahw->port_type != QLCNIC_GBE)
return -EOPNOTSUPP;
/* Allocate rx SKB if we don't have one available. */
if (!qca->rx_skb) {
- qca->rx_skb = netdev_alloc_skb(net_dev,
- net_dev->mtu + VLAN_ETH_HLEN);
+ qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
+ net_dev->mtu +
+ VLAN_ETH_HLEN);
if (!qca->rx_skb) {
netdev_dbg(net_dev, "out of RX resources\n");
qca->stats.out_of_mem++;
qca->rx_skb, qca->rx_skb->dev);
qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx_ni(qca->rx_skb);
- qca->rx_skb = netdev_alloc_skb(net_dev,
+ qca->rx_skb = netdev_alloc_skb_ip_align(net_dev,
net_dev->mtu + VLAN_ETH_HLEN);
if (!qca->rx_skb) {
netdev_dbg(net_dev, "out of RX resources\n");
if (!qca->rx_buffer)
return -ENOBUFS;
- qca->rx_skb = netdev_alloc_skb(dev, qca->net_dev->mtu + VLAN_ETH_HLEN);
+ qca->rx_skb = netdev_alloc_skb_ip_align(dev, qca->net_dev->mtu +
+ VLAN_ETH_HLEN);
if (!qca->rx_skb) {
kfree(qca->rx_buffer);
netdev_info(qca->net_dev, "Failed to allocate RX sk_buff.\n");
/* MDIO bus init */
ret = sh_mdio_init(mdp, pd);
if (ret) {
- dev_err(&ndev->dev, "failed to initialise MDIO\n");
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "MDIO init failed: %d\n", ret);
goto out_release;
}
#include "mcdi.h"
enum {
- EFX_REV_SIENA_A0 = 0,
- EFX_REV_HUNT_A0 = 1,
+ /* Revisions 0-2 were Falcon A0, A1 and B0 respectively.
+ * They are not supported by this driver but these revision numbers
+ * form part of the ethtool API for register dumping.
+ */
+ EFX_REV_SIENA_A0 = 3,
+ EFX_REV_HUNT_A0 = 4,
};
static inline int efx_nic_rev(struct efx_nic *efx)
ep++;
} else {
seq_printf(seq, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
- i, (unsigned int)virt_to_phys(ep),
+ i, (unsigned int)virt_to_phys(p),
le32_to_cpu(p->des0), le32_to_cpu(p->des1),
le32_to_cpu(p->des2), le32_to_cpu(p->des3));
p++;
if (port) {
del_timer_sync(&port->vio.timer);
+ del_timer_sync(&port->clean_timer);
napi_disable(&port->napi);
+ unregister_netdev(port->dev);
list_del_rcu(&port->list);
synchronize_rcu();
- del_timer_sync(&port->clean_timer);
spin_lock_irqsave(&port->vp->lock, flags);
sunvnet_port_rm_txq_common(port);
spin_unlock_irqrestore(&port->vp->lock, flags);
dev_set_drvdata(&vdev->dev, NULL);
- unregister_netdev(port->dev);
free_netdev(port->dev);
}
tx_pipe->dma_channel = knav_dma_open_channel(dev,
tx_pipe->dma_chan_name, &config);
- if (IS_ERR_OR_NULL(tx_pipe->dma_channel)) {
+ if (IS_ERR(tx_pipe->dma_channel)) {
dev_err(dev, "failed opening tx chan(%s)\n",
tx_pipe->dma_chan_name);
+ ret = PTR_ERR(tx_pipe->dma_channel);
goto err;
}
netcp->rx_channel = knav_dma_open_channel(netcp->netcp_device->device,
netcp->dma_chan_name, &config);
- if (IS_ERR_OR_NULL(netcp->rx_channel)) {
+ if (IS_ERR(netcp->rx_channel)) {
dev_err(netcp->ndev_dev, "failed opening rx chan(%s\n",
netcp->dma_chan_name);
+ ret = PTR_ERR(netcp->rx_channel);
goto fail;
}
case HWTSTAMP_FILTER_NONE:
cpts_rx_enable(cpts, 0);
break;
- case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
* are "42101001.sb" or "42101002.sb"
*/
sprintf(stir421x_fw_name, "4210%4X.sb",
- self->usbdev->descriptor.bcdDevice);
+ le16_to_cpu(self->usbdev->descriptor.bcdDevice));
ret = request_firmware(&fw, stir421x_fw_name, &self->usbdev->dev);
if (ret < 0)
return ret;
*/
static struct lock_class_key macvlan_netdev_addr_lock_key;
-#define ALWAYS_ON_FEATURES \
- (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | NETIF_F_LLTX | \
+#define ALWAYS_ON_OFFLOADS \
+ (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | \
NETIF_F_GSO_ROBUST)
+#define ALWAYS_ON_FEATURES (ALWAYS_ON_OFFLOADS | NETIF_F_LLTX)
+
#define MACVLAN_FEATURES \
(NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
NETIF_F_GSO | NETIF_F_TSO | NETIF_F_UFO | NETIF_F_LRO | \
dev->features |= ALWAYS_ON_FEATURES;
dev->hw_features |= NETIF_F_LRO;
dev->vlan_features = lowerdev->vlan_features & MACVLAN_FEATURES;
+ dev->vlan_features |= ALWAYS_ON_OFFLOADS;
dev->gso_max_size = lowerdev->gso_max_size;
dev->gso_max_segs = lowerdev->gso_max_segs;
dev->hard_header_len = lowerdev->hard_header_len;
pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL);
if (pb == NULL) {
ret_val = -ENOMEM;
- goto err_parent_bus;
+ goto err_pb_kz;
}
-
pb->switch_data = data;
pb->switch_fn = switch_fn;
pb->current_child = -1;
cb->mii_bus = mdiobus_alloc();
if (!cb->mii_bus) {
ret_val = -ENOMEM;
+ devm_kfree(dev, cb);
of_node_put(child_bus_node);
break;
}
mdiobus_free(cb->mii_bus);
devm_kfree(dev, cb);
} else {
- of_node_get(child_bus_node);
cb->next = pb->children;
pb->children = cb;
}
return 0;
}
+ devm_kfree(dev, pb);
+err_pb_kz:
/* balance the reference of_mdio_find_bus() took */
- put_device(&pb->mii_bus->dev);
-
+ if (!mux_bus)
+ put_device(&parent_bus->dev);
err_parent_bus:
of_node_put(parent_bus_node);
return ret_val;
mutex_init(&bus->mdio_lock);
- if (bus->reset)
- bus->reset(bus);
-
/* de-assert bus level PHY GPIO resets */
if (bus->num_reset_gpios > 0) {
bus->reset_gpiod = devm_kcalloc(&bus->dev,
}
}
+ if (bus->reset)
+ bus->reset(bus);
+
for (i = 0; i < PHY_MAX_ADDR; i++) {
if ((bus->phy_mask & (1 << i)) == 0) {
struct phy_device *phydev;
int rd_mac_len = 0;
netdev_dbg(dev->net, "get_mac_address:\n\tusbnet VID:%0x PID:%0x\n",
- dev->udev->descriptor.idVendor,
- dev->udev->descriptor.idProduct);
+ le16_to_cpu(dev->udev->descriptor.idVendor),
+ le16_to_cpu(dev->udev->descriptor.idProduct));
memset(mac_addr, 0, sizeof(mac_addr));
rd_mac_len = control_read(dev, REQUEST_READ, 0,
{QMI_FIXED_INTF(0x1199, 0x9071, 10)}, /* Sierra Wireless MC74xx */
{QMI_FIXED_INTF(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */
{QMI_FIXED_INTF(0x1199, 0x9079, 10)}, /* Sierra Wireless EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */
+ {QMI_FIXED_INTF(0x1199, 0x907b, 10)}, /* Sierra Wireless EM74xx */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
if (ret < 0)
return ret;
- if (features & NETIF_F_HW_CSUM)
+ if (features & NETIF_F_IP_CSUM)
read_buf |= Tx_COE_EN_;
else
read_buf &= ~Tx_COE_EN_;
spin_lock_init(&pdata->mac_cr_lock);
+ /* LAN95xx devices do not alter the computed checksum of 0 to 0xffff.
+ * RFC 2460, ipv6 UDP calculated checksum yields a result of zero must
+ * be changed to 0xffff. RFC 768, ipv4 UDP computed checksum is zero,
+ * it is transmitted as all ones. The zero transmitted checksum means
+ * transmitter generated no checksum. Hence, enable csum offload only
+ * for ipv4 packets.
+ */
if (DEFAULT_TX_CSUM_ENABLE)
- dev->net->features |= NETIF_F_HW_CSUM;
+ dev->net->features |= NETIF_F_IP_CSUM;
if (DEFAULT_RX_CSUM_ENABLE)
dev->net->features |= NETIF_F_RXCSUM;
- dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
+ dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
smsc95xx_init_mac_address(dev);
/* we need to enable NAPI, otherwise dev_close will deadlock */
for (i = 0; i < adapter->num_rx_queues; i++)
napi_enable(&adapter->rx_queue[i].napi);
+ /*
+ * Need to clear the quiesce bit to ensure that vmxnet3_close
+ * can quiesce the device properly
+ */
+ clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
dev_close(adapter->netdev);
}
static int vrf_rcv_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
{
+ kfree_skb(skb);
return 0;
}
{
struct net *net = dev_net(dev);
- if (NF_HOOK(pf, hook, net, NULL, skb, dev, NULL, vrf_rcv_finish) < 0)
+ if (nf_hook(pf, hook, net, NULL, skb, dev, NULL, vrf_rcv_finish) != 1)
skb = NULL; /* kfree_skb(skb) handled by nf code */
return skb;
xennet_disconnect_backend(info);
xennet_destroy_queues(info);
out:
- unregister_netdev(info->netdev);
- xennet_free_netdev(info->netdev);
+ device_unregister(&dev->dev);
return err;
}
dev_info(ctrl->ctrl.device,
"NVME-FC{%d}: resetting controller\n", ctrl->cnum);
+ /* stop the queues on error, cleanup is in reset thread */
+ if (ctrl->queue_count > 1)
+ nvme_stop_queues(&ctrl->ctrl);
+
if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RECONNECTING)) {
dev_err(ctrl->ctrl.device,
"NVME-FC{%d}: error_recovery: Couldn't change state "
unsigned long flags;
int ret, idx;
+ if (!(rport->remoteport.port_role &
+ (FC_PORT_ROLE_NVME_DISCOVERY | FC_PORT_ROLE_NVME_TARGET))) {
+ ret = -EBADR;
+ goto out_fail;
+ }
+
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
if (!ctrl) {
ret = -ENOMEM;
if (dev->cmb) {
iounmap(dev->cmb);
dev->cmb = NULL;
+ if (dev->cmbsz) {
+ sysfs_remove_file_from_group(&dev->ctrl.device->kobj,
+ &dev_attr_cmb.attr, NULL);
+ dev->cmbsz = 0;
+ }
}
}
{
struct pci_dev *pdev = to_pci_dev(dev->dev);
+ nvme_release_cmb(dev);
pci_free_irq_vectors(pdev);
if (pci_is_enabled(pdev)) {
nvme_dev_disable(dev, true);
nvme_dev_remove_admin(dev);
nvme_free_queues(dev, 0);
- nvme_release_cmb(dev);
nvme_release_prp_pools(dev);
nvme_dev_unmap(dev);
nvme_put_ctrl(&dev->ctrl);
}
EXPORT_SYMBOL_GPL(nvmet_req_init);
+void nvmet_req_uninit(struct nvmet_req *req)
+{
+ percpu_ref_put(&req->sq->ref);
+}
+EXPORT_SYMBOL_GPL(nvmet_req_uninit);
+
static inline bool nvmet_cc_en(u32 cc)
{
return cc & 0x1;
{
int cpu, idx, cnt;
- if (!(tgtport->ops->target_features &
- NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED) ||
- tgtport->ops->max_hw_queues == 1)
+ if (tgtport->ops->max_hw_queues == 1)
return WORK_CPU_UNBOUND;
/* Simple cpu selection based on qid modulo active cpu count */
.dma_boundary = FCLOOP_DMABOUND_4G,
/* optional features */
.target_features = NVMET_FCTGTFEAT_CMD_IN_ISR |
- NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED |
NVMET_FCTGTFEAT_OPDONE_IN_ISR,
/* sizes of additional private data for data structures */
.target_priv_sz = sizeof(struct fcloop_tport),
bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq,
struct nvmet_sq *sq, struct nvmet_fabrics_ops *ops);
+void nvmet_req_uninit(struct nvmet_req *req);
void nvmet_req_complete(struct nvmet_req *req, u16 status);
void nvmet_cq_setup(struct nvmet_ctrl *ctrl, struct nvmet_cq *cq, u16 qid,
rsp->n_rdma = 0;
if (unlikely(wc->status != IB_WC_SUCCESS)) {
+ nvmet_req_uninit(&rsp->req);
nvmet_rdma_release_rsp(rsp);
if (wc->status != IB_WC_WR_FLUSH_ERR) {
pr_info("RDMA READ for CQE 0x%p failed with status %s (%d).\n",
/* Allocate memory for the expanded device tree */
mem = dt_alloc(size + 4, __alignof__(struct device_node));
+ if (!mem)
+ return NULL;
+
memset(mem, 0, size);
*(__be32 *)(mem + size) = cpu_to_be32(0xdeadbeef);
const struct of_device_id *i;
for (i = __reservedmem_of_table; i < &__rmem_of_table_sentinel; i++) {
- int const (*initfn)(struct reserved_mem *rmem) = i->data;
+ reservedmem_of_init_fn initfn = i->data;
const char *compat = i->compatible;
if (!of_flat_dt_is_compatible(rmem->fdt_node, compat))
power_zone->id = result;
idr_init(&power_zone->idr);
+ result = -ENOMEM;
power_zone->name = kstrdup(name, GFP_KERNEL);
if (!power_zone->name)
goto err_name_alloc;
}
spin_unlock_irqrestore(&rtc_lock, flags);
- pm_wakeup_event(dev, 0);
+ pm_wakeup_hard_event(dev);
acpi_clear_event(ACPI_EVENT_RTC);
acpi_disable_event(ACPI_EVENT_RTC, 0);
return ACPI_INTERRUPT_HANDLED;
static void __ccwgroup_remove_symlinks(struct ccwgroup_device *gdev)
{
int i;
- char str[8];
+ char str[16];
for (i = 0; i < gdev->count; i++) {
sprintf(str, "cdev%d", i);
static int __ccwgroup_create_symlinks(struct ccwgroup_device *gdev)
{
- char str[8];
+ char str[16];
int i, rc;
for (i = 0; i < gdev->count; i++) {
#include "qdio.h"
/* that gives us 15 characters in the text event views */
-#define QDIO_DBF_LEN 16
+#define QDIO_DBF_LEN 32
extern debug_info_t *qdio_dbf_setup;
extern debug_info_t *qdio_dbf_error;
};
struct qeth_discipline {
+ const struct device_type *devtype;
void (*start_poll)(struct ccw_device *, int, unsigned long);
qdio_handler_t *input_handler;
qdio_handler_t *output_handler;
extern struct qeth_discipline qeth_l3_discipline;
extern const struct attribute_group *qeth_generic_attr_groups[];
extern const struct attribute_group *qeth_osn_attr_groups[];
+extern const struct attribute_group qeth_device_attr_group;
+extern const struct attribute_group qeth_device_blkt_group;
+extern const struct device_type qeth_generic_devtype;
extern struct workqueue_struct *qeth_wq;
int qeth_card_hw_is_reachable(struct qeth_card *);
card->discipline = NULL;
}
-static const struct device_type qeth_generic_devtype = {
+const struct device_type qeth_generic_devtype = {
.name = "qeth_generic",
.groups = qeth_generic_attr_groups,
};
+EXPORT_SYMBOL_GPL(qeth_generic_devtype);
+
static const struct device_type qeth_osn_devtype = {
.name = "qeth_osn",
.groups = qeth_osn_attr_groups,
goto err_card;
}
- if (card->info.type == QETH_CARD_TYPE_OSN)
- gdev->dev.type = &qeth_osn_devtype;
- else
- gdev->dev.type = &qeth_generic_devtype;
-
switch (card->info.type) {
case QETH_CARD_TYPE_OSN:
case QETH_CARD_TYPE_OSM:
rc = qeth_core_load_discipline(card, QETH_DISCIPLINE_LAYER2);
if (rc)
goto err_card;
+
+ gdev->dev.type = (card->info.type != QETH_CARD_TYPE_OSN)
+ ? card->discipline->devtype
+ : &qeth_osn_devtype;
rc = card->discipline->setup(card->gdev);
if (rc)
goto err_disc;
- case QETH_CARD_TYPE_OSD:
- case QETH_CARD_TYPE_OSX:
+ break;
default:
+ gdev->dev.type = &qeth_generic_devtype;
break;
}
if (rc)
goto err;
rc = card->discipline->setup(card->gdev);
- if (rc)
+ if (rc) {
+ qeth_core_free_discipline(card);
goto err;
+ }
}
rc = card->discipline->set_online(gdev);
err:
if (card->options.layer2 == newdis)
goto out;
- else {
- card->info.mac_bits = 0;
- if (card->discipline) {
- card->discipline->remove(card->gdev);
- qeth_core_free_discipline(card);
- }
+ if (card->info.type == QETH_CARD_TYPE_OSM) {
+ /* fixed layer, can't switch */
+ rc = -EOPNOTSUPP;
+ goto out;
+ }
+
+ card->info.mac_bits = 0;
+ if (card->discipline) {
+ card->discipline->remove(card->gdev);
+ qeth_core_free_discipline(card);
}
rc = qeth_core_load_discipline(card, newdis);
goto out;
rc = card->discipline->setup(card->gdev);
+ if (rc)
+ qeth_core_free_discipline(card);
out:
mutex_unlock(&card->discipline_mutex);
return rc ? rc : count;
&dev_attr_inter_jumbo.attr,
NULL,
};
-static struct attribute_group qeth_device_blkt_group = {
+const struct attribute_group qeth_device_blkt_group = {
.name = "blkt",
.attrs = qeth_blkt_device_attrs,
};
+EXPORT_SYMBOL_GPL(qeth_device_blkt_group);
static struct attribute *qeth_device_attrs[] = {
&dev_attr_state.attr,
&dev_attr_switch_attrs.attr,
NULL,
};
-static struct attribute_group qeth_device_attr_group = {
+const struct attribute_group qeth_device_attr_group = {
.attrs = qeth_device_attrs,
};
+EXPORT_SYMBOL_GPL(qeth_device_attr_group);
const struct attribute_group *qeth_generic_attr_groups[] = {
&qeth_device_attr_group,
#include "qeth_core.h"
+extern const struct attribute_group *qeth_l2_attr_groups[];
+
int qeth_l2_create_device_attributes(struct device *);
void qeth_l2_remove_device_attributes(struct device *);
void qeth_l2_setup_bridgeport_attrs(struct qeth_card *card);
return 0;
}
+static const struct device_type qeth_l2_devtype = {
+ .name = "qeth_layer2",
+ .groups = qeth_l2_attr_groups,
+};
+
static int qeth_l2_probe_device(struct ccwgroup_device *gdev)
{
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+ int rc;
- qeth_l2_create_device_attributes(&gdev->dev);
+ if (gdev->dev.type == &qeth_generic_devtype) {
+ rc = qeth_l2_create_device_attributes(&gdev->dev);
+ if (rc)
+ return rc;
+ }
INIT_LIST_HEAD(&card->vid_list);
hash_init(card->mac_htable);
card->options.layer2 = 1;
{
struct qeth_card *card = dev_get_drvdata(&cgdev->dev);
- qeth_l2_remove_device_attributes(&cgdev->dev);
+ if (cgdev->dev.type == &qeth_generic_devtype)
+ qeth_l2_remove_device_attributes(&cgdev->dev);
qeth_set_allowed_threads(card, 0, 1);
wait_event(card->wait_q, qeth_threads_running(card, 0xffffffff) == 0);
case QETH_CARD_TYPE_OSN:
card->dev = alloc_netdev(0, "osn%d", NET_NAME_UNKNOWN,
ether_setup);
- card->dev->flags |= IFF_NOARP;
break;
default:
card->dev = alloc_etherdev(0);
card->dev->min_mtu = 64;
card->dev->max_mtu = ETH_MAX_MTU;
card->dev->netdev_ops = &qeth_l2_netdev_ops;
- card->dev->ethtool_ops =
- (card->info.type != QETH_CARD_TYPE_OSN) ?
- &qeth_l2_ethtool_ops : &qeth_l2_osn_ops;
+ if (card->info.type == QETH_CARD_TYPE_OSN) {
+ card->dev->ethtool_ops = &qeth_l2_osn_ops;
+ card->dev->flags |= IFF_NOARP;
+ } else {
+ card->dev->ethtool_ops = &qeth_l2_ethtool_ops;
+ }
card->dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
if (card->info.type == QETH_CARD_TYPE_OSD && !card->info.guestlan) {
card->dev->hw_features = NETIF_F_SG;
}
struct qeth_discipline qeth_l2_discipline = {
+ .devtype = &qeth_l2_devtype,
.start_poll = qeth_qdio_start_poll,
.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,
} else
qeth_bridgeport_an_set(card, 0);
}
+
+const struct attribute_group *qeth_l2_attr_groups[] = {
+ &qeth_device_attr_group,
+ &qeth_device_blkt_group,
+ /* l2 specific, see l2_{create,remove}_device_attributes(): */
+ &qeth_l2_bridgeport_attr_group,
+ NULL,
+};
static int qeth_l3_probe_device(struct ccwgroup_device *gdev)
{
struct qeth_card *card = dev_get_drvdata(&gdev->dev);
+ int rc;
- qeth_l3_create_device_attributes(&gdev->dev);
+ rc = qeth_l3_create_device_attributes(&gdev->dev);
+ if (rc)
+ return rc;
+ hash_init(card->ip_htable);
+ hash_init(card->ip_mc_htable);
card->options.layer2 = 0;
card->info.hwtrap = 0;
return 0;
}
struct qeth_discipline qeth_l3_discipline = {
+ .devtype = &qeth_generic_devtype,
.start_poll = qeth_qdio_start_poll,
.input_handler = (qdio_handler_t *) qeth_qdio_input_handler,
.output_handler = (qdio_handler_t *) qeth_qdio_output_handler,
} __packed;
struct virtio_feature_desc {
- __u32 features;
+ __le32 features;
__u8 index;
} __packed;
config CXLFLASH
tristate "Support for IBM CAPI Flash"
depends on PCI && SCSI && CXL && EEH
+ select IRQ_POLL
default m
help
Allows CAPI Accelerated IO to Flash
* can_queue. Eventually we will hit the point where we run
* on all reserved structs.
*/
-static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
+static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
{
struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
unsigned long flags;
int can_queue;
+ bool changed = false;
spin_lock_irqsave(lport->host->host_lock, flags);
if (!can_queue)
can_queue = 1;
lport->host->can_queue = can_queue;
+ changed = true;
unlock:
spin_unlock_irqrestore(lport->host->host_lock, flags);
+ return changed;
}
/*
if (!fc_fcp_lport_queue_ready(lport)) {
if (lport->qfull) {
- fc_fcp_can_queue_ramp_down(lport);
- shost_printk(KERN_ERR, lport->host,
- "libfc: queue full, "
- "reducing can_queue to %d.\n",
- lport->host->can_queue);
+ if (fc_fcp_can_queue_ramp_down(lport))
+ shost_printk(KERN_ERR, lport->host,
+ "libfc: queue full, "
+ "reducing can_queue to %d.\n",
+ lport->host->can_queue);
}
rc = SCSI_MLQUEUE_HOST_BUSY;
goto out;
void lpfc_reset_barrier(struct lpfc_hba *);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
int lpfc_sli_brdkill(struct lpfc_hba *);
+int lpfc_sli_chipset_init(struct lpfc_hba *phba);
int lpfc_sli_brdreset(struct lpfc_hba *);
int lpfc_sli_brdrestart(struct lpfc_hba *);
int lpfc_sli_hba_setup(struct lpfc_hba *);
NLP_EVT_DEVICE_RECOVERY);
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NVMET_RECOV;
- spin_lock_irq(shost->host_lock);
+ spin_unlock_irq(shost->host_lock);
}
}
LPFC_MBOXQ_t *mboxq;
MAILBOX_t *mb;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ /* Reset the port first */
+ lpfc_sli_brdrestart(phba);
+ rc = lpfc_sli_chipset_init(phba);
+ if (rc)
+ return (uint64_t)-1;
+ }
mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL);
lpfc_wq_destroy(phba, phba->sli4_hba.nvmels_wq);
/* Unset ELS work queue */
- if (phba->sli4_hba.els_cq)
+ if (phba->sli4_hba.els_wq)
lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
/* Unset unsolicited receive queue */
lpfc_tgttemplate.max_sgl_segments = phba->cfg_nvme_seg_cnt + 1;
lpfc_tgttemplate.max_hw_queues = phba->cfg_nvme_io_channel;
lpfc_tgttemplate.target_features = NVMET_FCTGTFEAT_READDATA_RSP |
- NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED |
NVMET_FCTGTFEAT_CMD_IN_ISR |
NVMET_FCTGTFEAT_OPDONE_IN_ISR;
/* Reset HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"0325 Reset HBA Data: x%x x%x\n",
- phba->pport->port_state, psli->sli_flag);
+ (phba->pport) ? phba->pport->port_state : 0,
+ psli->sli_flag);
/* perform board reset */
phba->fc_eventTag = 0;
phba->link_events = 0;
- phba->pport->fc_myDID = 0;
- phba->pport->fc_prevDID = 0;
+ if (phba->pport) {
+ phba->pport->fc_myDID = 0;
+ phba->pport->fc_prevDID = 0;
+ }
/* Turn off parity checking and serr during the physical reset */
pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
/* Restart HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"0337 Restart HBA Data: x%x x%x\n",
- phba->pport->port_state, psli->sli_flag);
+ (phba->pport) ? phba->pport->port_state : 0,
+ psli->sli_flag);
word0 = 0;
mb = (MAILBOX_t *) &word0;
readl(to_slim); /* flush */
/* Only skip post after fc_ffinit is completed */
- if (phba->pport->port_state)
+ if (phba->pport && phba->pport->port_state)
word0 = 1; /* This is really setting up word1 */
else
word0 = 0; /* This is really setting up word1 */
readl(to_slim); /* flush */
lpfc_sli_brdreset(phba);
- phba->pport->stopped = 0;
+ if (phba->pport)
+ phba->pport->stopped = 0;
phba->link_state = LPFC_INIT_START;
phba->hba_flag = 0;
spin_unlock_irq(&phba->hbalock);
* iteration, the function will restart the HBA again. The function returns
* zero if HBA successfully restarted else returns negative error code.
