arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Lenovo Yoga C630
   4  *
   5  * Copyright (c) 2019, Linaro Ltd.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/input/gpio-keys.h>
  11 #include <dt-bindings/input/input.h>
  12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  13 #include <dt-bindings/sound/qcom,q6afe.h>
  14 #include <dt-bindings/sound/qcom,q6asm.h>
  15 #include "sdm850.dtsi"
  16 #include "pm8998.dtsi"
  17
  18 /*
  19  * Update following upstream (sdm845.dtsi) reserved
  20  * memory mappings for firmware loading to succeed
  21  * and enable the IPA device.
  22  */
  23 /delete-node/ &ipa_fw_mem;
  24 /delete-node/ &ipa_gsi_mem;
  25 /delete-node/ &gpu_mem;
  26 /delete-node/ &adsp_mem;
  27 /delete-node/ &wlan_msa_mem;
  28
  29 / {
  30         model = "Lenovo Yoga C630";
  31         compatible = "lenovo,yoga-c630", "qcom,sdm845";
  32         chassis-type = "convertible";
  33
  34         aliases {
  35                 hsuart0 = &uart6;
  36         };
  37
  38         gpio-keys {
  39                 compatible = "gpio-keys";
  40
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
  43
  44                 lid {
  45                         gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
  46                         linux,input-type = <EV_SW>;
  47                         linux,code = <SW_LID>;
  48                         wakeup-source;
  49                         wakeup-event-action = <EV_ACT_DEASSERTED>;
  50                 };
  51
  52                 mode {
  53                         gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
  54                         linux,input-type = <EV_SW>;
  55                         linux,code = <SW_TABLET_MODE>;
  56                 };
  57         };
  58
  59         /* Reserved memory changes for IPA */
  60         reserved-memory {
  61                 wlan_msa_mem: memory@8c400000 {
  62                         reg = <0 0x8c400000 0 0x100000>;
  63                         no-map;
  64                 };
  65
  66                 gpu_mem: memory@8c515000 {
  67                         reg = <0 0x8c515000 0 0x2000>;
  68                         no-map;
  69                 };
  70
  71                 ipa_fw_mem: memory@8c517000 {
  72                         reg = <0 0x8c517000 0 0x5a000>;
  73                         no-map;
  74                 };
  75
  76                 adsp_mem: memory@8c600000 {
  77                         reg = <0 0x8c600000 0 0x1a00000>;
  78                         no-map;
  79                 };
  80         };
  81
  82         sn65dsi86_refclk: sn65dsi86-refclk {
  83                 compatible = "fixed-clock";
  84                 #clock-cells = <0>;
  85
  86                 clock-frequency = <19200000>;
  87         };
  88
  89         backlight: backlight {
  90                 compatible = "pwm-backlight";
  91                 pwms = <&sn65dsi86 1000000>;
  92                 enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
  93         };
  94 };
  95
  96 &adsp_pas {
  97         firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
  98         status = "okay";
  99 };
 100
 101 &apps_rsc {
 102         pm8998-rpmh-regulators {
 103                 compatible = "qcom,pm8998-rpmh-regulators";
 104                 qcom,pmic-id = "a";
 105
 106                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 107                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 108
 109                 vreg_s2a_1p125: smps2 {
 110                 };
 111
 112                 vreg_s3a_1p35: smps3 {
 113                         regulator-min-microvolt = <1352000>;
 114                         regulator-max-microvolt = <1352000>;
 115                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 116                 };
 117
 118                 vreg_s4a_1p8: smps4 {
 119                         regulator-min-microvolt = <1800000>;
 120                         regulator-max-microvolt = <1800000>;
 121                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 122                 };
 123
 124                 vreg_s5a_2p04: smps5 {
 125                         regulator-min-microvolt = <2040000>;
 126                         regulator-max-microvolt = <2040000>;
 127                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 128                 };
 129
 130                 vreg_s7a_1p025: smps7 {
