spnego: add missing OID to oid registry
[sfrench/cifs-2.6.git] / drivers / media / dvb-frontends / tda10021.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3     TDA10021  - Single Chip Cable Channel Receiver driver module
4                used on the Siemens DVB-C cards
5
6     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
7     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
8                    Support for TDA10021
9
10 */
11
12 #include <linux/delay.h>
13 #include <linux/errno.h>
14 #include <linux/init.h>
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/string.h>
18 #include <linux/slab.h>
19
20 #include <media/dvb_frontend.h>
21 #include "tda1002x.h"
22
23
24 struct tda10021_state {
25         struct i2c_adapter* i2c;
26         /* configuration settings */
27         const struct tda1002x_config* config;
28         struct dvb_frontend frontend;
29
30         u8 pwm;
31         u8 reg0;
32 };
33
34
35 #if 0
36 #define dprintk(x...) printk(x)
37 #else
38 #define dprintk(x...)
39 #endif
40
41 static int verbose;
42
43 #define XIN 57840000UL
44
45 #define FIN (XIN >> 4)
46
47 static int tda10021_inittab_size = 0x40;
48 static u8 tda10021_inittab[0x40]=
49 {
50         0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
51         0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
52         0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
53         0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
54         0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
55         0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
56         0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
57         0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
58 };
59
60 static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
61 {
62         u8 buf[] = { reg, data };
63         struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
64         int ret;
65
66         ret = i2c_transfer (state->i2c, &msg, 1);
67         if (ret != 1)
68                 printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
69                         state->frontend.dvb->num, __func__, reg, data, ret);
70
71         msleep(10);
72         return (ret != 1) ? -EREMOTEIO : 0;
73 }
74
75 static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
76 {
77         u8 b0 [] = { reg };
78         u8 b1 [] = { 0 };
79         struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
80                                   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
81         int ret;
82
83         ret = i2c_transfer (state->i2c, msg, 2);
84         // Don't print an error message if the id is read.
85         if (ret != 2 && reg != 0x1a)
86                 printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
87                                 __func__, ret);
88         return b1[0];
89 }
90
91 //get access to tuner
92 static int lock_tuner(struct tda10021_state* state)
93 {
94         u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
95         struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
96
97         if(i2c_transfer(state->i2c, &msg, 1) != 1)
98         {
99                 printk("tda10021: lock tuner fails\n");
100                 return -EREMOTEIO;
101         }
102         return 0;
103 }
104
105 //release access from tuner
106 static int unlock_tuner(struct tda10021_state* state)
107 {
108         u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
109         struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
110
111         if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
112         {
113                 printk("tda10021: unlock tuner fails\n");
114                 return -EREMOTEIO;
115         }
116         return 0;
117 }
118
119 static int tda10021_setup_reg0(struct tda10021_state *state, u8 reg0,
120                                enum fe_spectral_inversion inversion)
121 {
122         reg0 |= state->reg0 & 0x63;
123
124         if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
125                 reg0 &= ~0x20;
126         else
127                 reg0 |= 0x20;
128
129         _tda10021_writereg (state, 0x00, reg0 & 0xfe);
130         _tda10021_writereg (state, 0x00, reg0 | 0x01);
131
132         state->reg0 = reg0;
133         return 0;
134 }
135
136 static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
137 {
138         s32 BDR;
139         s32 BDRI;
140         s16 SFIL = 0;
141         u16 NDEC = 0;
142         u32 tmp, ratio;
143
144         if (symbolrate > XIN / 2)
145                 symbolrate = XIN / 2;
146         else if (symbolrate < 500000)
147                 symbolrate = 500000;
148
149         if (symbolrate < XIN / 16)
150                 NDEC = 1;
151         if (symbolrate < XIN / 32)
152                 NDEC = 2;
153         if (symbolrate < XIN / 64)
154                 NDEC = 3;
155
156         if (symbolrate < XIN * 10 / 123)
157                 SFIL = 1;
158         if (symbolrate < XIN * 10 / 160)
159                 SFIL = 0;
160         if (symbolrate < XIN * 10 / 246)
161                 SFIL = 1;
162         if (symbolrate < XIN * 10 / 320)
163                 SFIL = 0;
164         if (symbolrate < XIN * 10 / 492)
165                 SFIL = 1;
166         if (symbolrate < XIN * 10 / 640)
167                 SFIL = 0;
168         if (symbolrate < XIN * 10 / 984)
169                 SFIL = 1;
170
171         symbolrate <<= NDEC;
172         ratio = (symbolrate << 4) / FIN;
173         tmp =  ((symbolrate << 4) % FIN) << 8;
174         ratio = (ratio << 8) + tmp / FIN;
175         tmp = (tmp % FIN) << 8;
176         ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
177
178         BDR = ratio;
179         BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
180
181         if (BDRI > 0xFF)
182                 BDRI = 0xFF;
183
184         SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
185
186         NDEC = (NDEC << 6) | tda10021_inittab[0x03];
187
188         _tda10021_writereg (state, 0x03, NDEC);
