arch/arm64/boot/dts/qcom/msm8953.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
   3
   4 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/interrupt-controller/arm-gic.h>
   7 #include <dt-bindings/power/qcom-rpmpd.h>
   8 #include <dt-bindings/thermal/thermal.h>
   9
  10 / {
  11         interrupt-parent = <&intc>;
  12
  13         #address-cells = <2>;
  14         #size-cells = <2>;
  15
  16         chosen { };
  17
  18         clocks {
  19                 sleep_clk: sleep-clk {
  20                         compatible = "fixed-clock";
  21                         #clock-cells = <0>;
  22                         clock-frequency = <32768>;
  23                 };
  24
  25                 xo_board: xo-board {
  26                         compatible = "fixed-clock";
  27                         #clock-cells = <0>;
  28                         clock-frequency = <19200000>;
  29                         clock-output-names = "xo";
  30                 };
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 CPU0: cpu@0 {
  38                         device_type = "cpu";
  39                         compatible = "arm,cortex-a53";
  40                         reg = <0x0>;
  41                         enable-method = "psci";
  42                         capacity-dmips-mhz = <1024>;
  43                         next-level-cache = <&L2_0>;
  44                         #cooling-cells = <2>;
  45
  46                         l1-icache {
  47                                 compatible = "cache";
  48                         };
  49                         l1-dcache {
  50                                 compatible = "cache";
  51                         };
  52                 };
  53
  54                 CPU1: cpu@1 {
  55                         device_type = "cpu";
  56                         compatible = "arm,cortex-a53";
  57                         reg = <0x1>;
  58                         enable-method = "psci";
  59                         capacity-dmips-mhz = <1024>;
  60                         next-level-cache = <&L2_0>;
  61                         #cooling-cells = <2>;
  62
  63                         l1-icache {
  64                                 compatible = "cache";
  65                         };
  66                         l1-dcache {
  67                                 compatible = "cache";
  68                         };
  69                 };
  70
  71                 CPU2: cpu@2 {
  72                         device_type = "cpu";
  73                         compatible = "arm,cortex-a53";
  74                         reg = <0x2>;
  75                         enable-method = "psci";
  76                         capacity-dmips-mhz = <1024>;
  77                         next-level-cache = <&L2_0>;
  78                         #cooling-cells = <2>;
  79
  80                         l1-icache {
  81                                 compatible = "cache";
  82                         };
  83                         l1-dcache {
  84                                 compatible = "cache";
  85                         };
  86                 };
  87
  88                 CPU3: cpu@3 {
  89                         device_type = "cpu";
  90                         compatible = "arm,cortex-a53";
  91                         reg = <0x3>;
  92                         enable-method = "psci";
  93                         capacity-dmips-mhz = <1024>;
  94                         next-level-cache = <&L2_0>;
  95                         #cooling-cells = <2>;
  96
  97                         l1-icache {
  98                                 compatible = "cache";
  99                         };
 100                         l1-dcache {
 101                                 compatible = "cache";
 102                         };
 103                 };
 104
 105                 CPU4: cpu@100 {
 106                         device_type = "cpu";
 107                         compatible = "arm,cortex-a53";
 108                         reg = <0x100>;
 109                         enable-method = "psci";
 110                         capacity-dmips-mhz = <1024>;
 111                         next-level-cache = <&L2_1>;
 112                         #cooling-cells = <2>;
 113
 114                         l1-icache {
 115                                 compatible = "cache";
 116                         };
 117                         l1-dcache {
 118                                 compatible = "cache";
 119                         };
 120                 };
 121
 122                 CPU5: cpu@101 {
 123                         device_type = "cpu";
 124                         compatible = "arm,cortex-a53";
 125                         reg = <0x101>;
 126                         enable-method = "psci";
 127                         capacity-dmips-mhz = <1024>;
 128                         next-level-cache = <&L2_1>;
 129                         #cooling-cells = <2>;
 130
 131                         l1-icache {
 132                                 compatible = "cache";
 133                         };
 134                         l1-dcache {
 135                                 compatible = "cache";
 136                         };
 137                 };
 138
 139                 CPU6: cpu@102 {
 140                         device_type = "cpu";
 141                         compatible = "arm,cortex-a53";
 142                         reg = <0x102>;
 143                         enable-method = "psci";
 144                         capacity-dmips-mhz = <1024>;
 145                         next-level-cache = <&L2_1>;
 146                         #cooling-cells = <2>;
 147
 148                         l1-icache {
 149                                 compatible = "cache";
 150                         };
 151                         l1-dcache {
 152                                 compatible = "cache";
 153                         };
 154                 };
 155
 156                 CPU7: cpu@103 {
 157                         device_type = "cpu";
 158                         compatible = "arm,cortex-a53";
 159                         reg = <0x103>;
 160                         enable-method = "psci";
 161                         capacity-dmips-mhz = <1024>;
 162                         next-level-cache = <&L2_1>;
 163                         #cooling-cells = <2>;
 164
 165                         l1-icache {
 166                                 compatible = "cache";
 167                         };
 168                         l1-dcache {
 169                                 compatible = "cache";
 170                         };
 171                 };
 172
 173                 cpu-map {
 174                         cluster0 {
 175                                 core0 {
 176                                         cpu = <&CPU0>;
 177                                 };
 178                                 core1 {
 179                                         cpu = <&CPU1>;
 180                                 };
 181                                 core2 {
 182                                         cpu = <&CPU2>;
 183                                 };
 184                                 core3 {
 185                                         cpu = <&CPU3>;
 186                                 };
 187                         };
 188
 189                         cluster1 {
 190                                 core0 {
 191                                         cpu = <&CPU4>;
 192                                 };
 193                                 core1 {
 194                                         cpu = <&CPU5>;
