4680e310e68a4337a2a2a37b711aa087b83f5146
[sfrench/cifs-2.6.git] / arch / powerpc / mm / numa.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * pSeries NUMA support
4  *
5  * Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
6  */
7 #define pr_fmt(fmt) "numa: " fmt
8
9 #include <linux/threads.h>
10 #include <linux/memblock.h>
11 #include <linux/init.h>
12 #include <linux/mm.h>
13 #include <linux/mmzone.h>
14 #include <linux/export.h>
15 #include <linux/nodemask.h>
16 #include <linux/cpu.h>
17 #include <linux/notifier.h>
18 #include <linux/of.h>
19 #include <linux/pfn.h>
20 #include <linux/cpuset.h>
21 #include <linux/node.h>
22 #include <linux/stop_machine.h>
23 #include <linux/proc_fs.h>
24 #include <linux/seq_file.h>
25 #include <linux/uaccess.h>
26 #include <linux/slab.h>
27 #include <asm/cputhreads.h>
28 #include <asm/sparsemem.h>
29 #include <asm/smp.h>
30 #include <asm/topology.h>
31 #include <asm/firmware.h>
32 #include <asm/paca.h>
33 #include <asm/hvcall.h>
34 #include <asm/setup.h>
35 #include <asm/vdso.h>
36 #include <asm/drmem.h>
37
38 static int numa_enabled = 1;
39
40 static char *cmdline __initdata;
41
42 int numa_cpu_lookup_table[NR_CPUS];
43 cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
44 struct pglist_data *node_data[MAX_NUMNODES];
45
46 EXPORT_SYMBOL(numa_cpu_lookup_table);
47 EXPORT_SYMBOL(node_to_cpumask_map);
48 EXPORT_SYMBOL(node_data);
49
50 static int primary_domain_index;
51 static int n_mem_addr_cells, n_mem_size_cells;
52
53 #define FORM0_AFFINITY 0
54 #define FORM1_AFFINITY 1
55 #define FORM2_AFFINITY 2
56 static int affinity_form;
57
58 #define MAX_DISTANCE_REF_POINTS 4
59 static int distance_ref_points_depth;
60 static const __be32 *distance_ref_points;
61 static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS];
62 static int numa_distance_table[MAX_NUMNODES][MAX_NUMNODES] = {
63         [0 ... MAX_NUMNODES - 1] = { [0 ... MAX_NUMNODES - 1] = -1 }
64 };
65 static int numa_id_index_table[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = NUMA_NO_NODE };
66
67 /*
68  * Allocate node_to_cpumask_map based on number of available nodes
69  * Requires node_possible_map to be valid.
70  *
71  * Note: cpumask_of_node() is not valid until after this is done.
72  */
73 static void __init setup_node_to_cpumask_map(void)
74 {
75         unsigned int node;
76
77         /* setup nr_node_ids if not done yet */
78         if (nr_node_ids == MAX_NUMNODES)
79                 setup_nr_node_ids();
80
81         /* allocate the map */
82         for_each_node(node)
83                 alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
84
85         /* cpumask_of_node() will now work */
86         pr_debug("Node to cpumask map for %u nodes\n", nr_node_ids);
87 }
88
89 static int __init fake_numa_create_new_node(unsigned long end_pfn,
90                                                 unsigned int *nid)
91 {
92         unsigned long long mem;
93         char *p = cmdline;
94         static unsigned int fake_nid;
95         static unsigned long long curr_boundary;
96
97         /*
98          * Modify node id, iff we started creating NUMA nodes
99          * We want to continue from where we left of the last time
100          */
101         if (fake_nid)
102                 *nid = fake_nid;
103         /*
104          * In case there are no more arguments to parse, the
105          * node_id should be the same as the last fake node id
106          * (we've handled this above).
107          */
108         if (!p)
109                 return 0;
110
111         mem = memparse(p, &p);
112         if (!mem)
113                 return 0;
114
115         if (mem < curr_boundary)
116                 return 0;
117
118         curr_boundary = mem;
119
120         if ((end_pfn << PAGE_SHIFT) > mem) {
121                 /*
122                  * Skip commas and spaces
123                  */
124                 while (*p == ',' || *p == ' ' || *p == '\t')
125                         p++;
126
127                 cmdline = p;
128                 fake_nid++;
129                 *nid = fake_nid;
130                 pr_debug("created new fake_node with id %d\n", fake_nid);
131                 return 1;
132         }
133         return 0;
134 }
135
136 static void __init reset_numa_cpu_lookup_table(void)
137 {
138         unsigned int cpu;
139
140         for_each_possible_cpu(cpu)
141                 numa_cpu_lookup_table[cpu] = -1;
142 }
143
144 void map_cpu_to_node(int cpu, int node)
145 {
146         update_numa_cpu_lookup_table(cpu, node);
147
148         if (!(cpumask_test_cpu(cpu, node_to_cpumask_map[node]))) {
149                 pr_debug("adding cpu %d to node %d\n", cpu, node);
150                 cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
151         }
152 }
153
154 #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PPC_SPLPAR)
155 void unmap_cpu_from_node(unsigned long cpu)
156 {
157         int node = numa_cpu_lookup_table[cpu];
158
159         if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
160                 cpumask_clear_cpu(cpu, node_to_cpumask_map[node]);
161                 pr_debug("removing cpu %lu from node %d\n", cpu, node);
162         } else {
163                 pr_warn("Warning: cpu %lu not found in node %d\n", cpu, node);
164         }
165 }
166 #endif /* CONFIG_HOTPLUG_CPU || CONFIG_PPC_SPLPAR */
167
168 static int __associativity_to_nid(const __be32 *associativity,
169                                   int max_array_sz)
170 {
171         int nid;
172         /*
173          * primary_domain_index is 1 based array index.
174          */
175         int index = primary_domain_index  - 1;
176
177         if (!numa_enabled || index >= max_array_sz)
178                 return NUMA_NO_NODE;
179
180         nid = of_read_number(&associativity[index], 1);
181
182         /* POWER4 LPAR uses 0xffff as invalid node */
183         if (nid == 0xffff || nid >= nr_node_ids)
184                 nid = NUMA_NO_NODE;
185         return nid;
186 }
187 /*
188  * Returns nid in the range [0..nr_node_ids], or -1 if no useful NUMA
189  * info is found.
