arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts

   1 /*
   2  * Copyright (c) 2017 MediaTek Inc.
   3  * Author: Ming Huang <ming.huang@mediatek.com>
   4  *         Sean Wang <sean.wang@mediatek.com>
   5  *
   6  * SPDX-License-Identifier: (GPL-2.0 OR MIT)
   7  */
   8
   9 /dts-v1/;
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 #include "mt7622.dtsi"
  14 #include "mt6380.dtsi"
  15
  16 / {
  17         model = "MediaTek MT7622 RFB1 board";
  18         compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
  19
  20         aliases {
  21                 serial0 = &uart0;
  22         };
  23
  24         chosen {
  25                 stdout-path = "serial0:115200n8";
  26                 bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
  27         };
  28
  29         cpus {
  30                 cpu@0 {
  31                         proc-supply = <&mt6380_vcpu_reg>;
  32                         sram-supply = <&mt6380_vm_reg>;
  33                 };
  34
  35                 cpu@1 {
  36                         proc-supply = <&mt6380_vcpu_reg>;
  37                         sram-supply = <&mt6380_vm_reg>;
  38                 };
  39         };
  40
  41         gpio-keys {
  42                 compatible = "gpio-keys";
  43
  44                 key-factory {
  45                         label = "factory";
  46                         linux,code = <BTN_0>;
  47                         gpios = <&pio 0 0>;
  48                 };
  49
  50                 key-wps {
  51                         label = "wps";
  52                         linux,code = <KEY_WPS_BUTTON>;
  53                         gpios = <&pio 102 0>;
  54                 };
  55         };
  56
  57         memory {
  58                 reg = <0 0x40000000 0 0x20000000>;
  59         };
  60
  61         reg_1p8v: regulator-1p8v {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "fixed-1.8V";
  64                 regulator-min-microvolt = <1800000>;
  65                 regulator-max-microvolt = <1800000>;
  66                 regulator-always-on;
  67         };
  68
  69         reg_3p3v: regulator-3p3v {
  70                 compatible = "regulator-fixed";
  71                 regulator-name = "fixed-3.3V";
  72                 regulator-min-microvolt = <3300000>;
  73                 regulator-max-microvolt = <3300000>;
  74                 regulator-boot-on;
  75                 regulator-always-on;
  76         };
  77
  78         reg_5v: regulator-5v {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "fixed-5V";
  81                 regulator-min-microvolt = <5000000>;
  82                 regulator-max-microvolt = <5000000>;
  83                 regulator-boot-on;
  84                 regulator-always-on;
  85         };
  86 };
  87
  88 &bch {
  89         status = "disabled";
  90 };
  91
  92 &btif {
  93         status = "okay";
  94 };
  95
  96 &cir {
  97         pinctrl-names = "default";
  98         pinctrl-0 = <&irrx_pins>;
  99         status = "okay";
 100 };
 101
 102 &eth {
 103         pinctrl-names = "default";
 104         pinctrl-0 = <&eth_pins>;
 105         status = "okay";
 106
 107         gmac0: mac@0 {
 108                 compatible = "mediatek,eth-mac";
 109                 reg = <0>;
 110                 phy-mode = "2500base-x";
 111
 112                 fixed-link {
 113                         speed = <2500>;
 114                         full-duplex;
 115                         pause;
 116                 };
 117         };
 118
 119         mdio-bus {
 120                 #address-cells = <1>;
 121                 #size-cells = <0>;
 122
 123                 switch@0 {
 124                         compatible = "mediatek,mt7531";
 125                         reg = <0>;
 126                         reset-gpios = <&pio 54 0>;
 127
 128                         ports {
 129                                 #address-cells = <1>;
 130                                 #size-cells = <0>;
 131
 132                                 port@0 {
 133                                         reg = <0>;
 134                                         label = "lan0";
 135                                 };
 136
 137                                 port@1 {
 138                                         reg = <1>;
 139                                         label = "lan1";
 140                                 };
 141