 195                                 };
 196                                 core2 {
 197                                         cpu = <&CPU6>;
 198                                 };
 199                                 core3 {
 200                                         cpu = <&CPU7>;
 201                                 };
 202                         };
 203                 };
 204
 205                 L2_0: l2-cache_0 {
 206                         compatible = "cache";
 207                         cache-level = <2>;
 208                 };
 209
 210                 L2_1: l2-cache_1 {
 211                         compatible = "cache";
 212                         cache-level = <2>;
 213                 };
 214         };
 215
 216         firmware {
 217                 scm: scm {
 218                         compatible = "qcom,scm-msm8953";
 219                         clocks = <&gcc GCC_CRYPTO_CLK>,
 220                                  <&gcc GCC_CRYPTO_AXI_CLK>,
 221                                  <&gcc GCC_CRYPTO_AHB_CLK>;
 222                         clock-names = "core", "bus", "iface";
 223                         #reset-cells = <1>;
 224                 };
 225         };
 226
 227         memory {
 228                 device_type = "memory";
 229                 /* We expect the bootloader to fill in the reg */
 230                 reg = <0 0 0 0>;
 231         };
 232
 233         pmu {
 234                 compatible = "arm,cortex-a53-pmu";
 235                 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 236         };
 237
 238         psci {
 239                 compatible = "arm,psci-1.0";
 240                 method = "smc";
 241         };
 242
 243         reserved-memory {
 244                 #address-cells = <2>;
 245                 #size-cells = <2>;
 246                 ranges;
 247
 248                 zap_shader_region: memory@81800000 {
 249                         compatible = "shared-dma-pool";
 250                         reg = <0x0 0x81800000 0x0 0x2000>;
 251                         no-map;
 252                 };
 253
 254                 memory@85b00000 {
 255                         reg = <0x0 0x85b00000 0x0 0x800000>;
 256                         no-map;
 257                 };
 258
 259                 smem_mem: memory@86300000 {
 260                         compatible = "qcom,smem";
 261                         reg = <0x0 0x86300000 0x0 0x100000>;
 262                         qcom,rpm-msg-ram = <&rpm_msg_ram>;
 263                         hwlocks = <&tcsr_mutex 3>;
 264                         no-map;
 265                 };
 266
 267                 memory@86400000 {
 268                         reg = <0x0 0x86400000 0x0 0x400000>;
 269                         no-map;
 270                 };
 271
 272                 mpss_mem: memory@86c00000 {
 273                         reg = <0x0 0x86c00000 0x0 0x6a00000>;
 274                         no-map;
 275                 };
 276
 277                 adsp_fw_mem: memory@8d600000 {
 278                         reg = <0x0 0x8d600000 0x0 0x1100000>;
 279                         no-map;
 280                 };
 281
 282                 wcnss_fw_mem: memory@8e700000 {
 283                         reg = <0x0 0x8e700000 0x0 0x700000>;
 284                         no-map;
 285                 };
 286
 287                 memory@90000000 {
 288                         reg = <0 0x90000000 0 0x1000>;
 289                         no-map;
 290                 };
 291
 292                 memory@90001000 {
 293                         reg = <0x0 0x90001000 0x0 0x13ff000>;
 294                         no-map;
 295                 };
 296
 297                 venus_mem: memory@91400000 {
 298                         reg = <0x0 0x91400000 0x0 0x700000>;
 299                         no-map;
 300                 };
 301
 302                 mba_mem: memory@92000000 {
 303                         reg = <0x0 0x92000000 0x0 0x100000>;
 304                         no-map;
 305                 };
 306
 307                 memory@f2d00000 {
 308                         compatible = "qcom,rmtfs-mem";
 309                         reg = <0x0 0xf2d00000 0x0 0x180000>;
 310                         no-map;
 311
 312                         qcom,client-id = <1>;
 313                 };
 314         };
 315
 316         smd {
 317                 compatible = "qcom,smd";
 318
 319                 rpm {
 320                         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 321                         qcom,ipc = <&apcs 8 0>;
 322                         qcom,smd-edge = <15>;
 323
 324                         rpm_requests: rpm-requests {
 325                                 compatible = "qcom,rpm-msm8953";
 326                                 qcom,smd-channels = "rpm_requests";
 327
 328                                 rpmcc: rpmcc {
 329                                         compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
 330                                         clocks = <&xo_board>;
 331                                         clock-names = "xo";
 332                                         #clock-cells = <1>;
 333                                 };
 334
 335                                 rpmpd: power-controller {
 336                                         compatible = "qcom,msm8953-rpmpd";
 337                                         #power-domain-cells = <1>;
 338                                         operating-points-v2 = <&rpmpd_opp_table>;
 339
 340                                         clocks = <&xo_board>;
 341                                         clock-names = "ref";
 342
 343                                         rpmpd_opp_table: opp-table {
 344                                                 compatible = "operating-points-v2";
 345
 346                                                 rpmpd_opp_ret: opp1 {
 347                                                         opp-level = <RPM_SMD_LEVEL_RETENTION>;
 348                                                 };
 349
 350                                                 rpmpd_opp_ret_plus: opp2 {
 351                                                         opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
 352                                                 };
 353
 354                                                 rpmpd_opp_min_svs: opp3 {
 355                                                         opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
 356                                                 };
 357
 358                                                 rpmpd_opp_low_svs: opp4 {
 359                                                         opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
 360                                                 };
 361
 362                                                 rpmpd_opp_svs: opp5 {
 363                                                         opp-level = <RPM_SMD_LEVEL_SVS>;
 364                                                 };
 365
 366                                                 rpmpd_opp_svs_plus: opp6 {
 367                                                         opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
 368                                                 };
 369
 370                                                 rpmpd_opp_nom: opp7 {
 371                                                         opp-level = <RPM_SMD_LEVEL_NOM>;
 372                                                 };
 373
 374                                                 rpmpd_opp_nom_plus: opp8 {