 131                 };
 132
 133                 vdd_qusb_hs0:
 134                 vdda_hp_pcie_core:
 135                 vdda_mipi_csi0_0p9:
 136                 vdda_mipi_csi1_0p9:
 137                 vdda_mipi_csi2_0p9:
 138                 vdda_mipi_dsi0_pll:
 139                 vdda_mipi_dsi1_pll:
 140                 vdda_qlink_lv:
 141                 vdda_qlink_lv_ck:
 142                 vdda_qrefs_0p875:
 143                 vdda_pcie_core:
 144                 vdda_pll_cc_ebi01:
 145                 vdda_pll_cc_ebi23:
 146                 vdda_sp_sensor:
 147                 vdda_ufs1_core:
 148                 vdda_ufs2_core:
 149                 vdda_usb1_ss_core:
 150                 vdda_usb2_ss_core:
 151                 vreg_l1a_0p875: ldo1 {
 152                         regulator-min-microvolt = <880000>;
 153                         regulator-max-microvolt = <880000>;
 154                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 155                 };
 156
 157                 vddpx_10:
 158                 vreg_l2a_1p2: ldo2 {
 159                         regulator-min-microvolt = <1200000>;
 160                         regulator-max-microvolt = <1200000>;
 161                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 162                         regulator-always-on;
 163                 };
 164
 165                 vreg_l3a_1p0: ldo3 {
 166                 };
 167
 168                 vdd_wcss_cx:
 169                 vdd_wcss_mx:
 170                 vdda_wcss_pll:
 171                 vreg_l5a_0p8: ldo5 {
 172                         regulator-min-microvolt = <800000>;
 173                         regulator-max-microvolt = <800000>;
 174                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 175                 };
 176
 177                 vddpx_13:
 178                 vreg_l6a_1p8: ldo6 {
 179                         regulator-min-microvolt = <1800000>;
 180                         regulator-max-microvolt = <1800000>;
 181                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 182                 };
 183
 184                 vreg_l7a_1p8: ldo7 {
 185                         regulator-min-microvolt = <1800000>;
 186                         regulator-max-microvolt = <1800000>;
 187                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 188                 };
 189
 190                 vreg_l8a_1p2: ldo8 {
 191                 };
 192
 193                 vreg_l9a_1p8: ldo9 {
 194                 };
 195
 196                 vreg_l10a_1p8: ldo10 {
 197                 };
 198
 199                 vreg_l11a_1p0: ldo11 {
 200                 };
 201
 202                 vdd_qfprom:
 203                 vdd_qfprom_sp:
 204                 vdda_apc1_cs_1p8:
 205                 vdda_gfx_cs_1p8:
 206                 vdda_qrefs_1p8:
 207                 vdda_qusb_hs0_1p8:
 208                 vddpx_11:
 209                 vreg_l12a_1p8: ldo12 {
 210                         regulator-min-microvolt = <1800000>;
 211                         regulator-max-microvolt = <1800000>;
 212                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 213                 };
 214
 215                 vddpx_2:
 216                 vreg_l13a_2p95: ldo13 {
 217                 };
 218
 219                 vreg_l14a_1p88: ldo14 {
 220                         regulator-min-microvolt = <1880000>;
 221                         regulator-max-microvolt = <1880000>;
 222                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 223                         regulator-always-on;
 224                 };
 225
 226                 vreg_l15a_1p8: ldo15 {
 227                 };
 228
 229                 vreg_l16a_2p7: ldo16 {
 230                 };
 231
 232                 vreg_l17a_1p3: ldo17 {
 233                         regulator-min-microvolt = <1304000>;
 234                         regulator-max-microvolt = <1304000>;
 235                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 236                 };
 237
 238                 vreg_l18a_2p7: ldo18 {
 239                 };
 240
 241                 vreg_l19a_3p0: ldo19 {
 242                         regulator-min-microvolt = <3100000>;
 243                         regulator-max-microvolt = <3108000>;
 244                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 245                 };
 246
