Pull sony-2.6.24 into release branch
[sfrench/cifs-2.6.git] / arch / i386 / kernel / cpu / cpufreq / longhaul.c
1 /*
2  *  (C) 2001-2004  Dave Jones. <davej@codemonkey.org.uk>
3  *  (C) 2002  Padraig Brady. <padraig@antefacto.com>
4  *
5  *  Licensed under the terms of the GNU GPL License version 2.
6  *  Based upon datasheets & sample CPUs kindly provided by VIA.
7  *
8  *  VIA have currently 3 different versions of Longhaul.
9  *  Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
10  *   It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
11  *  Version 2 of longhaul is backward compatible with v1, but adds
12  *   LONGHAUL MSR for purpose of both frequency and voltage scaling.
13  *   Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C).
14  *  Version 3 of longhaul got renamed to Powersaver and redesigned
15  *   to use only the POWERSAVER MSR at 0x110a.
16  *   It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
17  *   It's pretty much the same feature wise to longhaul v2, though
18  *   there is provision for scaling FSB too, but this doesn't work
19  *   too well in practice so we don't even try to use this.
20  *
21  *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
22  */
23
24 #include <linux/kernel.h>
25 #include <linux/module.h>
26 #include <linux/moduleparam.h>
27 #include <linux/init.h>
28 #include <linux/cpufreq.h>
29 #include <linux/pci.h>
30 #include <linux/slab.h>
31 #include <linux/string.h>
32 #include <linux/delay.h>
33
34 #include <asm/msr.h>
35 #include <asm/timex.h>
36 #include <asm/io.h>
37 #include <asm/acpi.h>
38 #include <linux/acpi.h>
39 #include <acpi/processor.h>
40
41 #include "longhaul.h"
42
43 #define PFX "longhaul: "
44
45 #define TYPE_LONGHAUL_V1        1
46 #define TYPE_LONGHAUL_V2        2
47 #define TYPE_POWERSAVER         3
48
49 #define CPU_SAMUEL      1
50 #define CPU_SAMUEL2     2
51 #define CPU_EZRA        3
52 #define CPU_EZRA_T      4
53 #define CPU_NEHEMIAH    5
54 #define CPU_NEHEMIAH_C  6
55
56 /* Flags */
57 #define USE_ACPI_C3             (1 << 1)
58 #define USE_NORTHBRIDGE         (1 << 2)
59
60 static int cpu_model;
61 static unsigned int numscales=16;
62 static unsigned int fsb;
63
64 static const struct mV_pos *vrm_mV_table;
65 static const unsigned char *mV_vrm_table;
66
67 static unsigned int highest_speed, lowest_speed; /* kHz */
68 static unsigned int minmult, maxmult;
69 static int can_scale_voltage;
70 static struct acpi_processor *pr = NULL;
71 static struct acpi_processor_cx *cx = NULL;
72 static u32 acpi_regs_addr;
73 static u8 longhaul_flags;
74 static unsigned int longhaul_index;
75
76 /* Module parameters */
77 static int scale_voltage;
78 static int disable_acpi_c3;
79 static int revid_errata;
80
81 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
82
83
84 /* Clock ratios multiplied by 10 */
85 static int clock_ratio[32];
86 static int eblcr_table[32];
87 static int longhaul_version;
88 static struct cpufreq_frequency_table *longhaul_table;
89
90 #ifdef CONFIG_CPU_FREQ_DEBUG
91 static char speedbuffer[8];
92
93 static char *print_speed(int speed)
94 {
95         if (speed < 1000) {
96                 snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
97                 return speedbuffer;
98         }
99
100         if (speed%1000 == 0)
101                 snprintf(speedbuffer, sizeof(speedbuffer),
102                         "%dGHz", speed/1000);
103         else
104                 snprintf(speedbuffer, sizeof(speedbuffer),
105                         "%d.%dGHz", speed/1000, (speed%1000)/100);
106
107         return speedbuffer;
108 }
109 #endif
110
111
112 static unsigned int calc_speed(int mult)
113 {
114         int khz;
115         khz = (mult/10)*fsb;
116         if (mult%10)
117                 khz += fsb/2;
118         khz *= 1000;
119         return khz;
120 }
121
122
123 static int longhaul_get_cpu_mult(void)
124 {
125         unsigned long invalue=0,lo, hi;
126
127         rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
128         invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
129         if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
130                 if (lo & (1<<27))
131                         invalue+=16;
132         }
133         return eblcr_table[invalue];
134 }
135
136 /* For processor with BCR2 MSR */
137
