drivers/net/ibm_newemac/phy.c

   1 /*
   2  * drivers/net/ibm_newemac/phy.c
   3  *
   4  * Driver for PowerPC 4xx on-chip ethernet controller, PHY support.
   5  * Borrowed from sungem_phy.c, though I only kept the generic MII
   6  * driver for now.
   7  *
   8  * This file should be shared with other drivers or eventually
   9  * merged as the "low level" part of miilib
  10  *
  11  * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
  12  *                <benh@kernel.crashing.org>
  13  *
  14  * Based on the arch/ppc version of the driver:
  15  *
  16  * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
  17  * (c) 2004-2005, Eugene Surovegin <ebs@ebshome.net>
  18  *
  19  */
  20 #include <linux/module.h>
  21 #include <linux/kernel.h>
  22 #include <linux/types.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/mii.h>
  25 #include <linux/ethtool.h>
  26 #include <linux/delay.h>
  27
  28 #include "emac.h"
  29 #include "phy.h"
  30
  31 static inline int phy_read(struct mii_phy *phy, int reg)
  32 {
  33         return phy->mdio_read(phy->dev, phy->address, reg);
  34 }
  35
  36 static inline void phy_write(struct mii_phy *phy, int reg, int val)
  37 {
  38         phy->mdio_write(phy->dev, phy->address, reg, val);
  39 }
  40
  41 int emac_mii_reset_phy(struct mii_phy *phy)
  42 {
  43         int val;
  44         int limit = 10000;
  45
  46         val = phy_read(phy, MII_BMCR);
  47         val &= ~(BMCR_ISOLATE | BMCR_ANENABLE);
  48         val |= BMCR_RESET;
  49         phy_write(phy, MII_BMCR, val);
  50
  51         udelay(300);
  52
  53         while (limit--) {
  54                 val = phy_read(phy, MII_BMCR);
  55                 if (val >= 0 && (val & BMCR_RESET) == 0)
  56                         break;
  57                 udelay(10);
  58         }
  59         if ((val & BMCR_ISOLATE) && limit > 0)
  60                 phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE);
  61
  62         return limit <= 0;
  63 }
  64
  65 static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
  66 {
  67         int ctl, adv;
  68
  69         phy->autoneg = AUTONEG_ENABLE;
  70         phy->speed = SPEED_10;
  71         phy->duplex = DUPLEX_HALF;
  72         phy->pause = phy->asym_pause = 0;
  73         phy->advertising = advertise;
  74
  75         ctl = phy_read(phy, MII_BMCR);
  76         if (ctl < 0)
  77                 return ctl;
  78         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
  79
  80         /* First clear the PHY */
  81         phy_write(phy, MII_BMCR, ctl);
  82
  83         /* Setup standard advertise */
  84         adv = phy_read(phy, MII_ADVERTISE);
  85         if (adv < 0)
  86                 return adv;
  87         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
  88                  ADVERTISE_PAUSE_ASYM);
  89         if (advertise & ADVERTISED_10baseT_Half)
  90                 adv |= ADVERTISE_10HALF;
  91         if (advertise & ADVERTISED_10baseT_Full)
  92                 adv |= ADVERTISE_10FULL;
  93         if (advertise & ADVERTISED_100baseT_Half)
  94                 adv |= ADVERTISE_100HALF;
  95         if (advertise & ADVERTISED_100baseT_Full)
  96                 adv |= ADVERTISE_100FULL;
  97         if (advertise & ADVERTISED_Pause)
  98                 adv |= ADVERTISE_PAUSE_CAP;
  99         if (advertise & ADVERTISED_Asym_Pause)
 100                 adv |= ADVERTISE_PAUSE_ASYM;
 101         phy_write(phy, MII_ADVERTISE, adv);
 102
 103         if (phy->features &
 104             (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 105                 adv = phy_read(phy, MII_CTRL1000);
 106                 if (adv < 0)
 107                         return adv;
 108                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 109                 if (advertise & ADVERTISED_1000baseT_Full)
 110                         adv |= ADVERTISE_1000FULL;
 111                 if (advertise & ADVERTISED_1000baseT_Half)
 112                         adv |= ADVERTISE_1000HALF;
