#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
-static struct usb_device_id rtl8192_usb_id_tbl[] = {
+static const struct usb_device_id rtl8192_usb_id_tbl[] = {
/* Realtek */
{USB_DEVICE(0x0bda, 0x8192)},
{USB_DEVICE(0x0bda, 0x8709)},
skb->len, rtl8192_tx_isr, skb);
status = usb_submit_urb(tx_urb, GFP_ATOMIC);
- if (!status){
-//we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
+ if (!status) {
+ /*
+ * we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted.
+ * Otherwise, it will be halt to wait for another packet. WB. 2008.08.27
+ */
bool bSend0Byte = false;
u8 zero = 0;
- if(udev->speed == USB_SPEED_HIGH)
- {
+ if(udev->speed == USB_SPEED_HIGH) {
if (skb->len > 0 && skb->len % 512 == 0)
bSend0Byte = true;
}
- else
- {
+ else {
if (skb->len > 0 && skb->len % 64 == 0)
bSend0Byte = true;
}
- if (bSend0Byte)
- {
-#if 1
+ if (bSend0Byte) {
tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC);
- if(!tx_urb_zero){
+ if(!tx_urb_zero) {
RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n");
return -ENOMEM;
}
usb_sndbulkpipe(udev,idx_pipe), &zero,
0, tx_zero_isr, dev);
status = usb_submit_urb(tx_urb_zero, GFP_ATOMIC);
- if (status){
- RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
- return -1;
+ switch (status) {
+ case 0:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ break;
+ default:
+ RT_TRACE(COMP_ERR, "Error TX URB for zero byte %d, error %d",
+ atomic_read(&priv->tx_pending[tcb_desc->queue_index]), status);
+ return -1;
}
-#endif
}
dev->trans_start = jiffies;
atomic_inc(&priv->tx_pending[tcb_desc->queue_index]);
return 0;
- }else{
+ } else {
RT_TRACE(COMP_ERR, "Error TX URB %d, error %d", atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
status);
return -1;
wireless_mode = WIRELESS_MODE_B;
}
}
-#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we shoud wait for FPGA
+#ifdef TO_DO_LIST //// TODO: this function doesn't work well at this time, we should wait for FPGA
ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting );
#endif
//LZM 090306 usb crash here, mark it temp
return RFtype;
}
+void update_hal_variables(struct r8192_priv *priv)
+{
+ int rf_path;
+ int i;
+ u8 index;
+
+ for (rf_path = 0; rf_path < 2; rf_path++) {
+ for (i = 0; i < 3; i++) {
+ RT_TRACE((COMP_INIT), "CCK RF-%d CHan_Area-%d = 0x%x\n", rf_path, i, priv->RfCckChnlAreaTxPwr[rf_path][i]);
+ RT_TRACE((COMP_INIT), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i, priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
+ RT_TRACE((COMP_INIT), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i, priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
+ }
+ /* Assign dedicated channel tx power */
+ for(i = 0; i < 14; i++) {
+ /* channel 1-3 use the same Tx Power Level. */
+ if (i < 3) /* Channel 1-3 */
+ index = 0;
+ else if (i < 9) /* Channel 4-9 */
+ index = 1;
+ else /* Channel 10-14 */
+ index = 2;
+ /* Record A & B CCK /OFDM - 1T/2T Channel area tx power */
+ priv->RfTxPwrLevelCck[rf_path][i] = priv->RfCckChnlAreaTxPwr[rf_path][index];
+ priv->RfTxPwrLevelOfdm1T[rf_path][i] = priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
+ priv->RfTxPwrLevelOfdm2T[rf_path][i] = priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
+ if (rf_path == 0) {
+ priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
+ priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
+ }
+ }
+ for(i = 0; i < 14; i++) {
+ RT_TRACE((COMP_INIT),
+ "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
+ rf_path, i, priv->RfTxPwrLevelCck[rf_path][i],
+ priv->RfTxPwrLevelOfdm1T[rf_path][i] ,
+ priv->RfTxPwrLevelOfdm2T[rf_path][i] );
+ }
+ }
+}
+
//
// Description:
// Config HW adapter information into initial value.
