2 * Driver for the Conexant CX23885 PCIe bridge
4 * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #include <linux/init.h>
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <linux/delay.h>
26 #include <media/cx25840.h>
30 /* ------------------------------------------------------------------ */
31 /* board config info */
33 struct cx23885_board cx23885_boards[] = {
34 [CX23885_BOARD_UNKNOWN] = {
35 .name = "UNKNOWN/GENERIC",
36 /* Ensure safe default for unknown boards */
39 .type = CX23885_VMUX_COMPOSITE1,
42 .type = CX23885_VMUX_COMPOSITE2,
45 .type = CX23885_VMUX_COMPOSITE3,
48 .type = CX23885_VMUX_COMPOSITE4,
52 [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
53 .name = "Hauppauge WinTV-HVR1800lp",
54 .portc = CX23885_MPEG_DVB,
56 .type = CX23885_VMUX_TELEVISION,
60 .type = CX23885_VMUX_DEBUG,
64 .type = CX23885_VMUX_COMPOSITE1,
68 .type = CX23885_VMUX_SVIDEO,
73 [CX23885_BOARD_HAUPPAUGE_HVR1800] = {
74 .name = "Hauppauge WinTV-HVR1800",
75 .porta = CX23885_ANALOG_VIDEO,
76 .portb = CX23885_MPEG_ENCODER,
77 .portc = CX23885_MPEG_DVB,
78 .tuner_type = TUNER_PHILIPS_TDA8290,
79 .tuner_addr = 0x42, /* 0x84 >> 1 */
81 .type = CX23885_VMUX_TELEVISION,
82 .vmux = CX25840_VIN7_CH3 |
87 .type = CX23885_VMUX_COMPOSITE1,
88 .vmux = CX25840_VIN7_CH3 |
93 .type = CX23885_VMUX_SVIDEO,
94 .vmux = CX25840_VIN7_CH3 |
101 [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
102 .name = "Hauppauge WinTV-HVR1250",
103 .portc = CX23885_MPEG_DVB,
105 .type = CX23885_VMUX_TELEVISION,
109 .type = CX23885_VMUX_DEBUG,
113 .type = CX23885_VMUX_COMPOSITE1,
117 .type = CX23885_VMUX_SVIDEO,
122 [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
123 .name = "DViCO FusionHDTV5 Express",
124 .portb = CX23885_MPEG_DVB,
126 [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
127 .name = "Hauppauge WinTV-HVR1500Q",
128 .portc = CX23885_MPEG_DVB,
130 [CX23885_BOARD_HAUPPAUGE_HVR1500] = {
131 .name = "Hauppauge WinTV-HVR1500",
132 .portc = CX23885_MPEG_DVB,
134 [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
135 .name = "Hauppauge WinTV-HVR1200",
136 .portc = CX23885_MPEG_DVB,
138 [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
139 .name = "Hauppauge WinTV-HVR1700",
140 .portc = CX23885_MPEG_DVB,
142 [CX23885_BOARD_HAUPPAUGE_HVR1400] = {
143 .name = "Hauppauge WinTV-HVR1400",
144 .portc = CX23885_MPEG_DVB,
147 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
149 /* ------------------------------------------------------------------ */
150 /* PCI subsystem IDs */
152 struct cx23885_subid cx23885_subids[] = {
156 .card = CX23885_BOARD_UNKNOWN,
160 .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
164 .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
168 .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
172 .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
176 .card = CX23885_BOARD_HAUPPAUGE_HVR1250,
180 .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
184 .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
188 .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
192 .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
196 .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
200 .card = CX23885_BOARD_HAUPPAUGE_HVR1200,
204 .card = CX23885_BOARD_HAUPPAUGE_HVR1700,
208 .card = CX23885_BOARD_HAUPPAUGE_HVR1400,
211 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
213 void cx23885_card_list(struct cx23885_dev *dev)
217 if (0 == dev->pci->subsystem_vendor &&
218 0 == dev->pci->subsystem_device) {
219 printk("%s: Your board has no valid PCIe Subsystem ID and thus can't\n"
220 "%s: be autodetected. Please pass card=<n> insmod option to\n"
221 "%s: workaround that. Redirect complaints to the vendor of\n"
222 "%s: the TV card. Best regards,\n"
224 dev->name, dev->name, dev->name, dev->name, dev->name);
226 printk("%s: Your board isn't known (yet) to the driver. You can\n"