 113                 phy_write(phy, MII_CTRL1000, adv);
 114         }
 115
 116         /* Start/Restart aneg */
 117         ctl = phy_read(phy, MII_BMCR);
 118         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 119         phy_write(phy, MII_BMCR, ctl);
 120
 121         return 0;
 122 }
 123
 124 static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
 125 {
 126         int ctl;
 127
 128         phy->autoneg = AUTONEG_DISABLE;
 129         phy->speed = speed;
 130         phy->duplex = fd;
 131         phy->pause = phy->asym_pause = 0;
 132
 133         ctl = phy_read(phy, MII_BMCR);
 134         if (ctl < 0)
 135                 return ctl;
 136         ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
 137
 138         /* First clear the PHY */
 139         phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
 140
 141         /* Select speed & duplex */
 142         switch (speed) {
 143         case SPEED_10:
 144                 break;
 145         case SPEED_100:
 146                 ctl |= BMCR_SPEED100;
 147                 break;
 148         case SPEED_1000:
 149                 ctl |= BMCR_SPEED1000;
 150                 break;
 151         default:
 152                 return -EINVAL;
 153         }
 154         if (fd == DUPLEX_FULL)
 155                 ctl |= BMCR_FULLDPLX;
 156         phy_write(phy, MII_BMCR, ctl);
 157
 158         return 0;
 159 }
 160
 161 static int genmii_poll_link(struct mii_phy *phy)
 162 {
 163         int status;
 164
 165         /* Clear latched value with dummy read */
 166         phy_read(phy, MII_BMSR);
 167         status = phy_read(phy, MII_BMSR);
 168         if (status < 0 || (status & BMSR_LSTATUS) == 0)
 169                 return 0;
 170         if (phy->autoneg == AUTONEG_ENABLE && !(status & BMSR_ANEGCOMPLETE))
 171                 return 0;
 172         return 1;
 173 }
 174
 175 static int genmii_read_link(struct mii_phy *phy)
 176 {
 177         if (phy->autoneg == AUTONEG_ENABLE) {
 178                 int glpa = 0;
 179                 int lpa = phy_read(phy, MII_LPA) & phy_read(phy, MII_ADVERTISE);
 180                 if (lpa < 0)
 181                         return lpa;
 182
 183                 if (phy->features &
 184                     (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half)) {
 185                         int adv = phy_read(phy, MII_CTRL1000);
 186                         glpa = phy_read(phy, MII_STAT1000);
 187
 188                         if (glpa < 0 || adv < 0)
 189                                 return adv;
 190
 191                         glpa &= adv << 2;
 192                 }
 193
 194                 phy->speed = SPEED_10;
 195                 phy->duplex = DUPLEX_HALF;
 196                 phy->pause = phy->asym_pause = 0;
 197
 198                 if (glpa & (LPA_1000FULL | LPA_1000HALF)) {
 199                         phy->speed = SPEED_1000;
 200                         if (glpa & LPA_1000FULL)
 201                                 phy->duplex = DUPLEX_FULL;
 202                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 203                         phy->speed = SPEED_100;
 204                         if (lpa & LPA_100FULL)
 205                                 phy->duplex = DUPLEX_FULL;
 206                 } else if (lpa & LPA_10FULL)
 207                         phy->duplex = DUPLEX_FULL;
 208
 209                 if (phy->duplex == DUPLEX_FULL) {
 210                         phy->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 211                         phy->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 212                 }
 213         } else {
 214                 int bmcr = phy_read(phy, MII_BMCR);
 215                 if (bmcr < 0)
 216                         return bmcr;
 217
 218                 if (bmcr & BMCR_FULLDPLX)
 219                         phy->duplex = DUPLEX_FULL;
 220                 else
 221                         phy->duplex = DUPLEX_HALF;
 222                 if (bmcr & BMCR_SPEED1000)
 223                         phy->speed = SPEED_1000;
