#include <linux/sysdev.h>
#include <linux/amba/bus.h>
-#include <asm/hardware.h>
+#include <asm/arch/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(REALVIEW_GIC_CPU_BASE),
- .pfn = __phys_to_pfn(REALVIEW_GIC_CPU_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(REALVIEW_GIC_DIST_BASE),
- .pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(REALVIEW_TIMER0_1_BASE),
- .pfn = __phys_to_pfn(REALVIEW_TIMER0_1_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(REALVIEW_TIMER2_3_BASE),
- .pfn = __phys_to_pfn(REALVIEW_TIMER2_3_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
- .virtual = IO_ADDRESS(REALVIEW_UART0_BASE),
- .pfn = __phys_to_pfn(REALVIEW_UART0_BASE),
+ .virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define SMC_DMA { 0, 0 }
+#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define EB_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
-#define CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define CLCD_DMA { 0, 0 }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
+#define EB_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
#define DMAC_DMA { 0, 0 }
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
-#define WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define WATCHDOG_DMA { 0, 0 }
-#define GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO0_DMA { 0, 0 }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
+#define EB_WATCHDOG_DMA { 0, 0 }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
+#define EB_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
-#define RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
-#define RTC_DMA { 0, 0 }
+#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define EB_RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
#define SCI_DMA { 7, 6 }
-#define UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define UART0_DMA { 15, 14 }
-#define UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define UART1_DMA { 13, 12 }
-#define UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define UART2_DMA { 11, 10 }
-#define UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define UART3_DMA { 0x86, 0x87 }
-#define SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
-#define SSP_DMA { 9, 8 }
+#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
+#define EB_UART0_DMA { 15, 14 }
+#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
+#define EB_UART1_DMA { 13, 12 }
+#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
+#define EB_UART2_DMA { 11, 10 }
+#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
+#define EB_UART3_DMA { 0x86, 0x87 }
+#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define EB_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
+AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL);
+AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
+AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
+AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);
+AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
/*
* RealView EB platform devices
*/
+static struct resource realview_eb_flash_resource = {
+ .start = REALVIEW_EB_FLASH_BASE,
+ .end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
-static struct resource realview_eb_smc91x_resources[] = {
+static struct resource realview_eb_eth_resources[] = {
[0] = {
- .start = REALVIEW_ETH_BASE,
- .end = REALVIEW_ETH_BASE + SZ_64K - 1,
+ .start = REALVIEW_EB_ETH_BASE,
+ .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
},
};
-static struct platform_device realview_eb_smc91x_device = {
- .name = "smc91x",
+static struct platform_device realview_eb_eth_device = {
.id = 0,
- .num_resources = ARRAY_SIZE(realview_eb_smc91x_resources),
- .resource = realview_eb_smc91x_resources,
+ .num_resources = ARRAY_SIZE(realview_eb_eth_resources),
+ .resource = realview_eb_eth_resources,
};
+/*
+ * Detect and register the correct Ethernet device. RealView/EB rev D
+ * platforms use the newer SMSC LAN9118 Ethernet chip
+ */
+static int eth_device_register(void)
+{
+ void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
+ u32 idrev;
+
+ if (!eth_addr)
+ return -ENOMEM;
+
+ idrev = readl(eth_addr + 0x50);
+ if ((idrev & 0xFFFF0000) == 0x01180000)
+ /* SMSC LAN9118 chip present */
+ realview_eb_eth_device.name = "smc911x";
+ else
+ /* SMSC 91C111 chip present */
+ realview_eb_eth_device.name = "smc91x";
+
+ iounmap(eth_addr);
+ return platform_device_register(&realview_eb_eth_device);
+}
+
static void __init gic_init_irq(void)
{
if (core_tile_eb11mp()) {
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
- gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
- gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
+ gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
+ gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
} else {
/* board GIC, primary */
- gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE);
- gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+ gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
}
}
kmi1_device.irq[0] = IRQ_EB11MP_KMI1;
/* platform devices */
- realview_eb_smc91x_resources[1].start = IRQ_EB11MP_ETH;
- realview_eb_smc91x_resources[1].end = IRQ_EB11MP_ETH;
+ realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
+ realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
}
static void __init realview_eb_timer_init(void)
{
unsigned int timer_irq;
+ timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
+ timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
+ timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
+ timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
+
if (core_tile_eb11mp()) {
#ifdef CONFIG_LOCAL_TIMERS
twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);
if (core_tile_eb11mp()) {
realview_eb11mp_fixup();
+#ifdef CONFIG_CACHE_L2X0
/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
* Bits: .... ...0 0111 1001 0000 .... .... .... */
l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
}
clk_register(&realview_clcd_clk);
- platform_device_register(&realview_flash_device);
- platform_device_register(&realview_eb_smc91x_device);
+ realview_flash_register(&realview_eb_flash_resource, 1);
platform_device_register(&realview_i2c_device);
+ eth_device_register();
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .phys_io = REALVIEW_UART0_BASE,
- .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
+ .phys_io = REALVIEW_EB_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
git.samba.org / sfrench / cifs-2.6.git / blobdiff