Merge branch 'for-6.9/amd-sfh' into for-linus
[sfrench/cifs-2.6.git] / sound / pci / hda / cs35l41_hda_property.c
1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // CS35L41 ALSA HDA Property driver
4 //
5 // Copyright 2023 Cirrus Logic, Inc.
6 //
7 // Author: Stefan Binding <sbinding@opensource.cirrus.com>
8
9 #include <linux/acpi.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/string.h>
12 #include "cs35l41_hda_property.h"
13 #include <linux/spi/spi.h>
14
15 #define MAX_AMPS 4
16
17 struct cs35l41_config {
18         const char *ssid;
19         int num_amps;
20         enum {
21                 INTERNAL,
22                 EXTERNAL
23         } boost_type;
24         u8 channel[MAX_AMPS];
25         int reset_gpio_index; /* -1 if no reset gpio */
26         int spkid_gpio_index; /* -1 if no spkid gpio */
27         int cs_gpio_index; /* -1 if no cs gpio, or cs-gpios already exists, max num amps == 2 */
28         int boost_ind_nanohenry; /* Required if boost_type == Internal */
29         int boost_peak_milliamp; /* Required if boost_type == Internal */
30         int boost_cap_microfarad; /* Required if boost_type == Internal */
31 };
32
33 static const struct cs35l41_config cs35l41_config_table[] = {
34         { "10280B27", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
35         { "10280B28", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
36         { "10280BEB", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
37         { "10280C4D", 4, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT }, 0, 1, -1, 1000, 4500, 24 },
38 /*
39  * Device 103C89C6 does have _DSD, however it is setup to use the wrong boost type.
40  * We can override the _DSD to correct the boost type here.
41  * Since this laptop has valid ACPI, we do not need to handle cs-gpios, since that already exists
42  * in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD.
43  */
44         { "103C89C6", 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
45         { "103C8A28", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
46         { "103C8A29", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
47         { "103C8A2A", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
48         { "103C8A2B", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
49         { "103C8A2C", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
50         { "103C8A2D", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
51         { "103C8A2E", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
52         { "103C8A30", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
53         { "103C8A31", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
54         { "103C8BB3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
55         { "103C8BB4", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
56         { "103C8BDF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
57         { "103C8BE0", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
58         { "103C8BE1", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
59         { "103C8BE2", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
60         { "103C8BE9", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
61         { "103C8BDD", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
62         { "103C8BDE", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
63         { "103C8BE3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
64         { "103C8BE5", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
65         { "103C8BE6", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
66         { "103C8B3A", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
67         { "104312AF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
68         { "10431433", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
69         { "10431463", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
70         { "10431473", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
71         { "10431483", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
72         { "10431493", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
73         { "104314D3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
74         { "104314E3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
75         { "10431503", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
76         { "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
77         { "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
78         { "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
