1 # SPDX-License-Identifier: GPL-2.0
2 source "arch/powerpc/platforms/Kconfig.cputype"
5 def_bool PPC64 && $(cc-option, -mabi=elfv2)
8 def_bool PPC64 && $(cc-option, -mcpu=power10 -mprefixed)
11 # Clang has a bug (https://github.com/llvm/llvm-project/issues/62372)
12 # where pcrel code is not generated if -msoft-float, -mno-altivec, or
13 # -mno-vsx options are also given. Without these options, fp/vec
14 # instructions are generated from regular kernel code. So Clang can't
16 def_bool PPC64 && CC_IS_GCC && $(cc-option, -mcpu=power10 -mpcrel)
34 config ARCH_MMAP_RND_BITS_MAX
35 # On Book3S 64, the default virtual address space for 64-bit processes
36 # is 2^47 (128TB). As a maximum, allow randomisation to consume up to
37 # 32T of address space (2^45), which should ensure a reasonable gap
38 # between bottom-up and top-down allocations for applications that
39 # consume "normal" amounts of address space. Book3S 64 only supports 64K
41 default 29 if PPC_BOOK3S_64 && PPC_64K_PAGES # 29 = 45 (32T) - 16 (64K)
42 default 33 if PPC_BOOK3S_64 # 33 = 45 (32T) - 12 (4K)
44 # On all other 64-bit platforms (currently only Book3E), the virtual
45 # address space is 2^46 (64TB). Allow randomisation to consume up to 16T
46 # of address space (2^44). Only 4K page sizes are supported.
47 default 32 if 64BIT # 32 = 44 (16T) - 12 (4K)
49 # For 32-bit, use the compat values, as they're the same.
50 default ARCH_MMAP_RND_COMPAT_BITS_MAX
52 config ARCH_MMAP_RND_BITS_MIN
53 # Allow randomisation to consume up to 1GB of address space (2^30).
54 default 14 if 64BIT && PPC_64K_PAGES # 14 = 30 (1GB) - 16 (64K)
55 default 18 if 64BIT # 18 = 30 (1GB) - 12 (4K)
57 # For 32-bit, use the compat values, as they're the same.
58 default ARCH_MMAP_RND_COMPAT_BITS_MIN
60 config ARCH_MMAP_RND_COMPAT_BITS_MAX
61 # Total virtual address space for 32-bit processes is 2^31 (2GB).
62 # Allow randomisation to consume up to 512MB of address space (2^29).
63 default 11 if PPC_256K_PAGES # 11 = 29 (512MB) - 18 (256K)
64 default 13 if PPC_64K_PAGES # 13 = 29 (512MB) - 16 (64K)
65 default 15 if PPC_16K_PAGES # 15 = 29 (512MB) - 14 (16K)
66 default 17 # 17 = 29 (512MB) - 12 (4K)
68 config ARCH_MMAP_RND_COMPAT_BITS_MIN
69 # Total virtual address space for 32-bit processes is 2^31 (2GB).
70 # Allow randomisation to consume up to 8MB of address space (2^23).
71 default 5 if PPC_256K_PAGES # 5 = 23 (8MB) - 18 (256K)
72 default 7 if PPC_64K_PAGES # 7 = 23 (8MB) - 16 (64K)
73 default 9 if PPC_16K_PAGES # 9 = 23 (8MB) - 14 (16K)
74 default 11 # 11 = 23 (8MB) - 12 (4K)
77 int "Number of virtual interrupt numbers"
81 This defines the number of virtual interrupt numbers the kernel
82 can manage. Virtual interrupt numbers are what you see in
83 /proc/interrupts. If you configure your system to have too few,
84 drivers will fail to load or worse - handle with care.
88 depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
93 depends on HARDLOCKUP_DETECTOR_ARCH
96 This is a placeholder when the powerpc hardlockup detector
97 watchdog is selected (arch/powerpc/kernel/watchdog.c). It is
98 selected via the generic lockup detector menu which is why we
99 have no standalone config option for it here.
101 config STACKTRACE_SUPPORT
105 config LOCKDEP_SUPPORT
109 config GENERIC_LOCKBREAK
112 depends on SMP && PREEMPTION && !PPC_QUEUED_SPINLOCKS
114 config GENERIC_HWEIGHT
122 # Please keep this list sorted alphabetically.