190  */
191 static int associativity_to_nid(const __be32 *associativity)
192 {
193         int array_sz = of_read_number(associativity, 1);
194
195         /* Skip the first element in the associativity array */
196         return __associativity_to_nid((associativity + 1), array_sz);
197 }
198
199 static int __cpu_form2_relative_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc)
200 {
201         int dist;
202         int node1, node2;
203
204         node1 = associativity_to_nid(cpu1_assoc);
205         node2 = associativity_to_nid(cpu2_assoc);
206
207         dist = numa_distance_table[node1][node2];
208         if (dist <= LOCAL_DISTANCE)
209                 return 0;
210         else if (dist <= REMOTE_DISTANCE)
211                 return 1;
212         else
213                 return 2;
214 }
215
216 static int __cpu_form1_relative_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc)
217 {
218         int dist = 0;
219
220         int i, index;
221
222         for (i = 0; i < distance_ref_points_depth; i++) {
223                 index = be32_to_cpu(distance_ref_points[i]);
224                 if (cpu1_assoc[index] == cpu2_assoc[index])
225                         break;
226                 dist++;
227         }
228
229         return dist;
230 }
231
232 int cpu_relative_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc)
233 {
234         /* We should not get called with FORM0 */
235         VM_WARN_ON(affinity_form == FORM0_AFFINITY);
236         if (affinity_form == FORM1_AFFINITY)
237                 return __cpu_form1_relative_distance(cpu1_assoc, cpu2_assoc);
238         return __cpu_form2_relative_distance(cpu1_assoc, cpu2_assoc);
239 }
240
241 /* must hold reference to node during call */
242 static const __be32 *of_get_associativity(struct device_node *dev)
243 {
244         return of_get_property(dev, "ibm,associativity", NULL);
245 }
246
247 int __node_distance(int a, int b)
248 {
249         int i;
250         int distance = LOCAL_DISTANCE;
251
252         if (affinity_form == FORM2_AFFINITY)
253                 return numa_distance_table[a][b];
254         else if (affinity_form == FORM0_AFFINITY)
255                 return ((a == b) ? LOCAL_DISTANCE : REMOTE_DISTANCE);
256
257         for (i = 0; i < distance_ref_points_depth; i++) {
258                 if (distance_lookup_table[a][i] == distance_lookup_table[b][i])
259                         break;
260
261                 /* Double the distance for each NUMA level */
262                 distance *= 2;
263         }
264
265         return distance;
266 }
267 EXPORT_SYMBOL(__node_distance);
268
269 /* Returns the nid associated with the given device tree node,
270  * or -1 if not found.
271  */
272 static int of_node_to_nid_single(struct device_node *device)
273 {
274         int nid = NUMA_NO_NODE;
275         const __be32 *tmp;
276
277         tmp = of_get_associativity(device);
278         if (tmp)
279                 nid = associativity_to_nid(tmp);
280         return nid;
281 }
282
283 /* Walk the device tree upwards, looking for an associativity id */
284 int of_node_to_nid(struct device_node *device)
285 {
286         int nid = NUMA_NO_NODE;
287
288         of_node_get(device);
289         while (device) {
290                 nid = of_node_to_nid_single(device);
291                 if (nid != -1)
292                         break;
293
294                 device = of_get_next_parent(device);
295         }
296         of_node_put(device);
297
298         return nid;
299 }
300 EXPORT_SYMBOL(of_node_to_nid);
301
302 static void __initialize_form1_numa_distance(const __be32 *associativity,
303                                              int max_array_sz)
304 {
305         int i, nid;
306
307         if (affinity_form != FORM1_AFFINITY)
308                 return;
309
310         nid = __associativity_to_nid(associativity, max_array_sz);
311         if (nid != NUMA_NO_NODE) {
312                 for (i = 0; i < distance_ref_points_depth; i++) {
313                         const __be32 *entry;
314                         int index = be32_to_cpu(distance_ref_points[i]) - 1;
315
316                         /*
317                          * broken hierarchy, return with broken distance table
318                          */
319                         if (WARN(index >= max_array_sz, "Broken ibm,associativity property"))
320                                 return;
321
322                         entry = &associativity[index];
323                         distance_lookup_table[nid][i] = of_read_number(entry, 1);
324                 }
325         }
326 }
327
328 static void initialize_form1_numa_distance(const __be32 *associativity)
329 {
330         int array_sz;
331
332         array_sz = of_read_number(associativity, 1);
333         /* Skip the first element in the associativity array */
334         __initialize_form1_numa_distance(associativity + 1, array_sz);
335 }
336
337 /*
338  * Used to update distance information w.r.t newly added node.
339  */
340 void update_numa_distance(struct device_node *node)
341 {
342         int nid;
343
344         if (affinity_form == FORM0_AFFINITY)
345                 return;
346         else if (affinity_form == FORM1_AFFINITY) {
347                 const __be32 *associativity;
348
349                 associativity = of_get_associativity(node);
350                 if (!associativity)
351                         return;
352
353                 initialize_form1_numa_distance(associativity);
354                 return;
355         }
356
357         /* FORM2 affinity  */
358         nid = of_node_to_nid_single(node);
359         if (nid == NUMA_NO_NODE)
360                 return;
361
362         /*
363          * With FORM2 we expect NUMA distance of all possible NUMA
364          * nodes to be provided during boot.
