selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 # NOTE: Refer to the README for more details about the various testenvs,
   7 # and tips about adding new testenvs.
   8
   9 package Samba3;
  10
  11 use strict;
  12 use Cwd qw(abs_path);
  13 use FindBin qw($RealBin);
  14 use POSIX;
  15 use target::Samba;
  16 use File::Path 'remove_tree';
  17
  18 sub have_ads($) {
  19         my ($self) = @_;
  20         my $found_ads = 0;
  21         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  22         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  23
  24         while (<IN>) {
  25                 if (/WITH_ADS/) {
  26                        $found_ads = 1;
  27                 }
  28         }
  29         close IN;
  30
  31         # If we were not built with ADS support, pretend we were never even available
  32         print "smbd does not have ADS support\n" unless $found_ads;
  33         return $found_ads;
  34 }
  35
  36 # return smb.conf parameters applicable to @path, based on the underlying
  37 # filesystem type
  38 sub get_fs_specific_conf($$)
  39 {
  40         my ($self, $path) = @_;
  41         my $mods = "";
  42         my $stat_out = `stat --file-system $path` or return "";
  43
  44         if ($stat_out =~ m/Type:\s+btrfs/) {
  45                 $mods .= "streams_xattr btrfs";
  46         }
  47
  48         if ($mods) {
  49                 return "vfs objects = $mods";
  50         }
  51
  52         return undef;
  53 }
  54
  55 sub new($$) {
  56         my ($classname, $bindir, $srcdir, $server_maxtime) = @_;
  57         my $self = { vars => {},
  58                      bindir => $bindir,
  59                      srcdir => $srcdir,
  60                      server_maxtime => $server_maxtime
  61         };
  62         bless $self;
  63         return $self;
  64 }
  65
  66 sub teardown_env($$)
  67 {
  68         my ($self, $envvars) = @_;
  69         my $count = 0;
  70
  71         # This should cause smbd to terminate gracefully
  72         close($envvars->{STDIN_PIPE});
  73
  74         my $smbdpid = $envvars->{SMBD_TL_PID};
  75         my $nmbdpid = $envvars->{NMBD_TL_PID};
  76         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  77
  78         # This should give it time to write out the gcov data
  79         until ($count > 20) {
  80             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  81             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  82             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  83             if ($smbdchild == -1
  84                 && $nmbdchild == -1
  85                 && $winbinddchild == -1) {
  86                 last;
  87             }
  88             sleep(1);
  89             $count++;
  90         }
  91
  92         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  93             return;
  94         }
  95
  96         $self->stop_sig_term($smbdpid);
  97         $self->stop_sig_term($nmbdpid);
  98         $self->stop_sig_term($winbinddpid);
  99
 100         $count = 0;
 101         until ($count > 10) {
 102             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 103             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 104             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 105             if ($smbdchild == -1
 106                 && $nmbdchild == -1
 107                 && $winbinddchild == -1) {
 108                 last;
 109             }
 110             sleep(1);
 111             $count++;
 112         }
 113
 114         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 115             return;
 116         }
 117
 118         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 119         $self->stop_sig_kill($smbdpid);
 120         $self->stop_sig_kill($nmbdpid);
 121         $self->stop_sig_kill($winbinddpid);
 122
 123         return 0;
 124 }
 125
 126 sub getlog_env_app($$$)
 127 {
 128         my ($self, $envvars, $name) = @_;
 129
 130         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 131         my $out = $title;
 132
 133         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 134
 135         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 136         while (<LOG>) {
 137                 $out .= $_;
 138         }
 139         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 140         close(LOG);
 141
 142         return "" if $out eq $title;
 143
 144         return $out;
 145 }
 146
 147 sub getlog_env($$)
 148 {
 149         my ($self, $envvars) = @_;
 150         my $ret = "";
 151
 152         $ret .= $self->getlog_env_app($envvars, "SMBD");
 153         $ret .= $self->getlog_env_app($envvars, "NMBD");
 154         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 155
 156         return $ret;
 157 }
 158
 159 sub check_env($$)
 160 {
 161         my ($self, $envvars) = @_;
 162
 163         my $childpid = waitpid(-1, WNOHANG);
 164
 165         # TODO ...
 166         return 1;
 167 }
 168
 169 # Declare the environments Samba3 makes available.
 170 # To be set up, they will be called as
 171 #   samba3->setup_$envname($self, $path, $dep_1_vars, $dep_2_vars, ...)
 172 %Samba3::ENV_DEPS = (
 173         # name              => [dep_1, dep_2, ...],
 174         nt4_dc              => [],
 175         nt4_dc_schannel     => [],
 176
 177         simpleserver        => [],
 178         fileserver          => [],
 179         maptoguest          => [],
 180         ktest               => [],
 181
 182         nt4_member          => ["nt4_dc"],
 183
 184         ad_member           => ["ad_dc"],
 185         ad_member_rfc2307   => ["ad_dc_ntvfs"],
 186         ad_member_idmap_rid => ["ad_dc"],
 187         ad_member_idmap_ad  => ["fl2008r2dc"],
 188 );
 189
 190 %Samba3::ENV_DEPS_POST = ();
 191
 192 sub setup_nt4_dc
 193 {
 194         my ($self, $path) = @_;
 195
 196         print "PROVISIONING NT4 DC...";
 197
 198         my $nt4_dc_options = "
 199         domain master = yes
 200         domain logons = yes
 201         lanman auth = yes
 202         ntlm auth = yes
 203         raw NTLMv2 auth = yes
 204         server schannel = auto
 205
 206         rpc_server:epmapper = external
 207         rpc_server:spoolss = external
 208         rpc_server:lsarpc = external
 209         rpc_server:samr = external
 210         rpc_server:netlogon = external
 211         rpc_server:register_embedded_np = yes
 212         rpc_server:FssagentRpc = external
 213
 214         rpc_daemon:epmd = fork
 215         rpc_daemon:spoolssd = fork
 216         rpc_daemon:lsasd = fork
 217         rpc_daemon:fssd = fork
 218         fss: sequence timeout = 1
 219         check parent directory delete on close = yes
 220 ";
 221
 222         my $vars = $self->provision($path, "SAMBA-TEST",
 223                                     "LOCALNT4DC2",
 224                                     "localntdc2pass",
 225                                     $nt4_dc_options);
 226
 227         $vars or return undef;
 228
 229         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 230                return undef;
 231         }
 232
 233         $vars->{DOMSID} = $vars->{SAMSID};
 234         $vars->{DC_SERVER} = $vars->{SERVER};
 235         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 236         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 237         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 238         $vars->{DC_USERNAME} = $vars->{USERNAME};
 239         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 240
 241         return $vars;
 242 }
 243
 244 sub setup_nt4_dc_schannel
 245 {
 246         my ($self, $path) = @_;
 247
 248         print "PROVISIONING NT4 DC WITH SERVER SCHANNEL ...";
 249
 250         my $pdc_options = "
 251         domain master = yes
 252         domain logons = yes
 253         lanman auth = yes
 254
 255         rpc_server:epmapper = external
 256         rpc_server:spoolss = external
 257         rpc_server:lsarpc = external
 258         rpc_server:samr = external
 259         rpc_server:netlogon = external
 260         rpc_server:register_embedded_np = yes
 261
 262         rpc_daemon:epmd = fork
 263         rpc_daemon:spoolssd = fork
 264         rpc_daemon:lsasd = fork
 265
 266         server schannel = yes
 267         # used to reproduce bug #12772
 268         server max protocol = SMB2_02
 269 ";
 270
 271         my $vars = $self->provision($path, "NT4SCHANNEL",
 272                                     "LOCALNT4DC9",
 273                                     "localntdc9pass",
 274                                     $pdc_options);
 275
 276         $vars or return undef;
 277
 278         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 279                return undef;
 280         }
 281
 282         $vars->{DOMSID} = $vars->{SAMSID};
 283         $vars->{DC_SERVER} = $vars->{SERVER};
 284         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 285         $vars->{DC_SERVER_IPV6} = $vars->{SERVER_IPV6};
 286         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 287         $vars->{DC_USERNAME} = $vars->{USERNAME};
 288         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 289
 290         return $vars;
 291 }
 292
 293 sub setup_nt4_member
 294 {
 295         my ($self, $prefix, $nt4_dc_vars) = @_;
 296         my $count = 0;
 297         my $rc;
 298
 299         print "PROVISIONING MEMBER...";
 300
 301         my $require_mutexes = "dbwrap_tdb_require_mutexes:* = yes";
 302         $require_mutexes = "" if ($ENV{SELFTEST_DONT_REQUIRE_TDB_MUTEX_SUPPORT} eq "1");
 303
 304         my $member_options = "
 305         security = domain
 306         dbwrap_tdb_mutexes:* = yes
 307         ${require_mutexes}
 308 ";
 309         my $ret = $self->provision($prefix, $nt4_dc_vars->{DOMAIN},
 310                                    "LOCALNT4MEMBER3",
 311                                    "localnt4member3pass",
 312                                    $member_options);
 313
 314         $ret or return undef;
 315
 316         my $nmblookup = Samba::bindir_path($self, "nmblookup");
 317         do {
 318                 print "Waiting for the LOGON SERVER registration ...\n";
 319                 $rc = system("$nmblookup $ret->{CONFIGURATION} $ret->{DOMAIN}\#1c");
 320                 if ($rc != 0) {
 321                         sleep(1);
 322                 }
 323                 $count++;
 324         } while ($rc != 0 && $count < 10);
 325         if ($count == 10) {
 326                 print "NMBD not reachable after 10 retries\n";
 327                 teardown_env($self, $ret);
 328                 return 0;
 329         }
 330
 331         my $net = Samba::bindir_path($self, "net");
 332         # Add hosts file for name lookups
 333         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 334         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 335         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 336         $cmd .= "$net rpc join $ret->{CONFIGURATION} $nt4_dc_vars->{DOMAIN} member";
 337         $cmd .= " -U$nt4_dc_vars->{USERNAME}\%$nt4_dc_vars->{PASSWORD}";
 338
 339         if (system($cmd) != 0) {
 340             warn("Join failed\n$cmd");
 341             return undef;
 342         }
 343
 344         # Add hosts file for name lookups
 345         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 346         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 347         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 348         $cmd .= "$net $ret->{CONFIGURATION} primarytrust dumpinfo | grep -q 'REDACTED SECRET VALUES'";
 349
 350         if (system($cmd) != 0) {
 351             warn("check failed\n$cmd");
 352             return undef;
 353         }
 354
 355         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 356                return undef;
 357         }
 358
 359         $ret->{DOMSID} = $nt4_dc_vars->{DOMSID};
 360         $ret->{DC_SERVER} = $nt4_dc_vars->{SERVER};
 361         $ret->{DC_SERVER_IP} = $nt4_dc_vars->{SERVER_IP};
 362         $ret->{DC_SERVER_IPV6} = $nt4_dc_vars->{SERVER_IPV6};
 363         $ret->{DC_NETBIOSNAME} = $nt4_dc_vars->{NETBIOSNAME};
 364         $ret->{DC_USERNAME} = $nt4_dc_vars->{USERNAME};
 365         $ret->{DC_PASSWORD} = $nt4_dc_vars->{PASSWORD};
 366
 367         return $ret;
 368 }
 369
 370 sub setup_ad_member
 371 {
 372         my ($self, $prefix, $dcvars) = @_;
 373
 374         my $prefix_abs = abs_path($prefix);
 375         my @dirs = ();
 376
 377         # If we didn't build with ADS, pretend this env was never available
 378         if (not $self->have_ads()) {
 379                 return "UNKNOWN";
 380         }
 381
 382         print "PROVISIONING S3 AD MEMBER...";
 383
 384         mkdir($prefix_abs, 0777);
 385
 386         my $share_dir="$prefix_abs/share";
 387         push(@dirs, $share_dir);
 388
 389         my $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}";
 390         push(@dirs, $substitution_path);
 391
 392         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice";
 393         push(@dirs, $substitution_path);
 394
 395         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/U_alice/G_domain users";
 396         push(@dirs, $substitution_path);
 397
 398         # Using '/' as the winbind separator is a bad idea ...
