drivers/net/ixgbe/ixgbe_phy.c

   1 /*******************************************************************************
   2
   3   Intel 10 Gigabit PCI Express Linux driver
   4   Copyright(c) 1999 - 2007 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include <linux/pci.h>
  30 #include <linux/delay.h>
  31 #include <linux/sched.h>
  32
  33 #include "ixgbe_common.h"
  34 #include "ixgbe_phy.h"
  35
  36 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
  37 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
  38 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
  39 static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
  40                                u32 device_type, u16 phy_data);
  41
  42 /**
  43  *  ixgbe_identify_phy - Get physical layer module
  44  *  @hw: pointer to hardware structure
  45  *
  46  *  Determines the physical layer module found on the current adapter.
  47  **/
  48 s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
  49 {
  50         s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
  51         u32 phy_addr;
  52
  53         for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
  54                 if (ixgbe_validate_phy_addr(hw, phy_addr)) {
  55                         hw->phy.addr = phy_addr;
  56                         ixgbe_get_phy_id(hw);
  57                         hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
  58                         status = 0;
  59                         break;
  60                 }
  61         }
  62         return status;
  63 }
  64
  65 /**
  66  *  ixgbe_validate_phy_addr - Determines phy address is valid
  67  *  @hw: pointer to hardware structure
  68  *
  69  **/
  70 static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
  71 {
  72         u16 phy_id = 0;
  73         bool valid = false;
  74
  75         hw->phy.addr = phy_addr;
  76         ixgbe_read_phy_reg(hw,
  77                            IXGBE_MDIO_PHY_ID_HIGH,
  78                            IXGBE_MDIO_PMA_PMD_DEV_TYPE,
  79                            &phy_id);
  80
  81         if (phy_id != 0xFFFF && phy_id != 0x0)
  82                 valid = true;
  83
  84         return valid;
  85 }
  86
  87 /**
  88  *  ixgbe_get_phy_id - Get the phy type
  89  *  @hw: pointer to hardware structure
  90  *
  91  **/
  92 static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
  93 {
  94         u32 status;
  95         u16 phy_id_high = 0;
  96         u16 phy_id_low = 0;
  97
  98         status = ixgbe_read_phy_reg(hw,
  99                                    IXGBE_MDIO_PHY_ID_HIGH,
 100                                    IXGBE_MDIO_PMA_PMD_DEV_TYPE,
 101                                    &phy_id_high);
 102
 103         if (status == 0) {
 104                 hw->phy.id = (u32)(phy_id_high << 16);
 105                 status = ixgbe_read_phy_reg(hw,
 106                                            IXGBE_MDIO_PHY_ID_LOW,
 107                                            IXGBE_MDIO_PMA_PMD_DEV_TYPE,
 108                                            &phy_id_low);
 109                 hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
 110                 hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
 111         }
 112
 113         return status;
 114 }
 115
 116 /**
 117  *  ixgbe_get_phy_type_from_id - Get the phy type
 118  *  @hw: pointer to hardware structure
 119  *
 120  **/
 121 static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 122 {
 123         enum ixgbe_phy_type phy_type;
 124
 125         switch (phy_id) {
 126         case TN1010_PHY_ID:
 127                 phy_type = ixgbe_phy_tn;
 128                 break;
 129         case QT2022_PHY_ID:
 130                 phy_type = ixgbe_phy_qt;
 131                 break;
 132         default:
 133                 phy_type = ixgbe_phy_unknown;
 134                 break;
 135         }
 136
 137         return phy_type;
 138 }
 139
 140 /**
 141  *  ixgbe_reset_phy - Performs a PHY reset
 142  *  @hw: pointer to hardware structure
 143  **/
 144 s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
 145 {
 146         /*
 147          * Perform soft PHY reset to the PHY_XS.
 148          * This will cause a soft reset to the PHY
 149          */
 150         return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
 151                                    IXGBE_MDIO_PHY_XS_DEV_TYPE,
 152                                    IXGBE_MDIO_PHY_XS_RESET);
 153 }
 154
 155 /**
 156  *  ixgbe_read_phy_reg - Reads a value from a specified PHY register
 157  *  @hw: pointer to hardware structure
 158  *  @reg_addr: 32 bit address of PHY register to read
 159  *  @phy_data: Pointer to read data from PHY register
 160  **/
 161 s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
 162                        u32 device_type, u16 *phy_data)
 163 {
 164         u32 command;
 165         u32 i;
 166         u32 timeout = 10;
 167         u32 data;
 168         s32 status = 0;
 169         u16 gssr;
 170
 171         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 172                 gssr = IXGBE_GSSR_PHY1_SM;
 173         else
 174                 gssr = IXGBE_GSSR_PHY0_SM;
 175
 176         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 177                 status = IXGBE_ERR_SWFW_SYNC;
 178
 179         if (status == 0) {
 180                 /* Setup and write the address cycle command */
 181                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 182                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 183                            (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 184                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 185
 186                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 187
 188                 /*
 189                  * Check every 10 usec to see if the address cycle completed.
