rsyslog: Turn off rate limiting
[amitay/autocluster.git] / base /
2014-07-28 Martin Schwenkersyslog: Turn off rate limiting
2014-07-02 Martin SchwenkeUse a single entry-point script for post-boot setup
2014-07-02 Martin SchwenkeRework cluster_setup() to use node types instead of...
2014-07-02 Martin SchwenkeNo need to chkconfig ctdb - it is enabled by default
2014-07-02 Martin SchwenkeStore shared disk IDs in a variable instead of a file
2014-07-02 Martin SchwenkeRename node type "sofs_front" to "nas"
2014-07-02 Martin SchwenkeRename node type "sofs_storage" to "storage_gpfs"
2014-07-02 Martin SchwenkeReplace external waitfor script with a function
2014-07-02 Martin SchwenkeAdd gpfs.gskit package
2014-07-02 Martin SchwenkeClean up GPFS setup script
2014-07-02 Martin SchwenkeCleanup post-boot cluster configuration
2014-07-02 Martin SchwenkeMove wait_until_healthy() into setup_cluster.sh
2014-07-02 Martin SchwenkeDon't manually mess with ntpd, just enable it in kickstart
2014-07-02 Martin SchwenkeRework package installation during post-boot configuration
2014-07-02 Martin SchwenkeRename gpfs-nas.conf to nas.conf
2014-07-02 Martin SchwenkeNew configuration variables CLUSTERFS_TYPE, CLUSTERFS_D...
2014-07-02 Martin SchwenkeUpdate cluster_configure README
2014-07-02 Martin SchwenkeRemove SoFS GUI support
2014-07-02 Martin SchwenkeRemove "sofs" command on nodes
2014-06-25 Martin SchwenkeSupport RHEL 7 multipath configuration changes
2014-06-25 Martin SchwenkeAdd shared disk ID as serial number in shared disk XML
2014-06-25 Martin SchwenkeAdd chrony.conf for RHEL 7.0
2014-06-25 Martin SchwenkeRename configuration variable GATEWAY to KVMHOST
2014-06-25 Martin SchwenkeDefine gateway for default route in $NETWORKS
2014-06-25 Martin SchwenkeAdd template for /etc/hostname to overwrite new RHEL7...
2014-06-17 Martin SchwenkeMove GPFS path setting from to GPFS-specific code
2013-10-25 Martin SchwenkeRecovery lock directory should be created in cluster_co...
2013-10-25 Martin SchwenkeFix CTDB configuration
2013-10-11 Martin Schwenkecluster_configure: Hack ctdbd socket location in smb...
2013-07-11 Martin SchwenkeCTDB configuration should use CTDB_SYSLOG="yes"
2013-06-20 Martin SchwenkeAdd rsyslog configuration that uses high precision...
2013-06-01 Martin SchwenkeInstall Performance Co-Pilot development libraries...
2013-05-09 Amitay IsaacsInstall tdb-tools required for CTDB init script
2013-03-05 Martin SchwenkeNew configuration variable NETWORKS - IPBASE, IPNET...
2012-09-17 Amitay Isaacsscripts: provision command changed to samba-tool domain...
2012-08-28 Martin SchwenkeMerge remote-tracking branch 'amitay/master'
2012-08-21 Amitay Isaacsscripts: Stop redirecting output of onnode command
2012-06-19 Martin SchwenkeAdd install of e2fsprogs-devel to setup_build.sh
2012-06-01 Martin SchwenkeRename gpfs-nas-postinstall.sh to install_gpfs_nas...
2012-05-31 Amitay Isaacspostinstall: Install ctdb-tests package along with...
2012-05-22 Martin SchwenkeLoosen password policy in setup_ad_server.sh
2012-05-22 Martin SchwenkeAdd AD_NETBIOS_NAME and update setup_ad_server.sh to...
2012-05-22 Martin SchwenkeUse WORKGROUP setting in setup_ad_server.sh
2012-05-22 Martin SchwenkeNo need to set defaults in setup_cluster.sh
2012-05-22 Martin SchwenkeRemove CIFSNAME configuration variable.
2012-05-22 Martin SchwenkeRemove old SoFS-releated files
2012-05-22 Martin SchwenkeMerge remote-tracking branch 'amitay/master'
2012-05-22 Amitay IsaacsAdd script to setup Samba4 AD server
2012-05-07 Martin SchwenkeNFS client setup fixes
2012-05-02 Martin Schwenketemplates - gpfs-nas-postinstall.sh should install...