138 static void do_longhaul1(unsigned int clock_ratio_index)
139 {
140         union msr_bcr2 bcr2;
141
142         rdmsrl(MSR_VIA_BCR2, bcr2.val);
143         /* Enable software clock multiplier */
144         bcr2.bits.ESOFTBF = 1;
145         bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff;
146
147         /* Sync to timer tick */
148         safe_halt();
149         /* Change frequency on next halt or sleep */
150         wrmsrl(MSR_VIA_BCR2, bcr2.val);
151         /* Invoke transition */
152         ACPI_FLUSH_CPU_CACHE();
153         halt();
154
155         /* Disable software clock multiplier */
156         local_irq_disable();
157         rdmsrl(MSR_VIA_BCR2, bcr2.val);
158         bcr2.bits.ESOFTBF = 0;
159         wrmsrl(MSR_VIA_BCR2, bcr2.val);
160 }
161
162 /* For processor with Longhaul MSR */
163
164 static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
165                           unsigned int dir)
166 {
167         union msr_longhaul longhaul;
168         u32 t;
169
170         rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
171         /* Setup new frequency */
172         if (!revid_errata)
173                 longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
174         else
175                 longhaul.bits.RevisionKey = 0;
176         longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
177         longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
178         /* Setup new voltage */
179         if (can_scale_voltage)
180                 longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f;
181         /* Sync to timer tick */
182         safe_halt();
183         /* Raise voltage if necessary */
184         if (can_scale_voltage && dir) {
185                 longhaul.bits.EnableSoftVID = 1;
186                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
187                 /* Change voltage */
188                 if (!cx_address) {
189                         ACPI_FLUSH_CPU_CACHE();
190                         halt();
191                 } else {
192                         ACPI_FLUSH_CPU_CACHE();
193                         /* Invoke C3 */
194                         inb(cx_address);
195                         /* Dummy op - must do something useless after P_LVL3
196                          * read */
197                         t = inl(acpi_gbl_FADT.xpm_timer_block.address);
198                 }
199                 longhaul.bits.EnableSoftVID = 0;
200                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
201         }
202
203         /* Change frequency on next halt or sleep */
204         longhaul.bits.EnableSoftBusRatio = 1;
205         wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
206         if (!cx_address) {
207                 ACPI_FLUSH_CPU_CACHE();
208                 halt();
209         } else {
210                 ACPI_FLUSH_CPU_CACHE();
211                 /* Invoke C3 */
212                 inb(cx_address);
213                 /* Dummy op - must do something useless after P_LVL3 read */
214                 t = inl(acpi_gbl_FADT.xpm_timer_block.address);
215         }
216         /* Disable bus ratio bit */
217         longhaul.bits.EnableSoftBusRatio = 0;
218         wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
219
220         /* Reduce voltage if necessary */
221         if (can_scale_voltage && !dir) {
222                 longhaul.bits.EnableSoftVID = 1;
223                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
224                 /* Change voltage */
225                 if (!cx_address) {
226                         ACPI_FLUSH_CPU_CACHE();
227                         halt();
228                 } else {
229                         ACPI_FLUSH_CPU_CACHE();
230                         /* Invoke C3 */
231                         inb(cx_address);
232                         /* Dummy op - must do something useless after P_LVL3
233                          * read */
234                         t = inl(acpi_gbl_FADT.xpm_timer_block.address);
235                 }
236                 longhaul.bits.EnableSoftVID = 0;
237                 wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
238         }
239 }
240
241 /**
242  * longhaul_set_cpu_frequency()
243  * @clock_ratio_index : bitpattern of the new multiplier.
244  *
245  * Sets a new clock ratio.