 399         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}";
 400         push(@dirs, $substitution_path);
 401
 402         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice";
 403         push(@dirs, $substitution_path);
 404
 405         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}";
 406         push(@dirs, $substitution_path);
 407
 408         $substitution_path = "$share_dir/D_$dcvars->{DOMAIN}/u_$dcvars->{DOMAIN}/alice/g_$dcvars->{DOMAIN}/domain users";
 409         push(@dirs, $substitution_path);
 410
 411         my $member_options = "
 412         security = ads
 413         workgroup = $dcvars->{DOMAIN}
 414         realm = $dcvars->{REALM}
 415         netbios aliases = foo bar
 416         template homedir = /home/%D/%G/%U
 417         auth event notification = true
 418         password server = $dcvars->{SERVER}
 419
 420 [sub_dug]
 421         path = $share_dir/D_%D/U_%U/G_%G
 422         writeable = yes
 423
 424 [sub_dug2]
 425         path = $share_dir/D_%D/u_%u/g_%g
 426         writeable = yes
 427
 428 ";
 429
 430         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 431                                    "LOCALADMEMBER",
 432                                    "loCalMemberPass",
 433                                    $member_options,
 434                                    $dcvars->{SERVER_IP},
 435                                    $dcvars->{SERVER_IPV6});
 436
 437         $ret or return undef;
 438
 439         mkdir($_, 0777) foreach(@dirs);
 440
 441         close(USERMAP);
 442         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 443         $ret->{REALM} = $dcvars->{REALM};
 444         $ret->{DOMSID} = $dcvars->{DOMSID};
 445
 446         my $ctx;
 447         $ctx = {};
 448         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 449         $ctx->{domain} = $dcvars->{DOMAIN};
 450         $ctx->{realm} = $dcvars->{REALM};
 451         $ctx->{dnsname} = lc($dcvars->{REALM});
 452         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 453         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 454         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 455         Samba::mk_krb5_conf($ctx, "");
 456
 457         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 458         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 459
 460         my $net = Samba::bindir_path($self, "net");
 461         # Add hosts file for name lookups
 462         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 463         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 464         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 465                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 466         } else {
 467                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 468         }
 469         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 470         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 471         $cmd .= "$net join $ret->{CONFIGURATION}";
 472         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 473
 474         if (system($cmd) != 0) {
 475             warn("Join failed\n$cmd");
 476             return undef;
 477         }
 478
 479         # We need world access to this share, as otherwise the domain
 480         # administrator from the AD domain provided by Samba4 can't
 481         # access the share for tests.
 482         chmod 0777, "$prefix/share";
 483
 484         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 485                 return undef;
 486         }
 487
 488         $ret->{DC_SERVER} = $dcvars->{SERVER};
 489         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 490         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 491         $ret->{DC_SERVERCONFFILE} = $dcvars->{SERVERCONFFILE};
 492         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 493         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 494         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 495
 496         return $ret;
 497 }
 498
 499 sub setup_ad_member_rfc2307
 500 {
 501         my ($self, $prefix, $dcvars) = @_;
 502
 503         # If we didn't build with ADS, pretend this env was never available
 504         if (not $self->have_ads()) {
 505                 return "UNKNOWN";
 506         }
 507
 508         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 509
 510         my $member_options = "
 511         security = ads
 512         workgroup = $dcvars->{DOMAIN}
 513         realm = $dcvars->{REALM}
 514         idmap cache time = 0
 515         idmap negative cache time = 0
 516         idmap config * : backend = autorid
 517         idmap config * : range = 1000000-1999999
 518         idmap config * : rangesize = 100000
 519         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 520         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 521         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 522         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 523         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 524
 525         password server = $dcvars->{SERVER}
 526 ";
 527
 528         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 529                                    "RFC2307MEMBER",
 530                                    "loCalMemberPass",
 531                                    $member_options,
 532                                    $dcvars->{SERVER_IP},
 533                                    $dcvars->{SERVER_IPV6});
 534
 535         $ret or return undef;
 536
 537         close(USERMAP);
 538         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 539         $ret->{REALM} = $dcvars->{REALM};
 540         $ret->{DOMSID} = $dcvars->{DOMSID};
 541
 542         my $ctx;
 543         my $prefix_abs = abs_path($prefix);
 544         $ctx = {};
 545         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 546         $ctx->{domain} = $dcvars->{DOMAIN};
 547         $ctx->{realm} = $dcvars->{REALM};
 548         $ctx->{dnsname} = lc($dcvars->{REALM});
 549         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 550         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 551         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 552         Samba::mk_krb5_conf($ctx, "");
 553
 554         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 555         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 556
 557         my $net = Samba::bindir_path($self, "net");
 558         # Add hosts file for name lookups
 559         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 560         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 561         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 562                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 563         } else {
 564                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 565         }
 566         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 567         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 568         $cmd .= "$net join $ret->{CONFIGURATION}";
 569         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 570
 571         if (system($cmd) != 0) {
 572             warn("Join failed\n$cmd");
 573             return undef;
 574         }
 575
 576         # We need world access to this share, as otherwise the domain
 577         # administrator from the AD domain provided by Samba4 can't
 578         # access the share for tests.
 579         chmod 0777, "$prefix/share";
 580
 581         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 582                 return undef;
 583         }
 584
 585         $ret->{DC_SERVER} = $dcvars->{SERVER};
 586         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 587         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 588         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 589         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 590         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 591
 592         return $ret;
 593 }
 594
 595 sub setup_ad_member_idmap_rid
 596 {
 597         my ($self, $prefix, $dcvars) = @_;
 598
 599         # If we didn't build with ADS, pretend this env was never available
 600         if (not $self->have_ads()) {
 601                 return "UNKNOWN";
 602         }
 603
 604         print "PROVISIONING S3 AD MEMBER WITH idmap_rid config...";
 605
 606         my $member_options = "
 607         security = ads
 608         workgroup = $dcvars->{DOMAIN}
 609         realm = $dcvars->{REALM}
 610         idmap config * : backend = tdb
 611         idmap config * : range = 1000000-1999999
 612         idmap config $dcvars->{DOMAIN} : backend = rid
 613         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 614         # Prevent overridding the provisioned lib/krb5.conf which sets certain
 615         # values required for tests to succeed
 616         create krb5 conf = no
 617 ";
 618
 619         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 620                                    "IDMAPRIDMEMBER",
 621                                    "loCalMemberPass",
 622                                    $member_options,
 623                                    $dcvars->{SERVER_IP},
 624                                    $dcvars->{SERVER_IPV6});
 625
 626         $ret or return undef;
 627
 628         close(USERMAP);
 629         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 630         $ret->{REALM} = $dcvars->{REALM};
 631         $ret->{DOMSID} = $dcvars->{DOMSID};
 632
 633         my $ctx;
 634         my $prefix_abs = abs_path($prefix);
 635         $ctx = {};
 636         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 637         $ctx->{domain} = $dcvars->{DOMAIN};
 638         $ctx->{realm} = $dcvars->{REALM};
 639         $ctx->{dnsname} = lc($dcvars->{REALM});
 640         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 641         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 642         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 643         Samba::mk_krb5_conf($ctx, "");
 644
 645         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 646         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 647
 648         my $net = Samba::bindir_path($self, "net");
 649         # Add hosts file for name lookups
 650         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 651         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 652         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 653                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 654         } else {
 655                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 656         }
 657         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 658         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 659         $cmd .= "$net join $ret->{CONFIGURATION}";
 660         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 661
 662         if (system($cmd) != 0) {
 663             warn("Join failed\n$cmd");
 664             return undef;
 665         }
 666
 667         # We need world access to this share, as otherwise the domain
 668         # administrator from the AD domain provided by Samba4 can't
 669         # access the share for tests.
 670         chmod 0777, "$prefix/share";
 671
 672         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 673                 return undef;
 674         }
 675
 676         $ret->{DC_SERVER} = $dcvars->{SERVER};
 677         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 678         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 679         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 680         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 681         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 682
 683         return $ret;
 684 }
 685
 686 sub setup_ad_member_idmap_ad
 687 {
 688         my ($self, $prefix, $dcvars) = @_;
 689
 690         # If we didn't build with ADS, pretend this env was never available
 691         if (not $self->have_ads()) {
 692                 return "UNKNOWN";
 693         }
 694
 695         print "PROVISIONING S3 AD MEMBER WITH idmap_ad config...";
 696
 697         my $member_options = "
 698         security = ads
 699         workgroup = $dcvars->{DOMAIN}
 700         realm = $dcvars->{REALM}
 701         password server = $dcvars->{SERVER}
 702         idmap config * : backend = tdb
 703         idmap config * : range = 1000000-1999999
 704         idmap config $dcvars->{DOMAIN} : backend = ad
 705         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 706         idmap config $dcvars->{TRUST_DOMAIN} : backend = ad
 707         idmap config $dcvars->{TRUST_DOMAIN} : range = 2000000-2999999
 708 ";
 709
 710         my $ret = $self->provision($prefix, $dcvars->{DOMAIN},
 711                                    "IDMAPADMEMBER",
 712                                    "loCalMemberPass",
 713                                    $member_options,
 714                                    $dcvars->{SERVER_IP},
 715                                    $dcvars->{SERVER_IPV6});
 716
 717         $ret or return undef;
 718
 719         close(USERMAP);
 720         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 721         $ret->{REALM} = $dcvars->{REALM};
 722         $ret->{DOMSID} = $dcvars->{DOMSID};
 723
 724         my $ctx;
 725         my $prefix_abs = abs_path($prefix);
 726         $ctx = {};
 727         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 728         $ctx->{domain} = $dcvars->{DOMAIN};
 729         $ctx->{realm} = $dcvars->{REALM};
 730         $ctx->{dnsname} = lc($dcvars->{REALM});
 731         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 732         $ctx->{kdc_ipv6} = $dcvars->{SERVER_IPV6};
 733         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
 734         Samba::mk_krb5_conf($ctx, "");
 735
 736         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 737         $ret->{RESOLV_CONF} = $dcvars->{RESOLV_CONF};
 738
 739         my $net = Samba::bindir_path($self, "net");
 740         # Add hosts file for name lookups
 741         my $cmd = "NSS_WRAPPER_HOSTS='$ret->{NSS_WRAPPER_HOSTS}' ";
 742         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 743         if (defined($ret->{RESOLV_WRAPPER_CONF})) {
 744                 $cmd .= "RESOLV_WRAPPER_CONF=\"$ret->{RESOLV_WRAPPER_CONF}\" ";
 745         } else {
 746                 $cmd .= "RESOLV_WRAPPER_HOSTS=\"$ret->{RESOLV_WRAPPER_HOSTS}\" ";
 747         }
 748         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 749         $cmd .= "SELFTEST_WINBINDD_SOCKET_DIR=\"$ret->{SELFTEST_WINBINDD_SOCKET_DIR}\" ";
 750         $cmd .= "$net join $ret->{CONFIGURATION}";
 751         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 752
 753         if (system($cmd) != 0) {
 754             warn("Join failed\n$cmd");
 755             return undef;
 756         }
 757
 758         # We need world access to this share, as otherwise the domain
 759         # administrator from the AD domain provided by Samba4 can't
 760         # access the share for tests.
