ahci: don't ignore result code of ahci_reset_controller()
[sfrench/cifs-2.6.git] / drivers / pci / host / pci-mvebu.c
1 /*
2  * PCIe driver for Marvell Armada 370 and Armada XP SoCs
3  *
4  * Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
5  *
6  * This file is licensed under the terms of the GNU General Public
7  * License version 2.  This program is licensed "as is" without any
8  * warranty of any kind, whether express or implied.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/pci.h>
13 #include <linux/clk.h>
14 #include <linux/delay.h>
15 #include <linux/gpio.h>
16 #include <linux/init.h>
17 #include <linux/mbus.h>
18 #include <linux/msi.h>
19 #include <linux/slab.h>
20 #include <linux/platform_device.h>
21 #include <linux/of_address.h>
22 #include <linux/of_irq.h>
23 #include <linux/of_gpio.h>
24 #include <linux/of_pci.h>
25 #include <linux/of_platform.h>
26
27 /*
28  * PCIe unit register offsets.
29  */
30 #define PCIE_DEV_ID_OFF         0x0000
31 #define PCIE_CMD_OFF            0x0004
32 #define PCIE_DEV_REV_OFF        0x0008
33 #define PCIE_BAR_LO_OFF(n)      (0x0010 + ((n) << 3))
34 #define PCIE_BAR_HI_OFF(n)      (0x0014 + ((n) << 3))
35 #define PCIE_CAP_PCIEXP         0x0060
36 #define PCIE_HEADER_LOG_4_OFF   0x0128
37 #define PCIE_BAR_CTRL_OFF(n)    (0x1804 + (((n) - 1) * 4))
38 #define PCIE_WIN04_CTRL_OFF(n)  (0x1820 + ((n) << 4))
39 #define PCIE_WIN04_BASE_OFF(n)  (0x1824 + ((n) << 4))
40 #define PCIE_WIN04_REMAP_OFF(n) (0x182c + ((n) << 4))
41 #define PCIE_WIN5_CTRL_OFF      0x1880
42 #define PCIE_WIN5_BASE_OFF      0x1884
43 #define PCIE_WIN5_REMAP_OFF     0x188c
44 #define PCIE_CONF_ADDR_OFF      0x18f8
45 #define  PCIE_CONF_ADDR_EN              0x80000000
46 #define  PCIE_CONF_REG(r)               ((((r) & 0xf00) << 16) | ((r) & 0xfc))
47 #define  PCIE_CONF_BUS(b)               (((b) & 0xff) << 16)
48 #define  PCIE_CONF_DEV(d)               (((d) & 0x1f) << 11)
49 #define  PCIE_CONF_FUNC(f)              (((f) & 0x7) << 8)
50 #define  PCIE_CONF_ADDR(bus, devfn, where) \
51         (PCIE_CONF_BUS(bus) | PCIE_CONF_DEV(PCI_SLOT(devfn))    | \
52          PCIE_CONF_FUNC(PCI_FUNC(devfn)) | PCIE_CONF_REG(where) | \
53          PCIE_CONF_ADDR_EN)
54 #define PCIE_CONF_DATA_OFF      0x18fc
55 #define PCIE_MASK_OFF           0x1910
56 #define  PCIE_MASK_ENABLE_INTS          0x0f000000
57 #define PCIE_CTRL_OFF           0x1a00
58 #define  PCIE_CTRL_X1_MODE              0x0001
59 #define PCIE_STAT_OFF           0x1a04
60 #define  PCIE_STAT_BUS                  0xff00
61 #define  PCIE_STAT_DEV                  0x1f0000
62 #define  PCIE_STAT_LINK_DOWN            BIT(0)
63 #define PCIE_RC_RTSTA           0x1a14
64 #define PCIE_DEBUG_CTRL         0x1a60
65 #define  PCIE_DEBUG_SOFT_RESET          BIT(20)
66
67 enum {
68         PCISWCAP = PCI_BRIDGE_CONTROL + 2,
69         PCISWCAP_EXP_LIST_ID    = PCISWCAP + PCI_CAP_LIST_ID,
70         PCISWCAP_EXP_DEVCAP     = PCISWCAP + PCI_EXP_DEVCAP,
71         PCISWCAP_EXP_DEVCTL     = PCISWCAP + PCI_EXP_DEVCTL,
72         PCISWCAP_EXP_LNKCAP     = PCISWCAP + PCI_EXP_LNKCAP,
73         PCISWCAP_EXP_LNKCTL     = PCISWCAP + PCI_EXP_LNKCTL,
74         PCISWCAP_EXP_SLTCAP     = PCISWCAP + PCI_EXP_SLTCAP,
75         PCISWCAP_EXP_SLTCTL     = PCISWCAP + PCI_EXP_SLTCTL,
76         PCISWCAP_EXP_RTCTL      = PCISWCAP + PCI_EXP_RTCTL,
77         PCISWCAP_EXP_RTSTA      = PCISWCAP + PCI_EXP_RTSTA,
78         PCISWCAP_EXP_DEVCAP2    = PCISWCAP + PCI_EXP_DEVCAP2,
79         PCISWCAP_EXP_DEVCTL2    = PCISWCAP + PCI_EXP_DEVCTL2,
80         PCISWCAP_EXP_LNKCAP2    = PCISWCAP + PCI_EXP_LNKCAP2,
81         PCISWCAP_EXP_LNKCTL2    = PCISWCAP + PCI_EXP_LNKCTL2,
82         PCISWCAP_EXP_SLTCAP2    = PCISWCAP + PCI_EXP_SLTCAP2,
83         PCISWCAP_EXP_SLTCTL2    = PCISWCAP + PCI_EXP_SLTCTL2,
84 };
85
86 /* PCI configuration space of a PCI-to-PCI bridge */
87 struct mvebu_sw_pci_bridge {
88         u16 vendor;
89         u16 device;
90         u16 command;
91         u16 status;
92         u16 class;
93         u8 interface;
94         u8 revision;
95         u8 bist;
96         u8 header_type;
97         u8 latency_timer;
98         u8 cache_line_size;
99         u32 bar[2];
100         u8 primary_bus;
101         u8 secondary_bus;
102         u8 subordinate_bus;
103         u8 secondary_latency_timer;
104         u8 iobase;
105         u8 iolimit;
106         u16 secondary_status;
107         u16 membase;
108         u16 memlimit;
109         u16 iobaseupper;
110         u16 iolimitupper;
111         u32 romaddr;
112         u8 intline;
113         u8 intpin;
114         u16 bridgectrl;
115
116         /* PCI express capability */
117         u32 pcie_sltcap;
118         u16 pcie_devctl;
119         u16 pcie_rtctl;
120 };
121
122 struct mvebu_pcie_port;
123
124 /* Structure representing all PCIe interfaces */
125 struct mvebu_pcie {
126         struct platform_device *pdev;
127         struct mvebu_pcie_port *ports;
128         struct msi_controller *msi;
129         struct resource io;
130         struct resource realio;
131         struct resource mem;
132         struct resource busn;
133         int nports;
134 };
135
136 struct mvebu_pcie_window {
137         phys_addr_t base;
138         phys_addr_t remap;
139         size_t size;
140 };
141
142 /* Structure representing one PCIe interface */
143 struct mvebu_pcie_port {
144         char *name;
145         void __iomem *base;
146         u32 port;
147         u32 lane;
148         int devfn;
149         unsigned int mem_target;
150         unsigned int mem_attr;
151         unsigned int io_target;
152         unsigned int io_attr;
153         struct clk *clk;
154         struct gpio_desc *reset_gpio;
155         char *reset_name;
156         struct mvebu_sw_pci_bridge bridge;
157         struct device_node *dn;
158         struct mvebu_pcie *pcie;
159         struct mvebu_pcie_window memwin;
160         struct mvebu_pcie_window iowin;
161         u32 saved_pcie_stat;
162 };
163