189         _tda10021_writereg (state, 0x0a, BDR&0xff);
190         _tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
191         _tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
192
193         _tda10021_writereg (state, 0x0d, BDRI);
194         _tda10021_writereg (state, 0x0e, SFIL);
195
196         return 0;
197 }
198
199 static int tda10021_init (struct dvb_frontend *fe)
200 {
201         struct tda10021_state* state = fe->demodulator_priv;
202         int i;
203
204         dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
205
206         //_tda10021_writereg (fe, 0, 0);
207
208         for (i=0; i<tda10021_inittab_size; i++)
209                 _tda10021_writereg (state, i, tda10021_inittab[i]);
210
211         _tda10021_writereg (state, 0x34, state->pwm);
212
213         //Comment by markus
214         //0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
215         //0x2A[4] == BYPPLL -> Power down mode (default 1)
216         //0x2A[5] == LCK -> PLL Lock Flag
217         //0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
218
219         //Activate PLL
220         _tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
221         return 0;
222 }
223
224 struct qam_params {
225         u8 conf, agcref, lthr, mseth, aref;
226 };
227
228 static int tda10021_set_parameters(struct dvb_frontend *fe)
229 {
230         struct dtv_frontend_properties *c = &fe->dtv_property_cache;
231         u32 delsys  = c->delivery_system;
232         unsigned qam = c->modulation;
233         bool is_annex_c;
234         u32 reg0x3d;
235         struct tda10021_state* state = fe->demodulator_priv;
236         static const struct qam_params qam_params[] = {
237                 /* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
238                 [QPSK]     = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
239                 [QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
240                 [QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
241                 [QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
242                 [QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
243                 [QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
244         };
245
246         switch (delsys) {
247         case SYS_DVBC_ANNEX_A:
248                 is_annex_c = false;
249                 break;
250         case SYS_DVBC_ANNEX_C:
251                 is_annex_c = true;
252                 break;
253         default:
254                 return -EINVAL;
255         }
256
257         /*
258          * gcc optimizes the code below the same way as it would code:
259          *           "if (qam > 5) return -EINVAL;"
260          * Yet, the code is clearer, as it shows what QAM standards are
261          * supported by the driver, and avoids the usage of magic numbers on
262          * it.
263          */
264         switch (qam) {
265         case QPSK:
266         case QAM_16:
267         case QAM_32:
268         case QAM_64:
269         case QAM_128:
270         case QAM_256:
271                 break;
272         default:
273                 return -EINVAL;
274         }
275
276         if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
277                 return -EINVAL;
278
279         /*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
280
281         if (fe->ops.tuner_ops.set_params) {
282                 fe->ops.tuner_ops.set_params(fe);
283                 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
284         }
285
286         tda10021_set_symbolrate(state, c->symbol_rate);
287         _tda10021_writereg(state, 0x34, state->pwm);
288
289         _tda10021_writereg(state, 0x01, qam_params[qam].agcref);
290         _tda10021_writereg(state, 0x05, qam_params[qam].lthr);
291         _tda10021_writereg(state, 0x08, qam_params[qam].mseth);
292         _tda10021_writereg(state, 0x09, qam_params[qam].aref);
293
294         /*
295          * Bit 0 == 0 means roll-off = 0.15 (Annex A)
296          *       == 1 means roll-off = 0.13 (Annex C)
297          */
298         reg0x3d = tda10021_readreg (state, 0x3d);
299         if (is_annex_c)
300                 _tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
301         else
302                 _tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
303         tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
304
305         return 0;
306 }
307
308 static int tda10021_read_status(struct dvb_frontend *fe,
309                                 enum fe_status *status)
310 {
311         struct tda10021_state* state = fe->demodulator_priv;
312         int sync;
313
314         *status = 0;
315         //0x11[0] == EQALGO -> Equalizer algorithms state
316         //0x11[1] == CARLOCK -> Carrier locked
317         //0x11[2] == FSYNC -> Frame synchronisation
318         //0x11[3] == FEL -> Front End locked
319         //0x11[6] == NODVB -> DVB Mode Information
320         sync = tda10021_readreg (state, 0x11);
321
322         if (sync & 2)
323                 *status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
324
325         if (sync & 4)
326                 *status |= FE_HAS_SYNC|FE_HAS_VITERBI;
327
328         if (sync & 8)
329                 *status |= FE_HAS_LOCK;
330
331         return 0;
332 }
333
334 static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
335 {
336         struct tda10021_state* state = fe->demodulator_priv;
337
338         u32 _ber = tda10021_readreg(state, 0x14) |
339                 (tda10021_readreg(state, 0x15) << 8) |
340                 ((tda10021_readreg(state, 0x16) & 0x0f) << 16);
341         _tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
342                                         | (tda10021_inittab[0x10] & 0xc0));
343         *ber = 10 * _ber;
344
345         return 0;
346 }
347
348 static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
349 {
350         struct tda10021_state* state = fe->demodulator_priv;
351
352         u8 config = tda10021_readreg(state, 0x02);
