arch/arm/boot/dts/meson8.dtsi

   1 // SPDX-License-Identifier: GPL-2.0 OR MIT
   2 /*
   3  * Copyright 2014 Carlo Caione <carlo@caione.org>
   4  */
   5
   6 #include <dt-bindings/clock/meson8b-clkc.h>
   7 #include <dt-bindings/gpio/meson8-gpio.h>
   8 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
   9 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
  10 #include "meson.dtsi"
  11
  12 / {
  13         model = "Amlogic Meson8 SoC";
  14         compatible = "amlogic,meson8";
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu0: cpu@200 {
  21                         device_type = "cpu";
  22                         compatible = "arm,cortex-a9";
  23                         next-level-cache = <&L2>;
  24                         reg = <0x200>;
  25                         enable-method = "amlogic,meson8-smp";
  26                         resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
  27                         operating-points-v2 = <&cpu_opp_table>;
  28                         clocks = <&clkc CLKID_CPUCLK>;
  29                 };
  30
  31                 cpu1: cpu@201 {
  32                         device_type = "cpu";
  33                         compatible = "arm,cortex-a9";
  34                         next-level-cache = <&L2>;
  35                         reg = <0x201>;
  36                         enable-method = "amlogic,meson8-smp";
  37                         resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
  38                         operating-points-v2 = <&cpu_opp_table>;
  39                         clocks = <&clkc CLKID_CPUCLK>;
  40                 };
  41
  42                 cpu2: cpu@202 {
  43                         device_type = "cpu";
  44                         compatible = "arm,cortex-a9";
  45                         next-level-cache = <&L2>;
  46                         reg = <0x202>;
  47                         enable-method = "amlogic,meson8-smp";
  48                         resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
  49                         operating-points-v2 = <&cpu_opp_table>;
  50                         clocks = <&clkc CLKID_CPUCLK>;
  51                 };
  52
  53                 cpu3: cpu@203 {
  54                         device_type = "cpu";
  55                         compatible = "arm,cortex-a9";
  56                         next-level-cache = <&L2>;
  57                         reg = <0x203>;
  58                         enable-method = "amlogic,meson8-smp";
  59                         resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
  60                         operating-points-v2 = <&cpu_opp_table>;
  61                         clocks = <&clkc CLKID_CPUCLK>;
  62                 };
  63         };
  64
  65         cpu_opp_table: opp-table {
  66                 compatible = "operating-points-v2";
  67                 opp-shared;
  68
  69                 opp-96000000 {
  70                         opp-hz = /bits/ 64 <96000000>;
  71                         opp-microvolt = <825000>;
  72                 };
  73                 opp-192000000 {
  74                         opp-hz = /bits/ 64 <192000000>;
  75                         opp-microvolt = <825000>;
  76                 };
  77                 opp-312000000 {
  78                         opp-hz = /bits/ 64 <312000000>;
  79                         opp-microvolt = <825000>;
  80                 };
  81                 opp-408000000 {
  82                         opp-hz = /bits/ 64 <408000000>;
  83                         opp-microvolt = <825000>;
  84                 };
  85                 opp-504000000 {
  86                         opp-hz = /bits/ 64 <504000000>;
  87                         opp-microvolt = <825000>;
  88                 };
  89                 opp-600000000 {
  90                         opp-hz = /bits/ 64 <600000000>;
  91                         opp-microvolt = <850000>;
  92                 };
  93                 opp-720000000 {
  94                         opp-hz = /bits/ 64 <720000000>;
  95                         opp-microvolt = <850000>;
  96                 };
  97                 opp-816000000 {
  98                         opp-hz = /bits/ 64 <816000000>;
  99                         opp-microvolt = <875000>;
 100                 };
 101                 opp-1008000000 {
 102                         opp-hz = /bits/ 64 <1008000000>;
 103                         opp-microvolt = <925000>;
 104                 };
 105                 opp-1200000000 {
 106                         opp-hz = /bits/ 64 <1200000000>;
 107                         opp-microvolt = <975000>;
 108                 };
 109                 opp-1416000000 {
 110                         opp-hz = /bits/ 64 <1416000000>;
 111                         opp-microvolt = <1025000>;
 112                 };
 113                 opp-1608000000 {