 375                                                         opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
 376                                                 };
 377
 378                                                 rpmpd_opp_turbo: opp9 {
 379                                                         opp-level = <RPM_SMD_LEVEL_TURBO>;
 380                                                 };
 381                                         };
 382                                 };
 383                         };
 384                 };
 385         };
 386
 387         smsm {
 388                 compatible = "qcom,smsm";
 389
 390                 #address-cells = <1>;
 391                 #size-cells = <0>;
 392
 393                 qcom,ipc-1 = <&apcs 8 13>;
 394                 qcom,ipc-3 = <&apcs 8 19>;
 395
 396                 apps_smsm: apps@0 {
 397                         reg = <0>;
 398
 399                         #qcom,smem-state-cells = <1>;
 400                 };
 401         };
 402
 403         soc: soc@0 {
 404                 #address-cells = <1>;
 405                 #size-cells = <1>;
 406                 ranges = <0 0 0 0xffffffff>;
 407                 compatible = "simple-bus";
 408
 409                 rpm_msg_ram: sram@60000 {
 410                         compatible = "qcom,rpm-msg-ram";
 411                         reg = <0x60000 0x8000>;
 412                 };
 413
 414                 hsusb_phy: phy@79000 {
 415                         compatible = "qcom,msm8953-qusb2-phy";
 416                         reg = <0x79000 0x180>;
 417                         #phy-cells = <0>;
 418
 419                         clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
 420                                  <&gcc GCC_QUSB_REF_CLK>;
 421                         clock-names = "cfg_ahb", "ref";
 422
 423                         qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
 424
 425                         resets = <&gcc GCC_QUSB2_PHY_BCR>;
 426
 427                         status = "disabled";
 428                 };
 429
 430                 rng@e3000 {
 431                         compatible = "qcom,prng";
 432                         reg = <0x000e3000 0x1000>;
 433                         clocks = <&gcc GCC_PRNG_AHB_CLK>;
 434                         clock-names = "core";
 435                 };
 436
 437                 tsens0: thermal-sensor@4a9000 {
 438                         compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
 439                         reg = <0x4a9000 0x1000>, /* TM */
 440                               <0x4a8000 0x1000>; /* SROT */
 441                         #qcom,sensors = <16>;
 442                         interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
 443                                      <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
 444                         interrupt-names = "uplow", "critical";
 445                         #thermal-sensor-cells = <1>;
 446                 };
 447
 448                 restart@4ab000 {
 449                         compatible = "qcom,pshold";
 450                         reg = <0x4ab000 0x4>;
 451                 };
 452
 453                 tlmm: pinctrl@1000000 {
 454                         compatible = "qcom,msm8953-pinctrl";
 455                         reg = <0x1000000 0x300000>;
 456                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 457                         gpio-controller;
 458                         gpio-ranges = <&tlmm 0 0 155>;
 459                         #gpio-cells = <2>;
 460                         interrupt-controller;
 461                         #interrupt-cells = <2>;
 462
 463                         uart_console_active: uart-console-active-pins {
 464                                 pins = "gpio4", "gpio5";
 465                                 function = "blsp_uart2";
 466                                 drive-strength = <2>;
 467                                 bias-disable;
 468                         };
 469
 470                         uart_console_sleep: uart-console-sleep-pins {
 471                                 pins = "gpio4", "gpio5";
 472                                 function = "blsp_uart2";
 473                                 drive-strength = <2>;
 474                                 bias-pull-down;
 475                         };
 476
 477                         sdc1_clk_on: sdc1-clk-on-pins {
 478                                 pins = "sdc1_clk";
 479                                 bias-disable;
 480                                 drive-strength = <16>;
 481                         };
 482
 483                         sdc1_clk_off: sdc1-clk-off-pins {
 484                                 pins = "sdc1_clk";
 485                                 bias-disable;
 486                                 drive-strength = <2>;
 487                         };
 488
 489                         sdc1_cmd_on: sdc1-cmd-on-pins {
 490                                 pins = "sdc1_cmd";
 491                                 bias-disable;
 492                                 drive-strength = <10>;
 493                         };
 494
 495                         sdc1_cmd_off: sdc1-cmd-off-pins {
 496                                 pins = "sdc1_cmd";
 497                                 bias-disable;
 498                                 drive-strength = <2>;
 499                         };
 500
 501                         sdc1_data_on: sdc1-data-on-pins {
 502                                 pins = "sdc1_data";
 503                                 bias-pull-up;
 504                                 drive-strength = <10>;
 505                         };
 506
 507                         sdc1_data_off: sdc1-data-off-pins {
 508                                 pins = "sdc1_data";
 509                                 bias-pull-up;
 510                                 drive-strength = <2>;
 511                         };
 512
 513                         sdc1_rclk_on: sdc1-rclk-on-pins {
 514                                 pins = "sdc1_rclk";
 515                                 bias-pull-down;
 516                         };
 517
 518                         sdc1_rclk_off: sdc1-rclk-off-pins {
 519                                 pins = "sdc1_rclk";
 520                                 bias-pull-down;
 521                         };
 522
 523                         sdc2_clk_on: sdc2-clk-on-pins {
 524                                 pins = "sdc2_clk";
 525                                 drive-strength = <16>;
 526                                 bias-disable;
 527                         };
 528
 529                         sdc2_clk_off: sdc2-clk-off-pins {
 530                                 pins = "sdc2_clk";
 531                                 bias-disable;
 532                                 drive-strength = <2>;
 533                         };
 534
 535                         sdc2_cmd_on: sdc2-cmd-on-pins {
 536                                 pins = "sdc2_cmd";
 537                                 bias-pull-up;
 538                                 drive-strength = <10>;
 539                         };
 540
 541                         sdc2_cmd_off: sdc2-cmd-off-pins {
 542                                 pins = "sdc2_cmd";
 543                                 bias-pull-up;
 544                                 drive-strength = <2>;
 545                         };
 546
 547                         sdc2_data_on: sdc2-data-on-pins {
 548                                 pins = "sdc2_data";
