# this runs the file serving tests that are expected to pass with samba3
-if [ $# -lt 7 ]; then
-cat <<EOF
-Usage: test_smbclient_s3.sh SERVER SERVER_IP USERNAME PASSWORD USERID LOCAL_PATH PREFIX
+if [ $# -lt 13 ]; then
+ cat <<EOF
+Usage: test_smbclient_s3.sh SERVER SERVER_IP DOMAIN USERNAME PASSWORD USERID LOCAL_PATH PREFIX SMBCLIENT WBINFO NET CONFIGURATION PROTOCOL
EOF
-exit 1;
+ exit 1
fi
-SERVER="$1"
-SERVER_IP="$2"
-USERNAME="$3"
-PASSWORD="$4"
-USERID="$5"
-LOCAL_PATH="$6"
-PREFIX="$7"
-SMBCLIENT="$VALGRIND ${SMBCLIENT:-$BINDIR/smbclient}"
-WBINFO="$VALGRIND ${WBINFO:-$BINDIR/wbinfo}"
-shift 7
-ADDARGS="$*"
-
-incdir=`dirname $0`/../../../testprogs/blackbox
+SERVER="${1}"
+SERVER_IP="${2}"
+DOMAIN="${3}"
+USERNAME="${4}"
+PASSWORD="${5}"
+USERID="${6}"
+LOCAL_PATH="${7}"
+PREFIX="${8}"
+SMBCLIENT="${9}"
+WBINFO="${10}"
+NET="${11}"
+CONFIGURATION="${12}"
+PROTOCOL="${13}"
+SMBCLIENT="$VALGRIND ${SMBCLIENT}"
+WBINFO="$VALGRIND ${WBINFO}"
+shift 13
+RAWARGS="${CONFIGURATION} -m${PROTOCOL}"
+ADDARGS="${RAWARGS} $*"
+
+incdir=$(dirname $0)/../../../testprogs/blackbox
. $incdir/subunit.sh
failed=0
+# Do not let deprecated option warnings muck this up
+SAMBA_DEPRECATED_SUPPRESS=1
+export SAMBA_DEPRECATED_SUPPRESS
+
# Test that a noninteractive smbclient does not prompt
test_noninteractive_no_prompt()
{
- prompt="smb"
+ prompt="smb"
- cmd='echo du | $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
+ cmd='echo du | $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
- if [ $? != 0 ] ; then
- echo "$out"
- echo "command failed"
- false
- return
- fi
+ if [ $? != 0 ]; then
+ echo "$out"
+ echo "command failed"
+ return 1
+ fi
- echo "$out" | grep $prompt >/dev/null 2>&1
+ echo "$out" | grep $prompt >/dev/null 2>&1
- if [ $? = 0 ] ; then
- # got a prompt .. fail
- echo matched interactive prompt in non-interactive mode
- false
- else
- true
- fi
+ if [ $? = 0 ]; then
+ # got a prompt .. fail
+ echo matched interactive prompt in non-interactive mode
+ return 1
+ fi
+
+ return 0
}
# Test that an interactive smbclient prompts to stdout
test_interactive_prompt_stdout()
{
- prompt="smb"
- tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ prompt="smb"
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
- cat > $tmpfile <<EOF
+ cat >$tmpfile <<EOF
du
quit
EOF
- cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
- ret=$?
- rm -f $tmpfile
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
- if [ $ret != 0 ] ; then
- echo "$out"
- echo "command failed"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "command failed"
+ return 1
+ fi
- echo "$out" | grep $prompt >/dev/null 2>&1
+ echo "$out" | grep $prompt >/dev/null 2>&1
- if [ $? = 0 ] ; then
- # got a prompt .. succeed
- true
- else
- echo failed to match interactive prompt on stdout
- false
- fi
+ if [ $? != 0 ]; then
+ echo failed to match interactive prompt on stdout
+ return 1
+ fi
+
+ return 0
}
# Test creating a bad symlink and deleting it.
test_bad_symlink()
{
- prompt="posix_unlink deleted file /newname"
- tmpfile=$PREFIX/smbclient_bad_symlinks_commands
+ prompt="posix_unlink deleted file /newname"
+ tmpfile=$PREFIX/smbclient_bad_symlinks_commands
- cat > $tmpfile <<EOF
+ cat >$tmpfile <<EOF
posix
posix_unlink newname
symlink badname newname
quit
EOF
- cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
- ret=$?
- rm -f $tmpfile
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
- if [ $ret != 0 ] ; then
- echo "$out"
- echo "failed create then delete bad symlink with error $ret"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed create then delete bad symlink with error $ret"
+ return 1
+ fi
- echo "$out" | grep "$prompt" >/dev/null 2>&1
+ echo "$out" | grep "$prompt" >/dev/null 2>&1
- ret=$?
- if [ $ret = 0 ] ; then
- # got the correct prompt .. succeed
- true
- else
- echo "$out"
- echo "failed create then delete bad symlink - grep failed with $ret"
- false
- fi
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed create then delete bad symlink - grep failed with $ret"
+ return 1
+ fi
+
+ return 0
}
# Test creating a good symlink and deleting it by path.
test_good_symlink()
{
- tmpfile=$PREFIX/smbclient.in.$$
- slink_name="$LOCAL_PATH/slink"
- slink_target="$LOCAL_PATH/slink_target"
+ tmpfile=$PREFIX/smbclient.in.$$
+ slink_name="$LOCAL_PATH/slink"
+ slink_target="$LOCAL_PATH/slink_target"
- touch $slink_target
- ln -s $slink_target $slink_name
- cat > $tmpfile <<EOF
+ touch $slink_target
+ ln -s $slink_target $slink_name
+ cat >$tmpfile <<EOF
del slink
quit
EOF
- cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
- ret=$?
- rm -f $tmpfile
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed delete good symlink with error $ret"
+ rm $slink_target
+ rm $slink_name
+ return 1
+ fi
+
+ if [ ! -e $slink_target ]; then
+ echo "failed delete good symlink - symlink target deleted !"
+ rm $slink_target
+ rm $slink_name
+ return 1
+ fi
+
+ if [ -e $slink_name ]; then
+ echo "failed delete good symlink - symlink still exists"
+ rm $slink_target
+ rm $slink_name
+ return 1
+ fi
- if [ $ret != 0 ] ; then
- echo "$out"
- echo "failed delete good symlink with error $ret"
rm $slink_target
- rm $slink_name
- false
- return
- fi
-
- if [ ! -e $slink_target ] ; then
- echo "failed delete good symlink - symlink target deleted !"
- rm $slink_target
- rm $slink_name
- false
- return
- fi
-
- if [ -e $slink_name ] ; then
- echo "failed delete good symlink - symlink still exists"
- rm $slink_target
- rm $slink_name
- false
- else
- # got the correct prompt .. succeed
- rm $slink_target
- true
- fi
+ return 0
}
# Test writing into a read-only directory (logon as guest) fails.
test_read_only_dir()
{
- prompt="NT_STATUS_ACCESS_DENIED making remote directory"
- tmpfile=$PREFIX/smbclient.in.$$
-
-##
-## We can't do this as non-root. We always have rights to
-## create the directory.
