arch/powerpc/boot/dts/mpc8568mds.dts

   1 /*
   2  * MPC8568E MDS Device Tree Source
   3  *
   4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   5  *
   6  * This program is free software; you can redistribute  it and/or modify it
   7  * under  the terms of  the GNU General  Public License as published by the
   8  * Free Software Foundation;  either version 2 of the  License, or (at your
   9  * option) any later version.
  10  */
  11
  12 /dts-v1/;
  13
  14 / {
  15         model = "MPC8568EMDS";
  16         compatible = "MPC8568EMDS", "MPC85xxMDS";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         aliases {
  21                 ethernet0 = &enet0;
  22                 ethernet1 = &enet1;
  23                 ethernet2 = &enet2;
  24                 ethernet3 = &enet3;
  25                 serial0 = &serial0;
  26                 serial1 = &serial1;
  27                 pci0 = &pci0;
  28                 pci1 = &pci1;
  29         };
  30
  31         cpus {
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34
  35                 PowerPC,8568@0 {
  36                         device_type = "cpu";
  37                         reg = <0x0>;
  38                         d-cache-line-size = <32>;       // 32 bytes
  39                         i-cache-line-size = <32>;       // 32 bytes
  40                         d-cache-size = <0x8000>;                // L1, 32K
  41                         i-cache-size = <0x8000>;                // L1, 32K
  42                         timebase-frequency = <0>;
  43                         bus-frequency = <0>;
  44                         clock-frequency = <0>;
  45                         next-level-cache = <&L2>;
  46                 };
  47         };
  48
  49         memory {
  50                 device_type = "memory";
  51                 reg = <0x0 0x10000000>;
  52         };
  53
  54         bcsr@f8000000 {
  55                 device_type = "board-control";
  56                 reg = <0xf8000000 0x8000>;
  57         };
  58
  59         soc8568@e0000000 {
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62                 device_type = "soc";
  63                 ranges = <0x0 0xe0000000 0x100000>;
  64                 reg = <0xe0000000 0x1000>;
  65                 bus-frequency = <0>;
  66
  67                 memory-controller@2000 {
  68                         compatible = "fsl,8568-memory-controller";
  69                         reg = <0x2000 0x1000>;
  70                         interrupt-parent = <&mpic>;
  71                         interrupts = <18 2>;
  72                 };
  73
  74                 L2: l2-cache-controller@20000 {
  75                         compatible = "fsl,8568-l2-cache-controller";
  76                         reg = <0x20000 0x1000>;
  77                         cache-line-size = <32>; // 32 bytes
  78                         cache-size = <0x80000>; // L2, 512K
  79                         interrupt-parent = <&mpic>;
  80                         interrupts = <16 2>;
  81                 };
  82
  83                 i2c@3000 {
  84                         #address-cells = <1>;
  85                         #size-cells = <0>;
  86                         cell-index = <0>;
  87                         compatible = "fsl-i2c";
  88                         reg = <0x3000 0x100>;
  89                         interrupts = <43 2>;
  90                         interrupt-parent = <&mpic>;
  91                         dfsrr;
  92
  93                         rtc@68 {
  94                                 compatible = "dallas,ds1374";
  95                                 reg = <0x68>;
  96                         };
  97                 };
  98
  99                 i2c@3100 {
 100                         #address-cells = <1>;
 101                         #size-cells = <0>;
 102                         cell-index = <1>;
 103                         compatible = "fsl-i2c";
 104                         reg = <0x3100 0x100>;
 105                         interrupts = <43 2>;
 106                         interrupt-parent = <&mpic>;
 107                         dfsrr;
 108                 };
 109
 110                 dma@21300 {
 111                         #address-cells = <1>;
 112                         #size-cells = <1>;
 113                         compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
 114                         reg = <0x21300 0x4>;
 115                         ranges = <0x0 0x21100 0x200>;
 116                         cell-index = <0>;
 117                         dma-channel@0 {
 118                                 compatible = "fsl,mpc8568-dma-channel",
 119                                                 "fsl,eloplus-dma-channel";
 120                                 reg = <0x0 0x80>;
 121                                 cell-index = <0>;
 122                                 interrupt-parent = <&mpic>;
 123                                 interrupts = <20 2>;
 124                         };
 125                         dma-channel@80 {