 142                                 port@2 {
 143                                         reg = <2>;
 144                                         label = "lan2";
 145                                 };
 146
 147                                 port@3 {
 148                                         reg = <3>;
 149                                         label = "lan3";
 150                                 };
 151
 152                                 port@4 {
 153                                         reg = <4>;
 154                                         label = "wan";
 155                                 };
 156
 157                                 port@6 {
 158                                         reg = <6>;
 159                                         label = "cpu";
 160                                         ethernet = <&gmac0>;
 161                                         phy-mode = "2500base-x";
 162
 163                                         fixed-link {
 164                                                 speed = <2500>;
 165                                                 full-duplex;
 166                                                 pause;
 167                                         };
 168                                 };
 169                         };
 170                 };
 171
 172         };
 173 };
 174
 175 &i2c1 {
 176         pinctrl-names = "default";
 177         pinctrl-0 = <&i2c1_pins>;
 178         status = "okay";
 179 };
 180
 181 &i2c2 {
 182         pinctrl-names = "default";
 183         pinctrl-0 = <&i2c2_pins>;
 184         status = "okay";
 185 };
 186
 187 &mmc0 {
 188         pinctrl-names = "default", "state_uhs";
 189         pinctrl-0 = <&emmc_pins_default>;
 190         pinctrl-1 = <&emmc_pins_uhs>;
 191         status = "okay";
 192         bus-width = <8>;
 193         max-frequency = <50000000>;
 194         cap-mmc-highspeed;
 195         mmc-hs200-1_8v;
 196         vmmc-supply = <&reg_3p3v>;
 197         vqmmc-supply = <&reg_1p8v>;
 198         assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
 199         assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
 200         non-removable;
 201 };
 202
 203 &mmc1 {
 204         pinctrl-names = "default", "state_uhs";
 205         pinctrl-0 = <&sd0_pins_default>;
 206         pinctrl-1 = <&sd0_pins_uhs>;
 207         status = "okay";
 208         bus-width = <4>;
 209         max-frequency = <50000000>;
 210         cap-sd-highspeed;
 211         r_smpl = <1>;
 212         cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
 213         vmmc-supply = <&reg_3p3v>;
 214         vqmmc-supply = <&reg_3p3v>;
 215         assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
 216         assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
 217 };
 218
 219 &nandc {
 220         pinctrl-names = "default";
 221         pinctrl-0 = <&parallel_nand_pins>;
 222         status = "disabled";
 223 };
 224
 225 &nor_flash {
 226         pinctrl-names = "default";
 227         pinctrl-0 = <&spi_nor_pins>;
 228         status = "disabled";
 229
 230         flash@0 {
 231                 compatible = "jedec,spi-nor";
 232                 reg = <0>;
 233         };
 234 };
 235
 236 &pcie0 {
 237         pinctrl-names = "default";
 238         pinctrl-0 = <&pcie0_pins>;
 239         status = "okay";
 240 };
 241
 242 &pio {
 243         /* eMMC is shared pin with parallel NAND */
 244         emmc_pins_default: emmc-pins-default {
 245                 mux {
 246                         function = "emmc", "emmc_rst";
 247                         groups = "emmc";
 248                 };
 249
 250                 /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
 251                  * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
 252                  * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
 253                  */
 254                 conf-cmd-dat {
 255                         pins = "NDL0", "NDL1", "NDL2",
 256                                "NDL3", "NDL4", "NDL5",
 257                                "NDL6", "NDL7", "NRB";
 258                         input-enable;
 259                         bias-pull-up;
 260                 };
 261
 262                 conf-clk {
 263                         pins = "NCLE";
 264                         bias-pull-down;
 265                 };
 266         };
 267
