Documentation: embargoed-hardware-issues.rst: Add myself for Power

[sfrench/cifs-2.6.git] / drivers / scsi / lpfc / lpfc_init.c

/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term *
 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
 * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.broadcom.com                                                *
 * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/

#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/sched/clock.h>
#include <linux/ctype.h>
#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/miscdevice.h>
#include <linux/percpu.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <linux/crash_dump.h>
#include <linux/cpu.h>
#include <linux/cpuhotplug.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_tcq.h>
#include <scsi/fc/fc_fs.h>

#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_scsi.h"
#include "lpfc_nvme.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"
#include "lpfc_ids.h"

static enum cpuhp_state lpfc_cpuhp_state;
/* Used when mapping IRQ vectors in a driver centric manner */
static uint32_t lpfc_present_cpu;
static bool lpfc_pldv_detect;

static void __lpfc_cpuhp_remove(struct lpfc_hba *phba);
static void lpfc_cpuhp_remove(struct lpfc_hba *phba);
static void lpfc_cpuhp_add(struct lpfc_hba *phba);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
static int lpfc_sli4_queue_verify(struct lpfc_hba *);
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
static void lpfc_free_els_sgl_list(struct lpfc_hba *);
static void lpfc_free_nvmet_sgl_list(struct lpfc_hba *);
static void lpfc_init_sgl_list(struct lpfc_hba *);
static int lpfc_init_active_sgl_array(struct lpfc_hba *);
static void lpfc_free_active_sgl(struct lpfc_hba *);
static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
static void lpfc_sli4_disable_intr(struct lpfc_hba *);
static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t);
static void lpfc_sli4_oas_verify(struct lpfc_hba *phba);
static uint16_t lpfc_find_cpu_handle(struct lpfc_hba *, uint16_t, int);
static void lpfc_setup_bg(struct lpfc_hba *, struct Scsi_Host *);
static int lpfc_sli4_cgn_parm_chg_evt(struct lpfc_hba *);
static void lpfc_sli4_async_cmstat_evt(struct lpfc_hba *phba);
static void lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba);

static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);
#define LPFC_NVMET_BUF_POST 254
static int lpfc_vmid_res_alloc(struct lpfc_hba *phba, struct lpfc_vport *vport);
static void lpfc_cgn_update_tstamp(struct lpfc_hba *phba, struct lpfc_cgn_ts *ts);

/**
 * lpfc_config_port_prep - Perform lpfc initialization prior to config port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization prior to issuing the CONFIG_PORT
 * mailbox command. It retrieves the revision information from the HBA and
 * collects the Vital Product Data (VPD) about the HBA for preparing the
 * configuration of the HBA.
 *
 * Return codes:
 *   0 - success.
 *   -ERESTART - requests the SLI layer to reset the HBA and try again.
 *   Any other value - indicates an error.
 **/
int
lpfc_config_port_prep(struct lpfc_hba *phba)
{
        lpfc_vpd_t *vp = &phba->vpd;
        int i = 0, rc;
        LPFC_MBOXQ_t *pmb;
        MAILBOX_t *mb;
        char *lpfc_vpd_data = NULL;
        uint16_t offset = 0;
        static char licensed[56] =
                    "key unlock for use with gnu public licensed code only\0";
        static int init_key = 1;

        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }

        mb = &pmb->u.mb;
        phba->link_state = LPFC_INIT_MBX_CMDS;

        if (lpfc_is_LC_HBA(phba->pcidev->device)) {
                if (init_key) {
                        uint32_t *ptext = (uint32_t *) licensed;

                        for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
                                *ptext = cpu_to_be32(*ptext);
                        init_key = 0;
                }

                lpfc_read_nv(phba, pmb);
                memset((char*)mb->un.varRDnvp.rsvd3, 0,
                        sizeof (mb->un.varRDnvp.rsvd3));
                memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
                         sizeof (licensed));

                rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0324 Config Port initialization "
                                        "error, mbxCmd x%x READ_NVPARM, "
                                        "mbxStatus x%x\n",
                                        mb->mbxCommand, mb->mbxStatus);
                        mempool_free(pmb, phba->mbox_mem_pool);
                        return -ERESTART;
                }
                memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
                       sizeof(phba->wwnn));
                memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname,
                       sizeof(phba->wwpn));
        }

        /*
         * Clear all option bits except LPFC_SLI3_BG_ENABLED,
         * which was already set in lpfc_get_cfgparam()
         */
        phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;

        /* Setup and issue mailbox READ REV command */
        lpfc_read_rev(phba, pmb);
        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
        if (rc != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0439 Adapter failed to init, mbxCmd x%x "
                                "READ_REV, mbxStatus x%x\n",
                                mb->mbxCommand, mb->mbxStatus);
                mempool_free( pmb, phba->mbox_mem_pool);
                return -ERESTART;
        }


        /*
         * The value of rr must be 1 since the driver set the cv field to 1.
         * This setting requires the FW to set all revision fields.
         */
        if (mb->un.varRdRev.rr == 0) {
                vp->rev.rBit = 0;
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0440 Adapter failed to init, READ_REV has "
                                "missing revision information.\n");
                mempool_free(pmb, phba->mbox_mem_pool);
                return -ERESTART;
        }

        if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) {
                mempool_free(pmb, phba->mbox_mem_pool);
                return -EINVAL;
        }

        /* Save information as VPD data */
        vp->rev.rBit = 1;
        memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t));
        vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
        memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
        vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
        memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
        vp->rev.biuRev = mb->un.varRdRev.biuRev;
        vp->rev.smRev = mb->un.varRdRev.smRev;
        vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
        vp->rev.endecRev = mb->un.varRdRev.endecRev;
        vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
        vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
        vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
        vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
        vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
        vp->rev.opFwRev = mb->un.varRdRev.opFwRev;

        /* If the sli feature level is less then 9, we must
         * tear down all RPIs and VPIs on link down if NPIV
         * is enabled.
         */
        if (vp->rev.feaLevelHigh < 9)
                phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN;

        if (lpfc_is_LC_HBA(phba->pcidev->device))
                memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
                                                sizeof (phba->RandomData));

        /* Get adapter VPD information */
        lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
        if (!lpfc_vpd_data)
                goto out_free_mbox;
        do {
                lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD);
                rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);

                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "0441 VPD not present on adapter, "
                                        "mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
                                        mb->mbxCommand, mb->mbxStatus);
                        mb->un.varDmp.word_cnt = 0;
                }
                /* dump mem may return a zero when finished or we got a
                 * mailbox error, either way we are done.
                 */
                if (mb->un.varDmp.word_cnt == 0)
                        break;

                if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
                        mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
                lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
                                      lpfc_vpd_data + offset,
                                      mb->un.varDmp.word_cnt);
                offset += mb->un.varDmp.word_cnt;
        } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE);

        lpfc_parse_vpd(phba, lpfc_vpd_data, offset);

        kfree(lpfc_vpd_data);
out_free_mbox:
        mempool_free(pmb, phba->mbox_mem_pool);
        return 0;
}

/**
 * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for driver's configuring asynchronous event
 * mailbox command to the device. If the mailbox command returns successfully,
 * it will set internal async event support flag to 1; otherwise, it will
 * set internal async event support flag to 0.
 **/
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
        if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
                phba->temp_sensor_support = 1;
        else
                phba->temp_sensor_support = 0;
        mempool_free(pmboxq, phba->mbox_mem_pool);
        return;
}

/**
 * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the completion handler for dump mailbox command for getting
 * wake up parameters. When this command complete, the response contain
 * Option rom version of the HBA. This function translate the version number
 * into a human readable string and store it in OptionROMVersion.
 **/
static void
lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
        struct prog_id *prg;
        uint32_t prog_id_word;
        char dist = ' ';
        /* character array used for decoding dist type. */
        char dist_char[] = "nabx";

        if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
                mempool_free(pmboxq, phba->mbox_mem_pool);
                return;
        }

        prg = (struct prog_id *) &prog_id_word;

        /* word 7 contain option rom version */
        prog_id_word = pmboxq->u.mb.un.varWords[7];

        /* Decode the Option rom version word to a readable string */
        dist = dist_char[prg->dist];

        if ((prg->dist == 3) && (prg->num == 0))
                snprintf(phba->OptionROMVersion, 32, "%d.%d%d",
                        prg->ver, prg->rev, prg->lev);
        else
                snprintf(phba->OptionROMVersion, 32, "%d.%d%d%c%d",
                        prg->ver, prg->rev, prg->lev,
                        dist, prg->num);
        mempool_free(pmboxq, phba->mbox_mem_pool);
        return;
}

/**
 * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname,
 * @vport: pointer to lpfc vport data structure.
 *
 *
 * Return codes
 *   None.
 **/
void
lpfc_update_vport_wwn(struct lpfc_vport *vport)
{
        struct lpfc_hba *phba = vport->phba;

        /*
         * If the name is empty or there exists a soft name
         * then copy the service params name, otherwise use the fc name
         */
        if (vport->fc_nodename.u.wwn[0] == 0)
                memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
                        sizeof(struct lpfc_name));
        else
                memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename,
                        sizeof(struct lpfc_name));

        /*
         * If the port name has changed, then set the Param changes flag
         * to unreg the login
         */
        if (vport->fc_portname.u.wwn[0] != 0 &&
                memcmp(&vport->fc_portname, &vport->fc_sparam.portName,
                       sizeof(struct lpfc_name))) {
                vport->vport_flag |= FAWWPN_PARAM_CHG;

                if (phba->sli_rev == LPFC_SLI_REV4 &&
                    vport->port_type == LPFC_PHYSICAL_PORT &&
                    phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_FABRIC) {
                        if (!(phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG))
                                phba->sli4_hba.fawwpn_flag &=
                                                ~LPFC_FAWWPN_FABRIC;
                        lpfc_printf_log(phba, KERN_INFO,
                                        LOG_SLI | LOG_DISCOVERY | LOG_ELS,
                                        "2701 FA-PWWN change WWPN from %llx to "
                                        "%llx: vflag x%x fawwpn_flag x%x\n",
                                        wwn_to_u64(vport->fc_portname.u.wwn),
                                        wwn_to_u64
                                           (vport->fc_sparam.portName.u.wwn),
                                        vport->vport_flag,
                                        phba->sli4_hba.fawwpn_flag);
                        memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
                               sizeof(struct lpfc_name));
                }
        }

        if (vport->fc_portname.u.wwn[0] == 0)
                memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
                       sizeof(struct lpfc_name));
        else
                memcpy(&vport->fc_sparam.portName, &vport->fc_portname,
                       sizeof(struct lpfc_name));
}

/**
 * lpfc_config_port_post - Perform lpfc initialization after config port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will do LPFC initialization after the CONFIG_PORT mailbox
 * command call. It performs all internal resource and state setups on the
 * port: post IOCB buffers, enable appropriate host interrupt attentions,
 * ELS ring timers, etc.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_config_port_post(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport = phba->pport;
        struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
        LPFC_MBOXQ_t *pmb;
        MAILBOX_t *mb;
        struct lpfc_dmabuf *mp;
        struct lpfc_sli *psli = &phba->sli;
        uint32_t status, timeout;
        int i, j;
        int rc;

        spin_lock_irq(&phba->hbalock);
        /*
         * If the Config port completed correctly the HBA is not
         * over heated any more.
         */
        if (phba->over_temp_state == HBA_OVER_TEMP)
                phba->over_temp_state = HBA_NORMAL_TEMP;
        spin_unlock_irq(&phba->hbalock);

        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }
        mb = &pmb->u.mb;

        /* Get login parameters for NID.  */
        rc = lpfc_read_sparam(phba, pmb, 0);
        if (rc) {
                mempool_free(pmb, phba->mbox_mem_pool);
                return -ENOMEM;
        }

        pmb->vport = vport;
        if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0448 Adapter failed init, mbxCmd x%x "
                                "READ_SPARM mbxStatus x%x\n",
                                mb->mbxCommand, mb->mbxStatus);
                phba->link_state = LPFC_HBA_ERROR;
                lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
                return -EIO;
        }

        mp = (struct lpfc_dmabuf *)pmb->ctx_buf;

        /* This dmabuf was allocated by lpfc_read_sparam. The dmabuf is no
         * longer needed.  Prevent unintended ctx_buf access as the mbox is
         * reused.
         */
        memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
        lpfc_mbuf_free(phba, mp->virt, mp->phys);
        kfree(mp);
        pmb->ctx_buf = NULL;
        lpfc_update_vport_wwn(vport);

        /* Update the fc_host data structures with new wwn. */
        fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
        fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
        fc_host_max_npiv_vports(shost) = phba->max_vpi;

        /* If no serial number in VPD data, use low 6 bytes of WWNN */
        /* This should be consolidated into parse_vpd ? - mr */
        if (phba->SerialNumber[0] == 0) {
                uint8_t *outptr;

                outptr = &vport->fc_nodename.u.s.IEEE[0];
                for (i = 0; i < 12; i++) {
                        status = *outptr++;
                        j = ((status & 0xf0) >> 4);
                        if (j <= 9)
                                phba->SerialNumber[i] =
                                    (char)((uint8_t) 0x30 + (uint8_t) j);
                        else
                                phba->SerialNumber[i] =
                                    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
                        i++;
                        j = (status & 0xf);
                        if (j <= 9)
                                phba->SerialNumber[i] =
                                    (char)((uint8_t) 0x30 + (uint8_t) j);
                        else
                                phba->SerialNumber[i] =
                                    (char)((uint8_t) 0x61 + (uint8_t) (j - 10));
                }
        }

        lpfc_read_config(phba, pmb);
        pmb->vport = vport;
        if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0453 Adapter failed to init, mbxCmd x%x "
                                "READ_CONFIG, mbxStatus x%x\n",
                                mb->mbxCommand, mb->mbxStatus);
                phba->link_state = LPFC_HBA_ERROR;
                mempool_free( pmb, phba->mbox_mem_pool);
                return -EIO;
        }

        /* Check if the port is disabled */
        lpfc_sli_read_link_ste(phba);

        /* Reset the DFT_HBA_Q_DEPTH to the max xri  */
        if (phba->cfg_hba_queue_depth > mb->un.varRdConfig.max_xri) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "3359 HBA queue depth changed from %d to %d\n",
                                phba->cfg_hba_queue_depth,
                                mb->un.varRdConfig.max_xri);
                phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri;
        }

        phba->lmt = mb->un.varRdConfig.lmt;