 549                                 bias-pull-up;
 550                                 drive-strength = <10>;
 551                         };
 552
 553                         sdc2_data_off: sdc2-data-off-pins {
 554                                 pins = "sdc2_data";
 555                                 bias-pull-up;
 556                                 drive-strength = <2>;
 557                         };
 558
 559                         sdc2_cd_on: cd-on-pins {
 560                                 pins = "gpio133";
 561                                 function = "gpio";
 562                                 drive-strength = <2>;
 563                                 bias-pull-up;
 564                         };
 565
 566                         sdc2_cd_off: cd-off-pins {
 567                                 pins = "gpio133";
 568                                 function = "gpio";
 569                                 drive-strength = <2>;
 570                                 bias-disable;
 571                         };
 572
 573                         gpio_key_default: gpio-key-default-pins {
 574                                 pins = "gpio85";
 575                                 function = "gpio";
 576                                 drive-strength = <2>;
 577                                 bias-pull-up;
 578                         };
 579
 580                         i2c_1_default: i2c-1-default-pins {
 581                                 pins = "gpio2", "gpio3";
 582                                 function = "blsp_i2c1";
 583                                 drive-strength = <2>;
 584                                 bias-disable;
 585                         };
 586
 587                         i2c_1_sleep: i2c-1-sleep-pins {
 588                                 pins = "gpio2", "gpio3";
 589                                 function = "gpio";
 590                                 drive-strength = <2>;
 591                                 bias-disable;
 592                         };
 593
 594                         i2c_2_default: i2c-2-default-pins {
 595                                 pins = "gpio6", "gpio7";
 596                                 function = "blsp_i2c2";
 597                                 drive-strength = <2>;
 598                                 bias-disable;
 599                         };
 600
 601                         i2c_2_sleep: i2c-2-sleep-pins {
 602                                 pins = "gpio6", "gpio7";
 603                                 function = "gpio";
 604                                 drive-strength = <2>;
 605                                 bias-disable;
 606                         };
 607
 608                         i2c_3_default: i2c-3-default-pins {
 609                                 pins = "gpio10", "gpio11";
 610                                 function = "blsp_i2c3";
 611                                 drive-strength = <2>;
 612                                 bias-disable;
 613                         };
 614
 615                         i2c_3_sleep: i2c-3-sleep-pins {
 616                                 pins = "gpio10", "gpio11";
 617                                 function = "gpio";
 618                                 drive-strength = <2>;
 619                                 bias-disable;
 620                         };
 621
 622                         i2c_4_default: i2c-4-default-pins {
 623                                 pins = "gpio14", "gpio15";
 624                                 function = "blsp_i2c4";
 625                                 drive-strength = <2>;
 626                                 bias-disable;
 627                         };
 628
 629                         i2c_4_sleep: i2c-4-sleep-pins {
 630                                 pins = "gpio14", "gpio15";
 631                                 function = "gpio";
 632                                 drive-strength = <2>;
 633                                 bias-disable;
 634                         };
 635
 636                         i2c_5_default: i2c-5-default-pins {
 637                                 pins = "gpio18", "gpio19";
 638                                 function = "blsp_i2c5";
 639                                 drive-strength = <2>;
 640                                 bias-disable;
 641                         };
 642
 643                         i2c_5_sleep: i2c-5-sleep-pins {
 644                                 pins = "gpio18", "gpio19";
 645                                 function = "gpio";
 646                                 drive-strength = <2>;
 647                                 bias-disable;
 648                         };
 649
 650                         i2c_6_default: i2c-6-default-pins {
 651                                 pins = "gpio22", "gpio23";
 652                                 function = "blsp_i2c6";
 653                                 drive-strength = <2>;
 654                                 bias-disable;
 655                         };
 656
 657                         i2c_6_sleep: i2c-6-sleep-pins {
 658                                 pins = "gpio22", "gpio23";
 659                                 function = "gpio";
 660                                 drive-strength = <2>;
 661                                 bias-disable;
 662                         };
 663
 664                         i2c_7_default: i2c-7-default-pins {
 665                                 pins = "gpio135", "gpio136";
 666                                 function = "blsp_i2c7";
 667                                 drive-strength = <2>;
 668                                 bias-disable;
 669                         };
 670
 671                         i2c_7_sleep: i2c-7-sleep-pins {
 672                                 pins = "gpio135", "gpio136";
 673                                 function = "gpio";
 674                                 drive-strength = <2>;
 675                                 bias-disable;
 676                         };
 677
 678                         i2c_8_default: i2c-8-default-pins {
 679                                 pins = "gpio98", "gpio99";
 680                                 function = "blsp_i2c8";
 681                                 drive-strength = <2>;
 682                                 bias-disable;
 683                         };
 684
 685                         i2c_8_sleep: i2c-8-sleep-pins {
 686                                 pins = "gpio98", "gpio99";
 687                                 function = "gpio";
 688                                 drive-strength = <2>;
 689                                 bias-disable;
 690                         };
 691                 };
 692
 693                 gcc: clock-controller@1800000 {
 694                         compatible = "qcom,gcc-msm8953";
 695                         reg = <0x1800000 0x80000>;
 696                         #clock-cells = <1>;
 697                         #reset-cells = <1>;
 698                         #power-domain-cells = <1>;
 699                         clocks = <&xo_board>,
 700                                  <&sleep_clk>,
 701                                  <0>,
 702                                  <0>,
 703                                  <0>,
 704                                  <0>;
 705                         clock-names = "xo",
 706                                       "sleep",
 707                                       "dsi0pll",
 708                                       "dsi0pllbyte",
 709                                       "dsi1pll",
 710                                       "dsi1pllbyte";
