ARM: dts: Move .dts files to vendor sub-directories

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / sun4i-a10-chuwi-v7-cw0825.dts

diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
deleted file mode 100644 (file)
index 7426298..0000000
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-       model = "Chuwi V7 CW0825";
-       compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&ehci1 {
-       status = "okay";
-};
-
-&i2c0 {
-       status = "okay";
-
-       axp209: pmic@34 {
-               compatible = "x-powers,axp209";
-               reg = <0x34>;
-               interrupts = <0>;
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-};
-
-&i2c1 {
-       status = "okay";
-};
-
-&i2c2 {
-       status = "okay";
-
-       ft5306de4: touchscreen@38 {
-               compatible = "edt,edt-ft5406";
-               reg = <0x38>;
-               interrupt-parent = <&pio>;
-               interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-               touchscreen-size-x = <1024>;
-               touchscreen-size-y = <768>;
-       };
-};
-
-&lradc {
-       vref-supply = <&reg_vcc3v0>;
-       status = "okay";
-
-       button-800 {
-               label = "Volume Up";
-               linux,code = <KEY_VOLUMEUP>;
-               channel = <0>;
-               voltage = <800000>;
-       };
-
-       button-1000 {
-               label = "Volume Down";
-               linux,code = <KEY_VOLUMEDOWN>;
-               channel = <0>;
-               voltage = <1000000>;
-       };
-
-       button-1200 {
-               label = "Back";
-               linux,code = <KEY_BACK>;
-               channel = <0>;
-               voltage = <1200000>;
-       };
-};
-
-&mmc0 {
-       vmmc-supply = <&reg_vcc3v3>;
-       bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
-       status = "okay";
-};
-
-&otg_sram {
-       status = "okay";
-};
-
-&reg_usb0_vbus {
-       status = "okay";
-};
-
-&reg_usb2_vbus {
-       status = "okay";
-};
-
-&uart0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pb_pins>;
-       status = "okay";
-};
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usbphy {
-       usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
-       usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
-       usb0_vbus-supply = <&reg_usb0_vbus>;
-       usb2_vbus-supply = <&reg_usb2_vbus>;
-       status = "okay";
-};