 761         chmod 0777, "$prefix/share";
 762
 763         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 764                 return undef;
 765         }
 766
 767         $ret->{DC_SERVER} = $dcvars->{SERVER};
 768         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 769         $ret->{DC_SERVER_IPV6} = $dcvars->{SERVER_IPV6};
 770         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 771         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 772         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 773
 774         $ret->{TRUST_SERVER} = $dcvars->{TRUST_SERVER};
 775         $ret->{TRUST_USERNAME} = $dcvars->{TRUST_USERNAME};
 776         $ret->{TRUST_PASSWORD} = $dcvars->{TRUST_PASSWORD};
 777         $ret->{TRUST_DOMAIN} = $dcvars->{TRUST_DOMAIN};
 778         $ret->{TRUST_REALM} = $dcvars->{TRUST_REALM};
 779         $ret->{TRUST_DOMSID} = $dcvars->{TRUST_DOMSID};
 780
 781         return $ret;
 782 }
 783
 784 sub setup_simpleserver
 785 {
 786         my ($self, $path) = @_;
 787
 788         print "PROVISIONING simple server...";
 789
 790         my $prefix_abs = abs_path($path);
 791
 792         my $simpleserver_options = "
 793         lanman auth = yes
 794         ntlm auth = yes
 795         vfs objects = xattr_tdb streams_depot
 796         change notify = no
 797         smb encrypt = off
 798
 799 [vfs_aio_pthread]
 800         path = $prefix_abs/share
 801         read only = no
 802         vfs objects = aio_pthread
 803         aio_pthread:aio open = yes
 804         smbd:async dosmode = no
 805
 806 [vfs_aio_pthread_async_dosmode_default1]
 807         path = $prefix_abs/share
 808         read only = no
 809         vfs objects = aio_pthread
 810         store dos attributes = yes
 811         aio_pthread:aio open = yes
 812         smbd:async dosmode = yes
 813
 814 [vfs_aio_pthread_async_dosmode_default2]
 815         path = $prefix_abs/share
 816         read only = no
 817         vfs objects = aio_pthread xattr_tdb
 818         store dos attributes = yes
 819         aio_pthread:aio open = yes
 820         smbd:async dosmode = yes
 821
 822 [vfs_aio_pthread_async_dosmode_force_sync1]
 823         path = $prefix_abs/share
 824         read only = no
 825         vfs objects = aio_pthread
 826         store dos attributes = yes
 827         aio_pthread:aio open = yes
 828         smbd:async dosmode = yes
 829         # This simulates non linux systems
 830         smbd:force sync user path safe threadpool = yes
 831         smbd:force sync user chdir safe threadpool = yes
 832         smbd:force sync root path safe threadpool = yes
 833         smbd:force sync root chdir safe threadpool = yes
 834
 835 [vfs_aio_pthread_async_dosmode_force_sync2]
 836         path = $prefix_abs/share
 837         read only = no
 838         vfs objects = aio_pthread xattr_tdb
 839         store dos attributes = yes
 840         aio_pthread:aio open = yes
 841         smbd:async dosmode = yes
 842         # This simulates non linux systems
 843         smbd:force sync user path safe threadpool = yes
 844         smbd:force sync user chdir safe threadpool = yes
 845         smbd:force sync root path safe threadpool = yes
 846         smbd:force sync root chdir safe threadpool = yes
 847
 848 [vfs_aio_fork]
 849         path = $prefix_abs/share
 850         vfs objects = aio_fork
 851         read only = no
 852         vfs_aio_fork:erratic_testing_mode=yes
 853
 854 [dosmode]
 855         path = $prefix_abs/share
 856         vfs objects =
 857         store dos attributes = yes
 858         hide files = /hidefile/
 859         hide dot files = yes
 860
 861 [enc_desired]
 862         path = $prefix_abs/share
 863         vfs objects =
 864         smb encrypt = desired
 865
 866 [hidenewfiles]
 867         path = $prefix_abs/share
 868         hide new files timeout = 5
 869 ";
 870
 871         my $vars = $self->provision($path, "WORKGROUP",
 872                                     "LOCALSHARE4",
 873                                     "local4pass",
 874                                     $simpleserver_options);
 875
 876         $vars or return undef;
 877
 878         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 879                return undef;
 880         }
 881
 882         return $vars;
 883 }
 884
 885 sub setup_fileserver
 886 {
 887         my ($self, $path) = @_;
 888         my $prefix_abs = abs_path($path);
 889         my $srcdir_abs = abs_path($self->{srcdir});
 890
 891         print "PROVISIONING file server ...\n";
 892
 893         my @dirs = ();
 894
 895         mkdir($prefix_abs, 0777);
 896
 897         my $usershare_dir="$prefix_abs/lib/usershare";
 898
 899         mkdir("$prefix_abs/lib", 0755);
 900         remove_tree($usershare_dir);
 901         mkdir($usershare_dir, 01770);
 902
 903         my $share_dir="$prefix_abs/share";
 904
 905         # Create share directory structure
 906         my $lower_case_share_dir="$share_dir/lower-case";
 907         push(@dirs, $lower_case_share_dir);
 908
 909         my $lower_case_share_dir_30000="$share_dir/lower-case-30000";
 910         push(@dirs, $lower_case_share_dir_30000);
 911
 912         my $dfree_share_dir="$share_dir/dfree";
 913         push(@dirs, $dfree_share_dir);
 914         push(@dirs, "$dfree_share_dir/subdir1");
 915         push(@dirs, "$dfree_share_dir/subdir2");
 916         push(@dirs, "$dfree_share_dir/subdir3");
 917
 918         my $quotadir_dir="$share_dir/quota";
 919         push(@dirs, $quotadir_dir);
 920
 921         my $valid_users_sharedir="$share_dir/valid_users";
 922         push(@dirs,$valid_users_sharedir);
 923
 924         my $offline_sharedir="$share_dir/offline";
 925         push(@dirs,$offline_sharedir);
 926
 927         my $force_user_valid_users_dir = "$share_dir/force_user_valid_users";
 928         push(@dirs, $force_user_valid_users_dir);
 929
 930         my $smbget_sharedir="$share_dir/smbget";
 931         push(@dirs,$smbget_sharedir);
 932
 933         my $tarmode_sharedir="$share_dir/tarmode";
 934         push(@dirs,$tarmode_sharedir);
 935
 936         my $usershare_sharedir="$share_dir/usershares";
 937         push(@dirs,$usershare_sharedir);
 938
 939         my $fileserver_options = "
 940         kernel change notify = yes
 941
 942         usershare path = $usershare_dir
 943         usershare max shares = 10
 944         usershare allow guests = yes
 945         usershare prefix allow list = $usershare_sharedir
 946
 947         get quota command = $prefix_abs/getset_quota.py
 948         set quota command = $prefix_abs/getset_quota.py
 949 [lowercase]
 950         path = $lower_case_share_dir
 951         comment = smb username is [%U]
 952         case sensitive = True
 953         default case = lower
 954         preserve case = no
 955         short preserve case = no
 956 [lowercase-30000]
 957         path = $lower_case_share_dir_30000
 958         comment = smb username is [%U]
 959         case sensitive = True
 960         default case = lower
 961         preserve case = no
 962         short preserve case = no
 963 [dfree]
 964         path = $dfree_share_dir
 965         comment = smb username is [%U]
 966         dfree command = $srcdir_abs/testprogs/blackbox/dfree.sh
 967 [valid-users-access]
 968         path = $valid_users_sharedir
 969         valid users = +userdup
 970 [offline]
 971         path = $offline_sharedir
 972         vfs objects = offline
 973
 974 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
 975 # RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
 976 [force_user_valid_users]
 977         path = $force_user_valid_users_dir
 978         comment = force user with valid users combination test share
 979         valid users = +force_user
 980         force user = force_user
 981         force group = everyone
 982         write list = force_user
 983
 984 [smbget]
 985         path = $smbget_sharedir
 986         comment = smb username is [%U]
 987         guest ok = yes
 988 [ign_sysacls]
 989         path = $share_dir
 990         comment = ignore system acls
 991         acl_xattr:ignore system acls = yes
 992 [inherit_owner]
 993         path = $share_dir
 994         comment = inherit owner
 995         inherit owner = yes
 996 [inherit_owner_u]
 997         path = $share_dir
 998         comment = inherit only unix owner
 999         inherit owner = unix only
1000         acl_xattr:ignore system acls = yes
1001 # BUG: https://bugzilla.samba.org/show_bug.cgi?id=13690
1002 [force_group_test]
1003         path = $share_dir
1004         comment = force group test
1005 #       force group = everyone
1006 [homes]
1007         comment = Home directories
1008         browseable = No
1009         read only = No
1010 ";
1011
1012         my $vars = $self->provision($path, "WORKGROUP",
1013                                     "FILESERVER",
1014                                     "fileserver",
1015                                     $fileserver_options,
1016                                     undef,
1017                                     undef,
1018                                     1);
1019
1020         $vars or return undef;
1021
1022         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1023                return undef;
1024         }
1025
1026
1027         mkdir($_, 0777) foreach(@dirs);
1028
1029         ## Create case sensitive lower case share dir
1030         foreach my $file ('a'..'z') {
1031                 my $full_path = $lower_case_share_dir . '/' . $file;
1032                 open my $fh, '>', $full_path;
1033                 # Add some content to file
1034                 print $fh $full_path;
1035                 close $fh;
1036         }
1037
1038         for (my $file = 1; $file < 51; ++$file) {
1039                 my $full_path = $lower_case_share_dir . '/' . $file;
1040                 open my $fh, '>', $full_path;
1041                 # Add some content to file
1042                 print $fh $full_path;
1043                 close $fh;
1044         }
1045
1046         # Create content for 30000 share
1047         foreach my $file ('a'..'z') {
1048                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1049                 open my $fh, '>', $full_path;
1050                 # Add some content to file
1051                 print $fh $full_path;
1052                 close $fh;
1053         }
1054
1055         for (my $file = 1; $file < 30001; ++$file) {
1056                 my $full_path = $lower_case_share_dir_30000 . '/' . $file;
1057                 open my $fh, '>', $full_path;
1058                 # Add some content to file
1059                 print $fh $full_path;
1060                 close $fh;
1061         }
1062
1063         ##
1064         ## create a listable file in valid_users_share
1065         ##
1066         my $valid_users_target = "$valid_users_sharedir/foo";
1067         unless (open(VALID_USERS_TARGET, ">$valid_users_target")) {
1068                 warn("Unable to open $valid_users_target");
1069                 return undef;
1070         }
1071         close(VALID_USERS_TARGET);
1072         chmod 0644, $valid_users_target;
1073
1074         return $vars;
1075 }
1076
1077 sub setup_ktest
1078 {
1079         my ($self, $prefix) = @_;
1080
1081         # If we didn't build with ADS, pretend this env was never available
1082         if (not $self->have_ads()) {
1083                 return "UNKNOWN";
1084         }
1085
1086         print "PROVISIONING server with security=ads...";
1087
1088         my $ktest_options = "
1089         workgroup = KTEST
1090         realm = ktest.samba.example.com
1091         security = ads
1092         username map = $prefix/lib/username.map
1093         server signing = required
1094         server min protocol = SMB3_00
1095         client max protocol = SMB3
1096
1097         # This disables NTLM auth against the local SAM, which
1098         # we use can then test this setting by.