246  */
247
248 static void longhaul_setstate(unsigned int table_index)
249 {
250         unsigned int clock_ratio_index;
251         int speed, mult;
252         struct cpufreq_freqs freqs;
253         unsigned long flags;
254         unsigned int pic1_mask, pic2_mask;
255         u16 bm_status = 0;
256         u32 bm_timeout = 1000;
257         unsigned int dir = 0;
258
259         clock_ratio_index = longhaul_table[table_index].index;
260         /* Safety precautions */
261         mult = clock_ratio[clock_ratio_index & 0x1f];
262         if (mult == -1)
263                 return;
264         speed = calc_speed(mult);
265         if ((speed > highest_speed) || (speed < lowest_speed))
266                 return;
267         /* Voltage transition before frequency transition? */
268         if (can_scale_voltage && longhaul_index < table_index)
269                 dir = 1;
270
271         freqs.old = calc_speed(longhaul_get_cpu_mult());
272         freqs.new = speed;
273         freqs.cpu = 0; /* longhaul.c is UP only driver */
274
275         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
276
277         dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
278                         fsb, mult/10, mult%10, print_speed(speed/1000));
279 retry_loop:
280         preempt_disable();
281         local_irq_save(flags);
282
283         pic2_mask = inb(0xA1);
284         pic1_mask = inb(0x21);  /* works on C3. save mask. */
285         outb(0xFF,0xA1);        /* Overkill */
286         outb(0xFE,0x21);        /* TMR0 only */
287
288         /* Wait while PCI bus is busy. */
289         if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
290             || ((pr != NULL) && pr->flags.bm_control))) {
291                 bm_status = inw(acpi_regs_addr);
292                 bm_status &= 1 << 4;
293                 while (bm_status && bm_timeout) {
294                         outw(1 << 4, acpi_regs_addr);
295                         bm_timeout--;
296                         bm_status = inw(acpi_regs_addr);
297                         bm_status &= 1 << 4;
298                 }
299         }
300
301         if (longhaul_flags & USE_NORTHBRIDGE) {
302                 /* Disable AGP and PCI arbiters */
303                 outb(3, 0x22);
304         } else if ((pr != NULL) && pr->flags.bm_control) {
305                 /* Disable bus master arbitration */
306                 acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
307         }
308         switch (longhaul_version) {
309
310         /*
311          * Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
312          * Software controlled multipliers only.
313          */
314         case TYPE_LONGHAUL_V1:
315                 do_longhaul1(clock_ratio_index);
316                 break;
317
318         /*
319          * Longhaul v2 appears in Samuel2 Steppings 1->7 [C5B] and Ezra [C5C]
320          *
321          * Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
322          * Nehemiah can do FSB scaling too, but this has never been proven
323          * to work in practice.
324          */
325         case TYPE_LONGHAUL_V2:
326         case TYPE_POWERSAVER:
327                 if (longhaul_flags & USE_ACPI_C3) {
328                         /* Don't allow wakeup */
329                         acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
330                         do_powersaver(cx->address, clock_ratio_index, dir);
331                 } else {
332                         do_powersaver(0, clock_ratio_index, dir);
333                 }
334                 break;
335         }
336
337         if (longhaul_flags & USE_NORTHBRIDGE) {
338                 /* Enable arbiters */
339                 outb(0, 0x22);
340         } else if ((pr != NULL) && pr->flags.bm_control) {
341                 /* Enable bus master arbitration */
342                 acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
343         }
344         outb(pic2_mask,0xA1);   /* restore mask */
345         outb(pic1_mask,0x21);
346
347         local_irq_restore(flags);
348         preempt_enable();
349
350         freqs.new = calc_speed(longhaul_get_cpu_mult());
351         /* Check if requested frequency is set. */
352         if (unlikely(freqs.new != speed)) {
353                 printk(KERN_INFO PFX "Failed to set requested frequency!\n");
354                 /* Revision ID = 1 but processor is expecting revision key
355                  * equal to 0. Jumpers at the bottom of processor will change
356                  * multiplier and FSB, but will not change bits in Longhaul
357                  * MSR nor enable voltage scaling. */
358                 if (!revid_errata) {
359                         printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
360                                                 "option.\n");
361                         revid_errata = 1;
362                         msleep(200);
363                         goto retry_loop;
364                 }
365                 /* Why ACPI C3 sometimes doesn't work is a mystery for me.