        /* Get the default values for Model Name and Description */
        lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

        phba->link_state = LPFC_LINK_DOWN;

        /* Only process IOCBs on ELS ring till hba_state is READY */
        if (psli->sli3_ring[LPFC_EXTRA_RING].sli.sli3.cmdringaddr)
                psli->sli3_ring[LPFC_EXTRA_RING].flag |= LPFC_STOP_IOCB_EVENT;
        if (psli->sli3_ring[LPFC_FCP_RING].sli.sli3.cmdringaddr)
                psli->sli3_ring[LPFC_FCP_RING].flag |= LPFC_STOP_IOCB_EVENT;

        /* Post receive buffers for desired rings */
        if (phba->sli_rev != 3)
                lpfc_post_rcv_buf(phba);

        /*
         * Configure HBA MSI-X attention conditions to messages if MSI-X mode
         */
        if (phba->intr_type == MSIX) {
                rc = lpfc_config_msi(phba, pmb);
                if (rc) {
                        mempool_free(pmb, phba->mbox_mem_pool);
                        return -EIO;
                }
                rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0352 Config MSI mailbox command "
                                        "failed, mbxCmd x%x, mbxStatus x%x\n",
                                        pmb->u.mb.mbxCommand,
                                        pmb->u.mb.mbxStatus);
                        mempool_free(pmb, phba->mbox_mem_pool);
                        return -EIO;
                }
        }

        spin_lock_irq(&phba->hbalock);
        /* Initialize ERATT handling flag */
        phba->hba_flag &= ~HBA_ERATT_HANDLED;

        /* Enable appropriate host interrupts */
        if (lpfc_readl(phba->HCregaddr, &status)) {
                spin_unlock_irq(&phba->hbalock);
                return -EIO;
        }
        status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
        if (psli->num_rings > 0)
                status |= HC_R0INT_ENA;
        if (psli->num_rings > 1)
                status |= HC_R1INT_ENA;
        if (psli->num_rings > 2)
                status |= HC_R2INT_ENA;
        if (psli->num_rings > 3)
                status |= HC_R3INT_ENA;

        if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
            (phba->cfg_poll & DISABLE_FCP_RING_INT))
                status &= ~(HC_R0INT_ENA);

        writel(status, phba->HCregaddr);
        readl(phba->HCregaddr); /* flush */
        spin_unlock_irq(&phba->hbalock);

        /* Set up ring-0 (ELS) timer */
        timeout = phba->fc_ratov * 2;
        mod_timer(&vport->els_tmofunc,
                  jiffies + msecs_to_jiffies(1000 * timeout));
        /* Set up heart beat (HB) timer */
        mod_timer(&phba->hb_tmofunc,
                  jiffies + msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
        phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO);
        phba->last_completion_time = jiffies;
        /* Set up error attention (ERATT) polling timer */
        mod_timer(&phba->eratt_poll,
                  jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));

        if (phba->hba_flag & LINK_DISABLED) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2598 Adapter Link is disabled.\n");
                lpfc_down_link(phba, pmb);
                pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
                rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
                if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2599 Adapter failed to issue DOWN_LINK"
                                        " mbox command rc 0x%x\n", rc);

                        mempool_free(pmb, phba->mbox_mem_pool);
                        return -EIO;
                }
        } else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
                mempool_free(pmb, phba->mbox_mem_pool);
                rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
                if (rc)
                        return rc;
        }
        /* MBOX buffer will be freed in mbox compl */
        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }

        lpfc_config_async(phba, pmb, LPFC_ELS_RING);
        pmb->mbox_cmpl = lpfc_config_async_cmpl;
        pmb->vport = phba->pport;
        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

        if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0456 Adapter failed to issue "
                                "ASYNCEVT_ENABLE mbox status x%x\n",
                                rc);
                mempool_free(pmb, phba->mbox_mem_pool);
        }

        /* Get Option rom version */
        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }

        lpfc_dump_wakeup_param(phba, pmb);
        pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl;
        pmb->vport = phba->pport;
        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);

        if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0435 Adapter failed "
                                "to get Option ROM version status x%x\n", rc);
                mempool_free(pmb, phba->mbox_mem_pool);
        }

        return 0;
}

/**
 * lpfc_sli4_refresh_params - update driver copy of params.
 * @phba: Pointer to HBA context object.
 *
 * This is called to refresh driver copy of dynamic fields from the
 * common_get_sli4_parameters descriptor.
 **/
int
lpfc_sli4_refresh_params(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *mboxq;
        struct lpfc_mqe *mqe;
        struct lpfc_sli4_parameters *mbx_sli4_parameters;
        int length, rc;

        mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!mboxq)
                return -ENOMEM;

        mqe = &mboxq->u.mqe;
        /* Read the port's SLI4 Config Parameters */
        length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
                  sizeof(struct lpfc_sli4_cfg_mhdr));
        lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
                         LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS,
                         length, LPFC_SLI4_MBX_EMBED);

        rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
        if (unlikely(rc)) {
                mempool_free(mboxq, phba->mbox_mem_pool);
                return rc;
        }
        mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
        phba->sli4_hba.pc_sli4_params.mi_cap =
                bf_get(cfg_mi_ver, mbx_sli4_parameters);

        /* Are we forcing MI off via module parameter? */
        if (phba->cfg_enable_mi)
                phba->sli4_hba.pc_sli4_params.mi_ver =
                        bf_get(cfg_mi_ver, mbx_sli4_parameters);
        else
                phba->sli4_hba.pc_sli4_params.mi_ver = 0;

        phba->sli4_hba.pc_sli4_params.cmf =
                        bf_get(cfg_cmf, mbx_sli4_parameters);
        phba->sli4_hba.pc_sli4_params.pls =
                        bf_get(cfg_pvl, mbx_sli4_parameters);

        mempool_free(mboxq, phba->mbox_mem_pool);
        return rc;
}

/**
 * lpfc_hba_init_link - Initialize the FC link
 * @phba: pointer to lpfc hba data structure.
 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
 *
 * This routine will issue the INIT_LINK mailbox command call.
 * It is available to other drivers through the lpfc_hba data
 * structure for use as a delayed link up mechanism with the
 * module parameter lpfc_suppress_link_up.
 *
 * Return code
 *              0 - success
 *              Any other value - error
 **/
static int
lpfc_hba_init_link(struct lpfc_hba *phba, uint32_t flag)
{
        return lpfc_hba_init_link_fc_topology(phba, phba->cfg_topology, flag);
}

/**
 * lpfc_hba_init_link_fc_topology - Initialize FC link with desired topology
 * @phba: pointer to lpfc hba data structure.
 * @fc_topology: desired fc topology.
 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
 *
 * This routine will issue the INIT_LINK mailbox command call.
 * It is available to other drivers through the lpfc_hba data
 * structure for use as a delayed link up mechanism with the
 * module parameter lpfc_suppress_link_up.
 *
 * Return code
 *              0 - success
 *              Any other value - error
 **/
int
lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology,
                               uint32_t flag)
{
        struct lpfc_vport *vport = phba->pport;
        LPFC_MBOXQ_t *pmb;
        MAILBOX_t *mb;
        int rc;

        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }
        mb = &pmb->u.mb;
        pmb->vport = vport;

        if ((phba->cfg_link_speed > LPFC_USER_LINK_SPEED_MAX) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_1G) &&
             !(phba->lmt & LMT_1Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_2G) &&
             !(phba->lmt & LMT_2Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_4G) &&
             !(phba->lmt & LMT_4Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_8G) &&
             !(phba->lmt & LMT_8Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G) &&
             !(phba->lmt & LMT_10Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) &&
             !(phba->lmt & LMT_16Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) &&
             !(phba->lmt & LMT_32Gb)) ||
            ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_64G) &&
             !(phba->lmt & LMT_64Gb))) {
                /* Reset link speed to auto */
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1302 Invalid speed for this board:%d "
                                "Reset link speed to auto.\n",
                                phba->cfg_link_speed);
                        phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
        }
        lpfc_init_link(phba, pmb, fc_topology, phba->cfg_link_speed);
        pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
        if (phba->sli_rev < LPFC_SLI_REV4)
                lpfc_set_loopback_flag(phba);
        rc = lpfc_sli_issue_mbox(phba, pmb, flag);
        if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0498 Adapter failed to init, mbxCmd x%x "
                                "INIT_LINK, mbxStatus x%x\n",
                                mb->mbxCommand, mb->mbxStatus);
                if (phba->sli_rev <= LPFC_SLI_REV3) {
                        /* Clear all interrupt enable conditions */
                        writel(0, phba->HCregaddr);
                        readl(phba->HCregaddr); /* flush */
                        /* Clear all pending interrupts */
                        writel(0xffffffff, phba->HAregaddr);
                        readl(phba->HAregaddr); /* flush */
                }
                phba->link_state = LPFC_HBA_ERROR;
                if (rc != MBX_BUSY || flag == MBX_POLL)
                        mempool_free(pmb, phba->mbox_mem_pool);
                return -EIO;
        }
        phba->cfg_suppress_link_up = LPFC_INITIALIZE_LINK;
        if (flag == MBX_POLL)
                mempool_free(pmb, phba->mbox_mem_pool);

        return 0;
}

/**
 * lpfc_hba_down_link - this routine downs the FC link
 * @phba: pointer to lpfc hba data structure.
 * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT
 *
 * This routine will issue the DOWN_LINK mailbox command call.
 * It is available to other drivers through the lpfc_hba data
 * structure for use to stop the link.
 *
 * Return code
 *              0 - success
 *              Any other value - error
 **/
static int
lpfc_hba_down_link(struct lpfc_hba *phba, uint32_t flag)
{
        LPFC_MBOXQ_t *pmb;
        int rc;

        pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                phba->link_state = LPFC_HBA_ERROR;
                return -ENOMEM;
        }

        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "0491 Adapter Link is disabled.\n");
        lpfc_down_link(phba, pmb);
        pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
        rc = lpfc_sli_issue_mbox(phba, pmb, flag);
        if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2522 Adapter failed to issue DOWN_LINK"
                                " mbox command rc 0x%x\n", rc);

                mempool_free(pmb, phba->mbox_mem_pool);
                return -EIO;
        }
        if (flag == MBX_POLL)
                mempool_free(pmb, phba->mbox_mem_pool);

        return 0;
}

/**
 * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do LPFC uninitialization before the HBA is reset when
 * bringing down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_hba_down_prep(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        int i;

        if (phba->sli_rev <= LPFC_SLI_REV3) {
                /* Disable interrupts */
                writel(0, phba->HCregaddr);
                readl(phba->HCregaddr); /* flush */
        }

        if (test_bit(FC_UNLOADING, &phba->pport->load_flag))
                lpfc_cleanup_discovery_resources(phba->pport);
        else {
                vports = lpfc_create_vport_work_array(phba);
                if (vports != NULL)
                        for (i = 0; i <= phba->max_vports &&
                                vports[i] != NULL; i++)
                                lpfc_cleanup_discovery_resources(vports[i]);
                lpfc_destroy_vport_work_array(phba, vports);
        }
        return 0;
}

/**
 * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free
 * rspiocb which got deferred
 *
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will cleanup completed slow path events after HBA is reset
 * when bringing down the SLI Layer.
 *
 *
 * Return codes
 *   void.
 **/
static void
lpfc_sli4_free_sp_events(struct lpfc_hba *phba)
{
        struct lpfc_iocbq *rspiocbq;
        struct hbq_dmabuf *dmabuf;
        struct lpfc_cq_event *cq_event;

        spin_lock_irq(&phba->hbalock);
        phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
        spin_unlock_irq(&phba->hbalock);

        while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
                /* Get the response iocb from the head of work queue */
                spin_lock_irq(&phba->hbalock);
                list_remove_head(&phba->sli4_hba.sp_queue_event,
                                 cq_event, struct lpfc_cq_event, list);
                spin_unlock_irq(&phba->hbalock);

                switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
                case CQE_CODE_COMPL_WQE:
                        rspiocbq = container_of(cq_event, struct lpfc_iocbq,
                                                 cq_event);
                        lpfc_sli_release_iocbq(phba, rspiocbq);
                        break;
                case CQE_CODE_RECEIVE:
                case CQE_CODE_RECEIVE_V1:
                        dmabuf = container_of(cq_event, struct hbq_dmabuf,
                                              cq_event);
                        lpfc_in_buf_free(phba, &dmabuf->dbuf);
                }
        }
}

/**
 * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will cleanup posted ELS buffers after the HBA is reset
 * when bringing down the SLI Layer.
 *
 *
 * Return codes
 *   void.
 **/
static void
lpfc_hba_free_post_buf(struct lpfc_hba *phba)
{
        struct lpfc_sli *psli = &phba->sli;
        struct lpfc_sli_ring *pring;
        struct lpfc_dmabuf *mp, *next_mp;
        LIST_HEAD(buflist);
        int count;

        if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)
                lpfc_sli_hbqbuf_free_all(phba);
        else {
                /* Cleanup preposted buffers on the ELS ring */
                pring = &psli->sli3_ring[LPFC_ELS_RING];
                spin_lock_irq(&phba->hbalock);
                list_splice_init(&pring->postbufq, &buflist);
                spin_unlock_irq(&phba->hbalock);

                count = 0;
                list_for_each_entry_safe(mp, next_mp, &buflist, list) {
                        list_del(&mp->list);
                        count++;
                        lpfc_mbuf_free(phba, mp->virt, mp->phys);
                        kfree(mp);
                }

                spin_lock_irq(&phba->hbalock);
                pring->postbufq_cnt -= count;
                spin_unlock_irq(&phba->hbalock);
        }
}

/**
 * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will cleanup the txcmplq after the HBA is reset when bringing
 * down the SLI Layer.
 *
 * Return codes
 *   void
 **/
static void
lpfc_hba_clean_txcmplq(struct lpfc_hba *phba)
{
        struct lpfc_sli *psli = &phba->sli;
        struct lpfc_queue *qp = NULL;
        struct lpfc_sli_ring *pring;
        LIST_HEAD(completions);
        int i;
        struct lpfc_iocbq *piocb, *next_iocb;

        if (phba->sli_rev != LPFC_SLI_REV4) {
                for (i = 0; i < psli->num_rings; i++) {
                        pring = &psli->sli3_ring[i];
                        spin_lock_irq(&phba->hbalock);
                        /* At this point in time the HBA is either reset or DOA
                         * Nothing should be on txcmplq as it will
                         * NEVER complete.
                         */
                        list_splice_init(&pring->txcmplq, &completions);
                        pring->txcmplq_cnt = 0;
                        spin_unlock_irq(&phba->hbalock);