365          */
366         WARN(numa_distance_table[nid][nid] == -1,
367              "NUMA distance details for node %d not provided\n", nid);
368 }
369
370 /*
371  * ibm,numa-lookup-index-table= {N, domainid1, domainid2, ..... domainidN}
372  * ibm,numa-distance-table = { N, 1, 2, 4, 5, 1, 6, .... N elements}
373  */
374 static void __init initialize_form2_numa_distance_lookup_table(void)
375 {
376         int i, j;
377         struct device_node *root;
378         const __u8 *form2_distances;
379         const __be32 *numa_lookup_index;
380         int form2_distances_length;
381         int max_numa_index, distance_index;
382
383         if (firmware_has_feature(FW_FEATURE_OPAL))
384                 root = of_find_node_by_path("/ibm,opal");
385         else
386                 root = of_find_node_by_path("/rtas");
387         if (!root)
388                 root = of_find_node_by_path("/");
389
390         numa_lookup_index = of_get_property(root, "ibm,numa-lookup-index-table", NULL);
391         max_numa_index = of_read_number(&numa_lookup_index[0], 1);
392
393         /* first element of the array is the size and is encode-int */
394         form2_distances = of_get_property(root, "ibm,numa-distance-table", NULL);
395         form2_distances_length = of_read_number((const __be32 *)&form2_distances[0], 1);
396         /* Skip the size which is encoded int */
397         form2_distances += sizeof(__be32);
398
399         pr_debug("form2_distances_len = %d, numa_dist_indexes_len = %d\n",
400                  form2_distances_length, max_numa_index);
401
402         for (i = 0; i < max_numa_index; i++)
403                 /* +1 skip the max_numa_index in the property */
404                 numa_id_index_table[i] = of_read_number(&numa_lookup_index[i + 1], 1);
405
406
407         if (form2_distances_length != max_numa_index * max_numa_index) {
408                 WARN(1, "Wrong NUMA distance information\n");
409                 form2_distances = NULL; // don't use it
410         }
411         distance_index = 0;
412         for (i = 0;  i < max_numa_index; i++) {
413                 for (j = 0; j < max_numa_index; j++) {
414                         int nodeA = numa_id_index_table[i];
415                         int nodeB = numa_id_index_table[j];
416                         int dist;
417
418                         if (form2_distances)
419                                 dist = form2_distances[distance_index++];
420                         else if (nodeA == nodeB)
421                                 dist = LOCAL_DISTANCE;
422                         else
423                                 dist = REMOTE_DISTANCE;
424                         numa_distance_table[nodeA][nodeB] = dist;
425                         pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, dist);
426                 }
427         }
428
429         of_node_put(root);
430 }
431
432 static int __init find_primary_domain_index(void)
433 {
434         int index;
435         struct device_node *root;
436
437         /*
438          * Check for which form of affinity.
439          */
440         if (firmware_has_feature(FW_FEATURE_OPAL)) {
441                 affinity_form = FORM1_AFFINITY;
442         } else if (firmware_has_feature(FW_FEATURE_FORM2_AFFINITY)) {
443                 pr_debug("Using form 2 affinity\n");
444                 affinity_form = FORM2_AFFINITY;
445         } else if (firmware_has_feature(FW_FEATURE_FORM1_AFFINITY)) {
446                 pr_debug("Using form 1 affinity\n");
447                 affinity_form = FORM1_AFFINITY;
448         } else
449                 affinity_form = FORM0_AFFINITY;
450
451         if (firmware_has_feature(FW_FEATURE_OPAL))
452                 root = of_find_node_by_path("/ibm,opal");
453         else
454                 root = of_find_node_by_path("/rtas");
455         if (!root)
456                 root = of_find_node_by_path("/");
457
458         /*
459          * This property is a set of 32-bit integers, each representing
460          * an index into the ibm,associativity nodes.
461          *
462          * With form 0 affinity the first integer is for an SMP configuration
463          * (should be all 0's) and the second is for a normal NUMA
464          * configuration. We have only one level of NUMA.
465          *
466          * With form 1 affinity the first integer is the most significant
467          * NUMA boundary and the following are progressively less significant
468          * boundaries. There can be more than one level of NUMA.
469          */
470         distance_ref_points = of_get_property(root,
471                                         "ibm,associativity-reference-points",
472                                         &distance_ref_points_depth);
473
474         if (!distance_ref_points) {
475                 pr_debug("ibm,associativity-reference-points not found.\n");
476                 goto err;
477         }
478
479         distance_ref_points_depth /= sizeof(int);
480         if (affinity_form == FORM0_AFFINITY) {
481                 if (distance_ref_points_depth < 2) {
482                         pr_warn("short ibm,associativity-reference-points\n");
483                         goto err;
484                 }
485
486                 index = of_read_number(&distance_ref_points[1], 1);
487         } else {
488                 /*
489                  * Both FORM1 and FORM2 affinity find the primary domain details
490                  * at the same offset.
491                  */
492                 index = of_read_number(distance_ref_points, 1);
493         }
494         /*
495          * Warn and cap if the hardware supports more than
496          * MAX_DISTANCE_REF_POINTS domains.
497          */
498         if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) {
499                 pr_warn("distance array capped at %d entries\n",
500                         MAX_DISTANCE_REF_POINTS);
501                 distance_ref_points_depth = MAX_DISTANCE_REF_POINTS;
502         }
503
504         of_node_put(root);
505         return index;
506
507 err:
508         of_node_put(root);
509         return -1;
510 }
511
512 static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
513 {
514         struct device_node *memory = NULL;
515
516         memory = of_find_node_by_type(memory, "memory");
517         if (!memory)
518                 panic("numa.c: No memory nodes found!");
519
520         *n_addr_cells = of_n_addr_cells(memory);
521         *n_size_cells = of_n_size_cells(memory);
522         of_node_put(memory);
523 }
524
525 static unsigned long read_n_cells(int n, const __be32 **buf)
526 {
527         unsigned long result = 0;
528
529         while (n--) {
530                 result = (result << 32) | of_read_number(*buf, 1);
531                 (*buf)++;
532         }
533         return result;
534 }
535
536 struct assoc_arrays {
537         u32     n_arrays;
538         u32     array_sz;
539         const __be32 *arrays;
540 };
541
542 /*
543  * Retrieve and validate the list of associativity arrays for drconf
544  * memory from the ibm,associativity-lookup-arrays property of the
545  * device tree..
546  *
547  * The layout of the ibm,associativity-lookup-arrays property is a number N
548  * indicating the number of associativity arrays, followed by a number M
549  * indicating the size of each associativity array, followed by a list
550  * of N associativity arrays.