 268         emmc_pins_uhs: emmc-pins-uhs {
 269                 mux {
 270                         function = "emmc";
 271                         groups = "emmc";
 272                 };
 273
 274                 conf-cmd-dat {
 275                         pins = "NDL0", "NDL1", "NDL2",
 276                                "NDL3", "NDL4", "NDL5",
 277                                "NDL6", "NDL7", "NRB";
 278                         input-enable;
 279                         drive-strength = <4>;
 280                         bias-pull-up;
 281                 };
 282
 283                 conf-clk {
 284                         pins = "NCLE";
 285                         drive-strength = <4>;
 286                         bias-pull-down;
 287                 };
 288         };
 289
 290         eth_pins: eth-pins {
 291                 mux {
 292                         function = "eth";
 293                         groups = "mdc_mdio", "rgmii_via_gmac2";
 294                 };
 295         };
 296
 297         i2c1_pins: i2c1-pins {
 298                 mux {
 299                         function = "i2c";
 300                         groups = "i2c1_0";
 301                 };
 302         };
 303
 304         i2c2_pins: i2c2-pins {
 305                 mux {
 306                         function = "i2c";
 307                         groups = "i2c2_0";
 308                 };
 309         };
 310
 311         i2s1_pins: i2s1-pins {
 312                 mux {
 313                         function = "i2s";
 314                         groups =  "i2s_out_mclk_bclk_ws",
 315                                   "i2s1_in_data",
 316                                   "i2s1_out_data";
 317                 };
 318
 319                 conf {
 320                         pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
 321                                "I2S_WS", "I2S_MCLK";
 322                         drive-strength = <12>;
 323                         bias-pull-down;
 324                 };
 325         };
 326
 327         irrx_pins: irrx-pins {
 328                 mux {
 329                         function = "ir";
 330                         groups = "ir_1_rx";
 331                 };
 332         };
 333
 334         irtx_pins: irtx-pins {
 335                 mux {
 336                         function = "ir";
 337                         groups = "ir_1_tx";
 338                 };
 339         };
 340
 341         /* Parallel nand is shared pin with eMMC */
 342         parallel_nand_pins: parallel-nand-pins {
 343                 mux {
 344                         function = "flash";
 345                         groups = "par_nand";
 346                 };
 347         };
 348
 349         pcie0_pins: pcie0-pins {
 350                 mux {
 351                         function = "pcie";
 352                         groups = "pcie0_pad_perst",
 353                                  "pcie0_1_waken",
 354                                  "pcie0_1_clkreq";
 355                 };
 356         };
 357
 358         pcie1_pins: pcie1-pins {
 359                 mux {
 360                         function = "pcie";
 361                         groups = "pcie1_pad_perst",
 362                                  "pcie1_0_waken",
 363                                  "pcie1_0_clkreq";
 364                 };
 365         };
 366
 367         pmic_bus_pins: pmic-bus-pins {
 368                 mux {
 369                         function = "pmic";
 370                         groups = "pmic_bus";
 371                 };
 372         };
 373
 374         pwm7_pins: pwm1-2-pins {
 375                 mux {
 376                         function = "pwm";
 377                         groups = "pwm_ch7_2";
 378                 };
 379         };
 380
 381         wled_pins: wled-pins {
 382                 mux {
 383                         function = "led";
 384                         groups = "wled";
 385                 };
 386         };
 387
 388         sd0_pins_default: sd0-pins-default {
 389                 mux {
 390                         function = "sd";
 391                         groups = "sd_0";
 392                 };
 393
 394                 /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
 395                  *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
 396                  *  DAT2, DAT3, CMD, CLK for SD respectively.
