[media] rtl2832: save some data space by using a macro instead of a table

Instead of using a table for reg bitmask, use a macro. This should save
some data segment space.

Cc: Thomas Mair <thomas.mair86@googlemail.com>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/frontends/rtl2832.c b/drivers/media/dvb/frontends/rtl2832.c
index d0cbe27f979e74ac2e8133b422806a78ab47a01a..2da592fb38adc0c03244fb75d4dd51d9ca40a6ff 100644 (file)
--- a/drivers/media/dvb/frontends/rtl2832.c
+++ b/drivers/media/dvb/frontends/rtl2832.c
@@ -19,47 +19,13 @@
  */
 
 #include "rtl2832_priv.h"
-
+#include <linux/bitops.h>
 
 int rtl2832_debug;
 module_param_named(debug, rtl2832_debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
-
-static const int reg_mask[32] = {
-       0x00000001,
-       0x00000003,
-       0x00000007,
-       0x0000000f,
-       0x0000001f,
-       0x0000003f,
-       0x0000007f,
-       0x000000ff,
-       0x000001ff,
-       0x000003ff,
-       0x000007ff,
-       0x00000fff,
-       0x00001fff,
-       0x00003fff,
-       0x00007fff,
-       0x0000ffff,
-       0x0001ffff,
-       0x0003ffff,
-       0x0007ffff,
-       0x000fffff,
-       0x001fffff,
-       0x003fffff,
-       0x007fffff,
-       0x00ffffff,
-       0x01ffffff,
-       0x03ffffff,
-       0x07ffffff,
-       0x0fffffff,
-       0x1fffffff,
-       0x3fffffff,
-       0x7fffffff,
-       0xffffffff
-};
+#define REG_MASK(b) (BIT(b + 1) - 1)
 
 static const struct rtl2832_reg_entry registers[] = {
        [DVBT_SOFT_RST]         = {0x1, 0x1,   2, 2},
@@ -317,7 +283,7 @@ int rtl2832_rd_demod_reg(struct rtl2832_priv *priv, int reg, u32 *val)
        page = registers[reg].page;
 
        len = (msb >> 3) + 1;
-       mask = reg_mask[msb - lsb];
+       mask = REG_MASK(msb - lsb);
 
        ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);
        if (ret)
@@ -359,7 +325,7 @@ int rtl2832_wr_demod_reg(struct rtl2832_priv *priv, int reg, u32 val)
        page = registers[reg].page;
 
        len = (msb >> 3) + 1;
-       mask = reg_mask[msb - lsb];
+       mask = REG_MASK(msb - lsb);
 
 
        ret = rtl2832_rd_regs(priv, reg_start_addr, page, &reading[0], len);