79         { "10431683", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
80         { "104316A3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
81         { "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
82         { "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
83         { "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
84         { "10431863", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
85         { "104318D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
86         { "10431C9F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
87         { "10431CAF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
88         { "10431CCF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
89         { "10431CDF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
90         { "10431CEF", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
91         { "10431D1F", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
92         { "10431DA2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
93         { "10431E02", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
94         { "10431EE2", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, -1, -1, 0, 0, 0 },
95         { "10431F12", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
96         { "10431F1F", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 0, 0, 0 },
97         { "10431F62", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
98         { "17AA38B4", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
99         { "17AA38B5", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
100         { "17AA38B6", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
101         { "17AA38B7", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
102         {}
103 };
104
105 static int cs35l41_add_gpios(struct cs35l41_hda *cs35l41, struct device *physdev, int reset_gpio,
106                              int spkid_gpio, int cs_gpio_index, int num_amps)
107 {
108         struct acpi_gpio_mapping *gpio_mapping = NULL;
109         struct acpi_gpio_params *reset_gpio_params = NULL;
110         struct acpi_gpio_params *spkid_gpio_params = NULL;
111         struct acpi_gpio_params *cs_gpio_params = NULL;
112         unsigned int num_entries = 0;
113         unsigned int reset_index, spkid_index, csgpio_index;
114         int i;
115
116         /*
117          * GPIO Mapping only needs to be done once, since it would be available for subsequent amps
118          */
119         if (cs35l41->dacpi->driver_gpios)
120                 return 0;
121
122         if (reset_gpio >= 0) {
123                 reset_index = num_entries;
124                 num_entries++;
125         }
126
127         if (spkid_gpio >= 0) {
128                 spkid_index = num_entries;
129                 num_entries++;
130         }
131
132         if ((cs_gpio_index >= 0)  && (num_amps == 2)) {
133                 csgpio_index = num_entries;
134                 num_entries++;
135         }
136
137         if (!num_entries)
138                 return 0;
139
140         /* must include termination entry */
141         num_entries++;
142
143         gpio_mapping = devm_kcalloc(physdev, num_entries, sizeof(struct acpi_gpio_mapping),
144                                     GFP_KERNEL);
145
146         if (!gpio_mapping)
147                 goto err;
148
149         if (reset_gpio >= 0) {
150                 gpio_mapping[reset_index].name = "reset-gpios";
151                 reset_gpio_params = devm_kcalloc(physdev, num_amps, sizeof(struct acpi_gpio_params),
152                                                  GFP_KERNEL);
153                 if (!reset_gpio_params)
154                         goto err;
155
156                 for (i = 0; i < num_amps; i++)
157                         reset_gpio_params[i].crs_entry_index = reset_gpio;
158
159                 gpio_mapping[reset_index].data = reset_gpio_params;
160                 gpio_mapping[reset_index].size = num_amps;
161         }
162
163         if (spkid_gpio >= 0) {
164                 gpio_mapping[spkid_index].name = "spk-id-gpios";
165                 spkid_gpio_params = devm_kcalloc(physdev, num_amps, sizeof(struct acpi_gpio_params),
166                                                  GFP_KERNEL);
167                 if (!spkid_gpio_params)
168                         goto err;
169
170                 for (i = 0; i < num_amps; i++)
171                         spkid_gpio_params[i].crs_entry_index = spkid_gpio;
172
173                 gpio_mapping[spkid_index].data = spkid_gpio_params;
174                 gpio_mapping[spkid_index].size = num_amps;
