arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com>
   4  */
   5 /dts-v1/;
   6
   7 #include "msm8953.dtsi"
   8 #include "pm8953.dtsi"
   9 #include "pmi8950.dtsi"
  10
  11 /delete-node/ &qseecom_mem;
  12
  13 / {
  14         model = "Motorola Moto G6";
  15         compatible = "motorola,ali", "qcom,sdm450";
  16         chassis-type = "handset";
  17         qcom,msm-id = <338 0>;
  18         qcom,board-id = <0x43 0xc200>;
  19
  20         gpio-keys {
  21                 compatible = "gpio-keys";
  22
  23                 key-volume-up {
  24                         label = "volume_up";
  25                         gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_VOLUMEUP>;
  27                 };
  28         };
  29
  30         reserved-memory {
  31                 qseecom_mem: qseecom@84300000 {
  32                         reg = <0x0 0x84300000 0x0 0x2000000>;
  33                         no-map;
  34                 };
  35
  36                 ramoops@ef000000 {
  37                         compatible = "ramoops";
  38                         reg = <0x0 0xef000000 0x0 0xc0000>;
  39                         console-size = <0x40000>;
  40                 };
  41         };
  42
  43         vph_pwr: vph-pwr-regulator {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "vph_pwr";
  46                 regulator-always-on;
  47                 regulator-boot-on;
  48         };
  49 };
  50
  51 &hsusb_phy {
  52         vdd-supply = <&pm8953_l3>;
  53         vdda-pll-supply = <&pm8953_l7>;
  54         vdda-phy-dpdm-supply = <&pm8953_l13>;
  55
  56         status = "okay";
  57 };
  58
  59 &i2c_3 {
  60         status = "okay";
  61
  62         touchscreen@38 {
  63                 compatible = "edt,edt-ft5406";
  64                 reg = <0x38>;
  65                 interrupt-parent = <&tlmm>;
  66                 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
  67                 vcc-supply = <&pm8953_l10>;
  68
  69                 pinctrl-names = "default";
  70                 pinctrl-0 = <&ts_int_active &ts_reset_active>;
  71
  72                 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
  73                 touchscreen-size-x = <1080>;
  74                 touchscreen-size-y = <2160>;
  75         };
  76 };
  77
  78 &pm8953_resin {
  79         linux,code = <KEY_VOLUMEDOWN>;
  80         status = "okay";
  81 };
  82
  83 &pmi8950_wled {
  84         qcom,num-strings = <3>;
  85         qcom,external-pfet;
  86         qcom,cabc;
  87
  88         status = "okay";
  89 };
  90
  91 &rpm_requests {
  92         regulators {
  93                 compatible = "qcom,rpm-pm8953-regulators";
  94
  95                 vdd_s1-supply = <&vph_pwr>;
  96                 vdd_s2-supply = <&vph_pwr>;
  97                 vdd_s3-supply = <&vph_pwr>;
  98                 vdd_s4-supply = <&vph_pwr>;
  99                 vdd_s5-supply = <&vph_pwr>;
 100                 vdd_s6-supply = <&vph_pwr>;
 101                 vdd_s7-supply = <&vph_pwr>;
 102                 vdd_l1-supply = <&pm8953_s3>;
 103                 vdd_l2_l3-supply = <&pm8953_s3>;
 104                 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
 105                 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
 106                 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
 107
 108                 pm8953_s1: s1 {
 109                         regulator-min-microvolt = <795000>;
 110                         regulator-max-microvolt = <1081000>;
 111                 };
 112
 113                 pm8953_s3: s3 {
 114                         regulator-min-microvolt = <1224000>;
 115                         regulator-max-microvolt = <1224000>;
 116                 };
 117
 118                 pm8953_s4: s4 {
 119                         regulator-min-microvolt = <1900000>;
 120                         regulator-max-microvolt = <2050000>;
 121                 };
 122
 123                 pm8953_l1: l1 {
 124                         regulator-min-microvolt = <1000000>;
 125                         regulator-max-microvolt = <1100000>;
 126                 };
 127
 128                 pm8953_l2: l2 {
 129                         regulator-min-microvolt = <975000>;
