PCI: hv: Remove unused hv_set_msi_entry_from_desc()
[sfrench/cifs-2.6.git] / drivers / auxdisplay / lcd2s.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  console driver for LCD2S 4x20 character displays connected through i2c.
4  *  The display also has a spi interface, but the driver does not support
5  *  this yet.
6  *
7  *  This is a driver allowing you to use a LCD2S 4x20 from modtronix
8  *  engineering as auxdisplay character device.
9  *
10  *  (C) 2019 by Lemonage Software GmbH
11  *  Author: Lars Pöschel <poeschel@lemonage.de>
12  *  All rights reserved.
13  */
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/slab.h>
17 #include <linux/i2c.h>
18 #include <linux/delay.h>
19
20 #include "charlcd.h"
21
22 #define LCD2S_CMD_CUR_MOVES_FWD         0x09
23 #define LCD2S_CMD_CUR_BLINK_OFF         0x10
24 #define LCD2S_CMD_CUR_UL_OFF            0x11
25 #define LCD2S_CMD_DISPLAY_OFF           0x12
26 #define LCD2S_CMD_CUR_BLINK_ON          0x18
27 #define LCD2S_CMD_CUR_UL_ON             0x19
28 #define LCD2S_CMD_DISPLAY_ON            0x1a
29 #define LCD2S_CMD_BACKLIGHT_OFF         0x20
30 #define LCD2S_CMD_BACKLIGHT_ON          0x28
31 #define LCD2S_CMD_WRITE                 0x80
32 #define LCD2S_CMD_MOV_CUR_RIGHT         0x83
33 #define LCD2S_CMD_MOV_CUR_LEFT          0x84
34 #define LCD2S_CMD_SHIFT_RIGHT           0x85
35 #define LCD2S_CMD_SHIFT_LEFT            0x86
36 #define LCD2S_CMD_SHIFT_UP              0x87
37 #define LCD2S_CMD_SHIFT_DOWN            0x88
38 #define LCD2S_CMD_CUR_ADDR              0x89
39 #define LCD2S_CMD_CUR_POS               0x8a
40 #define LCD2S_CMD_CUR_RESET             0x8b
41 #define LCD2S_CMD_CLEAR                 0x8c
42 #define LCD2S_CMD_DEF_CUSTOM_CHAR       0x92
43 #define LCD2S_CMD_READ_STATUS           0xd0
44
45 #define LCD2S_CHARACTER_SIZE            8
46
47 #define LCD2S_STATUS_BUF_MASK           0x7f
48
49 struct lcd2s_data {
50         struct i2c_client *i2c;
51         struct charlcd *charlcd;
52 };
53
54 static s32 lcd2s_wait_buf_free(const struct i2c_client *client, int count)
55 {
56         s32 status;
57
58         status = i2c_smbus_read_byte_data(client, LCD2S_CMD_READ_STATUS);
59         if (status < 0)
60                 return status;
61
62         while ((status & LCD2S_STATUS_BUF_MASK) < count) {
63                 mdelay(1);
64                 status = i2c_smbus_read_byte_data(client,
65                                                   LCD2S_CMD_READ_STATUS);
66                 if (status < 0)
67                         return status;
68         }
69         return 0;
70 }
71
72 static int lcd2s_i2c_master_send(const struct i2c_client *client,
73                                  const char *buf, int count)
74 {
75         s32 status;
76
77         status = lcd2s_wait_buf_free(client, count);
78         if (status < 0)
79                 return status;
80
81         return i2c_master_send(client, buf, count);
82 }
83
84 static int lcd2s_i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
85 {
86         s32 status;
87
88         status = lcd2s_wait_buf_free(client, 1);
89         if (status < 0)
90                 return status;
91
92         return i2c_smbus_write_byte(client, value);
93 }
94
95 static int lcd2s_print(struct charlcd *lcd, int c)
96 {
97         struct lcd2s_data *lcd2s = lcd->drvdata;
98         u8 buf[2] = { LCD2S_CMD_WRITE, c };
99
100         lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf));
101         return 0;
102 }
103
104 static int lcd2s_gotoxy(struct charlcd *lcd, unsigned int x, unsigned int y)
105 {
106         struct lcd2s_data *lcd2s = lcd->drvdata;
107         u8 buf[] = { LCD2S_CMD_CUR_POS, y + 1, x + 1};
108
109         lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf));
110
111         return 0;
112 }
113