175         }
176
177         if ((cs_gpio_index >= 0) && (num_amps == 2)) {
178                 gpio_mapping[csgpio_index].name = "cs-gpios";
179                 /* only one GPIO CS is supported without using _DSD, obtained using index 0 */
180                 cs_gpio_params = devm_kzalloc(physdev, sizeof(struct acpi_gpio_params), GFP_KERNEL);
181                 if (!cs_gpio_params)
182                         goto err;
183
184                 cs_gpio_params->crs_entry_index = cs_gpio_index;
185
186                 gpio_mapping[csgpio_index].data = cs_gpio_params;
187                 gpio_mapping[csgpio_index].size = 1;
188         }
189
190         return devm_acpi_dev_add_driver_gpios(physdev, gpio_mapping);
191 err:
192         devm_kfree(physdev, gpio_mapping);
193         devm_kfree(physdev, reset_gpio_params);
194         devm_kfree(physdev, spkid_gpio_params);
195         devm_kfree(physdev, cs_gpio_params);
196         return -ENOMEM;
197 }
198
199 static int generic_dsd_config(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
200                               const char *hid)
201 {
202         struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
203         const struct cs35l41_config *cfg;
204         struct gpio_desc *cs_gpiod;
205         struct spi_device *spi;
206         bool dsd_found;
207         int ret;
208
209         for (cfg = cs35l41_config_table; cfg->ssid; cfg++) {
210                 if (!strcasecmp(cfg->ssid, cs35l41->acpi_subsystem_id))
211                         break;
212         }
213
214         if (!cfg->ssid)
215                 return -ENOENT;
216
217         if (!cs35l41->dacpi || cs35l41->dacpi != ACPI_COMPANION(physdev)) {
218                 dev_err(cs35l41->dev, "ACPI Device does not match, cannot override _DSD.\n");
219                 return -ENODEV;
220         }
221
222         dev_info(cs35l41->dev, "Adding DSD properties for %s\n", cs35l41->acpi_subsystem_id);
223
224         dsd_found = acpi_dev_has_props(cs35l41->dacpi);
225
226         if (!dsd_found) {
227                 ret = cs35l41_add_gpios(cs35l41, physdev, cfg->reset_gpio_index,
228                                                  cfg->spkid_gpio_index, cfg->cs_gpio_index,
229                                                  cfg->num_amps);
230                 if (ret) {
231                         dev_err(cs35l41->dev, "Error adding GPIO mapping: %d\n", ret);
232                         return ret;
233                 }
234         } else if (cfg->reset_gpio_index >= 0 || cfg->spkid_gpio_index >= 0) {
235                 dev_warn(cs35l41->dev, "Cannot add Reset/Speaker ID/SPI CS GPIO Mapping, "
236                          "_DSD already exists.\n");
237         }
238
239         if (cs35l41->control_bus == SPI) {
240                 cs35l41->index = id;
241
242                 /*
243                  * Manually set the Chip Select for the second amp <cs_gpio_index> in the node.
244                  * This is only supported for systems with 2 amps, since we cannot expand the
245                  * default number of chip selects without using cs-gpios
246                  * The CS GPIO must be set high prior to communicating with the first amp (which
247                  * uses a native chip select), to ensure the second amp does not clash with the
248                  * first.
249                  */
250                 if (IS_ENABLED(CONFIG_SPI) && cfg->cs_gpio_index >= 0) {
251                         spi = to_spi_device(cs35l41->dev);
252
253                         if (cfg->num_amps != 2) {
254                                 dev_warn(cs35l41->dev,
255                                          "Cannot update SPI CS, Number of Amps (%d) != 2\n",
256                                          cfg->num_amps);
257                         } else if (dsd_found) {
258                                 dev_warn(cs35l41->dev,
259                                         "Cannot update SPI CS, _DSD already exists.\n");
260                         } else {
261                                 /*
262                                  * This is obtained using driver_gpios, since only one GPIO for CS
263                                  * exists, this can be obtained using index 0.
264                                  */
265                                 cs_gpiod = gpiod_get_index(physdev, "cs", 0, GPIOD_OUT_LOW);
266                                 if (IS_ERR(cs_gpiod)) {
267                                         dev_err(cs35l41->dev,
268                                                 "Unable to get Chip Select GPIO descriptor\n");