551  */
552 static int of_get_assoc_arrays(struct assoc_arrays *aa)
553 {
554         struct device_node *memory;
555         const __be32 *prop;
556         u32 len;
557
558         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
559         if (!memory)
560                 return -1;
561
562         prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
563         if (!prop || len < 2 * sizeof(unsigned int)) {
564                 of_node_put(memory);
565                 return -1;
566         }
567
568         aa->n_arrays = of_read_number(prop++, 1);
569         aa->array_sz = of_read_number(prop++, 1);
570
571         of_node_put(memory);
572
573         /* Now that we know the number of arrays and size of each array,
574          * revalidate the size of the property read in.
575          */
576         if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
577                 return -1;
578
579         aa->arrays = prop;
580         return 0;
581 }
582
583 static int __init get_nid_and_numa_distance(struct drmem_lmb *lmb)
584 {
585         struct assoc_arrays aa = { .arrays = NULL };
586         int default_nid = NUMA_NO_NODE;
587         int nid = default_nid;
588         int rc, index;
589
590         if ((primary_domain_index < 0) || !numa_enabled)
591                 return default_nid;
592
593         rc = of_get_assoc_arrays(&aa);
594         if (rc)
595                 return default_nid;
596
597         if (primary_domain_index <= aa.array_sz &&
598             !(lmb->flags & DRCONF_MEM_AI_INVALID) && lmb->aa_index < aa.n_arrays) {
599                 const __be32 *associativity;
600
601                 index = lmb->aa_index * aa.array_sz;
602                 associativity = &aa.arrays[index];
603                 nid = __associativity_to_nid(associativity, aa.array_sz);
604                 if (nid > 0 && affinity_form == FORM1_AFFINITY) {
605                         /*
606                          * lookup array associativity entries have
607                          * no length of the array as the first element.
608                          */
609                         __initialize_form1_numa_distance(associativity, aa.array_sz);
610                 }
611         }
612         return nid;
613 }
614
615 /*
616  * This is like of_node_to_nid_single() for memory represented in the
617  * ibm,dynamic-reconfiguration-memory node.
618  */
619 int of_drconf_to_nid_single(struct drmem_lmb *lmb)
620 {
621         struct assoc_arrays aa = { .arrays = NULL };
622         int default_nid = NUMA_NO_NODE;
623         int nid = default_nid;
624         int rc, index;
625
626         if ((primary_domain_index < 0) || !numa_enabled)
627                 return default_nid;
628
629         rc = of_get_assoc_arrays(&aa);
630         if (rc)
631                 return default_nid;
632
633         if (primary_domain_index <= aa.array_sz &&
634             !(lmb->flags & DRCONF_MEM_AI_INVALID) && lmb->aa_index < aa.n_arrays) {
635                 const __be32 *associativity;
636
637                 index = lmb->aa_index * aa.array_sz;
638                 associativity = &aa.arrays[index];
639                 nid = __associativity_to_nid(associativity, aa.array_sz);
640         }
641         return nid;
642 }
643
644 #ifdef CONFIG_PPC_SPLPAR
645
646 static int __vphn_get_associativity(long lcpu, __be32 *associativity)
647 {
648         long rc, hwid;
649
650         /*
651          * On a shared lpar, device tree will not have node associativity.
652          * At this time lppaca, or its __old_status field may not be
653          * updated. Hence kernel cannot detect if its on a shared lpar. So
654          * request an explicit associativity irrespective of whether the
655          * lpar is shared or dedicated. Use the device tree property as a
656          * fallback. cpu_to_phys_id is only valid between
657          * smp_setup_cpu_maps() and smp_setup_pacas().
658          */
659         if (firmware_has_feature(FW_FEATURE_VPHN)) {
660                 if (cpu_to_phys_id)
661                         hwid = cpu_to_phys_id[lcpu];
662                 else
663                         hwid = get_hard_smp_processor_id(lcpu);
664
665                 rc = hcall_vphn(hwid, VPHN_FLAG_VCPU, associativity);
666                 if (rc == H_SUCCESS)
667                         return 0;
668         }
669
670         return -1;
671 }
672
673 static int vphn_get_nid(long lcpu)
674 {
675         __be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
676
677
678         if (!__vphn_get_associativity(lcpu, associativity))
679                 return associativity_to_nid(associativity);
680
681         return NUMA_NO_NODE;
682
683 }
684 #else
685
686 static int __vphn_get_associativity(long lcpu, __be32 *associativity)
687 {
688         return -1;
689 }
690
691 static int vphn_get_nid(long unused)
692 {
693         return NUMA_NO_NODE;
694 }
695 #endif  /* CONFIG_PPC_SPLPAR */
696
697 /*
698  * Figure out to which domain a cpu belongs and stick it there.
699  * Return the id of the domain used.
700  */
701 static int numa_setup_cpu(unsigned long lcpu)
702 {
703         struct device_node *cpu;
704         int fcpu = cpu_first_thread_sibling(lcpu);
705         int nid = NUMA_NO_NODE;
706
707         if (!cpu_present(lcpu)) {
708                 set_cpu_numa_node(lcpu, first_online_node);
709                 return first_online_node;
710         }
711
712         /*
713          * If a valid cpu-to-node mapping is already available, use it
714          * directly instead of querying the firmware, since it represents
715          * the most recent mapping notified to us by the platform (eg: VPHN).
716          * Since cpu_to_node binding remains the same for all threads in the
717          * core. If a valid cpu-to-node mapping is already available, for
718          * the first thread in the core, use it.
719          */
720         nid = numa_cpu_lookup_table[fcpu];
721         if (nid >= 0) {
722                 map_cpu_to_node(lcpu, nid);
723                 return nid;
724         }
725
726         nid = vphn_get_nid(lcpu);
727         if (nid != NUMA_NO_NODE)
728                 goto out_present;
729
730         cpu = of_get_cpu_node(lcpu, NULL);
731
732         if (!cpu) {
733                 WARN_ON(1);
734                 if (cpu_present(lcpu))
735                         goto out_present;
736                 else
737                         goto out;
738         }
739
740         nid = of_node_to_nid_single(cpu);
741         of_node_put(cpu);
742
743 out_present:
744         if (nid < 0 || !node_possible(nid))
745                 nid = first_online_node;
746
747         /*
748          * Update for the first thread of the core. All threads of a core
749          * have to be part of the same node. This not only avoids querying
750          * for every other thread in the core, but always avoids a case
751          * where virtual node associativity change causes subsequent threads
752          * of a core to be associated with different nid. However if first
753          * thread is already online, expect it to have a valid mapping.