 247                 vreg_l20a_2p95: ldo20 {
 248                         regulator-min-microvolt = <2960000>;
 249                         regulator-max-microvolt = <2960000>;
 250                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 251                 };
 252
 253                 vreg_l21a_2p95: ldo21 {
 254                 };
 255
 256                 vreg_l22a_2p85: ldo22 {
 257                 };
 258
 259                 vreg_l23a_3p3: ldo23 {
 260                         regulator-min-microvolt = <3300000>;
 261                         regulator-max-microvolt = <3312000>;
 262                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 263                 };
 264
 265                 vdda_qusb_hs0_3p1:
 266                 vreg_l24a_3p075: ldo24 {
 267                         regulator-min-microvolt = <3075000>;
 268                         regulator-max-microvolt = <3083000>;
 269                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 270                 };
 271
 272                 vreg_l25a_3p3: ldo25 {
 273                         regulator-min-microvolt = <3104000>;
 274                         regulator-max-microvolt = <3112000>;
 275                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 276                 };
 277
 278                 vdda_hp_pcie_1p2:
 279                 vdda_hv_ebi0:
 280                 vdda_hv_ebi1:
 281                 vdda_hv_ebi2:
 282                 vdda_hv_ebi3:
 283                 vdda_mipi_csi_1p25:
 284                 vdda_mipi_dsi0_1p2:
 285                 vdda_mipi_dsi1_1p2:
 286                 vdda_pcie_1p2:
 287                 vdda_ufs1_1p2:
 288                 vdda_ufs2_1p2:
 289                 vdda_usb1_ss_1p2:
 290                 vdda_usb2_ss_1p2:
 291                 vreg_l26a_1p2: ldo26 {
 292                         regulator-min-microvolt = <1200000>;
 293                         regulator-max-microvolt = <1208000>;
 294                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 295                 };
 296
 297                 vreg_l28a_3p0: ldo28 {
 298                 };
 299
 300                 vreg_lvs1a_1p8: lvs1 {
 301                 };
 302
 303                 vreg_lvs2a_1p8: lvs2 {
 304                 };
 305         };
 306 };
 307
 308 &cdsp_pas {
 309         firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn";
 310         status = "okay";
 311 };
 312
 313 &dsi0 {
 314         status = "okay";
 315         vdda-supply = <&vreg_l26a_1p2>;
 316
 317         ports {
 318                 port@1 {
 319                         endpoint {
 320                                 remote-endpoint = <&sn65dsi86_in_a>;
 321                                 data-lanes = <0 1 2 3>;
 322                         };
 323                 };
 324         };
 325 };
 326
 327 &dsi0_phy {
 328         status = "okay";
 329         vdds-supply = <&vreg_l1a_0p875>;
 330 };
 331
 332 &gcc {
 333         protected-clocks = <GCC_QSPI_CORE_CLK>,
 334                            <GCC_QSPI_CORE_CLK_SRC>,
 335                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 336                            <GCC_LPASS_Q6_AXI_CLK>,
 337                            <GCC_LPASS_SWAY_CLK>;
 338 };
 339
 340 &gmu {
 341         status = "okay";
 342 };
 343
 344 &gpu {
 345         status = "okay";
 346         zap-shader {
 347                 memory-region = <&gpu_mem>;
 348                 firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
 349         };
 350 };
 351
 352 &i2c1 {
 353         status = "okay";
 354         clock-frequency = <400000>;
 355 };
 356
 357 &i2c3 {
 358         status = "okay";
 359         clock-frequency = <400000>;
 360         /* Overwrite pinctrl-0 from sdm845.dtsi */
 361         pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
 362
 363         tsel: hid@15 {
 364                 compatible = "hid-over-i2c";
 365                 reg = <0x15>;
 366                 hid-descr-addr = <0x1>;
 367
 368                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 369         };
 370
 371         tsc2: hid@2c {
 372                 compatible = "hid-over-i2c";
 373                 reg = <0x2c>;
 374                 hid-descr-addr = <0x20>;
 375
 376                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
 377         };
 378 };
 379
 380 &i2c5 {
 381         status = "okay";
 382         clock-frequency = <400000>;