269                                         return PTR_ERR(cs_gpiod);
270                                 }
271                                 if (id == 1) {
272                                         spi_set_csgpiod(spi, 0, cs_gpiod);
273                                         cs35l41->cs_gpio = cs_gpiod;
274                                 } else {
275                                         gpiod_set_value_cansleep(cs_gpiod, true);
276                                         gpiod_put(cs_gpiod);
277                                 }
278                                 spi_setup(spi);
279                         }
280                 }
281         } else {
282                 if (cfg->num_amps > 2)
283                         /*
284                          * i2c addresses for 3/4 amps are used in order: 0x40, 0x41, 0x42, 0x43,
285                          * subtracting 0x40 would give zero-based index
286                          */
287                         cs35l41->index = id - 0x40;
288                 else
289                         /* i2c addr 0x40 for first amp (always), 0x41/0x42 for 2nd amp */
290                         cs35l41->index = id == 0x40 ? 0 : 1;
291         }
292
293         if (cfg->num_amps == 3)
294                 /* 3 amps means a center channel, so no duplicate channels */
295                 cs35l41->channel_index = 0;
296         else
297                 /*
298                  * if 4 amps, there are duplicate channels, so they need different indexes
299                  * if 2 amps, no duplicate channels, channel_index would be 0
300                  */
301                 cs35l41->channel_index = cs35l41->index / 2;
302
303         cs35l41->reset_gpio = fwnode_gpiod_get_index(acpi_fwnode_handle(cs35l41->dacpi), "reset",
304                                                      cs35l41->index, GPIOD_OUT_LOW,
305                                                      "cs35l41-reset");
306         cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, cs35l41->index, cfg->num_amps, -1);
307
308         hw_cfg->spk_pos = cfg->channel[cs35l41->index];
309
310         if (cfg->boost_type == INTERNAL) {
311                 hw_cfg->bst_type = CS35L41_INT_BOOST;
312                 hw_cfg->bst_ind = cfg->boost_ind_nanohenry;
313                 hw_cfg->bst_ipk = cfg->boost_peak_milliamp;
314                 hw_cfg->bst_cap = cfg->boost_cap_microfarad;
315                 hw_cfg->gpio1.func = CS35L41_NOT_USED;
316                 hw_cfg->gpio1.valid = true;
317         } else {
318                 hw_cfg->bst_type = CS35L41_EXT_BOOST;
319                 hw_cfg->bst_ind = -1;
320                 hw_cfg->bst_ipk = -1;
321                 hw_cfg->bst_cap = -1;
322                 hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
323                 hw_cfg->gpio1.valid = true;
324         }
325
326         hw_cfg->gpio2.func = CS35L41_INTERRUPT;
327         hw_cfg->gpio2.valid = true;
328         hw_cfg->valid = true;
329
330         return 0;
331 }
332
333 /*
334  * Device CLSA010(0/1) doesn't have _DSD so a gpiod_get by the label reset won't work.
335  * And devices created by serial-multi-instantiate don't have their device struct
336  * pointing to the correct fwnode, so acpi_dev must be used here.
337  * And devm functions expect that the device requesting the resource has the correct
338  * fwnode.
339  */
340 static int lenovo_legion_no_acpi(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
341                                  const char *hid)
342 {
343         struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
344
345         /* check I2C address to assign the index */
346         cs35l41->index = id == 0x40 ? 0 : 1;
347         cs35l41->channel_index = 0;
348         cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
349         cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
350         hw_cfg->spk_pos = cs35l41->index;
351         hw_cfg->gpio2.func = CS35L41_INTERRUPT;
352         hw_cfg->gpio2.valid = true;
353         hw_cfg->valid = true;
354
355         if (strcmp(hid, "CLSA0100") == 0) {
356                 hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
357         } else if (strcmp(hid, "CLSA0101") == 0) {
358                 hw_cfg->bst_type = CS35L41_EXT_BOOST;
359                 hw_cfg->gpio1.func = CS35l41_VSPK_SWITCH;
360                 hw_cfg->gpio1.valid = true;
361         }
362
363         return 0;
364 }
365
366 struct cs35l41_prop_model {
367         const char *hid;
368         const char *ssid;