754          */
755         if (fcpu != lcpu) {
756                 WARN_ON(cpu_online(fcpu));
757                 map_cpu_to_node(fcpu, nid);
758         }
759
760         map_cpu_to_node(lcpu, nid);
761 out:
762         return nid;
763 }
764
765 static void verify_cpu_node_mapping(int cpu, int node)
766 {
767         int base, sibling, i;
768
769         /* Verify that all the threads in the core belong to the same node */
770         base = cpu_first_thread_sibling(cpu);
771
772         for (i = 0; i < threads_per_core; i++) {
773                 sibling = base + i;
774
775                 if (sibling == cpu || cpu_is_offline(sibling))
776                         continue;
777
778                 if (cpu_to_node(sibling) != node) {
779                         WARN(1, "CPU thread siblings %d and %d don't belong"
780                                 " to the same node!\n", cpu, sibling);
781                         break;
782                 }
783         }
784 }
785
786 /* Must run before sched domains notifier. */
787 static int ppc_numa_cpu_prepare(unsigned int cpu)
788 {
789         int nid;
790
791         nid = numa_setup_cpu(cpu);
792         verify_cpu_node_mapping(cpu, nid);
793         return 0;
794 }
795
796 static int ppc_numa_cpu_dead(unsigned int cpu)
797 {
798         return 0;
799 }
800
801 /*
802  * Check and possibly modify a memory region to enforce the memory limit.
803  *
804  * Returns the size the region should have to enforce the memory limit.
805  * This will either be the original value of size, a truncated value,
806  * or zero. If the returned value of size is 0 the region should be
807  * discarded as it lies wholly above the memory limit.
808  */
809 static unsigned long __init numa_enforce_memory_limit(unsigned long start,
810                                                       unsigned long size)
811 {
812         /*
813          * We use memblock_end_of_DRAM() in here instead of memory_limit because
814          * we've already adjusted it for the limit and it takes care of
815          * having memory holes below the limit.  Also, in the case of
816          * iommu_is_off, memory_limit is not set but is implicitly enforced.
817          */
818
819         if (start + size <= memblock_end_of_DRAM())
820                 return size;
821
822         if (start >= memblock_end_of_DRAM())
823                 return 0;
824
825         return memblock_end_of_DRAM() - start;
826 }
827
828 /*
829  * Reads the counter for a given entry in
830  * linux,drconf-usable-memory property
831  */
832 static inline int __init read_usm_ranges(const __be32 **usm)
833 {
834         /*
835          * For each lmb in ibm,dynamic-memory a corresponding
836          * entry in linux,drconf-usable-memory property contains
837          * a counter followed by that many (base, size) duple.
838          * read the counter from linux,drconf-usable-memory
839          */
840         return read_n_cells(n_mem_size_cells, usm);
841 }
842
843 /*
844  * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
845  * node.  This assumes n_mem_{addr,size}_cells have been set.
846  */
847 static int __init numa_setup_drmem_lmb(struct drmem_lmb *lmb,
848                                         const __be32 **usm,
849                                         void *data)
850 {
851         unsigned int ranges, is_kexec_kdump = 0;
852         unsigned long base, size, sz;
853         int nid;
854
855         /*
856          * Skip this block if the reserved bit is set in flags (0x80)
857          * or if the block is not assigned to this partition (0x8)
858          */
859         if ((lmb->flags & DRCONF_MEM_RESERVED)
860             || !(lmb->flags & DRCONF_MEM_ASSIGNED))
861                 return 0;
862
863         if (*usm)
864                 is_kexec_kdump = 1;
865
866         base = lmb->base_addr;
867         size = drmem_lmb_size();
868         ranges = 1;
869
870         if (is_kexec_kdump) {
871                 ranges = read_usm_ranges(usm);
872                 if (!ranges) /* there are no (base, size) duple */
873                         return 0;
874         }
875
876         do {
877                 if (is_kexec_kdump) {
878                         base = read_n_cells(n_mem_addr_cells, usm);
879                         size = read_n_cells(n_mem_size_cells, usm);
880                 }
881
882                 nid = get_nid_and_numa_distance(lmb);
883                 fake_numa_create_new_node(((base + size) >> PAGE_SHIFT),
884                                           &nid);
885                 node_set_online(nid);
886                 sz = numa_enforce_memory_limit(base, size);
887                 if (sz)
888                         memblock_set_node(base, sz, &memblock.memory, nid);
889         } while (--ranges);
890
891         return 0;
892 }
893
894 static int __init parse_numa_properties(void)
895 {
896         struct device_node *memory;
897         int default_nid = 0;
898         unsigned long i;
899         const __be32 *associativity;
900
901         if (numa_enabled == 0) {
902                 pr_warn("disabled by user\n");
903                 return -1;
904         }
905
906         primary_domain_index = find_primary_domain_index();
907
908         if (primary_domain_index < 0) {
909                 /*
910                  * if we fail to parse primary_domain_index from device tree
911                  * mark the numa disabled, boot with numa disabled.
912                  */
913                 numa_enabled = false;
914                 return primary_domain_index;
915         }
916
917         pr_debug("associativity depth for CPU/Memory: %d\n", primary_domain_index);
918
919         /*
920          * If it is FORM2 initialize the distance table here.
921          */
922         if (affinity_form == FORM2_AFFINITY)
923                 initialize_form2_numa_distance_lookup_table();
924
925         /*
926          * Even though we connect cpus to numa domains later in SMP
927          * init, we need to know the node ids now. This is because
928          * each node to be onlined must have NODE_DATA etc backing it.
929          */
930         for_each_present_cpu(i) {
931                 __be32 vphn_assoc[VPHN_ASSOC_BUFSIZE];
932                 struct device_node *cpu;
933                 int nid = NUMA_NO_NODE;
934
935                 memset(vphn_assoc, 0, VPHN_ASSOC_BUFSIZE * sizeof(__be32));
936
937                 if (__vphn_get_associativity(i, vphn_assoc) == 0) {
938                         nid = associativity_to_nid(vphn_assoc);
939                         initialize_form1_numa_distance(vphn_assoc);
940                 } else {
941
942                         /*
943                          * Don't fall back to default_nid yet -- we will plug
944                          * cpus into nodes once the memory scan has discovered
945                          * the topology.