164 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
165 {
166         writel(val, port->base + reg);
167 }
168
169 static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg)
170 {
171         return readl(port->base + reg);
172 }
173
174 static inline bool mvebu_has_ioport(struct mvebu_pcie_port *port)
175 {
176         return port->io_target != -1 && port->io_attr != -1;
177 }
178
179 static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port)
180 {
181         return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
182 }
183
184 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr)
185 {
186         u32 stat;
187
188         stat = mvebu_readl(port, PCIE_STAT_OFF);
189         stat &= ~PCIE_STAT_BUS;
190         stat |= nr << 8;
191         mvebu_writel(port, stat, PCIE_STAT_OFF);
192 }
193
194 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr)
195 {
196         u32 stat;
197
198         stat = mvebu_readl(port, PCIE_STAT_OFF);
199         stat &= ~PCIE_STAT_DEV;
200         stat |= nr << 16;
201         mvebu_writel(port, stat, PCIE_STAT_OFF);
202 }
203
204 /*
205  * Setup PCIE BARs and Address Decode Wins:
206  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
207  * WIN[0-3] -> DRAM bank[0-3]
208  */
209 static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port)
210 {
211         const struct mbus_dram_target_info *dram;
212         u32 size;
213         int i;
214
215         dram = mv_mbus_dram_info();
216
217         /* First, disable and clear BARs and windows. */
218         for (i = 1; i < 3; i++) {
219                 mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i));
220                 mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i));
221                 mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i));
222         }
223
224         for (i = 0; i < 5; i++) {
225                 mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i));
226                 mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i));
227                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
228         }
229
230         mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF);
231         mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF);
232         mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF);
233
234         /* Setup windows for DDR banks.  Count total DDR size on the fly. */
235         size = 0;
236         for (i = 0; i < dram->num_cs; i++) {
237                 const struct mbus_dram_window *cs = dram->cs + i;
238
239                 mvebu_writel(port, cs->base & 0xffff0000,
240                              PCIE_WIN04_BASE_OFF(i));
241                 mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i));
242                 mvebu_writel(port,
243                              ((cs->size - 1) & 0xffff0000) |
244                              (cs->mbus_attr << 8) |
245                              (dram->mbus_dram_target_id << 4) | 1,
246                              PCIE_WIN04_CTRL_OFF(i));
247
248                 size += cs->size;
249         }
250
251         /* Round up 'size' to the nearest power of two. */
252         if ((size & (size - 1)) != 0)
253                 size = 1 << fls(size);
254
255         /* Setup BAR[1] to all DRAM banks. */
256         mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1));
257         mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1));
258         mvebu_writel(port, ((size - 1) & 0xffff0000) | 1,
259                      PCIE_BAR_CTRL_OFF(1));
260 }
261
262 static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
263 {
264         u32 cmd, mask;
265
266         /* Point PCIe unit MBUS decode windows to DRAM space. */
267         mvebu_pcie_setup_wins(port);
268
269         /* Master + slave enable. */
270         cmd = mvebu_readl(port, PCIE_CMD_OFF);
271         cmd |= PCI_COMMAND_IO;
272         cmd |= PCI_COMMAND_MEMORY;
273         cmd |= PCI_COMMAND_MASTER;
274         mvebu_writel(port, cmd, PCIE_CMD_OFF);
275
276         /* Enable interrupt lines A-D. */
277         mask = mvebu_readl(port, PCIE_MASK_OFF);
278         mask |= PCIE_MASK_ENABLE_INTS;
279         mvebu_writel(port, mask, PCIE_MASK_OFF);
280 }
281
282 static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port,
283                                  struct pci_bus *bus,
284                                  u32 devfn, int where, int size, u32 *val)
285 {
286         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
287
288         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
289                      PCIE_CONF_ADDR_OFF);
290
291         switch (size) {
292         case 1:
293                 *val = readb_relaxed(conf_data + (where & 3));
294                 break;
295         case 2:
296                 *val = readw_relaxed(conf_data + (where & 2));
297                 break;
298         case 4:
299                 *val = readl_relaxed(conf_data);
300                 break;
301         }
302
303         return PCIBIOS_SUCCESSFUL;
304 }
305
306 static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
307                                  struct pci_bus *bus,
308                                  u32 devfn, int where, int size, u32 val)
309 {
310         void __iomem *conf_data = port->base + PCIE_CONF_DATA_OFF;
311
312         mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where),
313                      PCIE_CONF_ADDR_OFF);
314
315         switch (size) {
316         case 1:
317                 writeb(val, conf_data + (where & 3));
318                 break;
319         case 2:
320                 writew(val, conf_data + (where & 2));
321                 break;
322         case 4:
323                 writel(val, conf_data);
324                 break;
325         default:
326                 return PCIBIOS_BAD_REGISTER_NUMBER;
327         }
328
329         return PCIBIOS_SUCCESSFUL;
330 }
331
332 /*
333  * Remove windows, starting from the largest ones to the smallest
334  * ones.