114 static int lcd2s_home(struct charlcd *lcd)
115 {
116         struct lcd2s_data *lcd2s = lcd->drvdata;
117
118         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_RESET);
119         return 0;
120 }
121
122 static int lcd2s_init_display(struct charlcd *lcd)
123 {
124         struct lcd2s_data *lcd2s = lcd->drvdata;
125
126         /* turn everything off, but display on */
127         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_ON);
128         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_OFF);
129         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_MOVES_FWD);
130         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_OFF);
131         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_OFF);
132         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CLEAR);
133
134         return 0;
135 }
136
137 static int lcd2s_shift_cursor(struct charlcd *lcd, enum charlcd_shift_dir dir)
138 {
139         struct lcd2s_data *lcd2s = lcd->drvdata;
140
141         if (dir == CHARLCD_SHIFT_LEFT)
142                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_MOV_CUR_LEFT);
143         else
144                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_MOV_CUR_RIGHT);
145
146         return 0;
147 }
148
149 static int lcd2s_shift_display(struct charlcd *lcd, enum charlcd_shift_dir dir)
150 {
151         struct lcd2s_data *lcd2s = lcd->drvdata;
152
153         if (dir == CHARLCD_SHIFT_LEFT)
154                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_SHIFT_LEFT);
155         else
156                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_SHIFT_RIGHT);
157
158         return 0;
159 }
160
161 static void lcd2s_backlight(struct charlcd *lcd, enum charlcd_onoff on)
162 {
163         struct lcd2s_data *lcd2s = lcd->drvdata;
164
165         if (on)
166                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_ON);
167         else
168                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_BACKLIGHT_OFF);
169 }
170
171 static int lcd2s_display(struct charlcd *lcd, enum charlcd_onoff on)
172 {
173         struct lcd2s_data *lcd2s = lcd->drvdata;
174
175         if (on)
176                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_ON);
177         else
178                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_DISPLAY_OFF);
179
180         return 0;
181 }
182
183 static int lcd2s_cursor(struct charlcd *lcd, enum charlcd_onoff on)
184 {
185         struct lcd2s_data *lcd2s = lcd->drvdata;
186
187         if (on)
188                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_ON);
189         else
190                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_UL_OFF);
191
192         return 0;
193 }
194
195 static int lcd2s_blink(struct charlcd *lcd, enum charlcd_onoff on)
196 {
197         struct lcd2s_data *lcd2s = lcd->drvdata;
198
199         if (on)
200                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_ON);
201         else
202                 lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CUR_BLINK_OFF);
203
204         return 0;
205 }
206
207 static int lcd2s_fontsize(struct charlcd *lcd, enum charlcd_fontsize size)
208 {
209         return 0;
210 }
211
212 static int lcd2s_lines(struct charlcd *lcd, enum charlcd_lines lines)
213 {
214         return 0;
215 }
216
217 static int lcd2s_redefine_char(struct charlcd *lcd, char *esc)
218 {
219         /* Generator : LGcxxxxx...xx; must have <c> between '0'
220          * and '7', representing the numerical ASCII code of the
221          * redefined character, and <xx...xx> a sequence of 16
222          * hex digits representing 8 bytes for each character.
223          * Most LCDs will only use 5 lower bits of the 7 first
224          * bytes.