124 select ARCH_32BIT_OFF_T if PPC32
125 select ARCH_DISABLE_KASAN_INLINE if PPC_RADIX_MMU
126 select ARCH_DMA_DEFAULT_COHERENT if !NOT_COHERENT_CACHE
127 select ARCH_ENABLE_MEMORY_HOTPLUG
128 select ARCH_ENABLE_MEMORY_HOTREMOVE
129 select ARCH_HAS_COPY_MC if PPC64
130 select ARCH_HAS_CURRENT_STACK_POINTER
131 select ARCH_HAS_DEBUG_VIRTUAL
132 select ARCH_HAS_DEBUG_VM_PGTABLE
133 select ARCH_HAS_DEBUG_WX if STRICT_KERNEL_RWX
134 select ARCH_HAS_DEVMEM_IS_ALLOWED
135 select ARCH_HAS_DMA_MAP_DIRECT if PPC_PSERIES
136 select ARCH_HAS_FORTIFY_SOURCE
137 select ARCH_HAS_GCOV_PROFILE_ALL
138 select ARCH_HAS_HUGEPD if HUGETLB_PAGE
140 select ARCH_HAS_MEMBARRIER_CALLBACKS
141 select ARCH_HAS_MEMBARRIER_SYNC_CORE
142 select ARCH_HAS_MEMREMAP_COMPAT_ALIGN if PPC_64S_HASH_MMU
143 select ARCH_HAS_MMIOWB if PPC64
144 select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
145 select ARCH_HAS_PHYS_TO_DMA
146 select ARCH_HAS_PMEM_API
147 select ARCH_HAS_PTE_DEVMAP if PPC_BOOK3S_64
148 select ARCH_HAS_PTE_SPECIAL
149 select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE && PPC_BOOK3S_64
150 select ARCH_HAS_SET_MEMORY
151 select ARCH_HAS_STRICT_KERNEL_RWX if (PPC_BOOK3S || PPC_8xx || 40x) && !HIBERNATION
152 select ARCH_HAS_STRICT_KERNEL_RWX if PPC_85xx && !HIBERNATION && !RANDOMIZE_BASE
153 select ARCH_HAS_STRICT_MODULE_RWX if ARCH_HAS_STRICT_KERNEL_RWX
154 select ARCH_HAS_SYSCALL_WRAPPER if !SPU_BASE && !COMPAT
155 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
156 select ARCH_HAS_UACCESS_FLUSHCACHE
157 select ARCH_HAS_UBSAN_SANITIZE_ALL
158 select ARCH_HAVE_NMI_SAFE_CMPXCHG
159 select ARCH_KEEP_MEMBLOCK
160 select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE if PPC_RADIX_MMU
161 select ARCH_MIGHT_HAVE_PC_PARPORT
162 select ARCH_MIGHT_HAVE_PC_SERIO
163 select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
164 select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
165 select ARCH_SPLIT_ARG64 if PPC32
166 select ARCH_STACKWALK
167 select ARCH_SUPPORTS_ATOMIC_RMW
168 select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC_BOOK3S || PPC_8xx || 40x
169 select ARCH_USE_BUILTIN_BSWAP
170 select ARCH_USE_CMPXCHG_LOCKREF if PPC64
171 select ARCH_USE_MEMTEST
172 select ARCH_USE_QUEUED_RWLOCKS if PPC_QUEUED_SPINLOCKS
173 select ARCH_WANT_DEFAULT_BPF_JIT
174 select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
175 select ARCH_WANT_IPC_PARSE_VERSION
176 select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
177 select ARCH_WANT_LD_ORPHAN_WARN
178 select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP if PPC_RADIX_MMU
179 select ARCH_WANTS_MODULES_DATA_IN_VMALLOC if PPC_BOOK3S_32 || PPC_8xx
180 select ARCH_WEAK_RELEASE_ACQUIRE
182 select BUILDTIME_TABLE_SORT
183 select CLONE_BACKWARDS
184 select CPUMASK_OFFSTACK if NR_CPUS >= 8192
185 select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN
186 select DMA_OPS_BYPASS if PPC64
187 select DMA_OPS if PPC64
188 select DYNAMIC_FTRACE if FUNCTION_TRACER
189 select EDAC_ATOMIC_SCRUB
191 select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if ARCH_USING_PATCHABLE_FUNCTION_ENTRY
192 select FUNCTION_ALIGNMENT_4B
193 select GENERIC_ATOMIC64 if PPC32
194 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
195 select GENERIC_CMOS_UPDATE
196 select GENERIC_CPU_AUTOPROBE
197 select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
198 select GENERIC_EARLY_IOREMAP
199 select GENERIC_GETTIMEOFDAY
200 select GENERIC_IDLE_POLL_SETUP
201 select GENERIC_IOREMAP
202 select GENERIC_IRQ_SHOW
203 select GENERIC_IRQ_SHOW_LEVEL
204 select GENERIC_PCI_IOMAP if PCI
205 select GENERIC_PTDUMP
206 select GENERIC_SMP_IDLE_THREAD
207 select GENERIC_TIME_VSYSCALL
208 select GENERIC_VDSO_TIME_NS
209 select HAS_IOPORT if PCI
210 select HAVE_ARCH_AUDITSYSCALL
211 select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
212 select HAVE_ARCH_HUGE_VMAP if PPC_RADIX_MMU || PPC_8xx
213 select HAVE_ARCH_JUMP_LABEL
214 select HAVE_ARCH_JUMP_LABEL_RELATIVE
215 select HAVE_ARCH_KASAN if PPC32 && PPC_PAGE_SHIFT <= 14
216 select HAVE_ARCH_KASAN if PPC_RADIX_MMU
217 select HAVE_ARCH_KASAN if PPC_BOOK3E_64
218 select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
219 select HAVE_ARCH_KCSAN
220 select HAVE_ARCH_KFENCE if ARCH_SUPPORTS_DEBUG_PAGEALLOC
221 select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
222 select HAVE_ARCH_WITHIN_STACK_FRAMES
223 select HAVE_ARCH_KGDB
224 select HAVE_ARCH_MMAP_RND_BITS
225 select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
226 select HAVE_ARCH_NVRAM_OPS
227 select HAVE_ARCH_SECCOMP_FILTER
228 select HAVE_ARCH_TRACEHOOK
229 select HAVE_ASM_MODVERSIONS
230 select HAVE_CONTEXT_TRACKING_USER
231 select HAVE_C_RECORDMCOUNT
232 select HAVE_DEBUG_KMEMLEAK
233 select HAVE_DEBUG_STACKOVERFLOW
234 select HAVE_DYNAMIC_FTRACE