**/
-static int
+int
lpfc_sli_chipset_init(struct lpfc_hba *phba)
{
uint32_t status, i = 0;
pmcraid_err("couldn't build passthrough ioadls\n");
goto out_free_cmd;
}
- } else if (request_size < 0) {
- rc = -EINVAL;
- goto out_free_cmd;
}
/* If data is being written into the device, copy the data from user
uint16_t task_id;
uint32_t port_id; /* Remote port fabric ID */
int lun;
- char op; /* SCSI CDB */
+ unsigned char op; /* SCSI CDB */
uint8_t lba[4];
unsigned int bufflen; /* SCSI buffer length */
unsigned int sg_count; /* Number of SG elements */
did = fcport->rdata->ids.port_id;
sid = fcport->sid;
- __fc_fill_fc_hdr(fc_hdr, FC_RCTL_ELS_REQ, sid, did,
+ __fc_fill_fc_hdr(fc_hdr, FC_RCTL_ELS_REQ, did, sid,
FC_TYPE_ELS, FC_FC_FIRST_SEQ | FC_FC_END_SEQ |
FC_FC_SEQ_INIT, 0);
slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER;
slowpath_params.drv_rev = QEDF_DRIVER_REV_VER;
slowpath_params.drv_eng = QEDF_DRIVER_ENG_VER;
- memcpy(slowpath_params.name, "qedf", QED_DRV_VER_STR_SIZE);
+ strncpy(slowpath_params.name, "qedf", QED_DRV_VER_STR_SIZE);
rc = qed_ops->common->slowpath_start(qedf->cdev, &slowpath_params);
if (rc) {
QEDF_ERR(&(qedf->dbg_ctx), "Cannot start slowpath.\n");
struct scsi_device *sdev;
list_for_each_entry(sdev, &shost->__devices, siblings) {
+ if (sdev->sdev_state == SDEV_DEL)
+ continue;
if (sdev->channel == channel && sdev->id == id &&
sdev->lun ==lun)
return sdev;
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h> /* __scsi_init_queue() */
#include <scsi/scsi_dh.h>
#include <trace/events/scsi.h>
{ .compatible = "brcm,bcm7420-sun-top-ctrl", },
{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
{ .compatible = "brcm,bcm7429-sun-top-ctrl", },
- { .compatible = "brcm,bcm7425-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7435-sun-top-ctrl", },
{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
{ }
};
config IMX7_PM_DOMAINS
bool "i.MX7 PM domains"
- select PM_GENERIC_DOMAINS
depends on SOC_IMX7D || (COMPILE_TEST && OF)
+ depends on PM
+ select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
endmenu
* @name: slave channel name
* @config: dma configuration parameters
*
- * Returns pointer to appropriate DMA channel on success or NULL.
+ * Returns pointer to appropriate DMA channel on success or error.
*/
void *knav_dma_open_channel(struct device *dev, const char *name,
struct knav_dma_cfg *config)
+++ /dev/null
-Ion Memory Manager
-
-Ion is a memory manager that allows for sharing of buffers via dma-buf.
-Ion allows for different types of allocation via an abstraction called
-a 'heap'. A heap represents a specific type of memory. Each heap has
-a different type. There can be multiple instances of the same heap
-type.
-
-Specific heap instances are tied to heap IDs. Heap IDs are not to be specified
-in the devicetree.
-
-Required properties for Ion
-
-- compatible: "linux,ion" PLUS a compatible property for the device
-
-All child nodes of a linux,ion node are interpreted as heaps
-
-required properties for heaps
-
-- compatible: compatible string for a heap type PLUS a compatible property
-for the specific instance of the heap. Current heap types
--- linux,ion-heap-system
--- linux,ion-heap-system-contig
--- linux,ion-heap-carveout
--- linux,ion-heap-chunk
--- linux,ion-heap-dma
--- linux,ion-heap-custom
-
-Optional properties
-- memory-region: A phandle to a memory region. Required for DMA heap type
-(see reserved-memory.txt for details on the reservation)
-
-Example:
-
- ion {
- compatbile = "hisilicon,ion", "linux,ion";
-
- ion-system-heap {
- compatbile = "hisilicon,system-heap", "linux,ion-heap-system"
- };
-
- ion-camera-region {
- compatible = "hisilicon,camera-heap", "linux,ion-heap-dma"
- memory-region = <&camera_region>;
- };
-
- ion-fb-region {
- compatbile = "hisilicon,fb-heap", "linux,ion-heap-dma"
- memory-region = <&fb_region>;
- };
- }
rc = ssi_power_mgr_runtime_get(&drvdata->plat_dev->dev);
if (rc != 0) {
SSI_LOG_ERR("ssi_power_mgr_runtime_get returned %x\n",rc);
- spin_unlock_bh(&req_mgr_h->hw_lock);
return rc;
}
#endif
config FSL_DPAA2_ETH
tristate "Freescale DPAA2 Ethernet"
depends on FSL_DPAA2 && FSL_MC_DPIO
+ depends on NETDEVICES && ETHERNET
---help---
Ethernet driver for Freescale DPAA2 SoCs, using the
Freescale MC bus driver
switch (variable) {
case HW_VAR_BSSID:
- rtl92e_writel(dev, BSSIDR, ((u32 *)(val))[0]);
- rtl92e_writew(dev, BSSIDR+2, ((u16 *)(val+2))[0]);
+ /* BSSIDR 2 byte alignment */
+ rtl92e_writew(dev, BSSIDR, *(u16 *)val);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(val + 2));
break;
case HW_VAR_MEDIA_STATUS:
struct r8192_priv *priv = rtllib_priv(dev);
RT_TRACE(COMP_INIT, "===========>%s()\n", __func__);
- curCR = rtl92e_readl(dev, EPROM_CMD);
+ curCR = rtl92e_readw(dev, EPROM_CMD);
RT_TRACE(COMP_INIT, "read from Reg Cmd9346CR(%x):%x\n", EPROM_CMD,
curCR);
priv->epromtype = (curCR & EPROM_CMD_9356SEL) ? EEPROM_93C56 :
rtl92e_config_rate(dev, &rate_config);
priv->dot11CurrentPreambleMode = PREAMBLE_AUTO;
priv->basic_rate = rate_config &= 0x15f;
- rtl92e_writel(dev, BSSIDR, ((u32 *)net->bssid)[0]);
- rtl92e_writew(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
+ rtl92e_writew(dev, BSSIDR, *(u16 *)net->bssid);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(net->bssid + 2));
if (priv->rtllib->iw_mode == IW_MODE_ADHOC) {
rtl92e_writew(dev, ATIMWND, 2);
struct cb_desc *cb_desc, struct sk_buff *skb)
{
struct r8192_priv *priv = rtllib_priv(dev);
- dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ dma_addr_t mapping;
struct tx_fwinfo_8190pci *pTxFwInfo;
pTxFwInfo = (struct tx_fwinfo_8190pci *)skb->data;
pTxFwInfo->Short = _rtl92e_query_is_short(pTxFwInfo->TxHT,
pTxFwInfo->TxRate, cb_desc);
- if (pci_dma_mapping_error(priv->pdev, mapping))
- netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
if (cb_desc->bAMPDUEnable) {
pTxFwInfo->AllowAggregation = 1;
pTxFwInfo->RxMF = cb_desc->ampdu_factor;
}
memset((u8 *)pdesc, 0, 12);
+
+ mapping = pci_map_single(priv->pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
+ return;
+ }
+
pdesc->LINIP = 0;
pdesc->CmdInit = 1;
pdesc->Offset = sizeof(struct tx_fwinfo_8190pci) + 8;
pTsCommonInfo->TClasNum = TCLAS_Num;
}
-static bool IsACValid(unsigned int tid)
-{
- return tid < 7;
-}
-
bool GetTs(struct rtllib_device *ieee, struct ts_common_info **ppTS,
u8 *Addr, u8 TID, enum tr_select TxRxSelect, bool bAddNewTs)
{
if (ieee->current_network.qos_data.supported == 0) {
UP = 0;
} else {
- if (!IsACValid(TID)) {
- netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n",
- __func__, TID);
- return false;
- }
-
switch (TID) {
case 0:
case 3:
case 7:
UP = 7;
break;
+ default:
+ netdev_warn(ieee->dev, "%s(): TID(%d) is not valid\n",
+ __func__, TID);
+ return false;
}
}
pwdev_priv->power_mgmt = true;
else
pwdev_priv->power_mgmt = false;
- kfree((u8 *)wdev);
return ret;
#define FUSB302_RESUME_RETRY 10
#define FUSB302_RESUME_RETRY_SLEEP 50
-static int fusb302_i2c_write(struct fusb302_chip *chip,
- u8 address, u8 data)
+
+static bool fusb302_is_suspended(struct fusb302_chip *chip)
{
int retry_cnt;
- int ret = 0;
- atomic_set(&chip->i2c_busy, 1);
for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) {
if (atomic_read(&chip->pm_suspend)) {
- pr_err("fusb302_i2c: pm suspend, retry %d/%d\n",
- retry_cnt + 1, FUSB302_RESUME_RETRY);
+ dev_err(chip->dev, "i2c: pm suspend, retry %d/%d\n",
+ retry_cnt + 1, FUSB302_RESUME_RETRY);
msleep(FUSB302_RESUME_RETRY_SLEEP);
} else {
- break;
+ return false;
}
}
+
+ return true;
+}
+
+static int fusb302_i2c_write(struct fusb302_chip *chip,
+ u8 address, u8 data)
+{
+ int ret = 0;
+
+ atomic_set(&chip->i2c_busy, 1);
+
+ if (fusb302_is_suspended(chip)) {
+ atomic_set(&chip->i2c_busy, 0);
+ return -ETIMEDOUT;
+ }
+
ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
if (ret < 0)
fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
u8 length, const u8 *data)
{
- int retry_cnt;
int ret = 0;
if (length <= 0)
return ret;
atomic_set(&chip->i2c_busy, 1);
- for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) {
- if (atomic_read(&chip->pm_suspend)) {
- pr_err("fusb302_i2c: pm suspend, retry %d/%d\n",
- retry_cnt + 1, FUSB302_RESUME_RETRY);
- msleep(FUSB302_RESUME_RETRY_SLEEP);
- } else {
- break;
- }
+
+ if (fusb302_is_suspended(chip)) {
+ atomic_set(&chip->i2c_busy, 0);
+ return -ETIMEDOUT;
}
+
ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
length, data);
if (ret < 0)
static int fusb302_i2c_read(struct fusb302_chip *chip,
u8 address, u8 *data)
{
- int retry_cnt;
int ret = 0;
atomic_set(&chip->i2c_busy, 1);
- for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) {
- if (atomic_read(&chip->pm_suspend)) {
- pr_err("fusb302_i2c: pm suspend, retry %d/%d\n",
- retry_cnt + 1, FUSB302_RESUME_RETRY);
- msleep(FUSB302_RESUME_RETRY_SLEEP);
- } else {
- break;
- }
+
+ if (fusb302_is_suspended(chip)) {
+ atomic_set(&chip->i2c_busy, 0);
+ return -ETIMEDOUT;
}
+
ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
*data = (u8)ret;
if (ret < 0)
static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
u8 length, u8 *data)
{
- int retry_cnt;
int ret = 0;
if (length <= 0)
return ret;
atomic_set(&chip->i2c_busy, 1);
- for (retry_cnt = 0; retry_cnt < FUSB302_RESUME_RETRY; retry_cnt++) {
- if (atomic_read(&chip->pm_suspend)) {
- pr_err("fusb302_i2c: pm suspend, retry %d/%d\n",
- retry_cnt + 1, FUSB302_RESUME_RETRY);
- msleep(FUSB302_RESUME_RETRY_SLEEP);
- } else {
- break;
- }
+
+ if (fusb302_is_suspended(chip)) {
+ atomic_set(&chip->i2c_busy, 0);
+ return -ETIMEDOUT;
}
+
ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
length, data);
if (ret < 0) {
fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
address, length, ret);
- return ret;
+ goto done;
}
if (ret != length) {
fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
ret, length, address);
- return -EIO;
+ ret = -EIO;
}
+
+done:
atomic_set(&chip->i2c_busy, 0);
return ret;
ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
if (ret < 0)
return ret;
- chip->vbus_present = !!(FUSB_REG_STATUS0 & FUSB_REG_STATUS0_VBUSOK);
+ chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
if (ret < 0)
return ret;
buf[pos++] = FUSB302_TKN_SYNC1;
buf[pos++] = FUSB302_TKN_SYNC2;
- len = pd_header_cnt(msg->header) * 4;
+ len = pd_header_cnt_le(msg->header) * 4;
/* plug 2 for header */
len += 2;
if (len > 0x1F) {
(u8 *)&msg->header);
if (ret < 0)
return ret;
- len = pd_header_cnt(msg->header) * 4;
+ len = pd_header_cnt_le(msg->header) * 4;
/* add 4 to length to include the CRC */
if (len > PD_MAX_PAYLOAD * 4) {
fusb302_log(chip, "PD message too long %d", len);
if (ret < 0) {
fusb302_log(chip,
"cannot set GPIO Int_N to input, ret=%d", ret);
- gpio_free(chip->gpio_int_n);
return ret;
}
ret = gpio_to_irq(chip->gpio_int_n);
if (ret < 0) {
fusb302_log(chip,
"cannot request IRQ for GPIO Int_N, ret=%d", ret);
- gpio_free(chip->gpio_int_n);
return ret;
}
chip->gpio_int_n_irq = ret;
{.compatible = "fcs,fusb302"},
{},
};
+MODULE_DEVICE_TABLE(of, fusb302_dt_match);
static const struct i2c_device_id fusb302_i2c_device_id[] = {
{"typec_fusb302", 0},
{},
};
+MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
static const struct dev_pm_ops fusb302_pm_ops = {
.suspend = fusb302_pm_suspend,
return pd_header_type(le16_to_cpu(header));
}
+static inline unsigned int pd_header_msgid(u16 header)
+{
+ return (header >> PD_HEADER_ID_SHIFT) & PD_HEADER_ID_MASK;
+}
+
+static inline unsigned int pd_header_msgid_le(__le16 header)
+{
+ return pd_header_msgid(le16_to_cpu(header));
+}
+
#define PD_MAX_PAYLOAD 7
struct pd_message {
* VDM object is minimum of VDM header + 6 additional data objects.
*/
+#define VDO_MAX_OBJECTS 6
+#define VDO_MAX_SIZE (VDO_MAX_OBJECTS + 1)
+
/*
* VDM header
* ----------
* <5> :: reserved (SVDM), command type (UVDM)
* <4:0> :: command
*/
-#define VDO_MAX_SIZE 7
#define VDO(vid, type, custom) \
(((vid) << 16) | \
((type) << 15) | \
.max_register = 0x7F, /* 0x80 .. 0xFF are vendor defined */
};
-const struct tcpc_config tcpci_tcpc_config = {
+static const struct tcpc_config tcpci_tcpc_config = {
.type = TYPEC_PORT_DFP,
.default_role = TYPEC_SINK,
};
unsigned int hard_reset_count;
bool pd_capable;
bool explicit_contract;
+ unsigned int rx_msgid;
/* Partner capabilities/requests */
u32 sink_request;
unsigned int nr_src_pdo;
u32 snk_pdo[PDO_MAX_OBJECTS];
unsigned int nr_snk_pdo;
+ u32 snk_vdo[VDO_MAX_OBJECTS];
+ unsigned int nr_snk_vdo;
unsigned int max_snk_mv;
unsigned int max_snk_ma;
struct pd_mode_data *modep;
int rlen = 0;
u16 svid;
+ int i;
tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d",
p0, cmd_type, cmd, cnt);
case CMDT_INIT:
switch (cmd) {
case CMD_DISCOVER_IDENT:
+ /* 6.4.4.3.1: Only respond as UFP (device) */
+ if (port->data_role == TYPEC_DEVICE &&
+ port->nr_snk_vdo) {
+ for (i = 0; i < port->nr_snk_vdo; i++)
+ response[i + 1]
+ = cpu_to_le32(port->snk_vdo[i]);
+ rlen = port->nr_snk_vdo + 1;
+ }
break;
case CMD_DISCOVER_SVID:
break;
break;
case SOFT_RESET_SEND:
port->message_id = 0;
+ port->rx_msgid = -1;
if (port->pwr_role == TYPEC_SOURCE)
next_state = SRC_SEND_CAPABILITIES;
else
port->attached);
if (port->attached) {
+ enum pd_ctrl_msg_type type = pd_header_type_le(msg->header);
+ unsigned int msgid = pd_header_msgid_le(msg->header);
+
+ /*
+ * USB PD standard, 6.6.1.2:
+ * "... if MessageID value in a received Message is the
+ * same as the stored value, the receiver shall return a
+ * GoodCRC Message with that MessageID value and drop
+ * the Message (this is a retry of an already received
+ * Message). Note: this shall not apply to the Soft_Reset
+ * Message which always has a MessageID value of zero."
+ */
+ if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET)
+ goto done;
+ port->rx_msgid = msgid;
+
/*
* If both ends believe to be DFP/host, we have a data role
* mismatch.
}
}
+done:
mutex_unlock(&port->lock);
kfree(event);
}
}
ma = min(ma, port->max_snk_ma);
- /* XXX: Any other flags need to be set? */
- flags = 0;
+ flags = RDO_USB_COMM | RDO_NO_SUSPEND;
/* Set mismatch bit if offered power is less than operating power */
mw = ma * mv / 1000;
port->attached = false;
port->pd_capable = false;
+ /*
+ * First Rx ID should be 0; set this to a sentinel of -1 so that
+ * we can check tcpm_pd_rx_handler() if we had seen it before.
+ */
+ port->rx_msgid = -1;
+
port->tcpc->set_pd_rx(port->tcpc, false);
tcpm_init_vbus(port); /* also disables charging */
tcpm_init_vconn(port);
port->pwr_opmode = TYPEC_PWR_MODE_USB;
port->caps_count = 0;
port->message_id = 0;
+ port->rx_msgid = -1;
port->explicit_contract = false;
tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
break;
typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_USB);
port->pwr_opmode = TYPEC_PWR_MODE_USB;
port->message_id = 0;
+ port->rx_msgid = -1;
port->explicit_contract = false;
tcpm_set_state(port, SNK_DISCOVERY, 0);
break;
/* Soft_Reset states */
case SOFT_RESET:
port->message_id = 0;
+ port->rx_msgid = -1;
tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
if (port->pwr_role == TYPEC_SOURCE)
tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0);
break;
case SOFT_RESET_SEND:
port->message_id = 0;
+ port->rx_msgid = -1;
if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET))
tcpm_set_state_cond(port, hard_reset_state(port), 0);
else
break;
case PR_SWAP_SRC_SNK_SOURCE_OFF:
tcpm_set_cc(port, TYPEC_CC_RD);
+ /*
+ * USB-PD standard, 6.2.1.4, Port Power Role:
+ * "During the Power Role Swap Sequence, for the initial Source
+ * Port, the Port Power Role field shall be set to Sink in the
+ * PS_RDY Message indicating that the initial Source’s power
+ * supply is turned off"
+ */
+ tcpm_set_pwr_role(port, TYPEC_SINK);
if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
tcpm_set_state(port, ERROR_RECOVERY, 0);
break;
tcpm_set_state_cond(port, SNK_UNATTACHED, PD_T_PS_SOURCE_ON);
break;
case PR_SWAP_SRC_SNK_SINK_ON:
- tcpm_set_pwr_role(port, TYPEC_SINK);
tcpm_swap_complete(port, 0);
tcpm_set_state(port, SNK_STARTUP, 0);
break;
case PR_SWAP_SNK_SRC_SOURCE_ON:
tcpm_set_cc(port, tcpm_rp_cc(port));
tcpm_set_vbus(port, true);
- tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+ /*
+ * USB PD standard, 6.2.1.4:
+ * "Subsequent Messages initiated by the Policy Engine,
+ * such as the PS_RDY Message sent to indicate that Vbus
+ * is ready, will have the Port Power Role field set to
+ * Source."
+ */
tcpm_set_pwr_role(port, TYPEC_SOURCE);
+ tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
tcpm_swap_complete(port, 0);
tcpm_set_state(port, SRC_STARTUP, 0);
break;
return nr_pdo;
}
+static int tcpm_copy_vdos(u32 *dest_vdo, const u32 *src_vdo,
+ unsigned int nr_vdo)
+{
+ unsigned int i;
+
+ if (nr_vdo > VDO_MAX_OBJECTS)
+ nr_vdo = VDO_MAX_OBJECTS;
+
+ for (i = 0; i < nr_vdo; i++)
+ dest_vdo[i] = src_vdo[i];
+
+ return nr_vdo;
+}
+
void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo,
unsigned int nr_pdo)
{
tcpc->config->nr_src_pdo);
port->nr_snk_pdo = tcpm_copy_pdos(port->snk_pdo, tcpc->config->snk_pdo,
tcpc->config->nr_snk_pdo);
+ port->nr_snk_vdo = tcpm_copy_vdos(port->snk_vdo, tcpc->config->snk_vdo,
+ tcpc->config->nr_snk_vdo);
port->max_snk_mv = tcpc->config->max_snk_mv;
port->max_snk_ma = tcpc->config->max_snk_ma;
const u32 *snk_pdo;
unsigned int nr_snk_pdo;
+ const u32 *snk_vdo;
+ unsigned int nr_snk_vdo;
+
unsigned int max_snk_mv;
unsigned int max_snk_ma;
unsigned int max_snk_mw;
*/
sg_init_table(scatterlist, num_pages);
/* Now set the pages for each scatterlist */
- for (i = 0; i < num_pages; i++)
- sg_set_page(scatterlist + i, pages[i], PAGE_SIZE, 0);
+ for (i = 0; i < num_pages; i++) {
+ unsigned int len = PAGE_SIZE - offset;
+
+ if (len > count)
+ len = count;
+ sg_set_page(scatterlist + i, pages[i], len, offset);
+ offset = 0;
+ count -= len;
+ }
dma_buffers = dma_map_sg(g_dev,
scatterlist,
u32 addr = sg_dma_address(sg);
/* Note: addrs is the address + page_count - 1
- * The firmware expects the block to be page
+ * The firmware expects blocks after the first to be page-
* aligned and a multiple of the page size
*/
WARN_ON(len == 0);
- WARN_ON(len & ~PAGE_MASK);
- WARN_ON(addr & ~PAGE_MASK);
+ WARN_ON(i && (i != (dma_buffers - 1)) && (len & ~PAGE_MASK));
+ WARN_ON(i && (addr & ~PAGE_MASK));
if (k > 0 &&
- ((addrs[k - 1] & PAGE_MASK) |
- ((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT)
- == addr) {
- addrs[k - 1] += (len >> PAGE_SHIFT);
- } else {
- addrs[k++] = addr | ((len >> PAGE_SHIFT) - 1);
- }
+ ((addrs[k - 1] & PAGE_MASK) +
+ (((addrs[k - 1] & ~PAGE_MASK) + 1) << PAGE_SHIFT))
+ == (addr & PAGE_MASK))
+ addrs[k - 1] += ((len + PAGE_SIZE - 1) >> PAGE_SHIFT);
+ else
+ addrs[k++] = (addr & PAGE_MASK) |
+ (((len + PAGE_SIZE - 1) >> PAGE_SHIFT) - 1);
}
/* Partial cache lines (fragments) require special measures */
# Generic Trusted Execution Environment Configuration
config TEE
tristate "Trusted Execution Environment support"
+ depends on HAVE_ARM_SMCCC || COMPILE_TEST
select DMA_SHARED_BUFFER
select GENERIC_ALLOCATOR
help
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
ret = -ENOMEM;
- goto err_map_kobj;
+ goto err_map;
}
kobject_init(&map->kobj, &map_attr_type);
map->mem = mem;
goto err_map_kobj;
ret = kobject_uevent(&map->kobj, KOBJ_ADD);
if (ret)
- goto err_map;
+ goto err_map_kobj;
}
for (pi = 0; pi < MAX_UIO_PORT_REGIONS; pi++) {
portio = kzalloc(sizeof(*portio), GFP_KERNEL);
if (!portio) {
ret = -ENOMEM;
- goto err_portio_kobj;
+ goto err_portio;
}
kobject_init(&portio->kobj, &portio_attr_type);
portio->port = port;
goto err_portio_kobj;
ret = kobject_uevent(&portio->kobj, KOBJ_ADD);
if (ret)
- goto err_portio;
+ goto err_portio_kobj;
}
return 0;
if (userurb) { /* Async */
if (when == SUBMIT)
- dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+ dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
"length %u\n",
userurb, ep, t, d, length);
else
- dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
+ dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
"actual_length %u status %d\n",
userurb, ep, t, d, length,
timeout_or_status);
if (as) {
int retval;
- snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
return retval;
as = async_getcompleted(ps);
if (as) {
- snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
} else {
if (as) {
int retval;
- snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
return retval;
as = async_getcompleted(ps);
if (as) {
- snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
} else {
#endif
case USBDEVFS_DISCARDURB:
- snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p);
+ snoop(&dev->dev, "%s: DISCARDURB %pK\n", __func__, p);
ret = proc_unlinkurb(ps, p);
break;
if (retval == 0)
retval = -EINPROGRESS;
else if (retval != -EIDRM && retval != -EBUSY)
- dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+ dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
urb, retval);
usb_put_dev(udev);
}
/* kick hcd */
unlink1(hcd, urb, -ESHUTDOWN);
dev_dbg (hcd->self.controller,
- "shutdown urb %p ep%d%s%s\n",
+ "shutdown urb %pK ep%d%s%s\n",
urb, usb_endpoint_num(&ep->desc),
is_in ? "in" : "out",
({ char *s;
hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
GFP_KERNEL);
if (!hcd->bandwidth_mutex) {
+ kfree(hcd->address0_mutex);
kfree(hcd);
dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
return NULL;
}
/* USB 2.0 spec Section 11.24.4.5 */
-static int get_hub_descriptor(struct usb_device *hdev, void *data)
+static int get_hub_descriptor(struct usb_device *hdev,
+ struct usb_hub_descriptor *desc)
{
int i, ret, size;
unsigned dtype;
for (i = 0; i < 3; i++) {
ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
- dtype << 8, 0, data, size,
+ dtype << 8, 0, desc, size,
USB_CTRL_GET_TIMEOUT);
- if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
+ if (hub_is_superspeed(hdev)) {
+ if (ret == size)
+ return ret;
+ } else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) {
+ /* Make sure we have the DeviceRemovable field. */
+ size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1;
+ if (ret < size)
+ return -EMSGSIZE;
return ret;
+ }
}
return -EINVAL;
}
}
mutex_init(&hub->status_mutex);
- hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
+ hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
ret = -ENOMEM;
goto fail;
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
- * but the hub can/will return fewer bytes here.
