2 Unix SMB/Netbios implementation.
4 read/write to a files_struct
5 Copyright (C) Andrew Tridgell 1992-1998
6 Copyright (C) Jeremy Allison 2000-2002. - write cache.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 static BOOL setup_write_cache(files_struct *, SMB_OFF_T);
27 /****************************************************************************
28 Seek a file. Try to avoid the seek if possible.
29 ****************************************************************************/
31 SMB_OFF_T seek_file(files_struct *fsp,SMB_OFF_T pos)
36 if (fsp->print_file && lp_postscript(fsp->conn->service))
39 seek_ret = fsp->conn->vfs_ops.lseek(fsp,fsp->fd,pos+offset,SEEK_SET);
42 DEBUG(0,("seek_file: (%s) sys_lseek failed. Error was %s\n",
43 fsp->fsp_name, strerror(errno) ));
48 fsp->pos = seek_ret - offset;
50 DEBUG(10,("seek_file (%s): requested pos = %.0f, new pos = %.0f\n",
51 fsp->fsp_name, (double)(pos+offset), (double)fsp->pos ));
56 /****************************************************************************
57 Read from write cache if we can.
58 ****************************************************************************/
61 BOOL read_from_write_cache(files_struct *fsp,char *data,SMB_OFF_T pos,size_t n)
63 write_cache *wcp = fsp->wcp;
68 if(n > wcp->data_size || pos < wcp->offset || pos + n > wcp->offset + wcp->data_size)
71 memcpy(data, wcp->data + (pos - wcp->offset), n);
73 DO_PROFILE_INC(writecache_read_hits);
78 /****************************************************************************
80 ****************************************************************************/
82 ssize_t read_file(files_struct *fsp,char *data,SMB_OFF_T pos,size_t n)
84 ssize_t ret=0,readret;
86 /* you can't read from print files */
91 * Serve from write cache if we can.
94 if(read_from_write_cache(fsp, data, pos, n))
97 flush_write_cache(fsp, READ_FLUSH);
99 if (seek_file(fsp,pos) == -1) {
100 DEBUG(3,("read_file: Failed to seek to %.0f\n",(double)pos));
108 readret = fsp->conn->vfs_ops.read(fsp,fsp->fd,data,n);
110 if ((errno == EAGAIN) && numretries) {
111 DEBUG(3,("read_file EAGAIN retry in 10 seconds\n"));
118 #else /* NO DMF fix. */
119 readret = fsp->conn->vfs_ops.read(fsp,fsp->fd,data,n);
127 DEBUG(10,("read_file (%s): pos = %.0f, size = %lu, returned %lu\n",
128 fsp->fsp_name, (double)pos, (unsigned long)n, (long)ret ));
133 /* how many write cache buffers have been allocated */
134 static unsigned int allocated_write_caches;
136 /****************************************************************************
137 *Really* write to a file.
138 ****************************************************************************/
140 static ssize_t real_write_file(files_struct *fsp,char *data,SMB_OFF_T pos, size_t n)
144 if ((pos != -1) && (seek_file(fsp,pos) == -1))
147 ret = vfs_write_data(fsp,data,n);
149 DEBUG(10,("real_write_file (%s): pos = %.0f, size = %lu, returned %ld\n",
150 fsp->fsp_name, (double)pos, (unsigned long)n, (long)ret ));
155 /****************************************************************************
157 ****************************************************************************/
159 ssize_t write_file(files_struct *fsp, char *data, SMB_OFF_T pos, size_t n)
161 write_cache *wcp = fsp->wcp;
162 ssize_t total_written = 0;
166 return print_job_write(fsp->print_jobid, data, n);
168 if (!fsp->can_write) {
173 if (!fsp->modified) {
175 fsp->modified = True;
177 if (fsp->conn->vfs_ops.fstat(fsp,fsp->fd,&st) == 0) {
178 int dosmode = dos_mode(fsp->conn,fsp->fsp_name,&st);
179 fsp->size = st.st_size;
180 if (MAP_ARCHIVE(fsp->conn) && !IS_DOS_ARCHIVE(dosmode))
181 file_chmod(fsp->conn,fsp->fsp_name,dosmode | aARCH,&st);
184 * If this is the first write and we have an exclusive oplock then setup
188 if (EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type) && !wcp) {
189 setup_write_cache(fsp, st.st_size);
196 DO_PROFILE_INC(writecache_total_writes);
197 if (!fsp->oplock_type) {
198 DO_PROFILE_INC(writecache_non_oplock_writes);
203 * If this file is level II oplocked then we need
204 * to grab the shared memory lock and inform all
205 * other files with a level II lock that they need
206 * to flush their read caches. We keep the lock over
207 * the shared memory area whilst doing this.