353         u8 gain = tda10021_readreg(state, 0x17);
354         if (config & 0x02)
355                 /* the agc value is inverted */
356                 gain = ~gain;
357         *strength = (gain << 8) | gain;
358
359         return 0;
360 }
361
362 static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
363 {
364         struct tda10021_state* state = fe->demodulator_priv;
365
366         u8 quality = ~tda10021_readreg(state, 0x18);
367         *snr = (quality << 8) | quality;
368
369         return 0;
370 }
371
372 static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
373 {
374         struct tda10021_state* state = fe->demodulator_priv;
375
376         *ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
377         if (*ucblocks == 0x7f)
378                 *ucblocks = 0xffffffff;
379
380         /* reset uncorrected block counter */
381         _tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
382         _tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
383
384         return 0;
385 }
386
387 static int tda10021_get_frontend(struct dvb_frontend *fe,
388                                  struct dtv_frontend_properties *p)
389 {
390         struct tda10021_state* state = fe->demodulator_priv;
391         int sync;
392         s8 afc = 0;
393
394         sync = tda10021_readreg(state, 0x11);
395         afc = tda10021_readreg(state, 0x19);
396         if (verbose) {
397                 /* AFC only valid when carrier has been recovered */
398                 printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
399                                   "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
400                         state->frontend.dvb->num, afc,
401                        -((s32)p->symbol_rate * afc) >> 10);
402         }
403
404         p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
405         p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
406
407         p->fec_inner = FEC_NONE;
408         p->frequency = ((p->frequency + 31250) / 62500) * 62500;
409
410         if (sync & 2)
411                 p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
412
413         return 0;
414 }
415
416 static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
417 {
418         struct tda10021_state* state = fe->demodulator_priv;
419
420         if (enable) {
421                 lock_tuner(state);
422         } else {
423                 unlock_tuner(state);
424         }
425         return 0;
426 }
427
428 static int tda10021_sleep(struct dvb_frontend* fe)
429 {
430         struct tda10021_state* state = fe->demodulator_priv;
431
432         _tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
433         _tda10021_writereg (state, 0x00, 0x80);  /* standby */
434
435         return 0;
436 }
437
438 static void tda10021_release(struct dvb_frontend* fe)
439 {
440         struct tda10021_state* state = fe->demodulator_priv;
441         kfree(state);
442 }
443
444 static const struct dvb_frontend_ops tda10021_ops;
445
446 struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
447                                      struct i2c_adapter* i2c,
448                                      u8 pwm)
449 {
450         struct tda10021_state* state = NULL;
451         u8 id;
452
453         /* allocate memory for the internal state */
454         state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
455         if (state == NULL) goto error;
456
457         /* setup the state */
458         state->config = config;
459         state->i2c = i2c;
460         state->pwm = pwm;
461         state->reg0 = tda10021_inittab[0];
462
463         /* check if the demod is there */
464         id = tda10021_readreg(state, 0x1a);
465         if ((id & 0xf0) != 0x70) goto error;
466
467         /* Don't claim TDA10023 */
468         if (id == 0x7d)
469                 goto error;
470
471         printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
472                state->config->demod_address, id);
473
474         /* create dvb_frontend */
475         memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
476         state->frontend.demodulator_priv = state;
477         return &state->frontend;
478
479 error:
480         kfree(state);
481         return NULL;
482 }
483
484 static const struct dvb_frontend_ops tda10021_ops = {
485         .delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
486         .info = {
487                 .name = "Philips TDA10021 DVB-C",
488                 .frequency_min_hz =  47 * MHz,
489                 .frequency_max_hz = 862 * MHz,
490                 .frequency_stepsize_hz = 62500,
491                 .symbol_rate_min = (XIN / 2) / 64,     /* SACLK/64 == (XIN/2)/64 */
492                 .symbol_rate_max = (XIN / 2) / 4,      /* SACLK/4 */
493         #if 0
494                 .frequency_tolerance = ???,
495                 .symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
496         #endif
497                 .caps = 0x400 | //FE_CAN_QAM_4
498                         FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
499                         FE_CAN_QAM_128 | FE_CAN_QAM_256 |
500                         FE_CAN_FEC_AUTO
501         },
502
503         .release = tda10021_release,
504
505         .init = tda10021_init,
506         .sleep = tda10021_sleep,
507         .i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
508
509         .set_frontend = tda10021_set_parameters,
510         .get_frontend = tda10021_get_frontend,
511
512         .read_status = tda10021_read_status,
513         .read_ber = tda10021_read_ber,
514         .read_signal_strength = tda10021_read_signal_strength,
515         .read_snr = tda10021_read_snr,
516         .read_ucblocks = tda10021_read_ucblocks,
517 };
518
519 module_param(verbose, int, 0644);
520 MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
521
522 MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
523 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
524 MODULE_LICENSE("GPL");
525
526 EXPORT_SYMBOL(tda10021_attach);