+ * but a (non-SS) hub can/will return fewer bytes here.
*/
ret = get_hub_descriptor(hdev, hub->descriptor);
if (ret < 0) {
message = "can't read hub descriptor";
goto fail;
- } else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) {
+ }
+
+ maxchild = USB_MAXCHILDREN;
+ if (hub_is_superspeed(hdev))
+ maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS);
+
+ if (hub->descriptor->bNbrPorts > maxchild) {
message = "hub has too many ports!";
ret = -ENODEV;
goto fail;
*
* Find the companion device from platform bus.
*
+ * Takes a reference to the returned struct device which needs to be dropped
+ * after use.
+ *
* Return: On success, a pointer to the companion device, %NULL on failure.
*/
struct device *usb_of_get_companion_dev(struct device *dev)
if (!urb || !urb->complete)
return -EINVAL;
if (urb->hcpriv) {
- WARN_ONCE(1, "URB %p submitted while active\n", urb);
+ WARN_ONCE(1, "URB %pK submitted while active\n", urb);
return -EBUSY;
}
return PTR_ERR(kdwc->usbss);
kdwc->clk = devm_clk_get(kdwc->dev, "usb");
+ if (IS_ERR(kdwc->clk)) {
+ dev_err(kdwc->dev, "unable to get usb clock\n");
+ return PTR_ERR(kdwc->clk);
+ }
error = clk_prepare_enable(kdwc->clk);
if (error < 0) {
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
+#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee
+#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e
#define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
__dwc3_gadget_start_isoc(dwc, dep, cur_uf);
dep->flags &= ~DWC3_EP_PENDING_REQUEST;
}
+ return 0;
}
- return 0;
+
+ if ((dep->flags & DWC3_EP_BUSY) &&
+ !(dep->flags & DWC3_EP_MISSED_ISOC)) {
+ WARN_ON_ONCE(!dep->resource_index);
+ ret = __dwc3_gadget_kick_transfer(dep,
+ dep->resource_index);
+ }
+
+ goto out;
}
if (!dwc3_calc_trbs_left(dep))
return 0;
ret = __dwc3_gadget_kick_transfer(dep, 0);
+out:
if (ret == -EBUSY)
ret = 0;
return IRQ_HANDLED;
}
+ /*
+ * With PCIe legacy interrupt, test shows that top-half irq handler can
+ * be called again after HW interrupt deassertion. Check if bottom-half
+ * irq event handler completes before caching new event to prevent
+ * losing events.
+ */
+ if (evt->flags & DWC3_EVENT_PENDING)
+ return IRQ_HANDLED;
+
count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
count &= DWC3_GEVNTCOUNT_MASK;
if (!count)
ep->ep->driver_data = ep;
ep->ep->desc = ds;
- comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
- USB_DT_ENDPOINT_SIZE);
- ep->ep->maxburst = comp_desc->bMaxBurst + 1;
-
- if (needs_comp_desc)
+ if (needs_comp_desc) {
+ comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+ USB_DT_ENDPOINT_SIZE);
+ ep->ep->maxburst = comp_desc->bMaxBurst + 1;
ep->ep->comp_desc = comp_desc;
+ }
ret = usb_ep_enable(ep->ep);
if (likely(!ret)) {
struct gscons_info *info = &gscons_info;
unregister_console(&gserial_cons);
- if (info->console_thread != NULL)
+ if (!IS_ERR_OR_NULL(info->console_thread))
kthread_stop(info->console_thread);
gs_buf_free(&info->con_buf);
}
HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = 1;
desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
- desc->u.ss.DeviceRemovable = 0xffff;
+ desc->u.ss.DeviceRemovable = 0;
}
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
HUB_CHAR_INDV_PORT_LPSM |
HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = 1;
- desc->u.hs.DeviceRemovable[0] = 0xff;
- desc->u.hs.DeviceRemovable[1] = 0xff;
+ desc->u.hs.DeviceRemovable[0] = 0;
+ desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */
}
static int dummy_hub_control(
}
companion_dev = usb_of_get_companion_dev(hcd->self.controller);
- if (companion_dev)
+ if (companion_dev) {
device_pm_wait_for_dev(hcd->self.controller, companion_dev);
+ put_device(companion_dev);
+ }
ehci_resume(hcd, priv->reset_on_resume);
return 0;
time = 30;
break;
default:
- time = 300;
+ time = 50;
break;
}
pipe = td->pipe;
pipe_stop(r8a66597, pipe);
+ /* Select a different address or endpoint */
new_td = td;
do {
list_move_tail(&new_td->queue,
new_td = td;
break;
}
- } while (td != new_td && td->address == new_td->address);
+ } while (td != new_td && td->address == new_td->address &&
+ td->pipe->info.epnum == new_td->pipe->info.epnum);
start_transfer(r8a66597, new_td);
wait_for_completion(cmd->completion);
if (cmd->status == COMP_COMMAND_ABORTED ||
- cmd->status == COMP_STOPPED) {
+ cmd->status == COMP_COMMAND_RING_STOPPED) {
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
ret = -ETIME;
}
}
if (max_packet) {
- seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA);
+ seg->bounce_buf = kzalloc(max_packet, flags);
if (!seg->bounce_buf) {
dma_pool_free(xhci->segment_pool, seg->trbs, dma);
kfree(seg);
xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
for (i = 0; i < num_sp; i++) {
dma_addr_t dma;
- void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
+ void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma,
flags);
if (!buf)
goto fail_sp4;
/* Place limits on the number of roothub ports so that the hub
* descriptors aren't longer than the USB core will allocate.
*/
- if (xhci->num_usb3_ports > 15) {
+ if (xhci->num_usb3_ports > USB_SS_MAXPORTS) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Limiting USB 3.0 roothub ports to 15.");
- xhci->num_usb3_ports = 15;
+ "Limiting USB 3.0 roothub ports to %u.",
+ USB_SS_MAXPORTS);
+ xhci->num_usb3_ports = USB_SS_MAXPORTS;
}
if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
+#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
static const char hcd_name[] = "xhci_hcd";
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
+ pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
irq = platform_get_irq(pdev, 0);
if (irq < 0)
- return -ENODEV;
+ return irq;
/*
* sysdev must point to a device that is known to the system firmware
if (i_cmd->status != COMP_COMMAND_ABORTED)
continue;
- i_cmd->status = COMP_STOPPED;
+ i_cmd->status = COMP_COMMAND_RING_STOPPED;
xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
i_cmd->command_trb);
xhci_urb_free_priv(urb_priv);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock(&xhci->lock);
- usb_hcd_giveback_urb(hcd, urb, status);
trace_xhci_urb_giveback(urb);
+ usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&xhci->lock);
}
cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
- if (cmd_comp_code == COMP_STOPPED) {
+ if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
complete_all(&xhci->cmd_ring_stop_completion);
return;
}
break;
case TRB_CMD_NOOP:
/* Is this an aborted command turned to NO-OP? */
- if (cmd->status == COMP_STOPPED)
- cmd_comp_code = COMP_STOPPED;
+ if (cmd->status == COMP_COMMAND_RING_STOPPED)
+ cmd_comp_code = COMP_COMMAND_RING_STOPPED;
break;
case TRB_RESET_EP:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
union xhci_trb *event_ring_deq;
irqreturn_t ret = IRQ_NONE;
+ unsigned long flags;
dma_addr_t deq;
u64 temp_64;
u32 status;
- spin_lock(&xhci->lock);
+ spin_lock_irqsave(&xhci->lock, flags);
/* Check if the xHC generated the interrupt, or the irq is shared */
status = readl(&xhci->op_regs->status);
if (status == ~(u32)0) {
*/
status |= STS_EINT;
writel(status, &xhci->op_regs->status);
- /* FIXME when MSI-X is supported and there are multiple vectors */
- /* Clear the MSI-X event interrupt status */
- if (hcd->irq) {
+ if (!hcd->msi_enabled) {
u32 irq_pending;
- /* Acknowledge the PCI interrupt */
irq_pending = readl(&xhci->ir_set->irq_pending);
irq_pending |= IMAN_IP;
writel(irq_pending, &xhci->ir_set->irq_pending);
ret = IRQ_HANDLED;
out:
- spin_unlock(&xhci->lock);
+ spin_unlock_irqrestore(&xhci->lock, flags);
return ret;
}
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
- if (!ret)
- /* hcd->irq is 0, we have MSI */
+ if (!ret) {
+ hcd->msi_enabled = 1;
return 0;
+ }
if (!pdev->irq) {
xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
switch (*cmd_status) {
case COMP_COMMAND_ABORTED:
- case COMP_STOPPED:
+ case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
ret = -ETIME;
break;
switch (*cmd_status) {
case COMP_COMMAND_ABORTED:
- case COMP_STOPPED:
+ case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
ret = -ETIME;
break;
ret = reset_device_cmd->status;
switch (ret) {
case COMP_COMMAND_ABORTED:
- case COMP_STOPPED:
+ case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout waiting for reset device command\n");
ret = -ETIME;
goto command_cleanup;
*/
switch (command->status) {
case COMP_COMMAND_ABORTED:
- case COMP_STOPPED:
+ case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for setup device command\n");
ret = -ETIME;
break;
dev->in_ep = in_ep;
- if (udev->descriptor.idVendor != ALEA_VENDOR_ID)
+ if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
dev->reads_started = 1;
dev->size = size;
info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
- info.speed = le16_to_cpu(dev->udev->speed);
+ info.speed = dev->udev->speed;
info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
info.report_size = dev->report_size;
USB_MAJOR, dev->minor);
exit:
+ kfree(get_version_reply);
return retval;
error:
mutex_unlock(&sisusb->lock);
- return 1;
+ return true;
}
/* Interface routine */
int ret;
struct usb_hcd *hcd = musb->hcd;
- MUSB_HST_MODE(musb);
- musb->xceiv->otg->default_a = 1;
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
-
+ if (musb->port_mode == MUSB_PORT_MODE_HOST) {
+ MUSB_HST_MODE(musb);
+ musb->xceiv->otg->default_a = 1;
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ }
otg_set_host(musb->xceiv->otg, &hcd->self);
hcd->self.otg_port = 1;
musb->xceiv->otg->host = &hcd->self;
u32 dma_remaining;
int src_burst, dst_burst;
u16 csr;
+ u32 psize;
int ch;
s8 dmareq;
s8 sync_dev;
if (chdat->tx) {
/* Send transfer_packet_sz packets at a time */
- musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
- chdat->transfer_packet_sz);
+ psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+ psize &= ~0x7ff;
+ psize |= chdat->transfer_packet_sz;
+ musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
} else {
/* Receive transfer_packet_sz packets at a time */
- musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
- chdat->transfer_packet_sz << 16);
+ psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
+ psize &= ~(0x7ff << 16);
+ psize |= (chdat->transfer_packet_sz << 16);
+ musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
- .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
+ { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
(new_serial.flags & ASYNC_FLAGS));
priv->custom_divisor = new_serial.custom_divisor;
+check_and_exit:
write_latency_timer(port);
-check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) {
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
/* Olimex */
#define OLIMEX_VID 0x15BA
#define OLIMEX_ARM_USB_OCD_PID 0x0003
+#define OLIMEX_ARM_USB_TINY_PID 0x0004
+#define OLIMEX_ARM_USB_TINY_H_PID 0x002a
#define OLIMEX_ARM_USB_OCD_H_PID 0x002b
/*
if (!baud) {
/* pick a default, any default... */
baud = 9600;
- } else
+ } else {
+ /* Avoid a zero divisor. */
+ baud = min(baud, 461550);
tty_encode_baud_rate(tty, baud, baud);
+ }
edge_port->baud_rate = baud;
config->wBaudRate = (__u16)((461550L + baud/2) / baud);
static int ir_startup(struct usb_serial *serial)
{
struct usb_irda_cs_descriptor *irda_desc;
+ int rates;
irda_desc = irda_usb_find_class_desc(serial, 0);
if (!irda_desc) {
return -ENODEV;
}
+ rates = le16_to_cpu(irda_desc->wBaudRate);
+
dev_dbg(&serial->dev->dev,
"%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
__func__,
- (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "",
- (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : "");
+ (rates & USB_IRDA_BR_2400) ? " 2400" : "",
+ (rates & USB_IRDA_BR_9600) ? " 9600" : "",
+ (rates & USB_IRDA_BR_19200) ? " 19200" : "",
+ (rates & USB_IRDA_BR_38400) ? " 38400" : "",
+ (rates & USB_IRDA_BR_57600) ? " 57600" : "",
+ (rates & USB_IRDA_BR_115200) ? " 115200" : "",
+ (rates & USB_IRDA_BR_576000) ? " 576000" : "",
+ (rates & USB_IRDA_BR_1152000) ? " 1152000" : "",
+ (rates & USB_IRDA_BR_4000000) ? " 4000000" : "");
switch (irda_desc->bmAdditionalBOFs) {
case USB_IRDA_AB_48:
return -ENOMEM;
divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
- put_unaligned_le32(cpu_to_le32(divisor), buf);
+ put_unaligned_le32(divisor, buf);
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
#define TELIT_PRODUCT_LE922_USBCFG0 0x1042
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
+#define TELIT_PRODUCT_ME910 0x1100
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
#define TELIT_PRODUCT_LE910_USBCFG4 0x1206
.reserved = BIT(5) | BIT(6),
};
+static const struct option_blacklist_info telit_me910_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(1) | BIT(3),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
+ .driver_info = (kernel_ulong_t)&telit_me910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
{DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
+ {DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */
+ {DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
#define SD_BLOCK_LEN 9
struct ene_ub6250_info {
+
+ /* I/O bounce buffer */
+ u8 *bbuf;
+
/* for 6250 code */
struct SD_STATUS SD_Status;
struct MS_STATUS MS_Status;
static void ene_ub6250_info_destructor(void *extra)
{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
+
if (!extra)
return;
+ kfree(info->bbuf);
}
static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
u32 bn = PhyBlockAddr * 0x20 + PageNum;
result = ene_load_bincode(us, MS_RW_PATTERN);
bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
ExtraDat->status0 = 0x10; /* Not yet,fireware support */
ExtraDat->status1 = 0x00; /* Not yet,fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
int result;
- u8 ExtBuf[4];
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
bcb->CDB[6] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */
ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */
ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */
- ExtraDat->ovrflg = ExtBuf[0];
- ExtraDat->mngflg = ExtBuf[1];
- ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
+ ExtraDat->ovrflg = bbuf[0];
+ ExtraDat->mngflg = bbuf[1];
+ ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
u16 PhyBlock, newblk, i;
u16 LogStart, LogEnde;
struct ms_lib_type_extdat extdat;
- u8 buf[0x200];
u32 count = 0, index = 0;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
}
if (count == PhyBlock) {
- ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
+ ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
+ bbuf);
count += 0x80;
}
index = (PhyBlock % 0x80) * 4;
- extdat.ovrflg = buf[index];
- extdat.mngflg = buf[index+1];
- extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
+ extdat.ovrflg = bbuf[index];
+ extdat.mngflg = bbuf[index+1];
+ extdat.logadr = memstick_logaddr(bbuf[index+2],
+ bbuf[index+3]);
if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
ms_lib_setacquired_errorblock(us, PhyBlock);
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
- u8 buf[0x200];
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
printk(KERN_INFO "transport --- ENE_MSInit\n");
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x01;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
printk(KERN_ERR "Execution MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
- info->MS_Status = *(struct MS_STATUS *)&buf[0];
+ info->MS_Status = *(struct MS_STATUS *) bbuf;
if (info->MS_Status.Insert && info->MS_Status.Ready) {
printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
if (info->MS_Status.IsMSPro) {
- MSP_BlockSize = (buf[6] << 8) | buf[7];
- MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
+ MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
+ MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
} else {
ms_card_init(us); /* Card is MS (to ms.c)*/
}
usb_stor_dbg(us, "MS Init Code OK !!\n");
} else {
- usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
static int ene_sd_init(struct us_data *us)
{
int result;
- u8 buf[0x200];
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ u8 *bbuf = info->bbuf;
usb_stor_dbg(us, "transport --- ENE_SDInit\n");
/* SD Init Part-1 */
bcb->Flags = US_BULK_FLAG_IN;
bcb->CDB[0] = 0xF1;
- result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
+ result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
- info->SD_Status = *(struct SD_STATUS *)&buf[0];
+ info->SD_Status = *(struct SD_STATUS *) bbuf;
if (info->SD_Status.Insert && info->SD_Status.Ready) {
struct SD_STATUS *s = &info->SD_Status;
- ene_get_card_status(us, (unsigned char *)&buf);
+ ene_get_card_status(us, bbuf);
usb_stor_dbg(us, "Insert = %x\n", s->Insert);
usb_stor_dbg(us, "Ready = %x\n", s->Ready);
usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
usb_stor_dbg(us, "WtP = %x\n", s->WtP);
} else {
- usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
+ usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
static int ene_init(struct us_data *us)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
+ u8 *bbuf = info->bbuf;
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
if (!info->SD_Status.Ready) {
result = ene_sd_init(us);
const struct usb_device_id *id)
{
int result;
- u8 misc_reg03 = 0;
+ u8 misc_reg03;
struct us_data *us;
+ struct ene_ub6250_info *info;
result = usb_stor_probe1(&us, intf, id,
(id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,
return result;
/* FIXME: where should the code alloc extra buf ? */
- if (!us->extra) {
- us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
- if (!us->extra)
- return -ENOMEM;
- us->extra_destructor = ene_ub6250_info_destructor;
+ us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
+ if (!us->extra)
+ return -ENOMEM;
+ us->extra_destructor = ene_ub6250_info_destructor;
+
+ info = (struct ene_ub6250_info *)(us->extra);
+ info->bbuf = kmalloc(512, GFP_KERNEL);
+ if (!info->bbuf) {
+ kfree(us->extra);
+ return -ENOMEM;
}
us->transport_name = "ene_ub6250";
return result;
/* probe card type */
- result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
+ result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_disconnect(intf);
return USB_STOR_TRANSPORT_ERROR;
}
+ misc_reg03 = info->bbuf[0];
if (!(misc_reg03 & 0x01)) {
pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
"It does not support SM cards.\n");
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
+ int width;
+
memset(desc, 0, sizeof(*desc));
desc->bDescriptorType = USB_DT_HUB;
- desc->bDescLength = 9;
desc->wHubCharacteristics = cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+
desc->bNbrPorts = VHCI_HC_PORTS;
- desc->u.hs.DeviceRemovable[0] = 0xff;
- desc->u.hs.DeviceRemovable[1] = 0xff;
+ BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
+ width = desc->bNbrPorts / 8 + 1;
+ desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
+ memset(&desc->u.hs.DeviceRemovable[0], 0, width);
+ memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
}
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
static
int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
+ struct usb_device *udev = interface_to_usbdev(iface);
struct i1480_usb *i1480_usb;
struct i1480 *i1480;
struct device *dev = &iface->dev;
iface->cur_altsetting->desc.bInterfaceNumber);
goto error;
}
- if (iface->num_altsetting > 1
- && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
+ if (iface->num_altsetting > 1 &&
+ le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
if (result < 0)
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || COMPILE_TEST
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
depends on ARM
select WATCHDOG_CORE
help
if (!wdt)
return -ENOMEM;
+ spin_lock_init(&wdt->lock);
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt->base = devm_ioremap_resource(dev, res);
if (IS_ERR(wdt->base))
return ret;
}
- spin_lock_init(&wdt->lock);
platform_set_drvdata(pdev, wdt);
watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
bcm_kona_wdt_wdd.parent = &pdev->dev;
/* Counter maximum value */
#define CDNS_WDT_COUNTER_MAX 0xFFF
-static int wdt_timeout = CDNS_WDT_DEFAULT_TIMEOUT;
+static int wdt_timeout;
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(wdt_timeout, int, 0);
iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
+ /* Reset the timeout status bit so that the timer
+ * needs to count down twice again before rebooting */
+ outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
+
/* Reload the timer by writing to the TCO Timer Counter register */
- if (p->iTCO_version >= 2) {
+ if (p->iTCO_version >= 2)
outw(0x01, TCO_RLD(p));
- } else if (p->iTCO_version == 1) {
- /* Reset the timeout status bit so that the timer
- * needs to count down twice again before rebooting */
- outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
-
+ else if (p->iTCO_version == 1)
outb(0x01, TCO_RLD(p));
- }
spin_unlock(&p->io_lock);
return 0;
unsigned char val8;
unsigned int tmrval;
- tmrval = seconds_to_ticks(p, t);
-
- /* For TCO v1 the timer counts down twice before rebooting */
- if (p->iTCO_version == 1)
- tmrval /= 2;
+ /* The timer counts down twice before rebooting */
+ tmrval = seconds_to_ticks(p, t) / 2;
/* from the specs: */
/* "Values of 0h-3h are ignored and should not be attempted" */
spin_lock(&p->io_lock);
val16 = inw(TCO_RLD(p));
val16 &= 0x3ff;
+ if (!(inw(TCO1_STS(p)) & 0x0008))
+ val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
spin_unlock(&p->io_lock);
time_left = ticks_to_seconds(p, val16);
return -ENODEV;
}
+ if (iface_desc->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* check out the endpoint: it has to be Interrupt & IN */
endpoint = &iface_desc->endpoint[0].desc;
* Licensed under GPLv2.
*/
+#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
struct watchdog_device wdd;
void __iomem *reg_base;
u32 mr;
+ unsigned long last_ping;
};
static int wdt_timeout = WDT_DEFAULT_TIMEOUT;
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS))
+
#define wdt_read(wdt, field) \
readl_relaxed((wdt)->reg_base + (field))
-#define wdt_write(wtd, field, val) \
- writel_relaxed((val), (wdt)->reg_base + (field))
+/* 4 slow clock periods is 4/32768 = 122.07µs*/
+#define WDT_DELAY usecs_to_jiffies(123)
+
+static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+ /*
+ * WDT_CR and WDT_MR must not be modified within three slow clock
+ * periods following a restart of the watchdog performed by a write
+ * access in WDT_CR.
+ */
+ while (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+ usleep_range(30, 125);
+ writel_relaxed(val, wdt->reg_base + field);
+ wdt->last_ping = jiffies;
+}
+
+static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+ if (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+ udelay(123);
+ writel_relaxed(val, wdt->reg_base + field);
+ wdt->last_ping = jiffies;
+}
static int sama5d4_wdt_start(struct watchdog_device *wdd)
{
wdt->mr &= ~AT91_WDT_WDD;
wdt->mr |= AT91_WDT_SET_WDV(value);
wdt->mr |= AT91_WDT_SET_WDD(value);
- wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+
+ /*
+ * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When
+ * setting the WDDIS bit, and while it is set, the fields WDV and WDD
+ * must not be modified.
+ * If the watchdog is enabled, then the timeout can be updated. Else,
+ * wait that the user enables it.
+ */
+ if (wdt_enabled)
+ wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
wdd->timeout = timeout;
static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
{
- struct watchdog_device *wdd = &wdt->wdd;
- u32 value = WDT_SEC2TICKS(wdd->timeout);
u32 reg;
-
/*
- * Because the fields WDV and WDD must not be modified when the WDDIS
- * bit is set, so clear the WDDIS bit before writing the WDT_MR.
+ * When booting and resuming, the bootloader may have changed the
+ * watchdog configuration.
+ * If the watchdog is already running, we can safely update it.
+ * Else, we have to disable it properly.