                        lpfc_sli_abort_iocb_ring(phba, pring);
                }
                /* Cancel all the IOCBs from the completions list */
                lpfc_sli_cancel_iocbs(phba, &completions,
                                      IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED);
                return;
        }
        list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
                pring = qp->pring;
                if (!pring)
                        continue;
                spin_lock_irq(&pring->ring_lock);
                list_for_each_entry_safe(piocb, next_iocb,
                                         &pring->txcmplq, list)
                        piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
                list_splice_init(&pring->txcmplq, &completions);
                pring->txcmplq_cnt = 0;
                spin_unlock_irq(&pring->ring_lock);
                lpfc_sli_abort_iocb_ring(phba, pring);
        }
        /* Cancel all the IOCBs from the completions list */
        lpfc_sli_cancel_iocbs(phba, &completions,
                              IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED);
}

/**
 * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do uninitialization after the HBA is reset when bring
 * down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
static int
lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
        lpfc_hba_free_post_buf(phba);
        lpfc_hba_clean_txcmplq(phba);
        return 0;
}

/**
 * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine will do uninitialization after the HBA is reset when bring
 * down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
static int
lpfc_hba_down_post_s4(struct lpfc_hba *phba)
{
        struct lpfc_io_buf *psb, *psb_next;
        struct lpfc_async_xchg_ctx *ctxp, *ctxp_next;
        struct lpfc_sli4_hdw_queue *qp;
        LIST_HEAD(aborts);
        LIST_HEAD(nvme_aborts);
        LIST_HEAD(nvmet_aborts);
        struct lpfc_sglq *sglq_entry = NULL;
        int cnt, idx;


        lpfc_sli_hbqbuf_free_all(phba);
        lpfc_hba_clean_txcmplq(phba);

        /* At this point in time the HBA is either reset or DOA. Either
         * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
         * on the lpfc_els_sgl_list so that it can either be freed if the
         * driver is unloading or reposted if the driver is restarting
         * the port.
         */

        /* sgl_list_lock required because worker thread uses this
         * list.
         */
        spin_lock_irq(&phba->sli4_hba.sgl_list_lock);
        list_for_each_entry(sglq_entry,
                &phba->sli4_hba.lpfc_abts_els_sgl_list, list)
                sglq_entry->state = SGL_FREED;

        list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
                        &phba->sli4_hba.lpfc_els_sgl_list);


        spin_unlock_irq(&phba->sli4_hba.sgl_list_lock);

        /* abts_xxxx_buf_list_lock required because worker thread uses this
         * list.
         */
        spin_lock_irq(&phba->hbalock);
        cnt = 0;
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                qp = &phba->sli4_hba.hdwq[idx];

                spin_lock(&qp->abts_io_buf_list_lock);
                list_splice_init(&qp->lpfc_abts_io_buf_list,
                                 &aborts);

                list_for_each_entry_safe(psb, psb_next, &aborts, list) {
                        psb->pCmd = NULL;
                        psb->status = IOSTAT_SUCCESS;
                        cnt++;
                }
                spin_lock(&qp->io_buf_list_put_lock);
                list_splice_init(&aborts, &qp->lpfc_io_buf_list_put);
                qp->put_io_bufs += qp->abts_scsi_io_bufs;
                qp->put_io_bufs += qp->abts_nvme_io_bufs;
                qp->abts_scsi_io_bufs = 0;
                qp->abts_nvme_io_bufs = 0;
                spin_unlock(&qp->io_buf_list_put_lock);
                spin_unlock(&qp->abts_io_buf_list_lock);
        }
        spin_unlock_irq(&phba->hbalock);

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                spin_lock_irq(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                list_splice_init(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
                                 &nvmet_aborts);
                spin_unlock_irq(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                list_for_each_entry_safe(ctxp, ctxp_next, &nvmet_aborts, list) {
                        ctxp->flag &= ~(LPFC_NVME_XBUSY | LPFC_NVME_ABORT_OP);
                        lpfc_nvmet_ctxbuf_post(phba, ctxp->ctxbuf);
                }
        }

        lpfc_sli4_free_sp_events(phba);
        return cnt;
}

/**
 * lpfc_hba_down_post - Wrapper func for hba down post routine
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine wraps the actual SLI3 or SLI4 routine for performing
 * uninitialization after the HBA is reset when bring down the SLI Layer.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
int
lpfc_hba_down_post(struct lpfc_hba *phba)
{
        return (*phba->lpfc_hba_down_post)(phba);
}

/**
 * lpfc_hb_timeout - The HBA-timer timeout handler
 * @t: timer context used to obtain the pointer to lpfc hba data structure.
 *
 * This is the HBA-timer timeout handler registered to the lpfc driver. When
 * this timer fires, a HBA timeout event shall be posted to the lpfc driver
 * work-port-events bitmap and the worker thread is notified. This timeout
 * event will be used by the worker thread to invoke the actual timeout
 * handler routine, lpfc_hb_timeout_handler. Any periodical operations will
 * be performed in the timeout handler and the HBA timeout event bit shall
 * be cleared by the worker thread after it has taken the event bitmap out.
 **/
static void
lpfc_hb_timeout(struct timer_list *t)
{
        struct lpfc_hba *phba;
        uint32_t tmo_posted;
        unsigned long iflag;

        phba = from_timer(phba, t, hb_tmofunc);

        /* Check for heart beat timeout conditions */
        spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
        tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO;
        if (!tmo_posted)
                phba->pport->work_port_events |= WORKER_HB_TMO;
        spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);

        /* Tell the worker thread there is work to do */
        if (!tmo_posted)
                lpfc_worker_wake_up(phba);
        return;
}

/**
 * lpfc_rrq_timeout - The RRQ-timer timeout handler
 * @t: timer context used to obtain the pointer to lpfc hba data structure.
 *
 * This is the RRQ-timer timeout handler registered to the lpfc driver. When
 * this timer fires, a RRQ timeout event shall be posted to the lpfc driver
 * work-port-events bitmap and the worker thread is notified. This timeout
 * event will be used by the worker thread to invoke the actual timeout
 * handler routine, lpfc_rrq_handler. Any periodical operations will
 * be performed in the timeout handler and the RRQ timeout event bit shall
 * be cleared by the worker thread after it has taken the event bitmap out.
 **/
static void
lpfc_rrq_timeout(struct timer_list *t)
{
        struct lpfc_hba *phba;
        unsigned long iflag;

        phba = from_timer(phba, t, rrq_tmr);
        spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
        if (!test_bit(FC_UNLOADING, &phba->pport->load_flag))
                phba->hba_flag |= HBA_RRQ_ACTIVE;
        else
                phba->hba_flag &= ~HBA_RRQ_ACTIVE;
        spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);

        if (!test_bit(FC_UNLOADING, &phba->pport->load_flag))
                lpfc_worker_wake_up(phba);
}

/**
 * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
 * @phba: pointer to lpfc hba data structure.
 * @pmboxq: pointer to the driver internal queue element for mailbox command.
 *
 * This is the callback function to the lpfc heart-beat mailbox command.
 * If configured, the lpfc driver issues the heart-beat mailbox command to
 * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the
 * heart-beat mailbox command is issued, the driver shall set up heart-beat
 * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks
 * heart-beat outstanding state. Once the mailbox command comes back and
 * no error conditions detected, the heart-beat mailbox command timer is
 * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding
 * state is cleared for the next heart-beat. If the timer expired with the
 * heart-beat outstanding state set, the driver will put the HBA offline.
 **/
static void
lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
        unsigned long drvr_flag;

        spin_lock_irqsave(&phba->hbalock, drvr_flag);
        phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO);
        spin_unlock_irqrestore(&phba->hbalock, drvr_flag);

        /* Check and reset heart-beat timer if necessary */
        mempool_free(pmboxq, phba->mbox_mem_pool);
        if (!test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag) &&
            !(phba->link_state == LPFC_HBA_ERROR) &&
            !test_bit(FC_UNLOADING, &phba->pport->load_flag))
                mod_timer(&phba->hb_tmofunc,
                          jiffies +
                          msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
        return;
}

/*
 * lpfc_idle_stat_delay_work - idle_stat tracking
 *
 * This routine tracks per-eq idle_stat and determines polling decisions.
 *
 * Return codes:
 *   None
 **/
static void
lpfc_idle_stat_delay_work(struct work_struct *work)
{
        struct lpfc_hba *phba = container_of(to_delayed_work(work),
                                             struct lpfc_hba,
                                             idle_stat_delay_work);
        struct lpfc_queue *eq;
        struct lpfc_sli4_hdw_queue *hdwq;
        struct lpfc_idle_stat *idle_stat;
        u32 i, idle_percent;
        u64 wall, wall_idle, diff_wall, diff_idle, busy_time;

        if (test_bit(FC_UNLOADING, &phba->pport->load_flag))
                return;

        if (phba->link_state == LPFC_HBA_ERROR ||
            test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag) ||
            phba->cmf_active_mode != LPFC_CFG_OFF)
                goto requeue;

        for_each_present_cpu(i) {
                hdwq = &phba->sli4_hba.hdwq[phba->sli4_hba.cpu_map[i].hdwq];
                eq = hdwq->hba_eq;

                /* Skip if we've already handled this eq's primary CPU */
                if (eq->chann != i)
                        continue;

                idle_stat = &phba->sli4_hba.idle_stat[i];

                /* get_cpu_idle_time returns values as running counters. Thus,
                 * to know the amount for this period, the prior counter values
                 * need to be subtracted from the current counter values.
                 * From there, the idle time stat can be calculated as a
                 * percentage of 100 - the sum of the other consumption times.
                 */
                wall_idle = get_cpu_idle_time(i, &wall, 1);
                diff_idle = wall_idle - idle_stat->prev_idle;
                diff_wall = wall - idle_stat->prev_wall;

                if (diff_wall <= diff_idle)
                        busy_time = 0;
                else
                        busy_time = diff_wall - diff_idle;

                idle_percent = div64_u64(100 * busy_time, diff_wall);
                idle_percent = 100 - idle_percent;

                if (idle_percent < 15)
                        eq->poll_mode = LPFC_QUEUE_WORK;
                else
                        eq->poll_mode = LPFC_THREADED_IRQ;

                idle_stat->prev_idle = wall_idle;
                idle_stat->prev_wall = wall;
        }

requeue:
        schedule_delayed_work(&phba->idle_stat_delay_work,
                              msecs_to_jiffies(LPFC_IDLE_STAT_DELAY));
}

static void
lpfc_hb_eq_delay_work(struct work_struct *work)
{
        struct lpfc_hba *phba = container_of(to_delayed_work(work),
                                             struct lpfc_hba, eq_delay_work);
        struct lpfc_eq_intr_info *eqi, *eqi_new;
        struct lpfc_queue *eq, *eq_next;
        unsigned char *ena_delay = NULL;
        uint32_t usdelay;
        int i;

        if (!phba->cfg_auto_imax ||
            test_bit(FC_UNLOADING, &phba->pport->load_flag))
                return;

        if (phba->link_state == LPFC_HBA_ERROR ||
            test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
                goto requeue;

        ena_delay = kcalloc(phba->sli4_hba.num_possible_cpu, sizeof(*ena_delay),
                            GFP_KERNEL);
        if (!ena_delay)
                goto requeue;

        for (i = 0; i < phba->cfg_irq_chann; i++) {
                /* Get the EQ corresponding to the IRQ vector */
                eq = phba->sli4_hba.hba_eq_hdl[i].eq;
                if (!eq)
                        continue;
                if (eq->q_mode || eq->q_flag & HBA_EQ_DELAY_CHK) {
                        eq->q_flag &= ~HBA_EQ_DELAY_CHK;
                        ena_delay[eq->last_cpu] = 1;
                }
        }

        for_each_present_cpu(i) {
                eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i);
                if (ena_delay[i]) {
                        usdelay = (eqi->icnt >> 10) * LPFC_EQ_DELAY_STEP;
                        if (usdelay > LPFC_MAX_AUTO_EQ_DELAY)
                                usdelay = LPFC_MAX_AUTO_EQ_DELAY;
                } else {
                        usdelay = 0;
                }

                eqi->icnt = 0;

                list_for_each_entry_safe(eq, eq_next, &eqi->list, cpu_list) {
                        if (unlikely(eq->last_cpu != i)) {
                                eqi_new = per_cpu_ptr(phba->sli4_hba.eq_info,
                                                      eq->last_cpu);
                                list_move_tail(&eq->cpu_list, &eqi_new->list);
                                continue;
                        }
                        if (usdelay != eq->q_mode)
                                lpfc_modify_hba_eq_delay(phba, eq->hdwq, 1,
                                                         usdelay);
                }
        }

        kfree(ena_delay);

requeue:
        queue_delayed_work(phba->wq, &phba->eq_delay_work,
                           msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));
}

/**
 * lpfc_hb_mxp_handler - Multi-XRI pools handler to adjust XRI distribution
 * @phba: pointer to lpfc hba data structure.
 *
 * For each heartbeat, this routine does some heuristic methods to adjust
 * XRI distribution. The goal is to fully utilize free XRIs.
 **/
static void lpfc_hb_mxp_handler(struct lpfc_hba *phba)
{
        u32 i;
        u32 hwq_count;

        hwq_count = phba->cfg_hdw_queue;
        for (i = 0; i < hwq_count; i++) {
                /* Adjust XRIs in private pool */
                lpfc_adjust_pvt_pool_count(phba, i);

                /* Adjust high watermark */
                lpfc_adjust_high_watermark(phba, i);

#ifdef LPFC_MXP_STAT
                /* Snapshot pbl, pvt and busy count */
                lpfc_snapshot_mxp(phba, i);
#endif
        }
}

/**
 * lpfc_issue_hb_mbox - Issues heart-beat mailbox command
 * @phba: pointer to lpfc hba data structure.
 *
 * If a HB mbox is not already in progrees, this routine will allocate
 * a LPFC_MBOXQ_t, populate it with a MBX_HEARTBEAT (0x31) command,
 * and issue it. The HBA_HBEAT_INP flag means the command is in progress.
 **/
int
lpfc_issue_hb_mbox(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *pmboxq;
        int retval;