335  */
336 static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
337                                    phys_addr_t base, size_t size)
338 {
339         while (size) {
340                 size_t sz = 1 << (fls(size) - 1);
341
342                 mvebu_mbus_del_window(base, sz);
343                 base += sz;
344                 size -= sz;
345         }
346 }
347
348 /*
349  * MBus windows can only have a power of two size, but PCI BARs do not
350  * have this constraint. Therefore, we have to split the PCI BAR into
351  * areas each having a power of two size. We start from the largest
352  * one (i.e highest order bit set in the size).
353  */
354 static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
355                                    unsigned int target, unsigned int attribute,
356                                    phys_addr_t base, size_t size,
357                                    phys_addr_t remap)
358 {
359         size_t size_mapped = 0;
360
361         while (size) {
362                 size_t sz = 1 << (fls(size) - 1);
363                 int ret;
364
365                 ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
366                                                         sz, remap);
367                 if (ret) {
368                         phys_addr_t end = base + sz - 1;
369
370                         dev_err(&port->pcie->pdev->dev,
371                                 "Could not create MBus window at [mem %pa-%pa]: %d\n",
372                                 &base, &end, ret);
373                         mvebu_pcie_del_windows(port, base - size_mapped,
374                                                size_mapped);
375                         return;
376                 }
377
378                 size -= sz;
379                 size_mapped += sz;
380                 base += sz;
381                 if (remap != MVEBU_MBUS_NO_REMAP)
382                         remap += sz;
383         }
384 }
385
386 static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
387                                   unsigned int target, unsigned int attribute,
388                                   const struct mvebu_pcie_window *desired,
389                                   struct mvebu_pcie_window *cur)
390 {
391         if (desired->base == cur->base && desired->remap == cur->remap &&
392             desired->size == cur->size)
393                 return;
394
395         if (cur->size != 0) {
396                 mvebu_pcie_del_windows(port, cur->base, cur->size);
397                 cur->size = 0;
398                 cur->base = 0;
399
400                 /*
401                  * If something tries to change the window while it is enabled
402                  * the change will not be done atomically. That would be
403                  * difficult to do in the general case.
404                  */
405         }
406
407         if (desired->size == 0)
408                 return;
409
410         mvebu_pcie_add_windows(port, target, attribute, desired->base,
411                                desired->size, desired->remap);
412         *cur = *desired;
413 }
414
415 static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
416 {
417         struct mvebu_pcie_window desired = {};
418
419         /* Are the new iobase/iolimit values invalid? */
420         if (port->bridge.iolimit < port->bridge.iobase ||
421             port->bridge.iolimitupper < port->bridge.iobaseupper ||
422             !(port->bridge.command & PCI_COMMAND_IO)) {
423                 mvebu_pcie_set_window(port, port->io_target, port->io_attr,
424                                       &desired, &port->iowin);
425                 return;
426         }
427
428         if (!mvebu_has_ioport(port)) {
429                 dev_WARN(&port->pcie->pdev->dev,
430                          "Attempt to set IO when IO is disabled\n");
431                 return;
432         }
433
434         /*
435          * We read the PCI-to-PCI bridge emulated registers, and
436          * calculate the base address and size of the address decoding
437          * window to setup, according to the PCI-to-PCI bridge
438          * specifications. iobase is the bus address, port->iowin_base
439          * is the CPU address.
440          */
441         desired.remap = ((port->bridge.iobase & 0xF0) << 8) |
442                         (port->bridge.iobaseupper << 16);
443         desired.base = port->pcie->io.start + desired.remap;
444         desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
445                          (port->bridge.iolimitupper << 16)) -
446                         desired.remap) +
447                        1;
448
449         mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
450                               &port->iowin);
451 }
452
453 static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
454 {
455         struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
456
457         /* Are the new membase/memlimit values invalid? */
458         if (port->bridge.memlimit < port->bridge.membase ||
459             !(port->bridge.command & PCI_COMMAND_MEMORY)) {
460                 mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
461                                       &desired, &port->memwin);
462                 return;
463         }
464
465         /*
466          * We read the PCI-to-PCI bridge emulated registers, and
467          * calculate the base address and size of the address decoding
468          * window to setup, according to the PCI-to-PCI bridge
469          * specifications.