210 release_level_2_oplocks_on_change(fsp);
213 if (profile_p && profile_p->writecache_total_writes % 500 == 0) {
214 DEBUG(3,("WRITECACHE: initwrites=%u abutted=%u total=%u \
215 nonop=%u allocated=%u active=%u direct=%u perfect=%u readhits=%u\n",
216 profile_p->writecache_init_writes,
217 profile_p->writecache_abutted_writes,
218 profile_p->writecache_total_writes,
219 profile_p->writecache_non_oplock_writes,
220 profile_p->writecache_allocated_write_caches,
221 profile_p->writecache_num_write_caches,
222 profile_p->writecache_direct_writes,
223 profile_p->writecache_num_perfect_writes,
224 profile_p->writecache_read_hits ));
226 DEBUG(3,("WRITECACHE: Flushes SEEK=%d, READ=%d, WRITE=%d, READRAW=%d, OPLOCK=%d, CLOSE=%d, SYNC=%d\n",
227 profile_p->writecache_flushed_writes[SEEK_FLUSH],
228 profile_p->writecache_flushed_writes[READ_FLUSH],
229 profile_p->writecache_flushed_writes[WRITE_FLUSH],
230 profile_p->writecache_flushed_writes[READRAW_FLUSH],
231 profile_p->writecache_flushed_writes[OPLOCK_RELEASE_FLUSH],
232 profile_p->writecache_flushed_writes[CLOSE_FLUSH],
233 profile_p->writecache_flushed_writes[SYNC_FLUSH] ));
238 DO_PROFILE_INC(writecache_direct_writes);
239 total_written = real_write_file(fsp, data, pos, n);
240 if ((total_written != -1) && (pos + total_written > fsp->size))
241 fsp->size = pos + total_written;
242 return total_written;
245 DEBUG(9,("write_file (%s)(fd=%d pos=%.0f size=%u) wcp->offset=%.0f wcp->data_size=%u\n",
246 fsp->fsp_name, fsp->fd, (double)pos, (unsigned int)n, (double)wcp->offset, (unsigned int)wcp->data_size));
249 * If we have active cache and it isn't contiguous then we flush.
250 * NOTE: There is a small problem with running out of disk ....
253 if (wcp->data_size) {
255 BOOL cache_flush_needed = False;
257 if ((pos >= wcp->offset) && (pos <= wcp->offset + wcp->data_size)) {
260 * Start of write overlaps or abutts the existing data.
263 size_t data_used = MIN((wcp->alloc_size - (pos - wcp->offset)), n);
265 memcpy(wcp->data + (pos - wcp->offset), data, data_used);
268 * Update the current buffer size with the new data.
271 if(pos + data_used > wcp->offset + wcp->data_size)
272 wcp->data_size = pos + data_used - wcp->offset;
275 * Update the file size if changed.
278 if (wcp->offset + wcp->data_size > wcp->file_size)
279 fsp->size = wcp->file_size = wcp->offset + wcp->data_size;
282 * If we used all the data then
289 cache_flush_needed = True;
292 * Move the start of data forward by the amount used,
293 * cut down the amount left by the same amount.
300 DO_PROFILE_INC(writecache_abutted_writes);
301 total_written = data_used;
305 } else if ((pos < wcp->offset) && (pos + n > wcp->offset) &&
306 (pos + n <= wcp->offset + wcp->alloc_size)) {
309 * End of write overlaps the existing data.
312 size_t data_used = pos + n - wcp->offset;
314 memcpy(wcp->data, data + n - data_used, data_used);
317 * Update the current buffer size with the new data.
320 if(pos + n > wcp->offset + wcp->data_size)
321 wcp->data_size = pos + n - wcp->offset;
324 * Update the file size if changed.