        /* Is a Heartbeat mbox already in progress */
        if (phba->hba_flag & HBA_HBEAT_INP)
                return 0;

        pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmboxq)
                return -ENOMEM;

        lpfc_heart_beat(phba, pmboxq);
        pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
        pmboxq->vport = phba->pport;
        retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);

        if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
                mempool_free(pmboxq, phba->mbox_mem_pool);
                return -ENXIO;
        }
        phba->hba_flag |= HBA_HBEAT_INP;

        return 0;
}

/**
 * lpfc_issue_hb_tmo - Signals heartbeat timer to issue mbox command
 * @phba: pointer to lpfc hba data structure.
 *
 * The heartbeat timer (every 5 sec) will fire. If the HBA_HBEAT_TMO
 * flag is set, it will force a MBX_HEARTBEAT mbox command, regardless
 * of the value of lpfc_enable_hba_heartbeat.
 * If lpfc_enable_hba_heartbeat is set, the timeout routine will always
 * try to issue a MBX_HEARTBEAT mbox command.
 **/
void
lpfc_issue_hb_tmo(struct lpfc_hba *phba)
{
        if (phba->cfg_enable_hba_heartbeat)
                return;
        phba->hba_flag |= HBA_HBEAT_TMO;
}

/**
 * lpfc_hb_timeout_handler - The HBA-timer timeout handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This is the actual HBA-timer timeout handler to be invoked by the worker
 * thread whenever the HBA timer fired and HBA-timeout event posted. This
 * handler performs any periodic operations needed for the device. If such
 * periodic event has already been attended to either in the interrupt handler
 * or by processing slow-ring or fast-ring events within the HBA-timer
 * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets
 * the timer for the next timeout period. If lpfc heart-beat mailbox command
 * is configured and there is no heart-beat mailbox command outstanding, a
 * heart-beat mailbox is issued and timer set properly. Otherwise, if there
 * has been a heart-beat mailbox command outstanding, the HBA shall be put
 * to offline.
 **/
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        struct lpfc_dmabuf *buf_ptr;
        int retval = 0;
        int i, tmo;
        struct lpfc_sli *psli = &phba->sli;
        LIST_HEAD(completions);

        if (phba->cfg_xri_rebalancing) {
                /* Multi-XRI pools handler */
                lpfc_hb_mxp_handler(phba);
        }

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        lpfc_rcv_seq_check_edtov(vports[i]);
                        lpfc_fdmi_change_check(vports[i]);
                }
        lpfc_destroy_vport_work_array(phba, vports);

        if (phba->link_state == LPFC_HBA_ERROR ||
            test_bit(FC_UNLOADING, &phba->pport->load_flag) ||
            test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
                return;

        if (phba->elsbuf_cnt &&
                (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) {
                spin_lock_irq(&phba->hbalock);
                list_splice_init(&phba->elsbuf, &completions);
                phba->elsbuf_cnt = 0;
                phba->elsbuf_prev_cnt = 0;
                spin_unlock_irq(&phba->hbalock);

                while (!list_empty(&completions)) {
                        list_remove_head(&completions, buf_ptr,
                                struct lpfc_dmabuf, list);
                        lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
                        kfree(buf_ptr);
                }
        }
        phba->elsbuf_prev_cnt = phba->elsbuf_cnt;

        /* If there is no heart beat outstanding, issue a heartbeat command */
        if (phba->cfg_enable_hba_heartbeat) {
                /* If IOs are completing, no need to issue a MBX_HEARTBEAT */
                spin_lock_irq(&phba->pport->work_port_lock);
                if (time_after(phba->last_completion_time +
                                msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL),
                                jiffies)) {
                        spin_unlock_irq(&phba->pport->work_port_lock);
                        if (phba->hba_flag & HBA_HBEAT_INP)
                                tmo = (1000 * LPFC_HB_MBOX_TIMEOUT);
                        else
                                tmo = (1000 * LPFC_HB_MBOX_INTERVAL);
                        goto out;
                }
                spin_unlock_irq(&phba->pport->work_port_lock);

                /* Check if a MBX_HEARTBEAT is already in progress */
                if (phba->hba_flag & HBA_HBEAT_INP) {
                        /*
                         * If heart beat timeout called with HBA_HBEAT_INP set
                         * we need to give the hb mailbox cmd a chance to
                         * complete or TMO.
                         */
                        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0459 Adapter heartbeat still outstanding: "
                                "last compl time was %d ms.\n",
                                jiffies_to_msecs(jiffies
                                         - phba->last_completion_time));
                        tmo = (1000 * LPFC_HB_MBOX_TIMEOUT);
                } else {
                        if ((!(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) &&
                                (list_empty(&psli->mboxq))) {

                                retval = lpfc_issue_hb_mbox(phba);
                                if (retval) {
                                        tmo = (1000 * LPFC_HB_MBOX_INTERVAL);
                                        goto out;
                                }
                                phba->skipped_hb = 0;
                        } else if (time_before_eq(phba->last_completion_time,
                                        phba->skipped_hb)) {
                                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "2857 Last completion time not "
                                        " updated in %d ms\n",
                                        jiffies_to_msecs(jiffies
                                                 - phba->last_completion_time));
                        } else
                                phba->skipped_hb = jiffies;

                        tmo = (1000 * LPFC_HB_MBOX_TIMEOUT);
                        goto out;
                }
        } else {
                /* Check to see if we want to force a MBX_HEARTBEAT */
                if (phba->hba_flag & HBA_HBEAT_TMO) {
                        retval = lpfc_issue_hb_mbox(phba);
                        if (retval)
                                tmo = (1000 * LPFC_HB_MBOX_INTERVAL);
                        else
                                tmo = (1000 * LPFC_HB_MBOX_TIMEOUT);
                        goto out;
                }
                tmo = (1000 * LPFC_HB_MBOX_INTERVAL);
        }
out:
        mod_timer(&phba->hb_tmofunc, jiffies + msecs_to_jiffies(tmo));
}

/**
 * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to bring the HBA offline when HBA hardware error
 * other than Port Error 6 has been detected.
 **/
static void
lpfc_offline_eratt(struct lpfc_hba *phba)
{
        struct lpfc_sli   *psli = &phba->sli;

        spin_lock_irq(&phba->hbalock);
        psli->sli_flag &= ~LPFC_SLI_ACTIVE;
        spin_unlock_irq(&phba->hbalock);
        lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);

        lpfc_offline(phba);
        lpfc_reset_barrier(phba);
        spin_lock_irq(&phba->hbalock);
        lpfc_sli_brdreset(phba);
        spin_unlock_irq(&phba->hbalock);
        lpfc_hba_down_post(phba);
        lpfc_sli_brdready(phba, HS_MBRDY);
        lpfc_unblock_mgmt_io(phba);
        phba->link_state = LPFC_HBA_ERROR;
        return;
}

/**
 * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to bring a SLI4 HBA offline when HBA hardware error
 * other than Port Error 6 has been detected.
 **/
void
lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
{
        spin_lock_irq(&phba->hbalock);
        if (phba->link_state == LPFC_HBA_ERROR &&
                test_bit(HBA_PCI_ERR, &phba->bit_flags)) {
                spin_unlock_irq(&phba->hbalock);
                return;
        }
        phba->link_state = LPFC_HBA_ERROR;
        spin_unlock_irq(&phba->hbalock);

        lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
        lpfc_sli_flush_io_rings(phba);
        lpfc_offline(phba);
        lpfc_hba_down_post(phba);
        lpfc_unblock_mgmt_io(phba);
}

/**
 * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the deferred HBA hardware error
 * conditions. This type of error is indicated by HBA by setting ER1
 * and another ER bit in the host status register. The driver will
 * wait until the ER1 bit clears before handling the error condition.
 **/
static void
lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
{
        uint32_t old_host_status = phba->work_hs;
        struct lpfc_sli *psli = &phba->sli;

        /* If the pci channel is offline, ignore possible errors,
         * since we cannot communicate with the pci card anyway.
         */
        if (pci_channel_offline(phba->pcidev)) {
                spin_lock_irq(&phba->hbalock);
                phba->hba_flag &= ~DEFER_ERATT;
                spin_unlock_irq(&phba->hbalock);
                return;
        }

        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "0479 Deferred Adapter Hardware Error "
                        "Data: x%x x%x x%x\n",
                        phba->work_hs, phba->work_status[0],
                        phba->work_status[1]);

        spin_lock_irq(&phba->hbalock);
        psli->sli_flag &= ~LPFC_SLI_ACTIVE;
        spin_unlock_irq(&phba->hbalock);


        /*
         * Firmware stops when it triggred erratt. That could cause the I/Os
         * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
         * SCSI layer retry it after re-establishing link.
         */
        lpfc_sli_abort_fcp_rings(phba);

        /*
         * There was a firmware error. Take the hba offline and then
         * attempt to restart it.
         */
        lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        lpfc_offline(phba);

        /* Wait for the ER1 bit to clear.*/
        while (phba->work_hs & HS_FFER1) {
                msleep(100);
                if (lpfc_readl(phba->HSregaddr, &phba->work_hs)) {
                        phba->work_hs = UNPLUG_ERR ;
                        break;
                }
                /* If driver is unloading let the worker thread continue */
                if (test_bit(FC_UNLOADING, &phba->pport->load_flag)) {
                        phba->work_hs = 0;
                        break;
                }
        }

        /*
         * This is to ptrotect against a race condition in which
         * first write to the host attention register clear the
         * host status register.
         */
        if (!phba->work_hs && !test_bit(FC_UNLOADING, &phba->pport->load_flag))
                phba->work_hs = old_host_status & ~HS_FFER1;

        spin_lock_irq(&phba->hbalock);
        phba->hba_flag &= ~DEFER_ERATT;
        spin_unlock_irq(&phba->hbalock);
        phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
        phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}

static void
lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
{
        struct lpfc_board_event_header board_event;
        struct Scsi_Host *shost;

        board_event.event_type = FC_REG_BOARD_EVENT;
        board_event.subcategory = LPFC_EVENT_PORTINTERR;
        shost = lpfc_shost_from_vport(phba->pport);
        fc_host_post_vendor_event(shost, fc_get_event_number(),
                                  sizeof(board_event),
                                  (char *) &board_event,
                                  LPFC_NL_VENDOR_ID);
}

/**
 * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the following HBA hardware error
 * conditions:
 * 1 - HBA error attention interrupt
 * 2 - DMA ring index out of range
 * 3 - Mailbox command came back as unknown
 **/
static void
lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport = phba->pport;
        struct lpfc_sli   *psli = &phba->sli;
        uint32_t event_data;
        unsigned long temperature;
        struct temp_event temp_event_data;
        struct Scsi_Host  *shost;

        /* If the pci channel is offline, ignore possible errors,
         * since we cannot communicate with the pci card anyway.
         */
        if (pci_channel_offline(phba->pcidev)) {
                spin_lock_irq(&phba->hbalock);
                phba->hba_flag &= ~DEFER_ERATT;
                spin_unlock_irq(&phba->hbalock);
                return;
        }

        /* If resets are disabled then leave the HBA alone and return */
        if (!phba->cfg_enable_hba_reset)
                return;

        /* Send an internal error event to mgmt application */
        lpfc_board_errevt_to_mgmt(phba);

        if (phba->hba_flag & DEFER_ERATT)
                lpfc_handle_deferred_eratt(phba);

        if ((phba->work_hs & HS_FFER6) || (phba->work_hs & HS_FFER8)) {
                if (phba->work_hs & HS_FFER6)
                        /* Re-establishing Link */
                        lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
                                        "1301 Re-establishing Link "
                                        "Data: x%x x%x x%x\n",
                                        phba->work_hs, phba->work_status[0],
                                        phba->work_status[1]);
                if (phba->work_hs & HS_FFER8)
                        /* Device Zeroization */
                        lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
                                        "2861 Host Authentication device "
                                        "zeroization Data:x%x x%x x%x\n",
                                        phba->work_hs, phba->work_status[0],
                                        phba->work_status[1]);

                spin_lock_irq(&phba->hbalock);
                psli->sli_flag &= ~LPFC_SLI_ACTIVE;
                spin_unlock_irq(&phba->hbalock);

                /*
                * Firmware stops when it triggled erratt with HS_FFER6.
                * That could cause the I/Os dropped by the firmware.
                * Error iocb (I/O) on txcmplq and let the SCSI layer
                * retry it after re-establishing link.
                */
                lpfc_sli_abort_fcp_rings(phba);

                /*
                 * There was a firmware error.  Take the hba offline and then
                 * attempt to restart it.
                 */
                lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
                lpfc_offline(phba);
                lpfc_sli_brdrestart(phba);
                if (lpfc_online(phba) == 0) {   /* Initialize the HBA */
                        lpfc_unblock_mgmt_io(phba);
                        return;
                }
                lpfc_unblock_mgmt_io(phba);
        } else if (phba->work_hs & HS_CRIT_TEMP) {
                temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET);
                temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
                temp_event_data.event_code = LPFC_CRIT_TEMP;
                temp_event_data.data = (uint32_t)temperature;

                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0406 Adapter maximum temperature exceeded "
                                "(%ld), taking this port offline "
                                "Data: x%x x%x x%x\n",
                                temperature, phba->work_hs,
                                phba->work_status[0], phba->work_status[1]);

                shost = lpfc_shost_from_vport(phba->pport);
                fc_host_post_vendor_event(shost, fc_get_event_number(),
                                          sizeof(temp_event_data),
                                          (char *) &temp_event_data,
                                          SCSI_NL_VID_TYPE_PCI
                                          | PCI_VENDOR_ID_EMULEX);

                spin_lock_irq(&phba->hbalock);
                phba->over_temp_state = HBA_OVER_TEMP;
                spin_unlock_irq(&phba->hbalock);
                lpfc_offline_eratt(phba);