 224                 else if (bmcr & BMCR_SPEED100)
 225                         phy->speed = SPEED_100;
 226                 else
 227                         phy->speed = SPEED_10;
 228
 229                 phy->pause = phy->asym_pause = 0;
 230         }
 231         return 0;
 232 }
 233
 234 /* Generic implementation for most 10/100/1000 PHYs */
 235 static struct mii_phy_ops generic_phy_ops = {
 236         .setup_aneg     = genmii_setup_aneg,
 237         .setup_forced   = genmii_setup_forced,
 238         .poll_link      = genmii_poll_link,
 239         .read_link      = genmii_read_link
 240 };
 241
 242 static struct mii_phy_def genmii_phy_def = {
 243         .phy_id         = 0x00000000,
 244         .phy_id_mask    = 0x00000000,
 245         .name           = "Generic MII",
 246         .ops            = &generic_phy_ops
 247 };
 248
 249 /* CIS8201 */
 250 #define MII_CIS8201_10BTCSR     0x16
 251 #define  TENBTCSR_ECHO_DISABLE  0x2000
 252 #define MII_CIS8201_EPCR        0x17
 253 #define  EPCR_MODE_MASK         0x3000
 254 #define  EPCR_GMII_MODE         0x0000
 255 #define  EPCR_RGMII_MODE        0x1000
 256 #define  EPCR_TBI_MODE          0x2000
 257 #define  EPCR_RTBI_MODE         0x3000
 258 #define MII_CIS8201_ACSR        0x1c
 259 #define  ACSR_PIN_PRIO_SELECT   0x0004
 260
 261 static int cis8201_init(struct mii_phy *phy)
 262 {
 263         int epcr;
 264
 265         epcr = phy_read(phy, MII_CIS8201_EPCR);
 266         if (epcr < 0)
 267                 return epcr;
 268
 269         epcr &= ~EPCR_MODE_MASK;
 270
 271         switch (phy->mode) {
 272         case PHY_MODE_TBI:
 273                 epcr |= EPCR_TBI_MODE;
 274                 break;
 275         case PHY_MODE_RTBI:
 276                 epcr |= EPCR_RTBI_MODE;
 277                 break;
 278         case PHY_MODE_GMII:
 279                 epcr |= EPCR_GMII_MODE;
 280                 break;
 281         case PHY_MODE_RGMII:
 282         default:
 283                 epcr |= EPCR_RGMII_MODE;
 284         }
 285
 286         phy_write(phy, MII_CIS8201_EPCR, epcr);
 287
 288         /* MII regs override strap pins */
 289         phy_write(phy, MII_CIS8201_ACSR,
 290                   phy_read(phy, MII_CIS8201_ACSR) | ACSR_PIN_PRIO_SELECT);
 291
 292         /* Disable TX_EN -> CRS echo mode, otherwise 10/HDX doesn't work */
 293         phy_write(phy, MII_CIS8201_10BTCSR,
 294                   phy_read(phy, MII_CIS8201_10BTCSR) | TENBTCSR_ECHO_DISABLE);
 295
 296         return 0;
 297 }
 298
 299 static struct mii_phy_ops cis8201_phy_ops = {
 300         .init           = cis8201_init,
 301         .setup_aneg     = genmii_setup_aneg,
 302         .setup_forced   = genmii_setup_forced,
 303         .poll_link      = genmii_poll_link,
 304         .read_link      = genmii_read_link
 305 };
 306
 307 static struct mii_phy_def cis8201_phy_def = {
 308         .phy_id         = 0x000fc410,
 309         .phy_id_mask    = 0x000ffff0,
 310         .name           = "CIS8201 Gigabit Ethernet",
 311         .ops            = &cis8201_phy_ops
 312 };
 313
 314 static struct mii_phy_def bcm5248_phy_def = {
 315
 316         .phy_id         = 0x0143bc00,
 317         .phy_id_mask    = 0x0ffffff0,
 318         .name           = "BCM5248 10/100 SMII Ethernet",
 319         .ops            = &generic_phy_ops
 320 };
 321
 322 static int m88e1111_init(struct mii_phy *phy)
 323 {
 324         pr_debug("%s: Marvell 88E1111 Ethernet\n", __FUNCTION__);
 325         phy_write(phy, 0x14, 0x0ce3);
 326         phy_write(phy, 0x18, 0x4101);
 327         phy_write(phy, 0x09, 0x0e00);
 328         phy_write(phy, 0x04, 0x01e1);
 329         phy_write(phy, 0x00, 0x9140);
 330         phy_write(phy, 0x00, 0x1140);
 331
 332         return  0;
 333 }
 334
 335 static int et1011c_init(struct mii_phy *phy)
 336 {
 337         u16 reg_short;
 338
 339         reg_short = (u16)(phy_read(phy, 0x16));
 340         reg_short &= ~(0x7);
 341         reg_short |= 0x6;       /* RGMII Trace Delay*/
 342         phy_write(phy, 0x16, reg_short);