235 select HAVE_DYNAMIC_FTRACE_WITH_ARGS if ARCH_USING_PATCHABLE_FUNCTION_ENTRY || MPROFILE_KERNEL || PPC32
236 select HAVE_DYNAMIC_FTRACE_WITH_REGS if ARCH_USING_PATCHABLE_FUNCTION_ENTRY || MPROFILE_KERNEL || PPC32
238 select HAVE_EFFICIENT_UNALIGNED_ACCESS
240 select HAVE_FTRACE_MCOUNT_RECORD
241 select HAVE_FUNCTION_ARG_ACCESS_API
242 select HAVE_FUNCTION_DESCRIPTORS if PPC64_ELF_ABI_V1
243 select HAVE_FUNCTION_ERROR_INJECTION
244 select HAVE_FUNCTION_GRAPH_TRACER
245 select HAVE_FUNCTION_TRACER if PPC64 || (PPC32 && CC_IS_GCC)
246 select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC
247 select HAVE_GENERIC_VDSO
248 select HAVE_HARDLOCKUP_DETECTOR_ARCH if PPC_BOOK3S_64 && SMP
249 select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
250 select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
251 select HAVE_IOREMAP_PROT
252 select HAVE_IRQ_TIME_ACCOUNTING
253 select HAVE_KERNEL_GZIP
254 select HAVE_KERNEL_LZMA if DEFAULT_UIMAGE
255 select HAVE_KERNEL_LZO if DEFAULT_UIMAGE
256 select HAVE_KERNEL_XZ if PPC_BOOK3S || 44x
258 select HAVE_KPROBES_ON_FTRACE
259 select HAVE_KRETPROBES
260 select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if HAVE_OBJTOOL_MCOUNT && (!ARCH_USING_PATCHABLE_FUNCTION_ENTRY || (!CC_IS_GCC || GCC_VERSION >= 110100))
261 select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
262 select HAVE_MOD_ARCH_SPECIFIC
263 select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
264 select HAVE_OPTPROBES
265 select HAVE_OBJTOOL if ARCH_USING_PATCHABLE_FUNCTION_ENTRY || MPROFILE_KERNEL || PPC32
266 select HAVE_OBJTOOL_MCOUNT if HAVE_OBJTOOL
267 select HAVE_PERF_EVENTS
268 select HAVE_PERF_EVENTS_NMI if PPC64
269 select HAVE_PERF_REGS
270 select HAVE_PERF_USER_STACK_DUMP
271 select HAVE_REGS_AND_STACK_ACCESS_API
272 select HAVE_RELIABLE_STACKTRACE
274 select HAVE_SETUP_PER_CPU_AREA if PPC64
275 select HAVE_SOFTIRQ_ON_OWN_STACK
276 select HAVE_STACKPROTECTOR if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
277 select HAVE_STACKPROTECTOR if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
278 select HAVE_STATIC_CALL if PPC32
279 select HAVE_SYSCALL_TRACEPOINTS
280 select HAVE_VIRT_CPU_ACCOUNTING
281 select HAVE_VIRT_CPU_ACCOUNTING_GEN
282 select HOTPLUG_SMT if HOTPLUG_CPU
283 select SMT_NUM_THREADS_DYNAMIC
284 select HUGETLB_PAGE_SIZE_VARIABLE if PPC_BOOK3S_64 && HUGETLB_PAGE
285 select IOMMU_HELPER if PPC64
287 select IRQ_FORCED_THREADING
288 select KASAN_VMALLOC if KASAN && MODULES
289 select LOCK_MM_AND_FIND_VMA
290 select MMU_GATHER_PAGE_SIZE
291 select MMU_GATHER_RCU_TABLE_FREE
292 select MMU_GATHER_MERGE_VMAS
293 select MMU_LAZY_TLB_SHOOTDOWN if PPC_BOOK3S_64
294 select MODULES_USE_ELF_RELA
295 select NEED_DMA_MAP_STATE if PPC64 || NOT_COHERENT_CACHE
296 select NEED_PER_CPU_EMBED_FIRST_CHUNK if PPC64
297 select NEED_PER_CPU_PAGE_FIRST_CHUNK if PPC64
298 select NEED_SG_DMA_LENGTH
300 select OF_EARLY_FLATTREE
301 select OLD_SIGACTION if PPC32
302 select OLD_SIGSUSPEND
303 select PCI_DOMAINS if PCI
304 select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
305 select PCI_SYSCALL if PCI
306 select PPC_DAWR if PPC64
309 select STRICT_KERNEL_RWX if STRICT_MODULE_RWX
310 select SYSCTL_EXCEPTION_TRACE
311 select THREAD_INFO_IN_TASK
312 select TRACE_IRQFLAGS_SUPPORT
314 # Please keep this list sorted alphabetically.
317 config PPC_BARRIER_NOSPEC
320 depends on PPC_BOOK3S_64 || PPC_E500
322 config PPC_HAS_LBARX_LHARX
334 bool "Enable support for 32bit binaries"
336 depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
337 default y if !CPU_LITTLE_ENDIAN
338 select ARCH_WANT_OLD_COMPAT_IPC
339 select COMPAT_OLD_SIGACTION
341 config SCHED_OMIT_FRAME_POINTER
345 config ARCH_MAY_HAVE_PC_FDC
349 config PPC_UDBG_16550
352 config GENERIC_TBSYNC
354 default y if PPC32 && SMP
365 config GENERIC_BUG_RELATIVE_POINTERS
367 depends on GENERIC_BUG
369 config SYS_SUPPORTS_APM_EMULATION
370 default y if PMAC_APM_EMU
376 Used to allow a board to specify it wants an ePAPR compliant wrapper.
378 config DEFAULT_UIMAGE
381 Used to allow a board to specify it wants a uImage built by default
383 config ARCH_HIBERNATION_POSSIBLE
387 config ARCH_SUSPEND_POSSIBLE
389 depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
390 (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
393 config ARCH_SUSPEND_NONZERO_CPU
395 depends on PPC_POWERNV || PPC_PSERIES
397 config ARCH_HAS_ADD_PAGES
399 depends on ARCH_ENABLE_MEMORY_HOTPLUG
401 config PPC_DCR_NATIVE
409 depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
412 config PPC_PCI_OF_BUS_MAP
413 bool "Use pci_to_OF_bus_map (deprecated)"
415 depends on PPC_PMAC || PPC_CHRP
417 This option uses pci_to_OF_bus_map to map OF nodes to PCI devices, which
418 restricts the system to only having 256 PCI buses. On CHRP it also causes
419 the "pci-OF-bus-map" property to be created in the device tree.