470          */
471         desired.base = ((port->bridge.membase & 0xFFF0) << 16);
472         desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
473                        desired.base + 1;
474
475         mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
476                               &port->memwin);
477 }
478
479 /*
480  * Initialize the configuration space of the PCI-to-PCI bridge
481  * associated with the given PCIe interface.
482  */
483 static void mvebu_sw_pci_bridge_init(struct mvebu_pcie_port *port)
484 {
485         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
486
487         memset(bridge, 0, sizeof(struct mvebu_sw_pci_bridge));
488
489         bridge->class = PCI_CLASS_BRIDGE_PCI;
490         bridge->vendor = PCI_VENDOR_ID_MARVELL;
491         bridge->device = mvebu_readl(port, PCIE_DEV_ID_OFF) >> 16;
492         bridge->revision = mvebu_readl(port, PCIE_DEV_REV_OFF) & 0xff;
493         bridge->header_type = PCI_HEADER_TYPE_BRIDGE;
494         bridge->cache_line_size = 0x10;
495
496         /* We support 32 bits I/O addressing */
497         bridge->iobase = PCI_IO_RANGE_TYPE_32;
498         bridge->iolimit = PCI_IO_RANGE_TYPE_32;
499
500         /* Add capabilities */
501         bridge->status = PCI_STATUS_CAP_LIST;
502 }
503
504 /*
505  * Read the configuration space of the PCI-to-PCI bridge associated to
506  * the given PCIe interface.
507  */
508 static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
509                                   unsigned int where, int size, u32 *value)
510 {
511         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
512
513         switch (where & ~3) {
514         case PCI_VENDOR_ID:
515                 *value = bridge->device << 16 | bridge->vendor;
516                 break;
517
518         case PCI_COMMAND:
519                 *value = bridge->command | bridge->status << 16;
520                 break;
521
522         case PCI_CLASS_REVISION:
523                 *value = bridge->class << 16 | bridge->interface << 8 |
524                          bridge->revision;
525                 break;
526
527         case PCI_CACHE_LINE_SIZE:
528                 *value = bridge->bist << 24 | bridge->header_type << 16 |
529                          bridge->latency_timer << 8 | bridge->cache_line_size;
530                 break;
531
532         case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
533                 *value = bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4];
534                 break;
535
536         case PCI_PRIMARY_BUS:
537                 *value = (bridge->secondary_latency_timer << 24 |
538                           bridge->subordinate_bus         << 16 |
539                           bridge->secondary_bus           <<  8 |
540                           bridge->primary_bus);
541                 break;
542
543         case PCI_IO_BASE:
544                 if (!mvebu_has_ioport(port))
545                         *value = bridge->secondary_status << 16;
546                 else
547                         *value = (bridge->secondary_status << 16 |
548                                   bridge->iolimit          <<  8 |
549                                   bridge->iobase);
550                 break;
551
552         case PCI_MEMORY_BASE:
553                 *value = (bridge->memlimit << 16 | bridge->membase);
554                 break;
555
556         case PCI_PREF_MEMORY_BASE:
557                 *value = 0;
558                 break;
559
560         case PCI_IO_BASE_UPPER16:
561                 *value = (bridge->iolimitupper << 16 | bridge->iobaseupper);
562                 break;
563
564         case PCI_CAPABILITY_LIST:
565                 *value = PCISWCAP;
566                 break;
567
568         case PCI_ROM_ADDRESS1:
569                 *value = 0;
570                 break;
571
572         case PCI_INTERRUPT_LINE:
573                 /* LINE PIN MIN_GNT MAX_LAT */
574                 *value = 0;
575                 break;
576
577         case PCISWCAP_EXP_LIST_ID:
578                 /* Set PCIe v2, root port, slot support */
579                 *value = (PCI_EXP_TYPE_ROOT_PORT << 4 | 2 |
580                           PCI_EXP_FLAGS_SLOT) << 16 | PCI_CAP_ID_EXP;
581                 break;
582
583         case PCISWCAP_EXP_DEVCAP:
584                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCAP);
585                 break;
586
587         case PCISWCAP_EXP_DEVCTL:
588                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL) &
589                                  ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
590                                    PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
591                 *value |= bridge->pcie_devctl;
592                 break;
593
594         case PCISWCAP_EXP_LNKCAP:
595                 /*
596                  * PCIe requires the clock power management capability to be
597                  * hard-wired to zero for downstream ports
598                  */
599                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCAP) &
600                          ~PCI_EXP_LNKCAP_CLKPM;
601                 break;
602
603         case PCISWCAP_EXP_LNKCTL:
604                 *value = mvebu_readl(port, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
605                 break;
606
607         case PCISWCAP_EXP_SLTCAP:
608                 *value = bridge->pcie_sltcap;
609                 break;
610
611         case PCISWCAP_EXP_SLTCTL:
612                 *value = PCI_EXP_SLTSTA_PDS << 16;
613                 break;
614
615         case PCISWCAP_EXP_RTCTL:
616                 *value = bridge->pcie_rtctl;
617                 break;
618
619         case PCISWCAP_EXP_RTSTA:
620                 *value = mvebu_readl(port, PCIE_RC_RTSTA);
621                 break;
622
623         /* PCIe requires the v2 fields to be hard-wired to zero */
624         case PCISWCAP_EXP_DEVCAP2:
625         case PCISWCAP_EXP_DEVCTL2:
626         case PCISWCAP_EXP_LNKCAP2:
627         case PCISWCAP_EXP_LNKCTL2:
628         case PCISWCAP_EXP_SLTCAP2:
629         case PCISWCAP_EXP_SLTCTL2:
630         default:
631                 /*
632                  * PCI defines configuration read accesses to reserved or
633                  * unimplemented registers to read as zero and complete
634                  * normally.