366                  * But it does happen. Processor is entering ACPI C3 state,
367                  * but it doesn't change frequency. I tried poking various
368                  * bits in northbridge registers, but without success. */
369                 if (longhaul_flags & USE_ACPI_C3) {
370                         printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
371                         longhaul_flags &= ~USE_ACPI_C3;
372                         if (revid_errata) {
373                                 printk(KERN_INFO PFX "Disabling \"Ignore "
374                                                 "Revision ID\" option.\n");
375                                 revid_errata = 0;
376                         }
377                         msleep(200);
378                         goto retry_loop;
379                 }
380                 /* This shouldn't happen. Longhaul ver. 2 was reported not
381                  * working on processors without voltage scaling, but with
382                  * RevID = 1. RevID errata will make things right. Just
383                  * to be 100% sure. */
384                 if (longhaul_version == TYPE_LONGHAUL_V2) {
385                         printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
386                         longhaul_version = TYPE_LONGHAUL_V1;
387                         msleep(200);
388                         goto retry_loop;
389                 }
390         }
391         /* Report true CPU frequency */
392         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
393
394         if (!bm_timeout)
395                 printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n");
396 }
397
398 /*
399  * Centaur decided to make life a little more tricky.
400  * Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
401  * Samuel2 and above have to try and guess what the FSB is.
402  * We do this by assuming we booted at maximum multiplier, and interpolate
403  * between that value multiplied by possible FSBs and cpu_mhz which
404  * was calculated at boot time. Really ugly, but no other way to do this.
405  */
406
407 #define ROUNDING        0xf
408
409 static int guess_fsb(int mult)
410 {
411         int speed = cpu_khz / 1000;
412         int i;
413         int speeds[] = { 666, 1000, 1333, 2000 };
414         int f_max, f_min;
415
416         for (i = 0; i < 4; i++) {
417                 f_max = ((speeds[i] * mult) + 50) / 100;
418                 f_max += (ROUNDING / 2);
419                 f_min = f_max - ROUNDING;
420                 if ((speed <= f_max) && (speed >= f_min))
421                         return speeds[i] / 10;
422         }
423         return 0;
424 }
425
426
427 static int __init longhaul_get_ranges(void)
428 {
429         unsigned int i, j, k = 0;
430         unsigned int ratio;
431         int mult;
432
433         /* Get current frequency */
434         mult = longhaul_get_cpu_mult();
435         if (mult == -1) {
436                 printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
437                 return -EINVAL;
438         }
439         fsb = guess_fsb(mult);
440         if (fsb == 0) {
441                 printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
442                 return -EINVAL;
443         }
444         /* Get max multiplier - as we always did.
445          * Longhaul MSR is usefull only when voltage scaling is enabled.
446          * C3 is booting at max anyway. */
447         maxmult = mult;
448         /* Get min multiplier */
449         switch (cpu_model) {
450         case CPU_NEHEMIAH:
451                 minmult = 50;
452                 break;
453         case CPU_NEHEMIAH_C:
454                 minmult = 40;
455                 break;
456         default:
457                 minmult = 30;
458                 break;
459         }
460
461         dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
462                  minmult/10, minmult%10, maxmult/10, maxmult%10);
463
464         highest_speed = calc_speed(maxmult);
465         lowest_speed = calc_speed(minmult);
466         dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
467                  print_speed(lowest_speed/1000),
468                  print_speed(highest_speed/1000));
469
470         if (lowest_speed == highest_speed) {
471                 printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
472                 return -EINVAL;
473         }
474         if (lowest_speed > highest_speed) {
475                 printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
476                         lowest_speed, highest_speed);
477                 return -EINVAL;
478         }
479
480         longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
481         if(!longhaul_table)
482                 return -ENOMEM;
483
484         for (j = 0; j < numscales; j++) {
485                 ratio = clock_ratio[j];
486                 if (ratio == -1)
487                         continue;
488                 if (ratio > maxmult || ratio < minmult)
489                         continue;
490                 longhaul_table[k].frequency = calc_speed(ratio);
491                 longhaul_table[k].index = j;