 190                  * The MDI Command bit will clear when the operation is
 191                  * complete
 192                  */
 193                 for (i = 0; i < timeout; i++) {
 194                         udelay(10);
 195
 196                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 197
 198                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 199                                 break;
 200                 }
 201
 202                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 203                         hw_dbg(hw, "PHY address command did not complete.\n");
 204                         status = IXGBE_ERR_PHY;
 205                 }
 206
 207                 if (status == 0) {
 208                         /*
 209                          * Address cycle complete, setup and write the read
 210                          * command
 211                          */
 212                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 213                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 214                                    (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 215                                    (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
 216
 217                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 218
 219                         /*
 220                          * Check every 10 usec to see if the address cycle
 221                          * completed. The MDI Command bit will clear when the
 222                          * operation is complete
 223                          */
 224                         for (i = 0; i < timeout; i++) {
 225                                 udelay(10);
 226
 227                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 228
 229                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
 230                                         break;
 231                         }
 232
 233                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
 234                                 hw_dbg(hw,
 235                                        "PHY read command didn't complete\n");
 236                                 status = IXGBE_ERR_PHY;
 237                         } else {
 238                                 /*
 239                                  * Read operation is complete.  Get the data
 240                                  * from MSRWD
 241                                  */
 242                                 data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
 243                                 data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
 244                                 *phy_data = (u16)(data);
 245                         }
 246                 }
 247
 248                 ixgbe_release_swfw_sync(hw, gssr);
 249         }
 250         return status;
 251 }
 252
 253 /**
 254  *  ixgbe_write_phy_reg - Writes a value to specified PHY register
 255  *  @hw: pointer to hardware structure
 256  *  @reg_addr: 32 bit PHY register to write
 257  *  @device_type: 5 bit device type
 258  *  @phy_data: Data to write to the PHY register
 259  **/
 260 static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
 261                                u32 device_type, u16 phy_data)
 262 {
 263         u32 command;
 264         u32 i;
 265         u32 timeout = 10;
 266         s32 status = 0;
 267         u16 gssr;
 268
 269         if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
 270                 gssr = IXGBE_GSSR_PHY1_SM;
 271         else
 272                 gssr = IXGBE_GSSR_PHY0_SM;
 273
 274         if (ixgbe_acquire_swfw_sync(hw, gssr) != 0)
 275                 status = IXGBE_ERR_SWFW_SYNC;
 276
 277         if (status == 0) {
 278                 /* Put the data in the MDI single read and write data register*/
 279                 IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
 280
 281                 /* Setup and write the address cycle command */
 282                 command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 283                            (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 284                            (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 285                            (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
 286
 287                 IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 288
 289                 /*
 290                  * Check every 10 usec to see if the address cycle completed.
 291                  * The MDI Command bit will clear when the operation is
 292                  * complete
 293                  */
 294                 for (i = 0; i < timeout; i++) {
 295                         udelay(10);
 296
 297                         command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 298
 299                         if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
 300                                 hw_dbg(hw, "PHY address cmd didn't complete\n");
 301                                 break;
 302                         }
 303                 }
 304
 305                 if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
 306                         status = IXGBE_ERR_PHY;
 307
 308                 if (status == 0) {
 309                         /*
 310                          * Address cycle complete, setup and write the write
 311                          * command
 312                          */
 313                         command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
 314                                    (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
 315                                    (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
 316                                    (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
 317
 318                         IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
 319
 320                         /*
 321                          * Check every 10 usec to see if the address cycle
 322                          * completed. The MDI Command bit will clear when the
 323                          * operation is complete
 324                          */
 325                         for (i = 0; i < timeout; i++) {
 326                                 udelay(10);
 327
 328                                 command = IXGBE_READ_REG(hw, IXGBE_MSCA);
 329
 330                                 if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
 331                                         hw_dbg(hw, "PHY write command did not "
 332                                                   "complete.\n");
 333                                         break;
 334                                 }
 335                         }
 336
 337                         if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
 338                                 status = IXGBE_ERR_PHY;
 339                 }
 340
 341                 ixgbe_release_swfw_sync(hw, gssr);
 342         }
 343
 344         return status;
 345 }
 346
 347 /**
 348  *  ixgbe_setup_tnx_phy_link - Set and restart autoneg
 349  *  @hw: pointer to hardware structure
 350  *
 351  *  Restart autonegotiation and PHY and waits for completion.