423 config PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
425 depends on !PPC_PCI_OF_BUS_MAP
426 bool "Assign PCI bus numbers from zero individually for each PCI domain"
429 By default on PPC32 were PCI bus numbers unique across all PCI domains.
430 So system could have only 256 PCI buses independently of available
431 PCI domains. When this option is enabled then PCI bus numbers are
432 PCI domain dependent and each PCI controller on own domain can have
433 256 PCI buses, like it is on other Linux architectures.
435 config PPC_OF_PLATFORM_PCI
438 depends on PPC64 # not supported on 32 bits yet
440 config ARCH_SUPPORTS_UPROBES
443 config PPC_ADV_DEBUG_REGS
445 depends on 40x || BOOKE
448 config PPC_ADV_DEBUG_IACS
450 depends on PPC_ADV_DEBUG_REGS
454 config PPC_ADV_DEBUG_DACS
456 depends on PPC_ADV_DEBUG_REGS
459 config PPC_ADV_DEBUG_DVCS
461 depends on PPC_ADV_DEBUG_REGS
465 config PPC_ADV_DEBUG_DAC_RANGE
467 depends on PPC_ADV_DEBUG_REGS && 44x
473 config PGTABLE_LEVELS
478 source "arch/powerpc/sysdev/Kconfig"
479 source "arch/powerpc/platforms/Kconfig"
481 menu "Kernel options"
484 bool "High memory support"
488 source "kernel/Kconfig.hz"
490 config MATH_EMULATION
491 bool "Math emulation"
492 depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE || PPC_MICROWATT
495 Some PowerPC chips designed for embedded applications do not have
496 a floating-point unit and therefore do not implement the
497 floating-point instructions in the PowerPC instruction set. If you
498 say Y here, the kernel will include code to emulate a floating-point
499 unit, which will allow programs that use floating-point
502 This is also useful to emulate missing (optional) instructions
503 such as fsqrt on cores that do have an FPU but do not implement
504 them (such as Freescale BookE).
507 prompt "Math emulation options"
508 default MATH_EMULATION_FULL
509 depends on MATH_EMULATION
511 config MATH_EMULATION_FULL
512 bool "Emulate all the floating point instructions"
514 Select this option will enable the kernel to support to emulate
515 all the floating point instructions. If your SoC doesn't have
516 a FPU, you should select this.
518 config MATH_EMULATION_HW_UNIMPLEMENTED
519 bool "Just emulate the FPU unimplemented instructions"
521 Select this if you know there does have a hardware FPU on your
522 SoC, but some floating point instructions are not implemented by that.
526 config PPC_TRANSACTIONAL_MEM
527 bool "Transactional Memory support for POWERPC"
528 depends on PPC_BOOK3S_64
533 Support user-mode Transactional Memory on POWERPC.
536 bool "Ultravisor support"
537 depends on KVM_BOOK3S_HV_POSSIBLE
538 depends on DEVICE_PRIVATE
541 This option paravirtualizes the kernel to run in POWER platforms that
542 supports the Protected Execution Facility (PEF). On such platforms,
543 the ultravisor firmware runs at a privilege level above the
548 config LD_HEAD_STUB_CATCH
549 bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
552 Very large kernels can cause linker branch stubs to be generated by
553 code in head_64.S, which moves the head text sections out of their
554 specified location. This option can work around the problem.
558 config MPROFILE_KERNEL
559 depends on PPC64_ELF_ABI_V2 && FUNCTION_TRACER
560 def_bool $(success,$(srctree)/arch/powerpc/tools/gcc-check-mprofile-kernel.sh $(CC) -mlittle-endian) if CPU_LITTLE_ENDIAN
561 def_bool $(success,$(srctree)/arch/powerpc/tools/gcc-check-mprofile-kernel.sh $(CC) -mbig-endian) if CPU_BIG_ENDIAN
563 config ARCH_USING_PATCHABLE_FUNCTION_ENTRY
564 depends on FUNCTION_TRACER && (PPC32 || PPC64_ELF_ABI_V2)
565 depends on $(cc-option,-fpatchable-function-entry=2)
567 def_bool $(success,$(srctree)/arch/powerpc/tools/gcc-check-fpatchable-function-entry.sh $(CC) -mlittle-endian) if PPC64 && CPU_LITTLE_ENDIAN
568 def_bool $(success,$(srctree)/arch/powerpc/tools/gcc-check-fpatchable-function-entry.sh $(CC) -mbig-endian) if PPC64 && CPU_BIG_ENDIAN
571 bool "Support for enabling/disabling CPUs"
