spnego: add missing OID to oid registry
[sfrench/cifs-2.6.git] / drivers / media / dvb-frontends / ves1x93.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3     Driver for VES1893 and VES1993 QPSK Demodulators
4
5     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
6     Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
7     Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
8     Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
9
10
11 */
12
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/init.h>
16 #include <linux/string.h>
17 #include <linux/slab.h>
18 #include <linux/delay.h>
19
20 #include <media/dvb_frontend.h>
21 #include "ves1x93.h"
22
23
24 struct ves1x93_state {
25         struct i2c_adapter* i2c;
26         /* configuration settings */
27         const struct ves1x93_config* config;
28         struct dvb_frontend frontend;
29
30         /* previous uncorrected block counter */
31         enum fe_spectral_inversion inversion;
32         u8 *init_1x93_tab;
33         u8 *init_1x93_wtab;
34         u8 tab_size;
35         u8 demod_type;
36         u32 frequency;
37 };
38
39 static int debug;
40 #define dprintk if (debug) printk
41
42 #define DEMOD_VES1893           0
43 #define DEMOD_VES1993           1
44
45 static u8 init_1893_tab [] = {
46         0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
47         0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
48         0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
49         0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
50         0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
51         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
52         0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
53 };
54
55 static u8 init_1993_tab [] = {
56         0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
57         0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
58         0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
59         0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
60         0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
61         0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
62         0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
63         0x00, 0x00, 0x0e, 0x80, 0x00
64 };
65
66 static u8 init_1893_wtab[] =
67 {
68         1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
69         0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
70         1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
71         1,1,1,0,1,1
72 };
73
74 static u8 init_1993_wtab[] =
75 {
76         1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
77         0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
78         1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
79         1,1,1,0,1,1,1,1, 1,1,1,1,1
80 };
81
82 static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
83 {
84         u8 buf [] = { 0x00, reg, data };
85         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
86         int err;
87
88         if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
89                 dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
90                 return -EREMOTEIO;
91         }
92
93         return 0;
94 }
95
96 static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
97 {
98         int ret;
99         u8 b0 [] = { 0x00, reg };
100         u8 b1 [] = { 0 };
101         struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
102                            { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
103
104         ret = i2c_transfer (state->i2c, msg, 2);
105
106         if (ret != 2) return ret;
107
108         return b1[0];
109 }
110
111 static int ves1x93_clr_bit (struct ves1x93_state* state)
112 {
113         msleep(10);
114         ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
115         ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
116         msleep(50);
117         return 0;
118 }
119
120 static int ves1x93_set_inversion(struct ves1x93_state *state,
121                                  enum fe_spectral_inversion inversion)
122 {
123         u8 val;
124
125         /*
126          * inversion on/off are interchanged because i and q seem to
127          * be swapped on the hardware
128          */
129
130         switch (inversion) {
131         case INVERSION_OFF:
132                 val = 0xc0;
133                 break;
134         case INVERSION_ON:
135                 val = 0x80;
136                 break;
137         case INVERSION_AUTO:
138                 val = 0x00;
139                 break;
140         default:
141                 return -EINVAL;
142         }
143
144         return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
145 }
146
147 static int ves1x93_set_fec(struct ves1x93_state *state, enum fe_code_rate fec)
148 {
149         if (fec == FEC_AUTO)
150                 return ves1x93_writereg (state, 0x0d, 0x08);
151         else if (fec < FEC_1_2 || fec > FEC_8_9)
152                 return -EINVAL;
153         else
