arch/arm/boot/dts/st/spear1340.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * DTS file for all SPEAr1340 SoCs
   4  *
   5  * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
   6  */
   7
   8 /include/ "spear13xx.dtsi"
   9
  10 / {
  11         compatible = "st,spear1340";
  12
  13         ahb {
  14
  15                 spics: spics@e0700000{
  16                         compatible = "st,spear-spics-gpio";
  17                         reg = <0xe0700000 0x1000>;
  18                         st-spics,peripcfg-reg = <0x42c>;
  19                         st-spics,sw-enable-bit = <21>;
  20                         st-spics,cs-value-bit = <20>;
  21                         st-spics,cs-enable-mask = <3>;
  22                         st-spics,cs-enable-shift = <18>;
  23                         gpio-controller;
  24                         #gpio-cells = <2>;
  25                         status = "disabled";
  26                 };
  27
  28                 miphy0: miphy@eb800000 {
  29                         compatible = "st,spear1340-miphy";
  30                         reg = <0xeb800000 0x4000>;
  31                         misc = <&misc>;
  32                         #phy-cells = <1>;
  33                         status = "disabled";
  34                 };
  35
  36                 ahci0: ahci@b1000000 {
  37                         compatible = "snps,spear-ahci";
  38                         reg = <0xb1000000 0x10000>;
  39                         interrupts = <0 72 0x4>;
  40                         phys = <&miphy0 0>;
  41                         phy-names = "sata-phy";
  42                         status = "disabled";
  43                 };
  44
  45                 pcie0: pcie@b1000000 {
  46                         compatible = "st,spear1340-pcie", "snps,dw-pcie";
  47                         reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
  48                         reg-names = "dbi", "config";
  49                         interrupts = <0 68 0x4>;
  50                         num-lanes = <1>;
  51                         phys = <&miphy0 1>;
  52                         phy-names = "pcie-phy";
  53                         #address-cells = <3>;
  54                         #size-cells = <2>;
  55                         device_type = "pci";
  56                         ranges = <0x81000000 0 0         0x80020000 0 0x00010000   /* downstream I/O */
  57                                 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
  58                         bus-range = <0x00 0xff>;
  59                         status = "disabled";
  60                 };
  61
  62                 i2s-play@b2400000 {
  63                         compatible = "snps,designware-i2s";
  64                         reg = <0xb2400000 0x10000>;
  65                         interrupt-names = "play_irq";
  66                         interrupts = <0 98 0x4
  67                                       0 99 0x4>;
  68                         play;
  69                         channel = <8>;
  70                         status = "disabled";
  71                 };
  72
  73                 i2s-rec@b2000000 {
  74                         compatible = "snps,designware-i2s";
  75                         reg = <0xb2000000 0x10000>;
  76                         interrupt-names = "record_irq";
  77                         interrupts = <0 100  0x4
  78                                       0 101 0x4>;
  79                         record;
  80                         channel = <8>;
  81                         status = "disabled";
  82                 };
  83
  84                 pinmux: pinmux@e0700000 {
  85                         compatible = "st,spear1340-pinmux";
  86                         reg = <0xe0700000 0x1000>;
  87                         #gpio-range-cells = <3>;
  88                 };
  89
  90                 pwm: pwm@e0180000 {
  91                         compatible = "st,spear13xx-pwm";
  92                         reg = <0xe0180000 0x1000>;
  93                         #pwm-cells = <2>;
  94                         status = "disabled";
  95                 };
  96
  97                 spdif-in@d0100000 {
  98                         compatible = "st,spdif-in";
  99                         reg = < 0xd0100000 0x20000
 100                                 0xd0110000 0x10000 >;
 101                         interrupts = <0 84 0x4>;
 102                         status = "disabled";
 103                 };
 104
 105                 spdif-out@d0000000 {
 106                         compatible = "st,spdif-out";
 107                         reg = <0xd0000000 0x20000>;
 108                         interrupts = <0 85 0x4>;
 109                         status = "disabled";
 110                 };
 111
 112                 spi1: spi@5d400000 {
 113                         compatible = "arm,pl022", "arm,primecell";
 114                         reg = <0x5d400000 0x1000>;
 115                         #address-cells = <1>;
 116                         #size-cells = <0>;
 117                         interrupts = <0 99 0x4>;
 118                         status = "disabled";
 119                 };
 120
 121                 apb {
 122                         i2c1: i2c@b4000000 {
 123                                 #address-cells = <1>;
 124                                 #size-cells = <0>;
 125                                 compatible = "snps,designware-i2c";
 126                                 reg = <0xb4000000 0x1000>;
 127                                 interrupts = <0 104 0x4>;
 128                                 write-16bit;
 129                                 status = "disabled";
 130                         };
 131
 132                         serial@b4100000 {
 133                                 compatible = "arm,pl011", "arm,primecell";
 134                                 reg = <0xb4100000 0x1000>;
 135                                 interrupts = <0 105 0x4>;
 136                                 status = "disabled";
 137                                 dmas = <&dwdma0 13 0 1>,
 138                                         <&dwdma0 12 1 0>;
 139                                 dma-names = "rx", "tx";
 140                         };
 141
 142                         thermal@e07008c4 {
 143                                 st,thermal-flags = <0x2a00>;
 144                         };
 145
 146                         gpiopinctrl: gpio@e2800000 {
 147                                 compatible = "st,spear-plgpio";
 148                                 reg = <0xe2800000 0x1000>;
 149                                 interrupts = <0 107 0x4>;
 150                                 #interrupt-cells = <1>;
 151                                 interrupt-controller;
 152                                 gpio-controller;
 153                                 #gpio-cells = <2>;
 154                                 gpio-ranges = <&pinmux 0 0 252>;
 155                                 status = "disabled";
 156
 157                                 st-plgpio,ngpio = <250>;
 158                                 st-plgpio,wdata-reg = <0x40>;
 159                                 st-plgpio,dir-reg = <0x00>;
 160                                 st-plgpio,ie-reg = <0x80>;
 161                                 st-plgpio,rdata-reg = <0x20>;
 162                                 st-plgpio,mis-reg = <0xa0>;
 163                                 st-plgpio,eit-reg = <0x60>;
 164                         };
 165                 };
 166         };
 167 };