-##
- if [ "$USERID" != 0 ] ; then
- echo "skipping test_read_only_dir as non-root"
- true
- return
- fi
-
-##
-## We can't do this with an encrypted connection. No credentials
-## to set up the channel.
-##
- if [ "$ADDARGS" = "-e" ] ; then
- echo "skipping test_read_only_dir with encrypted connection"
- true
- return
- fi
-
- cat > $tmpfile <<EOF
+ prompt="NT_STATUS_ACCESS_DENIED making remote directory"
+ tmpfile=$PREFIX/smbclient.in.$$
+
+ ##
+ ## We can't do this as non-root. We always have rights to
+ ## create the directory.
+ ##
+ if [ "$USERID" != 0 ]; then
+ echo "skipping test_read_only_dir as non-root"
+ return 0
+ fi
+
+ ##
+ ## We can't do this with an encrypted connection. No credentials
+ ## to set up the channel.
+ ##
+ if [ "$ADDARGS" = "-e" ]; then
+ echo "skipping test_read_only_dir with encrypted connection"
+ return 0
+ fi
+
+ cat >$tmpfile <<EOF
mkdir a_test_dir
quit
EOF
- cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U% //$SERVER/ro-tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
- ret=$?
- rm -f $tmpfile
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT -U% "//$SERVER/$1" -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
- if [ $ret != 0 ] ; then
- echo "$out"
- echo "failed writing into read-only directory with error $ret"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed writing into read-only directory with error $ret"
- echo "$out" | grep "$prompt" >/dev/null 2>&1
+ return 1
+ fi
- ret=$?
- if [ $ret = 0 ] ; then
- # got the correct prompt .. succeed
- true
- else
- echo "$out"
- echo "failed writing into read-only directory - grep failed with $ret"
- false
- fi
+ echo "$out" | grep "$prompt" >/dev/null 2>&1
+
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed writing into read-only directory - grep failed with $ret"
+ return 1
+ fi
+
+ return 0
}
-# Test reading an owner-only file (logon as guest) fails.
-test_owner_only_file()
+# Test sending a message
+test_message()
{
- prompt="NT_STATUS_ACCESS_DENIED opening remote file"
- tmpfile=$PREFIX/smbclient.in.$$
-
-##
-## We can't do this as non-root. We always have rights to
-## read the file.
-##
- if [ "$USERID" != 0 ] ; then
- echo "skipping test_owner_only_file as non-root"
- true
- return
- fi
+ tmpfile=$PREFIX/message_in.$$
-##
-## We can't do this with an encrypted connection. No credentials
-## to set up the channel.
-##
- if [ "$ADDARGS" = "-e" ] ; then
- echo "skipping test_owner_only_file with encrypted connection"
- true
- return
- fi
+ cat >$tmpfile <<EOF
+Test message from pid $$
+EOF
- cat > $tmpfile <<EOF
+ cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD -M $SERVER -p 139 $ADDARGS -n msgtest < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed sending message to $SERVER with error $ret"
+ rm -f $tmpfile
+ return 1
+ fi
+
+ # The server writes this into a file message.msgtest, via message.%m to test the % sub code
+ cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmpguest -p 139 $ADDARGS -c "get message.msgtest $PREFIX/message_out.$$" 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed getting sent message from $SERVER with error $ret"
+ return 1
+ fi
+
+ if cmp $PREFIX/message_out.$$ $tmpfile; then
+ echo "failed comparison of message from $SERVER"
+ return 1
+ fi
+
+ return 0
+}
+
+# Test reading an owner-only file (logon as guest) fails.
+test_owner_only_file()
+{
+ prompt="NT_STATUS_ACCESS_DENIED opening remote file"
+ tmpfile=$PREFIX/smbclient.in.$$
+
+ ##
+ ## We can't do this as non-root. We always have rights to
+ ## read the file.
+ ##
+ if [ "$USERID" != 0 ]; then
+ echo "skipping test_owner_only_file as non-root"
+ return 0
+ fi
+
+ ##
+ ## We can't do this with an encrypted connection. No credentials
+ ## to set up the channel.
+ ##
+ if [ "$ADDARGS" = "-e" ]; then
+ echo "skipping test_owner_only_file with encrypted connection"
+ return 0
+ fi
+
+ cat >$tmpfile <<EOF
get unreadable_file
quit
EOF
- cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U% //$SERVER/ro-tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
- eval echo "$cmd"
- out=`eval $cmd`
- ret=$?
- rm -f $tmpfile
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U% //$SERVER/ro-tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
- if [ $ret != 0 ] ; then
- echo "$out"
- echo "failed reading owner-only file with error $ret"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed reading owner-only file with error $ret"
+ return 1
+ fi
- echo "$out" | grep "$prompt" >/dev/null 2>&1
+ echo "$out" | grep "$prompt" >/dev/null 2>&1
- ret=$?
- if [ $ret = 0 ] ; then
- # got the correct prompt .. succeed
- true
- else
- echo "$out"
- echo "failed reading owner-only file - grep failed with $ret"
- false
- fi
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed reading owner-only file - grep failed with $ret"
+ return 1
+ fi
+
+ return 0
}
# Test accessing an msdfs path.
test_msdfs_link()
{
- tmpfile=$PREFIX/smbclient.in.$$
- prompt=" msdfs-target "
+ tmpfile=$PREFIX/smbclient.in.$$
+ prompt=" msdfs-target "
- cat > $tmpfile <<EOF
+ cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS -m $PROTOCOL -c dir 2>&1'
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing msfds-share\ with error $ret"
+ return 1
+ fi
+
+ cat >$tmpfile <<EOF
ls
cd \\msdfs-src1
ls msdfs-target
quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing \\msdfs-src1 link with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt" >/dev/null 2>&1
+
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\msdfs-src1 - grep failed with $ret"
+ return 1
+ fi
+
+ cat >$tmpfile <<EOF
+ls
+cd \\deeppath\\msdfs-src2
+ls msdfs-target
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing \\deeppath\\msdfs-src2 link with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt" >/dev/null 2>&1
+
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\deeppath\\msdfs-src2 - grep failed with $ret"
+ return 1
+ fi
+
+ return 0
+}
+
+# Test recursive listing across msdfs links
+test_msdfs_recursive_dir()
+{
+ tmpfile=$PREFIX/smbclient.in.$$
+
+ cat >$tmpfile <<EOF
+recurse
+dir
+quit
+EOF
+
+ cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS -m $PROTOCOL < $tmpfile 2>&1'
+ out=$(eval $cmd)
+ ret="$?"