227 "%s: try to pick one of the existing card configs via\n"
228 "%s: card=<n> insmod option. Updating to the latest\n"
229 "%s: version might help as well.\n",
230 dev->name, dev->name, dev->name, dev->name);
232 printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
234 for (i = 0; i < cx23885_bcount; i++)
235 printk("%s: card=%d -> %s\n",
236 dev->name, i, cx23885_boards[i].name);
239 static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
243 tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
245 /* Make sure we support the board model */
248 case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
249 case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
250 case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
251 case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
252 case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
253 case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
254 case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
255 case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
256 case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
257 case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
258 case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
259 case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
260 case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
261 case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
262 case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
264 /* WinTV-HVR1400 (Express Card, Retail, IR,
265 * DVB-T and Basic analog */
267 /* WinTV-HVR1700 (PCIe, Retail, No IR, half height,
268 * DVB-T and MPEG2 HW Encoder */
271 printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
275 printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
276 dev->name, tv.model);
279 /* Tuner callback function for cx23885 boards. Currently only needed
280 * for HVR1500Q, which has an xc5000 tuner.
282 int cx23885_tuner_callback(void *priv, int command, int arg)
284 struct cx23885_i2c *bus = priv;
285 struct cx23885_dev *dev = bus->dev;
288 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
289 if(command == 0) { /* Tuner Reset Command from xc5000 */
290 /* Drive the tuner into reset and out */
291 cx_clear(GP0_IO, 0x00000004);
293 cx_set(GP0_IO, 0x00000004);
298 "%s(): Unknow command.\n", __func__);
304 return 0; /* Should never be here */
307 void cx23885_gpio_setup(struct cx23885_dev *dev)
310 case CX23885_BOARD_HAUPPAUGE_HVR1250:
311 /* GPIO-0 cx24227 demodulator reset */
312 cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
314 case CX23885_BOARD_HAUPPAUGE_HVR1500:
315 /* GPIO-0 cx24227 demodulator */
316 /* GPIO-2 xc3028 tuner */
318 /* Put the parts into reset */
319 cx_set(GP0_IO, 0x00050000);
320 cx_clear(GP0_IO, 0x00000005);
323 /* Bring the parts out of reset */
324 cx_set(GP0_IO, 0x00050005);
326 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
327 /* GPIO-0 cx24227 demodulator reset */
328 /* GPIO-2 xc5000 tuner reset */
329 cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
331 case CX23885_BOARD_HAUPPAUGE_HVR1800:
334 /* GPIO-2 8295A Reset */
335 /* GPIO-3-10 cx23417 data0-7 */
336 /* GPIO-11-14 cx23417 addr0-3 */
337 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
341 /* EIO15 Zilog Reset */
342 /* EIO14 S5H1409/CX24227 Reset */
344 /* Force the TDA8295A into reset and back */
345 cx_set(GP0_IO, 0x00040004);
347 cx_clear(GP0_IO, 0x00000004);
349 cx_set(GP0_IO, 0x00040004);
352 case CX23885_BOARD_HAUPPAUGE_HVR1200:
353 /* GPIO-0 tda10048 demodulator reset */
354 /* GPIO-2 tda18271 tuner reset */
356 /* Put the parts into reset and back */
357 cx_set(GP0_IO, 0x00050000);
359 cx_clear(GP0_IO, 0x00000005);
361 cx_set(GP0_IO, 0x00050005);
363 case CX23885_BOARD_HAUPPAUGE_HVR1700:
364 /* GPIO-0 TDA10048 demodulator reset */