*/
- reg = wdt_read(wdt, AT91_WDT_MR);
- reg &= ~AT91_WDT_WDDIS;
- wdt_write(wdt, AT91_WDT_MR, reg);
-
- wdt->mr |= AT91_WDT_SET_WDD(value);
- wdt->mr |= AT91_WDT_SET_WDV(value);
-
- wdt_write(wdt, AT91_WDT_MR, wdt->mr);
-
+ if (wdt_enabled) {
+ wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+ } else {
+ reg = wdt_read(wdt, AT91_WDT_MR);
+ if (!(reg & AT91_WDT_WDDIS))
+ wdt_write_nosleep(wdt, AT91_WDT_MR,
+ reg | AT91_WDT_WDDIS);
+ }
return 0;
}
struct resource *res;
void __iomem *regs;
u32 irq = 0;
+ u32 timeout;
int ret;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
wdd->ops = &sama5d4_wdt_ops;
wdd->min_timeout = MIN_WDT_TIMEOUT;
wdd->max_timeout = MAX_WDT_TIMEOUT;
+ wdt->last_ping = jiffies;
watchdog_set_drvdata(wdd, wdt);
return ret;
}
+ timeout = WDT_SEC2TICKS(wdd->timeout);
+
+ wdt->mr |= AT91_WDT_SET_WDD(timeout);
+ wdt->mr |= AT91_WDT_SET_WDV(timeout);
+
ret = sama5d4_wdt_init(wdt);
if (ret)
return ret;
{
struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
- wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
- if (wdt->mr & AT91_WDT_WDDIS)
- wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+ sama5d4_wdt_init(wdt);
return 0;
}
pr_crit("Would Reboot\n");
#else
pr_crit("Initiating system reboot\n");
- emergency_restart(NULL);
+ emergency_restart();
#endif
#else
pr_crit("Reset in 5ms\n");
base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt->reg_base = devm_ioremap_resource(dev, base);
- if (IS_ERR(wdt->reg_base)) {
- dev_err(dev, "ioremap failed\n");
+ if (IS_ERR(wdt->reg_base))
return PTR_ERR(wdt->reg_base);
- }
zx2967_wdt_reset_sysctrl(dev);
u32 acllen = 0;
int rc = 0;
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
- struct cifs_tcon *tcon;
+ struct smb_version_operations *ops;
cifs_dbg(NOISY, "converting ACL to mode for %s\n", path);
if (IS_ERR(tlink))
return PTR_ERR(tlink);
- tcon = tlink_tcon(tlink);
- if (pfid && (tcon->ses->server->ops->get_acl_by_fid))
- pntsd = tcon->ses->server->ops->get_acl_by_fid(cifs_sb, pfid,
- &acllen);
- else if (tcon->ses->server->ops->get_acl)
- pntsd = tcon->ses->server->ops->get_acl(cifs_sb, inode, path,
- &acllen);
+ ops = tlink_tcon(tlink)->ses->server->ops;
+
+ if (pfid && (ops->get_acl_by_fid))
+ pntsd = ops->get_acl_by_fid(cifs_sb, pfid, &acllen);
+ else if (ops->get_acl)
+ pntsd = ops->get_acl(cifs_sb, inode, path, &acllen);
else {
cifs_put_tlink(tlink);
return -EOPNOTSUPP;
struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */
struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
- struct cifs_tcon *tcon;
+ struct smb_version_operations *ops;
if (IS_ERR(tlink))
return PTR_ERR(tlink);
- tcon = tlink_tcon(tlink);
+
+ ops = tlink_tcon(tlink)->ses->server->ops;
cifs_dbg(NOISY, "set ACL from mode for %s\n", path);
/* Get the security descriptor */
- if (tcon->ses->server->ops->get_acl == NULL) {
+ if (ops->get_acl == NULL) {
cifs_put_tlink(tlink);
return -EOPNOTSUPP;
}
- pntsd = tcon->ses->server->ops->get_acl(cifs_sb, inode, path,
- &secdesclen);
+ pntsd = ops->get_acl(cifs_sb, inode, path, &secdesclen);
if (IS_ERR(pntsd)) {
rc = PTR_ERR(pntsd);
cifs_dbg(VFS, "%s: error %d getting sec desc\n", __func__, rc);
cifs_dbg(NOISY, "build_sec_desc rc: %d\n", rc);
- if (tcon->ses->server->ops->set_acl == NULL)
+ if (ops->set_acl == NULL)
rc = -EOPNOTSUPP;
if (!rc) {
/* Set the security descriptor */
- rc = tcon->ses->server->ops->set_acl(pnntsd, secdesclen, inode,
- path, aclflag);
+ rc = ops->set_acl(pnntsd, secdesclen, inode, path, aclflag);
cifs_dbg(NOISY, "set_cifs_acl rc: %d\n", rc);
}
cifs_put_tlink(tlink);
int (*validate_negotiate)(const unsigned int, struct cifs_tcon *);
ssize_t (*query_all_EAs)(const unsigned int, struct cifs_tcon *,
const unsigned char *, const unsigned char *, char *,
- size_t, const struct nls_table *, int);
+ size_t, struct cifs_sb_info *);
int (*set_EA)(const unsigned int, struct cifs_tcon *, const char *,
const char *, const void *, const __u16,
const struct nls_table *, int);
extern ssize_t CIFSSMBQAllEAs(const unsigned int xid, struct cifs_tcon *tcon,
const unsigned char *searchName,
const unsigned char *ea_name, char *EAData,
- size_t bufsize, const struct nls_table *nls_codepage,
- int remap_special_chars);
+ size_t bufsize, struct cifs_sb_info *cifs_sb);
extern int CIFSSMBSetEA(const unsigned int xid, struct cifs_tcon *tcon,
const char *fileName, const char *ea_name,
const void *ea_value, const __u16 ea_value_len,
{
struct TCP_Server_Info *server = mid->callback_data;
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, 1, CIFS_ECHO_OP);
}
}
queue_work(cifsiod_wq, &rdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, 1, 0);
}
{
struct cifs_writedata *wdata = mid->callback_data;
struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
- struct TCP_Server_Info *server = tcon->ses->server;
unsigned int written;
WRITE_RSP *smb = (WRITE_RSP *)mid->resp_buf;
}
queue_work(cifsiod_wq, &wdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(tcon->ses->server, 1, 0);
}
CIFSSMBQAllEAs(const unsigned int xid, struct cifs_tcon *tcon,
const unsigned char *searchName, const unsigned char *ea_name,
char *EAData, size_t buf_size,
- const struct nls_table *nls_codepage, int remap)
+ struct cifs_sb_info *cifs_sb)
{
/* BB assumes one setup word */
TRANSACTION2_QPI_REQ *pSMB = NULL;
TRANSACTION2_QPI_RSP *pSMBr = NULL;
+ int remap = cifs_remap(cifs_sb);
+ struct nls_table *nls_codepage = cifs_sb->local_nls;
int rc = 0;
int bytes_returned;
int list_len;
struct cifs_tcon *tcon = tlink_tcon(cfile->tlink);
int rc = 0;
- down_read(&cinode->lock_sem);
+ down_read_nested(&cinode->lock_sem, SINGLE_DEPTH_NESTING);
if (cinode->can_cache_brlcks) {
/* can cache locks - no need to relock */
up_read(&cinode->lock_sem);
rc = tcon->ses->server->ops->query_all_EAs(xid, tcon, path,
"SETFILEBITS", ea_value, 4 /* size of buf */,
- cifs_sb->local_nls,
- cifs_remap(cifs_sb));
+ cifs_sb);
cifs_put_tlink(tlink);
if (rc < 0)
return (int)rc;
goto tcon_exit;
}
- if (rsp->ShareType & SMB2_SHARE_TYPE_DISK)
+ switch (rsp->ShareType) {
+ case SMB2_SHARE_TYPE_DISK:
cifs_dbg(FYI, "connection to disk share\n");
- else if (rsp->ShareType & SMB2_SHARE_TYPE_PIPE) {
+ break;
+ case SMB2_SHARE_TYPE_PIPE:
tcon->ipc = true;
cifs_dbg(FYI, "connection to pipe share\n");
- } else if (rsp->ShareType & SMB2_SHARE_TYPE_PRINT) {
- tcon->print = true;
+ break;
+ case SMB2_SHARE_TYPE_PRINT:
+ tcon->ipc = true;
cifs_dbg(FYI, "connection to printer\n");
- } else {
+ break;
+ default:
cifs_dbg(VFS, "unknown share type %d\n", rsp->ShareType);
rc = -EOPNOTSUPP;
goto tcon_error_exit;
if (mid->mid_state == MID_RESPONSE_RECEIVED)
credits_received = le16_to_cpu(rsp->hdr.sync_hdr.CreditRequest);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, credits_received, CIFS_ECHO_OP);
}
cifs_stats_fail_inc(tcon, SMB2_READ_HE);
queue_work(cifsiod_wq, &rdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(server, credits_received, 0);
}
{
struct cifs_writedata *wdata = mid->callback_data;
struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink);
- struct TCP_Server_Info *server = tcon->ses->server;
unsigned int written;
struct smb2_write_rsp *rsp = (struct smb2_write_rsp *)mid->resp_buf;
unsigned int credits_received = 1;
cifs_stats_fail_inc(tcon, SMB2_WRITE_HE);
queue_work(cifsiod_wq, &wdata->work);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
add_credits(tcon->ses->server, credits_received, 0);
}
now = jiffies;
/* commands taking longer than one second are indications that
something is wrong, unless it is quite a slow link or server */
- if ((now - midEntry->when_alloc) > HZ) {
+ if (time_after(now, midEntry->when_alloc + HZ)) {
if ((cifsFYI & CIFS_TIMER) && (midEntry->command != command)) {
pr_debug(" CIFS slow rsp: cmd %d mid %llu",
midEntry->command, midEntry->mid);
}
spin_unlock(&GlobalMid_Lock);
- mutex_lock(&server->srv_mutex);
DeleteMidQEntry(mid);
- mutex_unlock(&server->srv_mutex);
return rc;
}
if (pTcon->ses->server->ops->query_all_EAs)
rc = pTcon->ses->server->ops->query_all_EAs(xid, pTcon,
- full_path, name, value, size,
- cifs_sb->local_nls, cifs_remap(cifs_sb));
+ full_path, name, value, size, cifs_sb);
break;
case XATTR_CIFS_ACL: {
if (pTcon->ses->server->ops->query_all_EAs)
rc = pTcon->ses->server->ops->query_all_EAs(xid, pTcon,
- full_path, NULL, data, buf_size,
- cifs_sb->local_nls, cifs_remap(cifs_sb));
+ full_path, NULL, data, buf_size, cifs_sb);
list_ea_exit:
kfree(full_path);
free_xid(xid);
iomap->bdev = bdev;
iomap->offset = (u64)first_block << blkbits;
if (blk_queue_dax(bdev->bd_queue))
- iomap->dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
+ iomap->dax_dev = fs_dax_get_by_host(bdev->bd_disk->disk_name);
else
iomap->dax_dev = NULL;
ext2_iomap_end(struct inode *inode, loff_t offset, loff_t length,
ssize_t written, unsigned flags, struct iomap *iomap)
{
- put_dax(iomap->dax_dev);
+ fs_put_dax(iomap->dax_dev);
if (iomap->type == IOMAP_MAPPED &&
written < length &&
(flags & IOMAP_WRITE))
bdev = inode->i_sb->s_bdev;
iomap->bdev = bdev;
if (blk_queue_dax(bdev->bd_queue))
- iomap->dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
+ iomap->dax_dev = fs_dax_get_by_host(bdev->bd_disk->disk_name);
else
iomap->dax_dev = NULL;
iomap->offset = first_block << blkbits;
int blkbits = inode->i_blkbits;
bool truncate = false;
- put_dax(iomap->dax_dev);
+ fs_put_dax(iomap->dax_dev);
if (!(flags & IOMAP_WRITE) || (flags & IOMAP_FAULT))
return 0;
int err;
char *suffix = "";
- if (sb->s_bdev)
+ if (sb->s_bdev) {
suffix = "-fuseblk";
+ /*
+ * sb->s_bdi points to blkdev's bdi however we want to redirect
+ * it to our private bdi...
+ */
+ bdi_put(sb->s_bdi);
+ sb->s_bdi = &noop_backing_dev_info;
+ }
err = super_setup_bdi_name(sb, "%u:%u%s", MAJOR(fc->dev),
MINOR(fc->dev), suffix);
if (err)
/* optionally associate a dax device with the iomap bdev */
bdev = iomap->bdev;
if (blk_queue_dax(bdev->bd_queue))
- iomap->dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
+ iomap->dax_dev = fs_dax_get_by_host(bdev->bd_disk->disk_name);
else
iomap->dax_dev = NULL;
unsigned flags,
struct iomap *iomap)
{
- put_dax(iomap->dax_dev);
+ fs_put_dax(iomap->dax_dev);
if ((flags & IOMAP_WRITE) && iomap->type == IOMAP_DELALLOC)
return xfs_file_iomap_end_delalloc(XFS_I(inode), offset,
length, written, iomap);
/* either a GICv2 CPU interface */
gpa_t vgic_cpu_base;
/* or a number of GICv3 redistributor regions */
- gpa_t vgic_redist_base;
+ struct {
+ gpa_t vgic_redist_base;
+ gpa_t vgic_redist_free_offset;
+ };
};
/* distributor enabled */
*/
s64 min_value;
u64 max_value;
+ u32 min_align;
+ u32 aux_off;
+ u32 aux_off_align;
};
enum bpf_stack_slot_type {
struct bpf_prog *prog; /* eBPF program being verified */
struct bpf_verifier_stack_elem *head; /* stack of verifier states to be processed */
int stack_size; /* number of states to be processed */
+ bool strict_alignment; /* perform strict pointer alignment checks */
struct bpf_verifier_state cur_state; /* current verifier state */
struct bpf_verifier_state_list **explored_states; /* search pruning optimization */
const struct bpf_ext_analyzer_ops *analyzer_ops; /* external analyzer ops */
void **, pfn_t *);
};
+#if IS_ENABLED(CONFIG_DAX)
+struct dax_device *dax_get_by_host(const char *host);
+void put_dax(struct dax_device *dax_dev);
+#else
+static inline struct dax_device *dax_get_by_host(const char *host)
+{
+ return NULL;
+}
+
+static inline void put_dax(struct dax_device *dax_dev)
+{
+}
+#endif
+
int bdev_dax_pgoff(struct block_device *, sector_t, size_t, pgoff_t *pgoff);
#if IS_ENABLED(CONFIG_FS_DAX)
int __bdev_dax_supported(struct super_block *sb, int blocksize);
{
return __bdev_dax_supported(sb, blocksize);
}
+
+static inline struct dax_device *fs_dax_get_by_host(const char *host)
+{
+ return dax_get_by_host(host);
+}
+
+static inline void fs_put_dax(struct dax_device *dax_dev)
+{
+ put_dax(dax_dev);
+}
+
#else
static inline int bdev_dax_supported(struct super_block *sb, int blocksize)
{
return -EOPNOTSUPP;
}
-#endif
-#if IS_ENABLED(CONFIG_DAX)
-struct dax_device *dax_get_by_host(const char *host);
-void put_dax(struct dax_device *dax_dev);
-#else
-static inline struct dax_device *dax_get_by_host(const char *host)
+static inline struct dax_device *fs_dax_get_by_host(const char *host)
{
return NULL;
}
-static inline void put_dax(struct dax_device *dax_dev)
+static inline void fs_put_dax(struct dax_device *dax_dev)
{
}
#endif
int write, void __user *buffer,
size_t *length, loff_t *ppos);
#endif
+extern void wait_for_kprobe_optimizer(void);
+#else
+static inline void wait_for_kprobe_optimizer(void) { }
#endif /* CONFIG_OPTPROBES */
#ifdef CONFIG_KPROBES_ON_FTRACE
extern void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
int max_fte;
u32 level;
u32 flags;
- u32 underlay_qpn;
};
struct mlx5_flow_table *
void mlx5_fc_destroy(struct mlx5_core_dev *dev, struct mlx5_fc *counter);
void mlx5_fc_query_cached(struct mlx5_fc *counter,
u64 *bytes, u64 *packets, u64 *lastuse);
+int mlx5_fs_add_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn);
+int mlx5_fs_remove_rx_underlay_qpn(struct mlx5_core_dev *dev, u32 underlay_qpn);
+
#endif
int dev_get_phys_port_name(struct net_device *dev,
char *name, size_t len);
int dev_change_proto_down(struct net_device *dev, bool proto_down);
-int dev_change_xdp_fd(struct net_device *dev, struct netlink_ext_ack *extack,
- int fd, u32 flags);
struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev);
struct sk_buff *dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
struct netdev_queue *txq, int *ret);
+
+typedef int (*xdp_op_t)(struct net_device *dev, struct netdev_xdp *xdp);
+int dev_change_xdp_fd(struct net_device *dev, struct netlink_ext_ack *extack,
+ int fd, u32 flags);
+bool __dev_xdp_attached(struct net_device *dev, xdp_op_t xdp_op);
+
int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb);
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb);
bool is_skb_forwardable(const struct net_device *dev,
int xt_target_to_user(const struct xt_entry_target *t,
struct xt_entry_target __user *u);
int xt_data_to_user(void __user *dst, const void *src,
- int usersize, int size);
+ int usersize, int size, int aligned_size);
void *xt_copy_counters_from_user(const void __user *user, unsigned int len,
struct xt_counters_info *info, bool compat);
/* True if the target is not a standard target */
#define INVALID_TARGET (info->target < -NUM_STANDARD_TARGETS || info->target >= 0)
+static inline bool ebt_invalid_target(int target)
+{
+ return (target < -NUM_STANDARD_TARGETS || target >= 0);
+}
+
#endif
/* FC Port role bitmask - can merge with FC Port Roles in fc transport */
#define FC_PORT_ROLE_NVME_INITIATOR 0x10
-#define FC_PORT_ROLE_NVME_TARGET 0x11
-#define FC_PORT_ROLE_NVME_DISCOVERY 0x12
+#define FC_PORT_ROLE_NVME_TARGET 0x20
+#define FC_PORT_ROLE_NVME_DISCOVERY 0x40
/**
* sequence in one LLDD operation. Errors during Data
* sequence transmit must not allow RSP sequence to be sent.
*/
- NVMET_FCTGTFEAT_NEEDS_CMD_CPUSCHED = (1 << 1),
- /* Bit 1: When 0, the LLDD will deliver FCP CMD
- * on the CPU it should be affinitized to. Thus work will
- * be scheduled on the cpu received on. When 1, the LLDD
- * may not deliver the CMD on the CPU it should be worked
- * on. The transport should pick a cpu to schedule the work
- * on.
- */
- NVMET_FCTGTFEAT_CMD_IN_ISR = (1 << 2),
+ NVMET_FCTGTFEAT_CMD_IN_ISR = (1 << 1),
/* Bit 2: When 0, the LLDD is calling the cmd rcv handler
* in a non-isr context, allowing the transport to finish
* op completion in the calling context. When 1, the LLDD
* requiring the transport to transition to a workqueue
* for op completion.
*/
- NVMET_FCTGTFEAT_OPDONE_IN_ISR = (1 << 3),
+ NVMET_FCTGTFEAT_OPDONE_IN_ISR = (1 << 2),
/* Bit 3: When 0, the LLDD is calling the op done handler
* in a non-isr context, allowing the transport to finish
* op completion in the calling context. When 1, the LLDD
#include <linux/ioport.h>
#include <linux/of.h>
-typedef int const (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
+typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
/*
* Workarounds only applied to 32bit powermac machines
#ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__
#define __LINUX_SOC_RENESAS_RCAR_RST_H__
+#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \
+ defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796)
int rcar_rst_read_mode_pins(u32 *mode);
+#else
+static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }
+#endif
#endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */
unsigned rh_registered:1;/* is root hub registered? */
unsigned rh_pollable:1; /* may we poll the root hub? */
unsigned msix_enabled:1; /* driver has MSI-X enabled? */
+ unsigned msi_enabled:1; /* driver has MSI enabled? */
unsigned remove_phy:1; /* auto-remove USB phy */
/* The next flag is a stopgap, to be removed when all the HCDs
#ifndef _NF_CONNTRACK_HELPER_H
#define _NF_CONNTRACK_HELPER_H
+#include <linux/refcount.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_extend.h>
#include <net/netfilter/nf_conntrack_expect.h>
struct hlist_node hnode; /* Internal use. */
char name[NF_CT_HELPER_NAME_LEN]; /* name of the module */
+ refcount_t refcnt;
struct module *me; /* pointer to self */
const struct nf_conntrack_expect_policy *expect_policy;
struct nf_conntrack_helper *nf_conntrack_helper_try_module_get(const char *name,
u16 l3num,
u8 protonum);
+void nf_conntrack_helper_put(struct nf_conntrack_helper *helper);
+
void nf_ct_helper_init(struct nf_conntrack_helper *helper,
u16 l3num, u16 protonum, const char *name,
u16 default_port, u16 spec_port, u32 id,
int nft_data_init(const struct nft_ctx *ctx,
struct nft_data *data, unsigned int size,
struct nft_data_desc *desc, const struct nlattr *nla);
-void nft_data_uninit(const struct nft_data *data, enum nft_data_types type);
+void nft_data_release(const struct nft_data *data, enum nft_data_types type);
int nft_data_dump(struct sk_buff *skb, int attr, const struct nft_data *data,
enum nft_data_types type, unsigned int len);
/* sysctl_net_x25.c */
#ifdef CONFIG_SYSCTL
-void x25_register_sysctl(void);
+int x25_register_sysctl(void);
void x25_unregister_sysctl(void);
#else
-static inline void x25_register_sysctl(void) {};
+static inline int x25_register_sysctl(void) { return 0; };
static inline void x25_unregister_sysctl(void) {};
#endif /* CONFIG_SYSCTL */
*/
#define BPF_F_ALLOW_OVERRIDE (1U << 0)
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT (1U << 0)
+
#define BPF_PSEUDO_MAP_FD 1
/* flags for BPF_MAP_UPDATE_ELEM command */
__u32 log_size; /* size of user buffer */
__aligned_u64 log_buf; /* user supplied buffer */
__u32 kern_version; /* checked when prog_type=kprobe */
+ __u32 prog_flags;
};
struct { /* anonymous struct used by BPF_OBJ_* commands */
/* XDP section */
#define XDP_FLAGS_UPDATE_IF_NOEXIST (1U << 0)
-#define XDP_FLAGS_SKB_MODE (2U << 0)
+#define XDP_FLAGS_SKB_MODE (1U << 1)
+#define XDP_FLAGS_DRV_MODE (1U << 2)
#define XDP_FLAGS_MASK (XDP_FLAGS_UPDATE_IF_NOEXIST | \
- XDP_FLAGS_SKB_MODE)
+ XDP_FLAGS_SKB_MODE | \
+ XDP_FLAGS_DRV_MODE)
+
+/* These are stored into IFLA_XDP_ATTACHED on dump. */
+enum {
+ XDP_ATTACHED_NONE = 0,
+ XDP_ATTACHED_DRV,
+ XDP_ATTACHED_SKB,
+};
enum {
IFLA_XDP_UNSPEC,
*/
#define USB_MAXCHILDREN 31
+/* See USB 3.1 spec Table 10-5 */
+#define USB_SS_MAXPORTS 15
+
/*
* Hub request types
*/
EXPORT_SYMBOL_GPL(bpf_prog_get_type);
/* last field in 'union bpf_attr' used by this command */
-#define BPF_PROG_LOAD_LAST_FIELD kern_version
+#define BPF_PROG_LOAD_LAST_FIELD prog_flags
static int bpf_prog_load(union bpf_attr *attr)
{
if (CHECK_ATTR(BPF_PROG_LOAD))
return -EINVAL;
+ if (attr->prog_flags & ~BPF_F_STRICT_ALIGNMENT)
+ return -EINVAL;
+
/* copy eBPF program license from user space */
if (strncpy_from_user(license, u64_to_user_ptr(attr->license),
sizeof(license) - 1) < 0)
struct bpf_verifier_stack_elem *next;
};
-#define BPF_COMPLEXITY_LIMIT_INSNS 65536
+#define BPF_COMPLEXITY_LIMIT_INSNS 98304
#define BPF_COMPLEXITY_LIMIT_STACK 1024
#define BPF_MAP_PTR_POISON ((void *)0xeB9F + POISON_POINTER_DELTA)
if (reg->max_value != BPF_REGISTER_MAX_RANGE)
verbose(",max_value=%llu",
(unsigned long long)reg->max_value);
+ if (reg->min_align)
+ verbose(",min_align=%u", reg->min_align);
+ if (reg->aux_off)
+ verbose(",aux_off=%u", reg->aux_off);
+ if (reg->aux_off_align)
+ verbose(",aux_off_align=%u", reg->aux_off_align);
}
for (i = 0; i < MAX_BPF_STACK; i += BPF_REG_SIZE) {
if (state->stack_slot_type[i] == STACK_SPILL)
regs[i].imm = 0;
regs[i].min_value = BPF_REGISTER_MIN_RANGE;
regs[i].max_value = BPF_REGISTER_MAX_RANGE;
+ regs[i].min_align = 0;
+ regs[i].aux_off = 0;
+ regs[i].aux_off_align = 0;
}
/* frame pointer */
{
regs[regno].min_value = BPF_REGISTER_MIN_RANGE;
regs[regno].max_value = BPF_REGISTER_MAX_RANGE;
+ regs[regno].min_align = 0;
}
static void mark_reg_unknown_value_and_range(struct bpf_reg_state *regs,
}
static int check_pkt_ptr_alignment(const struct bpf_reg_state *reg,
- int off, int size)
+ int off, int size, bool strict)
{
- if (reg->id && size != 1) {
- verbose("Unknown alignment. Only byte-sized access allowed in packet access.\n");
- return -EACCES;
+ int ip_align;
+ int reg_off;
+
+ /* Byte size accesses are always allowed. */
+ if (!strict || size == 1)
+ return 0;
+
+ reg_off = reg->off;
+ if (reg->id) {
+ if (reg->aux_off_align % size) {
+ verbose("Packet access is only %u byte aligned, %d byte access not allowed\n",
+ reg->aux_off_align, size);
+ return -EACCES;
+ }
+ reg_off += reg->aux_off;
}
- /* skb->data is NET_IP_ALIGN-ed */
- if ((NET_IP_ALIGN + reg->off + off) % size != 0) {
+ /* For platforms that do not have a Kconfig enabling
+ * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS the value of
+ * NET_IP_ALIGN is universally set to '2'. And on platforms
+ * that do set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, we get
+ * to this code only in strict mode where we want to emulate
+ * the NET_IP_ALIGN==2 checking. Therefore use an
+ * unconditional IP align value of '2'.