 130                         regulator-max-microvolt = <1225000>;
 131                 };
 132
 133                 pm8953_l3: l3 {
 134                         regulator-min-microvolt = <925000>;
 135                         regulator-max-microvolt = <925000>;
 136                 };
 137
 138                 pm8953_l5: l5 {
 139                         regulator-min-microvolt = <1800000>;
 140                         regulator-max-microvolt = <1800000>;
 141                 };
 142
 143                 pm8953_l6: l6 {
 144                         regulator-min-microvolt = <1800000>;
 145                         regulator-max-microvolt = <1800000>;
 146                 };
 147
 148                 pm8953_l7: l7 {
 149                         regulator-min-microvolt = <1800000>;
 150                         regulator-max-microvolt = <1900000>;
 151                 };
 152
 153                 pm8953_l8: l8 {
 154                         regulator-min-microvolt = <2900000>;
 155                         regulator-max-microvolt = <2900000>;
 156                 };
 157
 158                 pm8953_l9: l9 {
 159                         regulator-min-microvolt = <3000000>;
 160                         regulator-max-microvolt = <3300000>;
 161                 };
 162
 163                 pm8953_l10: l10 {
 164                         regulator-min-microvolt = <2850000>;
 165                         regulator-max-microvolt = <2850000>;
 166                 };
 167
 168                 pm8953_l11: l11 {
 169                         regulator-min-microvolt = <2950000>;
 170                         regulator-max-microvolt = <2950000>;
 171                 };
 172
 173                 pm8953_l12: l12 {
 174                         regulator-min-microvolt = <1800000>;
 175                         regulator-max-microvolt = <2950000>;
 176                 };
 177
 178                 pm8953_l13: l13 {
 179                         regulator-min-microvolt = <3125000>;
 180                         regulator-max-microvolt = <3125000>;
 181                 };
 182
 183                 pm8953_l16: l16 {
 184                         regulator-min-microvolt = <1800000>;
 185                         regulator-max-microvolt = <1800000>;
 186                 };
 187
 188                 pm8953_l17: l17 {
 189                         regulator-min-microvolt = <2850000>;
 190                         regulator-max-microvolt = <2850000>;
 191                 };
 192
 193                 pm8953_l19: l19 {
 194                         regulator-min-microvolt = <1200000>;
 195                         regulator-max-microvolt = <1350000>;
 196                 };
 197
 198                 pm8953_l22: l22 {
 199                         regulator-min-microvolt = <2800000>;
 200                         regulator-max-microvolt = <2850000>;
 201                 };
 202
 203                 pm8953_l23: l23 {
 204                         regulator-min-microvolt = <975000>;
 205                         regulator-max-microvolt = <1225000>;
 206                 };
 207         };
 208 };
 209
 210 &sdhc_1 {
 211         vmmc-supply = <&pm8953_l8>;
 212         vqmmc-supply = <&pm8953_l5>;
 213
 214         status = "okay";
 215 };
 216
 217 &sdhc_2 {
 218         vmmc-supply = <&pm8953_l11>;
 219         vqmmc-supply = <&pm8953_l12>;
 220
 221         pinctrl-names = "default", "sleep";
 222         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
 223         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 224
 225         status = "okay";
 226 };
 227
 228 &tlmm {
 229         gpio-reserved-ranges = <95 5>, <111 1>, <126 1>;
 230
 231         ts_int_active: ts-int-active-state {
 232                 pins = "gpio65";
 233                 function = "gpio";
 234                 drive-strength = <8>;
 235                 bias-pull-up;
 236         };
 237
 238         ts_reset_active: ts-reset-active-state {
 239                 pins = "gpio64";
 240                 function = "gpio";
 241                 drive-strength = <0x08>;
 242                 bias-pull-up;
 243         };
 244 };
 245
 246 &usb3 {
 247         status = "okay";
 248 };
 249
 250 &usb3_dwc3 {
 251         dr_mode = "peripheral";
 252 };