 126                                 compatible = "fsl,mpc8568-dma-channel",
 127                                                 "fsl,eloplus-dma-channel";
 128                                 reg = <0x80 0x80>;
 129                                 cell-index = <1>;
 130                                 interrupt-parent = <&mpic>;
 131                                 interrupts = <21 2>;
 132                         };
 133                         dma-channel@100 {
 134                                 compatible = "fsl,mpc8568-dma-channel",
 135                                                 "fsl,eloplus-dma-channel";
 136                                 reg = <0x100 0x80>;
 137                                 cell-index = <2>;
 138                                 interrupt-parent = <&mpic>;
 139                                 interrupts = <22 2>;
 140                         };
 141                         dma-channel@180 {
 142                                 compatible = "fsl,mpc8568-dma-channel",
 143                                                 "fsl,eloplus-dma-channel";
 144                                 reg = <0x180 0x80>;
 145                                 cell-index = <3>;
 146                                 interrupt-parent = <&mpic>;
 147                                 interrupts = <23 2>;
 148                         };
 149                 };
 150
 151                 mdio@24520 {
 152                         #address-cells = <1>;
 153                         #size-cells = <0>;
 154                         compatible = "fsl,gianfar-mdio";
 155                         reg = <0x24520 0x20>;
 156
 157                         phy0: ethernet-phy@7 {
 158                                 interrupt-parent = <&mpic>;
 159                                 interrupts = <1 1>;
 160                                 reg = <0x7>;
 161                                 device_type = "ethernet-phy";
 162                         };
 163                         phy1: ethernet-phy@1 {
 164                                 interrupt-parent = <&mpic>;
 165                                 interrupts = <2 1>;
 166                                 reg = <0x1>;
 167                                 device_type = "ethernet-phy";
 168                         };
 169                         phy2: ethernet-phy@2 {
 170                                 interrupt-parent = <&mpic>;
 171                                 interrupts = <1 1>;
 172                                 reg = <0x2>;
 173                                 device_type = "ethernet-phy";
 174                         };
 175                         phy3: ethernet-phy@3 {
 176                                 interrupt-parent = <&mpic>;
 177                                 interrupts = <2 1>;
 178                                 reg = <0x3>;
 179                                 device_type = "ethernet-phy";
 180                         };
 181                 };
 182
 183                 enet0: ethernet@24000 {
 184                         cell-index = <0>;
 185                         device_type = "network";
 186                         model = "eTSEC";
 187                         compatible = "gianfar";
 188                         reg = <0x24000 0x1000>;
 189                         local-mac-address = [ 00 00 00 00 00 00 ];
 190                         interrupts = <29 2 30 2 34 2>;
 191                         interrupt-parent = <&mpic>;
 192                         phy-handle = <&phy2>;
 193                 };
 194
 195                 enet1: ethernet@25000 {
 196                         cell-index = <1>;
 197                         device_type = "network";
 198                         model = "eTSEC";
 199                         compatible = "gianfar";
 200                         reg = <0x25000 0x1000>;
 201                         local-mac-address = [ 00 00 00 00 00 00 ];
 202                         interrupts = <35 2 36 2 40 2>;
 203                         interrupt-parent = <&mpic>;
 204                         phy-handle = <&phy3>;
 205                 };
 206
 207                 serial0: serial@4500 {
 208                         cell-index = <0>;
 209                         device_type = "serial";
 210                         compatible = "ns16550";
 211                         reg = <0x4500 0x100>;
 212                         clock-frequency = <0>;
 213                         interrupts = <42 2>;
 214                         interrupt-parent = <&mpic>;
 215                 };
 216
 217                 global-utilities@e0000 {        //global utilities block
 218                         compatible = "fsl,mpc8548-guts";
 219                         reg = <0xe0000 0x1000>;
 220                         fsl,has-rstcr;
 221                 };
 222
 223                 serial1: serial@4600 {
 224                         cell-index = <1>;
 225                         device_type = "serial";
 226                         compatible = "ns16550";
 227                         reg = <0x4600 0x100>;