+ */
+ ip_align = 2;
+ if ((ip_align + reg_off + off) % size != 0) {
verbose("misaligned packet access off %d+%d+%d size %d\n",
- NET_IP_ALIGN, reg->off, off, size);
+ ip_align, reg_off, off, size);
return -EACCES;
}
}
static int check_val_ptr_alignment(const struct bpf_reg_state *reg,
- int size)
+ int size, bool strict)
{
- if (size != 1) {
+ if (strict && size != 1) {
verbose("Unknown alignment. Only byte-sized access allowed in value access.\n");
return -EACCES;
}
return 0;
}
-static int check_ptr_alignment(const struct bpf_reg_state *reg,
+static int check_ptr_alignment(struct bpf_verifier_env *env,
+ const struct bpf_reg_state *reg,
int off, int size)
{
+ bool strict = env->strict_alignment;
+
+ if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
+ strict = true;
+
switch (reg->type) {
case PTR_TO_PACKET:
- return IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) ? 0 :
- check_pkt_ptr_alignment(reg, off, size);
+ return check_pkt_ptr_alignment(reg, off, size, strict);
case PTR_TO_MAP_VALUE_ADJ:
- return IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) ? 0 :
- check_val_ptr_alignment(reg, size);
+ return check_val_ptr_alignment(reg, size, strict);
default:
if (off % size != 0) {
verbose("misaligned access off %d size %d\n",
if (size < 0)
return size;
- err = check_ptr_alignment(reg, off, size);
+ err = check_ptr_alignment(env, reg, off, size);
if (err)
return err;
value_regno);
/* note that reg.[id|off|range] == 0 */
state->regs[value_regno].type = reg_type;
+ state->regs[value_regno].aux_off = 0;
+ state->regs[value_regno].aux_off_align = 0;
}
} else if (reg->type == FRAME_PTR || reg->type == PTR_TO_STACK) {
*/
dst_reg->off += imm;
} else {
+ bool had_id;
+
if (src_reg->type == PTR_TO_PACKET) {
/* R6=pkt(id=0,off=0,r=62) R7=imm22; r7 += r6 */
tmp_reg = *dst_reg; /* save r7 state */
src_reg->imm);
return -EACCES;
}
+
+ had_id = (dst_reg->id != 0);
+
/* dst_reg stays as pkt_ptr type and since some positive
* integer value was added to the pointer, increment its 'id'
*/
dst_reg->id = ++env->id_gen;
- /* something was added to pkt_ptr, set range and off to zero */
+ /* something was added to pkt_ptr, set range to zero */
+ dst_reg->aux_off += dst_reg->off;
dst_reg->off = 0;
dst_reg->range = 0;
+ if (had_id)
+ dst_reg->aux_off_align = min(dst_reg->aux_off_align,
+ src_reg->min_align);
+ else
+ dst_reg->aux_off_align = src_reg->min_align;
}
return 0;
}
reg->min_value = BPF_REGISTER_MIN_RANGE;
}
+static u32 calc_align(u32 imm)
+{
+ if (!imm)
+ return 1U << 31;
+ return imm - ((imm - 1) & imm);
+}
+
static void adjust_reg_min_max_vals(struct bpf_verifier_env *env,
struct bpf_insn *insn)
{
s64 min_val = BPF_REGISTER_MIN_RANGE;
u64 max_val = BPF_REGISTER_MAX_RANGE;
u8 opcode = BPF_OP(insn->code);
+ u32 dst_align, src_align;
dst_reg = ®s[insn->dst_reg];
+ src_align = 0;
if (BPF_SRC(insn->code) == BPF_X) {
check_reg_overflow(®s[insn->src_reg]);
min_val = regs[insn->src_reg].min_value;
regs[insn->src_reg].type != UNKNOWN_VALUE) {
min_val = BPF_REGISTER_MIN_RANGE;
max_val = BPF_REGISTER_MAX_RANGE;
+ src_align = 0;
+ } else {
+ src_align = regs[insn->src_reg].min_align;
}
} else if (insn->imm < BPF_REGISTER_MAX_RANGE &&
(s64)insn->imm > BPF_REGISTER_MIN_RANGE) {
min_val = max_val = insn->imm;
+ src_align = calc_align(insn->imm);
}
+ dst_align = dst_reg->min_align;
+
/* We don't know anything about what was done to this register, mark it
* as unknown.
*/
dst_reg->min_value += min_val;
if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
dst_reg->max_value += max_val;
+ dst_reg->min_align = min(src_align, dst_align);
break;
case BPF_SUB:
if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE)
dst_reg->min_value -= min_val;
if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
dst_reg->max_value -= max_val;
+ dst_reg->min_align = min(src_align, dst_align);
break;
case BPF_MUL:
if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE)
dst_reg->min_value *= min_val;
if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
dst_reg->max_value *= max_val;
+ dst_reg->min_align = max(src_align, dst_align);
break;
case BPF_AND:
/* Disallow AND'ing of negative numbers, ain't nobody got time
else
dst_reg->min_value = 0;
dst_reg->max_value = max_val;
+ dst_reg->min_align = max(src_align, dst_align);
break;
case BPF_LSH:
/* Gotta have special overflow logic here, if we're shifting
* more than MAX_RANGE then just assume we have an invalid
* range.
*/
- if (min_val > ilog2(BPF_REGISTER_MAX_RANGE))
+ if (min_val > ilog2(BPF_REGISTER_MAX_RANGE)) {
dst_reg->min_value = BPF_REGISTER_MIN_RANGE;
- else if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE)
- dst_reg->min_value <<= min_val;
-
+ dst_reg->min_align = 1;
+ } else {
+ if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE)
+ dst_reg->min_value <<= min_val;
+ if (!dst_reg->min_align)
+ dst_reg->min_align = 1;
+ dst_reg->min_align <<= min_val;
+ }
if (max_val > ilog2(BPF_REGISTER_MAX_RANGE))
dst_reg->max_value = BPF_REGISTER_MAX_RANGE;
else if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
/* RSH by a negative number is undefined, and the BPF_RSH is an
* unsigned shift, so make the appropriate casts.
*/
- if (min_val < 0 || dst_reg->min_value < 0)
+ if (min_val < 0 || dst_reg->min_value < 0) {
dst_reg->min_value = BPF_REGISTER_MIN_RANGE;
- else
+ } else {
dst_reg->min_value =
(u64)(dst_reg->min_value) >> min_val;
+ }
+ if (min_val < 0) {
+ dst_reg->min_align = 1;
+ } else {
+ dst_reg->min_align >>= (u64) min_val;
+ if (!dst_reg->min_align)
+ dst_reg->min_align = 1;
+ }
if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE)
dst_reg->max_value >>= max_val;
break;
regs[insn->dst_reg].imm = insn->imm;
regs[insn->dst_reg].max_value = insn->imm;
regs[insn->dst_reg].min_value = insn->imm;
+ regs[insn->dst_reg].min_align = calc_align(insn->imm);
}
} else if (opcode > BPF_END) {
env->explored_states[t + 1] = STATE_LIST_MARK;
} else {
/* conditional jump with two edges */
+ env->explored_states[t] = STATE_LIST_MARK;
ret = push_insn(t, t + 1, FALLTHROUGH, env);
if (ret == 1)
goto peek_stack;
rcur->type != NOT_INIT))
continue;
+ /* Don't care about the reg->id in this case. */
+ if (rold->type == PTR_TO_MAP_VALUE_OR_NULL &&
+ rcur->type == PTR_TO_MAP_VALUE_OR_NULL &&
+ rold->map_ptr == rcur->map_ptr)
+ continue;
+
if (rold->type == PTR_TO_PACKET && rcur->type == PTR_TO_PACKET &&
compare_ptrs_to_packet(rold, rcur))
continue;
goto process_bpf_exit;
}
- if (log_level && do_print_state) {
- verbose("\nfrom %d to %d:", prev_insn_idx, insn_idx);
+ if (need_resched())
+ cond_resched();
+
+ if (log_level > 1 || (log_level && do_print_state)) {
+ if (log_level > 1)
+ verbose("%d:", insn_idx);
+ else
+ verbose("\nfrom %d to %d:",
+ prev_insn_idx, insn_idx);
print_verifier_state(&env->cur_state);
do_print_state = false;
}
} else {
log_level = 0;
}
+ if (attr->prog_flags & BPF_F_STRICT_ALIGNMENT)
+ env->strict_alignment = true;
+ else
+ env->strict_alignment = false;
ret = replace_map_fd_with_map_ptr(env);
if (ret < 0)
mutex_lock(&bpf_verifier_lock);
log_level = 0;
+ env->strict_alignment = false;
env->explored_states = kcalloc(env->prog->len,
sizeof(struct bpf_verifier_state_list *),
*/
recalc_sigpending();
if (signal_pending(current)) {
- spin_unlock(¤t->sighand->siglock);
- write_unlock_irq(&tasklist_lock);
retval = -ERESTARTNOINTR;
goto bad_fork_cancel_cgroup;
}
+ if (unlikely(!(ns_of_pid(pid)->nr_hashed & PIDNS_HASH_ADDING))) {
+ retval = -ENOMEM;
+ goto bad_fork_cancel_cgroup;
+ }
if (likely(p->pid)) {
ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace);
return p;
bad_fork_cancel_cgroup:
+ spin_unlock(¤t->sighand->siglock);
+ write_unlock_irq(&tasklist_lock);
cgroup_cancel_fork(p);
bad_fork_free_pid:
cgroup_threadgroup_change_end(current);
if (!desc)
return;
- __irq_do_set_handler(desc, handle, 1, NULL);
desc->irq_common_data.handler_data = data;
+ __irq_do_set_handler(desc, handle, 1, NULL);
irq_put_desc_busunlock(desc, flags);
}
}
/* Wait for completing optimization and unoptimization */
-static void wait_for_kprobe_optimizer(void)
+void wait_for_kprobe_optimizer(void)
{
mutex_lock(&kprobe_mutex);
* The vaddr this probe is installed will soon
* be vfreed buy not synced to disk. Hence,
* disarming the breakpoint isn't needed.
+ *
+ * Note, this will also move any optimized probes
+ * that are pending to be removed from their
+ * corresponding lists to the freeing_list and
+ * will not be touched by the delayed
+ * kprobe_optimizer work handler.
*/
kill_kprobe(p);
}
* if reparented.
*/
for (;;) {
- set_current_state(TASK_UNINTERRUPTIBLE);
+ set_current_state(TASK_INTERRUPTIBLE);
if (pid_ns->nr_hashed == init_pids)
break;
schedule();
* Numbers of normal and highmem page frames allocated for hibernation image
* before suspending devices.
*/
-unsigned int alloc_normal, alloc_highmem;
+static unsigned int alloc_normal, alloc_highmem;
/*
* Memory bitmap used for marking saveable pages (during hibernation) or
* hibernation image pages (during restore)
sugov_update_commit(sg_policy, time, next_f);
}
-static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu)
+static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu, u64 time)
{
struct sugov_policy *sg_policy = sg_cpu->sg_policy;
struct cpufreq_policy *policy = sg_policy->policy;
- u64 last_freq_update_time = sg_policy->last_freq_update_time;
unsigned long util = 0, max = 1;
unsigned int j;
* enough, don't take the CPU into account as it probably is
* idle now (and clear iowait_boost for it).
*/
- delta_ns = last_freq_update_time - j_sg_cpu->last_update;
+ delta_ns = time - j_sg_cpu->last_update;
if (delta_ns > TICK_NSEC) {
j_sg_cpu->iowait_boost = 0;
continue;
if (flags & SCHED_CPUFREQ_RT_DL)
next_f = sg_policy->policy->cpuinfo.max_freq;
else
- next_f = sugov_next_freq_shared(sg_cpu);
+ next_f = sugov_next_freq_shared(sg_cpu, time);
sugov_update_commit(sg_policy, time, next_f);
}
goto out;
if (attr == &dev_attr_act_mask) {
- if (sscanf(buf, "%llx", &value) != 1) {
+ if (kstrtoull(buf, 0, &value)) {
/* Assume it is a list of trace category names */
ret = blk_trace_str2mask(buf);
if (ret < 0)
goto out;
value = ret;
}
- } else if (sscanf(buf, "%llu", &value) != 1)
+ } else if (kstrtoull(buf, 0, &value))
goto out;
ret = -ENXIO;
int i, ret = -ENODEV;
int size;
- if (glob && (strcmp(glob, "*") == 0 || !strlen(glob)))
+ if (!glob || !strlen(glob) || !strcmp(glob, "*"))
func_g.search = NULL;
- else if (glob) {
+ else {
int not;
func_g.type = filter_parse_regex(glob, strlen(glob),
return ret;
}
+void clear_ftrace_function_probes(struct trace_array *tr)
+{
+ struct ftrace_func_probe *probe, *n;
+
+ list_for_each_entry_safe(probe, n, &tr->func_probes, list)
+ unregister_ftrace_function_probe_func(NULL, tr, probe->probe_ops);
+}
+
static LIST_HEAD(ftrace_commands);
static DEFINE_MUTEX(ftrace_cmd_mutex);
return 0;
}
-early_initcall(init_trace_selftests);
+core_initcall(init_trace_selftests);
#else
static inline int run_tracer_selftest(struct tracer *type)
{
void __trace_stack(struct trace_array *tr, unsigned long flags, int skip,
int pc)
{
- __ftrace_trace_stack(tr->trace_buffer.buffer, flags, skip, pc, NULL);
+ struct ring_buffer *buffer = tr->trace_buffer.buffer;
+
+ if (rcu_is_watching()) {
+ __ftrace_trace_stack(buffer, flags, skip, pc, NULL);
+ return;
+ }
+
+ /*
+ * When an NMI triggers, RCU is enabled via rcu_nmi_enter(),
+ * but if the above rcu_is_watching() failed, then the NMI
+ * triggered someplace critical, and rcu_irq_enter() should
+ * not be called from NMI.
+ */
+ if (unlikely(in_nmi()))
+ return;
+
+ /*
+ * It is possible that a function is being traced in a
+ * location that RCU is not watching. A call to
+ * rcu_irq_enter() will make sure that it is, but there's
+ * a few internal rcu functions that could be traced
+ * where that wont work either. In those cases, we just
+ * do nothing.
+ */
+ if (unlikely(rcu_irq_enter_disabled()))
+ return;
+
+ rcu_irq_enter_irqson();
+ __ftrace_trace_stack(buffer, flags, skip, pc, NULL);
+ rcu_irq_exit_irqson();
}
/**
}
tracing_set_nop(tr);
+ clear_ftrace_function_probes(tr);
event_trace_del_tracer(tr);
ftrace_clear_pids(tr);
ftrace_destroy_function_files(tr);
extern int
unregister_ftrace_function_probe_func(char *glob, struct trace_array *tr,
struct ftrace_probe_ops *ops);
+extern void clear_ftrace_function_probes(struct trace_array *tr);
int register_ftrace_command(struct ftrace_func_command *cmd);
int unregister_ftrace_command(struct ftrace_func_command *cmd);
{
return -EINVAL;
}
+static inline void clear_ftrace_function_probes(struct trace_array *tr)
+{
+}
+
/*
* The ops parameter passed in is usually undefined.
* This must be a macro.
end:
release_all_trace_kprobes();
+ /*
+ * Wait for the optimizer work to finish. Otherwise it might fiddle
+ * with probes in already freed __init text.
+ */
+ wait_for_kprobe_optimizer();
if (warn)
pr_cont("NG: Some tests are failed. Please check them.\n");
else
goto error_xenbus;
}
priv->tag = xenbus_read(xbt, dev->nodename, "tag", NULL);
- if (!priv->tag) {
- ret = -EINVAL;
+ if (IS_ERR(priv->tag)) {
+ ret = PTR_ERR(priv->tag);
goto error_xenbus;
}
ret = xenbus_transaction_end(xbt, 0);
.otherend_changed = xen_9pfs_front_changed,
};
-int p9_trans_xen_init(void)
+static int p9_trans_xen_init(void)
{
if (!xen_domain())
return -ENODEV;
}
module_init(p9_trans_xen_init);
-void p9_trans_xen_exit(void)
+static void p9_trans_xen_exit(void)
{
v9fs_unregister_trans(&p9_xen_trans);
return xenbus_unregister_driver(&xen_9pfs_front_driver);
return -EPROTONOSUPPORT;
}
}
+
+ if (data[IFLA_BR_VLAN_DEFAULT_PVID]) {
+ __u16 defpvid = nla_get_u16(data[IFLA_BR_VLAN_DEFAULT_PVID]);
+
+ if (defpvid >= VLAN_VID_MASK)
+ return -EINVAL;
+ }
#endif
return 0;
br_debug(br, "using kernel STP\n");
/* To start timers on any ports left in blocking */
+ mod_timer(&br->hello_timer, jiffies + br->hello_time);
br_port_state_selection(br);
}
if (br->dev->flags & IFF_UP) {
br_config_bpdu_generation(br);
- if (br->stp_enabled != BR_USER_STP)
+ if (br->stp_enabled == BR_KERNEL_STP)
mod_timer(&br->hello_timer,
round_jiffies(jiffies + br->hello_time));
}
if (e->ethproto != htons(ETH_P_ARP) ||
e->invflags & EBT_IPROTO)
return -EINVAL;
+ if (ebt_invalid_target(info->target))
+ return -EINVAL;
+
return 0;
}
strlcpy(name, _name, sizeof(name));
if (copy_to_user(um, name, EBT_FUNCTION_MAXNAMELEN) ||
put_user(datasize, (int __user *)(um + EBT_FUNCTION_MAXNAMELEN)) ||
- xt_data_to_user(um + entrysize, data, usersize, datasize))
+ xt_data_to_user(um + entrysize, data, usersize, datasize,
+ XT_ALIGN(datasize)))
return -EFAULT;
return 0;
if (match->compat_to_user(cm->data, m->data))
return -EFAULT;
} else {
- if (xt_data_to_user(cm->data, m->data, match->usersize, msize))
+ if (xt_data_to_user(cm->data, m->data, match->usersize, msize,
+ COMPAT_XT_ALIGN(msize)))
return -EFAULT;
}
if (target->compat_to_user(cm->data, t->data))
return -EFAULT;
} else {
- if (xt_data_to_user(cm->data, t->data, target->usersize, tsize))
+ if (xt_data_to_user(cm->data, t->data, target->usersize, tsize,
+ COMPAT_XT_ALIGN(tsize)))
return -EFAULT;
}
}
EXPORT_SYMBOL(dev_change_proto_down);
+bool __dev_xdp_attached(struct net_device *dev, xdp_op_t xdp_op)
+{
+ struct netdev_xdp xdp;
+
+ memset(&xdp, 0, sizeof(xdp));
+ xdp.command = XDP_QUERY_PROG;
+
+ /* Query must always succeed. */
+ WARN_ON(xdp_op(dev, &xdp) < 0);
+ return xdp.prog_attached;
+}
+
+static int dev_xdp_install(struct net_device *dev, xdp_op_t xdp_op,
+ struct netlink_ext_ack *extack,
+ struct bpf_prog *prog)
+{
+ struct netdev_xdp xdp;
+
+ memset(&xdp, 0, sizeof(xdp));
+ xdp.command = XDP_SETUP_PROG;
+ xdp.extack = extack;
+ xdp.prog = prog;
+
+ return xdp_op(dev, &xdp);
+}
+
/**
* dev_change_xdp_fd - set or clear a bpf program for a device rx path
* @dev: device
int dev_change_xdp_fd(struct net_device *dev, struct netlink_ext_ack *extack,
int fd, u32 flags)
{
- int (*xdp_op)(struct net_device *dev, struct netdev_xdp *xdp);
const struct net_device_ops *ops = dev->netdev_ops;
struct bpf_prog *prog = NULL;
- struct netdev_xdp xdp;
+ xdp_op_t xdp_op, xdp_chk;
int err;
ASSERT_RTNL();
- xdp_op = ops->ndo_xdp;
+ xdp_op = xdp_chk = ops->ndo_xdp;
+ if (!xdp_op && (flags & XDP_FLAGS_DRV_MODE))
+ return -EOPNOTSUPP;
if (!xdp_op || (flags & XDP_FLAGS_SKB_MODE))
xdp_op = generic_xdp_install;
+ if (xdp_op == xdp_chk)
+ xdp_chk = generic_xdp_install;
if (fd >= 0) {
- if (flags & XDP_FLAGS_UPDATE_IF_NOEXIST) {
- memset(&xdp, 0, sizeof(xdp));
- xdp.command = XDP_QUERY_PROG;
-
- err = xdp_op(dev, &xdp);
- if (err < 0)
- return err;
- if (xdp.prog_attached)
- return -EBUSY;
- }
+ if (xdp_chk && __dev_xdp_attached(dev, xdp_chk))
+ return -EEXIST;
+ if ((flags & XDP_FLAGS_UPDATE_IF_NOEXIST) &&
+ __dev_xdp_attached(dev, xdp_op))
+ return -EBUSY;
prog = bpf_prog_get_type(fd, BPF_PROG_TYPE_XDP);
if (IS_ERR(prog))
return PTR_ERR(prog);
}
- memset(&xdp, 0, sizeof(xdp));
- xdp.command = XDP_SETUP_PROG;
- xdp.extack = extack;
- xdp.prog = prog;
-
- err = xdp_op(dev, &xdp);
+ err = dev_xdp_install(dev, xdp_op, extack, prog);
if (err < 0 && prog)
bpf_prog_put(prog);
lladdr = neigh->ha;
}
- if (new & NUD_CONNECTED)
- neigh->confirmed = jiffies;
- neigh->updated = jiffies;
-
/* If entry was valid and address is not changed,
do not change entry state, if new one is STALE.
*/
}
}
+ /* Update timestamps only once we know we will make a change to the
+ * neighbour entry. Otherwise we risk to move the locktime window with
+ * noop updates and ignore relevant ARP updates.
+ */
+ if (new != old || lladdr != neigh->ha) {
+ if (new & NUD_CONNECTED)
+ neigh->confirmed = jiffies;
+ neigh->updated = jiffies;
+ }
+
if (new != old) {
neigh_del_timer(neigh);
if (new & NUD_PROBE)
static size_t rtnl_xdp_size(void)
{
size_t xdp_size = nla_total_size(0) + /* nest IFLA_XDP */
- nla_total_size(1) + /* XDP_ATTACHED */
- nla_total_size(4); /* XDP_FLAGS */
+ nla_total_size(1); /* XDP_ATTACHED */
return xdp_size;
}
return 0;
}
+static u8 rtnl_xdp_attached_mode(struct net_device *dev)
+{
+ const struct net_device_ops *ops = dev->netdev_ops;
+
+ ASSERT_RTNL();
+
+ if (rcu_access_pointer(dev->xdp_prog))
+ return XDP_ATTACHED_SKB;
+ if (ops->ndo_xdp && __dev_xdp_attached(dev, ops->ndo_xdp))
+ return XDP_ATTACHED_DRV;
+
+ return XDP_ATTACHED_NONE;
+}
+
static int rtnl_xdp_fill(struct sk_buff *skb, struct net_device *dev)
{
struct nlattr *xdp;
- u32 xdp_flags = 0;
- u8 val = 0;
int err;
xdp = nla_nest_start(skb, IFLA_XDP);
if (!xdp)
return -EMSGSIZE;
- if (rcu_access_pointer(dev->xdp_prog)) {
- xdp_flags = XDP_FLAGS_SKB_MODE;
- val = 1;
- } else if (dev->netdev_ops->ndo_xdp) {
- struct netdev_xdp xdp_op = {};
-
- xdp_op.command = XDP_QUERY_PROG;
- err = dev->netdev_ops->ndo_xdp(dev, &xdp_op);
- if (err)
- goto err_cancel;
- val = xdp_op.prog_attached;
- }
- err = nla_put_u8(skb, IFLA_XDP_ATTACHED, val);
+
+ err = nla_put_u8(skb, IFLA_XDP_ATTACHED,
+ rtnl_xdp_attached_mode(dev));
if (err)
goto err_cancel;
- if (xdp_flags) {
- err = nla_put_u32(skb, IFLA_XDP_FLAGS, xdp_flags);
- if (err)
- goto err_cancel;
- }
nla_nest_end(skb, xdp);
return 0;
cb->nlh->nlmsg_seq, 0,
flags,
ext_filter_mask);
- /* If we ran out of room on the first message,
- * we're in trouble
- */
- WARN_ON((err == -EMSGSIZE) && (skb->len == 0));
- if (err < 0)
- goto out;
+ if (err < 0) {
+ if (likely(skb->len))
+ goto out;
+
+ goto out_err;
+ }
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
cont:
}
}
out:
+ err = skb->len;
+out_err:
cb->args[1] = idx;
cb->args[0] = h;
- return skb->len;
+ return err;
}
int rtnl_nla_parse_ifla(struct nlattr **tb, const struct nlattr *head, int len,
err = -EINVAL;
goto errout;
}
+ if ((xdp_flags & XDP_FLAGS_SKB_MODE) &&
+ (xdp_flags & XDP_FLAGS_DRV_MODE)) {
+ err = -EINVAL;
+ goto errout;
+ }
}
if (xdp[IFLA_XDP_FD]) {
err = br_dev->netdev_ops->ndo_bridge_getlink(
skb, portid, seq, dev,
filter_mask, NLM_F_MULTI);
- if (err < 0 && err != -EOPNOTSUPP)
- break;
+ if (err < 0 && err != -EOPNOTSUPP) {
+ if (likely(skb->len))
+ break;
+
+ goto out_err;
+ }
}
idx++;
}
seq, dev,
filter_mask,
NLM_F_MULTI);
- if (err < 0 && err != -EOPNOTSUPP)
- break;
+ if (err < 0 && err != -EOPNOTSUPP) {
+ if (likely(skb->len))
+ break;
+
+ goto out_err;
+ }
}
idx++;
}
}
+ err = skb->len;
+out_err:
rcu_read_unlock();
cb->args[0] = idx;
- return skb->len;
+ return err;
}
static inline size_t bridge_nlmsg_size(void)
#include <trace/events/sock.h>
-#ifdef CONFIG_INET
#include <net/tcp.h>
-#endif
-
#include <net/busy_poll.h>
static DEFINE_MUTEX(proto_list_mutex);
* delay queue. We want to allow the owner socket to send more
* packets, as if they were already TX completed by a typical driver.
* But we also want to keep skb->sk set because some packet schedulers
- * rely on it (sch_fq for example). So we set skb->truesize to a small
- * amount (1) and decrease sk_wmem_alloc accordingly.
+ * rely on it (sch_fq for example).
*/
void skb_orphan_partial(struct sk_buff *skb)
{
- /* If this skb is a TCP pure ACK or already went here,
- * we have nothing to do. 2 is already a very small truesize.
- */
- if (skb->truesize <= 2)
+ if (skb_is_tcp_pure_ack(skb))
return;
- /* TCP stack sets skb->ooo_okay based on sk_wmem_alloc,
- * so we do not completely orphan skb, but transfert all
- * accounted bytes but one, to avoid unexpected reorders.
- */
if (skb->destructor == sock_wfree
#ifdef CONFIG_INET
|| skb->destructor == tcp_wfree
#endif
) {
- atomic_sub(skb->truesize - 1, &skb->sk->sk_wmem_alloc);
- skb->truesize = 1;
+ struct sock *sk = skb->sk;
+
+ if (atomic_inc_not_zero(&sk->sk_refcnt)) {
+ atomic_sub(skb->truesize, &sk->sk_wmem_alloc);
+ skb->destructor = sock_efree;
+ }
} else {
skb_orphan(skb);
}
newsk->sk_backlog_rcv = dccp_v4_do_rcv;
newnp->pktoptions = NULL;
newnp->opt = NULL;
+ newnp->ipv6_mc_list = NULL;
+ newnp->ipv6_ac_list = NULL;
+ newnp->ipv6_fl_list = NULL;
newnp->mcast_oif = inet6_iif(skb);
newnp->mcast_hops = ipv6_hdr(skb)->hop_limit;
/* Clone RX bits */
newnp->rxopt.all = np->rxopt.all;
+ newnp->ipv6_mc_list = NULL;
+ newnp->ipv6_ac_list = NULL;
+ newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = inet6_iif(skb);
}
EXPORT_SYMBOL(arp_xmit);
+static bool arp_is_garp(struct net *net, struct net_device *dev,
+ int *addr_type, __be16 ar_op,
+ __be32 sip, __be32 tip,
+ unsigned char *sha, unsigned char *tha)
+{
+ bool is_garp = tip == sip;
+
+ /* Gratuitous ARP _replies_ also require target hwaddr to be
+ * the same as source.
