the GPE dispatcher.
This facility can be used to prevent such uncontrolled
GPE floodings.
- Format: <byte>
+ Format: <byte> or <bitmap-list>
acpi_no_auto_serialize [HW,ACPI]
Disable auto-serialization of AML methods
ccw_timeout_log [S390]
See Documentation/s390/common_io.rst for details.
- cgroup_disable= [KNL] Disable a particular controller
- Format: {name of the controller(s) to disable}
+ cgroup_disable= [KNL] Disable a particular controller or optional feature
+ Format: {name of the controller(s) or feature(s) to disable}
The effects of cgroup_disable=foo are:
- foo isn't auto-mounted if you mount all cgroups in
a single hierarchy
- foo isn't visible as an individually mountable
subsystem
+ - if foo is an optional feature then the feature is
+ disabled and corresponding cgroup files are not
+ created
{Currently only "memory" controller deal with this and
cut the overhead, others just disable the usage. So
only cgroup_disable=memory is actually worthy}
+ Specifying "pressure" disables per-cgroup pressure
+ stall information accounting feature
cgroup_no_v1= [KNL] Disable cgroup controllers and named hierarchies in v1
Format: { { controller | "all" | "named" }
loops can be debugged more effectively on production
systems.
+ clocksource.max_cswd_read_retries= [KNL]
+ Number of clocksource_watchdog() retries due to
+ external delays before the clock will be marked
+ unstable. Defaults to three retries, that is,
+ four attempts to read the clock under test.
+
+ clocksource.verify_n_cpus= [KNL]
+ Limit the number of CPUs checked for clocksources
+ marked with CLOCK_SOURCE_VERIFY_PERCPU that
+ are marked unstable due to excessive skew.
+ A negative value says to check all CPUs, while
+ zero says not to check any. Values larger than
+ nr_cpu_ids are silently truncated to nr_cpu_ids.
+ The actual CPUs are chosen randomly, with
+ no replacement if the same CPU is chosen twice.
+
+ clocksource-wdtest.holdoff= [KNL]
+ Set the time in seconds that the clocksource
+ watchdog test waits before commencing its tests.
+ Defaults to zero when built as a module and to
+ 10 seconds when built into the kernel.
+
clearcpuid=BITNUM[,BITNUM...] [X86]
Disable CPUID feature X for the kernel. See
arch/x86/include/asm/cpufeatures.h for the valid bit
nr_uarts= [SERIAL] maximum number of UARTs to be registered.
+ numa=off [KNL, ARM64, PPC, RISCV, SPARC, X86] Disable NUMA, Only
+ set up a single NUMA node spanning all memory.
+
numa_balancing= [KNL,ARM64,PPC,RISCV,S390,X86] Enable or disable automatic
NUMA balancing.
Allowed values are enable and disable
off: turn off poisoning (default)
on: turn on poisoning
+ page_reporting.page_reporting_order=
+ [KNL] Minimal page reporting order
+ Format: <integer>
+ Adjust the minimal page reporting order. The page
+ reporting is disabled when it exceeds (MAX_ORDER-1).
+
panic= [KNL] Kernel behaviour on panic: delay <timeout>
timeout > 0: seconds before rebooting
timeout = 0: wait forever
Reserves a hole at the top of the kernel virtual
address space.
- reservelow= [X86]
- Format: nn[K]
- Set the amount of memory to reserve for BIOS at
- the bottom of the address space.
-
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
exception. Default behavior is by #AC if
both features are enabled in hardware.
+ ratelimit:N -
+ Set system wide rate limit to N bus locks
+ per second for bus lock detection.
+ 0 < N <= 1000.
+
+ N/A for split lock detection.
+
+
If an #AC exception is hit in the kernel or in
firmware (i.e. not while executing in user mode)
the kernel will oops in either "warn" or "fatal"