492                 k++;
493         }
494         if (k <= 1) {
495                 kfree(longhaul_table);
496                 return -ENODEV;
497         }
498         /* Sort */
499         for (j = 0; j < k - 1; j++) {
500                 unsigned int min_f, min_i;
501                 min_f = longhaul_table[j].frequency;
502                 min_i = j;
503                 for (i = j + 1; i < k; i++) {
504                         if (longhaul_table[i].frequency < min_f) {
505                                 min_f = longhaul_table[i].frequency;
506                                 min_i = i;
507                         }
508                 }
509                 if (min_i != j) {
510                         unsigned int temp;
511                         temp = longhaul_table[j].frequency;
512                         longhaul_table[j].frequency = longhaul_table[min_i].frequency;
513                         longhaul_table[min_i].frequency = temp;
514                         temp = longhaul_table[j].index;
515                         longhaul_table[j].index = longhaul_table[min_i].index;
516                         longhaul_table[min_i].index = temp;
517                 }
518         }
519
520         longhaul_table[k].frequency = CPUFREQ_TABLE_END;
521
522         /* Find index we are running on */
523         for (j = 0; j < k; j++) {
524                 if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) {
525                         longhaul_index = j;
526                         break;
527                 }
528         }
529         return 0;
530 }
531
532
533 static void __init longhaul_setup_voltagescaling(void)
534 {
535         union msr_longhaul longhaul;
536         struct mV_pos minvid, maxvid, vid;
537         unsigned int j, speed, pos, kHz_step, numvscales;
538         int min_vid_speed;
539
540         rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
541         if (!(longhaul.bits.RevisionID & 1)) {
542                 printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
543                 return;
544         }
545
546         if (!longhaul.bits.VRMRev) {
547                 printk(KERN_INFO PFX "VRM 8.5\n");
548                 vrm_mV_table = &vrm85_mV[0];
549                 mV_vrm_table = &mV_vrm85[0];
550         } else {
551                 printk(KERN_INFO PFX "Mobile VRM\n");
552                 if (cpu_model < CPU_NEHEMIAH)
553                         return;
554                 vrm_mV_table = &mobilevrm_mV[0];
555                 mV_vrm_table = &mV_mobilevrm[0];
556         }
557
558         minvid = vrm_mV_table[longhaul.bits.MinimumVID];
559         maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
560
561         if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
562                 printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
563                                         "Voltage scaling disabled.\n",
564                                         minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
565                 return;
566         }
567
568         if (minvid.mV == maxvid.mV) {
569                 printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
570                                 "both %d.%03d. Voltage scaling disabled\n",
571                                 maxvid.mV/1000, maxvid.mV%1000);
572                 return;
573         }
574
575         /* How many voltage steps */
576         numvscales = maxvid.pos - minvid.pos + 1;
577         printk(KERN_INFO PFX
578                 "Max VID=%d.%03d  "
579                 "Min VID=%d.%03d, "
580                 "%d possible voltage scales\n",
581                 maxvid.mV/1000, maxvid.mV%1000,
582                 minvid.mV/1000, minvid.mV%1000,
583                 numvscales);
584
585         /* Calculate max frequency at min voltage */
586         j = longhaul.bits.MinMHzBR;
587         if (longhaul.bits.MinMHzBR4)
588                 j += 16;
589         min_vid_speed = eblcr_table[j];
590         if (min_vid_speed == -1)
591                 return;
592         switch (longhaul.bits.MinMHzFSB) {
593         case 0:
594                 min_vid_speed *= 13333;
595                 break;
596         case 1:
597                 min_vid_speed *= 10000;
598                 break;
599         case 3:
600                 min_vid_speed *= 6666;
601                 break;
602         default:
603                 return;
604                 break;
605         }
606         if (min_vid_speed >= highest_speed)
607                 return;
608         /* Calculate kHz for one voltage step */
609         kHz_step = (highest_speed - min_vid_speed) / numvscales;
610
611         j = 0;
612         while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
613                 speed = longhaul_table[j].frequency;
614                 if (speed > min_vid_speed)
615                         pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
616                 else
617                         pos = minvid.pos;
618                 longhaul_table[j].index |= mV_vrm_table[pos] << 8;
619                 vid = vrm_mV_table[mV_vrm_table[pos]];
620                 printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV);