572 depends on SMP && (PPC_PSERIES || \
573 PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
575 Say Y here to be able to disable and re-enable individual
576 CPUs at runtime on SMP machines.
578 Say N if you are unsure.
580 config INTERRUPT_SANITIZE_REGISTERS
581 bool "Clear gprs on interrupt arrival"
582 depends on PPC64 && ARCH_HAS_SYSCALL_WRAPPER
583 default PPC_BOOK3E_64 || PPC_PSERIES || PPC_POWERNV
585 Reduce the influence of user register state on interrupt handlers and
586 syscalls through clearing user state from registers before handling
589 config PPC_QUEUED_SPINLOCKS
590 bool "Queued spinlocks" if EXPERT
592 default PPC_BOOK3S_64
594 Say Y here to use queued spinlocks which give better scalability and
595 fairness on large SMP and NUMA systems without harming single threaded
598 config ARCH_CPU_PROBE_RELEASE
600 depends on HOTPLUG_CPU
602 config PPC64_SUPPORTS_MEMORY_FAILURE
603 bool "Add support for memory hwpoison"
604 depends on PPC_BOOK3S_64
605 default "y" if PPC_POWERNV
606 select ARCH_SUPPORTS_MEMORY_FAILURE
608 config ARCH_SUPPORTS_KEXEC
609 def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)
611 config ARCH_SUPPORTS_KEXEC_FILE
614 config ARCH_SUPPORTS_KEXEC_PURGATORY
617 config ARCH_SELECTS_KEXEC_FILE
619 depends on KEXEC_FILE
621 select HAVE_IMA_KEXEC if IMA
623 config PPC64_BIG_ENDIAN_ELF_ABI_V2
624 # Option is available to BFD, but LLD does not support ELFv1 so this is
626 prompt "Build big-endian kernel using ELF ABI V2" if LD_IS_BFD && EXPERT
628 depends on PPC64 && CPU_BIG_ENDIAN
629 depends on CC_HAS_ELFV2
631 This builds the kernel image using the "Power Architecture 64-Bit ELF
632 V2 ABI Specification", which has a reduced stack overhead and faster
633 function calls. This internal kernel ABI option does not affect
634 userspace compatibility.
636 The V2 ABI is standard for 64-bit little-endian, but for big-endian
637 it is less well tested by kernel and toolchain. However some distros
638 build userspace this way, and it can produce a functioning kernel.
641 bool "Build a relocatable kernel"
642 depends on PPC64 || (FLATMEM && (44x || PPC_85xx))
643 select NONSTATIC_KERNEL
645 This builds a kernel image that is capable of running at the
646 location the kernel is loaded at. For ppc32, there is no any
647 alignment restrictions, and this feature is a superset of
648 DYNAMIC_MEMSTART and hence overrides it. For ppc64, we should use
649 16k-aligned base address. The kernel is linked as a
650 position-independent executable (PIE) and contains dynamic relocations
651 which are processed early in the bootup process.
653 One use is for the kexec on panic case where the recovery kernel
654 must live at a different physical address than the primary
657 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
658 it has been loaded at and the compile time physical addresses
659 CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
660 setting can still be useful to bootwrappers that need to know the
661 load address of the kernel (eg. u-boot/mkimage).
663 config RANDOMIZE_BASE
664 bool "Randomize the address of the kernel image"
665 depends on PPC_85xx && FLATMEM
666 depends on RELOCATABLE
668 Randomizes the virtual address at which the kernel image is
669 loaded, as a security feature that deters exploit attempts
670 relying on knowledge of the location of kernel internals.
674 config RELOCATABLE_TEST
675 bool "Test relocatable kernel"
676 depends on (PPC64 && RELOCATABLE)
678 This runs the relocatable kernel at the address it was initially
679 loaded at, which tends to be non-zero and therefore test the
682 config ARCH_SUPPORTS_CRASH_DUMP
683 def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
685 config ARCH_SELECTS_CRASH_DUMP
687 depends on CRASH_DUMP
688 select RELOCATABLE if PPC64 || 44x || PPC_85xx
691 bool "Firmware-assisted dump"
692 depends on PPC64 && (PPC_RTAS || PPC_POWERNV)
696 A robust mechanism to get reliable kernel crash dump with
697 assistance from firmware. This approach does not use kexec,
698 instead firmware assists in booting the capture kernel
699 while preserving memory contents. Firmware-assisted dump
700 is meant to be a kdump replacement offering robustness and
701 speed not possible without system firmware assistance.
703 If unsure, say "y". Only special kernels like petitboot may
704 need to say "N" here.
706 config PRESERVE_FA_DUMP
707 bool "Preserve Firmware-assisted dump"
708 depends on PPC64 && PPC_POWERNV && !FA_DUMP
710 On a kernel with FA_DUMP disabled, this option helps to preserve
711 crash data from a previously crash'ed kernel. Useful when the next
712 memory preserving kernel boot would process this crash data.
713 Petitboot kernel is the typical usecase for this option.
716 bool "Export OPAL memory as /sys/firmware/opal/core"
717 depends on PPC64 && PPC_POWERNV
719 This option uses the MPIPL support in firmware to provide an
720 ELF core of OPAL memory after a crash. The ELF core is exported
721 as /sys/firmware/opal/core file which is helpful in debugging
722 OPAL crashes using GDB.
725 bool "Distribute interrupts on all CPUs by default"
728 This option gives the kernel permission to distribute IRQs across
729 multiple CPUs. Saying N here will route all IRQs to the first
730 CPU. Generally saying Y is safe, although some problems have been
731 reported with SMP Power Macintoshes with this option enabled.
734 bool "NUMA Memory Allocation and Scheduler Support"
735 depends on PPC64 && SMP
736 default y if PPC_PSERIES || PPC_POWERNV
737 select USE_PERCPU_NUMA_NODE_ID
739 Enable NUMA (Non-Uniform Memory Access) support.
741 The kernel will try to allocate memory used by a CPU on the
742 local memory controller of the CPU and add some more
743 NUMA awareness to the kernel.
751 config HAVE_MEMORYLESS_NODES
755 config ARCH_SELECT_MEMORY_MODEL
759 config ARCH_FLATMEM_ENABLE
761 depends on (PPC64 && !NUMA) || PPC32
763 config ARCH_SPARSEMEM_ENABLE
766 select SPARSEMEM_VMEMMAP_ENABLE
768 config ARCH_SPARSEMEM_DEFAULT
770 depends on PPC_BOOK3S_64
772 config ILLEGAL_POINTER_VALUE
774 # This is roughly half way between the top of user space and the bottom
775 # of kernel space, which seems about as good as we can get.