 711                 };
 712
 713                 tcsr_mutex: hwlock@1905000 {
 714                         compatible = "qcom,tcsr-mutex";
 715                         reg = <0x1905000 0x20000>;
 716                         #hwlock-cells = <1>;
 717                 };
 718
 719                 tcsr: syscon@1937000 {
 720                         compatible = "qcom,tcsr-msm8953", "syscon";
 721                         reg = <0x1937000 0x30000>;
 722                 };
 723
 724                 tcsr_phy_clk_scheme_sel: syscon@193f044 {
 725                         compatible = "syscon";
 726                         reg = <0x193f044 0x4>;
 727                 };
 728
 729                 spmi_bus: spmi@200f000 {
 730                         compatible = "qcom,spmi-pmic-arb";
 731                         reg = <0x200f000 0x1000>,
 732                               <0x2400000 0x800000>,
 733                               <0x2c00000 0x800000>,
 734                               <0x3800000 0x200000>,
 735                               <0x200a000 0x2100>;
 736                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 737                         interrupt-names = "periph_irq";
 738                         interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 739                         qcom,ee = <0>;
 740                         qcom,channel = <0>;
 741                         interrupt-controller;
 742
 743                         #interrupt-cells = <4>;
 744                         #address-cells = <2>;
 745                         #size-cells = <0>;
 746                 };
 747
 748                 usb3: usb@70f8800 {
 749                         compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
 750                         reg = <0x70f8800 0x400>;
 751                         #address-cells = <1>;
 752                         #size-cells = <1>;
 753                         ranges;
 754
 755                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 756                                      <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 757                         interrupt-names = "hs_phy_irq", "ss_phy_irq";
 758
 759                         clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
 760                                  <&gcc GCC_USB30_MASTER_CLK>,
 761                                  <&gcc GCC_PCNOC_USB3_AXI_CLK>,
 762                                  <&gcc GCC_USB30_SLEEP_CLK>,
 763                                  <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 764                         clock-names = "cfg_noc",
 765                                       "core",
 766                                       "iface",
 767                                       "sleep",
 768                                       "mock_utmi";
 769
 770                         assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 771                                           <&gcc GCC_USB30_MASTER_CLK>;
 772                         assigned-clock-rates = <19200000>, <133330000>;
 773
 774                         power-domains = <&gcc USB30_GDSC>;
 775
 776                         qcom,select-utmi-as-pipe-clk;
 777
 778                         status = "disabled";
 779
 780                         usb3_dwc3: usb@7000000 {
 781                                 compatible = "snps,dwc3";
 782                                 reg = <0x07000000 0xcc00>;
 783                                 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 784                                 phys = <&hsusb_phy>;
 785                                 phy-names = "usb2-phy";
 786
 787                                 snps,usb2-gadget-lpm-disable;
 788                                 snps,dis-u1-entry-quirk;
 789                                 snps,dis-u2-entry-quirk;
 790                                 snps,is-utmi-l1-suspend;
 791                                 snps,hird-threshold = /bits/ 8 <0x00>;
 792
 793                                 maximum-speed = "high-speed";
 794                                 phy_mode = "utmi";
 795                         };
 796                 };
 797
 798                 sdhc_1: sdhci@7824900 {
 799                         compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 800
 801                         reg = <0x7824900 0x500>, <0x7824000 0x800>;
 802                         reg-names = "hc_mem", "core_mem";
 803
 804                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 805                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 806                         interrupt-names = "hc_irq", "pwr_irq";
 807
 808                         clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 809                                  <&gcc GCC_SDCC1_APPS_CLK>,
 810                                  <&xo_board>;
 811                         clock-names = "iface", "core", "xo";
 812
 813                         power-domains = <&rpmpd MSM8953_VDDCX>;
 814                         operating-points-v2 = <&sdhc1_opp_table>;
 815
 816                         pinctrl-names = "default", "sleep";
 817                         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
 818                         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
 819
 820                         mmc-hs400-1_8v;
 821                         mmc-hs200-1_8v;
 822                         mmc-ddr-1_8v;
 823                         bus-width = <8>;
 824                         non-removable;
 825
 826                         status = "disabled";
 827
 828                         sdhc1_opp_table: opp-table-sdhc1 {
 829                                 compatible = "operating-points-v2";
 830
 831                                 opp-25000000 {
 832                                         opp-hz = /bits/ 64 <25000000>;
 833                                         required-opps = <&rpmpd_opp_low_svs>;
 834                                 };
 835
 836                                 opp-50000000 {
 837                                         opp-hz = /bits/ 64 <50000000>;
 838                                         required-opps = <&rpmpd_opp_svs>;
 839                                 };
 840
 841                                 opp-100000000 {
 842                                         opp-hz = /bits/ 64 <100000000>;
 843                                         required-opps = <&rpmpd_opp_svs>;
 844                                 };
 845
 846                                 opp-192000000 {
 847                                         opp-hz = /bits/ 64 <192000000>;
 848                                         required-opps = <&rpmpd_opp_nom>;
 849                                 };
 850
 851                                 opp-384000000 {
 852                                         opp-hz = /bits/ 64 <384000000>;
 853                                         required-opps = <&rpmpd_opp_nom>;
 854                                 };
 855                         };
 856                 };
 857
 858                 sdhc_2: sdhci@7864900 {
 859                         compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
 860
 861                         reg = <0x7864900 0x500>, <0x7864000 0x800>;
 862                         reg-names = "hc_mem", "core_mem";
 863
 864                         interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 865                                      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 866                         interrupt-names = "hc_irq", "pwr_irq";
 867
