[PATCH] const struct tty_operations

[sfrench/cifs-2.6.git] / drivers / char / mxser.c

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 645d9d713aec84452615d641cfb73603d4eef2b5..8253fca8efd527c3a1d763a2805bffc4c20cb77a 100644 (file)
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -36,7 +36,6 @@
  */
 
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/autoconf.h>
 #include <linux/errno.h>
@@ -95,7 +94,7 @@
 #define RELEVANT_IFLAG(iflag)  (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|\
                                          IXON|IXOFF))
 
-#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? IRQF_SHARED : IRQF_DISABLED)
 
 #define C168_ASIC_ID    1
 #define C104_ASIC_ID    2
@@ -454,7 +453,7 @@ static int CheckIsMoxaMust(int io)
 
 /* above is modified by Victor Yu. 08-15-2002 */
 
-static struct tty_operations mxser_ops = {
+static const struct tty_operations mxser_ops = {
        .open = mxser_open,
        .close = mxser_close,
        .write = mxser_write,
@@ -996,7 +995,6 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
 
        info->session = current->signal->session;
        info->pgrp = process_group(current);
-       clear_bit(TTY_DONT_FLIP, &tty->flags);
 
        /*
        status = mxser_get_msr(info->base, 0, info->port);
@@ -2556,71 +2554,7 @@ static int mxser_change_speed(struct mxser_struct *info, struct termios *old_ter
 #define B921600 (B460800 +1)
 #endif
        if (mxser_set_baud_method[info->port] == 0) {
-               switch (cflag & (CBAUD | CBAUDEX)) {
-               case B921600:
-                       baud = 921600;
-                       break;
-               case B460800:
-                       baud = 460800;
-                       break;
-               case B230400:
-                       baud = 230400;
-                       break;
-               case B115200:
-                       baud = 115200;
-                       break;
-               case B57600:
-                       baud = 57600;
-                       break;
-               case B38400:
-                       baud = 38400;
-                       break;
-               case B19200:
-                       baud = 19200;
-                       break;
-               case B9600:
-                       baud = 9600;
-                       break;
-               case B4800:
-                       baud = 4800;
-                       break;
-               case B2400:
-                       baud = 2400;
-                       break;
-               case B1800:
-                       baud = 1800;
-                       break;
-               case B1200:
-                       baud = 1200;
-                       break;
-               case B600:
-                       baud = 600;
-                       break;
-               case B300:
-                       baud = 300;
-                       break;
-               case B200:
-                       baud = 200;
-                       break;
-               case B150:
-                       baud = 150;
-                       break;
-               case B134:
-                       baud = 134;
-                       break;
-               case B110:
-                       baud = 110;
-                       break;
-               case B75:
-                       baud = 75;
-                       break;
-               case B50:
-                       baud = 50;
-                       break;
-               default:
-                       baud = 0;
-                       break;
-               }
+               baud = tty_get_baud_rate(info->tty);
                mxser_set_baud(info, baud);
        }