635                  */
636                 *value = 0;
637                 return PCIBIOS_SUCCESSFUL;
638         }
639
640         if (size == 2)
641                 *value = (*value >> (8 * (where & 3))) & 0xffff;
642         else if (size == 1)
643                 *value = (*value >> (8 * (where & 3))) & 0xff;
644
645         return PCIBIOS_SUCCESSFUL;
646 }
647
648 /* Write to the PCI-to-PCI bridge configuration space */
649 static int mvebu_sw_pci_bridge_write(struct mvebu_pcie_port *port,
650                                      unsigned int where, int size, u32 value)
651 {
652         struct mvebu_sw_pci_bridge *bridge = &port->bridge;
653         u32 mask, reg;
654         int err;
655
656         if (size == 4)
657                 mask = 0x0;
658         else if (size == 2)
659                 mask = ~(0xffff << ((where & 3) * 8));
660         else if (size == 1)
661                 mask = ~(0xff << ((where & 3) * 8));
662         else
663                 return PCIBIOS_BAD_REGISTER_NUMBER;
664
665         err = mvebu_sw_pci_bridge_read(port, where & ~3, 4, &reg);
666         if (err)
667                 return err;
668
669         value = (reg & mask) | value << ((where & 3) * 8);
670
671         switch (where & ~3) {
672         case PCI_COMMAND:
673         {
674                 u32 old = bridge->command;
675
676                 if (!mvebu_has_ioport(port))
677                         value &= ~PCI_COMMAND_IO;
678
679                 bridge->command = value & 0xffff;
680                 if ((old ^ bridge->command) & PCI_COMMAND_IO)
681                         mvebu_pcie_handle_iobase_change(port);
682                 if ((old ^ bridge->command) & PCI_COMMAND_MEMORY)
683                         mvebu_pcie_handle_membase_change(port);
684                 break;
685         }
686
687         case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_1:
688                 bridge->bar[((where & ~3) - PCI_BASE_ADDRESS_0) / 4] = value;
689                 break;
690
691         case PCI_IO_BASE:
692                 /*
693                  * We also keep bit 1 set, it is a read-only bit that
694                  * indicates we support 32 bits addressing for the
695                  * I/O
696                  */
697                 bridge->iobase = (value & 0xff) | PCI_IO_RANGE_TYPE_32;
698                 bridge->iolimit = ((value >> 8) & 0xff) | PCI_IO_RANGE_TYPE_32;
699                 mvebu_pcie_handle_iobase_change(port);
700                 break;
701
702         case PCI_MEMORY_BASE:
703                 bridge->membase = value & 0xffff;
704                 bridge->memlimit = value >> 16;
705                 mvebu_pcie_handle_membase_change(port);
706                 break;
707
708         case PCI_IO_BASE_UPPER16:
709                 bridge->iobaseupper = value & 0xffff;
710                 bridge->iolimitupper = value >> 16;
711                 mvebu_pcie_handle_iobase_change(port);
712                 break;
713
714         case PCI_PRIMARY_BUS:
715                 bridge->primary_bus             = value & 0xff;
716                 bridge->secondary_bus           = (value >> 8) & 0xff;
717                 bridge->subordinate_bus         = (value >> 16) & 0xff;
718                 bridge->secondary_latency_timer = (value >> 24) & 0xff;
719                 mvebu_pcie_set_local_bus_nr(port, bridge->secondary_bus);
720                 break;
721
722         case PCISWCAP_EXP_DEVCTL:
723                 /*
724                  * Armada370 data says these bits must always
725                  * be zero when in root complex mode.
726                  */
727                 value &= ~(PCI_EXP_DEVCTL_URRE | PCI_EXP_DEVCTL_FERE |
728                            PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_CERE);
729
730                 /*
731                  * If the mask is 0xffff0000, then we only want to write
732                  * the device control register, rather than clearing the
733                  * RW1C bits in the device status register.  Mask out the
734                  * status register bits.
735                  */
736                 if (mask == 0xffff0000)
737                         value &= 0xffff;
738
739                 mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_DEVCTL);
740                 break;
741
742         case PCISWCAP_EXP_LNKCTL:
743                 /*
744                  * If we don't support CLKREQ, we must ensure that the
745                  * CLKREQ enable bit always reads zero.  Since we haven't
746                  * had this capability, and it's dependent on board wiring,
747                  * disable it for the time being.
748                  */
749                 value &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
750
751                 /*
752                  * If the mask is 0xffff0000, then we only want to write
753                  * the link control register, rather than clearing the
754                  * RW1C bits in the link status register.  Mask out the
755                  * RW1C status register bits.
