drivers/net/wireless/ti/wl12xx/conf.h

   1 /*
   2  * This file is part of wl12xx
   3  *
   4  * Copyright (C) 2011 Texas Instruments Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * version 2 as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful, but
  11  * WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13  * General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  18  * 02110-1301 USA
  19  *
  20  */
  21
  22 #ifndef __WL12XX_CONF_H__
  23 #define __WL12XX_CONF_H__
  24
  25 /* these are number of channels on the band divided by two, rounded up */
  26 #define CONF_TX_PWR_COMPENSATION_LEN_2 7
  27 #define CONF_TX_PWR_COMPENSATION_LEN_5 18
  28
  29 struct wl12xx_conf_rf {
  30         /*
  31          * Per channel power compensation for 2.4GHz
  32          *
  33          * Range: s8
  34          */
  35         u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
  36
  37         /*
  38          * Per channel power compensation for 5GHz
  39          *
  40          * Range: s8
  41          */
  42         u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
  43 };
  44
  45 struct wl12xx_priv_conf {
  46         struct wl12xx_conf_rf rf;
  47         struct conf_memory_settings mem_wl127x;
  48 };
  49
  50 enum wl12xx_sg_params {
  51         /*
  52         * Configure the min and max time BT gains the antenna
  53         * in WLAN / BT master basic rate
  54         *
  55         * Range: 0 - 255 (ms)
  56         */
  57         WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
  58         WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,
  59
  60         /*
  61         * Configure the min and max time BT gains the antenna
  62         * in WLAN / BT slave basic rate
  63         *
  64         * Range: 0 - 255 (ms)
  65         */
  66         WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
  67         WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,
  68
  69         /*
  70         * Configure the min and max time BT gains the antenna
  71         * in WLAN / BT master EDR
  72         *
  73         * Range: 0 - 255 (ms)
  74         */
  75         WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
  76         WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,
  77
  78         /*
  79         * Configure the min and max time BT gains the antenna
  80         * in WLAN / BT slave EDR
  81         *
  82         * Range: 0 - 255 (ms)
  83         */
  84         WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
  85         WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,
  86
  87         /*
  88         * The maximum time WLAN can gain the antenna
  89         * in WLAN PSM / BT master/slave BR
  90         *
  91         * Range: 0 - 255 (ms)
  92         */
  93         WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
  94         WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,
  95
  96         /*
  97         * The maximum time WLAN can gain the antenna
  98         * in WLAN PSM / BT master/slave EDR
  99         *
 100         * Range: 0 - 255 (ms)
 101         */
 102         WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
 103         WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
 104
 105         /* TODO: explain these values */
 106         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
 107         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
 108         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
 109         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
 110         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
 111         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
 112         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
 113         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
 114
 115         WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
 116         WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
 117         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
 118         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
 119         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
 120         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
 121
 122         /*
 123         * Compensation percentage of probe requests when scan initiated
 124         * during BT voice/ACL link.
 125         *
 126         * Range: 0 - 255 (%)
 127         */
 128         WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
 129
 130         /*
 131         * Compensation percentage of probe requests when active scan initiated
 132         * during BT voice
 133         *
 134         * Range: 0 - 255 (%)
 135         */
 136         WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
 137
 138         /*
 139         * Compensation percentage of WLAN active scan window if initiated
 140         * during BT A2DP
 141         *
 142         * Range: 0 - 1000 (%)
 143         */
 144         WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 145
 146         /*
 147         * Compensation percentage of WLAN passive scan window if initiated
 148         * during BT A2DP BR
 149         *
 150         * Range: 0 - 1000 (%)
 151         */
 152         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,
 153
 154         /*
 155         * Compensation percentage of WLAN passive scan window if initiated
 156         * during BT A2DP EDR
 157         *
 158         * Range: 0 - 1000 (%)
 159         */
 160         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,
 161
 162         /*
 163         * Compensation percentage of WLAN passive scan window if initiated
 164         * during BT voice
 165         *
 166         * Range: 0 - 1000 (%)
 167         */
 168         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,
 169
 170         /* TODO: explain these values */
 171         WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
 172         WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
 173         WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
 174
 175         /*
 176         * Defines whether the SG will force WLAN host to enter/exit PSM
 177         *
 178         * Range: 1 - SG can force, 0 - host handles PSM
 179         */
 180         WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 181
 182         /*
 183         * Defines antenna configuration (single/dual antenna)
 184         *
 185         * Range: 0 - single antenna, 1 - dual antenna
 186         */
 187         WL12XX_CONF_SG_ANTENNA_CONFIGURATION,
 188
 189         /*
 190         * The threshold (percent) of max consecutive beacon misses before
 191         * increasing priority of beacon reception.