946                          */
947                         cpu = of_get_cpu_node(i, NULL);
948                         BUG_ON(!cpu);
949
950                         associativity = of_get_associativity(cpu);
951                         if (associativity) {
952                                 nid = associativity_to_nid(associativity);
953                                 initialize_form1_numa_distance(associativity);
954                         }
955                         of_node_put(cpu);
956                 }
957
958                 /* node_set_online() is an UB if 'nid' is negative */
959                 if (likely(nid >= 0))
960                         node_set_online(nid);
961         }
962
963         get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
964
965         for_each_node_by_type(memory, "memory") {
966                 unsigned long start;
967                 unsigned long size;
968                 int nid;
969                 int ranges;
970                 const __be32 *memcell_buf;
971                 unsigned int len;
972
973                 memcell_buf = of_get_property(memory,
974                         "linux,usable-memory", &len);
975                 if (!memcell_buf || len <= 0)
976                         memcell_buf = of_get_property(memory, "reg", &len);
977                 if (!memcell_buf || len <= 0)
978                         continue;
979
980                 /* ranges in cell */
981                 ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
982 new_range:
983                 /* these are order-sensitive, and modify the buffer pointer */
984                 start = read_n_cells(n_mem_addr_cells, &memcell_buf);
985                 size = read_n_cells(n_mem_size_cells, &memcell_buf);
986
987                 /*
988                  * Assumption: either all memory nodes or none will
989                  * have associativity properties.  If none, then
990                  * everything goes to default_nid.
991                  */
992                 associativity = of_get_associativity(memory);
993                 if (associativity) {
994                         nid = associativity_to_nid(associativity);
995                         initialize_form1_numa_distance(associativity);
996                 } else
997                         nid = default_nid;
998
999                 fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid);
1000                 node_set_online(nid);
1001
1002                 size = numa_enforce_memory_limit(start, size);
1003                 if (size)
1004                         memblock_set_node(start, size, &memblock.memory, nid);
1005
1006                 if (--ranges)
1007                         goto new_range;
1008         }
1009
1010         /*
1011          * Now do the same thing for each MEMBLOCK listed in the
1012          * ibm,dynamic-memory property in the
1013          * ibm,dynamic-reconfiguration-memory node.
1014          */
1015         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
1016         if (memory) {
1017                 walk_drmem_lmbs(memory, NULL, numa_setup_drmem_lmb);
1018                 of_node_put(memory);
1019         }
1020
1021         return 0;
1022 }
1023
1024 static void __init setup_nonnuma(void)
1025 {
1026         unsigned long top_of_ram = memblock_end_of_DRAM();
1027         unsigned long total_ram = memblock_phys_mem_size();
1028         unsigned long start_pfn, end_pfn;
1029         unsigned int nid = 0;
1030         int i;
1031
1032         pr_debug("Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram);
1033         pr_debug("Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20);
1034
1035         for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, NULL) {
1036                 fake_numa_create_new_node(end_pfn, &nid);
1037                 memblock_set_node(PFN_PHYS(start_pfn),
1038                                   PFN_PHYS(end_pfn - start_pfn),
1039                                   &memblock.memory, nid);
1040                 node_set_online(nid);
1041         }
1042 }
1043
1044 void __init dump_numa_cpu_topology(void)
1045 {
1046         unsigned int node;
1047         unsigned int cpu, count;
1048
1049         if (!numa_enabled)
1050                 return;
1051
1052         for_each_online_node(node) {
1053                 pr_info("Node %d CPUs:", node);
1054
1055                 count = 0;
1056                 /*
1057                  * If we used a CPU iterator here we would miss printing
1058                  * the holes in the cpumap.
1059                  */
1060                 for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
1061                         if (cpumask_test_cpu(cpu,
1062                                         node_to_cpumask_map[node])) {
1063                                 if (count == 0)
1064                                         pr_cont(" %u", cpu);
1065                                 ++count;
1066                         } else {
1067                                 if (count > 1)
1068                                         pr_cont("-%u", cpu - 1);
1069                                 count = 0;
1070                         }
1071                 }
1072
1073                 if (count > 1)
1074                         pr_cont("-%u", nr_cpu_ids - 1);
1075                 pr_cont("\n");
1076         }
1077 }
1078
1079 /* Initialize NODE_DATA for a node on the local memory */
1080 static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
1081 {
1082         u64 spanned_pages = end_pfn - start_pfn;
1083         const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
1084         u64 nd_pa;
1085         void *nd;
1086         int tnid;
1087
1088         nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
1089         if (!nd_pa)
1090                 panic("Cannot allocate %zu bytes for node %d data\n",
1091                       nd_size, nid);
1092
1093         nd = __va(nd_pa);
1094
1095         /* report and initialize */
1096         pr_info("  NODE_DATA [mem %#010Lx-%#010Lx]\n",
1097                 nd_pa, nd_pa + nd_size - 1);
1098         tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
1099         if (tnid != nid)
1100                 pr_info("    NODE_DATA(%d) on node %d\n", nid, tnid);
1101
1102         node_data[nid] = nd;
1103         memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
1104         NODE_DATA(nid)->node_id = nid;
1105         NODE_DATA(nid)->node_start_pfn = start_pfn;
1106         NODE_DATA(nid)->node_spanned_pages = spanned_pages;
1107 }
1108
1109 static void __init find_possible_nodes(void)
1110 {
1111         struct device_node *rtas;
1112         const __be32 *domains = NULL;
1113         int prop_length, max_nodes;
1114         u32 i;
1115
1116         if (!numa_enabled)
1117                 return;
1118
1119         rtas = of_find_node_by_path("/rtas");
1120         if (!rtas)
1121                 return;
1122
1123         /*
1124          * ibm,current-associativity-domains is a fairly recent property. If
1125          * it doesn't exist, then fallback on ibm,max-associativity-domains.
1126          * Current denotes what the platform can support compared to max
1127          * which denotes what the Hypervisor can support.