1099         ntlm auth = disabled
1100 ";
1101
1102         my $ret = $self->provision($prefix, "KTEST",
1103                                    "LOCALKTEST6",
1104                                    "localktest6pass",
1105                                    $ktest_options);
1106
1107         $ret or return undef;
1108
1109         my $ctx;
1110         my $prefix_abs = abs_path($prefix);
1111         $ctx = {};
1112         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
1113         $ctx->{domain} = "KTEST";
1114         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
1115         $ctx->{dnsname} = lc($ctx->{realm});
1116         $ctx->{kdc_ipv4} = "0.0.0.0";
1117         $ctx->{kdc_ipv6} = "::";
1118         $ctx->{krb5_ccname} = "$prefix_abs/krb5cc_%{uid}";
1119         Samba::mk_krb5_conf($ctx, "");
1120
1121         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
1122
1123         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
1124         print USERMAP "
1125 $ret->{USERNAME} = KTEST\\Administrator
1126 ";
1127         close(USERMAP);
1128
1129 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
1130 #Samba4 DC with the same parameters as are being used here.  The
1131 #domain SID is S-1-5-21-1071277805-689288055-3486227160
1132         $ret->{SAMSID} = "S-1-5-21-1911091480-1468226576-2729736297";
1133         $ret->{DOMSID} = "S-1-5-21-1071277805-689288055-3486227160";
1134
1135         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
1136         chmod 0600, "$prefix/private/secrets.tdb";
1137
1138 #Make sure there's no old ntdb file.
1139         system("rm -f $prefix/private/secrets.ntdb");
1140
1141 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
1142 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
1143 #
1144 #and having in krb5.conf:
1145 # ticket_lifetime = 799718400
1146 # renew_lifetime = 799718400
1147 #
1148 # The commands for the -2 keytab where were:
1149 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
1150 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
1151 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
1152 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1153 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
1154 #
1155 # and then for the -3 keytab, I did
1156 #
1157 # net changetrustpw; kdestroy and the same again.
1158 #
1159 # This creates a credential cache with a very long lifetime (2036 at
1160 # at 2011-04), and shows that running 'net changetrustpw' does not
1161 # break existing logins (for the secrets.tdb method at least).
1162 #
1163
1164         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
1165
1166         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
1167         chmod 0600, "$prefix/krb5_ccache-2";
1168
1169         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
1170         chmod 0600, "$prefix/krb5_ccache-3";
1171
1172         # We need world access to this share, as otherwise the domain
1173         # administrator from the AD domain provided by ktest can't
1174         # access the share for tests.
1175         chmod 0777, "$prefix/share";
1176
1177         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
1178                return undef;
1179         }
1180         return $ret;
1181 }
1182
1183 sub setup_maptoguest
1184 {
1185         my ($self, $path) = @_;
1186
1187         print "PROVISIONING maptoguest...";
1188
1189         my $options = "
1190 map to guest = bad user
1191 ntlm auth = yes
1192 ";
1193
1194         my $vars = $self->provision($path, "WORKGROUP",
1195                                     "maptoguest",
1196                                     "maptoguestpass",
1197                                     $options);
1198
1199         $vars or return undef;
1200
1201         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
1202                return undef;
1203         }
1204
1205         return $vars;
1206 }
1207
1208 sub stop_sig_term($$) {
1209         my ($self, $pid) = @_;
1210         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1211 }
1212
1213 sub stop_sig_kill($$) {
1214         my ($self, $pid) = @_;
1215         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
1216 }
1217
1218 sub write_pid($$$)
1219 {
1220         my ($env_vars, $app, $pid) = @_;
1221
1222         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
1223         print PID $pid;
1224         close(PID);
1225 }
1226
1227 sub read_pid($$)
1228 {
1229         my ($env_vars, $app) = @_;
1230
1231         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
1232         my $pid = <PID>;
1233         close(PID);
1234         return $pid;
1235 }
1236
1237 sub check_or_start($$$$$) {
1238         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
1239
1240         # use a pipe for stdin in the child processes. This allows
1241         # those processes to monitor the pipe for EOF to ensure they
1242         # exit when the test script exits
1243         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
1244
1245         unlink($env_vars->{NMBD_TEST_LOG});
1246         print "STARTING NMBD...";
1247         my $pid = fork();
1248         if ($pid == 0) {
1249                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
1250                 open STDERR, '>&STDOUT';
1251
1252                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1253
1254                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1255                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.nmbd";
1256                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1257                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1258
1259                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1260                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1261                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1262                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1263                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1264                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1265                 $ENV{UID_WRAPPER_ROOT} = "1";
1266
1267                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
1268
1269                 if ($nmbd ne "yes") {
1270                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1271                                 my $signame = shift;
1272                                 print("Skip nmbd received signal $signame");
1273                                 exit 0;
1274                         };
1275                         sleep($self->{server_maxtime});
1276                         exit 0;
1277                 }
1278
1279                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
1280                 my @optargs = ("-d0");
1281                 if (defined($ENV{NMBD_OPTIONS})) {
1282                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
1283                 }
1284                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1285                 if(defined($ENV{NMBD_VALGRIND})) {
1286                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
1287                 }
1288                 my @args = ("-F", "--no-process-group",
1289                             "-s", $env_vars->{SERVERCONFFILE},
1290                             "-l", $env_vars->{LOGDIR});
1291                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
1292                         push(@args, "--log-stdout");
1293                 }
1294
1295                 close($env_vars->{STDIN_PIPE});
1296                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1297
1298                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1299                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1300         }
1301         $env_vars->{NMBD_TL_PID} = $pid;
1302         write_pid($env_vars, "nmbd", $pid);
1303         print "DONE\n";
1304
1305         unlink($env_vars->{WINBINDD_TEST_LOG});
1306         print "STARTING WINBINDD...";
1307         $pid = fork();
1308         if ($pid == 0) {
1309                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
1310                 open STDERR, '>&STDOUT';
1311
1312                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1313
1314                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1315                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.winbindd";
1316                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1317                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1318
1319                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1320                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1321                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1322                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1323                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1324                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1325                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1326                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1327                 } else {
1328                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1329                 }
1330                 $ENV{UID_WRAPPER_ROOT} = "1";
1331
1332                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
1333
1334                 if ($winbindd ne "yes") {
1335                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1336                                 my $signame = shift;
1337                                 print("Skip winbindd received signal $signame");
1338                                 exit 0;
1339                         };
1340                         sleep($self->{server_maxtime});
1341                         exit 0;
1342                 }
1343
1344                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
1345                 my @optargs = ("-d0");
1346                 if (defined($ENV{WINBINDD_OPTIONS})) {
1347                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
1348                 }
1349                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1350                 if(defined($ENV{WINBINDD_VALGRIND})) {
1351                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
1352                 }
1353                 my @args = ("-F", "--no-process-group",
1354                             "-s", $env_vars->{SERVERCONFFILE},
1355                             "-l", $env_vars->{LOGDIR});
1356                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
1357                         push(@args, "--stdout");
1358                 }
1359
1360                 close($env_vars->{STDIN_PIPE});
1361                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1362
1363                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1364                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1365         }
1366         $env_vars->{WINBINDD_TL_PID} = $pid;
1367         write_pid($env_vars, "winbindd", $pid);
1368         print "DONE\n";
1369
1370         unlink($env_vars->{SMBD_TEST_LOG});
1371         print "STARTING SMBD...";
1372         $pid = fork();
1373         if ($pid == 0) {
1374                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
1375                 open STDERR, '>&STDOUT';
1376
1377                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
1378
1379                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
1380                 $ENV{KRB5CCNAME} = "$env_vars->{KRB5_CCACHE}.smbd";
1381                 $ENV{SELFTEST_WINBINDD_SOCKET_DIR} = $env_vars->{SELFTEST_WINBINDD_SOCKET_DIR};
1382                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
1383
1384                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
1385                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
1386                 $ENV{NSS_WRAPPER_HOSTS} = $env_vars->{NSS_WRAPPER_HOSTS};
1387                 $ENV{NSS_WRAPPER_HOSTNAME} = $env_vars->{NSS_WRAPPER_HOSTNAME};
1388                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
1389                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
1390                 if (defined($env_vars->{RESOLV_WRAPPER_CONF})) {
1391                         $ENV{RESOLV_WRAPPER_CONF} = $env_vars->{RESOLV_WRAPPER_CONF};
1392                 } else {
1393                         $ENV{RESOLV_WRAPPER_HOSTS} = $env_vars->{RESOLV_WRAPPER_HOSTS};
1394                 }
1395                 $ENV{UID_WRAPPER_ROOT} = "1";
1396
1397                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
1398
1399                 if ($smbd ne "yes") {
1400                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
1401                                 my $signame = shift;
1402                                 print("Skip smbd received signal $signame");
1403                                 exit 0;
1404                         };
1405                         sleep($self->{server_maxtime});
1406                         exit 0;
1407                 }
1408
1409                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
1410                 my @optargs = ("-d0");
1411                 if (defined($ENV{SMBD_OPTIONS})) {
1412                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
1413                 }
1414                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
1415                 if(defined($ENV{SMBD_VALGRIND})) {
1416                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
1417                 }
1418                 my @args = ("-F", "--no-process-group",
1419                             "-s", $env_vars->{SERVERCONFFILE},
1420                             "-l", $env_vars->{LOGDIR});
1421                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
1422                         push(@args, "--log-stdout");
1423                 }
1424
1425                 close($env_vars->{STDIN_PIPE});
1426                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
1427
1428                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
1429                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
1430         }
1431         $env_vars->{SMBD_TL_PID} = $pid;
1432         write_pid($env_vars, "smbd", $pid);
1433         print "DONE\n";
1434
1435         close(STDIN_READER);
1436
1437         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