 383
 384         tsc1: hid@10 {
 385                 compatible = "hid-over-i2c";
 386                 reg = <0x10>;
 387                 hid-descr-addr = <0x1>;
 388
 389                 interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
 390
 391                 pinctrl-names = "default";
 392                 pinctrl-0 = <&i2c5_hid_active>;
 393         };
 394 };
 395
 396 &i2c10 {
 397         status = "okay";
 398         clock-frequency = <400000>;
 399
 400         sn65dsi86: bridge@2c {
 401                 compatible = "ti,sn65dsi86";
 402                 reg = <0x2c>;
 403                 pinctrl-names = "default";
 404                 pinctrl-0 = <&sn65dsi86_pin_active>;
 405
 406                 enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 407
 408                 vpll-supply = <&vreg_l14a_1p88>;
 409                 vccio-supply = <&vreg_l14a_1p88>;
 410
 411                 clocks = <&sn65dsi86_refclk>;
 412                 clock-names = "refclk";
 413
 414                 no-hpd;
 415                 #pwm-cells = <1>;
 416
 417                 ports {
 418                         #address-cells = <1>;
 419                         #size-cells = <0>;
 420
 421                         port@0 {
 422                                 reg = <0>;
 423                                 sn65dsi86_in_a: endpoint {
 424                                         remote-endpoint = <&dsi0_out>;
 425                                 };
 426                         };
 427
 428                         port@1 {
 429                                 reg = <1>;
 430                                 sn65dsi86_out: endpoint {
 431                                         remote-endpoint = <&panel_in_edp>;
 432                                 };
 433                         };
 434                 };
 435
 436                 aux-bus {
 437                         panel: panel {
 438                                 compatible = "boe,nv133fhm-n61";
 439                                 backlight = <&backlight>;
 440
 441                                 port {
 442                                         panel_in_edp: endpoint {
 443                                                 remote-endpoint = <&sn65dsi86_out>;
 444                                         };
 445                                 };
 446                         };
 447                 };
 448         };
 449 };
 450
 451 &i2c11 {
 452         status = "okay";
 453         clock-frequency = <400000>;
 454
 455         ecsh: hid@5c {
 456                 compatible = "hid-over-i2c";
 457                 reg = <0x5c>;
 458                 hid-descr-addr = <0x1>;
 459
 460                 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
 461
 462                 pinctrl-names = "default";
 463                 pinctrl-0 = <&i2c11_hid_active>;
 464         };
 465 };
 466
 467 &ipa {
 468         status = "okay";
 469         memory-region = <&ipa_fw_mem>;
 470 };
 471
 472 &mdss {
 473         status = "okay";
 474 };
 475
 476 &mss_pil {
 477         status = "okay";
 478         firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn";
 479 };
 480
 481 &qup_i2c10_default {
 482         pinconf {
 483                 pins = "gpio55", "gpio56";
 484                 drive-strength = <2>;
 485                 bias-disable;
 486         };
 487 };
 488
 489 &qup_i2c12_default {
 490         drive-strength = <2>;
 491         bias-disable;
 492 };
 493
 494 &qup_uart6_default {
 495         pinmux {
 496                  pins = "gpio45", "gpio46", "gpio47", "gpio48";
 497                  function = "qup6";
 498         };
 499
 500         cts {
 501                 pins = "gpio45";
 502                 bias-pull-down;
 503         };
 504
 505         rts-tx {
 506                 pins = "gpio46", "gpio47";
 507                 drive-strength = <2>;
 508                 bias-disable;
 509         };
 510
 511         rx {
 512                 pins = "gpio48";
 513                 bias-pull-up;
 514         };
 515 };
 516
 517 &qupv3_id_0 {
 518         status = "okay";
 519 };
 520
 521 &qupv3_id_1 {
 522         status = "okay";
 523 };
 524
 525 &q6asmdai {
 526         dai@0 {
 527                 reg = <0>;
 528         };
 529
 530         dai@1 {
 531                 reg = <1>;
 532         };
 533
 534         dai@2 {
 535                 reg = <2>;
 536         };
 537 };
 538