365 /* GPIO-2 TDA8295A Reset */
366 /* GPIO-3-10 cx23417 data0-7 */
367 /* GPIO-11-14 cx23417 addr0-3 */
368 /* GPIO-15-18 cx23417 READY, CS, RD, WR */
370 /* The following GPIO's are on the interna AVCore (cx25840) */
372 /* GPIO-20 IR_TX 416/DVBT Select */
373 /* GPIO-21 IIS DAT */
374 /* GPIO-22 IIS WCLK */
375 /* GPIO-23 IIS BCLK */
377 /* Put the parts into reset and back */
378 cx_set(GP0_IO, 0x00050000);
380 cx_clear(GP0_IO, 0x00000005);
382 cx_set(GP0_IO, 0x00050005);
384 case CX23885_BOARD_HAUPPAUGE_HVR1400:
385 /* GPIO-0 Dibcom7000p demodulator reset */
386 /* GPIO-2 xc3028L tuner reset */
389 /* Put the parts into reset and back */
390 cx_set(GP0_IO, 0x00050000);
392 cx_clear(GP0_IO, 0x00000005);
394 cx_set(GP0_IO, 0x00050005);
399 int cx23885_ir_init(struct cx23885_dev *dev)
401 switch (dev->board) {
402 case CX23885_BOARD_HAUPPAUGE_HVR1250:
403 case CX23885_BOARD_HAUPPAUGE_HVR1500:
404 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
405 case CX23885_BOARD_HAUPPAUGE_HVR1800:
406 case CX23885_BOARD_HAUPPAUGE_HVR1200:
407 case CX23885_BOARD_HAUPPAUGE_HVR1400:
408 /* FIXME: Implement me */
415 void cx23885_card_setup(struct cx23885_dev *dev)
417 struct cx23885_tsport *ts1 = &dev->ts1;
418 struct cx23885_tsport *ts2 = &dev->ts2;
420 static u8 eeprom[256];
422 if (dev->i2c_bus[0].i2c_rc == 0) {
423 dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
424 tveeprom_read(&dev->i2c_bus[0].i2c_client,
425 eeprom, sizeof(eeprom));
428 switch (dev->board) {
429 case CX23885_BOARD_HAUPPAUGE_HVR1250:
430 case CX23885_BOARD_HAUPPAUGE_HVR1500:
431 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
432 case CX23885_BOARD_HAUPPAUGE_HVR1400:
433 if (dev->i2c_bus[0].i2c_rc == 0)
434 hauppauge_eeprom(dev, eeprom+0x80);
436 case CX23885_BOARD_HAUPPAUGE_HVR1800:
437 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
438 case CX23885_BOARD_HAUPPAUGE_HVR1200:
439 case CX23885_BOARD_HAUPPAUGE_HVR1700:
440 if (dev->i2c_bus[0].i2c_rc == 0)
441 hauppauge_eeprom(dev, eeprom+0xc0);
445 switch (dev->board) {
446 case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
447 ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
448 ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
449 ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
451 case CX23885_BOARD_HAUPPAUGE_HVR1800:
452 /* Defaults for VID B - Analog encoder */
453 /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
454 ts1->gen_ctrl_val = 0x10e;
455 ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
456 ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
458 /* APB_TSVALERR_POL (active low)*/
459 ts1->vld_misc_val = 0x2000;
460 ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
462 /* Defaults for VID C */
463 ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
464 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
465 ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
467 case CX23885_BOARD_HAUPPAUGE_HVR1250:
468 case CX23885_BOARD_HAUPPAUGE_HVR1500:
469 case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
470 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
471 case CX23885_BOARD_HAUPPAUGE_HVR1200:
472 case CX23885_BOARD_HAUPPAUGE_HVR1700:
473 case CX23885_BOARD_HAUPPAUGE_HVR1400:
475 ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
476 ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
477 ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
480 /* Certain boards support analog, or require the avcore to be
481 * loaded, ensure this happens.
483 switch (dev->board) {
484 case CX23885_BOARD_HAUPPAUGE_HVR1800:
485 case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
486 case CX23885_BOARD_HAUPPAUGE_HVR1700:
487 request_module("cx25840");
492 /* ------------------------------------------------------------------ */
498 * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off