struct r8192_priv *priv = ieee80211_priv(dev);
//u16 i,usValue;
//u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
- u8 rf_path, index; // For EEPROM/EFUSE After V0.6_1117
+ u8 rf_path; // For EEPROM/EFUSE After V0.6_1117
int i;
RT_TRACE(COMP_INIT, "====> ConfigAdapterInfo8192SForAutoLoadFail\n");
write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
- RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
+ RT_TRACE(COMP_INIT,
+ "ReadAdapterInfo8192SEFuse(), Permanent Address = %pM\n",
+ dev->dev_addr);
priv->EEPROMBoardType = EEPROM_Default_BoardType;
priv->rf_type = RF_1T2R; //RF_2T2R
}
}
- for (i = 0; i < 3; i++)
- {
- //RT_TRACE((COMP_EFUSE), "CCK RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfCckChnlAreaTxPwr[rf_path][i]);
- //RT_TRACE((COMP_EFUSE), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
- //RT_TRACE((COMP_EFUSE), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
- }
-
- // Assign dedicated channel tx power
- for(i=0; i<14; i++) // channel 1~3 use the same Tx Power Level.
- {
- if (i < 3) // Cjanel 1-3
- index = 0;
- else if (i < 9) // Channel 4-9
- index = 1;
- else // Channel 10-14
- index = 2;
-
- // Record A & B CCK /OFDM - 1T/2T Channel area tx power
- priv->RfTxPwrLevelCck[rf_path][i] =
- priv->RfCckChnlAreaTxPwr[rf_path][index];
- priv->RfTxPwrLevelOfdm1T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
- priv->RfTxPwrLevelOfdm2T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
- }
-
- for(i=0; i<14; i++)
- {
- //RT_TRACE((COMP_EFUSE), "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
- //rf_path, i, priv->RfTxPwrLevelCck[0][i],
- //priv->RfTxPwrLevelOfdm1T[0][i] ,
- //priv->RfTxPwrLevelOfdm2T[0][i] );
- }
+ update_hal_variables(priv);
//
// Update remained HAL variables.
write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
- RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
+ RT_TRACE(COMP_INIT,
+ "ReadAdapterInfo8192SEFuse(), Permanent Address = %pM\n",
+ dev->dev_addr);
//
// Get CustomerID(Boad Type)
}
}
-//
- // Update Tx Power HAL variables.
-//
- for (rf_path = 0; rf_path < 2; rf_path++)
- {
- for (i = 0; i < 3; i++)
- {
- RT_TRACE((COMP_INIT), "CCK RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- priv->RfCckChnlAreaTxPwr[rf_path][i]);
- RT_TRACE((COMP_INIT), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
- RT_TRACE((COMP_INIT), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i, priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
- }
-
- // Assign dedicated channel tx power
- for(i=0; i<14; i++) // channel 1~3 use the same Tx Power Level.
- {
- if (i < 3) // Cjanel 1-3
- index = 0;
- else if (i < 9) // Channel 4-9
- index = 1;
- else // Channel 10-14
- index = 2;
-
- // Record A & B CCK /OFDM - 1T/2T Channel area tx power
- priv->RfTxPwrLevelCck[rf_path][i] =
- priv->RfCckChnlAreaTxPwr[rf_path][index];
- priv->RfTxPwrLevelOfdm1T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
- priv->RfTxPwrLevelOfdm2T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
- if (rf_path == 0)
- {
- priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
- priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
- }
- }
-
- for(i=0; i<14; i++)
- {
- RT_TRACE((COMP_INIT),
- "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
- rf_path, i, priv->RfTxPwrLevelCck[rf_path][i],
- priv->RfTxPwrLevelOfdm1T[rf_path][i] ,
- priv->RfTxPwrLevelOfdm2T[rf_path][i] );
- }
- }
+ update_hal_variables(priv);
}
//
if (EntryNo >= TOTAL_CAM_ENTRY)
RT_TRACE(COMP_ERR, "cam entry exceeds in setKey()\n");
- RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr"MAC_FMT"\n", dev,EntryNo, KeyIndex, KeyType, MAC_ARG(MacAddr));
+ RT_TRACE(COMP_SEC, "====>to setKey(), dev:%p, EntryNo:%d, KeyIndex:%d, KeyType:%d, MacAddr%pM\n", dev,EntryNo, KeyIndex, KeyType, MacAddr);
if (DefaultKey)
usConfig |= BIT15 | (KeyType<<2);
git.samba.org / sfrench / cifs-2.6.git / blobdiff