 868                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 869                                  <&gcc GCC_SDCC2_APPS_CLK>,
 870                                  <&xo_board>;
 871                         clock-names = "iface", "core", "xo";
 872
 873                         power-domains = <&rpmpd MSM8953_VDDCX>;
 874                         operating-points-v2 = <&sdhc2_opp_table>;
 875
 876                         pinctrl-names = "default", "sleep";
 877                         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
 878                         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
 879
 880                         bus-width = <4>;
 881
 882                         status = "disabled";
 883
 884                         sdhc2_opp_table: opp-table-sdhc2 {
 885                                 compatible = "operating-points-v2";
 886
 887                                 opp-25000000 {
 888                                         opp-hz = /bits/ 64 <25000000>;
 889                                         required-opps = <&rpmpd_opp_low_svs>;
 890                                 };
 891
 892                                 opp-50000000 {
 893                                         opp-hz = /bits/ 64 <50000000>;
 894                                         required-opps = <&rpmpd_opp_svs>;
 895                                 };
 896
 897                                 opp-100000000 {
 898                                         opp-hz = /bits/ 64 <100000000>;
 899                                         required-opps = <&rpmpd_opp_svs>;
 900                                 };
 901
 902                                 opp-177770000 {
 903                                         opp-hz = /bits/ 64 <177770000>;
 904                                         required-opps = <&rpmpd_opp_nom>;
 905                                 };
 906
 907                                 opp-200000000 {
 908                                         opp-hz = /bits/ 64 <200000000>;
 909                                         required-opps = <&rpmpd_opp_nom>;
 910                                 };
 911                         };
 912                 };
 913
 914                 uart_0: serial@78af000 {
 915                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 916                         reg = <0x78af000 0x200>;
 917                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 918                         clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 919                                  <&gcc GCC_BLSP1_AHB_CLK>;
 920                         clock-names = "core", "iface";
 921
 922                         status = "disabled";
 923                 };
 924
 925                 i2c_1: i2c@78b5000 {
 926                         compatible = "qcom,i2c-qup-v2.2.1";
 927                         reg = <0x78b5000 0x600>;
 928                         interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 929                         clock-names = "core", "iface";
 930                         clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
 931                                  <&gcc GCC_BLSP1_AHB_CLK>;
 932
 933                         pinctrl-names = "default", "sleep";
 934                         pinctrl-0 = <&i2c_1_default>;
 935                         pinctrl-1 = <&i2c_1_sleep>;
 936
 937                         #address-cells = <1>;
 938                         #size-cells = <0>;
 939
 940                         status = "disabled";
 941                 };
 942
 943                 i2c_2: i2c@78b6000 {
 944                         compatible = "qcom,i2c-qup-v2.2.1";
 945                         reg = <0x78b6000 0x600>;
 946                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 947                         clock-names = "core", "iface";
 948                         clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
 949                                  <&gcc GCC_BLSP1_AHB_CLK>;
 950
 951                         pinctrl-names = "default", "sleep";
 952                         pinctrl-0 = <&i2c_2_default>;
 953                         pinctrl-1 = <&i2c_2_sleep>;
 954
 955                         #address-cells = <1>;
 956                         #size-cells = <0>;
 957
 958                         status = "disabled";
 959                 };
 960
 961                 i2c_3: i2c@78b7000 {
 962                         compatible = "qcom,i2c-qup-v2.2.1";
 963                         reg = <0x78b7000 0x600>;
 964                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 965                         clock-names = "core", "iface";
 966                         clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
 967                                  <&gcc GCC_BLSP1_AHB_CLK>;
 968                         pinctrl-names = "default", "sleep";
 969                         pinctrl-0 = <&i2c_3_default>;
 970                         pinctrl-1 = <&i2c_3_sleep>;
 971
 972                         #address-cells = <1>;
 973                         #size-cells = <0>;
 974
 975                         status = "disabled";
 976                 };
 977
 978                 i2c_4: i2c@78b8000 {
 979                         compatible = "qcom,i2c-qup-v2.2.1";
 980                         reg = <0x78b8000 0x600>;
 981                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 982                         clock-names = "core", "iface";
 983                         clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
 984                                  <&gcc GCC_BLSP1_AHB_CLK>;
 985                         pinctrl-names = "default", "sleep";
 986                         pinctrl-0 = <&i2c_4_default>;
 987                         pinctrl-1 = <&i2c_4_sleep>;
 988
 989                         #address-cells = <1>;
 990                         #size-cells = <0>;
 991
 992                         status = "disabled";
 993                 };
 994
 995                 i2c_5: i2c@7af5000 {
 996                         compatible = "qcom,i2c-qup-v2.2.1";
 997                         reg = <0x7af5000 0x600>;
 998                         interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
 999                         clock-names = "core", "iface";
1000                         clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
1001                                  <&gcc GCC_BLSP2_AHB_CLK>;
1002                         pinctrl-names = "default", "sleep";
1003                         pinctrl-0 = <&i2c_5_default>;
1004                         pinctrl-1 = <&i2c_5_sleep>;
1005
1006                         #address-cells = <1>;
1007                         #size-cells = <0>;
1008
1009                         status = "disabled";
1010                 };
1011
1012                 i2c_6: i2c@7af6000 {
1013                         compatible = "qcom,i2c-qup-v2.2.1";
1014                         reg = <0x7af6000 0x600>;
1015                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
1016                         clock-names = "core", "iface";
1017                         clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
1018                                  <&gcc GCC_BLSP2_AHB_CLK>;
1019                         pinctrl-names = "default", "sleep";
1020                         pinctrl-0 = <&i2c_6_default>;
1021                         pinctrl-1 = <&i2c_6_sleep>;
1022
1023                         #address-cells = <1>;
1024                         #size-cells = <0>;
1025
1026                         status = "disabled";
1027                 };
1028
