Merge branch 'omap-for-v4.6/dt-gpmc' into omap-for-v4.6/dt

[sfrench/cifs-2.6.git] / arch / arm / boot / dts / dra7.dtsi

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 51ddc981b00b9dc50d2063703e4fba9d80116f98..54f9cd805ff153bb480956832bcad2e76b8d2229 100644 (file)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -156,6 +156,11 @@
                                        compatible = "syscon";
                                        reg = <0x1c04 0x0020>;
                                };
+
+                               scm_conf_pcie: scm_conf@1c24 {
+                                       compatible = "syscon";
+                                       reg = <0x1c24 0x0024>;
+                               };
                        };
 
                        cm_core_aon: cm_core_aon@5000 {
@@ -1168,14 +1173,6 @@
                        status = "disabled";
                };
 
-               omap_control_sata: control-phy@4a002374 {
-                       compatible = "ti,control-phy-pipe3";
-                       reg = <0x4a002374 0x4>;
-                       reg-names = "power";
-                       clocks = <&sys_clkin1>;
-                       clock-names = "sysclk";
-               };
-
                /* OCP2SCP3 */
                ocp2scp@4a090000 {
                        compatible = "ti,omap-ocp2scp";
@@ -1190,7 +1187,7 @@
                                      <0x4A096400 0x64>, /* phy_tx */
                                      <0x4A096800 0x40>; /* pll_ctrl */
                                reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-                               ctrl-module = <&omap_control_sata>;
+                               syscon-phy-power = <&scm_conf 0x374>;
                                clocks = <&sys_clkin1>, <&sata_ref_clk>;
                                clock-names = "sysclk", "refclk";
                                syscon-pllreset = <&scm_conf 0x3fc>;
@@ -1202,16 +1199,18 @@
                                reg = <0x4a094000 0x80>, /* phy_rx */
                                      <0x4a094400 0x64>; /* phy_tx */
                                reg-names = "phy_rx", "phy_tx";
-                               ctrl-module = <&omap_control_pcie1phy>;
+                               syscon-phy-power = <&scm_conf_pcie 0x1c>;
+                               syscon-pcs = <&scm_conf_pcie 0x10>;
                                clocks = <&dpll_pcie_ref_ck>,
                                         <&dpll_pcie_ref_m2ldo_ck>,
                                         <&optfclk_pciephy1_32khz>,
                                         <&optfclk_pciephy1_clk>,
                                         <&optfclk_pciephy1_div_clk>,
-                                        <&optfclk_pciephy_div>;
+                                        <&optfclk_pciephy_div>,
+                                        <&sys_clkin1>;
                                clock-names = "dpll_ref", "dpll_ref_m2",
                                              "wkupclk", "refclk",
-                                             "div-clk", "phy-div";
+                                             "div-clk", "phy-div", "sysclk";
                                #phy-cells = <0>;
                        };
 
@@ -1220,16 +1219,18 @@
                                reg = <0x4a095000 0x80>, /* phy_rx */
                                      <0x4a095400 0x64>; /* phy_tx */
                                reg-names = "phy_rx", "phy_tx";
-                               ctrl-module = <&omap_control_pcie2phy>;
+                               syscon-phy-power = <&scm_conf_pcie 0x20>;
+                               syscon-pcs = <&scm_conf_pcie 0x10>;
                                clocks = <&dpll_pcie_ref_ck>,
                                         <&dpll_pcie_ref_m2ldo_ck>,
                                         <&optfclk_pciephy2_32khz>,
                                         <&optfclk_pciephy2_clk>,
                                         <&optfclk_pciephy2_div_clk>,
-                                        <&optfclk_pciephy_div>;
+                                        <&optfclk_pciephy_div>,
+                                        <&sys_clkin1>;
                                clock-names = "dpll_ref", "dpll_ref_m2",
                                              "wkupclk", "refclk",
-                                             "div-clk", "phy-div";
+                                             "div-clk", "phy-div", "sysclk";
                                #phy-cells = <0>;
                                status = "disabled";
                        };
@@ -1245,23 +1246,6 @@
                        ti,hwmods = "sata";
                };
 