1438 }
1439
1440 sub createuser($$$$$)
1441 {
1442         my ($self, $username, $password, $conffile, $env) = @_;
1443         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $username > /dev/null";
1444
1445         keys %$env;
1446         while(my($var, $val) = each %$env) {
1447                 $cmd = "$var=\"$val\" $cmd";
1448         }
1449
1450         unless (open(PWD, "|$cmd")) {
1451             warn("Unable to set password for $username account\n$cmd");
1452             return undef;
1453         }
1454         print PWD "$password\n$password\n";
1455         unless (close(PWD)) {
1456             warn("Unable to set password for $username account\n$cmd");
1457             return undef;
1458         }
1459 }
1460
1461 sub provision($$$$$$$$$)
1462 {
1463         my ($self, $prefix, $domain, $server, $password, $extra_options, $dc_server_ip, $dc_server_ipv6, $no_delete_prefix) = @_;
1464
1465         ##
1466         ## setup the various environment variables we need
1467         ##
1468
1469         my $samsid = Samba::random_domain_sid();
1470         my $swiface = Samba::get_interface($server);
1471         my %ret = ();
1472         my %createuser_env = ();
1473         my $server_ip = Samba::get_ipv4_addr($server);
1474         my $server_ipv6 = Samba::get_ipv6_addr($server);
1475
1476         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
1477         chomp $unix_name;
1478         my $unix_uid = $>;
1479         my $unix_gids_str = $);
1480         my @unix_gids = split(" ", $unix_gids_str);
1481
1482         my $prefix_abs = abs_path($prefix);
1483         my $bindir_abs = abs_path($self->{bindir});
1484
1485         my @dirs = ();
1486
1487         my $shrdir="$prefix_abs/share";
1488         push(@dirs,$shrdir);
1489
1490         my $libdir="$prefix_abs/lib";
1491         push(@dirs,$libdir);
1492
1493         my $piddir="$prefix_abs/pid";
1494         push(@dirs,$piddir);
1495
1496         my $privatedir="$prefix_abs/private";
1497         push(@dirs,$privatedir);
1498
1499         my $binddnsdir = "$prefix_abs/bind-dns";
1500         push(@dirs, $binddnsdir);
1501
1502         my $lockdir="$prefix_abs/lockdir";
1503         push(@dirs,$lockdir);
1504
1505         my $eventlogdir="$prefix_abs/lockdir/eventlog";
1506         push(@dirs,$eventlogdir);
1507
1508         my $logdir="$prefix_abs/logs";
1509         push(@dirs,$logdir);
1510
1511         my $driver32dir="$shrdir/W32X86";
1512         push(@dirs,$driver32dir);
1513
1514         my $driver64dir="$shrdir/x64";
1515         push(@dirs,$driver64dir);
1516
1517         my $driver40dir="$shrdir/WIN40";
1518         push(@dirs,$driver40dir);
1519
1520         my $ro_shrdir="$shrdir/root-tmp";
1521         push(@dirs,$ro_shrdir);
1522
1523         my $msdfs_shrdir="$shrdir/msdfsshare";
1524         push(@dirs,$msdfs_shrdir);
1525
1526         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
1527         push(@dirs,$msdfs_deeppath);
1528
1529         my $badnames_shrdir="$shrdir/badnames";
1530         push(@dirs,$badnames_shrdir);
1531
1532         my $lease1_shrdir="$shrdir/SMB2_10";
1533         push(@dirs,$lease1_shrdir);
1534
1535         my $lease2_shrdir="$shrdir/SMB3_00";
1536         push(@dirs,$lease2_shrdir);
1537
1538         my $manglenames_shrdir="$shrdir/manglenames";
1539         push(@dirs,$manglenames_shrdir);
1540
1541         my $widelinks_shrdir="$shrdir/widelinks";
1542         push(@dirs,$widelinks_shrdir);
1543
1544         my $widelinks_linkdir="$shrdir/widelinks_foo";
1545         push(@dirs,$widelinks_linkdir);
1546
1547         my $shadow_tstdir="$shrdir/shadow";
1548         push(@dirs,$shadow_tstdir);
1549         my $shadow_mntdir="$shadow_tstdir/mount";
1550         push(@dirs,$shadow_mntdir);
1551         my $shadow_basedir="$shadow_mntdir/base";
1552         push(@dirs,$shadow_basedir);
1553         my $shadow_shrdir="$shadow_basedir/share";
1554         push(@dirs,$shadow_shrdir);
1555
1556         my $nosymlinks_shrdir="$shrdir/nosymlinks";
1557         push(@dirs,$nosymlinks_shrdir);
1558
1559         my $local_symlinks_shrdir="$shrdir/local_symlinks";
1560         push(@dirs,$local_symlinks_shrdir);
1561
1562         # this gets autocreated by winbindd
1563         my $wbsockdir="$prefix_abs/winbindd";
1564
1565         my $nmbdsockdir="$prefix_abs/nmbd";
1566         unlink($nmbdsockdir);
1567
1568         ##
1569         ## create the test directory layout
1570         ##
1571         die ("prefix_abs = ''") if $prefix_abs eq "";
1572         die ("prefix_abs = '/'") if $prefix_abs eq "/";
1573
1574         mkdir($prefix_abs, 0777);
1575         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
1576         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
1577             system("rm -rf $prefix_abs/*");
1578         }
1579         mkdir($_, 0777) foreach(@dirs);
1580
1581         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
1582
1583         ##
1584         ## lockdir and piddir must be 0755
1585         ##
1586         chmod 0755, $lockdir;
1587         chmod 0755, $piddir;
1588
1589
1590         ##
1591         ## create ro and msdfs share layout
1592         ##
1593
1594         chmod 0755, $ro_shrdir;
1595         my $unreadable_file = "$ro_shrdir/unreadable_file";
1596         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
1597                 warn("Unable to open $unreadable_file");
1598                 return undef;
1599         }
1600         close(UNREADABLE_FILE);
1601         chmod 0600, $unreadable_file;
1602
1603         my $msdfs_target = "$ro_shrdir/msdfs-target";
1604         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
1605                 warn("Unable to open $msdfs_target");
1606                 return undef;
1607         }
1608         close(MSDFS_TARGET);
1609         chmod 0666, $msdfs_target;
1610         symlink "msdfs:$server_ip\\ro-tmp,$server_ipv6\\ro-tmp",
1611                 "$msdfs_shrdir/msdfs-src1";
1612         symlink "msdfs:$server_ipv6\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
1613
1614         ##
1615         ## create bad names in $badnames_shrdir
1616         ##
1617         ## (An invalid name, would be mangled to 8.3).
1618         my $badname_target = "$badnames_shrdir/\340|\231\216\377\177";
1619         unless (open(BADNAME_TARGET, ">$badname_target")) {
1620                 warn("Unable to open $badname_target");
1621                 return undef;
1622         }
1623         close(BADNAME_TARGET);
1624         chmod 0666, $badname_target;
1625
1626         ## (A bad name, would not be mangled to 8.3).
1627         my $badname_target = "$badnames_shrdir/\240\276\346\327\377\177";
1628         unless (open(BADNAME_TARGET, ">$badname_target")) {
1629                 warn("Unable to open $badname_target");
1630                 return undef;
1631         }
1632         close(BADNAME_TARGET);
1633         chmod 0666, $badname_target;
1634
1635         ## (A bad good name).
1636         my $badname_target = "$badnames_shrdir/blank.txt";
1637         unless (open(BADNAME_TARGET, ">$badname_target")) {
1638                 warn("Unable to open $badname_target");
1639                 return undef;
1640         }
1641         close(BADNAME_TARGET);
1642         chmod 0666, $badname_target;
1643
1644         ##
1645         ## create mangleable directory names in $manglenames_shrdir
1646         ##
1647         my $manglename_target = "$manglenames_shrdir/foo:bar";
1648         mkdir($manglename_target, 0777);
1649
1650         ##
1651         ## create symlinks for widelinks tests.
1652         ##
1653         my $widelinks_target = "$widelinks_linkdir/target";
1654         unless (open(WIDELINKS_TARGET, ">$widelinks_target")) {
1655                 warn("Unable to open $widelinks_target");
1656                 return undef;
1657         }
1658         close(WIDELINKS_TARGET);
1659         chmod 0666, $widelinks_target;
1660         ##
1661         ## This link should get ACCESS_DENIED
1662         ##
1663         symlink "$widelinks_target", "$widelinks_shrdir/source";
1664         ##
1665         ## This link should be allowed
1666         ##
1667         symlink "$widelinks_shrdir", "$widelinks_shrdir/dot";
1668
1669         my $conffile="$libdir/server.conf";
1670         my $dfqconffile="$libdir/dfq.conf";
1671         my $errorinjectconf="$libdir/error_inject.conf";
1672         my $delayinjectconf="$libdir/delay_inject.conf";
1673
1674         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/third_party/nss_wrapper/nss_wrapper.pl";
1675         my $nss_wrapper_passwd = "$privatedir/passwd";
1676         my $nss_wrapper_group = "$privatedir/group";
1677         my $nss_wrapper_hosts = "$ENV{SELFTEST_PREFIX}/hosts";
1678         my $resolv_conf = "$privatedir/resolv.conf";
1679         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
1680
1681         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
1682
1683         my $fake_snap_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/fake_snap.pl";
1684
1685         my @eventlog_list = ("dns server", "application");
1686
1687         ##
1688         ## calculate uids and gids
1689         ##
1690
1691         my ($max_uid, $max_gid);
1692         my ($uid_nobody, $uid_root, $uid_pdbtest, $uid_pdbtest2, $uid_userdup);
1693         my ($uid_pdbtest_wkn);
1694         my ($uid_smbget);
1695         my ($uid_force_user);
1696         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
1697         my ($gid_userdup, $gid_everyone);
1698         my ($gid_force_user);
1699         my ($uid_user1);
1700         my ($uid_user2);
1701         my ($uid_gooduser);
1702         my ($uid_eviluser);
1703         my ($uid_slashuser);
1704
1705         if ($unix_uid < 0xffff - 13) {
1706                 $max_uid = 0xffff;
1707         } else {
1708                 $max_uid = $unix_uid;
1709         }
1710
1711         $uid_root = $max_uid - 1;
1712         $uid_nobody = $max_uid - 2;
1713         $uid_pdbtest = $max_uid - 3;
1714         $uid_pdbtest2 = $max_uid - 4;
1715         $uid_userdup = $max_uid - 5;
1716         $uid_pdbtest_wkn = $max_uid - 6;
1717         $uid_force_user = $max_uid - 7;
1718         $uid_smbget = $max_uid - 8;
1719         $uid_user1 = $max_uid - 9;
1720         $uid_user2 = $max_uid - 10;
1721         $uid_gooduser = $max_uid - 11;
1722         $uid_eviluser = $max_uid - 12;
1723         $uid_slashuser = $max_uid - 13;
1724
1725         if ($unix_gids[0] < 0xffff - 8) {
1726                 $max_gid = 0xffff;
1727         } else {
1728                 $max_gid = $unix_gids[0];
1729         }
1730
1731         $gid_nobody = $max_gid - 1;
1732         $gid_nogroup = $max_gid - 2;
1733         $gid_root = $max_gid - 3;
1734         $gid_domusers = $max_gid - 4;
1735         $gid_domadmins = $max_gid - 5;
1736         $gid_userdup = $max_gid - 6;
1737         $gid_everyone = $max_gid - 7;
1738         $gid_force_user = $max_gid - 8;
1739
1740         ##
1741         ## create conffile
1742         ##
1743
1744         unless (open(CONF, ">$conffile")) {
1745                 warn("Unable to open $conffile");
1746                 return undef;
1747         }
1748
1749         my $interfaces = Samba::get_interfaces_config($server);
1750
1751         print CONF "
1752 [global]
1753         netbios name = $server
1754         interfaces = $interfaces
1755         bind interfaces only = yes
1756         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
1757         smbd:suicide mode = yes
1758
1759         workgroup = $domain
1760
1761         private dir = $privatedir
1762         binddns dir = $binddnsdir
1763         pid directory = $piddir
1764         lock directory = $lockdir
1765         log file = $logdir/log.\%m
1766         log level = 1
1767         debug pid = yes
1768         max log size = 0
1769
1770         state directory = $lockdir
1771         cache directory = $lockdir
1772
1773         passdb backend = tdbsam
1774
1775         time server = yes
1776
1777         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1778         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
1779         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
1780         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
1781         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
1782         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
1783         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
1784
1785         addprinter command =            $mod_printer_pl -a -s $conffile --
1786         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1787
1788         eventlog list = application \"dns server\"
1789
1790         kernel oplocks = no
1791         kernel change notify = no
1792
1793         logging = file
1794         printing = bsd
1795         printcap name = /dev/null
1796
1797         winbindd socket directory = $wbsockdir
1798         nmbd:socket dir = $nmbdsockdir
1799         idmap config * : range = 100000-200000
1800         winbind enum users = yes
1801         winbind enum groups = yes
1802         winbind separator = /
1803         include system krb5 conf = no
1804
1805 #       min receivefile size = 4000
1806
1807         read only = no
1808
1809         smbd:sharedelay = 100000
1810         smbd:writetimeupdatedelay = 500000
1811         map hidden = no
1812         map system = no
1813         map readonly = no
1814         store dos attributes = yes
1815         create mask = 755
1816         dos filemode = yes
1817         strict rename = yes
1818         strict sync = yes
1819         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot time_audit full_audit
1820
1821         full_audit:syslog = no
1822         full_audit:success = none
1823         full_audit:failure = none
1824
1825         printing = vlp
1826         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1827         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1828         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1829         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1830         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1831         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1832         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1833         lpq cache time = 0
1834         print notify backchannel = yes
1835
1836         ncalrpc dir = $prefix_abs/ncalrpc
1837
1838         # The samba3.blackbox.smbclient_s3 test uses this to test that
1839         # sending messages works, and that the %m sub works.