1029                 i2c_7: i2c@7af7000 {
1030                         compatible = "qcom,i2c-qup-v2.2.1";
1031                         reg = <0x7af7000 0x600>;
1032                         interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
1033                         clock-names = "core", "iface";
1034                         clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
1035                                  <&gcc GCC_BLSP2_AHB_CLK>;
1036                         pinctrl-names = "default", "sleep";
1037                         pinctrl-0 = <&i2c_7_default>;
1038                         pinctrl-1 = <&i2c_7_sleep>;
1039
1040                         #address-cells = <1>;
1041                         #size-cells = <0>;
1042
1043                         status = "disabled";
1044                 };
1045
1046                 i2c_8: i2c@7af8000 {
1047                         compatible = "qcom,i2c-qup-v2.2.1";
1048                         reg = <0x7af8000 0x600>;
1049                         interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
1050                         clock-names = "core", "iface";
1051                         clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
1052                                  <&gcc GCC_BLSP2_AHB_CLK>;
1053                         pinctrl-names = "default", "sleep";
1054                         pinctrl-0 = <&i2c_8_default>;
1055                         pinctrl-1 = <&i2c_8_sleep>;
1056
1057                         #address-cells = <1>;
1058                         #size-cells = <0>;
1059
1060                         status = "disabled";
1061                 };
1062
1063                 intc: interrupt-controller@b000000 {
1064                         compatible = "qcom,msm-qgic2";
1065                         interrupt-controller;
1066                         #interrupt-cells = <3>;
1067                         reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
1068                 };
1069
1070                 apcs: mailbox@b011000 {
1071                         compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
1072                         reg = <0xb011000 0x1000>;
1073                         #mbox-cells = <1>;
1074                 };
1075
1076                 timer@b120000 {
1077                         compatible = "arm,armv7-timer-mem";
1078                         reg = <0xb120000 0x1000>;
1079                         #address-cells = <0x01>;
1080                         #size-cells = <0x01>;
1081                         ranges;
1082
1083                         frame@b121000 {
1084                                 frame-number = <0>;
1085                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1086                                              <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1087                                 reg = <0xb121000 0x1000>,
1088                                       <0xb122000 0x1000>;
1089                         };
1090
1091                         frame@b123000 {
1092                                 frame-number = <1>;
1093                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1094                                 reg = <0xb123000 0x1000>;
1095                                 status = "disabled";
1096                         };
1097
1098                         frame@b124000 {
1099                                 frame-number = <2>;
1100                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1101                                 reg = <0xb124000 0x1000>;
1102                                 status = "disabled";
1103                         };
1104
1105                         frame@b125000 {
1106                                 frame-number = <3>;
1107                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1108                                 reg = <0xb125000 0x1000>;
1109                                 status = "disabled";
1110                         };
1111
1112                         frame@b126000 {
1113                                 frame-number = <4>;
1114                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1115                                 reg = <0xb126000 0x1000>;
1116                                 status = "disabled";
1117                         };
1118
1119                         frame@b127000 {
1120                                 frame-number = <5>;
1121                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1122                                 reg = <0xb127000 0x1000>;
1123                                 status = "disabled";
1124                         };
1125
1126                         frame@b128000 {
1127                                 frame-number = <6>;
1128                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1129                                 reg = <0xb128000 0x1000>;
1130                                 status = "disabled";
1131                         };
1132                 };
1133         };
1134
1135         thermal-zones {
1136                 cpu0-thermal {
1137                         polling-delay-passive = <250>;
1138                         polling-delay = <1000>;
1139                         thermal-sensors = <&tsens0 9>;
1140                         trips {
1141                                 cpu0_alert: trip-point0 {
1142                                         temperature = <80000>;
1143                                         hysteresis = <2000>;
1144                                         type = "passive";
1145                                 };
1146                                 cpu0_crit: crit {
1147                                         temperature = <100000>;
1148                                         hysteresis = <2000>;
1149                                         type = "critical";
1150                                 };
1151                         };
1152                         cooling-maps {
1153                                 map0 {
1154                                         trip = <&cpu0_alert>;
1155                                         cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1156                                 };
1157                         };
1158                 };
1159                 cpu1-thermal {
1160                         polling-delay-passive = <250>;
1161                         polling-delay = <1000>;
1162                         thermal-sensors = <&tsens0 10>;
1163                         trips {
1164                                 cpu1_alert: trip-point0 {
1165                                         temperature = <80000>;
1166                                         hysteresis = <2000>;
1167                                         type = "passive";
1168                                 };
1169                                 cpu1_crit: crit {
1170                                         temperature = <100000>;
1171                                         hysteresis = <2000>;
1172                                         type = "critical";
1173                                 };
1174                         };
1175                         cooling-maps {
1176                                 map0 {
1177                                         trip = <&cpu1_alert>;
1178                                         cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1179                                 };
1180                         };
1181                 };
1182                 cpu2-thermal {
1183                         polling-delay-passive = <250>;
1184                         polling-delay = <1000>;