327 if (wcp->offset + wcp->data_size > wcp->file_size)
328 fsp->size = wcp->file_size = wcp->offset + wcp->data_size;
331 * We don't need to move the start of data, but we
332 * cut down the amount left by the amount used.
338 * We cannot have used all the data here.
341 cache_flush_needed = True;
343 DO_PROFILE_INC(writecache_abutted_writes);
344 total_written = data_used;
348 } else if ( (pos >= wcp->file_size) &&
349 (wcp->offset + wcp->data_size == wcp->file_size) &&
350 (pos > wcp->offset + wcp->data_size) &&
351 (pos < wcp->offset + wcp->alloc_size) ) {
354 * Non-contiguous write part of which fits within
355 * the cache buffer and is extending the file
356 * and the cache contents reflect the current
357 * data up to the current end of the file.
362 if(pos + n <= wcp->offset + wcp->alloc_size)
365 data_used = wcp->offset + wcp->alloc_size - pos;
368 * Fill in the non-continuous area with zeros.
371 memset(wcp->data + wcp->data_size, '\0',
372 pos - (wcp->offset + wcp->data_size) );
374 memcpy(wcp->data + (pos - wcp->offset), data, data_used);
377 * Update the current buffer size with the new data.
380 if(pos + data_used > wcp->offset + wcp->data_size)
381 wcp->data_size = pos + data_used - wcp->offset;
384 * Update the file size if changed.
387 if (wcp->offset + wcp->data_size > wcp->file_size)
388 fsp->size = wcp->file_size = wcp->offset + wcp->data_size;
391 * If we used all the data then
398 cache_flush_needed = True;
401 * Move the start of data forward by the amount used,
402 * cut down the amount left by the same amount.
409 DO_PROFILE_INC(writecache_abutted_writes);
410 total_written = data_used;
417 * Write is bigger than buffer, or there is no overlap on the
421 DEBUG(9,("write_file: non cacheable write : fd = %d, pos = %.0f, len = %u, current cache pos = %.0f \
422 len = %u\n",fsp->fd, (double)pos, (unsigned int)n, (double)wcp->offset, (unsigned int)wcp->data_size ));
425 * Update the file size if needed.
428 if(pos + n > wcp->file_size)
429 fsp->size = wcp->file_size = pos + n;
432 * If write would fit in the cache, and is larger than
433 * the data already in the cache, flush the cache and
434 * preferentially copy the data new data into it. Otherwise
435 * just write the data directly.
438 if ( n <= wcp->alloc_size && n > wcp->data_size) {
439 cache_flush_needed = True;
441 ssize_t ret = real_write_file(fsp, data, pos, n);
443 DO_PROFILE_INC(writecache_direct_writes);
447 if (pos + ret > wcp->file_size)
448 fsp->size = wcp->file_size = pos + ret;
457 if(wcp->data_size > wcp->file_size)
458 fsp->size = wcp->file_size = wcp->data_size;
460 if (cache_flush_needed) {
461 DEBUG(3,("WRITE_FLUSH:%d: due to noncontinuous write: fd = %d, size = %.0f, pos = %.0f, \
462 n = %u, wcp->offset=%.0f, wcp->data_size=%u\n",
463 write_path, fsp->fd, (double)wcp->file_size, (double)pos, (unsigned int)n,
464 (double)wcp->offset, (unsigned int)wcp->data_size ));
466 flush_write_cache(fsp, WRITE_FLUSH);
471 * If the write request is bigger than the cache
472 * size, write it all out.
475 if (n > wcp->alloc_size ) {
476 ssize_t ret = real_write_file(fsp, data, pos, n);
480 if (pos + ret > wcp->file_size)
481 fsp->size = wcp->file_size = pos + n;
483 DO_PROFILE_INC(writecache_direct_writes);
484 return total_written + n;
488 * If there's any data left, cache it.
493 if (wcp->data_size) {
494 DO_PROFILE_INC(writecache_abutted_writes);
496 DO_PROFILE_INC(writecache_init_writes);
499 memcpy(wcp->data+wcp->data_size, data, n);
500 if (wcp->data_size == 0) {
502 DO_PROFILE_INC(writecache_num_write_caches);
507 * Update the file size if changed.