154                 return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
155 }
156
157 static enum fe_code_rate ves1x93_get_fec(struct ves1x93_state *state)
158 {
159         return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
160 }
161
162 static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
163 {
164         u32 BDR;
165         u32 ratio;
166         u8  ADCONF, FCONF, FNR, AGCR;
167         u32 BDRI;
168         u32 tmp;
169         u32 FIN;
170
171         dprintk("%s: srate == %d\n", __func__, (unsigned int) srate);
172
173         if (srate > state->config->xin/2)
174                 srate = state->config->xin/2;
175
176         if (srate < 500000)
177                 srate = 500000;
178
179 #define MUL (1UL<<26)
180
181         FIN = (state->config->xin + 6000) >> 4;
182
183         tmp = srate << 6;
184         ratio = tmp / FIN;
185
186         tmp = (tmp % FIN) << 8;
187         ratio = (ratio << 8) + tmp / FIN;
188
189         tmp = (tmp % FIN) << 8;
190         ratio = (ratio << 8) + tmp / FIN;
191
192         FNR = 0xff;
193
194         if (ratio < MUL/3)           FNR = 0;
195         if (ratio < (MUL*11)/50)     FNR = 1;
196         if (ratio < MUL/6)           FNR = 2;
197         if (ratio < MUL/9)           FNR = 3;
198         if (ratio < MUL/12)          FNR = 4;
199         if (ratio < (MUL*11)/200)    FNR = 5;
200         if (ratio < MUL/24)          FNR = 6;
201         if (ratio < (MUL*27)/1000)   FNR = 7;
202         if (ratio < MUL/48)          FNR = 8;
203         if (ratio < (MUL*137)/10000) FNR = 9;
204
205         if (FNR == 0xff) {
206                 ADCONF = 0x89;
207                 FCONF  = 0x80;
208                 FNR     = 0;
209         } else {
210                 ADCONF = 0x81;
211                 FCONF  = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
212                 /*FCONF  = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
213         }
214
215         BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
216         BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
217
218         dprintk("FNR= %d\n", FNR);
219         dprintk("ratio= %08x\n", (unsigned int) ratio);
220         dprintk("BDR= %08x\n", (unsigned int) BDR);
221         dprintk("BDRI= %02x\n", (unsigned int) BDRI);
222
223         if (BDRI > 0xff)
224                 BDRI = 0xff;
225
226         ves1x93_writereg (state, 0x06, 0xff & BDR);
227         ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
228         ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
229
230         ves1x93_writereg (state, 0x09, BDRI);
231         ves1x93_writereg (state, 0x20, ADCONF);
232         ves1x93_writereg (state, 0x21, FCONF);
233
234         AGCR = state->init_1x93_tab[0x05];
235         if (state->config->invert_pwm)
236                 AGCR |= 0x20;
237
238         if (srate < 6000000)
239                 AGCR |= 0x80;
240         else
241                 AGCR &= ~0x80;
242
243         ves1x93_writereg (state, 0x05, AGCR);
244
245         /* ves1993 hates this, will lose lock */
246         if (state->demod_type != DEMOD_VES1993)
247                 ves1x93_clr_bit (state);
248
249         return 0;
250 }
251
252 static int ves1x93_init (struct dvb_frontend* fe)
253 {
254         struct ves1x93_state* state = fe->demodulator_priv;
255         int i;
256         int val;
257
258         dprintk("%s: init chip\n", __func__);
259
260         for (i = 0; i < state->tab_size; i++) {
261                 if (state->init_1x93_wtab[i]) {
262                         val = state->init_1x93_tab[i];
263
264                         if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
265                         ves1x93_writereg (state, i, val);
266                 }
267         }
268
269         return 0;
270 }
271
272 static int ves1x93_set_voltage(struct dvb_frontend *fe,
273                                enum fe_sec_voltage voltage)
274 {
275         struct ves1x93_state* state = fe->demodulator_priv;
276
277         switch (voltage) {
278         case SEC_VOLTAGE_13:
279                 return ves1x93_writereg (state, 0x1f, 0x20);
280         case SEC_VOLTAGE_18:
281                 return ves1x93_writereg (state, 0x1f, 0x30);
282         case SEC_VOLTAGE_OFF:
283                 return ves1x93_writereg (state, 0x1f, 0x00);
284         default:
285                 return -EINVAL;
286         }
287 }
288
289 static int ves1x93_read_status(struct dvb_frontend *fe,
290                                enum fe_status *status)
291 {
292         struct ves1x93_state* state = fe->demodulator_priv;
293
294         u8 sync = ves1x93_readreg (state, 0x0e);
295
296         /*
297          * The ves1893 sometimes returns sync values that make no sense,
298          * because, e.g., the SIGNAL bit is 0, while some of the higher
299          * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
300          * Tests showed that the VITERBI and SYNC bits are returned
301          * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
302          * If such a case occurs, we read the value again, until we get a
303          * valid value.