+
+ if [ "$ret" -ne 0 ]; then
+ echo "$out"
+ echo "failed listing msfds-share\ with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS_OBJECT_PATH_NOT_FOUND listing \widelinks\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\dot\*' > /dev/null 2>&1
+
+ ret="$?"
+ if [ "$ret" -ne 0 ]; then
+ echo "$out"
+ echo "Listing \\msdfs-share recursively did not properly end in symlink recursion"
+ fi
+
+ return 0
+}
+
+# Test doing a normal file rename on an msdfs path.
+test_msdfs_rename()
+{
+ tmpfile="$PREFIX/smbclient.in.$$"
+ filename_src="src.$$"
+ filename_dst="dest.$$"
+ filename_src_path="$PREFIX/$filename_src"
+ rm -f "$filename_src_path"
+ touch "$filename_src_path"
+
+ #
+ # Use both non-force and force rename to
+ # ensure we test both codepaths inside libsmb.
+ #
+ cat >$tmpfile <<EOF
+lcd $PREFIX
+put $filename_src
+ren $filename_src $filename_dst -f
+ren $filename_dst $filename_src
+del $filename_src
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f "$tmpfile"
+ rm -f "$filename_src_path"
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed renaming $filename_src $filename_dst with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "NT_STATUS" >/dev/null 2>&1
+
+ ret="$?"
+ if [ "$ret" -eq 0 ]; then
+ echo "$out"
+ echo "renaming $filename_src $filename_dst got NT_STATUS_ error"
+ return 1
+ fi
+ return 0
+}
+
+# Test doing a normal file hardlink on an msdfs path.
+test_msdfs_hardlink()
+{
+ tmpfile="$PREFIX/smbclient.in.$$"
+ filename_src="src.$$"
+ filename_dst="dest.$$"
+ filename_src_path="$PREFIX/$filename_src"
+ rm -f "$filename_src_path"
+ touch "$filename_src_path"
+
+ cat >$tmpfile <<EOF
+lcd $PREFIX
+put $filename_src
+hardlink $filename_src $filename_dst
+del $filename_src
+del $filename_dst
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f "$tmpfile"
+ rm -f "$filename_src_path"
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed hardlink $filename_src $filename_dst with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "NT_STATUS" >/dev/null 2>&1
+
+ ret="$?"
+ if [ "$ret" -eq 0 ]; then
+ echo "$out"
+ echo "hardlink $filename_src $filename_dst got NT_STATUS_ error"
+ return 1
+ fi
+ return 0
+}
+
+test_msdfs_del()
+{
+ tmpfile="$PREFIX/smbclient.in.$$"
+ filename_src="src.$$"
+ filename_src_path="$PREFIX/$filename_src"
+ rm -f "$filename_src_path"
+ touch "$filename_src_path"
+
+ cat > $tmpfile <<EOF
+lcd $PREFIX
+cd dfshop1
+cd dfshop2
+put $filename_src
+del $filename_src
+quit
EOF
cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/msdfs-share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
eval echo "$cmd"
out=`eval $cmd`
ret=$?
- rm -f $tmpfile
+ rm -f "$tmpfile"
+ rm -f "$filename_src_path"
if [ $ret != 0 ] ; then
echo "$out"
- echo "failed accessing \\msdfs-src1 link with error $ret"
- false
- return
+ echo "failed deleting $filename_src with error $ret"
+ return 1
fi
- echo "$out" | grep "$prompt" >/dev/null 2>&1
+ echo "$out" | grep "NT_STATUS" >/dev/null 2>&1
- ret=$?
- if [ $ret != 0 ] ; then
+ ret="$?"
+ if [ "$ret" -eq 0 ] ; then
echo "$out"
- echo "failed listing \\msdfs-src1 - grep failed with $ret"
- false
+ echo "del $filename_src NT_STATUS_ error"
+ return 1
fi
+ return 0
+}
+
+test_msdfs_deltree()
+{
+ tmpfile="$PREFIX/smbclient.in.$$"
+ dirname_src="foodir.$$"
+ filename_src="src.$$"
+ filename_src_path="$PREFIX/$filename_src"
+ dirname_src_path="$PREFIX/$dirname"
+ rm -f "$filename_src_path"
+ touch "$filename_src_path"
cat > $tmpfile <<EOF
-ls
-cd \\deeppath\\msdfs-src2
-ls msdfs-target
+lcd $PREFIX
+cd dfshop1
+cd dfshop2
+mkdir $dirname_src
+cd $dirname_src
+put $filename_src
+cd ..
+deltree $dirname_src
quit
EOF
eval echo "$cmd"
out=`eval $cmd`
ret=$?
- rm -f $tmpfile
+ rm -f "$tmpfile"
+ rm -f "$filename_src_path"
+ rm -f "$dirname_src_path"
if [ $ret != 0 ] ; then
echo "$out"
- echo "failed accessing \\deeppath\\msdfs-src2 link with error $ret"
- false
- return
+ echo "deltree failed deleting dir $dirname_src with error $ret"
+ return 1
fi
- echo "$out" | grep "$prompt" >/dev/null 2>&1
+ echo "$out" | grep "NT_STATUS" >/dev/null 2>&1
- ret=$?
- if [ $ret != 0 ] ; then
+ ret="$?"
+ if [ "$ret" -eq 0 ] ; then
echo "$out"
- echo "failed listing \\deeppath\\msdfs-src2 - grep failed with $ret"
- false
- return
- else
- true
- return
+ echo "deltree $dirname_src NT_STATUS_ error"
+ return 1
fi
+ return 0
+}
+
+# Archive bits are correctly set on file/dir creation and rename.
+test_rename_archive_bit()
+{
+ prompt_file="attributes: A (20)"
+ prompt_dir="attributes: D (10)"
+ tmpfile="$PREFIX/smbclient.in.$$"
+ filename="foo.$$"
+ filename_ren="bar.$$"
+ dirname="foodir.$$"
+ dirname_ren="bardir.$$"
+ filename_path="$PREFIX/$filename"
+ local_name1="$LOCAL_PATH/$filename"
+ local_name2="$LOCAL_PATH/$filename_ren"
+ local_dir_name1="$LOCAL_PATH/$dirname"
+ local_dir_name2="$LOCAL_PATH/$dirname_ren"
+
+ rm -f $filename_path
+ rm -f $local_name1
+ rm -f $local_name2
+
+ # Create a new file, ensure it has 'A' attributes.
+ touch $filename_path
+
+ cat >$tmpfile <<EOF
+lcd $PREFIX
+put $filename
+allinfo $filename
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating file $filename with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt_file" >/dev/null 2>&1
+
+ ret=$?
+
+ rm -f $filename_path
+ rm -f $local_name1
+ rm -f $local_name2
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "Attributes incorrect on new file $ret"
+ return 1
+ fi
+
+ # Now check if we remove 'A' and rename, the A comes back.