621                 j++;
622         }
623
624         can_scale_voltage = 1;
625         printk(KERN_INFO PFX "Voltage scaling enabled.\n");
626 }
627
628
629 static int longhaul_verify(struct cpufreq_policy *policy)
630 {
631         return cpufreq_frequency_table_verify(policy, longhaul_table);
632 }
633
634
635 static int longhaul_target(struct cpufreq_policy *policy,
636                             unsigned int target_freq, unsigned int relation)
637 {
638         unsigned int table_index = 0;
639         unsigned int i;
640         unsigned int dir = 0;
641         u8 vid, current_vid;
642
643         if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
644                 return -EINVAL;
645
646         /* Don't set same frequency again */
647         if (longhaul_index == table_index)
648                 return 0;
649
650         if (!can_scale_voltage)
651                 longhaul_setstate(table_index);
652         else {
653                 /* On test system voltage transitions exceeding single
654                  * step up or down were turning motherboard off. Both
655                  * "ondemand" and "userspace" are unsafe. C7 is doing
656                  * this in hardware, C3 is old and we need to do this
657                  * in software. */
658                 i = longhaul_index;
659                 current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f;
660                 if (table_index > longhaul_index)
661                         dir = 1;
662                 while (i != table_index) {
663                         vid = (longhaul_table[i].index >> 8) & 0x1f;
664                         if (vid != current_vid) {
665                                 longhaul_setstate(i);
666                                 current_vid = vid;
667                                 msleep(200);
668                         }
669                         if (dir)
670                                 i++;
671                         else
672                                 i--;
673                 }
674                 longhaul_setstate(table_index);
675         }
676         longhaul_index = table_index;
677         return 0;
678 }
679
680
681 static unsigned int longhaul_get(unsigned int cpu)
682 {
683         if (cpu)
684                 return 0;
685         return calc_speed(longhaul_get_cpu_mult());
686 }
687
688 static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
689                                           u32 nesting_level,
690                                           void *context, void **return_value)
691 {
692         struct acpi_device *d;
693
694         if ( acpi_bus_get_device(obj_handle, &d) ) {
695                 return 0;
696         }
697         *return_value = (void *)acpi_driver_data(d);
698         return 1;
699 }
700
701 /* VIA don't support PM2 reg, but have something similar */
702 static int enable_arbiter_disable(void)
703 {
704         struct pci_dev *dev;
705         int status = 1;
706         int reg;
707         u8 pci_cmd;
708
709         /* Find PLE133 host bridge */
710         reg = 0x78;
711         dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
712                              NULL);
713         /* Find CLE266 host bridge */
714         if (dev == NULL) {
715                 reg = 0x76;
716                 dev = pci_get_device(PCI_VENDOR_ID_VIA,
717                                      PCI_DEVICE_ID_VIA_862X_0, NULL);
718                 /* Find CN400 V-Link host bridge */
719                 if (dev == NULL)
720                         dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
721         }
722         if (dev != NULL) {
723                 /* Enable access to port 0x22 */
724                 pci_read_config_byte(dev, reg, &pci_cmd);
725                 if (!(pci_cmd & 1<<7)) {
726                         pci_cmd |= 1<<7;
727                         pci_write_config_byte(dev, reg, pci_cmd);
728                         pci_read_config_byte(dev, reg, &pci_cmd);
729                         if (!(pci_cmd & 1<<7)) {
730                                 printk(KERN_ERR PFX
731                                         "Can't enable access to port 0x22.\n");
732                                 status = 0;
733                         }
734                 }
735                 pci_dev_put(dev);
736                 return status;
737         }
738         return 0;
739 }
740
741 static int longhaul_setup_southbridge(void)
742 {
743         struct pci_dev *dev;
744         u8 pci_cmd;
745
746         /* Find VT8235 southbridge */
747         dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
748         if (dev == NULL)
749         /* Find VT8237 southbridge */
750                 dev = pci_get_device(PCI_VENDOR_ID_VIA,
751                                      PCI_DEVICE_ID_VIA_8237, NULL);
752         if (dev != NULL) {
753                 /* Set transition time to max */
754                 pci_read_config_byte(dev, 0xec, &pci_cmd);
755                 pci_cmd &= ~(1 << 2);
756                 pci_write_config_byte(dev, 0xec, pci_cmd);
757                 pci_read_config_byte(dev, 0xe4, &pci_cmd);
758                 pci_cmd &= ~(1 << 7);