 539 &sound {
 540         compatible = "qcom,db845c-sndcard";
 541         model = "Lenovo-YOGA-C630-13Q50";
 542
 543         audio-routing =
 544                 "RX_BIAS", "MCLK",
 545                 "AMIC2", "MIC BIAS2",
 546                 "SpkrLeft IN", "SPK1 OUT",
 547                 "SpkrRight IN", "SPK2 OUT",
 548                 "MM_DL1",  "MultiMedia1 Playback",
 549                 "MM_DL3",  "MultiMedia3 Playback",
 550                 "MultiMedia2 Capture", "MM_UL2";
 551
 552         mm1-dai-link {
 553                 link-name = "MultiMedia1";
 554                 cpu {
 555                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 556                 };
 557         };
 558
 559         mm2-dai-link {
 560                 link-name = "MultiMedia2";
 561                 cpu {
 562                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 563                 };
 564         };
 565
 566         mm3-dai-link {
 567                 link-name = "MultiMedia3";
 568                 cpu {
 569                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
 570                 };
 571         };
 572
 573         slim-dai-link {
 574                 link-name = "SLIM Playback";
 575                 cpu {
 576                         sound-dai = <&q6afedai SLIMBUS_0_RX>;
 577                 };
 578
 579                 platform {
 580                         sound-dai = <&q6routing>;
 581                 };
 582
 583                 codec {
 584                         sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
 585                 };
 586         };
 587
 588         slimcap-dai-link {
 589                 link-name = "SLIM Capture";
 590                 cpu {
 591                         sound-dai = <&q6afedai SLIMBUS_0_TX>;
 592                 };
 593
 594                 platform {
 595                         sound-dai = <&q6routing>;
 596                 };
 597
 598                 codec {
 599                         sound-dai = <&wcd9340 1>;
 600                 };
 601         };
 602
 603         slim-wcd-dai-link {
 604                 link-name = "SLIM WCD Playback";
 605                 cpu {
 606                         sound-dai = <&q6afedai SLIMBUS_1_RX>;
 607                 };
 608
 609                 platform {
 610                         sound-dai = <&q6routing>;
 611                 };
 612
 613                 codec {
 614                         sound-dai =  <&wcd9340 2>;
 615                 };
 616         };
 617 };
 618
 619 &tlmm {
 620         gpio-reserved-ranges = <0 4>, <81 4>;
 621
 622         sn65dsi86_pin_active: sn65dsi86-enable {
 623                 pins = "gpio96";
 624                 drive-strength = <2>;
 625                 bias-disable;
 626         };
 627
 628         i2c3_hid_active: i2c2-hid-active {
 629                 pins = "gpio37";
 630                 function = "gpio";
 631
 632                 input-enable;
 633                 bias-pull-up;
 634                 drive-strength = <2>;
 635         };
 636
 637         i2c5_hid_active: i2c5-hid-active {
 638                 pins = "gpio125";
 639                 function = "gpio";
 640
 641                 input-enable;
 642                 bias-pull-up;
 643                 drive-strength = <2>;
 644         };
 645
 646         i2c11_hid_active: i2c11-hid-active {
 647                 pins = "gpio92";
 648                 function = "gpio";
 649
 650                 input-enable;
 651                 bias-pull-up;
 652                 drive-strength = <2>;
 653         };
 654
 655         wcd_intr_default: wcd_intr_default {
 656                 pins = "gpio54";
 657                 function = "gpio";
 658
 659                 input-enable;
 660                 bias-pull-down;
 661                 drive-strength = <2>;
 662         };
 663
 664         lid_pin_active: lid-pin {
 665                 pins = "gpio124";
 666                 function = "gpio";
 667
 668                 input-enable;
 669                 bias-disable;
 670         };
 671
 672         mode_pin_active: mode-pin {
 673                 pins = "gpio95";
 674                 function = "gpio";
 675
 676                 input-enable;
 677                 bias-disable;
 678         };
 679 };
 680
 681 &uart6 {
 682         status = "okay";
 683
 684         bluetooth {
 685                 compatible = "qcom,wcn3990-bt";
 686