+ touch $filename_path
+
+ cat >$tmpfile <<EOF
+lcd $PREFIX
+put $filename
+setmode $filename -a
+ren $filename $filename_ren
+allinfo $filename_ren
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating file and renaming $filename with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt_file" >/dev/null 2>&1
+
+ ret=$?
+
+ rm -f $filename_path
+ rm -f $local_name1
+ rm -f $local_name2
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "Attributes incorrect on renamed file $ret"
+ return 1
+ fi
+
+ rm -rf $local_dir_name1
+ rm -rf $local_dir_name2
+
+ # Create a new directory, ensure it has 'D' but not 'A' attributes.
+
+ cat >$tmpfile <<EOF
+mkdir $dirname
+allinfo $dirname
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating directory $dirname with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt_dir" >/dev/null 2>&1
+
+ ret=$?
+
+ rm -rf $local_dir_name1
+ rm -rf $local_dir_name2
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "Attributes incorrect on new directory $ret"
+ return 1
+ fi
+
+ # Now check if we rename, we still only have 'D' attributes
+
+ cat >$tmpfile <<EOF
+mkdir $dirname
+ren $dirname $dirname_ren
+allinfo $dirname_ren
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating directory $dirname and renaming with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "$prompt_dir" >/dev/null 2>&1
+
+ ret=$?
+
+ rm -f $local_name1
+ rm -f $local_name2
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "Attributes incorrect on renamed directory $ret"
+ return 1
+ fi
+
+ return 0
}
# Test authenticating using the winbind ccache
test_ccache_access()
{
- $WBINFO --ccache-save="${USERNAME}%${PASSWORD}"
- $SMBCLIENT //$SERVER_IP/tmp -C -U "${USERNAME}%" \
- -c quit 2>&1
- ret=$?
+ $WBINFO --ccache-save="${USERNAME}%${PASSWORD}"
+ ret=$?
- if [ $ret != 0 ] ; then
- echo "smbclient failed to use cached credentials"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "wbinfo failed to store creds in cache (user='${USERNAME}', pass='${PASSWORD}')"
+ return 1
+ fi
- $WBINFO --ccache-save="${USERNAME}%GarBage"
- $SMBCLIENT //$SERVER_IP/tmp -C -U "${USERNAME}%" \
- -c quit 2>&1
- ret=$?
+ $SMBCLIENT //$SERVER_IP/tmp --use-winbind-ccache -U "${USERNAME}" $ADDARGS -c quit 2>&1
+ ret=$?
- if [ $ret -eq 0 ] ; then
- echo "smbclient succeeded with wrong cached credentials"
- false
- return
- fi
+ if [ $ret != 0 ]; then
+ echo "smbclient failed to use cached credentials"
+ return 1
+ fi
- $WBINFO --logoff
+ $WBINFO --ccache-save="${USERNAME}%GarBage"
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "wbinfo failed to store creds in cache (user='${USERNAME}', pass='GarBage')"
+ return 1
+ fi
+
+ $SMBCLIENT //$SERVER_IP/tmp --use-winbind-ccache -U "${USERNAME}" $ADDARGS -c quit 2>&1
+ ret=$?
+
+ if [ $ret -eq 0 ]; then
+ echo "smbclient succeeded with wrong cached credentials"
+ return 1
+ fi
+
+ $WBINFO --logoff
}
+# Test authenticating using the winbind ccache
+test_auth_file()
+{
+ tmpfile=$PREFIX/smbclient.in.$$
+ cat >$tmpfile <<EOF
+username=${USERNAME}
+password=${PASSWORD}
+domain=${DOMAIN}
+EOF
+ $SMBCLIENT //$SERVER_IP/tmp --authentication-file=$tmpfile $ADDARGS -c quit 2>&1
+ ret=$?
+ rm $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "smbclient failed to use auth file"
+ return 1
+ fi
+
+ cat >$tmpfile <<EOF
+username=${USERNAME}
+password=xxxx
+domain=${DOMAIN}
+EOF
+ $SMBCLIENT //$SERVER_IP/tmp --authentication-file=$tmpfile $ADDARGS -c quit 2>&1
+ ret=$?
+ rm $tmpfile
+
+ if [ $ret -eq 0 ]; then
+ echo "smbclient succeeded with wrong auth file credentials"
+ return 1
+ fi
+}
+
+# Test doing a directory listing with backup privilege.
+test_backup_privilege_list()
+{
+ tmpfile=$PREFIX/smbclient_backup_privilege_list
+
+ # selftest uses the forward slash as a separator, but "net sam rights
+ # grant" requires the backslash separator
+ USER_TMP=$(printf '%s' "$USERNAME" | tr '/' '\\')
+
+ # If we don't have a DOMAIN component to the username, add it.
+ printf '%s' "$USER_TMP" | grep '\\' 2>&1
+ ret=$?
+ if [ $ret != 0 ]; then
+ priv_username="$DOMAIN\\$USER_TMP"
+ else
+ priv_username="$USER_TMP"
+ fi
+
+ $NET sam rights grant $priv_username SeBackupPrivilege 2>&1
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "Failed to add SeBackupPrivilege to user $priv_username - $ret"
+ return 1
+ fi
+
+ cat >$tmpfile <<EOF
+backup
+ls
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed backup privilege list $ret"
+ return 1
+ fi
+
+ # Now remove all privileges from this SID.
+ $NET sam rights revoke $priv_username SeBackupPrivilege 2>&1
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "failed to remove SeBackupPrivilege from user $priv_username - $ret"
+ return 1
+ fi
+}
+
+# Test accessing an share with bad names (won't convert).
+test_bad_names()
+{
+ # First with SMB1
+
+ if [ $PROTOCOL = "NT1" ]; then
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/badname-tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL -c ls 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing badname-tmp (SMB1) with error $ret"
+ return 1
+ fi
+
+ echo "$out" | wc -l 2>&1 | grep 5
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep of number of lines (1) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ \. *D'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep (1) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ \.\. *D'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep (2) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ blank.txt *N'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep (3) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ *$'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep (4) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'blocks of size.*blocks available'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - grep (5) failed with $ret"
+ return 1
+ fi
+ fi
+
+ if [ $PROTOCOL = "SMB3" ]; then
+
+ # Now check again with -mSMB3
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/badname-tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL -c ls 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing badname-tmp (SMB3) with error $ret"
+ return 1
+ fi
+
+ echo "$out" | wc -l 2>&1 | grep 5
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep of number of lines (1) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ \. *D'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep (1) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ \.\. *D'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep (2) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ blank.txt *N'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep (3) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^ *$'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep (4) failed with $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'blocks of size.*blocks available'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed listing \\badname-tmp - SMB3 grep (5) failed with $ret"
+ return 1
+ fi
+ fi
+}
+
+# Test accessing an share with a name that must be mangled - with acl_xattrs.
+# We know foo:bar gets mangled to FF4GBY~Q with the default name-mangling algorithm (hash2).