759                 pci_write_config_byte(dev, 0xe4, pci_cmd);
760                 pci_read_config_byte(dev, 0xe5, &pci_cmd);
761                 pci_cmd |= 1 << 7;
762                 pci_write_config_byte(dev, 0xe5, pci_cmd);
763                 /* Get address of ACPI registers block*/
764                 pci_read_config_byte(dev, 0x81, &pci_cmd);
765                 if (pci_cmd & 1 << 7) {
766                         pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
767                         acpi_regs_addr &= 0xff00;
768                         printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr);
769                 }
770
771                 pci_dev_put(dev);
772                 return 1;
773         }
774         return 0;
775 }
776
777 static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
778 {
779         struct cpuinfo_x86 *c = cpu_data;
780         char *cpuname=NULL;
781         int ret;
782         u32 lo, hi;
783
784         /* Check what we have on this motherboard */
785         switch (c->x86_model) {
786         case 6:
787                 cpu_model = CPU_SAMUEL;
788                 cpuname = "C3 'Samuel' [C5A]";
789                 longhaul_version = TYPE_LONGHAUL_V1;
790                 memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
791                 memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
792                 break;
793
794         case 7:
795                 switch (c->x86_mask) {
796                 case 0:
797                         longhaul_version = TYPE_LONGHAUL_V1;
798                         cpu_model = CPU_SAMUEL2;
799                         cpuname = "C3 'Samuel 2' [C5B]";
800                         /* Note, this is not a typo, early Samuel2's had
801                          * Samuel1 ratios. */
802                         memcpy(clock_ratio, samuel1_clock_ratio,
803                                 sizeof(samuel1_clock_ratio));
804                         memcpy(eblcr_table, samuel2_eblcr,
805                                 sizeof(samuel2_eblcr));
806                         break;
807                 case 1 ... 15:
808                         longhaul_version = TYPE_LONGHAUL_V1;
809                         if (c->x86_mask < 8) {
810                                 cpu_model = CPU_SAMUEL2;
811                                 cpuname = "C3 'Samuel 2' [C5B]";
812                         } else {
813                                 cpu_model = CPU_EZRA;
814                                 cpuname = "C3 'Ezra' [C5C]";
815                         }
816                         memcpy(clock_ratio, ezra_clock_ratio,
817                                 sizeof(ezra_clock_ratio));
818                         memcpy(eblcr_table, ezra_eblcr,
819                                 sizeof(ezra_eblcr));
820                         break;
821                 }
822                 break;
823
824         case 8:
825                 cpu_model = CPU_EZRA_T;
826                 cpuname = "C3 'Ezra-T' [C5M]";
827                 longhaul_version = TYPE_POWERSAVER;
828                 numscales=32;
829                 memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
830                 memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
831                 break;
832
833         case 9:
834                 longhaul_version = TYPE_POWERSAVER;
835                 numscales = 32;
836                 memcpy(clock_ratio,
837                        nehemiah_clock_ratio,
838                        sizeof(nehemiah_clock_ratio));
839                 memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr));
840                 switch (c->x86_mask) {
841                 case 0 ... 1:
842                         cpu_model = CPU_NEHEMIAH;
843                         cpuname = "C3 'Nehemiah A' [C5XLOE]";
844                         break;
845                 case 2 ... 4:
846                         cpu_model = CPU_NEHEMIAH;
847                         cpuname = "C3 'Nehemiah B' [C5XLOH]";
848                         break;
849                 case 5 ... 15:
850                         cpu_model = CPU_NEHEMIAH_C;
851                         cpuname = "C3 'Nehemiah C' [C5P]";
852                         break;
853                 }
854                 break;
855
856         default:
857                 cpuname = "Unknown";
858                 break;
859         }
860         /* Check Longhaul ver. 2 */
861         if (longhaul_version == TYPE_LONGHAUL_V2) {
862                 rdmsr(MSR_VIA_LONGHAUL, lo, hi);
863                 if (lo == 0 && hi == 0)
864                         /* Looks like MSR isn't present */
865                         longhaul_version = TYPE_LONGHAUL_V1;
866         }
867
868         printk (KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
869         switch (longhaul_version) {
870         case TYPE_LONGHAUL_V1:
871         case TYPE_LONGHAUL_V2:
872                 printk ("Longhaul v%d supported.\n", longhaul_version);
873                 break;
874         case TYPE_POWERSAVER:
875                 printk ("Powersaver supported.\n");
876                 break;
877         };
878
879         /* Doesn't hurt */
