#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
/ {
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_gpu_s0>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
- pins = "gpio_pwrctrl2";
+ pins = "gpio_pwrctrl1";
function = "pin_fun0";
};
status = "okay";
};
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
&u2phy2 {
status = "okay";
};
status = "okay";
};
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
+
&usb_host0_ehci {
status = "okay";
};
status = "okay";
};
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+ status = "okay";
+
+ port {
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
&usb_host1_ehci {
status = "okay";
};