1840         message command = mv %s $shrdir/message.%m
1841
1842         # fsrvp server requires registry shares
1843         registry shares = yes
1844
1845         # Used by RPC SRVSVC tests
1846         add share command = $bindir_abs/smbaddshare
1847         change share command = $bindir_abs/smbchangeshare
1848         delete share command = $bindir_abs/smbdeleteshare
1849
1850         # fruit:copyfile is a global option
1851         fruit:copyfile = yes
1852
1853         #this does not mean that we use non-secure test env,
1854         #it just means we ALLOW one to be configured.
1855         allow insecure wide links = yes
1856
1857         # Begin extra options
1858         $extra_options
1859         # End extra options
1860
1861         #Include user defined custom parameters if set
1862 ";
1863
1864         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1865                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1866         }
1867
1868         print CONF "
1869 [tmp]
1870         path = $shrdir
1871         comment = smb username is [%U]
1872 [tmpsort]
1873         path = $shrdir
1874         comment = Load dirsort module
1875         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1876 [tmpenc]
1877         path = $shrdir
1878         comment = encrypt smb username is [%U]
1879         smb encrypt = required
1880         vfs objects = dirsort
1881 [tmpguest]
1882         path = $shrdir
1883         guest ok = yes
1884 [guestonly]
1885         path = $shrdir
1886         guest only = yes
1887         guest ok = yes
1888 [forceuser]
1889         path = $shrdir
1890         force user = $unix_name
1891         guest ok = yes
1892 [forceuser_unixonly]
1893         comment = force a user with unix user SID and group SID
1894         path = $shrdir
1895         force user = pdbtest
1896         guest ok = yes
1897 [forceuser_wkngroup]
1898         comment = force a user with well-known group SID
1899         path = $shrdir
1900         force user = pdbtest_wkn
1901         guest ok = yes
1902 [forcegroup]
1903         path = $shrdir
1904         force group = nogroup
1905         guest ok = yes
1906 [ro-tmp]
1907         path = $ro_shrdir
1908         guest ok = yes
1909 [write-list-tmp]
1910         path = $shrdir
1911         read only = yes
1912         write list = $unix_name
1913 [valid-users-tmp]
1914         path = $shrdir
1915         valid users = $unix_name
1916         access based share enum = yes
1917 [msdfs-share]
1918         path = $msdfs_shrdir
1919         msdfs root = yes
1920         msdfs shuffle referrals = yes
1921         guest ok = yes
1922 [hideunread]
1923         copy = tmp
1924         hide unreadable = yes
1925 [tmpcase]
1926         copy = tmp
1927         case sensitive = yes
1928 [hideunwrite]
1929         copy = tmp
1930         hide unwriteable files = yes
1931 [durable]
1932         copy = tmp
1933         kernel share modes = no
1934         kernel oplocks = no
1935         posix locking = no
1936 [fs_specific]
1937         copy = tmp
1938         $fs_specific_conf
1939 [print1]
1940         copy = tmp
1941         printable = yes
1942
1943 [print2]
1944         copy = print1
1945 [print3]
1946         copy = print1
1947         default devmode = no
1948 [lp]
1949         copy = print1
1950
1951 [nfs4acl_simple_40]
1952         path = $shrdir
1953         comment = smb username is [%U]
1954         nfs4:mode = simple
1955         nfs4acl_xattr:version = 40
1956         vfs objects = nfs4acl_xattr xattr_tdb
1957
1958 [nfs4acl_special_40]
1959         path = $shrdir
1960         comment = smb username is [%U]
1961         nfs4:mode = special
1962         nfs4acl_xattr:version = 40
1963         vfs objects = nfs4acl_xattr xattr_tdb
1964
1965 [nfs4acl_simple_41]
1966         path = $shrdir
1967         comment = smb username is [%U]
1968         nfs4:mode = simple
1969         vfs objects = nfs4acl_xattr xattr_tdb
1970
1971 [nfs4acl_xdr_40]
1972         path = $shrdir
1973         comment = smb username is [%U]
1974         vfs objects = nfs4acl_xattr xattr_tdb
1975         nfs4:mode = simple
1976         nfs4acl_xattr:encoding = xdr
1977         nfs4acl_xattr:version = 40
1978
1979 [nfs4acl_xdr_41]
1980         path = $shrdir
1981         comment = smb username is [%U]
1982         vfs objects = nfs4acl_xattr xattr_tdb
1983         nfs4:mode = simple
1984         nfs4acl_xattr:encoding = xdr
1985         nfs4acl_xattr:version = 41
1986
1987 [nfs4acl_nfs_40]
1988         path = $shrdir
1989         comment = smb username is [%U]
1990         vfs objects = nfs4acl_xattr xattr_tdb
1991         nfs4:mode = simple
1992         nfs4acl_xattr:encoding = nfs
1993         nfs4acl_xattr:version = 40
1994         nfs4acl_xattr:xattr_name = security.nfs4acl_xdr
1995
1996 [nfs4acl_nfs_41]
1997         path = $shrdir
1998         comment = smb username is [%U]
1999         vfs objects = nfs4acl_xattr xattr_tdb
2000         nfs4:mode = simple
2001         nfs4acl_xattr:encoding = nfs
2002         nfs4acl_xattr:version = 41
2003         nfs4acl_xattr:xattr_name = security.nfs4acl_xdr
2004
2005 [xcopy_share]
2006         path = $shrdir
2007         comment = smb username is [%U]
2008         create mask = 777
2009         force create mode = 777
2010 [posix_share]
2011         path = $shrdir
2012         comment = smb username is [%U]
2013         create mask = 0777
2014         force create mode = 0
2015         directory mask = 0777
2016         force directory mode = 0
2017         vfs objects = xattr_tdb streams_depot
2018 [aio]
2019         copy = tmp
2020         aio read size = 1
2021         aio write size = 1
2022
2023 [print\$]
2024         copy = tmp
2025
2026 [vfs_fruit]
2027         path = $shrdir
2028         vfs objects = catia fruit streams_xattr acl_xattr xattr_tdb
2029         fruit:resource = file
2030         fruit:metadata = netatalk
2031         fruit:locking = netatalk
2032         fruit:encoding = native
2033         fruit:veto_appledouble = no
2034
2035 [vfs_fruit_xattr]
2036         path = $shrdir
2037         # This is used by vfs.fruit tests that require real fs xattr
2038         vfs objects = catia fruit streams_xattr acl_xattr
2039         fruit:resource = file
2040         fruit:metadata = netatalk
2041         fruit:locking = netatalk
2042         fruit:encoding = native
2043         fruit:veto_appledouble = no
2044
2045 [vfs_fruit_metadata_stream]
2046         path = $shrdir
2047         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2048         fruit:resource = file
2049         fruit:metadata = stream
2050         fruit:veto_appledouble = no
2051
2052 [vfs_fruit_stream_depot]
2053         path = $shrdir
2054         vfs objects = fruit streams_depot acl_xattr xattr_tdb
2055         fruit:resource = stream
2056         fruit:metadata = stream
2057         fruit:veto_appledouble = no
2058
2059 [vfs_wo_fruit]
2060         path = $shrdir
2061         vfs objects = streams_xattr acl_xattr xattr_tdb
2062
2063 [vfs_wo_fruit_stream_depot]
2064         path = $shrdir
2065         vfs objects = streams_depot acl_xattr xattr_tdb
2066
2067 [vfs_fruit_timemachine]
2068         path = $shrdir
2069         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2070         fruit:resource = file
2071         fruit:metadata = stream
2072         fruit:time machine = yes
2073         fruit:time machine max size = 32K
2074
2075 [vfs_fruit_wipe_intentionally_left_blank_rfork]
2076         path = $shrdir
2077         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2078         fruit:resource = file
2079         fruit:metadata = stream
2080         fruit:wipe_intentionally_left_blank_rfork = true
2081         fruit:delete_empty_adfiles = false
2082         fruit:veto_appledouble = no
2083
2084 [vfs_fruit_delete_empty_adfiles]
2085         path = $shrdir
2086         vfs objects = fruit streams_xattr acl_xattr xattr_tdb
2087         fruit:resource = file
2088         fruit:metadata = stream
2089         fruit:wipe_intentionally_left_blank_rfork = true
2090         fruit:delete_empty_adfiles = true
2091         fruit:veto_appledouble = no
2092
2093 [badname-tmp]
2094         path = $badnames_shrdir
2095         guest ok = yes
2096
2097 [manglenames_share]
2098         path = $manglenames_shrdir
2099         guest ok = yes
2100
2101 [dynamic_share]
2102         path = $shrdir/%R
2103         guest ok = yes
2104
2105 [widelinks_share]
2106         path = $widelinks_shrdir
2107         wide links = no
2108         guest ok = yes
2109
2110 [fsrvp_share]
2111         path = $shrdir
2112         comment = fake shapshots using rsync
2113         vfs objects = shell_snap shadow_copy2
2114         shell_snap:check path command = $fake_snap_pl --check
2115         shell_snap:create command = $fake_snap_pl --create
2116         shell_snap:delete command = $fake_snap_pl --delete
2117         # a relative path here fails, the snapshot dir is no longer found
2118         shadow:snapdir = $shrdir/.snapshots
2119
2120 [shadow1]
2121         path = $shadow_shrdir
2122         comment = previous versions snapshots under mount point
2123         vfs objects = shadow_copy2
2124         shadow:mountpoint = $shadow_mntdir
2125
2126 [shadow2]
2127         path = $shadow_shrdir
2128         comment = previous versions snapshots outside mount point
2129         vfs objects = shadow_copy2
2130         shadow:mountpoint = $shadow_mntdir
2131         shadow:snapdir = $shadow_tstdir/.snapshots
2132
2133 [shadow3]
2134         path = $shadow_shrdir
2135         comment = previous versions with subvolume snapshots, snapshots under base dir
2136         vfs objects = shadow_copy2
2137         shadow:mountpoint = $shadow_mntdir
2138         shadow:basedir = $shadow_basedir
2139         shadow:snapdir = $shadow_basedir/.snapshots
2140
2141 [shadow4]
2142         path = $shadow_shrdir
2143         comment = previous versions with subvolume snapshots, snapshots outside mount point
2144         vfs objects = shadow_copy2
2145         shadow:mountpoint = $shadow_mntdir
2146         shadow:basedir = $shadow_basedir
2147         shadow:snapdir = $shadow_tstdir/.snapshots
2148
2149 [shadow5]
2150         path = $shadow_shrdir
2151         comment = previous versions at volume root snapshots under mount point
2152         vfs objects = shadow_copy2
2153         shadow:mountpoint = $shadow_shrdir
2154
2155 [shadow6]
2156         path = $shadow_shrdir
2157         comment = previous versions at volume root snapshots outside mount point
2158         vfs objects = shadow_copy2
2159         shadow:mountpoint = $shadow_shrdir
2160         shadow:snapdir = $shadow_tstdir/.snapshots
2161
2162 [shadow7]
2163         path = $shadow_shrdir
2164         comment = previous versions snapshots everywhere
2165         vfs objects = shadow_copy2