+test_mangled_names()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+ls
+cd FF4GBY~Q
+ls
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/manglenames_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing manglenames_share with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS'
+ ret=$?
+ if [ $ret = 0 ]; then
+ echo "$out"
+ echo "failed - NT_STATUS_XXXX listing \\manglenames_share\\FF4GBY~Q"
+ return 1
+ fi
+}
+
+# Test using scopy to copy a file on the server.
+test_scopy()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ scopy_file=$PREFIX/scopy_file
+
+ rm -f $scopy_file
+ cat >$tmpfile <<EOF
+put ${SMBCLIENT}
+scopy smbclient scopy_file
+lcd ${PREFIX}
+get scopy_file
+del smbclient
+del scopy_file
+quit
+EOF
+ if [ $PROTOCOL = "SMB3" ]; then
+ # First SMB3
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -m$PROTOOCL < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ out1=$(md5sum ${SMBCLIENT} | sed -e 's/ .*//')
+ out2=$(md5sum ${scopy_file} | sed -e 's/ .*//')
+ rm -f $tmpfile
+ rm -f $scopy_file
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed scopy test (1) with output $ret"
+ return 1
+ fi
+
+ if [ $out1 != $out2 ]; then
+ echo "$out1 $out2"
+ echo "failed md5sum (1)"
+ return 1
+ fi
+ fi
+ #
+ # Now do again using SMB1
+ # to force client-side fallback.
+ #
+
+ if [ $PROTOCOL = "NT1" ]; then
+ cat >$tmpfile <<EOF
+put ${SMBCLIENT}
+scopy smbclient scopy_file
+lcd ${PREFIX}
+get scopy_file
+del smbclient
+del scopy_file
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -m$PROTOCOL < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ out1=$(md5sum ${SMBCLIENT} | sed -e 's/ .*//')
+ out2=$(md5sum ${scopy_file} | sed -e 's/ .*//')
+ rm -f $tmpfile
+ rm -f $scopy_file
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed scopy test (2) with output $ret"
+ return 1
+ fi
+
+ if [ $out1 != $out2 ]; then
+ echo "$out1 $out2"
+ echo "failed md5sum (2)"
+ return 1
+ fi
+ fi
+}
+
+# Test creating a stream on the root of the share directory filename - :foobar
+test_toplevel_stream()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+put ${PREFIX}/smbclient_interactive_prompt_commands :foobar
+allinfo \\
+setmode \\ -a
+quit
+EOF
+ # Only with SMB3???
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -mSMB3 < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating toplevel stream :foobar with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^stream:.*:foobar'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating toplevel stream :foobar"
+ return 1
+ fi
+}
+
+# Test wide links are restricted.
+test_widelinks()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+cd dot
+ls
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/widelinks_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing widelinks_share with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS'
+ ret=$?
+ if [ $ret = 0 ]; then
+ echo "$out"
+ echo "failed - NT_STATUS_XXXX listing \\widelinks_share\\dot"
+ return 1
+ fi
+
+ cat >$tmpfile <<EOF
+allinfo source
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/widelinks_share -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed accessing widelinks_share with error $ret"
+ return 1
+ fi
+
+ # This should fail with NT_STATUS_OBJECT_NAME_NOT_FOUND
+ echo "$out" | grep 'NT_STATUS_OBJECT_NAME_NOT_FOUND'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed - should get NT_STATUS_OBJECT_NAME_NOT_FOUND listing \\widelinks_share\\source"
+ return 1
+ fi
+}
+
+# Test creating then deleting a stream file doesn't leave a lost-XXXXX directory.
+test_streams_depot_delete()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ rm -rf "$LOCAL_PATH/lost-*"
+
+ cat >$tmpfile <<EOF
+put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
+del foo
+ls lost*
+quit
+EOF
+ # This only works with SMB3?
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS -mSMB3 < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed creating then deleting foo:bar with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS_NO_SUCH_FILE listing \\lost\*'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "deleting foo:bar left lost-XXX directory"
+ rm -rf "$LOCAL_PATH/lost-*"
+ return 1
+ fi
+}
+
+# Test follow symlinks can't access symlinks
+test_nosymlinks()
+{
+ # Setup test dirs.
+ local_test_dir="$LOCAL_PATH/nosymlinks/test"
+ local_slink_name="$local_test_dir/source"
+ local_slink_target="$local_test_dir/nosymlink_target_file"
+
+ share_test_dir="test"
+ share_foo_dir="$share_test_dir/foo"
+ share_foobar_dir="$share_test_dir/foo/bar"
+ share_target_file="$share_test_dir/foo/bar/testfile"
+
+ rm -rf $local_test_dir
+
+ local_nosymlink_target_file="nosymlink_target_file"
+ echo "$local_slink_target" >$PREFIX/$local_nosymlink_target_file
+
+ local_foobar_target_file="testfile"
+ echo "$share_target_file" >$PREFIX/$local_foobar_target_file
+
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+mkdir $share_test_dir
+mkdir $share_foo_dir
+mkdir $share_foobar_dir
+lcd $PREFIX
+cd /$share_test_dir
+put $local_nosymlink_target_file
+cd /$share_foobar_dir
+put $local_foobar_target_file
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+ rm -f $PREFIX/$local_nosymlink_target_file
+ rm -f $PREFIX/$local_foobar_target_file
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing local_symlinks with error $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'NT_STATUS_'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - got an NT_STATUS error"
+ false
+ return
+ fi
+
+ # Create the symlink locally
+ ln -s $local_slink_target $local_slink_name
+
+ # Getting a file through a symlink name should fail.
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+get test\\source
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing nosymlinks with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS_OBJECT_NAME_NOT_FOUND'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed - should get NT_STATUS_OBJECT_NAME_NOT_FOUND getting \\nosymlinks\\source"
+ return 1
+ fi
+
+ # But we should be able to create and delete directories.
+ cat >$tmpfile <<EOF
+mkdir test\\a
+mkdir test\\a\\b
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing nosymlinks with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - NT_STATUS_XXXX doing mkdir a; mkdir a\\b on \\nosymlinks"
+ return 1
+ fi
+
+ # Ensure regular file/directory access also works.
+ cat >$tmpfile <<EOF
+cd test\\foo\\bar
+ls
+get testfile -
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing nosymlinks with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - NT_STATUS_XXXX doing cd foo\\bar; get testfile on \\nosymlinks"
+ return 1
+ fi
+
+ # CLEANUP
+ rm -f $local_slink_name
+
+ cat >$tmpfile <<EOF
+deltree test
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/nosymlinks -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing nosymlinks with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'NT_STATUS'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - NT_STATUS_XXXX doing cd foo\\bar; get testfile on \\nosymlinks"
+ return 1
+ fi
+}
+
+# Test we can follow normal symlinks.
+# Bug: https://bugzilla.samba.org/show_bug.cgi?id=12860
+# Note - this needs to be tested over SMB3, not SMB1.