        } else {
                /* The if clause above forces this code path when the status
                 * failure is a value other than FFER6. Do not call the offline
                 * twice. This is the adapter hardware error path.
                 */
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0457 Adapter Hardware Error "
                                "Data: x%x x%x x%x\n",
                                phba->work_hs,
                                phba->work_status[0], phba->work_status[1]);

                event_data = FC_REG_DUMP_EVENT;
                shost = lpfc_shost_from_vport(vport);
                fc_host_post_vendor_event(shost, fc_get_event_number(),
                                sizeof(event_data), (char *) &event_data,
                                SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);

                lpfc_offline_eratt(phba);
        }
        return;
}

/**
 * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg
 * @phba: pointer to lpfc hba data structure.
 * @mbx_action: flag for mailbox shutdown action.
 * @en_rn_msg: send reset/port recovery message.
 * This routine is invoked to perform an SLI4 port PCI function reset in
 * response to port status register polling attention. It waits for port
 * status register (ERR, RDY, RN) bits before proceeding with function reset.
 * During this process, interrupt vectors are freed and later requested
 * for handling possible port resource change.
 **/
static int
lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action,
                            bool en_rn_msg)
{
        int rc;
        uint32_t intr_mode;
        LPFC_MBOXQ_t *mboxq;

        if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
            LPFC_SLI_INTF_IF_TYPE_2) {
                /*
                 * On error status condition, driver need to wait for port
                 * ready before performing reset.
                 */
                rc = lpfc_sli4_pdev_status_reg_wait(phba);
                if (rc)
                        return rc;
        }

        /* need reset: attempt for port recovery */
        if (en_rn_msg)
                lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                "2887 Reset Needed: Attempting Port "
                                "Recovery...\n");

        /* If we are no wait, the HBA has been reset and is not
         * functional, thus we should clear
         * (LPFC_SLI_ACTIVE | LPFC_SLI_MBOX_ACTIVE) flags.
         */
        if (mbx_action == LPFC_MBX_NO_WAIT) {
                spin_lock_irq(&phba->hbalock);
                phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
                if (phba->sli.mbox_active) {
                        mboxq = phba->sli.mbox_active;
                        mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
                        __lpfc_mbox_cmpl_put(phba, mboxq);
                        phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
                        phba->sli.mbox_active = NULL;
                }
                spin_unlock_irq(&phba->hbalock);
        }

        lpfc_offline_prep(phba, mbx_action);
        lpfc_sli_flush_io_rings(phba);
        lpfc_offline(phba);
        /* release interrupt for possible resource change */
        lpfc_sli4_disable_intr(phba);
        rc = lpfc_sli_brdrestart(phba);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "6309 Failed to restart board\n");
                return rc;
        }
        /* request and enable interrupt */
        intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3175 Failed to enable interrupt\n");
                return -EIO;
        }
        phba->intr_mode = intr_mode;
        rc = lpfc_online(phba);
        if (rc == 0)
                lpfc_unblock_mgmt_io(phba);

        return rc;
}

/**
 * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to handle the SLI4 HBA hardware error attention
 * conditions.
 **/
static void
lpfc_handle_eratt_s4(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport = phba->pport;
        uint32_t event_data;
        struct Scsi_Host *shost;
        uint32_t if_type;
        struct lpfc_register portstat_reg = {0};
        uint32_t reg_err1, reg_err2;
        uint32_t uerrlo_reg, uemasklo_reg;
        uint32_t smphr_port_status = 0, pci_rd_rc1, pci_rd_rc2;
        bool en_rn_msg = true;
        struct temp_event temp_event_data;
        struct lpfc_register portsmphr_reg;
        int rc, i;

        /* If the pci channel is offline, ignore possible errors, since
         * we cannot communicate with the pci card anyway.
         */
        if (pci_channel_offline(phba->pcidev)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3166 pci channel is offline\n");
                lpfc_sli_flush_io_rings(phba);
                return;
        }

        memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                pci_rd_rc1 = lpfc_readl(
                                phba->sli4_hba.u.if_type0.UERRLOregaddr,
                                &uerrlo_reg);
                pci_rd_rc2 = lpfc_readl(
                                phba->sli4_hba.u.if_type0.UEMASKLOregaddr,
                                &uemasklo_reg);
                /* consider PCI bus read error as pci_channel_offline */
                if (pci_rd_rc1 == -EIO && pci_rd_rc2 == -EIO)
                        return;
                if (!(phba->hba_flag & HBA_RECOVERABLE_UE)) {
                        lpfc_sli4_offline_eratt(phba);
                        return;
                }
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "7623 Checking UE recoverable");

                for (i = 0; i < phba->sli4_hba.ue_to_sr / 1000; i++) {
                        if (lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
                                       &portsmphr_reg.word0))
                                continue;

                        smphr_port_status = bf_get(lpfc_port_smphr_port_status,
                                                   &portsmphr_reg);
                        if ((smphr_port_status & LPFC_PORT_SEM_MASK) ==
                            LPFC_PORT_SEM_UE_RECOVERABLE)
                                break;
                        /*Sleep for 1Sec, before checking SEMAPHORE */
                        msleep(1000);
                }

                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "4827 smphr_port_status x%x : Waited %dSec",
                                smphr_port_status, i);

                /* Recoverable UE, reset the HBA device */
                if ((smphr_port_status & LPFC_PORT_SEM_MASK) ==
                    LPFC_PORT_SEM_UE_RECOVERABLE) {
                        for (i = 0; i < 20; i++) {
                                msleep(1000);
                                if (!lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
                                    &portsmphr_reg.word0) &&
                                    (LPFC_POST_STAGE_PORT_READY ==
                                     bf_get(lpfc_port_smphr_port_status,
                                     &portsmphr_reg))) {
                                        rc = lpfc_sli4_port_sta_fn_reset(phba,
                                                LPFC_MBX_NO_WAIT, en_rn_msg);
                                        if (rc == 0)
                                                return;
                                        lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "4215 Failed to recover UE");
                                        break;
                                }
                        }
                }
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "7624 Firmware not ready: Failing UE recovery,"
                                " waited %dSec", i);
                phba->link_state = LPFC_HBA_ERROR;
                break;

        case LPFC_SLI_INTF_IF_TYPE_2:
        case LPFC_SLI_INTF_IF_TYPE_6:
                pci_rd_rc1 = lpfc_readl(
                                phba->sli4_hba.u.if_type2.STATUSregaddr,
                                &portstat_reg.word0);
                /* consider PCI bus read error as pci_channel_offline */
                if (pci_rd_rc1 == -EIO) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3151 PCI bus read access failure: x%x\n",
                                readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
                        lpfc_sli4_offline_eratt(phba);
                        return;
                }
                reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
                reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
                if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2889 Port Overtemperature event, "
                                        "taking port offline Data: x%x x%x\n",
                                        reg_err1, reg_err2);

                        phba->sfp_alarm |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE;
                        temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
                        temp_event_data.event_code = LPFC_CRIT_TEMP;
                        temp_event_data.data = 0xFFFFFFFF;

                        shost = lpfc_shost_from_vport(phba->pport);
                        fc_host_post_vendor_event(shost, fc_get_event_number(),
                                                  sizeof(temp_event_data),
                                                  (char *)&temp_event_data,
                                                  SCSI_NL_VID_TYPE_PCI
                                                  | PCI_VENDOR_ID_EMULEX);

                        spin_lock_irq(&phba->hbalock);
                        phba->over_temp_state = HBA_OVER_TEMP;
                        spin_unlock_irq(&phba->hbalock);
                        lpfc_sli4_offline_eratt(phba);
                        return;
                }
                if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
                    reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                        "3143 Port Down: Firmware Update "
                                        "Detected\n");
                        en_rn_msg = false;
                } else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
                         reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
                        lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                        "3144 Port Down: Debug Dump\n");
                else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
                         reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON)
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3145 Port Down: Provisioning\n");

                /* If resets are disabled then leave the HBA alone and return */
                if (!phba->cfg_enable_hba_reset)
                        return;

                /* Check port status register for function reset */
                rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT,
                                en_rn_msg);
                if (rc == 0) {
                        /* don't report event on forced debug dump */
                        if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 &&
                            reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP)
                                return;
                        else
                                break;
                }
                /* fall through for not able to recover */
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3152 Unrecoverable error\n");
                lpfc_sli4_offline_eratt(phba);
                break;
        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                break;
        }
        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                        "3123 Report dump event to upper layer\n");
        /* Send an internal error event to mgmt application */
        lpfc_board_errevt_to_mgmt(phba);

        event_data = FC_REG_DUMP_EVENT;
        shost = lpfc_shost_from_vport(vport);
        fc_host_post_vendor_event(shost, fc_get_event_number(),
                                  sizeof(event_data), (char *) &event_data,
                                  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
}

/**
 * lpfc_handle_eratt - Wrapper func for handling hba error attention
 * @phba: pointer to lpfc HBA data structure.
 *
 * This routine wraps the actual SLI3 or SLI4 hba error attention handling
 * routine from the API jump table function pointer from the lpfc_hba struct.
 *
 * Return codes
 *   0 - success.
 *   Any other value - error.
 **/
void
lpfc_handle_eratt(struct lpfc_hba *phba)
{
        (*phba->lpfc_handle_eratt)(phba);
}

/**
 * lpfc_handle_latt - The HBA link event handler
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked from the worker thread to handle a HBA host
 * attention link event. SLI3 only.
 **/
void
lpfc_handle_latt(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport = phba->pport;
        struct lpfc_sli   *psli = &phba->sli;
        LPFC_MBOXQ_t *pmb;
        volatile uint32_t control;
        int rc = 0;

        pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                rc = 1;
                goto lpfc_handle_latt_err_exit;
        }

        rc = lpfc_mbox_rsrc_prep(phba, pmb);
        if (rc) {
                rc = 2;
                mempool_free(pmb, phba->mbox_mem_pool);
                goto lpfc_handle_latt_err_exit;
        }

        /* Cleanup any outstanding ELS commands */
        lpfc_els_flush_all_cmd(phba);
        psli->slistat.link_event++;
        lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf);
        pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
        pmb->vport = vport;
        /* Block ELS IOCBs until we have processed this mbox command */
        phba->sli.sli3_ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
        rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT);
        if (rc == MBX_NOT_FINISHED) {
                rc = 4;
                goto lpfc_handle_latt_free_mbuf;
        }

        /* Clear Link Attention in HA REG */
        spin_lock_irq(&phba->hbalock);
        writel(HA_LATT, phba->HAregaddr);
        readl(phba->HAregaddr); /* flush */
        spin_unlock_irq(&phba->hbalock);

        return;

lpfc_handle_latt_free_mbuf:
        phba->sli.sli3_ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
        lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
lpfc_handle_latt_err_exit:
        /* Enable Link attention interrupts */
        spin_lock_irq(&phba->hbalock);
        psli->sli_flag |= LPFC_PROCESS_LA;
        control = readl(phba->HCregaddr);
        control |= HC_LAINT_ENA;
        writel(control, phba->HCregaddr);
        readl(phba->HCregaddr); /* flush */

        /* Clear Link Attention in HA REG */
        writel(HA_LATT, phba->HAregaddr);
        readl(phba->HAregaddr); /* flush */
        spin_unlock_irq(&phba->hbalock);
        lpfc_linkdown(phba);
        phba->link_state = LPFC_HBA_ERROR;

        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc);

        return;
}

static void
lpfc_fill_vpd(struct lpfc_hba *phba, uint8_t *vpd, int length, int *pindex)
{
        int i, j;

        while (length > 0) {
                /* Look for Serial Number */
                if ((vpd[*pindex] == 'S') && (vpd[*pindex + 1] == 'N')) {
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        j = 0;
                        length -= (3+i);
                        while (i--) {
                                phba->SerialNumber[j++] = vpd[(*pindex)++];
                                if (j == 31)
                                        break;
                        }
                        phba->SerialNumber[j] = 0;
                        continue;
                } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '1')) {
                        phba->vpd_flag |= VPD_MODEL_DESC;
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        j = 0;
                        length -= (3+i);
                        while (i--) {
                                phba->ModelDesc[j++] = vpd[(*pindex)++];
                                if (j == 255)
                                        break;
                        }
                        phba->ModelDesc[j] = 0;
                        continue;
                } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '2')) {
                        phba->vpd_flag |= VPD_MODEL_NAME;
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        j = 0;
                        length -= (3+i);
                        while (i--) {
                                phba->ModelName[j++] = vpd[(*pindex)++];
                                if (j == 79)
                                        break;
                        }
                        phba->ModelName[j] = 0;
                        continue;
                } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '3')) {
                        phba->vpd_flag |= VPD_PROGRAM_TYPE;
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        j = 0;
                        length -= (3+i);
                        while (i--) {
                                phba->ProgramType[j++] = vpd[(*pindex)++];
                                if (j == 255)
                                        break;
                        }
                        phba->ProgramType[j] = 0;
                        continue;
                } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '4')) {
                        phba->vpd_flag |= VPD_PORT;
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        j = 0;
                        length -= (3 + i);
                        while (i--) {
                                if ((phba->sli_rev == LPFC_SLI_REV4) &&
                                    (phba->sli4_hba.pport_name_sta ==
                                     LPFC_SLI4_PPNAME_GET)) {
                                        j++;
                                        (*pindex)++;
                                } else
                                        phba->Port[j++] = vpd[(*pindex)++];
                                if (j == 19)
                                        break;
                        }
                        if ((phba->sli_rev != LPFC_SLI_REV4) ||
                            (phba->sli4_hba.pport_name_sta ==
                             LPFC_SLI4_PPNAME_NON))
                                phba->Port[j] = 0;
                        continue;
                } else {
                        *pindex += 2;
                        i = vpd[*pindex];
                        *pindex += 1;
                        *pindex += i;
                        length -= (3 + i);
                }
        }
}

/**
 * lpfc_parse_vpd - Parse VPD (Vital Product Data)
 * @phba: pointer to lpfc hba data structure.
 * @vpd: pointer to the vital product data.
 * @len: length of the vital product data in bytes.
 *
 * This routine parses the Vital Product Data (VPD). The VPD is treated as
 * an array of characters. In this routine, the ModelName, ProgramType, and
 * ModelDesc, etc. fields of the phba data structure will be populated.
 *
 * Return codes
 *   0 - pointer to the VPD passed in is NULL
 *   1 - success
 **/
int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
        uint8_t lenlo, lenhi;
        int Length;
        int i;
        int finished = 0;
        int index = 0;

        if (!vpd)
                return 0;