+ */
+ if (is_garp && ar_op == htons(ARPOP_REPLY))
+ is_garp =
+ /* IPv4 over IEEE 1394 doesn't provide target
+ * hardware address field in its ARP payload.
+ */
+ tha &&
+ !memcmp(tha, sha, dev->addr_len);
+
+ if (is_garp) {
+ *addr_type = inet_addr_type_dev_table(net, dev, sip);
+ if (*addr_type != RTN_UNICAST)
+ is_garp = false;
+ }
+ return is_garp;
+}
+
/*
* Process an arp request.
*/
unsigned char *arp_ptr;
struct rtable *rt;
unsigned char *sha;
+ unsigned char *tha = NULL;
__be32 sip, tip;
u16 dev_type = dev->type;
int addr_type;
break;
#endif
default:
+ tha = arp_ptr;
arp_ptr += dev->addr_len;
}
memcpy(&tip, arp_ptr, 4);
n = __neigh_lookup(&arp_tbl, &sip, dev, 0);
- if (IN_DEV_ARP_ACCEPT(in_dev)) {
- unsigned int addr_type = inet_addr_type_dev_table(net, dev, sip);
+ if (n || IN_DEV_ARP_ACCEPT(in_dev)) {
+ addr_type = -1;
+ is_garp = arp_is_garp(net, dev, &addr_type, arp->ar_op,
+ sip, tip, sha, tha);
+ }
+ if (IN_DEV_ARP_ACCEPT(in_dev)) {
/* Unsolicited ARP is not accepted by default.
It is possible, that this option should be enabled for some
devices (strip is candidate)
*/
- is_garp = arp->ar_op == htons(ARPOP_REQUEST) && tip == sip &&
- addr_type == RTN_UNICAST;
-
if (!n &&
- ((arp->ar_op == htons(ARPOP_REPLY) &&
- addr_type == RTN_UNICAST) || is_garp))
+ (is_garp ||
+ (arp->ar_op == htons(ARPOP_REPLY) &&
+ (addr_type == RTN_UNICAST ||
+ (addr_type < 0 &&
+ /* postpone calculation to as late as possible */
+ inet_addr_type_dev_table(net, dev, sip) ==
+ RTN_UNICAST)))))
n = __neigh_lookup(&arp_tbl, &sip, dev, 1);
}
unsigned int e = 0, s_e;
struct fib_table *tb;
struct hlist_head *head;
- int dumped = 0;
+ int dumped = 0, err;
if (nlmsg_len(cb->nlh) >= sizeof(struct rtmsg) &&
((struct rtmsg *) nlmsg_data(cb->nlh))->rtm_flags & RTM_F_CLONED)
if (dumped)
memset(&cb->args[2], 0, sizeof(cb->args) -
2 * sizeof(cb->args[0]));
- if (fib_table_dump(tb, skb, cb) < 0)
- goto out;
+ err = fib_table_dump(tb, skb, cb);
+ if (err < 0) {
+ if (likely(skb->len))
+ goto out;
+
+ goto out_err;
+ }
dumped = 1;
next:
e++;
}
}
out:
+ err = skb->len;
+out_err:
rcu_read_unlock();
cb->args[1] = e;
cb->args[0] = h;
- return skb->len;
+ return err;
}
/* Prepare and feed intra-kernel routing request.
/* rcu_read_lock is hold by caller */
hlist_for_each_entry_rcu(fa, &l->leaf, fa_list) {
+ int err;
+
if (i < s_i) {
i++;
continue;
continue;
}
- if (fib_dump_info(skb, NETLINK_CB(cb->skb).portid,
- cb->nlh->nlmsg_seq,
- RTM_NEWROUTE,
- tb->tb_id,
- fa->fa_type,
- xkey,
- KEYLENGTH - fa->fa_slen,
- fa->fa_tos,
- fa->fa_info, NLM_F_MULTI) < 0) {
+ err = fib_dump_info(skb, NETLINK_CB(cb->skb).portid,
+ cb->nlh->nlmsg_seq, RTM_NEWROUTE,
+ tb->tb_id, fa->fa_type,
+ xkey, KEYLENGTH - fa->fa_slen,
+ fa->fa_tos, fa->fa_info, NLM_F_MULTI);
+ if (err < 0) {
cb->args[4] = i;
- return -1;
+ return err;
}
i++;
}
t_key key = cb->args[3];
while ((l = leaf_walk_rcu(&tp, key)) != NULL) {
- if (fn_trie_dump_leaf(l, tb, skb, cb) < 0) {
+ int err;
+
+ err = fn_trie_dump_leaf(l, tb, skb, cb);
+ if (err < 0) {
cb->args[3] = key;
cb->args[2] = count;
- return -1;
+ return err;
}
++count;
struct net *net = dev_net(skb->dev);
int local = skb_rtable(skb)->rt_flags & RTCF_LOCAL;
struct mr_table *mrt;
+ struct net_device *dev;
+
+ /* skb->dev passed in is the loX master dev for vrfs.
+ * As there are no vifs associated with loopback devices,
+ * get the proper interface that does have a vif associated with it.
+ */
+ dev = skb->dev;
+ if (netif_is_l3_master(skb->dev)) {
+ dev = dev_get_by_index_rcu(net, IPCB(skb)->iif);
+ if (!dev) {
+ kfree_skb(skb);
+ return -ENODEV;
+ }
+ }
/* Packet is looped back after forward, it should not be
* forwarded second time, but still can be delivered locally.
/* already under rcu_read_lock() */
cache = ipmr_cache_find(mrt, ip_hdr(skb)->saddr, ip_hdr(skb)->daddr);
if (!cache) {
- int vif = ipmr_find_vif(mrt, skb->dev);
+ int vif = ipmr_find_vif(mrt, dev);
if (vif >= 0)
cache = ipmr_cache_find_any(mrt, ip_hdr(skb)->daddr,
}
read_lock(&mrt_lock);
- vif = ipmr_find_vif(mrt, skb->dev);
+ vif = ipmr_find_vif(mrt, dev);
if (vif >= 0) {
int err2 = ipmr_cache_unresolved(mrt, vif, skb);
read_unlock(&mrt_lock);
tcp_set_ca_state(sk, TCP_CA_Open);
tcp_clear_retrans(tp);
inet_csk_delack_init(sk);
+ /* Initialize rcv_mss to TCP_MIN_MSS to avoid division by 0
+ * issue in __tcp_select_window()
+ */
+ icsk->icsk_ack.rcv_mss = TCP_MIN_MSS;
tcp_init_send_head(sk);
memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
__sk_dst_reset(sk);
*/
if (pkt_len > mss) {
unsigned int new_len = (pkt_len / mss) * mss;
- if (!in_sack && new_len < pkt_len) {
+ if (!in_sack && new_len < pkt_len)
new_len += mss;
- if (new_len >= skb->len)
- return 0;
- }
pkt_len = new_len;
}
+
+ if (pkt_len >= skb->len && !in_sack)
+ return 0;
+
err = tcp_fragment(sk, skb, pkt_len, mss, GFP_ATOMIC);
if (err < 0)
return err;
int delta;
/* Non-retransmitted hole got filled? That's reordering */
- if (reord < prior_fackets)
+ if (reord < prior_fackets && reord <= tp->fackets_out)
tcp_update_reordering(sk, tp->fackets_out - reord, 0);
delta = tcp_is_fack(tp) ? pkts_acked :
udp_lib_rehash(sk, new_hash);
}
-int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
int rc;
* Note that in the success and error cases, the skb is assumed to
* have either been requeued or freed.
*/
-int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+static int udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
struct udp_sock *up = udp_sk(sk);
int is_udplite = IS_UDPLITE(sk);
int flags, int *addr_len);
int udp_sendpage(struct sock *sk, struct page *page, int offset, size_t size,
int flags);
-int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
void udp_destroy_sock(struct sock *sk);
#ifdef CONFIG_PROC_FS
INIT_HLIST_NODE(&ifa->addr_lst);
ifa->scope = scope;
ifa->prefix_len = pfxlen;
- ifa->flags = flags | IFA_F_TENTATIVE;
+ ifa->flags = flags;
+ /* No need to add the TENTATIVE flag for addresses with NODAD */
+ if (!(flags & IFA_F_NODAD))
+ ifa->flags |= IFA_F_TENTATIVE;
ifa->valid_lft = valid_lft;
ifa->prefered_lft = prefered_lft;
ifa->cstamp = ifa->tstamp = jiffies;
const struct net_offload *ops;
int proto;
struct frag_hdr *fptr;
- unsigned int unfrag_ip6hlen;
unsigned int payload_len;
u8 *prevhdr;
int offset = 0;
skb->network_header = (u8 *)ipv6h - skb->head;
if (udpfrag) {
- unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
- fptr = (struct frag_hdr *)((u8 *)ipv6h + unfrag_ip6hlen);
+ int err = ip6_find_1stfragopt(skb, &prevhdr);
+ if (err < 0)
+ return ERR_PTR(err);
+ fptr = (struct frag_hdr *)((u8 *)ipv6h + err);
fptr->frag_off = htons(offset);
if (skb->next)
fptr->frag_off |= htons(IP6_MF);
int ptr, offset = 0, err = 0;
u8 *prevhdr, nexthdr = 0;
- hlen = ip6_find_1stfragopt(skb, &prevhdr);
+ err = ip6_find_1stfragopt(skb, &prevhdr);
+ if (err < 0)
+ goto fail;
+ hlen = err;
nexthdr = *prevhdr;
mtu = ip6_skb_dst_mtu(skb);
*/
alloclen += sizeof(struct frag_hdr);
+ copy = datalen - transhdrlen - fraggap;
+ if (copy < 0) {
+ err = -EINVAL;
+ goto error;
+ }
if (transhdrlen) {
skb = sock_alloc_send_skb(sk,
alloclen + hh_len,
data += fraggap;
pskb_trim_unique(skb_prev, maxfraglen);
}
- copy = datalen - transhdrlen - fraggap;
-
- if (copy < 0) {
- err = -EINVAL;
- kfree_skb(skb);
- goto error;
- } else if (copy > 0 && getfrag(from, data + transhdrlen, offset, copy, fraggap, skb) < 0) {
+ if (copy > 0 &&
+ getfrag(from, data + transhdrlen, offset,
+ copy, fraggap, skb) < 0) {
err = -EFAULT;
kfree_skb(skb);
goto error;
int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
{
u16 offset = sizeof(struct ipv6hdr);
- struct ipv6_opt_hdr *exthdr =
- (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
unsigned int packet_len = skb_tail_pointer(skb) -
skb_network_header(skb);
int found_rhdr = 0;
*nexthdr = &ipv6_hdr(skb)->nexthdr;
- while (offset + 1 <= packet_len) {
+ while (offset <= packet_len) {
+ struct ipv6_opt_hdr *exthdr;
switch (**nexthdr) {
return offset;
}
- offset += ipv6_optlen(exthdr);
- *nexthdr = &exthdr->nexthdr;
+ if (offset + sizeof(struct ipv6_opt_hdr) > packet_len)
+ return -EINVAL;
+
exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
offset);
+ offset += ipv6_optlen(exthdr);
+ *nexthdr = &exthdr->nexthdr;
}
- return offset;
+ return -EINVAL;
}
EXPORT_SYMBOL(ip6_find_1stfragopt);
newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
#endif
+ newnp->ipv6_mc_list = NULL;
newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
First: no IPv4 options.
*/
newinet->inet_opt = NULL;
+ newnp->ipv6_mc_list = NULL;
newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
return;
}
-int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+static int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
int rc;
}
EXPORT_SYMBOL(udpv6_encap_enable);
-int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
+static int udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
{
struct udp_sock *up = udp_sk(sk);
int is_udplite = IS_UDPLITE(sk);
int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len);
int udpv6_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int noblock,
int flags, int *addr_len);
-int __udpv6_queue_rcv_skb(struct sock *sk, struct sk_buff *skb);
void udpv6_destroy_sock(struct sock *sk);
#ifdef CONFIG_PROC_FS
u8 frag_hdr_sz = sizeof(struct frag_hdr);
__wsum csum;
int tnl_hlen;
+ int err;
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss))
/* Find the unfragmentable header and shift it left by frag_hdr_sz
* bytes to insert fragment header.
*/
- unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+ err = ip6_find_1stfragopt(skb, &prevhdr);
+ if (err < 0)
+ return ERR_PTR(err);
+ unfrag_ip6hlen = err;
nexthdr = *prevhdr;
*prevhdr = NEXTHDR_FRAGMENT;
unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) +
{
unsigned int verdict = NF_DROP;
- if (IP_VS_FWD_METHOD(cp) != 0) {
- pr_err("shouldn't reach here, because the box is on the "
- "half connection in the tun/dr module.\n");
- }
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
/* Ensure the checksum is correct */
if (!skb_csum_unnecessary(skb) && ip_vs_checksum_complete(skb, ihl)) {
ip_vs_notrack(skb);
else
ip_vs_update_conntrack(skb, cp, 0);
+
+ignore_cp:
verdict = NF_ACCEPT;
out:
*/
cp = pp->conn_out_get(ipvs, af, skb, &iph);
- if (likely(cp))
+ if (likely(cp)) {
+ if (IP_VS_FWD_METHOD(cp) != IP_VS_CONN_F_MASQ)
+ goto ignore_cp;
return handle_response(af, skb, pd, cp, &iph, hooknum);
+ }
/* Check for real-server-started requests */
if (atomic_read(&ipvs->conn_out_counter)) {
}
}
}
+
+out:
IP_VS_DBG_PKT(12, af, pp, skb, iph.off,
"ip_vs_out: packet continues traversal as normal");
return NF_ACCEPT;
+
+ignore_cp:
+ __ip_vs_conn_put(cp);
+ goto out;
}
/*
#endif
if (h != NULL && !try_module_get(h->me))
h = NULL;
+ if (h != NULL && !refcount_inc_not_zero(&h->refcnt)) {
+ module_put(h->me);
+ h = NULL;
+ }
rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(nf_conntrack_helper_try_module_get);
+void nf_conntrack_helper_put(struct nf_conntrack_helper *helper)
+{
+ refcount_dec(&helper->refcnt);
+ module_put(helper->me);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_helper_put);
+
struct nf_conn_help *
nf_ct_helper_ext_add(struct nf_conn *ct,
struct nf_conntrack_helper *helper, gfp_t gfp)
}
}
}
+ refcount_set(&me->refcnt, 1);
hlist_add_head_rcu(&me->hnode, &nf_ct_helper_hash[h]);
nf_ct_helper_count++;
out:
#include <net/netfilter/nf_conntrack_zones.h>
#include <net/netfilter/nf_conntrack_timestamp.h>
#include <net/netfilter/nf_conntrack_labels.h>
+#include <net/netfilter/nf_conntrack_seqadj.h>
+#include <net/netfilter/nf_conntrack_synproxy.h>
#ifdef CONFIG_NF_NAT_NEEDED
#include <net/netfilter/nf_nat_core.h>
#include <net/netfilter/nf_nat_l4proto.h>
static int
ctnetlink_parse_tuple(const struct nlattr * const cda[],
- struct nf_conntrack_tuple *tuple,
- enum ctattr_type type, u_int8_t l3num,
- struct nf_conntrack_zone *zone)
+ struct nf_conntrack_tuple *tuple, u32 type,
+ u_int8_t l3num, struct nf_conntrack_zone *zone)
{
struct nlattr *tb[CTA_TUPLE_MAX+1];
int err;
nf_ct_tstamp_ext_add(ct, GFP_ATOMIC);
nf_ct_ecache_ext_add(ct, 0, 0, GFP_ATOMIC);
nf_ct_labels_ext_add(ct);
+ nfct_seqadj_ext_add(ct);
+ nfct_synproxy_ext_add(ct);
/* we must add conntrack extensions before confirmation. */
ct->status |= IPS_CONFIRMED;
static int ctnetlink_exp_dump_tuple(struct sk_buff *skb,
const struct nf_conntrack_tuple *tuple,
- enum ctattr_expect type)
+ u32 type)
{
struct nlattr *nest_parms;
{
struct nf_conntrack_tuple curr_tuple, new_tuple;
+ /* Can't setup nat info for confirmed ct. */
+ if (nf_ct_is_confirmed(ct))
+ return NF_ACCEPT;
+
NF_CT_ASSERT(maniptype == NF_NAT_MANIP_SRC ||
maniptype == NF_NAT_MANIP_DST);
BUG_ON(nf_nat_initialized(ct, maniptype));
return nf_tables_fill_setelem(args->skb, set, elem);
}
+struct nft_set_dump_ctx {
+ const struct nft_set *set;
+ struct nft_ctx ctx;
+};
+
static int nf_tables_dump_set(struct sk_buff *skb, struct netlink_callback *cb)
{
+ struct nft_set_dump_ctx *dump_ctx = cb->data;
struct net *net = sock_net(skb->sk);
- u8 genmask = nft_genmask_cur(net);
+ struct nft_af_info *afi;
+ struct nft_table *table;
struct nft_set *set;
struct nft_set_dump_args args;
- struct nft_ctx ctx;
- struct nlattr *nla[NFTA_SET_ELEM_LIST_MAX + 1];
+ bool set_found = false;
struct nfgenmsg *nfmsg;
struct nlmsghdr *nlh;
struct nlattr *nest;
u32 portid, seq;
- int event, err;
+ int event;
- err = nlmsg_parse(cb->nlh, sizeof(struct nfgenmsg), nla,
- NFTA_SET_ELEM_LIST_MAX, nft_set_elem_list_policy,
- NULL);
- if (err < 0)
- return err;
+ rcu_read_lock();
+ list_for_each_entry_rcu(afi, &net->nft.af_info, list) {
+ if (afi != dump_ctx->ctx.afi)
+ continue;
- err = nft_ctx_init_from_elemattr(&ctx, net, cb->skb, cb->nlh,
- (void *)nla, genmask);
- if (err < 0)
- return err;
+ list_for_each_entry_rcu(table, &afi->tables, list) {
+ if (table != dump_ctx->ctx.table)
+ continue;
- set = nf_tables_set_lookup(ctx.table, nla[NFTA_SET_ELEM_LIST_SET],
- genmask);
- if (IS_ERR(set))
- return PTR_ERR(set);
+ list_for_each_entry_rcu(set, &table->sets, list) {
+ if (set == dump_ctx->set) {
+ set_found = true;
+ break;
+ }
+ }
+ break;
+ }
+ break;
+ }
+
+ if (!set_found) {
+ rcu_read_unlock();
+ return -ENOENT;
+ }
event = nfnl_msg_type(NFNL_SUBSYS_NFTABLES, NFT_MSG_NEWSETELEM);
portid = NETLINK_CB(cb->skb).portid;
goto nla_put_failure;
nfmsg = nlmsg_data(nlh);
- nfmsg->nfgen_family = ctx.afi->family;
+ nfmsg->nfgen_family = afi->family;
nfmsg->version = NFNETLINK_V0;
- nfmsg->res_id = htons(ctx.net->nft.base_seq & 0xffff);
+ nfmsg->res_id = htons(net->nft.base_seq & 0xffff);
- if (nla_put_string(skb, NFTA_SET_ELEM_LIST_TABLE, ctx.table->name))
+ if (nla_put_string(skb, NFTA_SET_ELEM_LIST_TABLE, table->name))
goto nla_put_failure;
if (nla_put_string(skb, NFTA_SET_ELEM_LIST_SET, set->name))
goto nla_put_failure;
args.cb = cb;
args.skb = skb;
- args.iter.genmask = nft_genmask_cur(ctx.net);
+ args.iter.genmask = nft_genmask_cur(net);
args.iter.skip = cb->args[0];
args.iter.count = 0;
args.iter.err = 0;
args.iter.fn = nf_tables_dump_setelem;
- set->ops->walk(&ctx, set, &args.iter);
+ set->ops->walk(&dump_ctx->ctx, set, &args.iter);
+ rcu_read_unlock();
nla_nest_end(skb, nest);
nlmsg_end(skb, nlh);
return skb->len;
nla_put_failure:
+ rcu_read_unlock();
return -ENOSPC;
}
+static int nf_tables_dump_set_done(struct netlink_callback *cb)
+{
+ kfree(cb->data);
+ return 0;
+}
+
static int nf_tables_getsetelem(struct net *net, struct sock *nlsk,
struct sk_buff *skb, const struct nlmsghdr *nlh,
const struct nlattr * const nla[])
if (nlh->nlmsg_flags & NLM_F_DUMP) {
struct netlink_dump_control c = {
.dump = nf_tables_dump_set,
+ .done = nf_tables_dump_set_done,
};
+ struct nft_set_dump_ctx *dump_ctx;
+
+ dump_ctx = kmalloc(sizeof(*dump_ctx), GFP_KERNEL);
+ if (!dump_ctx)
+ return -ENOMEM;
+
+ dump_ctx->set = set;
+ dump_ctx->ctx = ctx;
+
+ c.data = dump_ctx;
return netlink_dump_start(nlsk, skb, nlh, &c);
}
return -EOPNOTSUPP;
{
struct nft_set_ext *ext = nft_set_elem_ext(set, elem);
- nft_data_uninit(nft_set_ext_key(ext), NFT_DATA_VALUE);
+ nft_data_release(nft_set_ext_key(ext), NFT_DATA_VALUE);
if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
- nft_data_uninit(nft_set_ext_data(ext), set->dtype);
+ nft_data_release(nft_set_ext_data(ext), set->dtype);
if (destroy_expr && nft_set_ext_exists(ext, NFT_SET_EXT_EXPR))
nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext));
if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
}
EXPORT_SYMBOL_GPL(nft_set_elem_destroy);
+/* Only called from commit path, nft_set_elem_deactivate() already deals with
+ * the refcounting from the preparation phase.
+ */
+static void nf_tables_set_elem_destroy(const struct nft_set *set, void *elem)
+{
+ struct nft_set_ext *ext = nft_set_elem_ext(set, elem);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR))
+ nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext));
+ kfree(elem);
+}
+
static int nft_setelem_parse_flags(const struct nft_set *set,
const struct nlattr *attr, u32 *flags)
{
kfree(elem.priv);
err3:
if (nla[NFTA_SET_ELEM_DATA] != NULL)
- nft_data_uninit(&data, d2.type);
+ nft_data_release(&data, d2.type);
err2:
- nft_data_uninit(&elem.key.val, d1.type);
+ nft_data_release(&elem.key.val, d1.type);
err1:
return err;
}
return err;
}
+/**
+ * nft_data_hold - hold a nft_data item
+ *
+ * @data: struct nft_data to release
+ * @type: type of data
+ *
+ * Hold a nft_data item. NFT_DATA_VALUE types can be silently discarded,
+ * NFT_DATA_VERDICT bumps the reference to chains in case of NFT_JUMP and
+ * NFT_GOTO verdicts. This function must be called on active data objects
+ * from the second phase of the commit protocol.
+ */
+static void nft_data_hold(const struct nft_data *data, enum nft_data_types type)
+{
+ if (type == NFT_DATA_VERDICT) {
+ switch (data->verdict.code) {
+ case NFT_JUMP:
+ case NFT_GOTO:
+ data->verdict.chain->use++;
+ break;
+ }
+ }
+}
+
+static void nft_set_elem_activate(const struct net *net,
+ const struct nft_set *set,
+ struct nft_set_elem *elem)
+{
+ const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
+ nft_data_hold(nft_set_ext_data(ext), set->dtype);
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
+ (*nft_set_ext_obj(ext))->use++;
+}
+
+static void nft_set_elem_deactivate(const struct net *net,
+ const struct nft_set *set,
+ struct nft_set_elem *elem)
+{
+ const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv);
+
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA))
+ nft_data_release(nft_set_ext_data(ext), set->dtype);
+ if (nft_set_ext_exists(ext, NFT_SET_EXT_OBJREF))
+ (*nft_set_ext_obj(ext))->use--;
+}
+
static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set,
const struct nlattr *attr)
{
kfree(elem.priv);
elem.priv = priv;
+ nft_set_elem_deactivate(ctx->net, set, &elem);
+
nft_trans_elem(trans) = elem;
list_add_tail(&trans->list, &ctx->net->nft.commit_list);
return 0;
err3:
kfree(elem.priv);
err2:
- nft_data_uninit(&elem.key.val, desc.type);
+ nft_data_release(&elem.key.val, desc.type);
err1:
return err;
}
nft_set_destroy(nft_trans_set(trans));
break;
case NFT_MSG_DELSETELEM:
- nft_set_elem_destroy(nft_trans_elem_set(trans),
- nft_trans_elem(trans).priv, true);
+ nf_tables_set_elem_destroy(nft_trans_elem_set(trans),
+ nft_trans_elem(trans).priv);
break;
case NFT_MSG_DELOBJ:
nft_obj_destroy(nft_trans_obj(trans));
case NFT_MSG_DELSETELEM:
te = (struct nft_trans_elem *)trans->data;
+ nft_set_elem_activate(net, te->set, &te->elem);
te->set->ops->activate(net, te->set, &te->elem);
te->set->ndeact--;
EXPORT_SYMBOL_GPL(nft_data_init);
/**
- * nft_data_uninit - release a nft_data item
+ * nft_data_release - release a nft_data item
*
* @data: struct nft_data to release
* @type: type of data
* Release a nft_data item. NFT_DATA_VALUE types can be silently discarded,
* all others need to be released by calling this function.