1185                         thermal-sensors = <&tsens0 11>;
1186                         trips {
1187                                 cpu2_alert: trip-point0 {
1188                                         temperature = <80000>;
1189                                         hysteresis = <2000>;
1190                                         type = "passive";
1191                                 };
1192                                 cpu2_crit: crit {
1193                                         temperature = <100000>;
1194                                         hysteresis = <2000>;
1195                                         type = "critical";
1196                                 };
1197                         };
1198                         cooling-maps {
1199                                 map0 {
1200                                         trip = <&cpu2_alert>;
1201                                         cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1202                                 };
1203                         };
1204                 };
1205                 cpu3-thermal {
1206                         polling-delay-passive = <250>;
1207                         polling-delay = <1000>;
1208                         thermal-sensors = <&tsens0 12>;
1209                         trips {
1210                                 cpu3_alert: trip-point0 {
1211                                         temperature = <80000>;
1212                                         hysteresis = <2000>;
1213                                         type = "passive";
1214                                 };
1215                                 cpu3_crit: crit {
1216                                         temperature = <100000>;
1217                                         hysteresis = <2000>;
1218                                         type = "critical";
1219                                 };
1220                         };
1221                         cooling-maps {
1222                                 map0 {
1223                                         trip = <&cpu3_alert>;
1224                                         cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1225                                 };
1226                         };
1227                 };
1228                 cpu4-thermal {
1229                         polling-delay-passive = <250>;
1230                         polling-delay = <1000>;
1231                         thermal-sensors = <&tsens0 4>;
1232                         trips {
1233                                 cpu4_alert: trip-point0 {
1234                                         temperature = <80000>;
1235                                         hysteresis = <2000>;
1236                                         type = "passive";
1237                                 };
1238                                 cpu4_crit: crit {
1239                                         temperature = <100000>;
1240                                         hysteresis = <2000>;
1241                                         type = "critical";
1242                                 };
1243                         };
1244                         cooling-maps {
1245                                 map0 {
1246                                         trip = <&cpu4_alert>;
1247                                         cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1248                                 };
1249                         };
1250                 };
1251                 cpu5-thermal {
1252                         polling-delay-passive = <250>;
1253                         polling-delay = <1000>;
1254                         thermal-sensors = <&tsens0 5>;
1255                         trips {
1256                                 cpu5_alert: trip-point0 {
1257                                         temperature = <80000>;
1258                                         hysteresis = <2000>;
1259                                         type = "passive";
1260                                 };
1261                                 cpu5_crit: crit {
1262                                         temperature = <100000>;
1263                                         hysteresis = <2000>;
1264                                         type = "critical";
1265                                 };
1266                         };
1267                         cooling-maps {
1268                                 map0 {
1269                                         trip = <&cpu5_alert>;
1270                                         cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1271                                 };
1272                         };
1273                 };
1274                 cpu6-thermal {
1275                         polling-delay-passive = <250>;
1276                         polling-delay = <1000>;
1277                         thermal-sensors = <&tsens0 6>;
1278                         trips {
1279                                 cpu6_alert: trip-point0 {
1280                                         temperature = <80000>;
1281                                         hysteresis = <2000>;
1282                                         type = "passive";
1283                                 };
1284                                 cpu6_crit: crit {
1285                                         temperature = <100000>;
1286                                         hysteresis = <2000>;
1287                                         type = "critical";
1288                                 };
1289                         };
1290                         cooling-maps {
1291                                 map0 {
1292                                         trip = <&cpu6_alert>;
1293                                         cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1294                                 };
1295                         };
1296                 };
1297                 cpu7-thermal {
1298                         polling-delay-passive = <250>;
1299                         polling-delay = <1000>;
1300                         thermal-sensors = <&tsens0 7>;
1301                         trips {
1302                                 cpu7_alert: trip-point0 {
1303                                         temperature = <80000>;
1304                                         hysteresis = <2000>;
1305                                         type = "passive";
1306                                 };
1307                                 cpu7_crit: crit {
1308                                         temperature = <100000>;
1309                                         hysteresis = <2000>;
1310                                         type = "critical";
1311                                 };
1312                         };
1313                         cooling-maps {
1314                                 map0 {
1315                                         trip = <&cpu7_alert>;
1316                                         cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1317                                 };
1318                         };
1319                 };
1320         };
1321
1322         timer {
1323                 compatible = "arm,armv8-timer";
1324                 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1325                              <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1326                              <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1327                              <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
1328         };
1329 };