-               omap_control_pcie1phy: control-phy@0x4a003c40 {
-                       compatible = "ti,control-phy-pcie";
-                       reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-                       reg-names = "power", "control_sma", "pcie_pcs";
-                       clocks = <&sys_clkin1>;
-                       clock-names = "sysclk";
-               };
-
-               omap_control_pcie2phy: control-pcie@0x4a003c44 {
-                       compatible = "ti,control-phy-pcie";
-                       reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-                       reg-names = "power", "control_sma", "pcie_pcs";
-                       clocks = <&sys_clkin1>;
-                       clock-names = "sysclk";
-                       status = "disabled";
-               };
-
                rtc: rtc@48838000 {
                        compatible = "ti,am3352-rtc";
                        reg = <0x48838000 0x100>;
@@ -1271,24 +1255,6 @@
                        clocks = <&sys_32k_ck>;
                };
 
-               omap_control_usb2phy1: control-phy@4a002300 {
-                       compatible = "ti,control-phy-usb2";
-                       reg = <0x4a002300 0x4>;
-                       reg-names = "power";
-               };
-
-               omap_control_usb3phy1: control-phy@4a002370 {
-                       compatible = "ti,control-phy-pipe3";
-                       reg = <0x4a002370 0x4>;
-                       reg-names = "power";
-               };
-
-               omap_control_usb2phy2: control-phy@0x4a002e74 {
-                       compatible = "ti,control-phy-usb2-dra7";
-                       reg = <0x4a002e74 0x4>;
-                       reg-names = "power";
-               };
-
                /* OCP2SCP1 */
                ocp2scp@4a080000 {
                        compatible = "ti,omap-ocp2scp";
@@ -1301,7 +1267,7 @@
                        usb2_phy1: phy@4a084000 {
                                compatible = "ti,omap-usb2";
                                reg = <0x4a084000 0x400>;
-                               ctrl-module = <&omap_control_usb2phy1>;
+                               syscon-phy-power = <&scm_conf 0x300>;
                                clocks = <&usb_phy1_always_on_clk32k>,
                                         <&usb_otg_ss1_refclk960m>;
                                clock-names =   "wkupclk",
@@ -1310,9 +1276,10 @@
                        };
 
                        usb2_phy2: phy@4a085000 {
-                               compatible = "ti,omap-usb2";
+                               compatible = "ti,dra7x-usb2-phy2",
+                                            "ti,omap-usb2";
                                reg = <0x4a085000 0x400>;
-                               ctrl-module = <&omap_control_usb2phy2>;
+                               syscon-phy-power = <&scm_conf 0xe74>;
                                clocks = <&usb_phy2_always_on_clk32k>,
                                         <&usb_otg_ss2_refclk960m>;
                                clock-names =   "wkupclk",
@@ -1326,7 +1293,7 @@
                                      <0x4a084800 0x64>,
                                      <0x4a084c00 0x40>;
                                reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-                               ctrl-module = <&omap_control_usb3phy1>;
+                               syscon-phy-power = <&scm_conf 0x370>;
                                clocks = <&usb_phy3_always_on_clk32k>,
                                         <&sys_clkin1>,
                                         <&usb_otg_ss1_refclk960m>;
@@ -1357,7 +1324,6 @@
                                                  "otg";
                                phys = <&usb2_phy1>, <&usb3_phy1>;
                                phy-names = "usb2-phy", "usb3-phy";
-                               tx-fifo-resize;
                                maximum-speed = "super-speed";
                                dr_mode = "otg";
                                snps,dis_u3_susphy_quirk;
@@ -1385,7 +1351,6 @@
                                                  "otg";
                                phys = <&usb2_phy2>;
                                phy-names = "usb2-phy";
-                               tx-fifo-resize;
                                maximum-speed = "high-speed";
                                dr_mode = "otg";
                                snps,dis_u3_susphy_quirk;
@@ -1413,7 +1378,6 @@
                                interrupt-names = "peripheral",
                                                  "host",
                                                  "otg";
-                               tx-fifo-resize;
                                maximum-speed = "high-speed";
                                dr_mode = "otg";
                                snps,dis_u3_susphy_quirk;
@@ -1605,6 +1569,8 @@
                #include "omap4-cpu-thermal.dtsi"
                #include "omap5-gpu-thermal.dtsi"
                #include "omap5-core-thermal.dtsi"
+               #include "dra7-dspeve-thermal.dtsi"
+               #include "dra7-iva-thermal.dtsi"
        };
 
 };