drivers/scsi/arm/powertec.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  linux/drivers/acorn/scsi/powertec.c
   4  *
   5  *  Copyright (C) 1997-2005 Russell King
   6  */
   7 #include <linux/module.h>
   8 #include <linux/blkdev.h>
   9 #include <linux/kernel.h>
  10 #include <linux/string.h>
  11 #include <linux/ioport.h>
  12 #include <linux/proc_fs.h>
  13 #include <linux/delay.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/init.h>
  16 #include <linux/dma-mapping.h>
  17
  18 #include <asm/dma.h>
  19 #include <asm/ecard.h>
  20 #include <asm/io.h>
  21 #include <asm/pgtable.h>
  22
  23 #include "../scsi.h"
  24 #include <scsi/scsi_host.h>
  25 #include "fas216.h"
  26 #include "scsi.h"
  27
  28 #include <scsi/scsicam.h>
  29
  30 #define POWERTEC_FAS216_OFFSET  0x3000
  31 #define POWERTEC_FAS216_SHIFT   6
  32
  33 #define POWERTEC_INTR_STATUS    0x2000
  34 #define POWERTEC_INTR_BIT       0x80
  35
  36 #define POWERTEC_RESET_CONTROL  0x1018
  37 #define POWERTEC_RESET_BIT      1
  38
  39 #define POWERTEC_TERM_CONTROL   0x2018
  40 #define POWERTEC_TERM_ENABLE    1
  41
  42 #define POWERTEC_INTR_CONTROL   0x101c
  43 #define POWERTEC_INTR_ENABLE    1
  44 #define POWERTEC_INTR_DISABLE   0
  45
  46 #define VERSION "1.10 (19/01/2003 2.5.59)"
  47
  48 /*
  49  * Use term=0,1,0,0,0 to turn terminators on/off.
  50  * One entry per slot.
  51  */
  52 static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
  53
  54 #define NR_SG   256
  55
  56 struct powertec_info {
  57         FAS216_Info             info;
  58         struct expansion_card   *ec;
  59         void __iomem            *base;
  60         unsigned int            term_ctl;
  61         struct scatterlist      sg[NR_SG];
  62 };
  63
  64 /* Prototype: void powertecscsi_irqenable(ec, irqnr)
  65  * Purpose  : Enable interrupts on Powertec SCSI card
  66  * Params   : ec    - expansion card structure
  67  *          : irqnr - interrupt number
  68  */
  69 static void
  70 powertecscsi_irqenable(struct expansion_card *ec, int irqnr)
  71 {
  72         struct powertec_info *info = ec->irq_data;
  73         writeb(POWERTEC_INTR_ENABLE, info->base + POWERTEC_INTR_CONTROL);
  74 }
  75
  76 /* Prototype: void powertecscsi_irqdisable(ec, irqnr)
  77  * Purpose  : Disable interrupts on Powertec SCSI card
  78  * Params   : ec    - expansion card structure
  79  *          : irqnr - interrupt number
  80  */
  81 static void
  82 powertecscsi_irqdisable(struct expansion_card *ec, int irqnr)
  83 {
  84         struct powertec_info *info = ec->irq_data;
  85         writeb(POWERTEC_INTR_DISABLE, info->base + POWERTEC_INTR_CONTROL);
  86 }
  87
  88 static const expansioncard_ops_t powertecscsi_ops = {
  89         .irqenable      = powertecscsi_irqenable,
  90         .irqdisable     = powertecscsi_irqdisable,
  91 };
  92
  93 /* Prototype: void powertecscsi_terminator_ctl(host, on_off)
  94  * Purpose  : Turn the Powertec SCSI terminators on or off
  95  * Params   : host   - card to turn on/off
  96  *          : on_off - !0 to turn on, 0 to turn off
  97  */
  98 static void
  99 powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
 100 {
 101         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 102
 103         info->term_ctl = on_off ? POWERTEC_TERM_ENABLE : 0;
 104         writeb(info->term_ctl, info->base + POWERTEC_TERM_CONTROL);
 105 }
 106
 107 /* Prototype: void powertecscsi_intr(irq, *dev_id, *regs)
 108  * Purpose  : handle interrupts from Powertec SCSI card
 109  * Params   : irq    - interrupt number
 110  *            dev_id - user-defined (Scsi_Host structure)
 111  */
 112 static irqreturn_t powertecscsi_intr(int irq, void *dev_id)
 113 {
 114         struct powertec_info *info = dev_id;
 115
 116         return fas216_intr(&info->info);
 117 }
 118
 119 /* Prototype: fasdmatype_t powertecscsi_dma_setup(host, SCpnt, direction, min_type)
 120  * Purpose  : initialises DMA/PIO
 121  * Params   : host      - host
 122  *            SCpnt     - command
 123  *            direction - DMA on to/off of card