+
+test_local_symlinks()
+{
+ # Setup test dirs.
+ LOCAL_RAWARGS="${CONFIGURATION} -mSMB3"
+ LOCAL_ADDARGS="${LOCAL_RAWARGS} $*"
+
+ share_test_dir="test"
+ share_slink_target_dir="$share_test_dir/dir1"
+
+ local_test_dir="$LOCAL_PATH/local_symlinks/$share_test_dir"
+ local_slink_name="$local_test_dir/sym_name"
+ local_slink_target_dir="$local_test_dir/dir1"
+
+ rm -rf $local_test_dir
+
+ # Create the initial directories
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+mkdir $share_test_dir
+mkdir $share_slink_target_dir
+quit
+EOF
+
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing local_symlinks with error $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'NT_STATUS_'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - got an NT_STATUS error"
+ false
+ return
+ fi
+
+ # Create the symlink locally
+ ln -s $local_slink_target_dir $local_slink_name
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed - unable to create symlink"
+ ls -la $local_test_dir
+ false
+ return
+ fi
+
+ # Can we cd into the symlink name and ls ?
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+cd $share_test_dir\\sym_name
+ls
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing local_symlinks with error $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'NT_STATUS_'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - got an NT_STATUS error"
+ false
+ return
+ fi
+
+ # CLEANUP
+ rm -f $local_slink_name
+
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+deltree $share_test_dir
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/local_symlinks -I $SERVER_IP $LOCAL_ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed accessing local_symlinks with error $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'NT_STATUS_'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - got an NT_STATUS error"
+ false
+ return
+ fi
+}
+
+#
+# Regression test for CVE-2019-10197
+# we should always get ACCESS_DENIED
+#
+test_noperm_share_regression()
+{
+ cmd='$SMBCLIENT -U$USERNAME%$PASSWORD //$SERVER/noperm -I $SERVER_IP $LOCAL_ADDARGS -c "ls;ls" 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed accessing no perm share should not work"
+ return 1
+ fi
+
+ num=$(echo "$out" | grep 'NT_STATUS_ACCESS_DENIED' | wc -l)
+ if [ "$num" -ne "2" ]; then
+ echo "$out"
+ echo "failed num[$num] - two NT_STATUS_ACCESS_DENIED lines expected"
+ return 1
+ fi
+
+ return 0
+}
+
+# Test smbclient deltree command
+test_deltree()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ deltree_dir=$PREFIX/deltree_dir
+
+ rm -rf $deltree_dir
+ cat >$tmpfile <<EOF
+mkdir deltree_dir
+mkdir deltree_dir/foo
+mkdir deltree_dir/foo/bar
+put ${SMBCLIENT} deltree_dir/foo/bar/client
+deltree deltree_dir
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed deltree test with output $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'NT_STATUS_'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo "failed - got an NT_STATUS error"
+ false
+ return
+ fi
+
+ if [ -d $deltree_dir ]; then
+ echo "deltree did not delete everything"
+ false
+ return
+ fi
+}
+
+# Test smbclient setmode command
+test_setmode()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+
+ cat >$tmpfile <<EOF
+del test_setmode
+put ${SMBCLIENT} test_setmode
+setmode test_setmode +r +s +h +a
+allinfo test_setmode
+setmode test_setmode -rsha
+allinfo test_setmode
+del test_setmode
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed setmode test with output $ret"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'attributes: RHSA'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed - should get attributes: RHSA"
+ false
+ return
+ fi
+
+ echo "$out" | grep 'attributes: (80)'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed - should also get attributes: (80)"
+ false
+ return
+ fi
+}
+
+# Test smbclient utimes command
+test_utimes()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+
+ saved_TZ="$TZ"
+ TZ=UTC
+ export TZ
+ saved_LANG="$LANG"
+ LANG=C
+ export LANG
+
+ cat >$tmpfile <<EOF
+del utimes_test
+put ${SMBCLIENT} utimes_test
+allinfo utimes_test
+utimes utimes_test 2016:02:04-06:19:20 17:01:01-05:10:20 -1 -1
+allinfo utimes_test
+del utimes_test
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ -n "$saved_TZ" ]; then
+ export TZ="$saved_TZ"
+ else
+ unset TZ
+ fi
+ if [ -n "$saved_LANG" ]; then
+ export LANG="$saved_LANG"
+ else
+ unset LANG
+ fi
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed utimes test with output $ret"
+ false
+ return
+ fi
+
+ # Now, we should have 2 identical write_time and change_time
+ # values, but one access_time of Jan 1 05:10:20 AM,
+ # and one create_time of Feb 04 06:19:20 AM 2016
+ out_sorted=$(echo "$out" | sort | uniq)
+ num_create=$(echo "$out_sorted" | grep -c 'create_time:')
+ num_access=$(echo "$out_sorted" | grep -c 'access_time:')
+ num_write=$(echo "$out_sorted" | grep -c 'write_time:')
+ num_change=$(echo "$out_sorted" | grep -c 'change_time:')
+ if [ "$num_create" != "2" ]; then
+ echo "failed - should get two create_time $out"
+ false
+ return
+ fi
+ if [ "$num_access" != "2" ]; then
+ echo "failed - should get two access_time $out"
+ false
+ return
+ fi
+ if [ "$num_write" != "1" ]; then
+ echo "failed - should only get one write_time $out"
+ false
+ return
+ fi
+ if [ "$num_change" != "1" ]; then
+ echo "failed - should only get one change_time $out"
+ false
+ return
+ fi
+
+ # This could be: Sun Jan 1 05:10:20 AM 2017
+ # or : Sun Jan 1 05:10:20 2017 CET
+ echo "$out" | grep 'access_time:.*Sun Jan.*1 05:10:20 .*2017.*'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo
+ echo "failed - should get access_time: Sun Jan 1 05:10:20 [AM] 2017"
+ false
+ return
+ fi
+
+ # This could be: Thu Feb 4 06:19:20 AM 2016
+ # or : Thu Feb 4 06:19:20 2016 CET
+ echo "$out" | grep 'create_time:.*Thu Feb.*4 06:19:20 .*2016.*'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo
+ echo "failed - should get access_time: Thu Feb 4 06:19:20 [AM] 2016"
+ false
+ return
+ fi
+}
+
+# Test smbclient renames with pathnames containing '..'
+test_rename_dotdot()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+
+ cat >$tmpfile <<EOF
+deltree dotdot_test
+mkdir dotdot_test
+cd dotdot_test
+mkdir dir1
+mkdir dir2
+cd dir1
+put ${SMBCLIENT} README
+rename README ..\\dir2\\README
+cd ..
+cd dir2
+allinfo README
+cd \\
+deltree dotdot_test
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed rename_dotdot test with output $ret"
+ false
+ return
+ fi
+
+ # We are allowed to get NT_STATUS_NO_SUCH_FILE listing \dotdot_test
+ # as the top level directory should not exist, but no other errors.
