+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
-
-/dts-v1/;
-
-#include "imx31.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "LogicPD i.MX31 Lite";
- compatible = "logicpd,imx31-lite", "fsl,imx31";
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x8000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0 {
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- };
-
- led1 {
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&ata {
- status = "okay";
-};
-
-&nfc {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-on-flash-bbt;
- status = "okay";
-};
-
-&sdhci1 {
- bus-width = <4>;
- cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&spi2 {
- status = "okay";
-
- pmic@0 {
- compatible = "fsl,mc13783";
- reg = <0>;
- spi-cs-high;
- spi-max-frequency = <1000000>;
- interrupt-parent = <&gpio1>;
- interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-
- fsl,mc13xxx-uses-adc;
- fsl,mc13xxx-uses-rtc;
-
- regulators {
- sw1a { /* QVCC */
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw1b { /* QVCC */
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw2a { /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- sw2b { /* NVCC10 */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- violo { /* NVCC1 and NVCC7 */
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- viohi { /* VIOHI */
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vaudio { /* VAUDIO */
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- };
-
- vcam { /* NVCC4 */
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- vgen { /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
- regulator-min-microvolt = <2775000>;
- regulator-max-microvolt = <2775000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vmmc2 { /* NVCC3 */
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&uart1 {
- uart-has-rtscts;
- status = "okay";
-};
-
-/* Routed to the extension board */
-&uart2 {
- uart-has-rtscts;
- status = "okay";
-};
-
-/* Routed to the extension board */
-&uart3 {
- uart-has-rtscts;
- status = "okay";
-};
-
-&weim {
- status = "okay";
-
- nor@0,0 {
- compatible = "cfi-flash";
- reg = <0 0x0 0x200000>;
- bank-width = <2>;
- linux,mtd-name = "physmap-flash.0";
- fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
- };
-
- ethernet@4,0 {
- compatible = "smsc,lan9117", "smsc,lan9115";
- reg = <4 0x0 0x100>;
- interrupt-parent = <&gpio1>;
- interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
- phy-mode = "mii";
- reg-io-width = <2>;
- smsc,irq-push-pull;
- fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
- };
-};