776 default 0x5deadbeef0000000 if PPC64
779 config ARCH_MEMORY_PROBE
781 depends on MEMORY_HOTPLUG
785 default PPC_64K_PAGES if PPC_BOOK3S_64
788 Select the kernel logical page size. Increasing the page size
789 will reduce software overhead at each page boundary, allow
790 hardware prefetch mechanisms to be more effective, and allow
791 larger dma transfers increasing IO efficiency and reducing
792 overhead. However the utilization of memory will increase.
793 For example, each cached file will using a multiple of the
794 page size to hold its contents and the difference between the
795 end of file and the end of page is wasted.
797 Some dedicated systems, such as software raid serving with
798 accelerated calculations, have shown significant increases.
800 If you configure a 64 bit kernel for 64k pages but the
801 processor does not support them, then the kernel will simulate
802 them with 4k pages, loading them on demand, but with the
803 reduced software overhead and larger internal fragmentation.
804 For the 32 bit kernel, a large page option will not be offered
805 unless it is supported by the configured processor.
807 If unsure, choose 4K_PAGES.
811 select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
815 depends on 44x || PPC_8xx
819 depends on 44x || PPC_BOOK3S_64
820 select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
822 config PPC_256K_PAGES
823 bool "256k page size (Requires non-standard binutils settings)"
824 depends on 44x && !PPC_47x
826 Make the page size 256k.
828 The kernel will only be able to run applications that have been
829 compiled with '-zmax-page-size' set to 256K (the default is 64K) using
830 binutils later than 2.17.50.0.3, or by patching the ELF_MAXPAGESIZE
831 definition from 0x10000 to 0x40000 in older versions.
837 depends on PPC_4K_PAGES
839 config PAGE_SIZE_16KB
841 depends on PPC_16K_PAGES
843 config PAGE_SIZE_64KB
845 depends on PPC_64K_PAGES
847 config PAGE_SIZE_256KB
849 depends on PPC_256K_PAGES
851 config PPC_PAGE_SHIFT
853 default 18 if PPC_256K_PAGES
854 default 16 if PPC_64K_PAGES
855 default 14 if PPC_16K_PAGES
859 int "Thread shift" if EXPERT
861 default "15" if PPC_256K_PAGES
862 default "14" if PPC64
865 Used to define the stack size. The default is almost always what you
866 want. Only change this if you know what you are doing.
868 config DATA_SHIFT_BOOL
869 bool "Set custom data alignment"
870 depends on ADVANCED_OPTIONS
871 depends on STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE
872 depends on PPC_BOOK3S_32 || (PPC_8xx && !PIN_TLB_DATA && !STRICT_KERNEL_RWX) || \
875 This option allows you to set the kernel data alignment. When
876 RAM is mapped by blocks, the alignment needs to fit the size and
877 number of possible blocks. The default should be OK for most configs.
879 Say N here unless you know what you are doing.
882 int "Data shift" if DATA_SHIFT_BOOL
883 default 24 if STRICT_KERNEL_RWX && PPC64
884 range 17 28 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
885 range 19 23 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
886 range 20 24 if (STRICT_KERNEL_RWX || DEBUG_PAGEALLOC || KFENCE) && PPC_85xx
887 default 22 if STRICT_KERNEL_RWX && PPC_BOOK3S_32
888 default 18 if (DEBUG_PAGEALLOC || KFENCE) && PPC_BOOK3S_32
889 default 23 if STRICT_KERNEL_RWX && PPC_8xx
890 default 23 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx && PIN_TLB_DATA
891 default 19 if (DEBUG_PAGEALLOC || KFENCE) && PPC_8xx
892 default 24 if STRICT_KERNEL_RWX && PPC_85xx
893 default PPC_PAGE_SHIFT
895 On Book3S 32 (603+), DBATs are used to map kernel text and rodata RO.
896 Smaller is the alignment, greater is the number of necessary DBATs.
898 On 8xx, large pages (512kb or 8M) are used to map kernel linear
899 memory. Aligning to 8M reduces TLB misses as only 8M pages are used
900 in that case. If PIN_TLB is selected, it must be aligned to 8M as
901 8M pages will be pinned.
903 config ARCH_FORCE_MAX_ORDER
904 int "Order of maximal physically contiguous allocations"
905 range 7 8 if PPC64 && PPC_64K_PAGES
906 default "8" if PPC64 && PPC_64K_PAGES
907 range 12 12 if PPC64 && !PPC_64K_PAGES
908 default "12" if PPC64 && !PPC_64K_PAGES
909 range 8 10 if PPC32 && PPC_16K_PAGES
910 default "8" if PPC32 && PPC_16K_PAGES
911 range 6 10 if PPC32 && PPC_64K_PAGES
912 default "6" if PPC32 && PPC_64K_PAGES
913 range 4 10 if PPC32 && PPC_256K_PAGES
914 default "4" if PPC32 && PPC_256K_PAGES
918 The kernel page allocator limits the size of maximal physically
919 contiguous allocations. The limit is called MAX_PAGE_ORDER and it
920 defines the maximal power of two of number of pages that can be
921 allocated as a single contiguous block. This option allows
922 overriding the default setting when ability to allocate very
923 large blocks of physically contiguous memory is required.