304          */
305         int maxtry = 10; /* just for safety - let's not get stuck here */
306         while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
307                 msleep(10);
308                 sync = ves1x93_readreg (state, 0x0e);
309         }
310
311         *status = 0;
312
313         if (sync & 1)
314                 *status |= FE_HAS_SIGNAL;
315
316         if (sync & 2)
317                 *status |= FE_HAS_CARRIER;
318
319         if (sync & 4)
320                 *status |= FE_HAS_VITERBI;
321
322         if (sync & 8)
323                 *status |= FE_HAS_SYNC;
324
325         if ((sync & 0x1f) == 0x1f)
326                 *status |= FE_HAS_LOCK;
327
328         return 0;
329 }
330
331 static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
332 {
333         struct ves1x93_state* state = fe->demodulator_priv;
334
335         *ber = ves1x93_readreg (state, 0x15);
336         *ber |= (ves1x93_readreg (state, 0x16) << 8);
337         *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
338         *ber *= 10;
339
340         return 0;
341 }
342
343 static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
344 {
345         struct ves1x93_state* state = fe->demodulator_priv;
346
347         u8 signal = ~ves1x93_readreg (state, 0x0b);
348         *strength = (signal << 8) | signal;
349
350         return 0;
351 }
352
353 static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
354 {
355         struct ves1x93_state* state = fe->demodulator_priv;
356
357         u8 _snr = ~ves1x93_readreg (state, 0x1c);
358         *snr = (_snr << 8) | _snr;
359
360         return 0;
361 }
362
363 static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
364 {
365         struct ves1x93_state* state = fe->demodulator_priv;
366
367         *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
368
369         if (*ucblocks == 0x7f)
370                 *ucblocks = 0xffffffff;   /* counter overflow... */
371
372         ves1x93_writereg (state, 0x18, 0x00);  /* reset the counter */
373         ves1x93_writereg (state, 0x18, 0x80);  /* dto. */
374
375         return 0;
376 }
377
378 static int ves1x93_set_frontend(struct dvb_frontend *fe)
379 {
380         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
381         struct ves1x93_state* state = fe->demodulator_priv;
382
383         if (fe->ops.tuner_ops.set_params) {
384                 fe->ops.tuner_ops.set_params(fe);
385                 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
386         }
387         ves1x93_set_inversion (state, p->inversion);
388         ves1x93_set_fec(state, p->fec_inner);
389         ves1x93_set_symbolrate(state, p->symbol_rate);
390         state->inversion = p->inversion;
391         state->frequency = p->frequency;
392
393         return 0;
394 }
395
396 static int ves1x93_get_frontend(struct dvb_frontend *fe,
397                                 struct dtv_frontend_properties *p)
398 {
399         struct ves1x93_state* state = fe->demodulator_priv;
400         int afc;
401
402         afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
403         afc = (afc * (int)(p->symbol_rate/1000/8))/16;
404
405         p->frequency = state->frequency - afc;
406
407         /*
408          * inversion indicator is only valid
409          * if auto inversion was used
410          */
411         if (state->inversion == INVERSION_AUTO)
412                 p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
413                                 INVERSION_OFF : INVERSION_ON;
414         p->fec_inner = ves1x93_get_fec(state);
415         /*  XXX FIXME: timing offset !! */
416
417         return 0;
418 }
419
420 static int ves1x93_sleep(struct dvb_frontend* fe)
421 {
422         struct ves1x93_state* state = fe->demodulator_priv;
423
424         return ves1x93_writereg (state, 0x00, 0x08);
425 }
426
427 static void ves1x93_release(struct dvb_frontend* fe)
428 {
429         struct ves1x93_state* state = fe->demodulator_priv;
430         kfree(state);
431 }
432
433 static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
434 {