 114                         opp-hz = /bits/ 64 <1608000000>;
 115                         opp-microvolt = <1100000>;
 116                 };
 117                 opp-1800000000 {
 118                         status = "disabled";
 119                         opp-hz = /bits/ 64 <1800000000>;
 120                         opp-microvolt = <1125000>;
 121                 };
 122                 opp-1992000000 {
 123                         status = "disabled";
 124                         opp-hz = /bits/ 64 <1992000000>;
 125                         opp-microvolt = <1150000>;
 126                 };
 127         };
 128
 129         gpu_opp_table: gpu-opp-table {
 130                 compatible = "operating-points-v2";
 131
 132                 opp-182150000 {
 133                         opp-hz = /bits/ 64 <182150000>;
 134                         opp-microvolt = <1150000>;
 135                 };
 136                 opp-318750000 {
 137                         opp-hz = /bits/ 64 <318750000>;
 138                         opp-microvolt = <1150000>;
 139                 };
 140                 opp-425000000 {
 141                         opp-hz = /bits/ 64 <425000000>;
 142                         opp-microvolt = <1150000>;
 143                 };
 144                 opp-510000000 {
 145                         opp-hz = /bits/ 64 <510000000>;
 146                         opp-microvolt = <1150000>;
 147                 };
 148                 opp-637500000 {
 149                         opp-hz = /bits/ 64 <637500000>;
 150                         opp-microvolt = <1150000>;
 151                         turbo-mode;
 152                 };
 153         };
 154
 155         pmu {
 156                 compatible = "arm,cortex-a9-pmu";
 157                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 158                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 159                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 160                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 161                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 162         };
 163
 164         reserved-memory {
 165                 #address-cells = <1>;
 166                 #size-cells = <1>;
 167                 ranges;
 168
 169                 /* 2 MiB reserved for Hardware ROM Firmware? */
 170                 hwrom@0 {
 171                         reg = <0x0 0x200000>;
 172                         no-map;
 173                 };
 174
 175                 /*
 176                  * 1 MiB reserved for the "ARM Power Firmware": this is ARM
 177                  * code which is responsible for system suspend. It loads a
 178                  * piece of ARC code ("arc_power" in the vendor u-boot tree)
 179                  * into SRAM, executes that and shuts down the (last) ARM core.
 180                  * The arc_power firmware then checks various wakeup sources
 181                  * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
 182                  * simply the power key) and re-starts the ARM core once it
 183                  * detects a wakeup request.
 184                  */
 185                 power-firmware@4f00000 {
 186                         reg = <0x4f00000 0x100000>;
 187                         no-map;
 188                 };
 189         };
 190
 191         mmcbus: bus@c8000000 {
 192                 compatible = "simple-bus";
 193                 reg = <0xc8000000 0x8000>;
 194                 #address-cells = <1>;
 195                 #size-cells = <1>;
 196                 ranges = <0x0 0xc8000000 0x8000>;
 197
 198                 dmcbus: bus@6000 {
 199                         compatible = "simple-bus";
 200                         reg = <0x6000 0x400>;
 201                         #address-cells = <1>;
 202                         #size-cells = <1>;
 203                         ranges = <0x0 0x6000 0x400>;
 204
 205                         canvas: video-lut@20 {
 206                                 compatible = "amlogic,meson8-canvas",
 207                                              "amlogic,canvas";
 208                                 reg = <0x20 0x14>;
 209                         };
 210                 };
 211         };
 212
 213         apb: bus@d0000000 {
 214                 compatible = "simple-bus";
 215                 reg = <0xd0000000 0x200000>;
 216                 #address-cells = <1>;
 217                 #size-cells = <1>;
 218                 ranges = <0x0 0xd0000000 0x200000>;
 219
 220                 mali: gpu@c0000 {
 221                         compatible = "amlogic,meson8-mali", "arm,mali-450";
 222                         reg = <0xc0000 0x40000>;
