#ifndef __R8192UDM_H__
#define __R8192UDM_H__
-
/*--------------------------Define Parameters-------------------------------*/
-#define DM_DIG_THRESH_HIGH 40
-#define DM_DIG_THRESH_LOW 35
+#define DM_DIG_THRESH_HIGH 40
+#define DM_DIG_THRESH_LOW 35
-#define DM_DIG_HIGH_PWR_THRESH_HIGH 75
-#define DM_DIG_HIGH_PWR_THRESH_LOW 70
+#define DM_DIG_HIGH_PWR_THRESH_HIGH 75
+#define DM_DIG_HIGH_PWR_THRESH_LOW 70
-#define BW_AUTO_SWITCH_HIGH_LOW 25
-#define BW_AUTO_SWITCH_LOW_HIGH 30
+#define BW_AUTO_SWITCH_HIGH_LOW 25
+#define BW_AUTO_SWITCH_LOW_HIGH 30
-#define DM_DIG_BACKOFF 12
-#define DM_DIG_MAX 0x36
-#define DM_DIG_MIN 0x1c
-#define DM_DIG_MIN_NETCORE 0x12
+#define DM_DIG_BACKOFF 12
+#define DM_DIG_MAX 0x36
+#define DM_DIG_MIN 0x1c
+#define DM_DIG_MIN_NETCORE 0x12
-#define RX_PATH_SELECTION_SS_TH_LOW 30
-#define RX_PATH_SELECTION_DIFF_TH 18
+#define RX_PATH_SELECTION_SS_TH_LOW 30
+#define RX_PATH_SELECTION_DIFF_TH 18
-#define RATE_ADAPTIVE_TH_HIGH 50
-#define RATE_ADAPTIVE_TH_LOW_20M 30
-#define RATE_ADAPTIVE_TH_LOW_40M 10
-#define VERY_LOW_RSSI 15
-#define CTS_TO_SELF_TH_VAL 30
+#define RATE_ADAPTIVE_TH_HIGH 50
+#define RATE_ADAPTIVE_TH_LOW_20M 30
+#define RATE_ADAPTIVE_TH_LOW_40M 10
+#define VERY_LOW_RSSI 15
+#define CTS_TO_SELF_TH_VAL 30
/* defined by vivi, for tx power track */
-#define E_FOR_TX_POWER_TRACK 300
+#define E_FOR_TX_POWER_TRACK 300
/* Dynamic Tx Power Control Threshold */
-#define TX_POWER_NEAR_FIELD_THRESH_HIGH 68
-#define TX_POWER_NEAR_FIELD_THRESH_LOW 62
+#define TX_POWER_NEAR_FIELD_THRESH_HIGH 68
+#define TX_POWER_NEAR_FIELD_THRESH_LOW 62
/* added by amy for atheros AP */
#define TX_POWER_ATHEROAP_THRESH_HIGH 78
-#define TX_POWER_ATHEROAP_THRESH_LOW 72
+#define TX_POWER_ATHEROAP_THRESH_LOW 72
/* defined by vivi, for showing on UI */
-#define CURRENT_TX_RATE_REG 0x1b8
-#define INITIAL_TX_RATE_REG 0x1b9
-#define TX_RETRY_COUNT_REG 0x1ac
-#define REG_C38_TH 20
+#define CURRENT_TX_RATE_REG 0x1b8
+#define INITIAL_TX_RATE_REG 0x1b9
+#define TX_RETRY_COUNT_REG 0x1ac
+#define REG_C38_TH 20
/*--------------------------Define Parameters-------------------------------*/
-
/*------------------------------Define structure----------------------------*/
enum dig_algorithm {
enum dig_connect {
DIG_DISCONNECT = 0,
- DIG_CONNECT = 1,
+ DIG_CONNECT = 1,
};
enum dig_pkt_detection_threshold {
- DIG_PD_AT_LOW_POWER = 0,
+ DIG_PD_AT_LOW_POWER = 0,
DIG_PD_AT_NORMAL_POWER = 1,
- DIG_PD_AT_HIGH_POWER = 2,
+ DIG_PD_AT_HIGH_POWER = 2,
};
enum dig_cck_cs_ratio_state {
- DIG_CS_RATIO_LOWER = 0,
+ DIG_CS_RATIO_LOWER = 0,
DIG_CS_RATIO_HIGHER = 1,
};
/* 2007/10/04 MH Define upper and lower threshold of DIG enable or disable. */
struct dig {
- u8 dig_enable_flag;
- enum dig_algorithm dig_algorithm;