435         struct ves1x93_state* state = fe->demodulator_priv;
436
437         if (enable) {
438                 return ves1x93_writereg(state, 0x00, 0x11);
439         } else {
440                 return ves1x93_writereg(state, 0x00, 0x01);
441         }
442 }
443
444 static const struct dvb_frontend_ops ves1x93_ops;
445
446 struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
447                                     struct i2c_adapter* i2c)
448 {
449         struct ves1x93_state* state = NULL;
450         u8 identity;
451
452         /* allocate memory for the internal state */
453         state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
454         if (state == NULL) goto error;
455
456         /* setup the state */
457         state->config = config;
458         state->i2c = i2c;
459         state->inversion = INVERSION_OFF;
460
461         /* check if the demod is there + identify it */
462         identity = ves1x93_readreg(state, 0x1e);
463         switch (identity) {
464         case 0xdc: /* VES1893A rev1 */
465                 printk("ves1x93: Detected ves1893a rev1\n");
466                 state->demod_type = DEMOD_VES1893;
467                 state->init_1x93_tab = init_1893_tab;
468                 state->init_1x93_wtab = init_1893_wtab;
469                 state->tab_size = sizeof(init_1893_tab);
470                 break;
471
472         case 0xdd: /* VES1893A rev2 */
473                 printk("ves1x93: Detected ves1893a rev2\n");
474                 state->demod_type = DEMOD_VES1893;
475                 state->init_1x93_tab = init_1893_tab;
476                 state->init_1x93_wtab = init_1893_wtab;
477                 state->tab_size = sizeof(init_1893_tab);
478                 break;
479
480         case 0xde: /* VES1993 */
481                 printk("ves1x93: Detected ves1993\n");
482                 state->demod_type = DEMOD_VES1993;
483                 state->init_1x93_tab = init_1993_tab;
484                 state->init_1x93_wtab = init_1993_wtab;
485                 state->tab_size = sizeof(init_1993_tab);
486                 break;
487
488         default:
489                 goto error;
490         }
491
492         /* create dvb_frontend */
493         memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
494         state->frontend.demodulator_priv = state;
495         return &state->frontend;
496
497 error:
498         kfree(state);
499         return NULL;
500 }
501
502 static const struct dvb_frontend_ops ves1x93_ops = {
503         .delsys = { SYS_DVBS },
504         .info = {
505                 .name                   = "VLSI VES1x93 DVB-S",
506                 .frequency_min_hz       =   950 * MHz,
507                 .frequency_max_hz       =  2150 * MHz,
508                 .frequency_stepsize_hz  =   125 * kHz,
509                 .frequency_tolerance_hz = 29500 * kHz,
510                 .symbol_rate_min        = 1000000,
511                 .symbol_rate_max        = 45000000,
512         /*      .symbol_rate_tolerance  =       ???,*/
513                 .caps = FE_CAN_INVERSION_AUTO |
514                         FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
515                         FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
516                         FE_CAN_QPSK
517         },
518
519         .release = ves1x93_release,
520
521         .init = ves1x93_init,
522         .sleep = ves1x93_sleep,
523         .i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
524
525         .set_frontend = ves1x93_set_frontend,
526         .get_frontend = ves1x93_get_frontend,
527
528         .read_status = ves1x93_read_status,
529         .read_ber = ves1x93_read_ber,
530         .read_signal_strength = ves1x93_read_signal_strength,
531         .read_snr = ves1x93_read_snr,
532         .read_ucblocks = ves1x93_read_ucblocks,
533
534         .set_voltage = ves1x93_set_voltage,
535 };
536
537 module_param(debug, int, 0644);
538
539 MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
540 MODULE_AUTHOR("Ralph Metzler");
541 MODULE_LICENSE("GPL");
542
543 EXPORT_SYMBOL(ves1x93_attach);