 223                         interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 224                                      <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 225                                      <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 226                                      <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 227                                      <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
 228                                      <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
 229                                      <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
 230                                      <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 231                                      <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 232                                      <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
 233                                      <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 234                                      <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 235                                      <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
 236                                      <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
 237                                      <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
 238                                      <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
 239                                      <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
 240                                      <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 241                         interrupt-names = "gp", "gpmmu", "pp", "pmu",
 242                                           "pp0", "ppmmu0", "pp1", "ppmmu1",
 243                                           "pp2", "ppmmu2", "pp4", "ppmmu4",
 244                                           "pp5", "ppmmu5", "pp6", "ppmmu6";
 245                         resets = <&reset RESET_MALI>;
 246                         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 247                         clock-names = "bus", "core";
 248                         operating-points-v2 = <&gpu_opp_table>;
 249                 };
 250         };
 251 }; /* end of / */
 252
 253 &aobus {
 254         pmu: pmu@e0 {
 255                 compatible = "amlogic,meson8-pmu", "syscon";
 256                 reg = <0xe0 0x8>;
 257         };
 258
 259         pinctrl_aobus: pinctrl@84 {
 260                 compatible = "amlogic,meson8-aobus-pinctrl";
 261                 reg = <0x84 0xc>;
 262                 #address-cells = <1>;
 263                 #size-cells = <1>;
 264                 ranges;
 265
 266                 gpio_ao: ao-bank@14 {
 267                         reg = <0x14 0x4>,
 268                               <0x2c 0x4>,
 269                               <0x24 0x8>;
 270                         reg-names = "mux", "pull", "gpio";
 271                         gpio-controller;
 272                         #gpio-cells = <2>;
 273                         gpio-ranges = <&pinctrl_aobus 0 0 16>;
 274                 };
 275
 276                 uart_ao_a_pins: uart_ao_a {
 277                         mux {
 278                                 groups = "uart_tx_ao_a", "uart_rx_ao_a";
 279                                 function = "uart_ao";
 280                                 bias-disable;
 281                         };
 282                 };
 283
 284                 i2c_ao_pins: i2c_mst_ao {
 285                         mux {
 286                                 groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
 287                                 function = "i2c_mst_ao";
 288                                 bias-disable;
 289                         };
 290                 };
 291
 292                 ir_recv_pins: remote {
 293                         mux {
 294                                 groups = "remote_input";
 295                                 function = "remote";
 296                                 bias-disable;
 297                         };
 298                 };
 299
 300                 pwm_f_ao_pins: pwm-f-ao {
 301                         mux {
 302                                 groups = "pwm_f_ao";
 303                                 function = "pwm_f_ao";
 304                                 bias-disable;
 305                         };
 306                 };
 307         };
 308 };
 309
 310 &cbus {
 311         reset: reset-controller@4404 {
 312                 compatible = "amlogic,meson8b-reset";
 313                 reg = <0x4404 0x9c>;
 314                 #reset-cells = <1>;
 315         };
 316
 317         analog_top: analog-top@81a8 {
 318                 compatible = "amlogic,meson8-analog-top", "syscon";
 319                 reg = <0x81a8 0x14>;
 320         };
 321
 322         pwm_ef: pwm@86c0 {
 323                 compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