925 The page size is not necessarily 4KB. For example, on 64-bit
926 systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
927 this in mind when choosing a value for this option.
929 Don't change if unsure.
931 config PPC_SUBPAGE_PROT
932 bool "Support setting protections for 4k subpages (subpage_prot syscall)"
934 depends on PPC_64S_HASH_MMU && PPC_64K_PAGES
936 This option adds support for system call to allow user programs
937 to set access permissions (read/write, readonly, or no access)
938 on the 4k subpages of each 64k page.
940 If unsure, say N here.
942 config PPC_PROT_SAO_LPAR
943 bool "Support PROT_SAO mappings in LPARs"
944 depends on PPC_BOOK3S_64
946 This option adds support for PROT_SAO mappings from userspace
947 inside LPARs on supported CPUs.
949 This may cause issues when performing guest migration from
950 a CPU that supports SAO to one that does not.
952 If unsure, say N here.
954 config PPC_COPRO_BASE
958 bool "SMT (Hyperthreading) scheduler support"
959 depends on PPC64 && SMP
961 SMT scheduler support improves the CPU scheduler's decision making
962 when dealing with POWER5 cpus at a cost of slightly increased
963 overhead in some places. If unsure say N here.
965 config PPC_DENORMALISATION
966 bool "PowerPC denormalisation exception handling"
967 depends on PPC_BOOK3S_64
968 default "y" if PPC_POWERNV
970 Add support for handling denormalisation of single precision
971 values. Useful for bare metal only. If unsure say Y here.
974 string "Initial kernel command string"
977 On some platforms, there is currently no way for the boot loader to
978 pass arguments to the kernel. For these platforms, you can supply
979 some command-line options at build time by entering them here. In
980 most cases you will need to specify the root device here.
983 prompt "Kernel command line type" if CMDLINE != ""
984 default CMDLINE_FROM_BOOTLOADER
986 config CMDLINE_FROM_BOOTLOADER
987 bool "Use bootloader kernel arguments if available"
989 Uses the command-line options passed by the boot loader. If
990 the boot loader doesn't provide any, the default kernel command
991 string provided in CMDLINE will be used.
993 config CMDLINE_EXTEND
994 bool "Extend bootloader kernel arguments"
996 The command-line arguments provided by the boot loader will be
997 appended to the default kernel command string.
1000 bool "Always use the default kernel command string"
1002 Always use the default kernel command string, even if the boot
1003 loader passes other arguments to the kernel.
1004 This is useful if you cannot or don't want to change the
1005 command-line options your boot loader passes to the kernel.
1009 config EXTRA_TARGETS
1010 string "Additional default image types"
1012 List additional targets to be built by the bootwrapper here (separated
1013 by spaces). This is useful for targets that depend of device tree
1014 files in the .dts directory.
1016 Targets in this list will be build as part of the default build
1017 target, or when the user does a 'make zImage' or a
1018 'make zImage.initrd'.
1020 If unsure, leave blank
1022 config ARCH_WANTS_FREEZER_CONTROL
1026 source "kernel/power/Kconfig"
1029 prompt "PowerPC Memory Protection Keys"
1031 depends on PPC_BOOK3S_64
1032 depends on PPC_64S_HASH_MMU
1033 select ARCH_USES_HIGH_VMA_FLAGS
1034 select ARCH_HAS_PKEYS
1036 Memory Protection Keys provides a mechanism for enforcing
1037 page-based protections, but without requiring modification of the
1038 page tables when an application changes protection domains.
1040 For details, see Documentation/core-api/protection-keys.rst
1044 config PPC_SECURE_BOOT
1045 prompt "Enable secure boot support"
1047 depends on PPC_POWERNV || PPC_PSERIES
1048 depends on IMA_ARCH_POLICY
1049 imply IMA_SECURE_AND_OR_TRUSTED_BOOT
1050 select PSERIES_PLPKS if PPC_PSERIES
1052 Systems with firmware secure boot enabled need to define security
1053 policies to extend secure boot to the OS. This config allows a user
1054 to enable OS secure boot on systems that have firmware support for
1055 it. If in doubt say N.
1057 config PPC_SECVAR_SYSFS
1058 bool "Enable sysfs interface for POWER secure variables"
1060 depends on PPC_SECURE_BOOT
1063 POWER secure variables are managed and controlled by firmware.
1064 These variables are exposed to userspace via sysfs to enable
1065 read/write operations on these variables. Say Y if you have
1066 secure boot enabled and want to expose variables to userspace.
1077 bool "Support for ISA-bus hardware"
1081 Find out whether you have ISA slots on your motherboard. ISA is the
1082 name of a bus system, i.e. the way the CPU talks to the other stuff
1083 inside your box. If you have an Apple machine, say N here; if you
1084 have an IBM RS/6000 or pSeries machine, say Y. If you have an
1085 embedded board, consult your board documentation.
1087 config GENERIC_ISA_DMA
1089 depends on ISA_DMA_API
1092 config PPC_INDIRECT_PCI
1095 default y if 40x || 44x
1105 select ARCH_HAS_DMA_SET_MASK
1106 select PPC_INDIRECT_PCI
1112 depends on SUSPEND && (PPC_85xx || PPC_86xx)
1114 Freescale MPC85xx/MPC86xx power management controller support
1115 (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
1120 depends on SUSPEND && (44x || 40x)
1122 PPC4xx Clock Power Management (CPM) support (suspend/resume).
1123 It also enables support for two different idle states (idle-wait
1130 bool "Freescale Local Bus support"
1132 Enables reporting of errors from the Freescale local bus
1133 controller. Also contains some common code used by
1134 drivers for specific local bus peripherals.