1128          *
1129          * If the LPAR is migratable, new nodes might be activated after a LPM,
1130          * so we should consider the max number in that case.
1131          */
1132         if (!of_get_property(of_root, "ibm,migratable-partition", NULL))
1133                 domains = of_get_property(rtas,
1134                                           "ibm,current-associativity-domains",
1135                                           &prop_length);
1136         if (!domains) {
1137                 domains = of_get_property(rtas, "ibm,max-associativity-domains",
1138                                         &prop_length);
1139                 if (!domains)
1140                         goto out;
1141         }
1142
1143         max_nodes = of_read_number(&domains[primary_domain_index], 1);
1144         pr_info("Partition configured for %d NUMA nodes.\n", max_nodes);
1145
1146         for (i = 0; i < max_nodes; i++) {
1147                 if (!node_possible(i))
1148                         node_set(i, node_possible_map);
1149         }
1150
1151         prop_length /= sizeof(int);
1152         if (prop_length > primary_domain_index + 2)
1153                 coregroup_enabled = 1;
1154
1155 out:
1156         of_node_put(rtas);
1157 }
1158
1159 void __init mem_topology_setup(void)
1160 {
1161         int cpu;
1162
1163         /*
1164          * Linux/mm assumes node 0 to be online at boot. However this is not
1165          * true on PowerPC, where node 0 is similar to any other node, it
1166          * could be cpuless, memoryless node. So force node 0 to be offline
1167          * for now. This will prevent cpuless, memoryless node 0 showing up
1168          * unnecessarily as online. If a node has cpus or memory that need
1169          * to be online, then node will anyway be marked online.
1170          */
1171         node_set_offline(0);
1172
1173         if (parse_numa_properties())
1174                 setup_nonnuma();
1175
1176         /*
1177          * Modify the set of possible NUMA nodes to reflect information
1178          * available about the set of online nodes, and the set of nodes
1179          * that we expect to make use of for this platform's affinity
1180          * calculations.
1181          */
1182         nodes_and(node_possible_map, node_possible_map, node_online_map);
1183
1184         find_possible_nodes();
1185
1186         setup_node_to_cpumask_map();
1187
1188         reset_numa_cpu_lookup_table();
1189
1190         for_each_possible_cpu(cpu) {
1191                 /*
1192                  * Powerpc with CONFIG_NUMA always used to have a node 0,
1193                  * even if it was memoryless or cpuless. For all cpus that
1194                  * are possible but not present, cpu_to_node() would point
1195                  * to node 0. To remove a cpuless, memoryless dummy node,
1196                  * powerpc need to make sure all possible but not present
1197                  * cpu_to_node are set to a proper node.
1198                  */
1199                 numa_setup_cpu(cpu);
1200         }
1201 }
1202
1203 void __init initmem_init(void)
1204 {
1205         int nid;
1206
1207         max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
1208         max_pfn = max_low_pfn;
1209
1210         memblock_dump_all();
1211
1212         for_each_online_node(nid) {
1213                 unsigned long start_pfn, end_pfn;
1214
1215                 get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
1216                 setup_node_data(nid, start_pfn, end_pfn);
1217         }
1218
1219         sparse_init();
1220
1221         /*
1222          * We need the numa_cpu_lookup_table to be accurate for all CPUs,
1223          * even before we online them, so that we can use cpu_to_{node,mem}
1224          * early in boot, cf. smp_prepare_cpus().
1225          * _nocalls() + manual invocation is used because cpuhp is not yet
1226          * initialized for the boot CPU.
1227          */
1228         cpuhp_setup_state_nocalls(CPUHP_POWER_NUMA_PREPARE, "powerpc/numa:prepare",
1229                                   ppc_numa_cpu_prepare, ppc_numa_cpu_dead);
1230 }
1231
1232 static int __init early_numa(char *p)
1233 {
1234         if (!p)
1235                 return 0;
1236
1237         if (strstr(p, "off"))
1238                 numa_enabled = 0;
1239
1240         p = strstr(p, "fake=");
1241         if (p)
1242                 cmdline = p + strlen("fake=");
1243
1244         return 0;
1245 }
1246 early_param("numa", early_numa);
1247
1248 #ifdef CONFIG_MEMORY_HOTPLUG
1249 /*
1250  * Find the node associated with a hot added memory section for
1251  * memory represented in the device tree by the property
1252  * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory.
1253  */
1254 static int hot_add_drconf_scn_to_nid(unsigned long scn_addr)
1255 {
1256         struct drmem_lmb *lmb;
1257         unsigned long lmb_size;
1258         int nid = NUMA_NO_NODE;
1259
1260         lmb_size = drmem_lmb_size();
1261
1262         for_each_drmem_lmb(lmb) {
1263                 /* skip this block if it is reserved or not assigned to
1264                  * this partition */
1265                 if ((lmb->flags & DRCONF_MEM_RESERVED)
1266                     || !(lmb->flags & DRCONF_MEM_ASSIGNED))
1267                         continue;
1268
1269                 if ((scn_addr < lmb->base_addr)
1270                     || (scn_addr >= (lmb->base_addr + lmb_size)))
1271                         continue;
1272
1273                 nid = of_drconf_to_nid_single(lmb);
1274                 break;
1275         }
1276
1277         return nid;
1278 }
1279
1280 /*
1281  * Find the node associated with a hot added memory section for memory
1282  * represented in the device tree as a node (i.e. memory@XXXX) for
1283  * each memblock.
1284  */
1285 static int hot_add_node_scn_to_nid(unsigned long scn_addr)
1286 {
1287         struct device_node *memory;
1288         int nid = NUMA_NO_NODE;
1289
1290         for_each_node_by_type(memory, "memory") {
1291                 unsigned long start, size;
1292                 int ranges;
1293                 const __be32 *memcell_buf;
1294                 unsigned int len;
1295
1296                 memcell_buf = of_get_property(memory, "reg", &len);
1297                 if (!memcell_buf || len <= 0)
1298                         continue;
1299
1300                 /* ranges in cell */
1301                 ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
1302
1303                 while (ranges--) {
1304                         start = read_n_cells(n_mem_addr_cells, &memcell_buf);
1305                         size = read_n_cells(n_mem_size_cells, &memcell_buf);
1306
1307                         if ((scn_addr < start) || (scn_addr >= (start + size)))
1308                                 continue;
1309
1310                         nid = of_node_to_nid_single(memory);
1311                         break;
1312                 }
1313
1314                 if (nid >= 0)
1315                         break;
1316         }
1317
1318         of_node_put(memory);
1319
1320         return nid;
1321 }
1322
1323 /*
1324  * Find the node associated with a hot added memory section.  Section
1325  * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
1326  * sections are fully contained within a single MEMBLOCK.