2166         shadow:mountpoint = $shadow_mntdir
2167         shadow:snapdirseverywhere = yes
2168
2169 [shadow8]
2170         path = $shadow_shrdir
2171         comment = previous versions using snapsharepath
2172         vfs objects = shadow_copy2
2173         shadow:mountpoint = $shadow_mntdir
2174         shadow:snapdir = $shadow_tstdir/.snapshots
2175         shadow:snapsharepath = share
2176
2177 [shadow_fmt0]
2178         comment = Testing shadow:format with default option
2179         vfs object = shadow_copy2
2180         path = $shadow_shrdir
2181         read only = no
2182         guest ok = yes
2183         shadow:mountpoint = $shadow_mntdir
2184         shadow:basedir = $shadow_basedir
2185         shadow:snapdir = $shadow_basedir/.snapshots
2186         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2187
2188 [shadow_fmt1]
2189         comment = Testing shadow:format with only date component
2190         vfs object = shadow_copy2
2191         path = $shadow_shrdir
2192         read only = no
2193         guest ok = yes
2194         shadow:mountpoint = $shadow_mntdir
2195         shadow:basedir = $shadow_basedir
2196         shadow:snapdir = $shadow_basedir/.snapshots
2197         shadow:format = \@GMT-%Y-%m-%d
2198
2199 [shadow_fmt2]
2200         comment = Testing shadow:format with some hardcoded prefix
2201         vfs object = shadow_copy2
2202         path = $shadow_shrdir
2203         read only = no
2204         guest ok = yes
2205         shadow:mountpoint = $shadow_mntdir
2206         shadow:basedir = $shadow_basedir
2207         shadow:snapdir = $shadow_basedir/.snapshots
2208         shadow:format = snap\@GMT-%Y.%m.%d-%H.%M.%S
2209
2210 [shadow_fmt3]
2211         comment = Testing shadow:format with modified format
2212         vfs object = shadow_copy2
2213         path = $shadow_shrdir
2214         read only = no
2215         guest ok = yes
2216         shadow:mountpoint = $shadow_mntdir
2217         shadow:basedir = $shadow_basedir
2218         shadow:snapdir = $shadow_basedir/.snapshots
2219         shadow:format = \@GMT-%Y.%m.%d-%H_%M_%S-snap
2220
2221 [shadow_fmt4]
2222         comment = Testing shadow:snapprefix regex
2223         vfs object = shadow_copy2
2224         path = $shadow_shrdir
2225         read only = no
2226         guest ok = yes
2227         shadow:mountpoint = $shadow_mntdir
2228         shadow:basedir = $shadow_basedir
2229         shadow:snapdir = $shadow_basedir/.snapshots
2230         shadow:snapprefix = \^s[a-z]*p\$
2231         shadow:format = _GMT-%Y.%m.%d-%H.%M.%S
2232
2233 [shadow_fmt5]
2234         comment = Testing shadow:snapprefix with delim regex
2235         vfs object = shadow_copy2
2236         path = $shadow_shrdir
2237         read only = no
2238         guest ok = yes
2239         shadow:mountpoint = $shadow_mntdir
2240         shadow:basedir = $shadow_basedir
2241         shadow:snapdir = $shadow_basedir/.snapshots
2242         shadow:delimiter = \@GMT
2243         shadow:snapprefix = [a-z]*
2244         shadow:format = \@GMT-%Y.%m.%d-%H.%M.%S
2245
2246 [shadow_wl]
2247         path = $shadow_shrdir
2248         comment = previous versions with wide links allowed
2249         vfs objects = shadow_copy2
2250         shadow:mountpoint = $shadow_mntdir
2251         wide links = yes
2252
2253 [shadow_write]
2254         path = $shadow_tstdir
2255         comment = previous versions snapshots under mount point
2256         vfs objects = shadow_copy2 streams_xattr error_inject
2257         aio write size = 0
2258         error_inject:pwrite = EBADF
2259         shadow:mountpoint = $shadow_tstdir
2260
2261 [dfq]
2262         path = $shrdir/dfree
2263         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2264         admin users = $unix_name
2265         include = $dfqconffile
2266 [dfq_cache]
2267         path = $shrdir/dfree
2268         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2269         admin users = $unix_name
2270         include = $dfqconffile
2271         dfree cache time = 60
2272 [dfq_owner]
2273         path = $shrdir/dfree
2274         vfs objects = acl_xattr fake_acls xattr_tdb fake_dfq
2275         inherit owner = yes
2276         include = $dfqconffile
2277 [quotadir]
2278         path = $shrdir/quota
2279         admin users = $unix_name
2280
2281 [acl_xattr_ign_sysacl_posix]
2282         copy = tmp
2283         acl_xattr:ignore system acls = yes
2284         acl_xattr:default acl style = posix
2285 [acl_xattr_ign_sysacl_windows]
2286         copy = tmp
2287         acl_xattr:ignore system acls = yes
2288         acl_xattr:default acl style = windows
2289
2290 [mangle_illegal]
2291         copy = tmp
2292         mangled names = illegal
2293
2294 [nosymlinks]
2295         copy = tmp
2296         path = $nosymlinks_shrdir
2297         follow symlinks = no
2298
2299 [local_symlinks]
2300         copy = tmp
2301         path = $local_symlinks_shrdir
2302         follow symlinks = yes
2303
2304 [kernel_oplocks]
2305         copy = tmp
2306         kernel oplocks = yes
2307         vfs objects = streams_xattr xattr_tdb
2308
2309 [streams_xattr]
2310         copy = tmp
2311         vfs objects = streams_xattr xattr_tdb
2312
2313 [compound_find]
2314         copy = tmp
2315         smbd:find async delay usec = 10000
2316 [error_inject]
2317         copy = tmp
2318         vfs objects = error_inject
2319         include = $errorinjectconf
2320
2321 [delay_inject]
2322         copy = tmp
2323         vfs objects = delay_inject
2324         kernel share modes = no
2325         kernel oplocks = no
2326         posix locking = no
2327         include = $delayinjectconf
2328
2329 [aio_delay_inject]
2330         copy = tmp
2331         vfs objects = delay_inject
2332         delay_inject:pread_send = 2000
2333         delay_inject:pwrite_send = 2000
2334
2335 [delete_readonly]
2336         path = $prefix_abs/share
2337         delete readonly = yes
2338         ";
2339         close(CONF);
2340
2341         my $net = Samba::bindir_path($self, "net");
2342         my $cmd = "";
2343         $cmd .= "SMB_CONF_PATH=\"$conffile\" ";
2344         $cmd .= "$net setlocalsid $samsid";
2345
2346         if (system($cmd) != 0) {
2347             warn("Join failed\n$cmd");
2348             return undef;
2349         }
2350
2351         unless (open(ERRORCONF, ">$errorinjectconf")) {
2352                 warn("Unable to open $errorinjectconf");
2353                 return undef;
2354         }
2355         close(ERRORCONF);
2356
2357         unless (open(DELAYCONF, ">$delayinjectconf")) {
2358                 warn("Unable to open $delayinjectconf");
2359                 return undef;
2360         }
2361         close(DELAYCONF);
2362
2363         unless (open(DFQCONF, ">$dfqconffile")) {
2364                 warn("Unable to open $dfqconffile");
2365                 return undef;
2366         }
2367         close(DFQCONF);
2368
2369         ##
2370         ## create a test account
2371         ##
2372
2373         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
2374            warn("Unable to open $nss_wrapper_passwd");
2375            return undef;
2376         }
2377         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
2378 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
2379 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2380 pdbtest2:x:$uid_pdbtest2:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
2381 userdup:x:$uid_userdup:$gid_userdup:userdup gecos:$prefix_abs:/bin/false
2382 pdbtest_wkn:x:$uid_pdbtest_wkn:$gid_everyone:pdbtest_wkn gecos:$prefix_abs:/bin/false
2383 force_user:x:$uid_force_user:$gid_force_user:force user gecos:$prefix_abs:/bin/false
2384 smbget_user:x:$uid_smbget:$gid_domusers:smbget_user gecos:$prefix_abs:/bin/false
2385 user1:x:$uid_user1:$gid_nogroup:user1 gecos:$prefix_abs:/bin/false
2386 user2:x:$uid_user2:$gid_nogroup:user2 gecos:$prefix_abs:/bin/false
2387 gooduser:x:$uid_gooduser:$gid_domusers:gooduser gecos:$prefix_abs:/bin/false
2388 eviluser:x:$uid_eviluser:$gid_domusers:eviluser gecos::/bin/false
2389 slashuser:x:$uid_slashuser:$gid_domusers:slashuser gecos:/:/bin/false
2390 ";
2391         if ($unix_uid != 0) {
2392                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
2393 ";
2394         }
2395         close(PASSWD);
2396
2397         unless (open(GROUP, ">$nss_wrapper_group")) {
2398              warn("Unable to open $nss_wrapper_group");
2399              return undef;
2400         }
2401         print GROUP "nobody:x:$gid_nobody:
2402 nogroup:x:$gid_nogroup:nobody
2403 $unix_name-group:x:$unix_gids[0]:
2404 domusers:X:$gid_domusers:
2405 domadmins:X:$gid_domadmins:
2406 userdup:x:$gid_userdup:$unix_name
2407 everyone:x:$gid_everyone:
2408 force_user:x:$gid_force_user:
2409 ";
2410         if ($unix_gids[0] != 0) {
2411                 print GROUP "root:x:$gid_root:
2412 ";
2413         }
2414
2415         close(GROUP);
2416
2417         ## hosts
2418         my $hostname = lc($server);
2419         unless (open(HOSTS, ">>$nss_wrapper_hosts")) {
2420                 warn("Unable to open $nss_wrapper_hosts");
2421                 return undef;
2422         }
2423         print HOSTS "${server_ip} ${hostname}.samba.example.com ${hostname}\n";
2424         print HOSTS "${server_ipv6} ${hostname}.samba.example.com ${hostname}\n";
2425         close(HOSTS);
2426
2427         ## hosts
2428         unless (open(RESOLV_CONF, ">$resolv_conf")) {
2429                 warn("Unable to open $resolv_conf");
2430                 return undef;
2431         }
2432         if (defined($dc_server_ip) or defined($dc_server_ipv6)) {
2433                 if (defined($dc_server_ip)) {
2434                         print RESOLV_CONF "nameserver $dc_server_ip\n";
2435                 }
2436                 if (defined($dc_server_ipv6)) {
2437                         print RESOLV_CONF "nameserver $dc_server_ipv6\n";
2438                 }
2439         } else {
2440                 print RESOLV_CONF "nameserver ${server_ip}\n";
2441                 print RESOLV_CONF "nameserver ${server_ipv6}\n";
2442         }
2443         close(RESOLV_CONF);
2444
2445         foreach my $evlog (@eventlog_list) {
2446                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
2447                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
2448                 close(EVENTLOG);
2449         }
2450
2451         $createuser_env{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2452         $createuser_env{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2453         $createuser_env{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2454         $createuser_env{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2455         if ($ENV{SAMBA_DNS_FAKING}) {
2456                 $createuser_env{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2457         } else {