 228                         clock-frequency = <0>;
 229                         interrupts = <42 2>;
 230                         interrupt-parent = <&mpic>;
 231                 };
 232
 233                 crypto@30000 {
 234                         device_type = "crypto";
 235                         model = "SEC2";
 236                         compatible = "talitos";
 237                         reg = <0x30000 0xf000>;
 238                         interrupts = <45 2>;
 239                         interrupt-parent = <&mpic>;
 240                         num-channels = <4>;
 241                         channel-fifo-len = <24>;
 242                         exec-units-mask = <0xfe>;
 243                         descriptor-types-mask = <0x12b0ebf>;
 244                 };
 245
 246                 mpic: pic@40000 {
 247                         interrupt-controller;
 248                         #address-cells = <0>;
 249                         #interrupt-cells = <2>;
 250                         reg = <0x40000 0x40000>;
 251                         compatible = "chrp,open-pic";
 252                         device_type = "open-pic";
 253                 };
 254
 255                 par_io@e0100 {
 256                         reg = <0xe0100 0x100>;
 257                         device_type = "par_io";
 258                         num-ports = <7>;
 259
 260                         pio1: ucc_pin@01 {
 261                                 pio-map = <
 262                         /* port  pin  dir  open_drain  assignment  has_irq */
 263                                         0x4  0xa  0x1  0x0  0x2  0x0    /* TxD0 */
 264                                         0x4  0x9  0x1  0x0  0x2  0x0    /* TxD1 */
 265                                         0x4  0x8  0x1  0x0  0x2  0x0    /* TxD2 */
 266                                         0x4  0x7  0x1  0x0  0x2  0x0    /* TxD3 */
 267                                         0x4  0x17  0x1  0x0  0x2  0x0   /* TxD4 */
 268                                         0x4  0x16  0x1  0x0  0x2  0x0   /* TxD5 */
 269                                         0x4  0x15  0x1  0x0  0x2  0x0   /* TxD6 */
 270                                         0x4  0x14  0x1  0x0  0x2  0x0   /* TxD7 */
 271                                         0x4  0xf  0x2  0x0  0x2  0x0    /* RxD0 */
 272                                         0x4  0xe  0x2  0x0  0x2  0x0    /* RxD1 */
 273                                         0x4  0xd  0x2  0x0  0x2  0x0    /* RxD2 */
 274                                         0x4  0xc  0x2  0x0  0x2  0x0    /* RxD3 */
 275                                         0x4  0x1d  0x2  0x0  0x2  0x0   /* RxD4 */
 276                                         0x4  0x1c  0x2  0x0  0x2  0x0   /* RxD5 */
 277                                         0x4  0x1b  0x2  0x0  0x2  0x0   /* RxD6 */
 278                                         0x4  0x1a  0x2  0x0  0x2  0x0   /* RxD7 */
 279                                         0x4  0xb  0x1  0x0  0x2  0x0    /* TX_EN */
 280                                         0x4  0x18  0x1  0x0  0x2  0x0   /* TX_ER */
 281                                         0x4  0x10  0x2  0x0  0x2  0x0   /* RX_DV */
 282                                         0x4  0x1e  0x2  0x0  0x2  0x0   /* RX_ER */
 283                                         0x4  0x11  0x2  0x0  0x2  0x0   /* RX_CLK */
 284                                         0x4  0x13  0x1  0x0  0x2  0x0   /* GTX_CLK */
 285                                         0x1  0x1f  0x2  0x0  0x3  0x0>; /* GTX125 */
 286                         };
 287
 288                         pio2: ucc_pin@02 {
 289                                 pio-map = <
 290                         /* port  pin  dir  open_drain  assignment  has_irq */
 291                                         0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
 292                                         0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
 293                                         0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
 294                                         0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
 295                                         0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
 296                                         0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
 297                                         0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
 298                                         0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
 299                                         0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
 300                                         0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
 301                                         0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
 302                                         0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