        /* Vital Product */
        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "0455 Vital Product Data: x%x x%x x%x x%x\n",
                        (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
                        (uint32_t) vpd[3]);
        while (!finished && (index < (len - 4))) {
                switch (vpd[index]) {
                case 0x82:
                case 0x91:
                        index += 1;
                        lenlo = vpd[index];
                        index += 1;
                        lenhi = vpd[index];
                        index += 1;
                        i = ((((unsigned short)lenhi) << 8) + lenlo);
                        index += i;
                        break;
                case 0x90:
                        index += 1;
                        lenlo = vpd[index];
                        index += 1;
                        lenhi = vpd[index];
                        index += 1;
                        Length = ((((unsigned short)lenhi) << 8) + lenlo);
                        if (Length > len - index)
                                Length = len - index;

                        lpfc_fill_vpd(phba, vpd, Length, &index);
                        finished = 0;
                        break;
                case 0x78:
                        finished = 1;
                        break;
                default:
                        index ++;
                        break;
                }
        }

        return(1);
}

/**
 * lpfc_get_atto_model_desc - Retrieve ATTO HBA device model name and description
 * @phba: pointer to lpfc hba data structure.
 * @mdp: pointer to the data structure to hold the derived model name.
 * @descp: pointer to the data structure to hold the derived description.
 *
 * This routine retrieves HBA's description based on its registered PCI device
 * ID. The @descp passed into this function points to an array of 256 chars. It
 * shall be returned with the model name, maximum speed, and the host bus type.
 * The @mdp passed into this function points to an array of 80 chars. When the
 * function returns, the @mdp will be filled with the model name.
 **/
static void
lpfc_get_atto_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
{
        uint16_t sub_dev_id = phba->pcidev->subsystem_device;
        char *model = "<Unknown>";
        int tbolt = 0;

        switch (sub_dev_id) {
        case PCI_DEVICE_ID_CLRY_161E:
                model = "161E";
                break;
        case PCI_DEVICE_ID_CLRY_162E:
                model = "162E";
                break;
        case PCI_DEVICE_ID_CLRY_164E:
                model = "164E";
                break;
        case PCI_DEVICE_ID_CLRY_161P:
                model = "161P";
                break;
        case PCI_DEVICE_ID_CLRY_162P:
                model = "162P";
                break;
        case PCI_DEVICE_ID_CLRY_164P:
                model = "164P";
                break;
        case PCI_DEVICE_ID_CLRY_321E:
                model = "321E";
                break;
        case PCI_DEVICE_ID_CLRY_322E:
                model = "322E";
                break;
        case PCI_DEVICE_ID_CLRY_324E:
                model = "324E";
                break;
        case PCI_DEVICE_ID_CLRY_321P:
                model = "321P";
                break;
        case PCI_DEVICE_ID_CLRY_322P:
                model = "322P";
                break;
        case PCI_DEVICE_ID_CLRY_324P:
                model = "324P";
                break;
        case PCI_DEVICE_ID_TLFC_2XX2:
                model = "2XX2";
                tbolt = 1;
                break;
        case PCI_DEVICE_ID_TLFC_3162:
                model = "3162";
                tbolt = 1;
                break;
        case PCI_DEVICE_ID_TLFC_3322:
                model = "3322";
                tbolt = 1;
                break;
        default:
                model = "Unknown";
                break;
        }

        if (mdp && mdp[0] == '\0')
                snprintf(mdp, 79, "%s", model);

        if (descp && descp[0] == '\0')
                snprintf(descp, 255,
                         "ATTO %s%s, Fibre Channel Adapter Initiator, Port %s",
                         (tbolt) ? "ThunderLink FC " : "Celerity FC-",
                         model,
                         phba->Port);
}

/**
 * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
 * @phba: pointer to lpfc hba data structure.
 * @mdp: pointer to the data structure to hold the derived model name.
 * @descp: pointer to the data structure to hold the derived description.
 *
 * This routine retrieves HBA's description based on its registered PCI device
 * ID. The @descp passed into this function points to an array of 256 chars. It
 * shall be returned with the model name, maximum speed, and the host bus type.
 * The @mdp passed into this function points to an array of 80 chars. When the
 * function returns, the @mdp will be filled with the model name.
 **/
static void
lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
{
        lpfc_vpd_t *vp;
        uint16_t dev_id = phba->pcidev->device;
        int max_speed;
        int GE = 0;
        int oneConnect = 0; /* default is not a oneConnect */
        struct {
                char *name;
                char *bus;
                char *function;
        } m = {"<Unknown>", "", ""};

        if (mdp && mdp[0] != '\0'
                && descp && descp[0] != '\0')
                return;

        if (phba->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
                lpfc_get_atto_model_desc(phba, mdp, descp);
                return;
        }

        if (phba->lmt & LMT_64Gb)
                max_speed = 64;
        else if (phba->lmt & LMT_32Gb)
                max_speed = 32;
        else if (phba->lmt & LMT_16Gb)
                max_speed = 16;
        else if (phba->lmt & LMT_10Gb)
                max_speed = 10;
        else if (phba->lmt & LMT_8Gb)
                max_speed = 8;
        else if (phba->lmt & LMT_4Gb)
                max_speed = 4;
        else if (phba->lmt & LMT_2Gb)
                max_speed = 2;
        else if (phba->lmt & LMT_1Gb)
                max_speed = 1;
        else
                max_speed = 0;

        vp = &phba->vpd;

        switch (dev_id) {
        case PCI_DEVICE_ID_FIREFLY:
                m = (typeof(m)){"LP6000", "PCI",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SUPERFLY:
                if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
                        m = (typeof(m)){"LP7000", "PCI", ""};
                else
                        m = (typeof(m)){"LP7000E", "PCI", ""};
                m.function = "Obsolete, Unsupported Fibre Channel Adapter";
                break;
        case PCI_DEVICE_ID_DRAGONFLY:
                m = (typeof(m)){"LP8000", "PCI",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_CENTAUR:
                if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
                        m = (typeof(m)){"LP9002", "PCI", ""};
                else
                        m = (typeof(m)){"LP9000", "PCI", ""};
                m.function = "Obsolete, Unsupported Fibre Channel Adapter";
                break;
        case PCI_DEVICE_ID_RFLY:
                m = (typeof(m)){"LP952", "PCI",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_PEGASUS:
                m = (typeof(m)){"LP9802", "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_THOR:
                m = (typeof(m)){"LP10000", "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_VIPER:
                m = (typeof(m)){"LPX1000",  "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_PFLY:
                m = (typeof(m)){"LP982", "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_TFLY:
                m = (typeof(m)){"LP1050", "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_HELIOS:
                m = (typeof(m)){"LP11000", "PCI-X2",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_HELIOS_SCSP:
                m = (typeof(m)){"LP11000-SP", "PCI-X2",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_HELIOS_DCSP:
                m = (typeof(m)){"LP11002-SP",  "PCI-X2",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_NEPTUNE:
                m = (typeof(m)){"LPe1000", "PCIe",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_NEPTUNE_SCSP:
                m = (typeof(m)){"LPe1000-SP", "PCIe",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_NEPTUNE_DCSP:
                m = (typeof(m)){"LPe1002-SP", "PCIe",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_BMID:
                m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_BSMB:
                m = (typeof(m)){"LP111", "PCI-X2",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_ZEPHYR:
                m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_ZEPHYR_SCSP:
                m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_ZEPHYR_DCSP:
                m = (typeof(m)){"LP2105", "PCIe", "FCoE Adapter"};
                GE = 1;
                break;
        case PCI_DEVICE_ID_ZMID:
                m = (typeof(m)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_ZSMB:
                m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LP101:
                m = (typeof(m)){"LP101", "PCI-X",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LP10000S:
                m = (typeof(m)){"LP10000-S", "PCI",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LP11000S:
                m = (typeof(m)){"LP11000-S", "PCI-X2",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LPE11000S:
                m = (typeof(m)){"LPe11000-S", "PCIe",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT:
                m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT_MID:
                m = (typeof(m)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT_SMB:
                m = (typeof(m)){"LPe121", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT_DCSP:
                m = (typeof(m)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT_SCSP:
                m = (typeof(m)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SAT_S:
                m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_PROTEUS_VF:
                m = (typeof(m)){"LPev12000", "PCIe IOV",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_PROTEUS_PF:
                m = (typeof(m)){"LPev12000", "PCIe IOV",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_PROTEUS_S:
                m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_TIGERSHARK:
                oneConnect = 1;
                m = (typeof(m)){"OCe10100", "PCIe", "FCoE"};
                break;
        case PCI_DEVICE_ID_TOMCAT:
                oneConnect = 1;
                m = (typeof(m)){"OCe11100", "PCIe", "FCoE"};
                break;
        case PCI_DEVICE_ID_FALCON:
                m = (typeof(m)){"LPSe12002-ML1-E", "PCIe",
                                "EmulexSecure Fibre"};
                break;
        case PCI_DEVICE_ID_BALIUS:
                m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LANCER_FC:
                m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LANCER_FC_VF:
                m = (typeof(m)){"LPe16000", "PCIe",
                                "Obsolete, Unsupported Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LANCER_FCOE:
                oneConnect = 1;
                m = (typeof(m)){"OCe15100", "PCIe", "FCoE"};
                break;
        case PCI_DEVICE_ID_LANCER_FCOE_VF:
                oneConnect = 1;
                m = (typeof(m)){"OCe15100", "PCIe",
                                "Obsolete, Unsupported FCoE"};
                break;
        case PCI_DEVICE_ID_LANCER_G6_FC:
                m = (typeof(m)){"LPe32000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LANCER_G7_FC:
                m = (typeof(m)){"LPe36000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_LANCER_G7P_FC:
                m = (typeof(m)){"LPe38000", "PCIe", "Fibre Channel Adapter"};
                break;
        case PCI_DEVICE_ID_SKYHAWK:
        case PCI_DEVICE_ID_SKYHAWK_VF:
                oneConnect = 1;
                m = (typeof(m)){"OCe14000", "PCIe", "FCoE"};
                break;
        default:
                m = (typeof(m)){"Unknown", "", ""};
                break;
        }

        if (mdp && mdp[0] == '\0')
                snprintf(mdp, 79,"%s", m.name);
        /*
         * oneConnect hba requires special processing, they are all initiators
         * and we put the port number on the end
         */
        if (descp && descp[0] == '\0') {
                if (oneConnect)
                        snprintf(descp, 255,
                                "Emulex OneConnect %s, %s Initiator %s",
                                m.name, m.function,
                                phba->Port);
                else if (max_speed == 0)
                        snprintf(descp, 255,
                                "Emulex %s %s %s",
                                m.name, m.bus, m.function);
                else
                        snprintf(descp, 255,
                                "Emulex %s %d%s %s %s",
                                m.name, max_speed, (GE) ? "GE" : "Gb",
                                m.bus, m.function);
        }
}

/**
 * lpfc_sli3_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
 * @phba: pointer to lpfc hba data structure.
 * @pring: pointer to a IOCB ring.
 * @cnt: the number of IOCBs to be posted to the IOCB ring.
 *
 * This routine posts a given number of IOCBs with the associated DMA buffer
 * descriptors specified by the cnt argument to the given IOCB ring.
 *
 * Return codes
 *   The number of IOCBs NOT able to be posted to the IOCB ring.
 **/
int
lpfc_sli3_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
{
        IOCB_t *icmd;
        struct lpfc_iocbq *iocb;
        struct lpfc_dmabuf *mp1, *mp2;

        cnt += pring->missbufcnt;

        /* While there are buffers to post */
        while (cnt > 0) {
                /* Allocate buffer for  command iocb */
                iocb = lpfc_sli_get_iocbq(phba);
                if (iocb == NULL) {
                        pring->missbufcnt = cnt;
                        return cnt;
                }
                icmd = &iocb->iocb;

                /* 2 buffers can be posted per command */
                /* Allocate buffer to post */
                mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
                if (mp1)
                    mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys);
                if (!mp1 || !mp1->virt) {
                        kfree(mp1);
                        lpfc_sli_release_iocbq(phba, iocb);
                        pring->missbufcnt = cnt;
                        return cnt;
                }

                INIT_LIST_HEAD(&mp1->list);
                /* Allocate buffer to post */
                if (cnt > 1) {
                        mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
                        if (mp2)
                                mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
                                                            &mp2->phys);
                        if (!mp2 || !mp2->virt) {
                                kfree(mp2);
                                lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
                                kfree(mp1);
                                lpfc_sli_release_iocbq(phba, iocb);
                                pring->missbufcnt = cnt;
                                return cnt;
                        }

                        INIT_LIST_HEAD(&mp2->list);
                } else {
                        mp2 = NULL;
                }

                icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
                icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
                icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
                icmd->ulpBdeCount = 1;
                cnt--;
                if (mp2) {
                        icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
                        icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
                        icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
                        cnt--;
                        icmd->ulpBdeCount = 2;
                }

                icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
                icmd->ulpLe = 1;

                if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
                    IOCB_ERROR) {
                        lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
                        kfree(mp1);
                        cnt++;
                        if (mp2) {
                                lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
                                kfree(mp2);
                                cnt++;
                        }
                        lpfc_sli_release_iocbq(phba, iocb);
                        pring->missbufcnt = cnt;
                        return cnt;
                }
                lpfc_sli_ringpostbuf_put(phba, pring, mp1);
                if (mp2)
                        lpfc_sli_ringpostbuf_put(phba, pring, mp2);
        }
        pring->missbufcnt = 0;
        return 0;
}

/**
 * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine posts initial receive IOCB buffers to the ELS ring. The
 * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is
 * set to 64 IOCBs. SLI3 only.
 *
 * Return codes
 *   0 - success (currently always success)
 **/
static int
lpfc_post_rcv_buf(struct lpfc_hba *phba)
{
        struct lpfc_sli *psli = &phba->sli;

        /* Ring 0, ELS / CT buffers */
        lpfc_sli3_post_buffer(phba, &psli->sli3_ring[LPFC_ELS_RING], LPFC_BUF_RING0);
        /* Ring 2 - FCP no buffers needed */

        return 0;
}

#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))

/**
 * lpfc_sha_init - Set up initial array of hash table entries
 * @HashResultPointer: pointer to an array as hash table.
 *
 * This routine sets up the initial values to the array of hash table entries
 * for the LC HBAs.
 **/
static void
lpfc_sha_init(uint32_t * HashResultPointer)
{
        HashResultPointer[0] = 0x67452301;
        HashResultPointer[1] = 0xEFCDAB89;
        HashResultPointer[2] = 0x98BADCFE;
        HashResultPointer[3] = 0x10325476;
        HashResultPointer[4] = 0xC3D2E1F0;
}

