radeonfb: Whack the PCI PM register until it sticks
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>
Thu, 19 Mar 2009 22:22:30 +0000 (09:22 +1100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sun, 22 Mar 2009 18:08:53 +0000 (11:08 -0700)
This fixes a regression introduced when we switched to using the core
pci_set_power_state().  The chip seems to need the state to be written
over and over again until it sticks, so we do that.

Note that the code is a bit blunt, without timeout, etc...  but that's
pretty much because I put back in there the code exactly as it used to
be before the regression.  I still add a call to pci_set_power_state()
at the end so that ACPI gets called appropriately on x86.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Raymond Wooninck <tittiatcoke@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/aty/radeon_pm.c

index 81603f85e17ee7dfb13031fcec2999afb3389255..c6d7cc76516ff116edfff3643156fb5a18d19e7a 100644 (file)
@@ -2507,6 +2507,25 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
 
 #endif /* CONFIG_PPC_OF */
 
+static void radeonfb_whack_power_state(struct radeonfb_info *rinfo, pci_power_t state)
+{
+       u16 pwr_cmd;
+
+       for (;;) {
+               pci_read_config_word(rinfo->pdev,
+                                    rinfo->pm_reg+PCI_PM_CTRL,
+                                    &pwr_cmd);
+               if (pwr_cmd & 2)
+                       break;
+               pwr_cmd = (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2;
+               pci_write_config_word(rinfo->pdev,
+                                     rinfo->pm_reg+PCI_PM_CTRL,
+                                     pwr_cmd);
+               msleep(500);
+       }
+       rinfo->pdev->current_state = state;
+}
+
 static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
 {
        u32 tmp;
@@ -2558,6 +2577,11 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
                /* Switch PCI power management to D2. */
                pci_disable_device(rinfo->pdev);
                pci_save_state(rinfo->pdev);
+               /* The chip seems to need us to whack the PM register
+                * repeatedly until it sticks. We do that -prior- to
+                * calling pci_set_power_state()
+                */
+               radeonfb_whack_power_state(rinfo, PCI_D2);
                pci_set_power_state(rinfo->pdev, PCI_D2);
        } else {
                printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",