225          */
226
227         struct lcd2s_data *lcd2s = lcd->drvdata;
228         u8 buf[LCD2S_CHARACTER_SIZE + 2] = { LCD2S_CMD_DEF_CUSTOM_CHAR };
229         u8 value;
230         int shift, i;
231
232         if (!strchr(esc, ';'))
233                 return 0;
234
235         esc++;
236
237         buf[1] = *(esc++) - '0';
238         if (buf[1] > 7)
239                 return 1;
240
241         i = 2;
242         shift = 0;
243         value = 0;
244         while (*esc && i < LCD2S_CHARACTER_SIZE + 2) {
245                 int half;
246
247                 shift ^= 4;
248                 half = hex_to_bin(*esc++);
249                 if (half < 0)
250                         continue;
251
252                 value |= half << shift;
253                 if (shift == 0) {
254                         buf[i++] = value;
255                         value = 0;
256                 }
257         }
258
259         lcd2s_i2c_master_send(lcd2s->i2c, buf, sizeof(buf));
260         return 1;
261 }
262
263 static int lcd2s_clear_display(struct charlcd *lcd)
264 {
265         struct lcd2s_data *lcd2s = lcd->drvdata;
266
267         /* This implicitly sets cursor to first row and column */
268         lcd2s_i2c_smbus_write_byte(lcd2s->i2c, LCD2S_CMD_CLEAR);
269         return 0;
270 }
271
272 static const struct charlcd_ops lcd2s_ops = {
273         .print          = lcd2s_print,
274         .backlight      = lcd2s_backlight,
275         .gotoxy         = lcd2s_gotoxy,
276         .home           = lcd2s_home,
277         .clear_display  = lcd2s_clear_display,
278         .init_display   = lcd2s_init_display,
279         .shift_cursor   = lcd2s_shift_cursor,
280         .shift_display  = lcd2s_shift_display,
281         .display        = lcd2s_display,
282         .cursor         = lcd2s_cursor,
283         .blink          = lcd2s_blink,
284         .fontsize       = lcd2s_fontsize,
285         .lines          = lcd2s_lines,
286         .redefine_char  = lcd2s_redefine_char,
287 };
288
289 static int lcd2s_i2c_probe(struct i2c_client *i2c,
290                                 const struct i2c_device_id *id)
291 {
292         struct charlcd *lcd;
293         struct lcd2s_data *lcd2s;
294         int err;
295
296         if (!i2c_check_functionality(i2c->adapter,
297                         I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
298                         I2C_FUNC_SMBUS_WRITE_BLOCK_DATA))
299                 return -EIO;
300
301         lcd2s = devm_kzalloc(&i2c->dev, sizeof(*lcd2s), GFP_KERNEL);
302         if (!lcd2s)
303                 return -ENOMEM;
304
305         /* Test, if the display is responding */
306         err = lcd2s_i2c_smbus_write_byte(i2c, LCD2S_CMD_DISPLAY_OFF);
307         if (err < 0)
308                 return err;
309
310         lcd = charlcd_alloc();
311         if (!lcd)
312                 return -ENOMEM;
313
314         lcd->drvdata = lcd2s;
315         lcd2s->i2c = i2c;
316         lcd2s->charlcd = lcd;
317
318         /* Required properties */
319         err = device_property_read_u32(&i2c->dev, "display-height-chars",
320                         &lcd->height);
321         if (err)
322                 goto fail1;
323
324         err = device_property_read_u32(&i2c->dev, "display-width-chars",
325                         &lcd->width);
326         if (err)
327                 goto fail1;
328
329         lcd->ops = &lcd2s_ops;
330
331         err = charlcd_register(lcd2s->charlcd);
332         if (err)
333                 goto fail1;
334
335         i2c_set_clientdata(i2c, lcd2s);
336         return 0;
337
338 fail1:
339         charlcd_free(lcd2s->charlcd);
340         return err;
341 }
342
343 static int lcd2s_i2c_remove(struct i2c_client *i2c)
344 {
345         struct lcd2s_data *lcd2s = i2c_get_clientdata(i2c);
346
347         charlcd_unregister(lcd2s->charlcd);
348         charlcd_free(lcd2s->charlcd);
349         return 0;
350 }
351
352 static const struct i2c_device_id lcd2s_i2c_id[] = {
353         { "lcd2s", 0 },
354         { }
355 };
356 MODULE_DEVICE_TABLE(i2c, lcd2s_i2c_id);
357
358 #ifdef CONFIG_OF
359 static const struct of_device_id lcd2s_of_table[] = {
360         { .compatible = "modtronix,lcd2s" },
361         { }
362 };
363 MODULE_DEVICE_TABLE(of, lcd2s_of_table);
364 #endif
365
366 static struct i2c_driver lcd2s_i2c_driver = {
367         .driver = {
368                 .name = "lcd2s",
369 #ifdef CONFIG_OF
370                 .of_match_table = of_match_ptr(lcd2s_of_table),
371 #endif
372         },
373         .probe = lcd2s_i2c_probe,
374         .remove = lcd2s_i2c_remove,
375         .id_table = lcd2s_i2c_id,
376 };
377
378 static int __init lcd2s_modinit(void)
379 {
380         int ret = 0;
381
382         ret = i2c_add_driver(&lcd2s_i2c_driver);
383         if (ret != 0)
384                 pr_err("Failed to register lcd2s driver\n");
385
386         return ret;
387 }
388 module_init(lcd2s_modinit)
389
390 static void __exit lcd2s_exit(void)
391 {
392         i2c_del_driver(&lcd2s_i2c_driver);
393 }
394 module_exit(lcd2s_exit)
395
396 MODULE_DESCRIPTION("LCD2S character display driver");
397 MODULE_AUTHOR("Lars Poeschel");
398 MODULE_LICENSE("GPL");