/**
 * lpfc_sha_iterate - Iterate initial hash table with the working hash table
 * @HashResultPointer: pointer to an initial/result hash table.
 * @HashWorkingPointer: pointer to an working hash table.
 *
 * This routine iterates an initial hash table pointed by @HashResultPointer
 * with the values from the working hash table pointeed by @HashWorkingPointer.
 * The results are putting back to the initial hash table, returned through
 * the @HashResultPointer as the result hash table.
 **/
static void
lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
{
        int t;
        uint32_t TEMP;
        uint32_t A, B, C, D, E;
        t = 16;
        do {
                HashWorkingPointer[t] =
                    S(1,
                      HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
                                                                     8] ^
                      HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
        } while (++t <= 79);
        t = 0;
        A = HashResultPointer[0];
        B = HashResultPointer[1];
        C = HashResultPointer[2];
        D = HashResultPointer[3];
        E = HashResultPointer[4];

        do {
                if (t < 20) {
                        TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
                } else if (t < 40) {
                        TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
                } else if (t < 60) {
                        TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
                } else {
                        TEMP = (B ^ C ^ D) + 0xCA62C1D6;
                }
                TEMP += S(5, A) + E + HashWorkingPointer[t];
                E = D;
                D = C;
                C = S(30, B);
                B = A;
                A = TEMP;
        } while (++t <= 79);

        HashResultPointer[0] += A;
        HashResultPointer[1] += B;
        HashResultPointer[2] += C;
        HashResultPointer[3] += D;
        HashResultPointer[4] += E;

}

/**
 * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
 * @RandomChallenge: pointer to the entry of host challenge random number array.
 * @HashWorking: pointer to the entry of the working hash array.
 *
 * This routine calculates the working hash array referred by @HashWorking
 * from the challenge random numbers associated with the host, referred by
 * @RandomChallenge. The result is put into the entry of the working hash
 * array and returned by reference through @HashWorking.
 **/
static void
lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
{
        *HashWorking = (*RandomChallenge ^ *HashWorking);
}

/**
 * lpfc_hba_init - Perform special handling for LC HBA initialization
 * @phba: pointer to lpfc hba data structure.
 * @hbainit: pointer to an array of unsigned 32-bit integers.
 *
 * This routine performs the special handling for LC HBA initialization.
 **/
void
lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
{
        int t;
        uint32_t *HashWorking;
        uint32_t *pwwnn = (uint32_t *) phba->wwnn;

        HashWorking = kcalloc(80, sizeof(uint32_t), GFP_KERNEL);
        if (!HashWorking)
                return;

        HashWorking[0] = HashWorking[78] = *pwwnn++;
        HashWorking[1] = HashWorking[79] = *pwwnn;

        for (t = 0; t < 7; t++)
                lpfc_challenge_key(phba->RandomData + t, HashWorking + t);

        lpfc_sha_init(hbainit);
        lpfc_sha_iterate(hbainit, HashWorking);
        kfree(HashWorking);
}

/**
 * lpfc_cleanup - Performs vport cleanups before deleting a vport
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine performs the necessary cleanups before deleting the @vport.
 * It invokes the discovery state machine to perform necessary state
 * transitions and to release the ndlps associated with the @vport. Note,
 * the physical port is treated as @vport 0.
 **/
void
lpfc_cleanup(struct lpfc_vport *vport)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_nodelist *ndlp, *next_ndlp;
        int i = 0;

        if (phba->link_state > LPFC_LINK_DOWN)
                lpfc_port_link_failure(vport);

        /* Clean up VMID resources */
        if (lpfc_is_vmid_enabled(phba))
                lpfc_vmid_vport_cleanup(vport);

        list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
                if (vport->port_type != LPFC_PHYSICAL_PORT &&
                    ndlp->nlp_DID == Fabric_DID) {
                        /* Just free up ndlp with Fabric_DID for vports */
                        lpfc_nlp_put(ndlp);
                        continue;
                }

                if (ndlp->nlp_DID == Fabric_Cntl_DID &&
                    ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
                        lpfc_nlp_put(ndlp);
                        continue;
                }

                /* Fabric Ports not in UNMAPPED state are cleaned up in the
                 * DEVICE_RM event.
                 */
                if (ndlp->nlp_type & NLP_FABRIC &&
                    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE)
                        lpfc_disc_state_machine(vport, ndlp, NULL,
                                        NLP_EVT_DEVICE_RECOVERY);

                if (!(ndlp->fc4_xpt_flags & (NVME_XPT_REGD|SCSI_XPT_REGD)))
                        lpfc_disc_state_machine(vport, ndlp, NULL,
                                        NLP_EVT_DEVICE_RM);
        }

        /* This is a special case flush to return all
         * IOs before entering this loop. There are
         * two points in the code where a flush is
         * avoided if the FC_UNLOADING flag is set.
         * one is in the multipool destroy,
         * (this prevents a crash) and the other is
         * in the nvme abort handler, ( also prevents
         * a crash). Both of these exceptions are
         * cases where the slot is still accessible.
         * The flush here is only when the pci slot
         * is offline.
         */
        if (test_bit(FC_UNLOADING, &vport->load_flag) &&
            pci_channel_offline(phba->pcidev))
                lpfc_sli_flush_io_rings(vport->phba);

        /* At this point, ALL ndlp's should be gone
         * because of the previous NLP_EVT_DEVICE_RM.
         * Lets wait for this to happen, if needed.
         */
        while (!list_empty(&vport->fc_nodes)) {
                if (i++ > 3000) {
                        lpfc_printf_vlog(vport, KERN_ERR,
                                         LOG_TRACE_EVENT,
                                "0233 Nodelist not empty\n");
                        list_for_each_entry_safe(ndlp, next_ndlp,
                                                &vport->fc_nodes, nlp_listp) {
                                lpfc_printf_vlog(ndlp->vport, KERN_ERR,
                                                 LOG_DISCOVERY,
                                                 "0282 did:x%x ndlp:x%px "
                                                 "refcnt:%d xflags x%x nflag x%x\n",
                                                 ndlp->nlp_DID, (void *)ndlp,
                                                 kref_read(&ndlp->kref),
                                                 ndlp->fc4_xpt_flags,
                                                 ndlp->nlp_flag);
                        }
                        break;
                }

                /* Wait for any activity on ndlps to settle */
                msleep(10);
        }
        lpfc_cleanup_vports_rrqs(vport, NULL);
}

/**
 * lpfc_stop_vport_timers - Stop all the timers associated with a vport
 * @vport: pointer to a virtual N_Port data structure.
 *
 * This routine stops all the timers associated with a @vport. This function
 * is invoked before disabling or deleting a @vport. Note that the physical
 * port is treated as @vport 0.
 **/
void
lpfc_stop_vport_timers(struct lpfc_vport *vport)
{
        del_timer_sync(&vport->els_tmofunc);
        del_timer_sync(&vport->delayed_disc_tmo);
        lpfc_can_disctmo(vport);
        return;
}

/**
 * __lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine stops the SLI4 FCF rediscover wait timer if it's on. The
 * caller of this routine should already hold the host lock.
 **/
void
__lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
{
        /* Clear pending FCF rediscovery wait flag */
        phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;

        /* Now, try to stop the timer */
        del_timer(&phba->fcf.redisc_wait);
}

/**
 * lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine stops the SLI4 FCF rediscover wait timer if it's on. It
 * checks whether the FCF rediscovery wait timer is pending with the host
 * lock held before proceeding with disabling the timer and clearing the
 * wait timer pendig flag.
 **/
void
lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba)
{
        spin_lock_irq(&phba->hbalock);
        if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
                /* FCF rediscovery timer already fired or stopped */
                spin_unlock_irq(&phba->hbalock);
                return;
        }
        __lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
        /* Clear failover in progress flags */
        phba->fcf.fcf_flag &= ~(FCF_DEAD_DISC | FCF_ACVL_DISC);
        spin_unlock_irq(&phba->hbalock);
}

/**
 * lpfc_cmf_stop - Stop CMF processing
 * @phba: pointer to lpfc hba data structure.
 *
 * This is called when the link goes down or if CMF mode is turned OFF.
 * It is also called when going offline or unloaded just before the
 * congestion info buffer is unregistered.
 **/
void
lpfc_cmf_stop(struct lpfc_hba *phba)
{
        int cpu;
        struct lpfc_cgn_stat *cgs;

        /* We only do something if CMF is enabled */
        if (!phba->sli4_hba.pc_sli4_params.cmf)
                return;

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "6221 Stop CMF / Cancel Timer\n");

        /* Cancel the CMF timer */
        hrtimer_cancel(&phba->cmf_stats_timer);
        hrtimer_cancel(&phba->cmf_timer);

        /* Zero CMF counters */
        atomic_set(&phba->cmf_busy, 0);
        for_each_present_cpu(cpu) {
                cgs = per_cpu_ptr(phba->cmf_stat, cpu);
                atomic64_set(&cgs->total_bytes, 0);
                atomic64_set(&cgs->rcv_bytes, 0);
                atomic_set(&cgs->rx_io_cnt, 0);
                atomic64_set(&cgs->rx_latency, 0);
        }
        atomic_set(&phba->cmf_bw_wait, 0);

        /* Resume any blocked IO - Queue unblock on workqueue */
        queue_work(phba->wq, &phba->unblock_request_work);
}

static inline uint64_t
lpfc_get_max_line_rate(struct lpfc_hba *phba)
{
        uint64_t rate = lpfc_sli_port_speed_get(phba);

        return ((((unsigned long)rate) * 1024 * 1024) / 10);
}

void
lpfc_cmf_signal_init(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "6223 Signal CMF init\n");

        /* Use the new fc_linkspeed to recalculate */
        phba->cmf_interval_rate = LPFC_CMF_INTERVAL;
        phba->cmf_max_line_rate = lpfc_get_max_line_rate(phba);
        phba->cmf_link_byte_count = div_u64(phba->cmf_max_line_rate *
                                            phba->cmf_interval_rate, 1000);
        phba->cmf_max_bytes_per_interval = phba->cmf_link_byte_count;

        /* This is a signal to firmware to sync up CMF BW with link speed */
        lpfc_issue_cmf_sync_wqe(phba, 0, 0);
}

/**
 * lpfc_cmf_start - Start CMF processing
 * @phba: pointer to lpfc hba data structure.
 *
 * This is called when the link comes up or if CMF mode is turned OFF
 * to Monitor or Managed.
 **/
void
lpfc_cmf_start(struct lpfc_hba *phba)
{
        struct lpfc_cgn_stat *cgs;
        int cpu;

        /* We only do something if CMF is enabled */
        if (!phba->sli4_hba.pc_sli4_params.cmf ||
            phba->cmf_active_mode == LPFC_CFG_OFF)
                return;

        /* Reinitialize congestion buffer info */
        lpfc_init_congestion_buf(phba);

        atomic_set(&phba->cgn_fabric_warn_cnt, 0);
        atomic_set(&phba->cgn_fabric_alarm_cnt, 0);
        atomic_set(&phba->cgn_sync_alarm_cnt, 0);
        atomic_set(&phba->cgn_sync_warn_cnt, 0);

        atomic_set(&phba->cmf_busy, 0);
        for_each_present_cpu(cpu) {
                cgs = per_cpu_ptr(phba->cmf_stat, cpu);
                atomic64_set(&cgs->total_bytes, 0);
                atomic64_set(&cgs->rcv_bytes, 0);
                atomic_set(&cgs->rx_io_cnt, 0);
                atomic64_set(&cgs->rx_latency, 0);
        }
        phba->cmf_latency.tv_sec = 0;
        phba->cmf_latency.tv_nsec = 0;

        lpfc_cmf_signal_init(phba);

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "6222 Start CMF / Timer\n");

        phba->cmf_timer_cnt = 0;
        hrtimer_start(&phba->cmf_timer,
                      ktime_set(0, LPFC_CMF_INTERVAL * NSEC_PER_MSEC),
                      HRTIMER_MODE_REL);
        hrtimer_start(&phba->cmf_stats_timer,
                      ktime_set(0, LPFC_SEC_MIN * NSEC_PER_SEC),
                      HRTIMER_MODE_REL);
        /* Setup for latency check in IO cmpl routines */
        ktime_get_real_ts64(&phba->cmf_latency);

        atomic_set(&phba->cmf_bw_wait, 0);
        atomic_set(&phba->cmf_stop_io, 0);
}

/**
 * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine stops all the timers associated with a HBA. This function is
 * invoked before either putting a HBA offline or unloading the driver.
 **/
void
lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
        if (phba->pport)
                lpfc_stop_vport_timers(phba->pport);
        cancel_delayed_work_sync(&phba->eq_delay_work);
        cancel_delayed_work_sync(&phba->idle_stat_delay_work);
        del_timer_sync(&phba->sli.mbox_tmo);
        del_timer_sync(&phba->fabric_block_timer);
        del_timer_sync(&phba->eratt_poll);
        del_timer_sync(&phba->hb_tmofunc);
        if (phba->sli_rev == LPFC_SLI_REV4) {
                del_timer_sync(&phba->rrq_tmr);
                phba->hba_flag &= ~HBA_RRQ_ACTIVE;
        }
        phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO);

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                /* Stop any LightPulse device specific driver timers */
                del_timer_sync(&phba->fcp_poll_timer);
                break;
        case LPFC_PCI_DEV_OC:
                /* Stop any OneConnect device specific driver timers */
                lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0297 Invalid device group (x%x)\n",
                                phba->pci_dev_grp);
                break;
        }
        return;
}

/**
 * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
 * @phba: pointer to lpfc hba data structure.
 * @mbx_action: flag for mailbox no wait action.
 *
 * This routine marks a HBA's management interface as blocked. Once the HBA's
 * management interface is marked as blocked, all the user space access to
 * the HBA, whether they are from sysfs interface or libdfc interface will
 * all be blocked. The HBA is set to block the management interface when the
 * driver prepares the HBA interface for online or offline.
 **/
static void
lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action)
{
        unsigned long iflag;
        uint8_t actcmd = MBX_HEARTBEAT;
        unsigned long timeout;

        spin_lock_irqsave(&phba->hbalock, iflag);
        phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO;
        spin_unlock_irqrestore(&phba->hbalock, iflag);
        if (mbx_action == LPFC_MBX_NO_WAIT)
                return;
        timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
        spin_lock_irqsave(&phba->hbalock, iflag);
        if (phba->sli.mbox_active) {
                actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
                /* Determine how long we might wait for the active mailbox
                 * command to be gracefully completed by firmware.
                 */
                timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
                                phba->sli.mbox_active) * 1000) + jiffies;
        }
        spin_unlock_irqrestore(&phba->hbalock, iflag);