+
+ error_str=$(echo $out | grep NT_STATUS | grep -v "NT_STATUS_NO_SUCH_FILE listing .dotdot_test")
+ if [ "$error_str" != "" ]; then
+ echo "failed - unexpected NT_STATUS error in $out"
+ false
+ return
+ fi
+}
+
+# Test doing a volume command.
+test_volume()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+volume
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed doing volume command with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep '^Volume: |tmp| serial number'
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed doing volume command"
+ return 1
+ fi
+}
+
+test_server_os_message()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+ls
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed to connect error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'Try "help" to get a list of possible commands.'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo 'failed - should get: Try "help" to get a list of possible commands.'
+ return 1
+ fi
+
+ return 0
+}
+
+test_server_quiet_message()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+ls
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS --quiet < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "failed to connect error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep 'Try "help" to get a list of possible commands.'
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "$out"
+ echo 'failed - quiet should skip this message.'
+ return 1
+ fi
+
+ return 0
+}
+
+# Test xattr_stream correctly reports mode.
+# BUG: https://bugzilla.samba.org/show_bug.cgi?id=13380
+
+test_stream_directory_xattr()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ #
+ # Test against streams_xattr
+ #
+ cat >$tmpfile <<EOF
+deltree foo
+mkdir foo
+put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
+setmode foo -a
+allinfo foo:bar
+deltree foo
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/streams_xattr -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed checking attributes on xattr stream foo:bar with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "attributes:.*80"
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed checking attributes on xattr stream foo:bar"
+ return 1
+ fi
+
+ #
+ # Test against streams_depot
+ #
+ cat >$tmpfile <<EOF
+deltree foo
+mkdir foo
+put ${PREFIX}/smbclient_interactive_prompt_commands foo:bar
+setmode foo -a
+allinfo foo:bar
+deltree foo
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed checking attributes on depot stream foo:bar with error $ret"
+ return 1
+ fi
+
+ echo "$out" | grep "attributes:.*80"
+ ret=$?
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed checking attributes on depot stream foo:bar"
+ return 1
+ fi
+}
+
+# Test smbclient non-empty rmdir command
+test_del_nedir()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ del_nedir="$LOCAL_PATH/del_nedir"
+
+ rm -rf $del_nedir
+ mkdir $del_nedir
+ touch $del_nedir/afile
+ cat >$tmpfile <<EOF
+rmdir del_nedir
+quit
+EOF
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -I $SERVER_IP $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -rf $del_nedir
+
+ if [ $ret != 0 ]; then
+ echo "$out"
+ echo "failed test_del_nedir test with output $ret"
+ false
+ return
+ fi
+
+ # Should get NT_STATUS_DIRECTORY_NOT_EMPTY error from rmdir
+ echo "$out" | grep 'NT_STATUS_DIRECTORY_NOT_EMPTY'
+ ret=$?
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_del_nedir failed - should get an NT_STATUS_DIRECTORY_NOT_EMPTY error"
+ false
+ return
+ fi
+}
+
+test_valid_users()
+{
+ tmpfile=$PREFIX/smbclient_interactive_prompt_commands
+ cat >$tmpfile <<EOF
+ls
+quit
+EOF
+ # User in "valid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users 'User in 'valid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # User from ad group in "valid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_group $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users_group 'User from ad group in 'valid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # User from UNIX group in "valid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_unix_group $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users_unix_group 'User from UNIX group in 'valid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # User not in NIS group in "valid users" can't login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_nis_group $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users_nis_group 'User not in NIS group in 'valid users' can't login to service' failed - $ret"
+ return 1
+ fi
+
+ # Check user in UNIX, then in NIS group in "valid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_unix_nis_group $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users_unix_nis_group 'Check user in UNIX, then in NIS group in 'valid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # Check user in NIS, then in UNIX group in "valid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_users_nis_unix_group $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_users_nis_unix_group 'Check user in NIS, then in UNIX group in 'valid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # User not in "invalid users" can login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -Ualice%Secret007 //$SERVER/invalid_users $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:invalid_users 'User not in 'invalid users' can login to service' failed - $ret"
+ return 1
+ fi
+
+ # User in "invalid users" can't login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/invalid_users $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:invalid_users 'User in 'invalid users' can't login to service' failed - $ret"
+ return 1
+ fi
+
+ # User is in "valid and invalid users" can't login to service
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -U$DC_USERNAME%$DC_PASSWORD //$SERVER/valid_and_invalid_users $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ echo "$out" | grep 'NT_STATUS_ACCESS_DENIED'
+ ret=$?
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_and_invalid_users 'User is in 'valid and invalid users' can't login to service' failed - $ret"
+ return 1
+ fi
+
+ # 2 Users are in "valid users"
+ cmd='CLI_FORCE_INTERACTIVE=yes $SMBCLIENT "$@" -Ualice%Secret007 //$SERVER/valid_and_invalid_users $ADDARGS < $tmpfile 2>&1'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ ret=$?