- u8 dig_algorithm_switch;
+ u8 dig_enable_flag;
+ enum dig_algorithm dig_algorithm;
+ u8 dig_algorithm_switch;
- long rssi_low_thresh;
- long rssi_high_thresh;
+ long rssi_low_thresh;
+ long rssi_high_thresh;
- long rssi_high_power_lowthresh;
- long rssi_high_power_highthresh;
+ long rssi_high_power_lowthresh;
+ long rssi_high_power_highthresh;
- enum dynamic_init_gain_state dig_state;
- enum dynamic_init_gain_state dig_highpwr_state;
- enum dig_connect cur_connect_state;
- enum dig_connect pre_connect_state;
+ enum dynamic_init_gain_state dig_state;
+ enum dynamic_init_gain_state dig_highpwr_state;
+ enum dig_connect cur_connect_state;
+ enum dig_connect pre_connect_state;
- enum dig_pkt_detection_threshold curpd_thstate;
- enum dig_pkt_detection_threshold prepd_thstate;
- enum dig_cck_cs_ratio_state curcs_ratio_state;
- enum dig_cck_cs_ratio_state precs_ratio_state;
+ enum dig_pkt_detection_threshold curpd_thstate;
+ enum dig_pkt_detection_threshold prepd_thstate;
+ enum dig_cck_cs_ratio_state curcs_ratio_state;
+ enum dig_cck_cs_ratio_state precs_ratio_state;
- u32 pre_ig_value;
- u32 cur_ig_value;
+ u32 pre_ig_value;
+ u32 cur_ig_value;
- u8 backoff_val;
- u8 rx_gain_range_min;
+ u8 backoff_val;
+ u8 rx_gain_range_min;
- long rssi_val;
+ long rssi_val;
};
enum cck_rx_path_method {
};
struct dynamic_rx_path_sel {
- enum cck_rx_path_method cck_method;
- u8 cck_rx_path;
+ enum cck_rx_path_method cck_method;
+ u8 cck_rx_path;
- u8 disabled_rf;
+ u8 disabled_rf;
- u8 rf_rssi[4];
- u8 rf_enable_rssi_th[4];
- long cck_pwdb_sta[4];
+ u8 rf_rssi[4];
+ u8 rf_enable_rssi_th[4];
+ long cck_pwdb_sta[4];
};
struct tx_config_cmd {
- u32 cmd_op; /* Command packet type. */
- u32 cmd_length; /* Command packet length. */
- u32 cmd_value;
+ u32 cmd_op; /* Command packet type. */
+ u32 cmd_length; /* Command packet length. */
+ u32 cmd_value;
};
/*------------------------------Define structure----------------------------*/
-
/*------------------------Export global variable----------------------------*/
extern struct dig dm_digtable;
extern u8 dm_shadow[16][256];
/*------------------------Export global variable----------------------------*/
-
/*------------------------Export Marco Definition---------------------------*/
/*------------------------Export Marco Definition---------------------------*/
-
/*--------------------------Exported Function prototype---------------------*/
void init_hal_dm(struct net_device *dev);
void deinit_hal_dm(struct net_device *dev);
void dm_initialize_txpower_tracking(struct net_device *dev);
/*--------------------------Exported Function prototype---------------------*/
-
#endif /*__R8192UDM_H__ */
-
/* End of r8192U_dm.h */
git.samba.org / sfrench / cifs-2.6.git / blobdiff