 352  **/
 353 s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
 354 {
 355         s32 status = IXGBE_NOT_IMPLEMENTED;
 356         u32 time_out;
 357         u32 max_time_out = 10;
 358         u16 autoneg_speed_selection_register = 0x10;
 359         u16 autoneg_restart_mask = 0x0200;
 360         u16 autoneg_complete_mask = 0x0020;
 361         u16 autoneg_reg = 0;
 362
 363         /*
 364          * Set advertisement settings in PHY based on autoneg_advertised
 365          * settings. If autoneg_advertised = 0, then advertise default values
 366          * txn devices cannot be "forced" to a autoneg 10G and fail.  But can
 367          * for a 1G.
 368          */
 369         ixgbe_read_phy_reg(hw,
 370                   autoneg_speed_selection_register,
 371                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 372                   &autoneg_reg);
 373
 374         if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
 375                 autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
 376         else
 377                 autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
 378
 379         ixgbe_write_phy_reg(hw,
 380                   autoneg_speed_selection_register,
 381                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 382                   autoneg_reg);
 383
 384
 385         /* Restart PHY autonegotiation and wait for completion */
 386         ixgbe_read_phy_reg(hw,
 387                   IXGBE_MDIO_AUTO_NEG_CONTROL,
 388                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 389                   &autoneg_reg);
 390
 391         autoneg_reg |= autoneg_restart_mask;
 392
 393         ixgbe_write_phy_reg(hw,
 394                   IXGBE_MDIO_AUTO_NEG_CONTROL,
 395                   IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 396                   autoneg_reg);
 397
 398         /* Wait for autonegotiation to finish */
 399         for (time_out = 0; time_out < max_time_out; time_out++) {
 400                 udelay(10);
 401                 /* Restart PHY autonegotiation and wait for completion */
 402                 status = ixgbe_read_phy_reg(hw,
 403                                             IXGBE_MDIO_AUTO_NEG_STATUS,
 404                                             IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 405                                             &autoneg_reg);
 406
 407                 autoneg_reg &= autoneg_complete_mask;
 408                 if (autoneg_reg == autoneg_complete_mask) {
 409                         status = 0;
 410                         break;
 411                 }
 412         }
 413
 414         if (time_out == max_time_out)
 415                 status = IXGBE_ERR_LINK_SETUP;
 416
 417         return status;
 418 }
 419
 420 /**
 421  *  ixgbe_check_tnx_phy_link - Determine link and speed status
 422  *  @hw: pointer to hardware structure
 423  *
 424  *  Reads the VS1 register to determine if link is up and the current speed for
 425  *  the PHY.
 426  **/
 427 s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
 428                              bool *link_up)
 429 {
 430         s32 status = 0;
 431         u32 time_out;
 432         u32 max_time_out = 10;
 433         u16 phy_link = 0;
 434         u16 phy_speed = 0;
 435         u16 phy_data = 0;
 436
 437         /* Initialize speed and link to default case */
 438         *link_up = false;
 439         *speed = IXGBE_LINK_SPEED_10GB_FULL;
 440
 441         /*
 442          * Check current speed and link status of the PHY register.
 443          * This is a vendor specific register and may have to
 444          * be changed for other copper PHYs.
 445          */
 446         for (time_out = 0; time_out < max_time_out; time_out++) {
 447                 udelay(10);
 448                 if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
 449                         *link_up = true;
 450                         if (phy_speed ==
 451                             IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
 452                                 *speed = IXGBE_LINK_SPEED_1GB_FULL;
 453                         break;
 454                 } else {
 455                         status = ixgbe_read_phy_reg(hw,
 456                                      IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
 457                                      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
 458                                      &phy_data);
 459                         phy_link = phy_data &
 460                                 IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
 461                         phy_speed = phy_data &
 462                                 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
 463                 }
 464         }
 465
 466         return status;
 467 }
 468
 469 /**
 470  *  ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
 471  *  @hw: pointer to hardware structure
 472  *  @speed: new link speed
 473  *  @autoneg: true if autonegotiation enabled
 474  **/
 475 s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
 476                                    bool autoneg,
 477                                    bool autoneg_wait_to_complete)
 478 {
 479         /*
 480          * Clear autoneg_advertised and set new values based on input link
 481          * speed.
 482          */
 483         hw->phy.autoneg_advertised = 0;
 484
 485         if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 486                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
 487         if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 488                 hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 489
 490         /* Setup link based on the new speed settings */
 491         ixgbe_setup_tnx_phy_link(hw);
 492
 493         return 0;
 494 }