+ rm -f $tmpfile
+
+ if [ $ret -ne 0 ]; then
+ echo "$out"
+ echo "test_valid_users:valid_and_invalid_users '2 Users are in 'valid users'' failed - $ret"
+ return 1
+ fi
+
+ return 0
+}
+
+test_smbclient_minus_e_stderr()
+{
+ cmd='$SMBCLIENT "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -c ls'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ if [ $? != 0 ]; then
+ echo "$out"
+ echo "command failed"
+ return 1
+ fi
+
+ # test smbclient 'ls' command output went to stdout
+ echo "$out" | grep "blocks available" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ # didn't get output to stdout
+ echo "expected output was NOT output to stdout"
+ return 1
+ fi
+
+ # this time execute ls but redirect stdout alone to /dev/null
+ cmd='$SMBCLIENT -E "$@" -U$USERNAME%$PASSWORD //$SERVER/tmp -c "ls" 2>&1 > /dev/null'
+ eval echo "$cmd"
+ out=$(eval $cmd)
+ if [ $? != 0 ]; then
+ echo "$out"
+ echo "command failed"
+ return 1
+ fi
+
+ # test smbclient 'ls' command output went to stderr
+ echo "$out" | grep "blocks available" >/dev/null 2>&1
+ if [ $? != 0 ]; then
+ # didn't get output to stderr
+ echo "expected output was NOT output to stderr"
+ return 1
+ fi
+
+ return 0
+
+}
+
+#
+#
LOGDIR_PREFIX=test_smbclient_s3
# possibly remove old logdirs:
-for OLDDIR in $(find ${PREFIX} -type d -name "${LOGDIR_PREFIX}_*") ; do
+for OLDDIR in $(find ${PREFIX} -type d -name "${LOGDIR_PREFIX}_*"); do
echo "removing old directory ${OLDDIR}"
rm -rf ${OLDDIR}
done
-LOGDIR=$(mktemp -d ${PREFIX}/${LOGDIR_PREFIX}_XXXX)
+LOGDIR=$(mktemp -d ${PREFIX}/${LOGDIR_PREFIX}_XXXXXX)
-
-testit "smbclient -L $SERVER_IP" $SMBCLIENT -L $SERVER_IP -N -p 139 || failed=`expr $failed + 1`
-testit "smbclient -L $SERVER -I $SERVER_IP" $SMBCLIENT -L $SERVER -I $SERVER_IP -N -p 139 -c quit || failed=`expr $failed + 1`
+testit "smbclient -L $SERVER_IP" $SMBCLIENT -L $SERVER_IP -N -p 139 ${RAWARGS} || failed=$(expr $failed + 1)
+testit "smbclient -L $SERVER -I $SERVER_IP" $SMBCLIENT -L $SERVER -I $SERVER_IP -N -p 139 ${RAWARGS} -c quit || failed=$(expr $failed + 1)
testit "noninteractive smbclient does not prompt" \
- test_noninteractive_no_prompt || \
- failed=`expr $failed + 1`
+ test_noninteractive_no_prompt ||
+ failed=$(expr $failed + 1)
testit "noninteractive smbclient -l does not prompt" \
- test_noninteractive_no_prompt -l $LOGDIR || \
- failed=`expr $failed + 1`
+ test_noninteractive_no_prompt -l $LOGDIR ||
+ failed=$(expr $failed + 1)
+
+testit "smbclient output goes to stderr when -E is passed" \
+ test_smbclient_minus_e_stderr ||
+ failed=$(expr $failed + 1)
testit "interactive smbclient prompts on stdout" \
- test_interactive_prompt_stdout || \
- failed=`expr $failed + 1`
+ test_interactive_prompt_stdout ||
+ failed=$(expr $failed + 1)
testit "interactive smbclient -l prompts on stdout" \
- test_interactive_prompt_stdout -l $LOGDIR || \
- failed=`expr $failed + 1`
+ test_interactive_prompt_stdout -l $LOGDIR ||
+ failed=$(expr $failed + 1)
testit "creating a bad symlink and deleting it" \
- test_bad_symlink || \
- failed=`expr $failed + 1`
+ test_bad_symlink ||
+ failed=$(expr $failed + 1)
testit "creating a good symlink and deleting it by path" \
- test_good_symlink || \
- failed=`expr $failed + 1`
+ test_good_symlink ||
+ failed=$(expr $failed + 1)
testit "writing into a read-only directory fails" \
- test_read_only_dir || \
- failed=`expr $failed + 1`
+ test_read_only_dir ro-tmp ||
+ failed=$(expr $failed + 1)
+
+testit "writing into a read-only share fails" \
+ test_read_only_dir valid-users-tmp ||
+ failed=$(expr $failed + 1)
testit "Reading a owner-only file fails" \
- test_owner_only_file || \
- failed=`expr $failed + 1`
+ test_owner_only_file ||
+ failed=$(expr $failed + 1)
testit "Accessing an MS-DFS link" \
- test_msdfs_link || \
- failed=`expr $failed + 1`
+ test_msdfs_link ||
+ failed=$(expr $failed + 1)
-testit "ccache access works for smbclient" \
- test_ccache_access || \
+testit "Recursive ls across MS-DFS links" \
+ test_msdfs_recursive_dir ||
+ failed=$(expr $failed + 1)
+
+testit "Rename on MS-DFS share" \
+ test_msdfs_rename ||
+ failed=$(expr $failed + 1)
+
+testit "Hardlink on MS-DFS share" \
+ test_msdfs_hardlink ||
+ failed=$(expr $failed + 1)
+
+testit "del on MS-DFS share" \
+ test_msdfs_del || \
failed=`expr $failed + 1`
-testit "rm -rf $LOGDIR" \
- rm -rf $LOGDIR || \
+testit "deltree on MS-DFS share" \
+ test_msdfs_deltree || \
failed=`expr $failed + 1`
+testit "Ensure archive bit is set correctly on file/dir rename" \
+ test_rename_archive_bit ||
+ failed=$(expr $failed + 1)
+
+testit "ccache access works for smbclient" \
+ test_ccache_access ||
+ failed=$(expr $failed + 1)
+
+testit "sending a message to the remote server" \
+ test_message ||
+ failed=$(expr $failed + 1)
+
+testit "using an authentication file" \
+ test_auth_file ||
+ failed=$(expr $failed + 1)
+
+testit "list with backup privilege" \
+ test_backup_privilege_list ||
+ failed=$(expr $failed + 1)
+
+testit "list a share with bad names (won't convert)" \
+ test_bad_names ||
+ failed=$(expr $failed + 1)
+
+testit "list a share with a mangled name + acl_xattr object" \
+ test_mangled_names ||
+ failed=$(expr $failed + 1)
+
+testit "server-side file copy" \
+ test_scopy ||
+ failed=$(expr $failed + 1)
+
+testit "creating a :stream at root of share" \
+ test_toplevel_stream ||
+ failed=$(expr $failed + 1)
+
+testit "Ensure widelinks are restricted" \
+ test_widelinks ||
+ failed=$(expr $failed + 1)
+
+testit "streams_depot can delete correctly" \
+ test_streams_depot_delete ||
+ failed=$(expr $failed + 1)
+
+testit "stream_xattr attributes" \
+ test_stream_directory_xattr ||
+ failed=$(expr $failed + 1)
+
+testit "follow symlinks = no" \
+ test_nosymlinks ||
+ failed=$(expr $failed + 1)
+
+testit "follow local symlinks" \
+ test_local_symlinks ||
+ failed=$(expr $failed + 1)
+
+testit "noperm share regression" \
+ test_noperm_share_regression ||
+ failed=$(expr $failed + 1)
+
+testit "smbclient deltree command" \
+ test_deltree ||
+ failed=$(expr $failed + 1)
+
+testit "server os message" \
+ test_server_os_message ||
+ failed=$(expr $failed + 1)
+
+testit "test server quiet message" \
+ test_server_quiet_message ||
+ failed=$(expr $failed + 1)
+
+testit "setmode test" \
+ test_setmode ||
+ failed=$(expr $failed + 1)
+
+testit "utimes" \
+ test_utimes ||
+ failed=$(expr $failed + 1)
+
+testit "rename_dotdot" \
+ test_rename_dotdot ||
+ failed=$(expr $failed + 1)
+
+testit "volume" \
+ test_volume ||
+ failed=$(expr $failed + 1)
+
+testit "rm -rf $LOGDIR" \
+ rm -rf $LOGDIR ||
+ failed=$(expr $failed + 1)
+
+testit "delete a non empty directory" \
+ test_del_nedir ||
+ failed=$(expr $failed + 1)
+
+testit "valid users" \
+ test_valid_users ||
+ failed=$(expr $failed + 1)
+
testok $0 $failed
git.samba.org / samba.git / blobdiff