756                  */
757                 if (mask == 0xffff0000)
758                         value &= ~((PCI_EXP_LNKSTA_LABS |
759                                     PCI_EXP_LNKSTA_LBMS) << 16);
760
761                 mvebu_writel(port, value, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL);
762                 break;
763
764         case PCISWCAP_EXP_RTSTA:
765                 mvebu_writel(port, value, PCIE_RC_RTSTA);
766                 break;
767
768         default:
769                 break;
770         }
771
772         return PCIBIOS_SUCCESSFUL;
773 }
774
775 static inline struct mvebu_pcie *sys_to_pcie(struct pci_sys_data *sys)
776 {
777         return sys->private_data;
778 }
779
780 static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
781                                                     struct pci_bus *bus,
782                                                     int devfn)
783 {
784         int i;
785
786         for (i = 0; i < pcie->nports; i++) {
787                 struct mvebu_pcie_port *port = &pcie->ports[i];
788
789                 if (bus->number == 0 && port->devfn == devfn)
790                         return port;
791                 if (bus->number != 0 &&
792                     bus->number >= port->bridge.secondary_bus &&
793                     bus->number <= port->bridge.subordinate_bus)
794                         return port;
795         }
796
797         return NULL;
798 }
799
800 /* PCI configuration space write function */
801 static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
802                               int where, int size, u32 val)
803 {
804         struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
805         struct mvebu_pcie_port *port;
806         int ret;
807
808         port = mvebu_pcie_find_port(pcie, bus, devfn);
809         if (!port)
810                 return PCIBIOS_DEVICE_NOT_FOUND;
811
812         /* Access the emulated PCI-to-PCI bridge */
813         if (bus->number == 0)
814                 return mvebu_sw_pci_bridge_write(port, where, size, val);
815
816         if (!mvebu_pcie_link_up(port))
817                 return PCIBIOS_DEVICE_NOT_FOUND;
818
819         /* Access the real PCIe interface */
820         ret = mvebu_pcie_hw_wr_conf(port, bus, devfn,
821                                     where, size, val);
822
823         return ret;
824 }
825
826 /* PCI configuration space read function */
827 static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
828                               int size, u32 *val)
829 {
830         struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
831         struct mvebu_pcie_port *port;
832         int ret;
833
834         port = mvebu_pcie_find_port(pcie, bus, devfn);
835         if (!port) {
836                 *val = 0xffffffff;
837                 return PCIBIOS_DEVICE_NOT_FOUND;
838         }
839
840         /* Access the emulated PCI-to-PCI bridge */
841         if (bus->number == 0)
842                 return mvebu_sw_pci_bridge_read(port, where, size, val);
843
844         if (!mvebu_pcie_link_up(port)) {
845                 *val = 0xffffffff;
846                 return PCIBIOS_DEVICE_NOT_FOUND;
847         }
848
849         /* Access the real PCIe interface */
850         ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
851                                     where, size, val);
852
853         return ret;
854 }
855
856 static struct pci_ops mvebu_pcie_ops = {
857         .read = mvebu_pcie_rd_conf,
858         .write = mvebu_pcie_wr_conf,
859 };
860
861 static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
862 {
863         struct mvebu_pcie *pcie = sys_to_pcie(sys);
864         int err, i;
865
866         pcie->mem.name = "PCI MEM";
867         pcie->realio.name = "PCI I/O";
868
869         if (resource_size(&pcie->realio) != 0)
870                 pci_add_resource_offset(&sys->resources, &pcie->realio,
871                                         sys->io_offset);
872
873         pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
874         pci_add_resource(&sys->resources, &pcie->busn);
875
876         err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
877         if (err)
878                 return 0;
879
880         for (i = 0; i < pcie->nports; i++) {
881                 struct mvebu_pcie_port *port = &pcie->ports[i];
882
883                 if (!port->base)
884                         continue;
885                 mvebu_pcie_setup_hw(port);
886         }
887
888         return 1;
889 }
890
891 static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
892                                                  const struct resource *res,
893                                                  resource_size_t start,
894                                                  resource_size_t size,
895                                                  resource_size_t align)
896 {
897         if (dev->bus->number != 0)
898                 return start;
899
900         /*
901          * On the PCI-to-PCI bridge side, the I/O windows must have at
902          * least a 64 KB size and the memory windows must have at
903          * least a 1 MB size. Moreover, MBus windows need to have a
904          * base address aligned on their size, and their size must be
905          * a power of two. This means that if the BAR doesn't have a
906          * power of two size, several MBus windows will actually be
907          * created. We need to ensure that the biggest MBus window
908          * (which will be the first one) is aligned on its size, which
909          * explains the rounddown_pow_of_two() being done here.
910          */
911         if (res->flags & IORESOURCE_IO)
912                 return round_up(start, max_t(resource_size_t, SZ_64K,
913                                              rounddown_pow_of_two(size)));
914         else if (res->flags & IORESOURCE_MEM)
915                 return round_up(start, max_t(resource_size_t, SZ_1M,
916                                              rounddown_pow_of_two(size)));
917         else
918                 return start;
919 }
920
921 static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
922 {
923         struct hw_pci hw;
924
925         memset(&hw, 0, sizeof(hw));
926
927 #ifdef CONFIG_PCI_MSI
928         hw.msi_ctrl = pcie->msi;
929 #endif
930
931         hw.nr_controllers = 1;
932         hw.private_data   = (void **)&pcie;
933         hw.setup          = mvebu_pcie_setup;
934         hw.map_irq        = of_irq_parse_and_map_pci;
935         hw.ops            = &mvebu_pcie_ops;
936         hw.align_resource = mvebu_pcie_align_resource;
937
938         pci_common_init_dev(&pcie->pdev->dev, &hw);
939 }
940
941 /*
942  * Looks up the list of register addresses encoded into the reg =
943  * <...> property for one that matches the given port/lane. Once
944  * found, maps it.