2012-03-28 Martin SchwenkeMerge remote-tracking branch 'amitay/master'
2012-03-05 Amitay IsaacsAdd AUTH_METHOD config variable for authentication
2012-03-05 Amitay IsaacsAdd ctdb plugin for creating /etc/ctdb/public_addresses
2012-03-05 Amitay IsaacsChange public addresses output format from make_public_...
2012-03-05 Amitay IsaacsRemove unused script and config file
2012-03-05 Amitay IsaacsUpdate /etc/krb5.conf using configured domain
2012-03-05 Amitay IsaacsUse workgroup rather than cluster name as samba workgroup
2012-02-09 Martin SchwenkeMerge remote-tracking branch 'amitay/master'
2012-02-07 Amitay IsaacsRemove auth_type from templates
2011-10-25 Martin SchwenkeMake setup_cluster.sh extract $auth_type from config...
2011-10-25 Martin Schwenkecluster_configure - unify templates directories for...
2011-10-25 Martin Schwenkecluster_configure - template substitutions depending...
2011-10-25 Martin Schwenkegpfs-nas.conf - define auth_method
2011-10-25 Martin Schwenkecluster_configure - need to escape '|' in regular expre...
2011-10-25 Martin Schwenkesetup_cluster.sh - fix a typo where "all" is missing...
2011-10-25 Martin Schwenkecluster_configure - fix FTP_EXPORTS setting
2011-10-25 Martin Schwenkecluster_configure - fix GPFS_SHARES setting
2011-10-25 Martin Schwenkecluster_configure - also go GPFS share setup for winbind
2011-10-24 Martin Schwenkegpfs-nas-postinstall.sh - add install of rssh
2011-10-24 Martin Schwenkesetup_gpfs.sh - fix recovery lock setting for /etc...
2011-10-20 Martin Schwenkemknsd.sh - update to use shared_disk_ids file and to...
2011-10-20 Martin SchwenkeRationalise list of packages in gpfs-nas-postinstall.sh.
2011-09-13 Martin SchwenkeNew configuration variable SHARED_DISK_ID_GEN for confi...
2010-12-06 Martin SchwenkeAdded TODO file for cluster_configure.
2010-12-06 Martin SchwenkeConfiguration file and wrapper script for simple GPFS...
2010-12-06 Martin Schwenkekickstart and post-install templated for simplified...
2010-12-06 Martin SchwenkeInitial version of cluster_configure.
2010-12-02 Martin Schwenkemknsd.sh creates its own list of disks to use as NSDs.
2010-11-29 Martin Schwenkesetup_gpfs.sh no longer uses cnpushfile.
2010-11-29 Martin SchwenkeNew configuration variable GPFS_DEFAULT_MOUNTPOINT...
2010-09-23 Martin SchwenkeMake 3rd octet of IP addresses configurable.
2010-09-23 Martin SchwenkeNTP server should be GATEWAY, not a hand constructed...
2010-08-12 Martin SchwenkeFix 2 bugs in iscsimultipath initscript.
2010-08-10 Martin SchwenkeFix think in iscsimultipath initscript.
2010-08-06 Martin SchwenkeSupport HOSTS_STATIC_ENTRIES on the rhel_base nodes...
2010-08-06 Martin SchwenkeNew configuration variable HOSTS_STATIC_ENTRIES.
2010-06-18 Martin SchwenkeIn setup_gpfs.sh, getopt complains if it doesn't have...
2010-04-20 Martin Schwenkesetup_gpfs.sh must source nsd_server_common.bash before...
2010-04-20 Martin SchwenkeAdd command-line options to setup_gpfs.sh.
2010-03-18 Martin Schwenkeiscsimultipath initscript should identify itself when...
2010-03-18 Martin SchwenkeAttempt to fix the iscsimultipath initscript.
2010-03-18 Martin SchwenkeImprove iSCSI multipath handling.
2010-03-16 Martin SchwenkeMerge branch 'iscsi'
2010-03-12 Martin SchwenkeParameterise multipath.conf.
2010-02-04 Martin Schwenkesetup_gpfs.sh didn't work if there was only a single...
2010-01-27 Martin SchwenkeFix typo(s) in setup_tsm_server.sh - $AGENTS/$agents...
2010-01-21 Martin SchwenkeRevert "Make new commands added to setup_tsm_server...
2010-01-05 Martin SchwenkeMake new commands added to setup_tsm_server.sh synchronous.
2010-01-05 Martin Schwenkesetup_tsm_server.sh updates to use storage pools more...
2010-01-05 Martin SchwenkeUpdate setup_tsm_client.sh.
next