1138 depends on PPC_83xx || QUICC_ENGINE || CPM2
1140 Freescale General-purpose Timers support
1143 bool "Freescale Embedded SRIO Controller support"
1144 depends on RAPIDIO = y && HAVE_RAPIDIO
1147 Include support for RapidIO controller on Freescale embedded
1148 processors (MPC8548, MPC8641, etc).
1152 config NONSTATIC_KERNEL
1155 menu "Advanced setup"
1158 config ADVANCED_OPTIONS
1159 bool "Prompt for advanced kernel configuration options"
1161 This option will enable prompting for a variety of advanced kernel
1162 configuration options. These options can cause the kernel to not
1163 work if they are set incorrectly, but can be used to optimize certain
1164 aspects of kernel memory management.
1166 Unless you know what you are doing, say N here.
1168 comment "Default settings for advanced configuration options are used"
1169 depends on !ADVANCED_OPTIONS
1171 config LOWMEM_SIZE_BOOL
1172 bool "Set maximum low memory"
1173 depends on ADVANCED_OPTIONS
1175 This option allows you to set the maximum amount of memory which
1176 will be used as "low memory", that is, memory which the kernel can
1177 access directly, without having to set up a kernel virtual mapping.
1178 This can be useful in optimizing the layout of kernel virtual
1181 Say N here unless you know what you are doing.
1184 hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
1185 default "0x30000000"
1187 config LOWMEM_CAM_NUM_BOOL
1188 bool "Set number of CAMs to use to map low memory"
1189 depends on ADVANCED_OPTIONS && PPC_85xx
1191 This option allows you to set the maximum number of CAM slots that
1192 will be used to map low memory. There are a limited number of slots
1193 available and even more limited number that will fit in the L1 MMU.
1194 However, using more entries will allow mapping more low memory. This
1195 can be useful in optimizing the layout of kernel virtual memory.
1197 Say N here unless you know what you are doing.
1199 config LOWMEM_CAM_NUM
1201 int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
1202 default 3 if !STRICT_KERNEL_RWX
1203 default 9 if DATA_SHIFT >= 24
1204 default 12 if DATA_SHIFT >= 22
1207 config DYNAMIC_MEMSTART
1208 bool "Enable page aligned dynamic load address for kernel"
1209 depends on ADVANCED_OPTIONS && FLATMEM && (PPC_85xx || 44x)
1210 select NONSTATIC_KERNEL
1212 This option enables the kernel to be loaded at any page aligned
1213 physical address. The kernel creates a mapping from KERNELBASE to
1214 the address where the kernel is loaded. The page size here implies
1215 the TLB page size of the mapping for kernel on the particular platform.
1216 Please refer to the init code for finding the TLB page size.
1218 DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
1219 kernel image, where the only restriction is the page aligned kernel
1220 load address. When this option is enabled, the compile time physical
1221 address CONFIG_PHYSICAL_START is ignored.
1223 This option is overridden by CONFIG_RELOCATABLE
1225 config PAGE_OFFSET_BOOL
1226 bool "Set custom page offset address"
1227 depends on ADVANCED_OPTIONS
1229 This option allows you to set the kernel virtual address at which
1230 the kernel will map low memory. This can be useful in optimizing
1231 the virtual memory layout of the system.
1233 Say N here unless you know what you are doing.
1236 hex "Virtual address of memory base" if PAGE_OFFSET_BOOL
1237 default "0xc0000000"
1239 config KERNEL_START_BOOL
1240 bool "Set custom kernel base address"
1241 depends on ADVANCED_OPTIONS
1243 This option allows you to set the kernel virtual address at which
1244 the kernel will be loaded. Normally this should match PAGE_OFFSET
1245 however there are times (like kdump) that one might not want them
1248 Say N here unless you know what you are doing.
1251 hex "Virtual address of kernel base" if KERNEL_START_BOOL
1252 default PAGE_OFFSET if PAGE_OFFSET_BOOL
1253 default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
1254 default "0xc0000000"
1256 config PHYSICAL_START_BOOL
1257 bool "Set physical address where the kernel is loaded"
1258 depends on ADVANCED_OPTIONS && FLATMEM && PPC_85xx
1260 This gives the physical address where the kernel is loaded.
1262 Say N here unless you know what you are doing.
1264 config PHYSICAL_START
1265 hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
1266 default "0x02000000" if PPC_BOOK3S && CRASH_DUMP && !NONSTATIC_KERNEL
1267 default "0x00000000"
1269 config PHYSICAL_ALIGN
1271 default "0x04000000" if PPC_85xx
1273 This value puts the alignment restrictions on physical address
1274 where kernel is loaded and run from. Kernel is compiled for an
1275 address which meets above alignment restriction.
1277 config TASK_SIZE_BOOL
1278 bool "Set custom user task size"
1279 depends on ADVANCED_OPTIONS
1281 This option allows you to set the amount of virtual address space
1282 allocated to user tasks. This can be useful in optimizing the
1283 virtual memory layout of the system.
1285 Say N here unless you know what you are doing.
1288 hex "Size of user task space" if TASK_SIZE_BOOL
1289 default "0x80000000" if PPC_8xx
1290 default "0xb0000000" if PPC_BOOK3S_32
1291 default "0xc0000000"
1295 # This value must have zeroes in the bottom 60 bits otherwise lots will break
1298 default "0xc000000000000000"
1301 default "0xc000000000000000"
1302 config PHYSICAL_START
1304 default "0x00000000"
1307 config PPC_LIB_RHEAP
1310 source "arch/powerpc/kvm/Kconfig"
1312 source "kernel/livepatch/Kconfig"