945  */
946 static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev,
947                                               struct device_node *np,
948                                               struct mvebu_pcie_port *port)
949 {
950         struct resource regs;
951         int ret = 0;
952
953         ret = of_address_to_resource(np, 0, &regs);
954         if (ret)
955                 return ERR_PTR(ret);
956
957         return devm_ioremap_resource(&pdev->dev, &regs);
958 }
959
960 #define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
961 #define    DT_TYPE_IO                 0x1
962 #define    DT_TYPE_MEM32              0x2
963 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
964 #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
965
966 static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
967                               unsigned long type,
968                               unsigned int *tgt,
969                               unsigned int *attr)
970 {
971         const int na = 3, ns = 2;
972         const __be32 *range;
973         int rlen, nranges, rangesz, pna, i;
974
975         *tgt = -1;
976         *attr = -1;
977
978         range = of_get_property(np, "ranges", &rlen);
979         if (!range)
980                 return -EINVAL;
981
982         pna = of_n_addr_cells(np);
983         rangesz = pna + na + ns;
984         nranges = rlen / sizeof(__be32) / rangesz;
985
986         for (i = 0; i < nranges; i++, range += rangesz) {
987                 u32 flags = of_read_number(range, 1);
988                 u32 slot = of_read_number(range + 1, 1);
989                 u64 cpuaddr = of_read_number(range + na, pna);
990                 unsigned long rtype;
991
992                 if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
993                         rtype = IORESOURCE_IO;
994                 else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
995                         rtype = IORESOURCE_MEM;
996                 else
997                         continue;
998
999                 if (slot == PCI_SLOT(devfn) && type == rtype) {
1000                         *tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
1001                         *attr = DT_CPUADDR_TO_ATTR(cpuaddr);
1002                         return 0;
1003                 }
1004         }
1005
1006         return -ENOENT;
1007 }
1008
1009 #ifdef CONFIG_PM_SLEEP
1010 static int mvebu_pcie_suspend(struct device *dev)
1011 {
1012         struct mvebu_pcie *pcie;
1013         int i;
1014
1015         pcie = dev_get_drvdata(dev);
1016         for (i = 0; i < pcie->nports; i++) {
1017                 struct mvebu_pcie_port *port = pcie->ports + i;
1018                 port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
1019         }
1020
1021         return 0;
1022 }
1023
1024 static int mvebu_pcie_resume(struct device *dev)
1025 {
1026         struct mvebu_pcie *pcie;
1027         int i;
1028
1029         pcie = dev_get_drvdata(dev);
1030         for (i = 0; i < pcie->nports; i++) {
1031                 struct mvebu_pcie_port *port = pcie->ports + i;
1032                 mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
1033                 mvebu_pcie_setup_hw(port);
1034         }
1035
1036         return 0;
1037 }
1038 #endif
1039
1040 static void mvebu_pcie_port_clk_put(void *data)
1041 {
1042         struct mvebu_pcie_port *port = data;
1043
1044         clk_put(port->clk);
1045 }
1046
1047 static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
1048         struct mvebu_pcie_port *port, struct device_node *child)
1049 {
1050         struct device *dev = &pcie->pdev->dev;
1051         enum of_gpio_flags flags;
1052         int reset_gpio, ret;
1053
1054         port->pcie = pcie;
1055
1056         if (of_property_read_u32(child, "marvell,pcie-port", &port->port)) {
1057                 dev_warn(dev, "ignoring %s, missing pcie-port property\n",
1058                          of_node_full_name(child));
1059                 goto skip;
1060         }
1061
1062         if (of_property_read_u32(child, "marvell,pcie-lane", &port->lane))
1063                 port->lane = 0;
1064
1065         port->name = devm_kasprintf(dev, GFP_KERNEL, "pcie%d.%d", port->port,
1066                                     port->lane);
1067         if (!port->name) {
1068                 ret = -ENOMEM;
1069                 goto err;
1070         }
1071
1072         port->devfn = of_pci_get_devfn(child);
1073         if (port->devfn < 0)
1074                 goto skip;
1075
1076         ret = mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_MEM,
1077                                  &port->mem_target, &port->mem_attr);
1078         if (ret < 0) {
1079                 dev_err(dev, "%s: cannot get tgt/attr for mem window\n",
1080                         port->name);
1081                 goto skip;
1082         }
1083
1084         if (resource_size(&pcie->io) != 0) {
1085                 mvebu_get_tgt_attr(dev->of_node, port->devfn, IORESOURCE_IO,
1086                                    &port->io_target, &port->io_attr);
1087         } else {
1088                 port->io_target = -1;
1089                 port->io_attr = -1;
1090         }
1091
1092         reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
1093         if (reset_gpio == -EPROBE_DEFER) {
1094                 ret = reset_gpio;
1095                 goto err;
1096         }
1097
1098         if (gpio_is_valid(reset_gpio)) {
1099                 unsigned long gpio_flags;
1100
1101                 port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
1102                                                   port->name);
1103                 if (!port->reset_name) {
1104                         ret = -ENOMEM;
1105                         goto err;
1106                 }
1107
1108                 if (flags & OF_GPIO_ACTIVE_LOW) {
1109                         dev_info(dev, "%s: reset gpio is active low\n",
1110                                  of_node_full_name(child));
1111                         gpio_flags = GPIOF_ACTIVE_LOW |
1112                                      GPIOF_OUT_INIT_LOW;
1113                 } else {
1114                         gpio_flags = GPIOF_OUT_INIT_HIGH;
1115                 }
1116
1117                 ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
1118                                             port->reset_name);
1119                 if (ret) {
1120                         if (ret == -EPROBE_DEFER)
1121                                 goto err;
1122                         goto skip;
1123                 }
1124
1125                 port->reset_gpio = gpio_to_desc(reset_gpio);
1126         }
1127
1128         port->clk = of_clk_get_by_name(child, NULL);
1129         if (IS_ERR(port->clk)) {
1130                 dev_err(dev, "%s: cannot get clock\n", port->name);
1131                 goto skip;
1132         }
1133
1134         ret = devm_add_action(dev, mvebu_pcie_port_clk_put, port);
1135         if (ret < 0) {
1136                 clk_put(port->clk);
1137                 goto err;
1138         }
1139
1140         return 1;
1141
1142 skip:
1143         ret = 0;
1144
1145         /* In the case of skipping, we need to free these */
1146         devm_kfree(dev, port->reset_name);
1147         port->reset_name = NULL;
1148         devm_kfree(dev, port->name);
1149         port->name = NULL;
1150
1151 err:
1152         return ret;
1153 }
1154
1155 /*
1156  * Power up a PCIe port.  PCIe requires the refclk to be stable for 100µs
1157  * prior to releasing PERST.  See table 2-4 in section 2.6.2 AC Specifications
1158  * of the PCI Express Card Electromechanical Specification, 1.1.