 124  *            min_type  - minimum DMA support that we must have for this transfer
 125  * Returns  : type of transfer to be performed
 126  */
 127 static fasdmatype_t
 128 powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
 129                        fasdmadir_t direction, fasdmatype_t min_type)
 130 {
 131         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 132         struct device *dev = scsi_get_device(host);
 133         int dmach = info->info.scsi.dma;
 134
 135         if (info->info.ifcfg.capabilities & FASCAP_DMA &&
 136             min_type == fasdma_real_all) {
 137                 int bufs, map_dir, dma_dir;
 138
 139                 bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG);
 140
 141                 if (direction == DMA_OUT)
 142                         map_dir = DMA_TO_DEVICE,
 143                         dma_dir = DMA_MODE_WRITE;
 144                 else
 145                         map_dir = DMA_FROM_DEVICE,
 146                         dma_dir = DMA_MODE_READ;
 147
 148                 dma_map_sg(dev, info->sg, bufs, map_dir);
 149
 150                 disable_dma(dmach);
 151                 set_dma_sg(dmach, info->sg, bufs);
 152                 set_dma_mode(dmach, dma_dir);
 153                 enable_dma(dmach);
 154                 return fasdma_real_all;
 155         }
 156
 157         /*
 158          * If we're not doing DMA,
 159          *  we'll do slow PIO
 160          */
 161         return fasdma_pio;
 162 }
 163
 164 /* Prototype: int powertecscsi_dma_stop(host, SCpnt)
 165  * Purpose  : stops DMA/PIO
 166  * Params   : host  - host
 167  *            SCpnt - command
 168  */
 169 static void
 170 powertecscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
 171 {
 172         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 173         if (info->info.scsi.dma != NO_DMA)
 174                 disable_dma(info->info.scsi.dma);
 175 }
 176
 177 /* Prototype: const char *powertecscsi_info(struct Scsi_Host * host)
 178  * Purpose  : returns a descriptive string about this interface,
 179  * Params   : host - driver host structure to return info for.
 180  * Returns  : pointer to a static buffer containing null terminated string.
 181  */
 182 const char *powertecscsi_info(struct Scsi_Host *host)
 183 {
 184         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 185         static char string[150];
 186
 187         sprintf(string, "%s (%s) in slot %d v%s terminators o%s",
 188                 host->hostt->name, info->info.scsi.type, info->ec->slot_no,
 189                 VERSION, info->term_ctl ? "n" : "ff");
 190
 191         return string;
 192 }
 193
 194 /* Prototype: int powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
 195  * Purpose  : Set a driver specific function
 196  * Params   : host   - host to setup
 197  *          : buffer - buffer containing string describing operation
 198  *          : length - length of string
 199  * Returns  : -EINVAL, or 0
 200  */
 201 static int
 202 powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
 203 {
 204         int ret = length;
 205
 206         if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) {
 207                 buffer += 12;
 208                 length -= 12;
 209
 210                 if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
 211                         if (buffer[5] == '1')
 212                                 powertecscsi_terminator_ctl(host, 1);
 213                         else if (buffer[5] == '0')
 214                                 powertecscsi_terminator_ctl(host, 0);
 215                         else
 216                                 ret = -EINVAL;
 217                 } else
 218                         ret = -EINVAL;
 219         } else
 220                 ret = -EINVAL;
 221
 222         return ret;
 223 }
 224
 225 /* Prototype: int powertecscsi_proc_info(char *buffer, char **start, off_t offset,
 226  *                                      int length, int host_no, int inout)
 227  * Purpose  : Return information about the driver to a user process accessing
 228  *            the /proc filesystem.