 324                 reg = <0x86c0 0x10>;
 325                 #pwm-cells = <3>;
 326                 status = "disabled";
 327         };
 328
 329         clock-measure@8758 {
 330                 compatible = "amlogic,meson8-clk-measure";
 331                 reg = <0x8758 0x1c>;
 332         };
 333
 334         pinctrl_cbus: pinctrl@9880 {
 335                 compatible = "amlogic,meson8-cbus-pinctrl";
 336                 reg = <0x9880 0x10>;
 337                 #address-cells = <1>;
 338                 #size-cells = <1>;
 339                 ranges;
 340
 341                 gpio: banks@80b0 {
 342                         reg = <0x80b0 0x28>,
 343                               <0x80e8 0x18>,
 344                               <0x8120 0x18>,
 345                               <0x8030 0x30>;
 346                         reg-names = "mux", "pull", "pull-enable", "gpio";
 347                         gpio-controller;
 348                         #gpio-cells = <2>;
 349                         gpio-ranges = <&pinctrl_cbus 0 0 120>;
 350                 };
 351
 352                 sd_a_pins: sd-a {
 353                         mux {
 354                                 groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
 355                                         "sd_d3_a", "sd_clk_a", "sd_cmd_a";
 356                                 function = "sd_a";
 357                                 bias-disable;
 358                         };
 359                 };
 360
 361                 sd_b_pins: sd-b {
 362                         mux {
 363                                 groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
 364                                         "sd_d3_b", "sd_clk_b", "sd_cmd_b";
 365                                 function = "sd_b";
 366                                 bias-disable;
 367                         };
 368                 };
 369
 370                 sd_c_pins: sd-c {
 371                         mux {
 372                                 groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
 373                                         "sd_d3_c", "sd_clk_c", "sd_cmd_c";
 374                                 function = "sd_c";
 375                                 bias-disable;
 376                         };
 377                 };
 378
 379                 spi_nor_pins: nor {
 380                         mux {
 381                                 groups = "nor_d", "nor_q", "nor_c", "nor_cs";
 382                                 function = "nor";
 383                                 bias-disable;
 384                         };
 385                 };
 386
 387                 eth_pins: ethernet {
 388                         mux {
 389                                 groups = "eth_tx_clk_50m", "eth_tx_en",
 390                                          "eth_txd1", "eth_txd0",
 391                                          "eth_rx_clk_in", "eth_rx_dv",
 392                                          "eth_rxd1", "eth_rxd0", "eth_mdio",
 393                                          "eth_mdc";
 394                                 function = "ethernet";
 395                                 bias-disable;
 396                         };
 397                 };
 398
 399                 pwm_e_pins: pwm-e {
 400                         mux {
 401                                 groups = "pwm_e";
 402                                 function = "pwm_e";
 403                                 bias-disable;
 404                         };
 405                 };
 406
 407                 uart_a1_pins: uart-a1 {
 408                         mux {
 409                                 groups = "uart_tx_a1",
 410                                        "uart_rx_a1";
 411                                 function = "uart_a";
 412                                 bias-disable;
 413                         };
 414                 };
 415
 416                 uart_a1_cts_rts_pins: uart-a1-cts-rts {
 417                         mux {
 418                                 groups = "uart_cts_a1",
 419                                        "uart_rts_a1";
 420                                 function = "uart_a";
 421                                 bias-disable;
 422                         };
 423                 };
 424         };
 425 };
 426
 427 &ahb_sram {
 428         smp-sram@1ff80 {
 429                 compatible = "amlogic,meson8-smp-sram";
 430                 reg = <0x1ff80 0x8>;
 431         };
 432 };
 433
 434 &efuse {
 435         compatible = "amlogic,meson8-efuse";
 436         clocks = <&clkc CLKID_EFUSE>;
 437         clock-names = "core";
 438
 439         temperature_calib: calib@1f4 {
 440                 /* only the upper two bytes are relevant */
 441                 reg = <0x1f4 0x4>;
 442         };
 443 };
 444
 445 &ethmac {
 446         clocks = <&clkc CLKID_ETH>;