 343
 344         reg_short = (u16)(phy_read(phy, 0x17));
 345         reg_short &= ~(0x40);
 346         phy_write(phy, 0x17, reg_short);
 347
 348         phy_write(phy, 0x1c, 0x74f0);
 349         return 0;
 350 }
 351
 352 static struct mii_phy_ops et1011c_phy_ops = {
 353         .init           = et1011c_init,
 354         .setup_aneg     = genmii_setup_aneg,
 355         .setup_forced   = genmii_setup_forced,
 356         .poll_link      = genmii_poll_link,
 357         .read_link      = genmii_read_link
 358 };
 359
 360 static struct mii_phy_def et1011c_phy_def = {
 361         .phy_id         = 0x0282f000,
 362         .phy_id_mask    = 0x0fffff00,
 363         .name           = "ET1011C Gigabit Ethernet",
 364         .ops            = &et1011c_phy_ops
 365 };
 366
 367
 368
 369
 370
 371 static struct mii_phy_ops m88e1111_phy_ops = {
 372         .init           = m88e1111_init,
 373         .setup_aneg     = genmii_setup_aneg,
 374         .setup_forced   = genmii_setup_forced,
 375         .poll_link      = genmii_poll_link,
 376         .read_link      = genmii_read_link
 377 };
 378
 379 static struct mii_phy_def m88e1111_phy_def = {
 380
 381         .phy_id         = 0x01410CC0,
 382         .phy_id_mask    = 0x0ffffff0,
 383         .name           = "Marvell 88E1111 Ethernet",
 384         .ops            = &m88e1111_phy_ops,
 385 };
 386
 387 static struct mii_phy_def *mii_phy_table[] = {
 388         &et1011c_phy_def,
 389         &cis8201_phy_def,
 390         &bcm5248_phy_def,
 391         &m88e1111_phy_def,
 392         &genmii_phy_def,
 393         NULL
 394 };
 395
 396 int emac_mii_phy_probe(struct mii_phy *phy, int address)
 397 {
 398         struct mii_phy_def *def;
 399         int i;
 400         u32 id;
 401
 402         phy->autoneg = AUTONEG_DISABLE;
 403         phy->advertising = 0;
 404         phy->address = address;
 405         phy->speed = SPEED_10;
 406         phy->duplex = DUPLEX_HALF;
 407         phy->pause = phy->asym_pause = 0;
 408
 409         /* Take PHY out of isolate mode and reset it. */
 410         if (emac_mii_reset_phy(phy))
 411                 return -ENODEV;
 412
 413         /* Read ID and find matching entry */
 414         id = (phy_read(phy, MII_PHYSID1) << 16) | phy_read(phy, MII_PHYSID2);
 415         for (i = 0; (def = mii_phy_table[i]) != NULL; i++)
 416                 if ((id & def->phy_id_mask) == def->phy_id)
 417                         break;
 418         /* Should never be NULL (we have a generic entry), but... */
 419         if (!def)
 420                 return -ENODEV;
 421
 422         phy->def = def;
 423
 424         /* Determine PHY features if needed */
 425         phy->features = def->features;
 426         if (!phy->features) {
 427                 u16 bmsr = phy_read(phy, MII_BMSR);
 428                 if (bmsr & BMSR_ANEGCAPABLE)
 429                         phy->features |= SUPPORTED_Autoneg;
 430                 if (bmsr & BMSR_10HALF)
 431                         phy->features |= SUPPORTED_10baseT_Half;
 432                 if (bmsr & BMSR_10FULL)
 433                         phy->features |= SUPPORTED_10baseT_Full;
 434                 if (bmsr & BMSR_100HALF)
 435                         phy->features |= SUPPORTED_100baseT_Half;
 436                 if (bmsr & BMSR_100FULL)
 437                         phy->features |= SUPPORTED_100baseT_Full;
 438                 if (bmsr & BMSR_ESTATEN) {
 439                         u16 esr = phy_read(phy, MII_ESTATUS);
 440                         if (esr & ESTATUS_1000_TFULL)
 441                                 phy->features |= SUPPORTED_1000baseT_Full;
 442                         if (esr & ESTATUS_1000_THALF)
 443                                 phy->features |= SUPPORTED_1000baseT_Half;
 444                 }
 445                 phy->features |= SUPPORTED_MII;
 446         }
 447
 448         /* Setup default advertising */
 449         phy->advertising = phy->features;
 450
 451         return 0;
 452 }
 453
 454 MODULE_LICENSE("GPL");