X-Git-Url: http://git.samba.org/samba.git/?a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fsun7i-a20-pcduino3-nano.dts;fp=arch%2Farm%2Fboot%2Fdts%2Fsun7i-a20-pcduino3-nano.dts;h=0000000000000000000000000000000000000000;hb=724ba6751532055db75992fc6ae21c3e322e94a7;hp=e40ecb48d726e7f09a7defae47419e0c62fb6abc;hpb=6a1d798feb65d2a67e6e2cafb0b0e4f430603226;p=sfrench%2Fcifs-2.6.git

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
deleted file mode 100644
index e40ecb48d726..000000000000
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright 2015-2020 Adam Sampson <ats@offog.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "LinkSprite pcDuino3 Nano";
-	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	hdmi-connector {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&hdmi_out_con>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-3 {
-			label = "pcduino3-nano:green:usr1";
-			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
-		};
-
-		led-4 {
-			label = "pcduino3-nano:green:usr2";
-			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
-		};
-	};
-};
-
-&ahci {
-	target-supply = <&reg_ahci_5v>;
-	status = "okay";
-};
-
-&codec {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&gmac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_rgmii_pins>;
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_con: endpoint {
-		remote-endpoint = <&hdmi_con_in>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&ir0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pin>;
-	status = "okay";
-};
-
-&gmac_mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&reg_ahci_5v {
-	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-	status = "okay";
-};
-
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-/* A single regulator (U24) powers both USB host ports. */
-&reg_usb1_vbus {
-	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pb_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};