369         int (*add_prop)(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
370                         const char *hid);
371 };
372
373 static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
374         { "CLSA0100", NULL, lenovo_legion_no_acpi },
375         { "CLSA0101", NULL, lenovo_legion_no_acpi },
376         { "CSC3551", "10280B27", generic_dsd_config },
377         { "CSC3551", "10280B28", generic_dsd_config },
378         { "CSC3551", "10280BEB", generic_dsd_config },
379         { "CSC3551", "10280C4D", generic_dsd_config },
380         { "CSC3551", "103C89C6", generic_dsd_config },
381         { "CSC3551", "103C8A28", generic_dsd_config },
382         { "CSC3551", "103C8A29", generic_dsd_config },
383         { "CSC3551", "103C8A2A", generic_dsd_config },
384         { "CSC3551", "103C8A2B", generic_dsd_config },
385         { "CSC3551", "103C8A2C", generic_dsd_config },
386         { "CSC3551", "103C8A2D", generic_dsd_config },
387         { "CSC3551", "103C8A2E", generic_dsd_config },
388         { "CSC3551", "103C8A30", generic_dsd_config },
389         { "CSC3551", "103C8A31", generic_dsd_config },
390         { "CSC3551", "103C8BB3", generic_dsd_config },
391         { "CSC3551", "103C8BB4", generic_dsd_config },
392         { "CSC3551", "103C8BDF", generic_dsd_config },
393         { "CSC3551", "103C8BE0", generic_dsd_config },
394         { "CSC3551", "103C8BE1", generic_dsd_config },
395         { "CSC3551", "103C8BE2", generic_dsd_config },
396         { "CSC3551", "103C8BE9", generic_dsd_config },
397         { "CSC3551", "103C8BDD", generic_dsd_config },
398         { "CSC3551", "103C8BDE", generic_dsd_config },
399         { "CSC3551", "103C8BE3", generic_dsd_config },
400         { "CSC3551", "103C8BE5", generic_dsd_config },
401         { "CSC3551", "103C8BE6", generic_dsd_config },
402         { "CSC3551", "103C8B3A", generic_dsd_config },
403         { "CSC3551", "104312AF", generic_dsd_config },
404         { "CSC3551", "10431433", generic_dsd_config },
405         { "CSC3551", "10431463", generic_dsd_config },
406         { "CSC3551", "10431473", generic_dsd_config },
407         { "CSC3551", "10431483", generic_dsd_config },
408         { "CSC3551", "10431493", generic_dsd_config },
409         { "CSC3551", "104314D3", generic_dsd_config },
410         { "CSC3551", "104314E3", generic_dsd_config },
411         { "CSC3551", "10431503", generic_dsd_config },
412         { "CSC3551", "10431533", generic_dsd_config },
413         { "CSC3551", "10431573", generic_dsd_config },
414         { "CSC3551", "10431663", generic_dsd_config },
415         { "CSC3551", "10431683", generic_dsd_config },
416         { "CSC3551", "104316A3", generic_dsd_config },
417         { "CSC3551", "104316D3", generic_dsd_config },
418         { "CSC3551", "104316F3", generic_dsd_config },
419         { "CSC3551", "104317F3", generic_dsd_config },
420         { "CSC3551", "10431863", generic_dsd_config },
421         { "CSC3551", "104318D3", generic_dsd_config },
422         { "CSC3551", "10431C9F", generic_dsd_config },
423         { "CSC3551", "10431CAF", generic_dsd_config },
424         { "CSC3551", "10431CCF", generic_dsd_config },
425         { "CSC3551", "10431CDF", generic_dsd_config },
426         { "CSC3551", "10431CEF", generic_dsd_config },
427         { "CSC3551", "10431D1F", generic_dsd_config },
428         { "CSC3551", "10431DA2", generic_dsd_config },
429         { "CSC3551", "10431E02", generic_dsd_config },
430         { "CSC3551", "10431EE2", generic_dsd_config },
431         { "CSC3551", "10431F12", generic_dsd_config },
432         { "CSC3551", "10431F1F", generic_dsd_config },
433         { "CSC3551", "10431F62", generic_dsd_config },
434         { "CSC3551", "17AA38B4", generic_dsd_config },
435         { "CSC3551", "17AA38B5", generic_dsd_config },
436         { "CSC3551", "17AA38B6", generic_dsd_config },
437         { "CSC3551", "17AA38B7", generic_dsd_config },
438         {}
439 };
440
441 int cs35l41_add_dsd_properties(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
442                                const char *hid)
443 {
444         const struct cs35l41_prop_model *model;
445
446         for (model = cs35l41_prop_model_table; model->hid; model++) {
447                 if (!strcmp(model->hid, hid) &&
448                     (!model->ssid ||
449                      (cs35l41->acpi_subsystem_id &&
450                       !strcasecmp(model->ssid, cs35l41->acpi_subsystem_id))))
451                         return model->add_prop(cs35l41, physdev, id, hid);
452         }
453
454         return -ENOENT;
455 }