880         longhaul_setup_southbridge();
881
882         /* Find ACPI data for processor */
883         acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
884                                 ACPI_UINT32_MAX, &longhaul_walk_callback,
885                                 NULL, (void *)&pr);
886
887         /* Check ACPI support for C3 state */
888         if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
889                 cx = &pr->power.states[ACPI_STATE_C3];
890                 if (cx->address > 0 && cx->latency <= 1000)
891                         longhaul_flags |= USE_ACPI_C3;
892         }
893         /* Disable if it isn't working */
894         if (disable_acpi_c3)
895                 longhaul_flags &= ~USE_ACPI_C3;
896         /* Check if northbridge is friendly */
897         if (enable_arbiter_disable())
898                 longhaul_flags |= USE_NORTHBRIDGE;
899
900         /* Check ACPI support for bus master arbiter disable */
901         if (!(longhaul_flags & USE_ACPI_C3
902              || longhaul_flags & USE_NORTHBRIDGE)
903             && ((pr == NULL) || !(pr->flags.bm_control))) {
904                 printk(KERN_ERR PFX
905                         "No ACPI support. Unsupported northbridge.\n");
906                 return -ENODEV;
907         }
908
909         if (longhaul_flags & USE_NORTHBRIDGE)
910                 printk(KERN_INFO PFX "Using northbridge support.\n");
911         if (longhaul_flags & USE_ACPI_C3)
912                 printk(KERN_INFO PFX "Using ACPI support.\n");
913
914         ret = longhaul_get_ranges();
915         if (ret != 0)
916                 return ret;
917
918         if ((longhaul_version != TYPE_LONGHAUL_V1) && (scale_voltage != 0))
919                 longhaul_setup_voltagescaling();
920
921         policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
922         policy->cpuinfo.transition_latency = 200000;    /* nsec */
923         policy->cur = calc_speed(longhaul_get_cpu_mult());
924
925         ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
926         if (ret)
927                 return ret;
928
929         cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
930
931         return 0;
932 }
933
934 static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
935 {
936         cpufreq_frequency_table_put_attr(policy->cpu);
937         return 0;
938 }
939
940 static struct freq_attr* longhaul_attr[] = {
941         &cpufreq_freq_attr_scaling_available_freqs,
942         NULL,
943 };
944
945 static struct cpufreq_driver longhaul_driver = {
946         .verify = longhaul_verify,
947         .target = longhaul_target,
948         .get    = longhaul_get,
949         .init   = longhaul_cpu_init,
950         .exit   = __devexit_p(longhaul_cpu_exit),
951         .name   = "longhaul",
952         .owner  = THIS_MODULE,
953         .attr   = longhaul_attr,
954 };
955
956
957 static int __init longhaul_init(void)
958 {
959         struct cpuinfo_x86 *c = cpu_data;
960
961         if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
962                 return -ENODEV;
963
964 #ifdef CONFIG_SMP
965         if (num_online_cpus() > 1) {
966                 printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
967                 return -ENODEV;
968         }
969 #endif
970 #ifdef CONFIG_X86_IO_APIC
971         if (cpu_has_apic) {
972                 printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
973                 return -ENODEV;
974         }
975 #endif
976         switch (c->x86_model) {
977         case 6 ... 9:
978                 return cpufreq_register_driver(&longhaul_driver);
979         case 10:
980                 printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
981         default:
982                 ;;
983         }
984
985         return -ENODEV;
986 }
987
988
989 static void __exit longhaul_exit(void)
990 {
991         int i;
992
993         for (i=0; i < numscales; i++) {
994                 if (clock_ratio[i] == maxmult) {
995                         longhaul_setstate(i);
996                         break;
997                 }
998         }
999
1000         cpufreq_unregister_driver(&longhaul_driver);
1001         kfree(longhaul_table);
1002 }
1003
1004 /* Even if BIOS is exporting ACPI C3 state, and it is used
1005  * with success when CPU is idle, this state doesn't
1006  * trigger frequency transition in some cases. */
1007 module_param (disable_acpi_c3, int, 0644);
1008 MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
1009 /* Change CPU voltage with frequency. Very usefull to save
1010  * power, but most VIA C3 processors aren't supporting it. */
1011 module_param (scale_voltage, int, 0644);
1012 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
1013 /* Force revision key to 0 for processors which doesn't
1014  * support voltage scaling, but are introducing itself as
1015  * such. */
1016 module_param(revid_errata, int, 0644);
1017 MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
1018
1019 MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
1020 MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
1021 MODULE_LICENSE ("GPL");
1022
1023 late_initcall(longhaul_init);
1024 module_exit(longhaul_exit);