treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
[sfrench/cifs-2.6.git] / drivers / media / i2c / smiapp / smiapp-quirk.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/media/i2c/smiapp/smiapp-quirk.c
4  *
5  * Generic driver for SMIA/SMIA++ compliant camera modules
6  *
7  * Copyright (C) 2011--2012 Nokia Corporation
8  * Contact: Sakari Ailus <sakari.ailus@iki.fi>
9  */
10
11 #include <linux/delay.h>
12
13 #include "smiapp.h"
14
15 static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
16 {
17         return smiapp_write(sensor, SMIAPP_REG_MK_U8(reg), val);
18 }
19
20 static int smiapp_write_8s(struct smiapp_sensor *sensor,
21                            const struct smiapp_reg_8 *regs, int len)
22 {
23         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
24         int rval;
25
26         for (; len > 0; len--, regs++) {
27                 rval = smiapp_write_8(sensor, regs->reg, regs->val);
28                 if (rval < 0) {
29                         dev_err(&client->dev,
30                                 "error %d writing reg 0x%4.4x, val 0x%2.2x",
31                                 rval, regs->reg, regs->val);
32                         return rval;
33                 }
34         }
35
36         return 0;
37 }
38
39 void smiapp_replace_limit(struct smiapp_sensor *sensor,
40                           u32 limit, u32 val)
41 {
42         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
43
44         dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
45                 smiapp_reg_limits[limit].addr,
46                 smiapp_reg_limits[limit].what, val, val);
47         sensor->limits[limit] = val;
48 }
49
50 static int jt8ew9_limits(struct smiapp_sensor *sensor)
51 {
52         if (sensor->minfo.revision_number_major < 0x03)
53                 sensor->frame_skip = 1;
54
55         /* Below 24 gain doesn't have effect at all, */
56         /* but ~59 is needed for full dynamic range */
57         smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
58         smiapp_replace_limit(
59                 sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
60
61         return 0;
62 }
63
64 static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
65 {
66         static const struct smiapp_reg_8 regs[] = {
67                 { 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
68                 { 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
69                 { 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
70                 { 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
71                 { 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
72                 { 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
73                 { 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
74                 { 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
75                 { 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
76                 { 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
77                 { 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
78                 { 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
79                 { 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
80                 { 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
81                 { 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
82                 { 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
83                 { 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
84                 { 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
85                 { 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
86                 { 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
87                 { 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
88                 { 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
89                 { 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
90                 /* Taken from v03. No idea what the rest are. */
91                 { 0x32e0, 0x05 },
92                 { 0x32e1, 0x05 },
93                 { 0x32e2, 0x04 },
94                 { 0x32e5, 0x04 },
95                 { 0x32e6, 0x04 },
96
97         };
98
99         return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
100 }
101
102 const struct smiapp_quirk smiapp_jt8ew9_quirk = {
103         .limits = jt8ew9_limits,
104         .post_poweron = jt8ew9_post_poweron,
105 };
106
107 static int imx125es_post_poweron(struct smiapp_sensor *sensor)
108 {
109         /* Taken from v02. No idea what the other two are. */
110         static const struct smiapp_reg_8 regs[] = {
111                 /*
112                  * 0x3302: clk during frame blanking:
113                  * 0x00 - HS mode, 0x01 - LP11
114                  */
115                 { 0x3302, 0x01 },
116                 { 0x302d, 0x00 },
117                 { 0x3b08, 0x8c },
118         };
119
120         return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
121 }
122
123 const struct smiapp_quirk smiapp_imx125es_quirk = {
124         .post_poweron = imx125es_post_poweron,
125 };
126
127 static int jt8ev1_limits(struct smiapp_sensor *sensor)
128 {
129         smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
130         smiapp_replace_limit(sensor,
131                              SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
132
133         return 0;
134 }
135
136 static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
137 {
138         struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
139         int rval;
140         static const struct smiapp_reg_8 regs[] = {
141                 { 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
142                 { 0x30a3, 0xd0 }, /* FLASH STROBE enable */
143                 { 0x3237, 0x00 }, /* For control of pulse timing for ADC */
144                 { 0x3238, 0x43 },
145                 { 0x3301, 0x06 }, /* For analog bias for sensor */
146                 { 0x3302, 0x06 },
147                 { 0x3304, 0x00 },
148                 { 0x3305, 0x88 },
149                 { 0x332a, 0x14 },
150                 { 0x332c, 0x6b },
151                 { 0x3336, 0x01 },
152                 { 0x333f, 0x1f },
153                 { 0x3355, 0x00 },
154                 { 0x3356, 0x20 },
155                 { 0x33bf, 0x20 }, /* Adjust the FBC speed */
156                 { 0x33c9, 0x20 },
157                 { 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
158                 { 0x33cf, 0xec }, /* For Black sun */
159                 { 0x3328, 0x80 }, /* Ugh. No idea what's this. */
160         };
161         static const struct smiapp_reg_8 regs_96[] = {
162                 { 0x30ae, 0x00 }, /* For control of ADC clock */
163                 { 0x30af, 0xd0 },
164                 { 0x30b0, 0x01 },
165         };
166
167         rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
168         if (rval < 0)
169                 return rval;
170
171         switch (sensor->hwcfg->ext_clk) {
172         case 9600000:
173                 return smiapp_write_8s(sensor, regs_96,
174                                        ARRAY_SIZE(regs_96));
175         default:
176                 dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
177                          sensor->hwcfg->ext_clk);
178                 return 0;
179         }
180 }
181
182 static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
183 {
184         return smiapp_write_8(sensor, 0x3328, 0x00);
185 }
186
187 static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
188 {
189         int rval;
190
191         /* Workaround: allows fast standby to work properly */
192         rval = smiapp_write_8(sensor, 0x3205, 0x04);
193         if (rval < 0)
194                 return rval;
195
196         /* Wait for 1 ms + one line => 2 ms is likely enough */
197         usleep_range(2000, 2000);
198
199         /* Restore it */
200         rval = smiapp_write_8(sensor, 0x3205, 0x00);
201         if (rval < 0)
202                 return rval;
203
204         return smiapp_write_8(sensor, 0x3328, 0x80);
205 }
206
207 static int jt8ev1_init(struct smiapp_sensor *sensor)
208 {
209         sensor->pll.flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
210
211         return 0;
212 }
213
214 const struct smiapp_quirk smiapp_jt8ev1_quirk = {
215         .limits = jt8ev1_limits,
216         .post_poweron = jt8ev1_post_poweron,
217         .pre_streamon = jt8ev1_pre_streamon,
218         .post_streamoff = jt8ev1_post_streamoff,
219         .init = jt8ev1_init,
220 };
221
222 static int tcm8500md_limits(struct smiapp_sensor *sensor)
223 {
224         smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
225
226         return 0;
227 }
228
229 const struct smiapp_quirk smiapp_tcm8500md_quirk = {
230         .limits = tcm8500md_limits,
231 };