1159  */
1160 static int mvebu_pcie_powerup(struct mvebu_pcie_port *port)
1161 {
1162         int ret;
1163
1164         ret = clk_prepare_enable(port->clk);
1165         if (ret < 0)
1166                 return ret;
1167
1168         if (port->reset_gpio) {
1169                 u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
1170
1171                 of_property_read_u32(port->dn, "reset-delay-us",
1172                                      &reset_udelay);
1173
1174                 udelay(100);
1175
1176                 gpiod_set_value_cansleep(port->reset_gpio, 0);
1177                 msleep(reset_udelay / 1000);
1178         }
1179
1180         return 0;
1181 }
1182
1183 /*
1184  * Power down a PCIe port.  Strictly, PCIe requires us to place the card
1185  * in D3hot state before asserting PERST#.
1186  */
1187 static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
1188 {
1189         if (port->reset_gpio)
1190                 gpiod_set_value_cansleep(port->reset_gpio, 1);
1191
1192         clk_disable_unprepare(port->clk);
1193 }
1194
1195 static int mvebu_pcie_probe(struct platform_device *pdev)
1196 {
1197         struct device *dev = &pdev->dev;
1198         struct mvebu_pcie *pcie;
1199         struct device_node *np = dev->of_node;
1200         struct device_node *child;
1201         int num, i, ret;
1202
1203         pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
1204         if (!pcie)
1205                 return -ENOMEM;
1206
1207         pcie->pdev = pdev;
1208         platform_set_drvdata(pdev, pcie);
1209
1210         /* Get the PCIe memory and I/O aperture */
1211         mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
1212         if (resource_size(&pcie->mem) == 0) {
1213                 dev_err(dev, "invalid memory aperture size\n");
1214                 return -EINVAL;
1215         }
1216
1217         mvebu_mbus_get_pcie_io_aperture(&pcie->io);
1218
1219         if (resource_size(&pcie->io) != 0) {
1220                 pcie->realio.flags = pcie->io.flags;
1221                 pcie->realio.start = PCIBIOS_MIN_IO;
1222                 pcie->realio.end = min_t(resource_size_t,
1223                                          IO_SPACE_LIMIT,
1224                                          resource_size(&pcie->io));
1225         } else
1226                 pcie->realio = pcie->io;
1227
1228         /* Get the bus range */
1229         ret = of_pci_parse_bus_range(np, &pcie->busn);
1230         if (ret) {
1231                 dev_err(dev, "failed to parse bus-range property: %d\n", ret);
1232                 return ret;
1233         }
1234
1235         num = of_get_available_child_count(np);
1236
1237         pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
1238         if (!pcie->ports)
1239                 return -ENOMEM;
1240
1241         i = 0;
1242         for_each_available_child_of_node(np, child) {
1243                 struct mvebu_pcie_port *port = &pcie->ports[i];
1244
1245                 ret = mvebu_pcie_parse_port(pcie, port, child);
1246                 if (ret < 0) {
1247                         of_node_put(child);
1248                         return ret;
1249                 } else if (ret == 0) {
1250                         continue;
1251                 }
1252
1253                 port->dn = child;
1254                 i++;
1255         }
1256         pcie->nports = i;
1257
1258         for (i = 0; i < pcie->nports; i++) {
1259                 struct mvebu_pcie_port *port = &pcie->ports[i];
1260
1261                 child = port->dn;
1262                 if (!child)
1263                         continue;
1264
1265                 ret = mvebu_pcie_powerup(port);
1266                 if (ret < 0)
1267                         continue;
1268
1269                 port->base = mvebu_pcie_map_registers(pdev, child, port);
1270                 if (IS_ERR(port->base)) {
1271                         dev_err(dev, "%s: cannot map registers\n", port->name);
1272                         port->base = NULL;
1273                         mvebu_pcie_powerdown(port);
1274                         continue;
1275                 }
1276
1277                 mvebu_pcie_set_local_dev_nr(port, 1);
1278                 mvebu_sw_pci_bridge_init(port);
1279         }
1280
1281         pcie->nports = i;
1282
1283         for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
1284                 pci_ioremap_io(i, pcie->io.start + i);
1285
1286         mvebu_pcie_enable(pcie);
1287
1288         platform_set_drvdata(pdev, pcie);
1289
1290         return 0;
1291 }
1292
1293 static const struct of_device_id mvebu_pcie_of_match_table[] = {
1294         { .compatible = "marvell,armada-xp-pcie", },
1295         { .compatible = "marvell,armada-370-pcie", },
1296         { .compatible = "marvell,dove-pcie", },
1297         { .compatible = "marvell,kirkwood-pcie", },
1298         {},
1299 };
1300
1301 static const struct dev_pm_ops mvebu_pcie_pm_ops = {
1302         SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mvebu_pcie_suspend, mvebu_pcie_resume)
1303 };
1304
1305 static struct platform_driver mvebu_pcie_driver = {
1306         .driver = {
1307                 .name = "mvebu-pcie",
1308                 .of_match_table = mvebu_pcie_of_match_table,
1309                 /* driver unloading/unbinding currently not supported */
1310                 .suppress_bind_attrs = true,
1311                 .pm = &mvebu_pcie_pm_ops,
1312         },
1313         .probe = mvebu_pcie_probe,
1314 };
1315 builtin_platform_driver(mvebu_pcie_driver);