2458                 $createuser_env{RESOLV_WRAPPER_CONF} = $resolv_conf;
2459         }
2460
2461         createuser($self, $unix_name, $password, $conffile, \%createuser_env) || die("Unable to create user");
2462         createuser($self, "force_user", $password, $conffile, \%createuser_env) || die("Unable to create force_user");
2463         createuser($self, "smbget_user", $password, $conffile, \%createuser_env) || die("Unable to create smbget_user");
2464         createuser($self, "user1", $password, $conffile, \%createuser_env) || die("Unable to create user1");
2465         createuser($self, "user2", $password, $conffile, \%createuser_env) || die("Unable to create user2");
2466         createuser($self, "gooduser", $password, $conffile, \%createuser_env) || die("Unable to create gooduser");
2467         createuser($self, "eviluser", $password, $conffile, \%createuser_env) || die("Unable to create eviluser");
2468         createuser($self, "slashuser", $password, $conffile, \%createuser_env) || die("Unable to create slashuser");
2469
2470         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
2471         print DNS_UPDATE_LIST "A $server. $server_ip\n";
2472         print DNS_UPDATE_LIST "AAAA $server. $server_ipv6\n";
2473         close(DNS_UPDATE_LIST);
2474
2475         print "DONE\n";
2476
2477         $ret{SERVER_IP} = $server_ip;
2478         $ret{SERVER_IPV6} = $server_ipv6;
2479         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
2480         $ret{NMBD_TEST_LOG_POS} = 0;
2481         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
2482         $ret{WINBINDD_TEST_LOG_POS} = 0;
2483         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
2484         $ret{SMBD_TEST_LOG_POS} = 0;
2485         $ret{SERVERCONFFILE} = $conffile;
2486         $ret{CONFIGURATION} ="-s $conffile";
2487         $ret{LOCK_DIR} = $lockdir;
2488         $ret{SERVER} = $server;
2489         $ret{USERNAME} = $unix_name;
2490         $ret{USERID} = $unix_uid;
2491         $ret{DOMAIN} = $domain;
2492         $ret{SAMSID} = $samsid;
2493         $ret{NETBIOSNAME} = $server;
2494         $ret{PASSWORD} = $password;
2495         $ret{PIDDIR} = $piddir;
2496         $ret{SELFTEST_WINBINDD_SOCKET_DIR} = $wbsockdir;
2497         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
2498         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
2499         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
2500         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
2501         $ret{NSS_WRAPPER_HOSTS} = $nss_wrapper_hosts;
2502         $ret{NSS_WRAPPER_HOSTNAME} = "${hostname}.samba.example.com";
2503         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
2504         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
2505         if ($ENV{SAMBA_DNS_FAKING}) {
2506                 $ret{RESOLV_WRAPPER_HOSTS} = $dns_host_file;
2507         } else {
2508                 $ret{RESOLV_WRAPPER_CONF} = $resolv_conf;
2509         }
2510         $ret{LOCAL_PATH} = "$shrdir";
2511         $ret{LOGDIR} = $logdir;
2512
2513         #
2514         # Avoid hitting system krb5.conf -
2515         # An env that needs Kerberos will reset this to the real
2516         # value.
2517         #
2518         $ret{KRB5_CONFIG} = abs_path($prefix) . "/no_krb5.conf";
2519
2520         # Define KRB5CCNAME for each environment we set up
2521         $ret{KRB5_CCACHE} = abs_path($prefix) . "/krb5ccache";
2522         $ENV{KRB5CCNAME} = $ret{KRB5_CCACHE};
2523
2524         return \%ret;
2525 }
2526
2527 sub wait_for_start($$$$$)
2528 {
2529         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
2530         my $cmd;
2531         my $netcmd;
2532         my $ret;
2533
2534         if ($nmbd eq "yes") {
2535                 my $count = 0;
2536
2537                 # give time for nbt server to register its names
2538                 print "checking for nmbd\n";
2539
2540                 # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
2541                 my $nmblookup = Samba::bindir_path($self, "nmblookup");
2542
2543                 do {
2544                         $ret = system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
2545                         if ($ret != 0) {
2546                                 sleep(1);
2547                         } else {
2548                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
2549                                 system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
2550                                 system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
2551                                 system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
2552                         }
2553                         $count++;
2554                 } while ($ret != 0 && $count < 10);
2555                 if ($count == 10) {
2556                         print "NMBD not reachable after 10 retries\n";
2557                         teardown_env($self, $envvars);
2558                         return 0;
2559                 }
2560         }
2561
2562         if ($winbindd eq "yes") {
2563             print "checking for winbindd\n";
2564             my $count = 0;
2565             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2566             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2567             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2568             $cmd .= Samba::bindir_path($self, "wbinfo") . " --ping-dc";
2569
2570             do {
2571                 if ($ret != 0) {
2572                     $ret = system($cmd);
2573                     sleep(1);
2574                 }
2575                 $count++;
2576             } while ($ret != 0 && $count < 20);
2577             if ($count == 20) {
2578                 print "WINBINDD not reachable after 20 seconds\n";
2579                 teardown_env($self, $envvars);
2580                 return 0;
2581             }
2582         }
2583
2584         if ($smbd eq "yes") {
2585             # make sure smbd is also up set
2586             print "wait for smbd\n";
2587
2588             my $count = 0;
2589             do {
2590                 $ret = system(Samba::bindir_path($self, "smbclient") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
2591                 if ($ret != 0) {
2592                     sleep(1);
2593                 }
2594                 $count++
2595             } while ($ret != 0 && $count < 20);
2596             if ($count == 20) {
2597                 print "SMBD failed to start up in a reasonable time (20sec)\n";
2598                 teardown_env($self, $envvars);
2599                 return 0;
2600             }
2601         }
2602
2603         # Ensure we have domain users mapped.
2604         $netcmd = "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2605         $netcmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2606         $netcmd .= Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} ";
2607
2608         $cmd = $netcmd . "groupmap delete ntgroup=domusers";
2609         $ret = system($cmd);
2610
2611         $cmd = $netcmd . "groupmap add rid=513 unixgroup=domusers type=domain";
2612         $ret = system($cmd);
2613         if ($ret != 0) {
2614                 print("\"$cmd\" failed\n");
2615                 return 1;
2616         }
2617
2618         $cmd = $netcmd . "groupmap delete ntgroup=domadmins";
2619         $ret = system($cmd);
2620
2621         $cmd = $netcmd . "groupmap add rid=512 unixgroup=domadmins type=domain";
2622         $ret = system($cmd);
2623         if ($ret != 0) {
2624                 print("\"$cmd\" failed\n");
2625                 return 1;
2626         }
2627
2628         $cmd = $netcmd . "groupmap delete ntgroup=everyone";
2629         $ret = system($cmd);
2630
2631         $cmd = $netcmd . "groupmap add sid=S-1-1-0 unixgroup=everyone type=builtin";
2632         $ret = system($cmd);
2633         if ($ret != 0) {
2634                 print("\"$cmd\" failed\n");
2635                 return 1;
2636         }
2637
2638         # note: creating builtin groups requires winbindd for the
2639         # unix id allocator
2640         my $create_builtin_users = "no";
2641         if ($winbindd eq "yes") {
2642                 $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2643                 $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2644                 $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2645                 $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2646                 my $wbinfo_out = qx($cmd 2>&1);
2647                 if ($? != 0) {
2648                         # wbinfo doesn't give us a better error code then
2649                         # WBC_ERR_DOMAIN_NOT_FOUND, but at least that's
2650                         # different then WBC_ERR_WINBIND_NOT_AVAILABLE
2651                         if ($wbinfo_out !~ /WBC_ERR_DOMAIN_NOT_FOUND/) {
2652                                 print("Failed to run \"wbinfo --sid-to-gid=S-1-5-32-545\": $wbinfo_out");
2653                                 teardown_env($self, $envvars);
2654                                 return 0;
2655                         }
2656                         $create_builtin_users = "yes";
2657                 }
2658         }
2659         if ($create_builtin_users eq "yes") {
2660             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2661             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2662             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2663             $cmd .= Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2664             $cmd .= "sam createbuiltingroup Users";
2665             $ret = system($cmd);
2666             if ($ret != 0) {
2667                 print "Failed to create BUILTIN\\Users group\n";
2668                 teardown_env($self, $envvars);
2669                 return 0;
2670             }
2671
2672             $cmd = Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} ";
2673             $cmd .= "cache del IDMAP/SID2XID/S-1-5-32-545";
2674             system($cmd);
2675
2676             $cmd = "SELFTEST_WINBINDD_SOCKET_DIR='$envvars->{SELFTEST_WINBINDD_SOCKET_DIR}' ";
2677             $cmd .= "NSS_WRAPPER_PASSWD='$envvars->{NSS_WRAPPER_PASSWD}' ";
2678             $cmd .= "NSS_WRAPPER_GROUP='$envvars->{NSS_WRAPPER_GROUP}' ";
2679             $cmd .= Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545";
2680             $ret = system($cmd);
2681             if ($ret != 0) {
2682                 print "Missing \"BUILTIN\\Users\", did net sam createbuiltingroup Users fail?\n";
2683                 teardown_env($self, $envvars);
2684                 return 0;
2685             }
2686         }
2687
2688         print $self->getlog_env($envvars);
2689
2690         return 1;
2691 }
2692
2693 1;