*/
-void nft_data_uninit(const struct nft_data *data, enum nft_data_types type)
+void nft_data_release(const struct nft_data *data, enum nft_data_types type)
{
if (type < NFT_DATA_VERDICT)
return;
WARN_ON(1);
}
}
-EXPORT_SYMBOL_GPL(nft_data_uninit);
+EXPORT_SYMBOL_GPL(nft_data_release);
int nft_data_dump(struct sk_buff *skb, int attr, const struct nft_data *data,
enum nft_data_types type, unsigned int len)
tuple_set = true;
}
+ ret = -ENOENT;
list_for_each_entry_safe(nlcth, n, &nfnl_cthelper_list, list) {
cur = &nlcth->helper;
j++;
tuple.dst.protonum != cur->tuple.dst.protonum))
continue;
- found = true;
- nf_conntrack_helper_unregister(cur);
- kfree(cur->expect_policy);
+ if (refcount_dec_if_one(&cur->refcnt)) {
+ found = true;
+ nf_conntrack_helper_unregister(cur);
+ kfree(cur->expect_policy);
- list_del(&nlcth->list);
- kfree(nlcth);
+ list_del(&nlcth->list);
+ kfree(nlcth);
+ } else {
+ ret = -EBUSY;
+ }
}
/* Make sure we return success if we flush and there is no helpers */
- return (found || j == 0) ? 0 : -ENOENT;
+ return (found || j == 0) ? 0 : ret;
}
static const struct nla_policy nfnl_cthelper_policy[NFCTH_MAX+1] = {
tb[NFTA_BITWISE_MASK]);
if (err < 0)
return err;
- if (d1.len != priv->len)
- return -EINVAL;
+ if (d1.len != priv->len) {
+ err = -EINVAL;
+ goto err1;
+ }
err = nft_data_init(NULL, &priv->xor, sizeof(priv->xor), &d2,
tb[NFTA_BITWISE_XOR]);
if (err < 0)
- return err;
- if (d2.len != priv->len)
- return -EINVAL;
+ goto err1;
+ if (d2.len != priv->len) {
+ err = -EINVAL;
+ goto err2;
+ }
return 0;
+err2:
+ nft_data_release(&priv->xor, d2.type);
+err1:
+ nft_data_release(&priv->mask, d1.type);
+ return err;
}
static int nft_bitwise_dump(struct sk_buff *skb, const struct nft_expr *expr)
if (err < 0)
return ERR_PTR(err);
+ if (desc.type != NFT_DATA_VALUE) {
+ err = -EINVAL;
+ goto err1;
+ }
+
if (desc.len <= sizeof(u32) && op == NFT_CMP_EQ)
return &nft_cmp_fast_ops;
- else
- return &nft_cmp_ops;
+
+ return &nft_cmp_ops;
+err1:
+ nft_data_release(&data, desc.type);
+ return ERR_PTR(-EINVAL);
}
struct nft_expr_type nft_cmp_type __read_mostly = {
struct nft_ct_helper_obj *priv = nft_obj_data(obj);
if (priv->helper4)
- module_put(priv->helper4->me);
+ nf_conntrack_helper_put(priv->helper4);
if (priv->helper6)
- module_put(priv->helper6->me);
+ nf_conntrack_helper_put(priv->helper6);
}
static void nft_ct_helper_obj_eval(struct nft_object *obj,
return 0;
err1:
- nft_data_uninit(&priv->data, desc.type);
+ nft_data_release(&priv->data, desc.type);
return err;
}
const struct nft_expr *expr)
{
const struct nft_immediate_expr *priv = nft_expr_priv(expr);
- return nft_data_uninit(&priv->data, nft_dreg_to_type(priv->dreg));
+
+ return nft_data_release(&priv->data, nft_dreg_to_type(priv->dreg));
}
static int nft_immediate_dump(struct sk_buff *skb, const struct nft_expr *expr)
priv->len = desc_from.len;
return 0;
err2:
- nft_data_uninit(&priv->data_to, desc_to.type);
+ nft_data_release(&priv->data_to, desc_to.type);
err1:
- nft_data_uninit(&priv->data_from, desc_from.type);
+ nft_data_release(&priv->data_from, desc_from.type);
return err;
}
struct nft_set_elem elem;
int err;
- err = rhashtable_walk_init(&priv->ht, &hti, GFP_KERNEL);
+ err = rhashtable_walk_init(&priv->ht, &hti, GFP_ATOMIC);
iter->err = err;
if (err)
return;
&U->u.user.revision, K->u.kernel.TYPE->revision)
int xt_data_to_user(void __user *dst, const void *src,
- int usersize, int size)
+ int usersize, int size, int aligned_size)
{
usersize = usersize ? : size;
if (copy_to_user(dst, src, usersize))
return -EFAULT;
- if (usersize != size && clear_user(dst + usersize, size - usersize))
+ if (usersize != aligned_size &&
+ clear_user(dst + usersize, aligned_size - usersize))
return -EFAULT;
return 0;
}
EXPORT_SYMBOL_GPL(xt_data_to_user);
-#define XT_DATA_TO_USER(U, K, TYPE, C_SIZE) \
+#define XT_DATA_TO_USER(U, K, TYPE) \
xt_data_to_user(U->data, K->data, \
K->u.kernel.TYPE->usersize, \
- C_SIZE ? : K->u.kernel.TYPE->TYPE##size)
+ K->u.kernel.TYPE->TYPE##size, \
+ XT_ALIGN(K->u.kernel.TYPE->TYPE##size))
int xt_match_to_user(const struct xt_entry_match *m,
struct xt_entry_match __user *u)
{
return XT_OBJ_TO_USER(u, m, match, 0) ||
- XT_DATA_TO_USER(u, m, match, 0);
+ XT_DATA_TO_USER(u, m, match);
}
EXPORT_SYMBOL_GPL(xt_match_to_user);
struct xt_entry_target __user *u)
{
return XT_OBJ_TO_USER(u, t, target, 0) ||
- XT_DATA_TO_USER(u, t, target, 0);
+ XT_DATA_TO_USER(u, t, target);
}
EXPORT_SYMBOL_GPL(xt_target_to_user);
}
EXPORT_SYMBOL_GPL(xt_compat_match_from_user);
+#define COMPAT_XT_DATA_TO_USER(U, K, TYPE, C_SIZE) \
+ xt_data_to_user(U->data, K->data, \
+ K->u.kernel.TYPE->usersize, \
+ C_SIZE, \
+ COMPAT_XT_ALIGN(C_SIZE))
+
int xt_compat_match_to_user(const struct xt_entry_match *m,
void __user **dstptr, unsigned int *size)
{
if (match->compat_to_user((void __user *)cm->data, m->data))
return -EFAULT;
} else {
- if (XT_DATA_TO_USER(cm, m, match, msize - sizeof(*cm)))
+ if (COMPAT_XT_DATA_TO_USER(cm, m, match, msize - sizeof(*cm)))
return -EFAULT;
}
if (target->compat_to_user((void __user *)ct->data, t->data))
return -EFAULT;
} else {
- if (XT_DATA_TO_USER(ct, t, target, tsize - sizeof(*ct)))
+ if (COMPAT_XT_DATA_TO_USER(ct, t, target, tsize - sizeof(*ct)))
return -EFAULT;
}
help = nf_ct_helper_ext_add(ct, helper, GFP_KERNEL);
if (help == NULL) {
- module_put(helper->me);
+ nf_conntrack_helper_put(helper);
return -ENOMEM;
}
err4:
help = nfct_help(ct);
if (help)
- module_put(help->helper->me);
+ nf_conntrack_helper_put(help->helper);
err3:
nf_ct_tmpl_free(ct);
err2:
if (ct) {
help = nfct_help(ct);
if (help)
- module_put(help->helper->me);
+ nf_conntrack_helper_put(help->helper);
nf_ct_netns_put(par->net, par->family);
help = nf_ct_helper_ext_add(info->ct, helper, GFP_KERNEL);
if (!help) {
- module_put(helper->me);
+ nf_conntrack_helper_put(helper);
return -ENOMEM;
}
static void __ovs_ct_free_action(struct ovs_conntrack_info *ct_info)
{
if (ct_info->helper)
- module_put(ct_info->helper->me);
+ nf_conntrack_helper_put(ct_info->helper);
if (ct_info->ct)
nf_ct_tmpl_free(ct_info->ct);
}
dev = dev_get_by_index(sock_net(&po->sk), saddr->sll_ifindex);
}
- sockc.tsflags = po->sk.sk_tsflags;
- if (msg->msg_controllen) {
- err = sock_cmsg_send(&po->sk, msg, &sockc);
- if (unlikely(err))
- goto out;
- }
-
err = -ENXIO;
if (unlikely(dev == NULL))
goto out;
if (unlikely(!(dev->flags & IFF_UP)))
goto out_put;
+ sockc.tsflags = po->sk.sk_tsflags;
+ if (msg->msg_controllen) {
+ err = sock_cmsg_send(&po->sk, msg, &sockc);
+ if (unlikely(err))
+ goto out_put;
+ }
+
if (po->sk.sk_socket->type == SOCK_RAW)
reserve = dev->hard_header_len;
size_max = po->tx_ring.frame_size
*arg = (unsigned long) head;
rcu_assign_pointer(tp->root, new);
- call_rcu(&head->rcu, mall_destroy_rcu);
return 0;
err_replace_hw_filter:
if (!qdisc_dev(root))
return 0;
+ if (tcm->tcm_parent) {
+ q = qdisc_match_from_root(root, TC_H_MAJ(tcm->tcm_parent));
+ if (q && tc_dump_tclass_qdisc(q, skb, tcm, cb, t_p, s_t) < 0)
+ return -1;
+ return 0;
+ }
hash_for_each(qdisc_dev(root)->qdisc_hash, b, q, hash) {
if (tc_dump_tclass_qdisc(q, skb, tcm, cb, t_p, s_t) < 0)
return -1;
struct sctp_bind_addr *bp;
struct ipv6_pinfo *np = inet6_sk(sk);
struct sctp_sockaddr_entry *laddr;
- union sctp_addr *baddr = NULL;
union sctp_addr *daddr = &t->ipaddr;
union sctp_addr dst_saddr;
struct in6_addr *final_p, final;
__u8 matchlen = 0;
- __u8 bmatchlen;
sctp_scope_t scope;
memset(fl6, 0, sizeof(struct flowi6));
*/
rcu_read_lock();
list_for_each_entry_rcu(laddr, &bp->address_list, list) {
- if (!laddr->valid)
+ struct dst_entry *bdst;
+ __u8 bmatchlen;
+
+ if (!laddr->valid ||
+ laddr->state != SCTP_ADDR_SRC ||
+ laddr->a.sa.sa_family != AF_INET6 ||
+ scope > sctp_scope(&laddr->a))
continue;
- if ((laddr->state == SCTP_ADDR_SRC) &&
- (laddr->a.sa.sa_family == AF_INET6) &&
- (scope <= sctp_scope(&laddr->a))) {
- bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
- if (!baddr || (matchlen < bmatchlen)) {
- baddr = &laddr->a;
- matchlen = bmatchlen;
- }
- }
- }
- if (baddr) {
- fl6->saddr = baddr->v6.sin6_addr;
- fl6->fl6_sport = baddr->v6.sin6_port;
+
+ fl6->saddr = laddr->a.v6.sin6_addr;
+ fl6->fl6_sport = laddr->a.v6.sin6_port;
final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
- dst = ip6_dst_lookup_flow(sk, fl6, final_p);
+ bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
+
+ if (!IS_ERR(bdst) &&
+ ipv6_chk_addr(dev_net(bdst->dev),
+ &laddr->a.v6.sin6_addr, bdst->dev, 1)) {
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
+ dst = bdst;
+ break;
+ }
+
+ bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
+ if (matchlen > bmatchlen)
+ continue;
+
+ if (!IS_ERR_OR_NULL(dst))
+ dst_release(dst);
+ dst = bdst;
+ matchlen = bmatchlen;
}
rcu_read_unlock();
newnp = inet6_sk(newsk);
memcpy(newnp, np, sizeof(struct ipv6_pinfo));
+ newnp->ipv6_mc_list = NULL;
+ newnp->ipv6_ac_list = NULL;
+ newnp->ipv6_fl_list = NULL;
rcu_read_lock();
opt = rcu_dereference(np->opt);
The Linux implementation of the SMC-R solution is designed as
a separate socket family SMC.
+ Warning: SMC will expose all memory for remote reads and writes
+ once a connection is established. Don't enable this option except
+ for tightly controlled lab environment.
+
Select this option if you want to run SMC socket applications
config SMC_DIAG
memcpy(&cclc.lcl.mac, &link->smcibdev->mac[link->ibport - 1], ETH_ALEN);
hton24(cclc.qpn, link->roce_qp->qp_num);
cclc.rmb_rkey =
- htonl(conn->rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+ htonl(conn->rmb_desc->rkey[SMC_SINGLE_LINK]);
cclc.conn_idx = 1; /* for now: 1 RMB = 1 RMBE */
cclc.rmbe_alert_token = htonl(conn->alert_token_local);
cclc.qp_mtu = min(link->path_mtu, link->peer_mtu);
memcpy(&aclc.lcl.mac, link->smcibdev->mac[link->ibport - 1], ETH_ALEN);
hton24(aclc.qpn, link->roce_qp->qp_num);
aclc.rmb_rkey =
- htonl(conn->rmb_desc->mr_rx[SMC_SINGLE_LINK]->rkey);
+ htonl(conn->rmb_desc->rkey[SMC_SINGLE_LINK]);
aclc.conn_idx = 1; /* as long as 1 RMB = 1 RMBE */
aclc.rmbe_alert_token = htonl(conn->alert_token_local);
aclc.qp_mtu = link->path_mtu;
rmb_desc = NULL;
continue; /* if mapping failed, try smaller one */
}
- rc = smc_ib_get_memory_region(lgr->lnk[SMC_SINGLE_LINK].roce_pd,
- IB_ACCESS_REMOTE_WRITE |
- IB_ACCESS_LOCAL_WRITE,
- &rmb_desc->mr_rx[SMC_SINGLE_LINK]);
- if (rc) {
- smc_ib_buf_unmap(lgr->lnk[SMC_SINGLE_LINK].smcibdev,
- tmp_bufsize, rmb_desc,
- DMA_FROM_DEVICE);
- kfree(rmb_desc->cpu_addr);
- kfree(rmb_desc);
- rmb_desc = NULL;
- continue;
- }
+ rmb_desc->rkey[SMC_SINGLE_LINK] =
+ lgr->lnk[SMC_SINGLE_LINK].roce_pd->unsafe_global_rkey;
rmb_desc->used = 1;
write_lock_bh(&lgr->rmbs_lock);
list_add(&rmb_desc->list,
for (i = 0; i < SMC_RMBS_PER_LGR_MAX; i++) {
if ((lgr->rtokens[i][SMC_SINGLE_LINK].rkey == rkey) &&
+ (lgr->rtokens[i][SMC_SINGLE_LINK].dma_addr == dma_addr) &&
test_bit(i, lgr->rtokens_used_mask)) {
conn->rtoken_idx = i;
return 0;
u64 dma_addr[SMC_LINKS_PER_LGR_MAX];
/* mapped address of buffer */
void *cpu_addr; /* virtual address of buffer */
- struct ib_mr *mr_rx[SMC_LINKS_PER_LGR_MAX];
+ u32 rkey[SMC_LINKS_PER_LGR_MAX];
/* for rmb only:
* rkey provided to peer
*/
* identifier
*/
-int smc_ib_get_memory_region(struct ib_pd *pd, int access_flags,
- struct ib_mr **mr)
-{
- int rc;
-
- if (*mr)
- return 0; /* already done */
-
- /* obtain unique key -
- * next invocation of get_dma_mr returns a different key!
- */
- *mr = pd->device->get_dma_mr(pd, access_flags);
- rc = PTR_ERR_OR_ZERO(*mr);
- if (IS_ERR(*mr))
- *mr = NULL;
- return rc;
-}
-
static int smc_ib_modify_qp_init(struct smc_link *lnk)
{
struct ib_qp_attr qp_attr;
{
int rc;
- lnk->roce_pd = ib_alloc_pd(lnk->smcibdev->ibdev, 0);
+ lnk->roce_pd = ib_alloc_pd(lnk->smcibdev->ibdev,
+ IB_PD_UNSAFE_GLOBAL_RKEY);
rc = PTR_ERR_OR_ZERO(lnk->roce_pd);
if (IS_ERR(lnk->roce_pd))
lnk->roce_pd = NULL;
int smc_ib_create_protection_domain(struct smc_link *lnk);
void smc_ib_destroy_queue_pair(struct smc_link *lnk);
int smc_ib_create_queue_pair(struct smc_link *lnk);
-int smc_ib_get_memory_region(struct ib_pd *pd, int access_flags,
- struct ib_mr **mr);
int smc_ib_ready_link(struct smc_link *lnk);
int smc_ib_modify_qp_rts(struct smc_link *lnk);
int smc_ib_modify_qp_reset(struct smc_link *lnk);
return 0;
}
-#define tipc_wait_for_cond(sock_, timeout_, condition_) \
-({ \
- int rc_ = 0; \
- int done_ = 0; \
- \
- while (!(condition_) && !done_) { \
- struct sock *sk_ = sock->sk; \
- DEFINE_WAIT_FUNC(wait_, woken_wake_function); \
- \
- rc_ = tipc_sk_sock_err(sock_, timeout_); \
- if (rc_) \
- break; \
- prepare_to_wait(sk_sleep(sk_), &wait_, \
- TASK_INTERRUPTIBLE); \
- done_ = sk_wait_event(sk_, timeout_, \
- (condition_), &wait_); \
- remove_wait_queue(sk_sleep(sk_), &wait_); \
- } \
- rc_; \
+#define tipc_wait_for_cond(sock_, timeo_, condition_) \
+({ \
+ struct sock *sk_; \
+ int rc_; \
+ \
+ while ((rc_ = !(condition_))) { \
+ DEFINE_WAIT_FUNC(wait_, woken_wake_function); \
+ sk_ = (sock_)->sk; \
+ rc_ = tipc_sk_sock_err((sock_), timeo_); \
+ if (rc_) \
+ break; \
+ prepare_to_wait(sk_sleep(sk_), &wait_, TASK_INTERRUPTIBLE); \
+ release_sock(sk_); \
+ *(timeo_) = wait_woken(&wait_, TASK_INTERRUPTIBLE, *(timeo_)); \
+ sched_annotate_sleep(); \
+ lock_sock(sk_); \
+ remove_wait_queue(sk_sleep(sk_), &wait_); \
+ } \
+ rc_; \
})
/**
long timeout;
int err;
struct vsock_transport_send_notify_data send_data;
-
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
sk = sock->sk;
vsk = vsock_sk(sk);
if (err < 0)
goto out;
-
while (total_written < len) {
ssize_t written;
- prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
+ add_wait_queue(sk_sleep(sk), &wait);
while (vsock_stream_has_space(vsk) == 0 &&
sk->sk_err == 0 &&
!(sk->sk_shutdown & SEND_SHUTDOWN) &&
/* Don't wait for non-blocking sockets. */
if (timeout == 0) {
err = -EAGAIN;
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
err = transport->notify_send_pre_block(vsk, &send_data);
if (err < 0) {
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
release_sock(sk);
- timeout = schedule_timeout(timeout);
+ timeout = wait_woken(&wait, TASK_INTERRUPTIBLE, timeout);
lock_sock(sk);
if (signal_pending(current)) {
err = sock_intr_errno(timeout);
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
} else if (timeout == 0) {
err = -EAGAIN;
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
goto out_err;
}
-
- prepare_to_wait(sk_sleep(sk), &wait,
- TASK_INTERRUPTIBLE);
}
- finish_wait(sk_sleep(sk), &wait);
+ remove_wait_queue(sk_sleep(sk), &wait);
/* These checks occur both as part of and after the loop
* conditional since we need to check before and after
static int __init x25_init(void)
{
- int rc = proto_register(&x25_proto, 0);
+ int rc;
- if (rc != 0)
+ rc = proto_register(&x25_proto, 0);
+ if (rc)
goto out;
rc = sock_register(&x25_family_ops);
- if (rc != 0)
+ if (rc)
goto out_proto;
dev_add_pack(&x25_packet_type);
rc = register_netdevice_notifier(&x25_dev_notifier);
- if (rc != 0)
+ if (rc)
goto out_sock;
- pr_info("Linux Version 0.2\n");
+ rc = x25_register_sysctl();
+ if (rc)
+ goto out_dev;
- x25_register_sysctl();
rc = x25_proc_init();
- if (rc != 0)
- goto out_dev;
+ if (rc)
+ goto out_sysctl;
+
+ pr_info("Linux Version 0.2\n");
+
out:
return rc;
+out_sysctl:
+ x25_unregister_sysctl();
out_dev:
unregister_netdevice_notifier(&x25_dev_notifier);
out_sock:
+ dev_remove_pack(&x25_packet_type);
sock_unregister(AF_X25);
out_proto:
proto_unregister(&x25_proto);
{ },
};
-void __init x25_register_sysctl(void)
+int __init x25_register_sysctl(void)
{
x25_table_header = register_net_sysctl(&init_net, "net/x25", x25_table);
+ if (!x25_table_header)
+ return -ENOMEM;
+ return 0;
}
void x25_unregister_sysctl(void)
prog_attach_iptables(argv[2]);
if (cfg_test_traffic) {
if (signal(SIGINT, finish) == SIG_ERR)
- error(1, errno, "register handler failed");
+ error(1, errno, "register SIGINT handler failed");
+ if (signal(SIGTERM, finish) == SIG_ERR)
+ error(1, errno, "register SIGTERM handler failed");
while (!test_finish) {
print_table();
printf("\n");
setrlimit(RLIMIT_MEMLOCK, &r);
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
if (load_kallsyms()) {
printf("failed to process /proc/kallsyms\n");
return 1;
}
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
/* do sampling */
printf("Sampling at %d Hertz for %d seconds. Ctrl-C also ends.\n",
setrlimit(RLIMIT_MEMLOCK, &r);
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
if (load_kallsyms()) {
printf("failed to process /proc/kallsyms\n");
}
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
/* start 'ping' in the background to have some kfree_skb events */
f = popen("ping -c5 localhost", "r");
fprintf(stderr,
"usage: %s [OPTS] IFINDEX\n\n"
"OPTS:\n"
- " -S use skb-mode\n",
+ " -S use skb-mode\n"
+ " -N enforce native mode\n",
prog);
}
int main(int argc, char **argv)
{
- const char *optstr = "S";
+ const char *optstr = "SN";
char filename[256];
int opt;
case 'S':
xdp_flags |= XDP_FLAGS_SKB_MODE;
break;
+ case 'N':
+ xdp_flags |= XDP_FLAGS_DRV_MODE;
+ break;
default:
usage(basename(argv[0]));
return 1;
}
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
if (set_link_xdp_fd(ifindex, prog_fd[0], xdp_flags) < 0) {
printf("link set xdp fd failed\n");
printf(" -m <dest-MAC> Used in sending the IP Tunneled pkt\n");
printf(" -T <stop-after-X-seconds> Default: 0 (forever)\n");
printf(" -P <IP-Protocol> Default is TCP\n");
+ printf(" -S use skb-mode\n");
+ printf(" -N enforce native mode\n");
printf(" -h Display this help\n");
}
{
unsigned char opt_flags[256] = {};
unsigned int kill_after_s = 0;
- const char *optstr = "i:a:p:s:d:m:T:P:Sh";
+ const char *optstr = "i:a:p:s:d:m:T:P:SNh";
int min_port = 0, max_port = 0;
struct iptnl_info tnl = {};
struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
case 'S':
xdp_flags |= XDP_FLAGS_SKB_MODE;
break;
+ case 'N':
+ xdp_flags |= XDP_FLAGS_DRV_MODE;
+ break;
default:
usage(argv[0]);
return 1;
}
signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
while (min_port <= max_port) {
vip.dport = htons(min_port++);
#
# ==========================================================================
+PHONY := __headers
+__headers:
+
+include scripts/Kbuild.include
+
+srcdir := $(srctree)/$(obj)
+subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
+# caller may set destination dir (when installing to asm/)
+_dst := $(if $(dst),$(dst),$(obj))
+
+# Recursion
+__headers: $(subdirs)
+
+.PHONY: $(subdirs)
+$(subdirs):
+ $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
+
+# Skip header install/check for include/uapi and arch/$(hdr-arch)/include/uapi.
+# We have only sub-directories there.
+skip-inst := $(if $(filter %/uapi,$(obj)),1)
+
+ifeq ($(skip-inst),)
+
# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
kbuild-file := $(srctree)/$(obj)/Kbuild
-include $(kbuild-file)
-# called may set destination dir (when installing to asm/)
-_dst := $(if $(dst),$(dst),$(obj))
-
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
include $(old-kbuild-file)
endif
-include scripts/Kbuild.include
-
installdir := $(INSTALL_HDR_PATH)/$(subst uapi/,,$(_dst))
-srcdir := $(srctree)/$(obj)
gendir := $(objtree)/$(gen)
-subdirs := $(patsubst $(srcdir)/%/.,%,$(wildcard $(srcdir)/*/.))
header-files := $(notdir $(wildcard $(srcdir)/*.h))
header-files += $(notdir $(wildcard $(srcdir)/*.agh))
header-files := $(filter-out $(no-export-headers), $(header-files))
$(PERL) $< $(INSTALL_HDR_PATH)/include $(SRCARCH); \
touch $@
-PHONY += __headersinst __headerscheck
-
ifndef HDRCHECK
# Rules for installing headers
-__headersinst: $(subdirs) $(install-file)
+__headers: $(install-file)
@:
targets += $(install-file)
$(call if_changed,install)
else
-__headerscheck: $(subdirs) $(check-file)
+__headers: $(check-file)
@:
targets += $(check-file)
endif
-# Recursion
-.PHONY: $(subdirs)
-$(subdirs):
- $(Q)$(MAKE) $(hdr-inst)=$(obj)/$@ dst=$(_dst)/$@
-
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard \
$(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
include $(cmd_files)
endif
+endif # skip-inst
+
.PHONY: $(PHONY)
PHONY += FORCE
FORCE: ;
dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
-I$(srctree)/arch/$(SRCARCH)/boot/dts \
- -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \
+ -I$(srctree)/scripts/dtc/include-prefixes \
-I$(srctree)/drivers/of/testcase-data \
-undef -D__DTS__
while (size--)
reg = (reg << 32) | fdt32_to_cpu(*(cells++));
- snprintf(unit_addr, sizeof(unit_addr), "%lx", reg);
+ snprintf(unit_addr, sizeof(unit_addr), "%zx", reg);
if (!streq(unitname, unit_addr))
FAIL(c, dti, "Node %s simple-bus unit address format error, expected \"%s\"",
node->fullpath, unit_addr);
--- /dev/null
+../../../arch/arc/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/arm/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/arm64/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/c6x/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/cris/boot/dts
\ No newline at end of file
--- /dev/null
+../../../include/dt-bindings
\ No newline at end of file
--- /dev/null
+../../../arch/h8300/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/metag/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/microblaze/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/mips/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/nios2/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/openrisc/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/powerpc/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/sh/boot/dts
\ No newline at end of file
--- /dev/null
+../../../arch/xtensa/boot/dts
\ No newline at end of file
pdata->notify_pending = false;
spin_unlock_irq(&pdata->lpe_audio_slock);
- /* runtime PM isn't enabled as default, since it won't save much on
- * BYT/CHT devices; user who want the runtime PM should adjust the
- * power/ontrol and power/autosuspend_delay_ms sysfs entries instead
- */
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
attr.log_size = 0;
attr.log_level = 0;
attr.kern_version = 0;
+ attr.prog_flags = 0;
/*
* Test existence of __NR_bpf and BPF_PROG_LOAD.