 229  * Params   : buffer  - a buffer to write information to
 230  *            start   - a pointer into this buffer set by this routine to the start
 231  *                      of the required information.
 232  *            offset  - offset into information that we have read up to.
 233  *            length  - length of buffer
 234  *            inout   - 0 for reading, 1 for writing.
 235  * Returns  : length of data written to buffer.
 236  */
 237 static int powertecscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
 238 {
 239         struct powertec_info *info;
 240
 241         info = (struct powertec_info *)host->hostdata;
 242
 243         seq_printf(m, "PowerTec SCSI driver v%s\n", VERSION);
 244         fas216_print_host(&info->info, m);
 245         seq_printf(m, "Term    : o%s\n",
 246                         info->term_ctl ? "n" : "ff");
 247
 248         fas216_print_stats(&info->info, m);
 249         fas216_print_devices(&info->info, m);
 250         return 0;
 251 }
 252
 253 static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
 254 {
 255         struct expansion_card *ec = ECARD_DEV(dev);
 256         struct Scsi_Host *host = ecard_get_drvdata(ec);
 257         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 258
 259         return sprintf(buf, "%d\n", info->term_ctl ? 1 : 0);
 260 }
 261
 262 static ssize_t
 263 powertecscsi_store_term(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
 264 {
 265         struct expansion_card *ec = ECARD_DEV(dev);
 266         struct Scsi_Host *host = ecard_get_drvdata(ec);
 267
 268         if (len > 1)
 269                 powertecscsi_terminator_ctl(host, buf[0] != '0');
 270
 271         return len;
 272 }
 273
 274 static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
 275                    powertecscsi_show_term, powertecscsi_store_term);
 276
 277 static struct scsi_host_template powertecscsi_template = {
 278         .module                         = THIS_MODULE,
 279         .show_info                      = powertecscsi_show_info,
 280         .write_info                     = powertecscsi_set_proc_info,
 281         .name                           = "PowerTec SCSI",
 282         .info                           = powertecscsi_info,
 283         .queuecommand                   = fas216_queue_command,
 284         .eh_host_reset_handler          = fas216_eh_host_reset,
 285         .eh_bus_reset_handler           = fas216_eh_bus_reset,
 286         .eh_device_reset_handler        = fas216_eh_device_reset,
 287         .eh_abort_handler               = fas216_eh_abort,
 288
 289         .can_queue                      = 8,
 290         .this_id                        = 7,
 291         .sg_tablesize                   = SG_MAX_SEGMENTS,
 292         .dma_boundary                   = IOMD_DMA_BOUNDARY,
 293         .cmd_per_lun                    = 2,
 294         .proc_name                      = "powertec",
 295 };
 296
 297 static int powertecscsi_probe(struct expansion_card *ec,
 298                               const struct ecard_id *id)
 299 {
 300         struct Scsi_Host *host;
 301         struct powertec_info *info;
 302         void __iomem *base;
 303         int ret;
 304
 305         ret = ecard_request_resources(ec);
 306         if (ret)
 307                 goto out;
 308
 309         base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
 310         if (!base) {
 311                 ret = -ENOMEM;
 312                 goto out_region;
 313         }
 314
 315         host = scsi_host_alloc(&powertecscsi_template,
 316                                sizeof (struct powertec_info));
 317         if (!host) {
 318                 ret = -ENOMEM;
 319                 goto out_region;
 320         }
 321
 322         ecard_set_drvdata(ec, host);
 323
 324         info = (struct powertec_info *)host->hostdata;
 325         info->base = base;
 326         powertecscsi_terminator_ctl(host, term[ec->slot_no]);
 327
 328         info->ec = ec;
 329         info->info.scsi.io_base         = base + POWERTEC_FAS216_OFFSET;
 330         info->info.scsi.io_shift        = POWERTEC_FAS216_SHIFT;