 303                                         0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
 304                                         0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
 305                                         0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
 306                                         0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
 307                                         0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
 308                                         0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
 309                                         0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
 310                                         0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
 311                                         0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
 312                                         0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
 313                                         0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
 314                                         0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
 315                                         0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 316                         };
 317                 };
 318         };
 319
 320         qe@e0080000 {
 321                 #address-cells = <1>;
 322                 #size-cells = <1>;
 323                 device_type = "qe";
 324                 compatible = "fsl,qe";
 325                 ranges = <0x0 0xe0080000 0x40000>;
 326                 reg = <0xe0080000 0x480>;
 327                 brg-frequency = <0>;
 328                 bus-frequency = <396000000>;
 329
 330                 muram@10000 {
 331                         #address-cells = <1>;
 332                         #size-cells = <1>;
 333                         compatible = "fsl,qe-muram", "fsl,cpm-muram";
 334                         ranges = <0x0 0x10000 0x10000>;
 335
 336                         data-only@0 {
 337                                 compatible = "fsl,qe-muram-data",
 338                                              "fsl,cpm-muram-data";
 339                                 reg = <0x0 0x10000>;
 340                         };
 341                 };
 342
 343                 spi@4c0 {
 344                         cell-index = <0>;
 345                         compatible = "fsl,spi";
 346                         reg = <0x4c0 0x40>;
 347                         interrupts = <2>;
 348                         interrupt-parent = <&qeic>;
 349                         mode = "cpu";
 350                 };
 351
 352                 spi@500 {
 353                         cell-index = <1>;
 354                         compatible = "fsl,spi";
 355                         reg = <0x500 0x40>;
 356                         interrupts = <1>;
 357                         interrupt-parent = <&qeic>;
 358                         mode = "cpu";
 359                 };
 360
 361                 enet2: ucc@2000 {
 362                         device_type = "network";
 363                         compatible = "ucc_geth";
 364                         cell-index = <1>;
 365                         reg = <0x2000 0x200>;
 366                         interrupts = <32>;
 367                         interrupt-parent = <&qeic>;
 368                         local-mac-address = [ 00 00 00 00 00 00 ];
 369                         rx-clock-name = "none";
 370                         tx-clock-name = "clk16";
 371                         pio-handle = <&pio1>;
 372                         phy-handle = <&phy0>;
 373                         phy-connection-type = "rgmii-id";
 374                 };
 375
 376                 enet3: ucc@3000 {
 377                         device_type = "network";
 378                         compatible = "ucc_geth";
 379                         cell-index = <2>;
 380                         reg = <0x3000 0x200>;
 381                         interrupts = <33>;
 382                         interrupt-parent = <&qeic>;
 383                         local-mac-address = [ 00 00 00 00 00 00 ];
 384                         rx-clock-name = "none";
 385                         tx-clock-name = "clk16";
 386                         pio-handle = <&pio2>;
 387                         phy-handle = <&phy1>;
 388                         phy-connection-type = "rgmii-id";
 389                 };
 390
 391                 mdio@2120 {
 392                         #address-cells = <1>;
 393                         #size-cells = <0>;
 394                         reg = <0x2120 0x18>;
 395                         compatible = "fsl,ucc-mdio";
 396
 397                         /* These are the same PHYs as on
 398                          * gianfar's MDIO bus */
 399                         qe_phy0: ethernet-phy@07 {
 400                                 interrupt-parent = <&mpic>;
 401                                 interrupts = <1 1>;
 402                                 reg = <0x7>;