510 if (wcp->offset + wcp->data_size > wcp->file_size)
511 fsp->size = wcp->file_size = wcp->offset + wcp->data_size;
512 DEBUG(9,("wcp->offset = %.0f wcp->data_size = %u cache return %u\n",
513 (double)wcp->offset, (unsigned int)wcp->data_size, (unsigned int)n));
516 return total_written; /* .... that's a write :) */
519 return total_written;
522 /****************************************************************************
523 Delete the write cache structure.
524 ****************************************************************************/
526 void delete_write_cache(files_struct *fsp)
533 if(!(wcp = fsp->wcp))
536 DO_PROFILE_DEC(writecache_allocated_write_caches);
537 allocated_write_caches--;
539 SMB_ASSERT(wcp->data_size == 0);
541 SAFE_FREE(wcp->data);
544 DEBUG(10,("delete_write_cache: File %s deleted write cache\n", fsp->fsp_name ));
547 /****************************************************************************
548 Setup the write cache structure.
549 ****************************************************************************/
551 static BOOL setup_write_cache(files_struct *fsp, SMB_OFF_T file_size)
553 ssize_t alloc_size = lp_write_cache_size(SNUM(fsp->conn));
556 if (allocated_write_caches >= MAX_WRITE_CACHES)
559 if(alloc_size == 0 || fsp->wcp)
562 if((wcp = (write_cache *)malloc(sizeof(write_cache))) == NULL) {
563 DEBUG(0,("setup_write_cache: malloc fail.\n"));
567 wcp->file_size = file_size;
569 wcp->alloc_size = alloc_size;
571 if((wcp->data = malloc(wcp->alloc_size)) == NULL) {
572 DEBUG(0,("setup_write_cache: malloc fail for buffer size %u.\n",
573 (unsigned int)wcp->alloc_size ));
578 memset(wcp->data, '\0', wcp->alloc_size );
581 DO_PROFILE_INC(writecache_allocated_write_caches);
582 allocated_write_caches++;
584 DEBUG(10,("setup_write_cache: File %s allocated write cache size %u\n",
585 fsp->fsp_name, wcp->alloc_size ));
590 /****************************************************************************
591 Cope with a size change.
592 ****************************************************************************/
594 void set_filelen_write_cache(files_struct *fsp, SMB_OFF_T file_size)
596 fsp->size = file_size;
598 /* The cache *must* have been flushed before we do this. */
599 if (fsp->wcp->data_size != 0) {
601 slprintf(msg, sizeof(msg)-1, "set_filelen_write_cache: size change \
602 on file %s with write cache size = %u\n", fsp->fsp_name, fsp->wcp->data_size );
605 fsp->wcp->file_size = file_size;
609 /*******************************************************************
610 Flush a write cache struct to disk.
611 ********************************************************************/
613 ssize_t flush_write_cache(files_struct *fsp, enum flush_reason_enum reason)
615 write_cache *wcp = fsp->wcp;
619 if(!wcp || !wcp->data_size)
622 data_size = wcp->data_size;
625 DO_PROFILE_DEC_INC(writecache_num_write_caches,writecache_flushed_writes[reason]);
627 DEBUG(9,("flushing write cache: fd = %d, off=%.0f, size=%u\n",
628 fsp->fd, (double)wcp->offset, (unsigned int)data_size));
631 if(data_size == wcp->alloc_size)
632 DO_PROFILE_INC(writecache_num_perfect_writes);
635 ret = real_write_file(fsp, wcp->data, wcp->offset, data_size);
638 * Ensure file size if kept up to date if write extends file.
641 if ((ret != -1) && (wcp->offset + ret > wcp->file_size))
642 wcp->file_size = wcp->offset + ret;
647 /*******************************************************************
649 ********************************************************************/
651 void sync_file(connection_struct *conn, files_struct *fsp)
653 if(lp_strict_sync(SNUM(conn)) && fsp->fd != -1) {
654 flush_write_cache(fsp, SYNC_FLUSH);
655 conn->vfs_ops.fsync(fsp,fsp->fd);
660 /************************************************************
661 Perform a stat whether a valid fd or not.
662 ************************************************************/
664 int fsp_stat(files_struct *fsp, SMB_STRUCT_STAT *pst)
667 return vfs_stat(fsp->conn, fsp->fsp_name, pst);
669 return vfs_fstat(fsp,fsp->fd, pst);