 397                  */
 398                 conf-cmd-data {
 399                         pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
 400                                "I2S2_IN","I2S4_OUT";
 401                         input-enable;
 402                         drive-strength = <8>;
 403                         bias-pull-up;
 404                 };
 405                 conf-clk {
 406                         pins = "I2S3_OUT";
 407                         drive-strength = <12>;
 408                         bias-pull-down;
 409                 };
 410                 conf-cd {
 411                         pins = "TXD3";
 412                         bias-pull-up;
 413                 };
 414         };
 415
 416         sd0_pins_uhs: sd0-pins-uhs {
 417                 mux {
 418                         function = "sd";
 419                         groups = "sd_0";
 420                 };
 421
 422                 conf-cmd-data {
 423                         pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
 424                                "I2S2_IN","I2S4_OUT";
 425                         input-enable;
 426                         bias-pull-up;
 427                 };
 428
 429                 conf-clk {
 430                         pins = "I2S3_OUT";
 431                         bias-pull-down;
 432                 };
 433         };
 434
 435         /* Serial NAND is shared pin with SPI-NOR */
 436         serial_nand_pins: serial-nand-pins {
 437                 mux {
 438                         function = "flash";
 439                         groups = "snfi";
 440                 };
 441         };
 442
 443         spic0_pins: spic0-pins {
 444                 mux {
 445                         function = "spi";
 446                         groups = "spic0_0";
 447                 };
 448         };
 449
 450         spic1_pins: spic1-pins {
 451                 mux {
 452                         function = "spi";
 453                         groups = "spic1_0";
 454                 };
 455         };
 456
 457         /* SPI-NOR is shared pin with serial NAND */
 458         spi_nor_pins: spi-nor-pins {
 459                 mux {
 460                         function = "flash";
 461                         groups = "spi_nor";
 462                 };
 463         };
 464
 465         /* serial NAND is shared pin with SPI-NOR */
 466         serial_nand_pins: serial-nand-pins {
 467                 mux {
 468                         function = "flash";
 469                         groups = "snfi";
 470                 };
 471         };
 472
 473         uart0_pins: uart0-pins {
 474                 mux {
 475                         function = "uart";
 476                         groups = "uart0_0_tx_rx" ;
 477                 };
 478         };
 479
 480         uart2_pins: uart2-pins {
 481                 mux {
 482                         function = "uart";
 483                         groups = "uart2_1_tx_rx" ;
 484                 };
 485         };
 486
 487         watchdog_pins: watchdog-pins {
 488                 mux {
 489                         function = "watchdog";
 490                         groups = "watchdog";
 491                 };
 492         };
 493
 494         wmac_pins: wmac-pins {
 495                 mux {
 496                         function = "antsel";
 497                         groups = "antsel0", "antsel1", "antsel2", "antsel3",
 498                                  "antsel4", "antsel5", "antsel6", "antsel7",
 499                                  "antsel8", "antsel9", "antsel12", "antsel13",
 500                                  "antsel14", "antsel15", "antsel16", "antsel17";
 501                 };
 502         };
 503 };
 504
 505 &pwm {
 506         pinctrl-names = "default";
 507         pinctrl-0 = <&pwm7_pins>;
 508         status = "okay";
 509 };
 510
 511 &pwrap {
 512         pinctrl-names = "default";
 513         pinctrl-0 = <&pmic_bus_pins>;
 514
 515         status = "okay";
 516 };
 517
 518 &sata {
 519         status = "okay";
 520 };
 521
 522 &sata_phy {
 523         status = "okay";
 524 };
 525
 526 &spi0 {
 527         pinctrl-names = "default";
 528         pinctrl-0 = <&spic0_pins>;
 529         status = "okay";
 530 };
 531
 532 &spi1 {
 533         pinctrl-names = "default";
 534         pinctrl-0 = <&spic1_pins>;
 535         status = "okay";
 536 };
 537
 538 &ssusb {
 539         vusb33-supply = <&reg_3p3v>;
 540         vbus-supply = <&reg_5v>;
 541         status = "okay";
 542 };
 543
 544 &u3phy {
 545         status = "okay";
 546 };
 547
 548 &uart0 {
 549         pinctrl-names = "default";
 550         pinctrl-0 = <&uart0_pins>;
 551         status = "okay";
 552 };
 553
 554 &uart2 {
 555         pinctrl-names = "default";
 556         pinctrl-0 = <&uart2_pins>;
 557         status = "okay";
 558 };
 559
 560 &watchdog {
 561         pinctrl-names = "default";
 562         pinctrl-0 = <&watchdog_pins>;
 563         status = "okay";
 564 };
 565
 566 &wmac {
 567         pinctrl-names = "default";
 568         pinctrl-0 = <&wmac_pins>;
 569         status = "okay";
 570 };