 192         *
 193         * Range: 0 - 100 (%)
 194         */
 195         WL12XX_CONF_SG_BEACON_MISS_PERCENT,
 196
 197         /*
 198         * Protection time of the DHCP procedure.
 199         *
 200         * Range: 0 - 100000 (ms)
 201         */
 202         WL12XX_CONF_SG_DHCP_TIME,
 203
 204         /*
 205         * RX guard time before the beginning of a new BT voice frame during
 206         * which no new WLAN trigger frame is transmitted.
 207         *
 208         * Range: 0 - 100000 (us)
 209         */
 210         WL12XX_CONF_SG_RXT,
 211
 212         /*
 213         * TX guard time before the beginning of a new BT voice frame during
 214         * which no new WLAN frame is transmitted.
 215         *
 216         * Range: 0 - 100000 (us)
 217         */
 218         WL12XX_CONF_SG_TXT,
 219
 220         /*
 221         * Enable adaptive RXT/TXT algorithm. If disabled, the host values
 222         * will be utilized.
 223         *
 224         * Range: 0 - disable, 1 - enable
 225         */
 226         WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,
 227
 228         /* TODO: explain this value */
 229         WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
 230
 231         /*
 232         * Number of consecutive BT voice frames not interrupted by WLAN
 233         *
 234         * Range: 0 - 100
 235         */
 236         WL12XX_CONF_SG_HV3_MAX_SERVED,
 237
 238         /*
 239         * The used WLAN legacy service period during active BT ACL link
 240         *
 241         * Range: 0 - 255 (ms)
 242         */
 243         WL12XX_CONF_SG_PS_POLL_TIMEOUT,
 244
 245         /*
 246         * The used WLAN UPSD service period during active BT ACL link
 247         *
 248         * Range: 0 - 255 (ms)
 249         */
 250         WL12XX_CONF_SG_UPSD_TIMEOUT,
 251
 252         WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
 253         WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
 254         WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
 255
 256         /* AP params */
 257         WL12XX_CONF_AP_BEACON_MISS_TX,
 258         WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
 259         WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
 260         WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
 261         WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
 262         WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
 263
 264         /* CTS Diluting params */
 265         WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
 266         WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
 267
 268         WL12XX_CONF_SG_TEMP_PARAM_1,
 269         WL12XX_CONF_SG_TEMP_PARAM_2,
 270         WL12XX_CONF_SG_TEMP_PARAM_3,
 271         WL12XX_CONF_SG_TEMP_PARAM_4,
 272         WL12XX_CONF_SG_TEMP_PARAM_5,
 273         WL12XX_CONF_SG_TEMP_PARAM_6,
 274         WL12XX_CONF_SG_TEMP_PARAM_7,
 275         WL12XX_CONF_SG_TEMP_PARAM_8,
 276         WL12XX_CONF_SG_TEMP_PARAM_9,
 277         WL12XX_CONF_SG_TEMP_PARAM_10,
 278
 279         WL12XX_CONF_SG_PARAMS_MAX,
 280         WL12XX_CONF_SG_PARAMS_ALL = 0xff
 281 };
 282
 283 #endif /* __WL12XX_CONF_H__ */