 687                 vddio-supply = <&vreg_s4a_1p8>;
 688                 vddxo-supply = <&vreg_l7a_1p8>;
 689                 vddrf-supply = <&vreg_l17a_1p3>;
 690                 vddch0-supply = <&vreg_l25a_3p3>;
 691                 vddch1-supply = <&vreg_l23a_3p3>;
 692                 max-speed = <3200000>;
 693         };
 694 };
 695
 696 &ufs_mem_hc {
 697         status = "okay";
 698
 699         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 700
 701         vcc-supply = <&vreg_l20a_2p95>;
 702         vcc-max-microamp = <600000>;
 703 };
 704
 705 &ufs_mem_phy {
 706         status = "okay";
 707
 708         vdda-phy-supply = <&vdda_ufs1_core>;
 709         vdda-pll-supply = <&vdda_ufs1_1p2>;
 710 };
 711
 712 &usb_1 {
 713         status = "okay";
 714 };
 715
 716 &usb_1_dwc3 {
 717         dr_mode = "host";
 718 };
 719
 720 &usb_1_hsphy {
 721         status = "okay";
 722
 723         vdd-supply = <&vdda_usb1_ss_core>;
 724         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 725         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 726
 727         qcom,imp-res-offset-value = <8>;
 728         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 729         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 730         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 731 };
 732
 733 &usb_1_qmpphy {
 734         status = "okay";
 735
 736         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 737         vdda-pll-supply = <&vdda_usb1_ss_core>;
 738 };
 739
 740 &usb_2 {
 741         status = "okay";
 742 };
 743
 744 &usb_2_dwc3 {
 745         dr_mode = "host";
 746 };
 747
 748 &usb_2_hsphy {
 749         status = "okay";
 750
 751         vdd-supply = <&vdda_usb2_ss_core>;
 752         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 753         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 754
 755         qcom,imp-res-offset-value = <8>;
 756         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
 757 };
 758
 759 &usb_2_qmpphy {
 760         status = "okay";
 761
 762         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
 763         vdda-pll-supply = <&vdda_usb2_ss_core>;
 764 };
 765
 766 &venus {
 767         status = "okay";
 768 };
 769
 770 &wcd9340{
 771         pinctrl-0 = <&wcd_intr_default>;
 772         pinctrl-names = "default";
 773         clock-names = "extclk";
 774         clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 775         reset-gpios = <&tlmm 64 0>;
 776         vdd-buck-supply = <&vreg_s4a_1p8>;
 777         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 778         vdd-tx-supply = <&vreg_s4a_1p8>;
 779         vdd-rx-supply = <&vreg_s4a_1p8>;
 780         vdd-io-supply = <&vreg_s4a_1p8>;
 781         qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
 782         qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 783         qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 784
 785         swm: swm@c85 {
 786                 left_spkr: wsa8810-left{
 787                         compatible = "sdw10217211000";
 788                         reg = <0 3>;
 789                         powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 790                         #thermal-sensor-cells = <0>;
 791                         sound-name-prefix = "SpkrLeft";
 792                         #sound-dai-cells = <0>;
 793                 };
 794
 795                 right_spkr: wsa8810-right{
 796                         compatible = "sdw10217211000";
 797                         powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 798                         reg = <0 4>;
 799                         #thermal-sensor-cells = <0>;
 800                         sound-name-prefix = "SpkrRight";
 801                         #sound-dai-cells = <0>;
 802                 };
 803         };
 804 };
 805
 806 &wifi {
 807         status = "okay";
 808
 809         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 810         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 811         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 812         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 813         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 814
 815         qcom,snoc-host-cap-8bit-quirk;
 816 };
 817
 818 &crypto {
 819         /* FIXME: qce_start triggers an SError */
 820         status= "disable";
 821 };