 403                                 device_type = "ethernet-phy";
 404                         };
 405                         qe_phy1: ethernet-phy@01 {
 406                                 interrupt-parent = <&mpic>;
 407                                 interrupts = <2 1>;
 408                                 reg = <0x1>;
 409                                 device_type = "ethernet-phy";
 410                         };
 411                         qe_phy2: ethernet-phy@02 {
 412                                 interrupt-parent = <&mpic>;
 413                                 interrupts = <1 1>;
 414                                 reg = <0x2>;
 415                                 device_type = "ethernet-phy";
 416                         };
 417                         qe_phy3: ethernet-phy@03 {
 418                                 interrupt-parent = <&mpic>;
 419                                 interrupts = <2 1>;
 420                                 reg = <0x3>;
 421                                 device_type = "ethernet-phy";
 422                         };
 423                 };
 424
 425                 qeic: interrupt-controller@80 {
 426                         interrupt-controller;
 427                         compatible = "fsl,qe-ic";
 428                         #address-cells = <0>;
 429                         #interrupt-cells = <1>;
 430                         reg = <0x80 0x80>;
 431                         big-endian;
 432                         interrupts = <46 2 46 2>; //high:30 low:30
 433                         interrupt-parent = <&mpic>;
 434                 };
 435
 436         };
 437
 438         pci0: pci@e0008000 {
 439                 cell-index = <0>;
 440                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 441                 interrupt-map = <
 442                         /* IDSEL 0x12 AD18 */
 443                         0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
 444                         0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
 445                         0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
 446                         0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 447
 448                         /* IDSEL 0x13 AD19 */
 449                         0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
 450                         0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
 451                         0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
 452                         0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
 453
 454                 interrupt-parent = <&mpic>;
 455                 interrupts = <24 2>;
 456                 bus-range = <0 255>;
 457                 ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 458                           0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
 459                 clock-frequency = <66666666>;
 460                 #interrupt-cells = <1>;
 461                 #size-cells = <2>;
 462                 #address-cells = <3>;
 463                 reg = <0xe0008000 0x1000>;
 464                 compatible = "fsl,mpc8540-pci";
 465                 device_type = "pci";
 466         };
 467
 468         /* PCI Express */
 469         pci1: pcie@e000a000 {
 470                 cell-index = <2>;
 471                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 472                 interrupt-map = <
 473
 474                         /* IDSEL 0x0 (PEX) */
 475                         00000 0x0 0x0 0x1 &mpic 0x0 0x1
 476                         00000 0x0 0x0 0x2 &mpic 0x1 0x1
 477                         00000 0x0 0x0 0x3 &mpic 0x2 0x1
 478                         00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 479
 480                 interrupt-parent = <&mpic>;
 481                 interrupts = <26 2>;
 482                 bus-range = <0 255>;
 483                 ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 484                           0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
 485                 clock-frequency = <33333333>;
 486                 #interrupt-cells = <1>;
 487                 #size-cells = <2>;
 488                 #address-cells = <3>;
 489                 reg = <0xe000a000 0x1000>;
 490                 compatible = "fsl,mpc8548-pcie";
 491                 device_type = "pci";
 492                 pcie@0 {
 493                         reg = <0x0 0x0 0x0 0x0 0x0>;
 494                         #size-cells = <2>;
 495                         #address-cells = <3>;
 496                         device_type = "pci";
 497                         ranges = <0x2000000 0x0 0xa0000000
 498                                   0x2000000 0x0 0xa0000000
 499                                   0x0 0x10000000
 500
 501                                   0x1000000 0x0 0x0
 502                                   0x1000000 0x0 0x0
 503                                   0x0 0x800000>;
 504                 };
 505         };
 506 };