 331         info->info.scsi.irq             = ec->irq;
 332         info->info.scsi.dma             = ec->dma;
 333         info->info.ifcfg.clockrate      = 40; /* MHz */
 334         info->info.ifcfg.select_timeout = 255;
 335         info->info.ifcfg.asyncperiod    = 200; /* ns */
 336         info->info.ifcfg.sync_max_depth = 7;
 337         info->info.ifcfg.cntl3          = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
 338         info->info.ifcfg.disconnect_ok  = 1;
 339         info->info.ifcfg.wide_max_size  = 0;
 340         info->info.ifcfg.capabilities   = 0;
 341         info->info.dma.setup            = powertecscsi_dma_setup;
 342         info->info.dma.pseudo           = NULL;
 343         info->info.dma.stop             = powertecscsi_dma_stop;
 344
 345         ec->irqaddr     = base + POWERTEC_INTR_STATUS;
 346         ec->irqmask     = POWERTEC_INTR_BIT;
 347
 348         ecard_setirq(ec, &powertecscsi_ops, info);
 349
 350         device_create_file(&ec->dev, &dev_attr_bus_term);
 351
 352         ret = fas216_init(host);
 353         if (ret)
 354                 goto out_free;
 355
 356         ret = request_irq(ec->irq, powertecscsi_intr,
 357                           0, "powertec", info);
 358         if (ret) {
 359                 printk("scsi%d: IRQ%d not free: %d\n",
 360                        host->host_no, ec->irq, ret);
 361                 goto out_release;
 362         }
 363
 364         if (info->info.scsi.dma != NO_DMA) {
 365                 if (request_dma(info->info.scsi.dma, "powertec")) {
 366                         printk("scsi%d: DMA%d not free, using PIO\n",
 367                                host->host_no, info->info.scsi.dma);
 368                         info->info.scsi.dma = NO_DMA;
 369                 } else {
 370                         set_dma_speed(info->info.scsi.dma, 180);
 371                         info->info.ifcfg.capabilities |= FASCAP_DMA;
 372                 }
 373         }
 374
 375         ret = fas216_add(host, &ec->dev);
 376         if (ret == 0)
 377                 goto out;
 378
 379         if (info->info.scsi.dma != NO_DMA)
 380                 free_dma(info->info.scsi.dma);
 381         free_irq(ec->irq, host);
 382
 383  out_release:
 384         fas216_release(host);
 385
 386  out_free:
 387         device_remove_file(&ec->dev, &dev_attr_bus_term);
 388         scsi_host_put(host);
 389
 390  out_region:
 391         ecard_release_resources(ec);
 392
 393  out:
 394         return ret;
 395 }
 396
 397 static void powertecscsi_remove(struct expansion_card *ec)
 398 {
 399         struct Scsi_Host *host = ecard_get_drvdata(ec);
 400         struct powertec_info *info = (struct powertec_info *)host->hostdata;
 401
 402         ecard_set_drvdata(ec, NULL);
 403         fas216_remove(host);
 404
 405         device_remove_file(&ec->dev, &dev_attr_bus_term);
 406
 407         if (info->info.scsi.dma != NO_DMA)
 408                 free_dma(info->info.scsi.dma);
 409         free_irq(ec->irq, info);
 410
 411         fas216_release(host);
 412         scsi_host_put(host);
 413         ecard_release_resources(ec);
 414 }
 415
 416 static const struct ecard_id powertecscsi_cids[] = {
 417         { MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI },
 418         { 0xffff, 0xffff },
 419 };
 420
 421 static struct ecard_driver powertecscsi_driver = {
 422         .probe          = powertecscsi_probe,
 423         .remove         = powertecscsi_remove,
 424         .id_table       = powertecscsi_cids,
 425         .drv = {
 426                 .name           = "powertecscsi",
 427         },
 428 };
 429
 430 static int __init powertecscsi_init(void)
 431 {
 432         return ecard_register_driver(&powertecscsi_driver);
 433 }
 434
 435 static void __exit powertecscsi_exit(void)
 436 {
 437         ecard_remove_driver(&powertecscsi_driver);
 438 }
 439
 440 module_init(powertecscsi_init);
 441 module_exit(powertecscsi_exit);
 442
 443 MODULE_AUTHOR("Russell King");
 444 MODULE_DESCRIPTION("Powertec SCSI driver");
 445 module_param_array(term, int, NULL, 0);
 446 MODULE_PARM_DESC(term, "SCSI bus termination");
 447 MODULE_LICENSE("GPL");