6 Select this from your board if the board must use a legacy, non-UHI,
7 boot protocol. This will cause the kernel to scan through the list of
8 supported machines calling their detect functions in turn if the
9 kernel is booted without being provided with an FDT via the UHI
15 Select this from your board if the board uses the YAMON bootloader
16 and you wish to include code which helps translate various
17 YAMON-provided environment variables into a device tree properties.
19 comment "Legacy (non-UHI/non-FIT) Boards"
21 config LEGACY_BOARD_SEAD3
22 bool "Support MIPS SEAD-3 boards"
26 Enable this to include support for booting on MIPS SEAD-3 FPGA-based
27 development boards, which boot using a legacy boot protocol.
29 comment "FIT/UHI Boards"
31 config FIT_IMAGE_FDT_BOSTON
32 bool "Include FDT for MIPS Boston boards"
34 Enable this to include the FDT for the MIPS Boston development board
35 from Imagination Technologies in the FIT kernel image. You should
36 enable this if you wish to boot on a MIPS Boston board, as it is
37 expected by the bootloader.