*/
#define BPF_F_ALLOW_OVERRIDE (1U << 0)
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT (1U << 0)
+
#define BPF_PSEUDO_MAP_FD 1
/* flags for BPF_MAP_UPDATE_ELEM command */
__u32 log_size; /* size of user buffer */
__aligned_u64 log_buf; /* user supplied buffer */
__u32 kern_version; /* checked when prog_type=kprobe */
+ __u32 prog_flags;
};
struct { /* anonymous struct used by BPF_OBJ_* commands */
* u32 bpf_get_socket_uid(skb)
* Get the owner uid of the socket stored inside sk_buff.
* @skb: pointer to skb
- * Return: uid of the socket owner on success or 0 if the socket pointer
- * inside sk_buff is NULL
+ * Return: uid of the socket owner on success or overflowuid if failed.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
}
+int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
+ size_t insns_cnt, int strict_alignment,
+ const char *license, __u32 kern_version,
+ char *log_buf, size_t log_buf_sz)
+{
+ union bpf_attr attr;
+
+ bzero(&attr, sizeof(attr));
+ attr.prog_type = type;
+ attr.insn_cnt = (__u32)insns_cnt;
+ attr.insns = ptr_to_u64(insns);
+ attr.license = ptr_to_u64(license);
+ attr.log_buf = ptr_to_u64(log_buf);
+ attr.log_size = log_buf_sz;
+ attr.log_level = 2;
+ log_buf[0] = 0;
+ attr.kern_version = kern_version;
+ attr.prog_flags = strict_alignment ? BPF_F_STRICT_ALIGNMENT : 0;
+
+ return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
+}
+
int bpf_map_update_elem(int fd, const void *key, const void *value,
__u64 flags)
{
size_t insns_cnt, const char *license,
__u32 kern_version, char *log_buf,
size_t log_buf_sz);
+int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
+ size_t insns_cnt, int strict_alignment,
+ const char *license, __u32 kern_version,
+ char *log_buf, size_t log_buf_sz);
int bpf_map_update_elem(int fd, const void *key, const void *value,
__u64 flags);
--- /dev/null
+acpidbg
+acpidump
+ec
+include
CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../include
LDLIBS += -lcap -lelf
-TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs
+TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
+ test_align
TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o
CLANG ?= clang
%.o: %.c
- $(CLANG) -I. -I../../../include/uapi -I../../../../samples/bpf/ \
+ $(CLANG) -I. -I./include/uapi -I../../../include/uapi \
+ -I../../../../samples/bpf/ \
-Wno-compare-distinct-pointer-types \
-O2 -target bpf -c $< -o $@
--- /dev/null
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+/* copied from linux:include/uapi/linux/types.h */
+#define __bitwise
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#endif /* _UAPI_LINUX_TYPES_H */
--- /dev/null
+#include <asm/types.h>
+#include <linux/types.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include <stddef.h>
+#include <stdbool.h>
+
+#include <linux/unistd.h>
+#include <linux/filter.h>
+#include <linux/bpf_perf_event.h>
+#include <linux/bpf.h>
+
+#include <bpf/bpf.h>
+
+#include "../../../include/linux/filter.h"
+
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+#define MAX_INSNS 512
+#define MAX_MATCHES 16
+
+struct bpf_align_test {
+ const char *descr;
+ struct bpf_insn insns[MAX_INSNS];
+ enum {
+ UNDEF,
+ ACCEPT,
+ REJECT
+ } result;
+ enum bpf_prog_type prog_type;
+ const char *matches[MAX_MATCHES];
+};
+
+static struct bpf_align_test tests[] = {
+ {
+ .descr = "mov",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_3, 8),
+ BPF_MOV64_IMM(BPF_REG_3, 16),
+ BPF_MOV64_IMM(BPF_REG_3, 32),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ "2: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "3: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "4: R1=ctx R3=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "5: R1=ctx R3=imm32,min_value=32,max_value=32,min_align=32 R10=fp",
+ },
+ },
+ {
+ .descr = "shift",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_4, 32),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R10=fp",
+ "2: R1=ctx R3=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ "3: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "4: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "5: R1=ctx R3=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "6: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R10=fp",
+ "7: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm32,min_value=32,max_value=32,min_align=32 R10=fp",
+ "8: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "9: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "10: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "11: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "addsub",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_4, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "2: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=4 R10=fp",
+ "3: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R10=fp",
+ "4: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "5: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm12,min_value=12,max_value=12,min_align=4 R10=fp",
+ "6: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm14,min_value=14,max_value=14,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "mul",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 7),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 2),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm7,min_value=7,max_value=7,min_align=1 R10=fp",
+ "2: R1=ctx R3=imm7,min_value=7,max_value=7,min_align=1 R10=fp",
+ "3: R1=ctx R3=imm14,min_value=14,max_value=14,min_align=2 R10=fp",
+ "4: R1=ctx R3=imm56,min_value=56,max_value=56,min_align=4 R10=fp",
+ },
+ },
+
+#define PREP_PKT_POINTERS \
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, \
+ offsetof(struct __sk_buff, data)), \
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, \
+ offsetof(struct __sk_buff, data_end))
+
+#define LOAD_UNKNOWN(DST_REG) \
+ PREP_PKT_POINTERS, \
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), \
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8), \
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_0, 1), \
+ BPF_EXIT_INSN(), \
+ BPF_LDX_MEM(BPF_B, DST_REG, BPF_REG_2, 0)
+
+ {
+ .descr = "unknown shift",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_3),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ LOAD_UNKNOWN(BPF_REG_4),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_4, 5),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R10=fp",
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv55,min_align=2 R10=fp",
+ "9: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv54,min_align=4 R10=fp",
+ "10: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv53,min_align=8 R10=fp",
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv52,min_align=16 R10=fp",
+ "18: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv56 R10=fp",
+ "19: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv51,min_align=32 R10=fp",
+ "20: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv52,min_align=16 R10=fp",
+ "21: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv53,min_align=8 R10=fp",
+ "22: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv54,min_align=4 R10=fp",
+ "23: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv55,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "unknown mul",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_3),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 1),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 2),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 4),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 8),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R10=fp",
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "9: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv55,min_align=1 R10=fp",
+ "10: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv54,min_align=2 R10=fp",
+ "12: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "13: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv53,min_align=4 R10=fp",
+ "14: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "15: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv52,min_align=8 R10=fp",
+ "16: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv50,min_align=8 R10=fp"
+ },
+ },
+ {
+ .descr = "packet const offset",
+ .insns = {
+ PREP_PKT_POINTERS,
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+
+ /* Skip over ethernet header. */
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 1),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 2),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 3),
+ BPF_LDX_MEM(BPF_H, BPF_REG_4, BPF_REG_5, 0),
+ BPF_LDX_MEM(BPF_H, BPF_REG_4, BPF_REG_5, 2),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "4: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R5=pkt(id=0,off=0,r=0) R10=fp",
+ "5: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R5=pkt(id=0,off=14,r=0) R10=fp",
+ "6: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R4=pkt(id=0,off=14,r=0) R5=pkt(id=0,off=14,r=0) R10=fp",
+ "10: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv56 R5=pkt(id=0,off=14,r=18) R10=fp",
+ "14: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv48 R5=pkt(id=0,off=14,r=18) R10=fp",
+ "15: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv48 R5=pkt(id=0,off=14,r=18) R10=fp",
+ },
+ },
+ {
+ .descr = "packet variable offset",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_6),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_6, 2),
+
+ /* First, add a constant to the R5 packet pointer,
+ * then a variable with a known alignment.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ /* Now, test in the other direction. Adding first
+ * the variable offset to R5, then the constant.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ /* Test multiple accumulations of unknown values
+ * into a packet pointer.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 4),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ /* Calculated offset in R6 has unknown value, but known
+ * alignment of 4.
+ */
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R6=inv54,min_align=4 R10=fp",
+
+ /* Offset is added to packet pointer R5, resulting in known
+ * auxiliary alignment and offset.
+ */
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R5=pkt(id=1,off=0,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (0) +
+ * reg->aux_off (14) which is 16. Then the variable
+ * offset is considered using reg->aux_off_align which
+ * is 4 and meets the load's requirements.
+ */
+ "15: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=1,off=4,r=4),aux_off=14,aux_off_align=4 R5=pkt(id=1,off=0,r=4),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+
+ /* Variable offset is added to R5 packet pointer,
+ * resulting in auxiliary alignment of 4.
+ */
+ "18: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off=14,aux_off_align=4 R5=pkt(id=2,off=0,r=0),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* Constant offset is added to R5, resulting in
+ * reg->off of 14.
+ */
+ "19: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off=14,aux_off_align=4 R5=pkt(id=2,off=14,r=0),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (14) which
+ * is 16. Then the variable offset is considered using
+ * reg->aux_off_align which is 4 and meets the load's
+ * requirements.
+ */
+ "23: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=2,off=18,r=18),aux_off_align=4 R5=pkt(id=2,off=14,r=18),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* Constant offset is added to R5 packet pointer,
+ * resulting in reg->off value of 14.
+ */
+ "26: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=0,off=14,r=8) R6=inv54,min_align=4 R10=fp",
+ /* Variable offset is added to R5, resulting in an
+ * auxiliary offset of 14, and an auxiliary alignment of 4.
+ */
+ "27: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=3,off=0,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* Constant is added to R5 again, setting reg->off to 4. */
+ "28: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=3,off=4,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* And once more we add a variable, which causes an accumulation
+ * of reg->off into reg->aux_off_align, with resulting value of
+ * 18. The auxiliary alignment stays at 4.
+ */
+ "29: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=4,off=0,r=0),aux_off=18,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (0) +
+ * reg->aux_off (18) which is 20. Then the variable offset
+ * is considered using reg->aux_off_align which is 4 and meets
+ * the load's requirements.
+ */
+ "33: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=4,off=4,r=4),aux_off=18,aux_off_align=4 R5=pkt(id=4,off=0,r=4),aux_off=18,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ },
+ },
+};
+
+static int probe_filter_length(const struct bpf_insn *fp)
+{
+ int len;
+
+ for (len = MAX_INSNS - 1; len > 0; --len)
+ if (fp[len].code != 0 || fp[len].imm != 0)
+ break;
+ return len + 1;
+}
+
+static char bpf_vlog[32768];
+
+static int do_test_single(struct bpf_align_test *test)
+{
+ struct bpf_insn *prog = test->insns;
+ int prog_type = test->prog_type;
+ int prog_len, i;
+ int fd_prog;
+ int ret;
+
+ prog_len = probe_filter_length(prog);
+ fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
+ prog, prog_len, 1, "GPL", 0,
+ bpf_vlog, sizeof(bpf_vlog));
+ if (fd_prog < 0) {
+ printf("Failed to load program.\n");
+ printf("%s", bpf_vlog);
+ ret = 1;
+ } else {
+ ret = 0;
+ for (i = 0; i < MAX_MATCHES; i++) {
+ const char *t, *m = test->matches[i];
+
+ if (!m)
+ break;
+ t = strstr(bpf_vlog, m);
+ if (!t) {
+ printf("Failed to find match: %s\n", m);
+ ret = 1;
+ printf("%s", bpf_vlog);
+ break;
+ }
+ }
+ close(fd_prog);
+ }
+ return ret;
+}
+
+static int do_test(unsigned int from, unsigned int to)
+{
+ int all_pass = 0;
+ int all_fail = 0;
+ unsigned int i;
+
+ for (i = from; i < to; i++) {
+ struct bpf_align_test *test = &tests[i];
+ int fail;
+
+ printf("Test %3d: %s ... ",
+ i, test->descr);
+ fail = do_test_single(test);
+ if (fail) {
+ all_fail++;
+ printf("FAIL\n");
+ } else {
+ all_pass++;
+ printf("PASS\n");
+ }
+ }
+ printf("Results: %d pass %d fail\n",
+ all_pass, all_fail);
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int from = 0, to = ARRAY_SIZE(tests);
+
+ if (argc == 3) {
+ unsigned int l = atoi(argv[argc - 2]);
+ unsigned int u = atoi(argv[argc - 1]);
+
+ if (l < to && u < to) {
+ from = l;
+ to = u + 1;
+ }
+ } else if (argc == 2) {
+ unsigned int t = atoi(argv[argc - 1]);
+
+ if (t < to) {
+ from = t;
+ to = t + 1;
+ }
+ }
+ return do_test(from, to);
+}
* License as published by the Free Software Foundation.
*/
#include <stddef.h>
+#include <string.h>
#include <linux/bpf.h>
#include <linux/if_ether.h>
#include <linux/if_packet.h>
;;
--verbose|-v|-vv)
VERBOSE=$((VERBOSE + 1))
- [ $1 == '-vv' ] && VERBOSE=$((VERBOSE + 1))
+ [ $1 = '-vv' ] && VERBOSE=$((VERBOSE + 1))
shift 1
;;
--debug|-d)
e=`cat $EVENT_ENABLE`
if [ "$e" != $val ]; then
echo "Expected $val but found $e"
- exit -1
+ exit 1
fi
}
echo > set_ftrace_filter
grep -v '^#' set_ftrace_filter | while read t; do
tr=`echo $t | cut -d: -f2`
- if [ "$tr" == "" ]; then
+ if [ "$tr" = "" ]; then
continue
fi
- if [ $tr == "enable_event" -o $tr == "disable_event" ]; then
+ if [ $tr = "enable_event" -o $tr = "disable_event" ]; then
tr=`echo $t | cut -d: -f1-4`
limit=`echo $t | cut -d: -f5`
else
if [ -d foo ]; then
fail "foo still exists"
fi
-exit 0
-
+mkdir foo
+echo "schedule:enable_event:sched:sched_switch" > foo/set_ftrace_filter
+rmdir foo
+if [ -d foo ]; then
+ fail "foo still exists"
+fi
instance_slam() {
tm-signal-context-chk-gpr
tm-signal-context-chk-vmx
tm-signal-context-chk-vsx
+tm-vmx-unavail
tm-signal-context-chk-vmx tm-signal-context-chk-vsx
TEST_GEN_PROGS := tm-resched-dscr tm-syscall tm-signal-msr-resv tm-signal-stack \
- tm-vmxcopy tm-fork tm-tar tm-tmspr $(SIGNAL_CONTEXT_CHK_TESTS)
+ tm-vmxcopy tm-fork tm-tar tm-tmspr tm-vmx-unavail \
+ $(SIGNAL_CONTEXT_CHK_TESTS)
include ../../lib.mk
$(OUTPUT)/tm-syscall: tm-syscall-asm.S
$(OUTPUT)/tm-syscall: CFLAGS += -I../../../../../usr/include
$(OUTPUT)/tm-tmspr: CFLAGS += -pthread
+$(OUTPUT)/tm-vmx-unavail: CFLAGS += -pthread -m64
SIGNAL_CONTEXT_CHK_TESTS := $(patsubst %,$(OUTPUT)/%,$(SIGNAL_CONTEXT_CHK_TESTS))
$(SIGNAL_CONTEXT_CHK_TESTS): tm-signal.S
--- /dev/null
+/*
+ * Copyright 2017, Michael Neuling, IBM Corp.
+ * Licensed under GPLv2.
+ * Original: Breno Leitao <brenohl@br.ibm.com> &
+ * Gustavo Bueno Romero <gromero@br.ibm.com>
+ * Edited: Michael Neuling
+ *
+ * Force VMX unavailable during a transaction and see if it corrupts
+ * the checkpointed VMX register state after the abort.
+ */
+
+#include <inttypes.h>
+#include <htmintrin.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <pthread.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <pthread.h>
+
+#include "tm.h"
+#include "utils.h"
+
+int passed;
+
+void *worker(void *unused)
+{
+ __int128 vmx0;
+ uint64_t texasr;
+
+ asm goto (
+ "li 3, 1;" /* Stick non-zero value in VMX0 */
+ "std 3, 0(%[vmx0_ptr]);"
+ "lvx 0, 0, %[vmx0_ptr];"
+
+ /* Wait here a bit so we get scheduled out 255 times */
+ "lis 3, 0x3fff;"
+ "1: ;"
+ "addi 3, 3, -1;"
+ "cmpdi 3, 0;"
+ "bne 1b;"
+
+ /* Kernel will hopefully turn VMX off now */
+
+ "tbegin. ;"
+ "beq failure;"
+
+ /* Cause VMX unavail. Any VMX instruction */
+ "vaddcuw 0,0,0;"
+
+ "tend. ;"
+ "b %l[success];"
+
+ /* Check VMX0 sanity after abort */
+ "failure: ;"
+ "lvx 1, 0, %[vmx0_ptr];"
+ "vcmpequb. 2, 0, 1;"
+ "bc 4, 24, %l[value_mismatch];"
+ "b %l[value_match];"
+ :
+ : [vmx0_ptr] "r"(&vmx0)
+ : "r3"
+ : success, value_match, value_mismatch
+ );
+
+ /* HTM aborted and VMX0 is corrupted */
+value_mismatch:
+ texasr = __builtin_get_texasr();
+
+ printf("\n\n==============\n\n");
+ printf("Failure with error: %lx\n", _TEXASR_FAILURE_CODE(texasr));
+ printf("Summary error : %lx\n", _TEXASR_FAILURE_SUMMARY(texasr));
+ printf("TFIAR exact : %lx\n\n", _TEXASR_TFIAR_EXACT(texasr));
+
+ passed = 0;
+ return NULL;
+
+ /* HTM aborted but VMX0 is correct */
+value_match:
+// printf("!");
+ return NULL;
+
+success:
+// printf(".");
+ return NULL;
+}
+
+int tm_vmx_unavail_test()
+{
+ int threads;
+ pthread_t *thread;
+
+ SKIP_IF(!have_htm());
+
+ passed = 1;
+
+ threads = sysconf(_SC_NPROCESSORS_ONLN) * 4;
+ thread = malloc(sizeof(pthread_t)*threads);
+ if (!thread)
+ return EXIT_FAILURE;
+
+ for (uint64_t i = 0; i < threads; i++)
+ pthread_create(&thread[i], NULL, &worker, NULL);
+
+ for (uint64_t i = 0; i < threads; i++)
+ pthread_join(thread[i], NULL);
+
+ free(thread);
+
+ return passed ? EXIT_SUCCESS : EXIT_FAILURE;
+}
+
+
+int main(int argc, char **argv)
+{
+ return test_harness(tm_vmx_unavail_test, "tm_vmx_unavail_test");
+}
#include <asm/kvm_hyp.h>
#define vtr_to_max_lr_idx(v) ((v) & 0xf)
-#define vtr_to_nr_pri_bits(v) (((u32)(v) >> 29) + 1)
+#define vtr_to_nr_pre_bits(v) (((u32)(v) >> 26) + 1)
static u64 __hyp_text __gic_v3_get_lr(unsigned int lr)
{
if (used_lrs) {
int i;
- u32 nr_pri_bits;
+ u32 nr_pre_bits;
cpu_if->vgic_elrsr = read_gicreg(ICH_ELSR_EL2);
write_gicreg(0, ICH_HCR_EL2);
val = read_gicreg(ICH_VTR_EL2);
- nr_pri_bits = vtr_to_nr_pri_bits(val);
+ nr_pre_bits = vtr_to_nr_pre_bits(val);
for (i = 0; i < used_lrs; i++) {
if (cpu_if->vgic_elrsr & (1 << i))
__gic_v3_set_lr(0, i);
}
- switch (nr_pri_bits) {
+ switch (nr_pre_bits) {
case 7:
cpu_if->vgic_ap0r[3] = read_gicreg(ICH_AP0R3_EL2);
cpu_if->vgic_ap0r[2] = read_gicreg(ICH_AP0R2_EL2);
cpu_if->vgic_ap0r[0] = read_gicreg(ICH_AP0R0_EL2);
}
- switch (nr_pri_bits) {
+ switch (nr_pre_bits) {
case 7:
cpu_if->vgic_ap1r[3] = read_gicreg(ICH_AP1R3_EL2);
cpu_if->vgic_ap1r[2] = read_gicreg(ICH_AP1R2_EL2);
struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
u64 used_lrs = vcpu->arch.vgic_cpu.used_lrs;
u64 val;
- u32 nr_pri_bits;
+ u32 nr_pre_bits;
int i;
/*
}
val = read_gicreg(ICH_VTR_EL2);
- nr_pri_bits = vtr_to_nr_pri_bits(val);
+ nr_pre_bits = vtr_to_nr_pre_bits(val);
if (used_lrs) {
write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
- switch (nr_pri_bits) {
+ switch (nr_pre_bits) {
case 7:
write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2);
write_gicreg(cpu_if->vgic_ap0r[2], ICH_AP0R2_EL2);
write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2);
}
- switch (nr_pri_bits) {
+ switch (nr_pre_bits) {
case 7:
write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
assert_spin_locked(&kvm->mmu_lock);
pgd = kvm->arch.pgd + stage2_pgd_index(addr);
do {
+ /*
+ * Make sure the page table is still active, as another thread
+ * could have possibly freed the page table, while we released
+ * the lock.
+ */
+ if (!READ_ONCE(kvm->arch.pgd))
+ break;
next = stage2_pgd_addr_end(addr, end);
if (!stage2_pgd_none(*pgd))
unmap_stage2_puds(kvm, pgd, addr, next);
* Walks the level-1 page table pointed to by kvm->arch.pgd and frees all
* underlying level-2 and level-3 tables before freeing the actual level-1 table
* and setting the struct pointer to NULL.
- *
- * Note we don't need locking here as this is only called when the VM is
- * destroyed, which can only be done once.
*/
void kvm_free_stage2_pgd(struct kvm *kvm)
{
- if (kvm->arch.pgd == NULL)
- return;
+ void *pgd = NULL;
spin_lock(&kvm->mmu_lock);
- unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+ if (kvm->arch.pgd) {
+ unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+ pgd = READ_ONCE(kvm->arch.pgd);
+ kvm->arch.pgd = NULL;
+ }
spin_unlock(&kvm->mmu_lock);
/* Free the HW pgd, one page at a time */
- free_pages_exact(kvm->arch.pgd, S2_PGD_SIZE);
- kvm->arch.pgd = NULL;
+ if (pgd)
+ free_pages_exact(pgd, S2_PGD_SIZE);
}
static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
* large. Otherwise, we may see kernel panics with
* CONFIG_DETECT_HUNG_TASK, CONFIG_LOCKUP_DETECTOR,
* CONFIG_LOCKDEP. Additionally, holding the lock too long
- * will also starve other vCPUs.
+ * will also starve other vCPUs. We have to also make sure
+ * that the page tables are not freed while we released
+ * the lock.
*/
- if (need_resched() || spin_needbreak(&kvm->mmu_lock))
- cond_resched_lock(&kvm->mmu_lock);
-
+ cond_resched_lock(&kvm->mmu_lock);
+ if (!READ_ONCE(kvm->arch.pgd))
+ break;
next = stage2_pgd_addr_end(addr, end);
if (stage2_pgd_present(*pgd))
stage2_wp_puds(pgd, addr, next);
* If we are creating a VCPU with a GICv3 we must also register the
* KVM io device for the redistributor that belongs to this VCPU.
*/
- if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3)
+ if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+ mutex_lock(&vcpu->kvm->lock);
ret = vgic_register_redist_iodev(vcpu);
+ mutex_unlock(&vcpu->kvm->lock);
+ }
return ret;
}
if (!vgic_v3_check_base(kvm))
return -EINVAL;
- rd_base = vgic->vgic_redist_base + kvm_vcpu_get_idx(vcpu) * SZ_64K * 2;
+ rd_base = vgic->vgic_redist_base + vgic->vgic_redist_free_offset;
sgi_base = rd_base + SZ_64K;
kvm_iodevice_init(&rd_dev->dev, &kvm_io_gic_ops);
mutex_lock(&kvm->slots_lock);
ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, sgi_base,
SZ_64K, &sgi_dev->dev);
- mutex_unlock(&kvm->slots_lock);
- if (ret)
+ if (ret) {
kvm_io_bus_unregister_dev(kvm, KVM_MMIO_BUS,
&rd_dev->dev);
+ goto out;
+ }
+ vgic->vgic_redist_free_offset += 2 * SZ_64K;
+out:
+ mutex_unlock(&kvm->slots_lock);
return ret;
}
if (ret) {
/* The current c failed, so we start with the previous one. */
+ mutex_lock(&kvm->slots_lock);
for (c--; c >= 0; c--) {
vcpu = kvm_get_vcpu(kvm, c);
vgic_unregister_redist_iodev(vcpu);
}
+ mutex_unlock(&kvm->slots_lock);
}
return ret;
if (irq->hw) {
val |= GICH_LR_HW;
val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT;
+ /*
+ * Never set pending+active on a HW interrupt, as the
+ * pending state is kept at the physical distributor
+ * level.
+ */
+ if (irq->active && irq_is_pending(irq))
+ val &= ~GICH_LR_PENDING_BIT;
} else {
if (irq->config == VGIC_CONFIG_LEVEL)
val |= GICH_LR_EOI;
if (irq->hw) {
val |= ICH_LR_HW;
val |= ((u64)irq->hwintid) << ICH_LR_PHYS_ID_SHIFT;
+ /*
+ * Never set pending+active on a HW interrupt, as the
+ * pending state is kept at the physical distributor
+ * level.
+ */
+ if (irq->active && irq_is_pending(irq))
+ val &= ~ICH_LR_PENDING_BIT;
} else {
if (irq->config == VGIC_CONFIG_LEVEL)
val |= ICH_LR_EOI;
git.samba.org / sfrench / cifs-2.6.git / commitdiff