1327  */
1328 int hot_add_scn_to_nid(unsigned long scn_addr)
1329 {
1330         struct device_node *memory = NULL;
1331         int nid;
1332
1333         if (!numa_enabled)
1334                 return first_online_node;
1335
1336         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
1337         if (memory) {
1338                 nid = hot_add_drconf_scn_to_nid(scn_addr);
1339                 of_node_put(memory);
1340         } else {
1341                 nid = hot_add_node_scn_to_nid(scn_addr);
1342         }
1343
1344         if (nid < 0 || !node_possible(nid))
1345                 nid = first_online_node;
1346
1347         return nid;
1348 }
1349
1350 static u64 hot_add_drconf_memory_max(void)
1351 {
1352         struct device_node *memory = NULL;
1353         struct device_node *dn = NULL;
1354         const __be64 *lrdr = NULL;
1355
1356         dn = of_find_node_by_path("/rtas");
1357         if (dn) {
1358                 lrdr = of_get_property(dn, "ibm,lrdr-capacity", NULL);
1359                 of_node_put(dn);
1360                 if (lrdr)
1361                         return be64_to_cpup(lrdr);
1362         }
1363
1364         memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
1365         if (memory) {
1366                 of_node_put(memory);
1367                 return drmem_lmb_memory_max();
1368         }
1369         return 0;
1370 }
1371
1372 /*
1373  * memory_hotplug_max - return max address of memory that may be added
1374  *
1375  * This is currently only used on systems that support drconfig memory
1376  * hotplug.
1377  */
1378 u64 memory_hotplug_max(void)
1379 {
1380         return max(hot_add_drconf_memory_max(), memblock_end_of_DRAM());
1381 }
1382 #endif /* CONFIG_MEMORY_HOTPLUG */
1383
1384 /* Virtual Processor Home Node (VPHN) support */
1385 #ifdef CONFIG_PPC_SPLPAR
1386 static int topology_inited;
1387
1388 /*
1389  * Retrieve the new associativity information for a virtual processor's
1390  * home node.
1391  */
1392 static long vphn_get_associativity(unsigned long cpu,
1393                                         __be32 *associativity)
1394 {
1395         long rc;
1396
1397         rc = hcall_vphn(get_hard_smp_processor_id(cpu),
1398                                 VPHN_FLAG_VCPU, associativity);
1399
1400         switch (rc) {
1401         case H_SUCCESS:
1402                 pr_debug("VPHN hcall succeeded. Reset polling...\n");
1403                 goto out;
1404
1405         case H_FUNCTION:
1406                 pr_err_ratelimited("VPHN unsupported. Disabling polling...\n");
1407                 break;
1408         case H_HARDWARE:
1409                 pr_err_ratelimited("hcall_vphn() experienced a hardware fault "
1410                         "preventing VPHN. Disabling polling...\n");
1411                 break;
1412         case H_PARAMETER:
1413                 pr_err_ratelimited("hcall_vphn() was passed an invalid parameter. "
1414                         "Disabling polling...\n");
1415                 break;
1416         default:
1417                 pr_err_ratelimited("hcall_vphn() returned %ld. Disabling polling...\n"
1418                         , rc);
1419                 break;
1420         }
1421 out:
1422         return rc;
1423 }
1424
1425 int find_and_online_cpu_nid(int cpu)
1426 {
1427         __be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
1428         int new_nid;
1429
1430         /* Use associativity from first thread for all siblings */
1431         if (vphn_get_associativity(cpu, associativity))
1432                 return cpu_to_node(cpu);
1433
1434         new_nid = associativity_to_nid(associativity);
1435         if (new_nid < 0 || !node_possible(new_nid))
1436                 new_nid = first_online_node;
1437
1438         if (!node_online(new_nid)) {
1439 #ifdef CONFIG_MEMORY_HOTPLUG
1440                 /*
1441                  * Need to ensure that NODE_DATA is initialized for a node from
1442                  * available memory (see memblock_alloc_try_nid). If unable to
1443                  * init the node, then default to nearest node that has memory
1444                  * installed. Skip onlining a node if the subsystems are not
1445                  * yet initialized.
1446                  */
1447                 if (!topology_inited || try_online_node(new_nid))
1448                         new_nid = first_online_node;
1449 #else
1450                 /*
1451                  * Default to using the nearest node that has memory installed.
1452                  * Otherwise, it would be necessary to patch the kernel MM code
1453                  * to deal with more memoryless-node error conditions.
1454                  */
1455                 new_nid = first_online_node;
1456 #endif
1457         }
1458
1459         pr_debug("%s:%d cpu %d nid %d\n", __func__, __LINE__, cpu, new_nid);
1460         return new_nid;
1461 }
1462
1463 int cpu_to_coregroup_id(int cpu)
1464 {
1465         __be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
1466         int index;
1467
1468         if (cpu < 0 || cpu > nr_cpu_ids)
1469                 return -1;
1470
1471         if (!coregroup_enabled)
1472                 goto out;
1473
1474         if (!firmware_has_feature(FW_FEATURE_VPHN))
1475                 goto out;
1476
1477         if (vphn_get_associativity(cpu, associativity))
1478                 goto out;
1479
1480         index = of_read_number(associativity, 1);
1481         if (index > primary_domain_index + 1)
1482                 return of_read_number(&associativity[index - 1], 1);
1483
1484 out:
1485         return cpu_to_core_id(cpu);
1486 }
1487
1488 static int topology_update_init(void)
1489 {
1490         topology_inited = 1;
1491         return 0;
1492 }
1493 device_initcall(topology_update_init);
1494 #endif /* CONFIG_PPC_SPLPAR */