ARM: dts: sun7i: Remove all useless pinctrl nodes

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun7i-a20-pcduino3-nano.dts

diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index bfca960b03e03e9e7991b77f1bb9aeb89d8d0f22..5e538a23476c92734081b3c3f4ee662afb1e98de 100644 (file)
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -71,8 +71,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_pcduino3_nano>;
 
                /* Marked "LED3" on the PCB. */
                usr1 {
@@ -175,30 +173,14 @@
 };
 
 &pio {
-       ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
-               pins = "PH2";
-               function = "gpio_out";
-       };
-
-       led_pins_pcduino3_nano: led_pins@0 {
-               pins = "PH16", "PH15";
-               function = "gpio_out";
-       };
-
        usb0_id_detect_pin: usb0_id_detect_pin@0 {
                pins = "PH4";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-               pins = "PD2";
-               function = "gpio_out";
-       };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
        gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
        status = "okay";
 };
@@ -232,7 +214,6 @@
 
 /* A single regulator (U24) powers both USB host ports. */
 &reg_usb1_vbus {
-       pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
        gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
        status = "okay";
 };