 447         clock-names = "stmmaceth";
 448 };
 449
 450 &gpio_intc {
 451         compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
 452         status = "okay";
 453 };
 454
 455 &hhi {
 456         clkc: clock-controller {
 457                 compatible = "amlogic,meson8-clkc";
 458                 #clock-cells = <1>;
 459                 #reset-cells = <1>;
 460         };
 461 };
 462
 463 &hwrng {
 464         compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 465         clocks = <&clkc CLKID_RNG0>;
 466         clock-names = "core";
 467 };
 468
 469 &i2c_AO {
 470         clocks = <&clkc CLKID_CLK81>;
 471 };
 472
 473 &i2c_A {
 474         clocks = <&clkc CLKID_CLK81>;
 475 };
 476
 477 &i2c_B {
 478         clocks = <&clkc CLKID_CLK81>;
 479 };
 480
 481 &L2 {
 482         arm,data-latency = <3 3 3>;
 483         arm,tag-latency = <2 2 2>;
 484         arm,filter-ranges = <0x100000 0xc0000000>;
 485         prefetch-data = <1>;
 486         prefetch-instr = <1>;
 487         arm,shared-override;
 488 };
 489
 490 &periph {
 491         scu@0 {
 492                 compatible = "arm,cortex-a9-scu";
 493                 reg = <0x0 0x100>;
 494         };
 495
 496         timer@200 {
 497                 compatible = "arm,cortex-a9-global-timer";
 498                 reg = <0x200 0x20>;
 499                 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 500                 clocks = <&clkc CLKID_PERIPH>;
 501
 502                 /*
 503                  * the arm_global_timer driver currently does not handle clock
 504                  * rate changes. Keep it disabled for now.
 505                  */
 506                 status = "disabled";
 507         };
 508
 509         timer@600 {
 510                 compatible = "arm,cortex-a9-twd-timer";
 511                 reg = <0x600 0x20>;
 512                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 513                 clocks = <&clkc CLKID_PERIPH>;
 514         };
 515 };
 516
 517 &pwm_ab {
 518         compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
 519 };
 520
 521 &pwm_cd {
 522         compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
 523 };
 524
 525 &rtc {
 526         compatible = "amlogic,meson8-rtc";
 527         resets = <&reset RESET_RTC>;
 528 };
 529
 530 &saradc {
 531         compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
 532         clocks = <&clkc CLKID_XTAL>,
 533                 <&clkc CLKID_SAR_ADC>;
 534         clock-names = "clkin", "core";
 535         amlogic,hhi-sysctrl = <&hhi>;
 536         nvmem-cells = <&temperature_calib>;
 537         nvmem-cell-names = "temperature_calib";
 538 };
 539
 540 &sdio {
 541         compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
 542         clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
 543         clock-names = "core", "clkin";
 544 };
 545
 546 &spifc {
 547         clocks = <&clkc CLKID_CLK81>;
 548 };
 549
 550 &timer_abcde {
 551         clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
 552         clock-names = "xtal", "pclk";
 553 };
 554
 555 &uart_AO {
 556         compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
 557         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
 558         clock-names = "baud", "xtal", "pclk";
 559 };
 560
 561 &uart_A {
 562         compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
 563         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
 564         clock-names = "baud", "xtal", "pclk";
 565 };
 566
 567 &uart_B {
 568         compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
 569         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
 570         clock-names = "baud", "xtal", "pclk";
 571 };
 572
 573 &uart_C {
 574         compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
 575         clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
 576         clock-names = "baud", "xtal", "pclk";
 577 };
 578
 579 &usb0 {
 580         compatible = "amlogic,meson8-usb", "snps,dwc2";
 581         clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
 582         clock-names = "otg";
 583 };
 584
 585 &usb1 {
 586         compatible = "amlogic,meson8-usb", "snps,dwc2";
 587         clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 588         clock-names = "otg";
 589 };
 590
 591 &usb0_phy {
 592         compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
 593         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
 594         clock-names = "usb_general", "usb";
 595         resets = <&reset RESET_USB_OTG>;
 596 };
 597
 598 &usb1_phy {
 599         compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
 600         clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
 601         clock-names = "usb_general", "usb";
 602         resets = <&reset RESET_USB_OTG>;
 603 };