        /* Wait for the outstnading mailbox command to complete */
        while (phba->sli.mbox_active) {
                /* Check active mailbox complete status every 2ms */
                msleep(2);
                if (time_after(jiffies, timeout)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2813 Mgmt IO is Blocked %x "
                                        "- mbox cmd %x still active\n",
                                        phba->sli.sli_flag, actcmd);
                        break;
                }
        }
}

/**
 * lpfc_sli4_node_prep - Assign RPIs for active nodes.
 * @phba: pointer to lpfc hba data structure.
 *
 * Allocate RPIs for all active remote nodes. This is needed whenever
 * an SLI4 adapter is reset and the driver is not unloading. Its purpose
 * is to fixup the temporary rpi assignments.
 **/
void
lpfc_sli4_node_prep(struct lpfc_hba *phba)
{
        struct lpfc_nodelist  *ndlp, *next_ndlp;
        struct lpfc_vport **vports;
        int i, rpi;

        if (phba->sli_rev != LPFC_SLI_REV4)
                return;

        vports = lpfc_create_vport_work_array(phba);
        if (vports == NULL)
                return;

        for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                if (test_bit(FC_UNLOADING, &vports[i]->load_flag))
                        continue;

                list_for_each_entry_safe(ndlp, next_ndlp,
                                         &vports[i]->fc_nodes,
                                         nlp_listp) {
                        rpi = lpfc_sli4_alloc_rpi(phba);
                        if (rpi == LPFC_RPI_ALLOC_ERROR) {
                                /* TODO print log? */
                                continue;
                        }
                        ndlp->nlp_rpi = rpi;
                        lpfc_printf_vlog(ndlp->vport, KERN_INFO,
                                         LOG_NODE | LOG_DISCOVERY,
                                         "0009 Assign RPI x%x to ndlp x%px "
                                         "DID:x%06x flg:x%x\n",
                                         ndlp->nlp_rpi, ndlp, ndlp->nlp_DID,
                                         ndlp->nlp_flag);
                }
        }
        lpfc_destroy_vport_work_array(phba, vports);
}

/**
 * lpfc_create_expedite_pool - create expedite pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine moves a batch of XRIs from lpfc_io_buf_list_put of HWQ 0
 * to expedite pool. Mark them as expedite.
 **/
static void lpfc_create_expedite_pool(struct lpfc_hba *phba)
{
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_io_buf *lpfc_ncmd;
        struct lpfc_io_buf *lpfc_ncmd_next;
        struct lpfc_epd_pool *epd_pool;
        unsigned long iflag;

        epd_pool = &phba->epd_pool;
        qp = &phba->sli4_hba.hdwq[0];

        spin_lock_init(&epd_pool->lock);
        spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
        spin_lock(&epd_pool->lock);
        INIT_LIST_HEAD(&epd_pool->list);
        list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                 &qp->lpfc_io_buf_list_put, list) {
                list_move_tail(&lpfc_ncmd->list, &epd_pool->list);
                lpfc_ncmd->expedite = true;
                qp->put_io_bufs--;
                epd_pool->count++;
                if (epd_pool->count >= XRI_BATCH)
                        break;
        }
        spin_unlock(&epd_pool->lock);
        spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
}

/**
 * lpfc_destroy_expedite_pool - destroy expedite pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine returns XRIs from expedite pool to lpfc_io_buf_list_put
 * of HWQ 0. Clear the mark.
 **/
static void lpfc_destroy_expedite_pool(struct lpfc_hba *phba)
{
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_io_buf *lpfc_ncmd;
        struct lpfc_io_buf *lpfc_ncmd_next;
        struct lpfc_epd_pool *epd_pool;
        unsigned long iflag;

        epd_pool = &phba->epd_pool;
        qp = &phba->sli4_hba.hdwq[0];

        spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
        spin_lock(&epd_pool->lock);
        list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                 &epd_pool->list, list) {
                list_move_tail(&lpfc_ncmd->list,
                               &qp->lpfc_io_buf_list_put);
                lpfc_ncmd->flags = false;
                qp->put_io_bufs++;
                epd_pool->count--;
        }
        spin_unlock(&epd_pool->lock);
        spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);
}

/**
 * lpfc_create_multixri_pools - create multi-XRI pools
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine initialize public, private per HWQ. Then, move XRIs from
 * lpfc_io_buf_list_put to public pool. High and low watermark are also
 * Initialized.
 **/
void lpfc_create_multixri_pools(struct lpfc_hba *phba)
{
        u32 i, j;
        u32 hwq_count;
        u32 count_per_hwq;
        struct lpfc_io_buf *lpfc_ncmd;
        struct lpfc_io_buf *lpfc_ncmd_next;
        unsigned long iflag;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;
        struct lpfc_pbl_pool *pbl_pool;
        struct lpfc_pvt_pool *pvt_pool;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "1234 num_hdw_queue=%d num_present_cpu=%d common_xri_cnt=%d\n",
                        phba->cfg_hdw_queue, phba->sli4_hba.num_present_cpu,
                        phba->sli4_hba.io_xri_cnt);

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                lpfc_create_expedite_pool(phba);

        hwq_count = phba->cfg_hdw_queue;
        count_per_hwq = phba->sli4_hba.io_xri_cnt / hwq_count;

        for (i = 0; i < hwq_count; i++) {
                multixri_pool = kzalloc(sizeof(*multixri_pool), GFP_KERNEL);

                if (!multixri_pool) {
                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "1238 Failed to allocate memory for "
                                        "multixri_pool\n");

                        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                                lpfc_destroy_expedite_pool(phba);

                        j = 0;
                        while (j < i) {
                                qp = &phba->sli4_hba.hdwq[j];
                                kfree(qp->p_multixri_pool);
                                j++;
                        }
                        phba->cfg_xri_rebalancing = 0;
                        return;
                }

                qp = &phba->sli4_hba.hdwq[i];
                qp->p_multixri_pool = multixri_pool;

                multixri_pool->xri_limit = count_per_hwq;
                multixri_pool->rrb_next_hwqid = i;

                /* Deal with public free xri pool */
                pbl_pool = &multixri_pool->pbl_pool;
                spin_lock_init(&pbl_pool->lock);
                spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);
                spin_lock(&pbl_pool->lock);
                INIT_LIST_HEAD(&pbl_pool->list);
                list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                         &qp->lpfc_io_buf_list_put, list) {
                        list_move_tail(&lpfc_ncmd->list, &pbl_pool->list);
                        qp->put_io_bufs--;
                        pbl_pool->count++;
                }
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "1235 Moved %d buffers from PUT list over to pbl_pool[%d]\n",
                                pbl_pool->count, i);
                spin_unlock(&pbl_pool->lock);
                spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);

                /* Deal with private free xri pool */
                pvt_pool = &multixri_pool->pvt_pool;
                pvt_pool->high_watermark = multixri_pool->xri_limit / 2;
                pvt_pool->low_watermark = XRI_BATCH;
                spin_lock_init(&pvt_pool->lock);
                spin_lock_irqsave(&pvt_pool->lock, iflag);
                INIT_LIST_HEAD(&pvt_pool->list);
                pvt_pool->count = 0;
                spin_unlock_irqrestore(&pvt_pool->lock, iflag);
        }
}

/**
 * lpfc_destroy_multixri_pools - destroy multi-XRI pools
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine returns XRIs from public/private to lpfc_io_buf_list_put.
 **/
static void lpfc_destroy_multixri_pools(struct lpfc_hba *phba)
{
        u32 i;
        u32 hwq_count;
        struct lpfc_io_buf *lpfc_ncmd;
        struct lpfc_io_buf *lpfc_ncmd_next;
        unsigned long iflag;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;
        struct lpfc_pbl_pool *pbl_pool;
        struct lpfc_pvt_pool *pvt_pool;

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                lpfc_destroy_expedite_pool(phba);

        if (!test_bit(FC_UNLOADING, &phba->pport->load_flag))
                lpfc_sli_flush_io_rings(phba);

        hwq_count = phba->cfg_hdw_queue;

        for (i = 0; i < hwq_count; i++) {
                qp = &phba->sli4_hba.hdwq[i];
                multixri_pool = qp->p_multixri_pool;
                if (!multixri_pool)
                        continue;

                qp->p_multixri_pool = NULL;

                spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag);

                /* Deal with public free xri pool */
                pbl_pool = &multixri_pool->pbl_pool;
                spin_lock(&pbl_pool->lock);

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "1236 Moving %d buffers from pbl_pool[%d] TO PUT list\n",
                                pbl_pool->count, i);

                list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                         &pbl_pool->list, list) {
                        list_move_tail(&lpfc_ncmd->list,
                                       &qp->lpfc_io_buf_list_put);
                        qp->put_io_bufs++;
                        pbl_pool->count--;
                }

                INIT_LIST_HEAD(&pbl_pool->list);
                pbl_pool->count = 0;

                spin_unlock(&pbl_pool->lock);

                /* Deal with private free xri pool */
                pvt_pool = &multixri_pool->pvt_pool;
                spin_lock(&pvt_pool->lock);

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "1237 Moving %d buffers from pvt_pool[%d] TO PUT list\n",
                                pvt_pool->count, i);

                list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                         &pvt_pool->list, list) {
                        list_move_tail(&lpfc_ncmd->list,
                                       &qp->lpfc_io_buf_list_put);
                        qp->put_io_bufs++;
                        pvt_pool->count--;
                }

                INIT_LIST_HEAD(&pvt_pool->list);
                pvt_pool->count = 0;

                spin_unlock(&pvt_pool->lock);
                spin_unlock_irqrestore(&qp->io_buf_list_put_lock, iflag);

                kfree(multixri_pool);
        }
}

/**
 * lpfc_online - Initialize and bring a HBA online
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine initializes the HBA and brings a HBA online. During this
 * process, the management interface is blocked to prevent user space access
 * to the HBA interfering with the driver initialization.
 *
 * Return codes
 *   0 - successful
 *   1 - failed
 **/
int
lpfc_online(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport;
        struct lpfc_vport **vports;
        int i, error = 0;
        bool vpis_cleared = false;

        if (!phba)
                return 0;
        vport = phba->pport;

        if (!test_bit(FC_OFFLINE_MODE, &vport->fc_flag))
                return 0;

        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                        "0458 Bring Adapter online\n");

        lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);

        if (phba->sli_rev == LPFC_SLI_REV4) {
                if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
                        lpfc_unblock_mgmt_io(phba);
                        return 1;
                }
                spin_lock_irq(&phba->hbalock);
                if (!phba->sli4_hba.max_cfg_param.vpi_used)
                        vpis_cleared = true;
                spin_unlock_irq(&phba->hbalock);

                /* Reestablish the local initiator port.
                 * The offline process destroyed the previous lport.
                 */
                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&
                                !phba->nvmet_support) {
                        error = lpfc_nvme_create_localport(phba->pport);
                        if (error)
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6132 NVME restore reg failed "
                                        "on nvmei error x%x\n", error);
                }
        } else {
                lpfc_sli_queue_init(phba);
                if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
                        lpfc_unblock_mgmt_io(phba);
                        return 1;
                }
        }

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL) {
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        clear_bit(FC_OFFLINE_MODE, &vports[i]->fc_flag);
                        if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
                                set_bit(FC_VPORT_NEEDS_REG_VPI,
                                        &vports[i]->fc_flag);
                        if (phba->sli_rev == LPFC_SLI_REV4) {
                                set_bit(FC_VPORT_NEEDS_INIT_VPI,
                                        &vports[i]->fc_flag);
                                if ((vpis_cleared) &&
                                    (vports[i]->port_type !=
                                        LPFC_PHYSICAL_PORT))
                                        vports[i]->vpi = 0;
                        }
                }
        }
        lpfc_destroy_vport_work_array(phba, vports);

        if (phba->cfg_xri_rebalancing)
                lpfc_create_multixri_pools(phba);

        lpfc_cpuhp_add(phba);

        lpfc_unblock_mgmt_io(phba);
        return 0;
}

/**
 * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine marks a HBA's management interface as not blocked. Once the
 * HBA's management interface is marked as not blocked, all the user space
 * access to the HBA, whether they are from sysfs interface or libdfc
 * interface will be allowed. The HBA is set to block the management interface
 * when the driver prepares the HBA interface for online or offline and then
 * set to unblock the management interface afterwards.
 **/
void
lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
{
        unsigned long iflag;

        spin_lock_irqsave(&phba->hbalock, iflag);
        phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO;
        spin_unlock_irqrestore(&phba->hbalock, iflag);
}

/**
 * lpfc_offline_prep - Prepare a HBA to be brought offline
 * @phba: pointer to lpfc hba data structure.
 * @mbx_action: flag for mailbox shutdown action.
 *
 * This routine is invoked to prepare a HBA to be brought offline. It performs
 * unregistration login to all the nodes on all vports and flushes the mailbox
 * queue to make it ready to be brought offline.
 **/
void
lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
{
        struct lpfc_vport *vport = phba->pport;
        struct lpfc_nodelist  *ndlp, *next_ndlp;
        struct lpfc_vport **vports;
        struct Scsi_Host *shost;
        int i;
        int offline;
        bool hba_pci_err;

        if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag))
                return;

        lpfc_block_mgmt_io(phba, mbx_action);

        lpfc_linkdown(phba);

        offline =  pci_channel_offline(phba->pcidev);
        hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags);

        /* Issue an unreg_login to all nodes on all vports */
        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL) {
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        if (test_bit(FC_UNLOADING, &vports[i]->load_flag))
                                continue;
                        shost = lpfc_shost_from_vport(vports[i]);
                        spin_lock_irq(shost->host_lock);
                        vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
                        spin_unlock_irq(shost->host_lock);
                        set_bit(FC_VPORT_NEEDS_REG_VPI, &vports[i]->fc_flag);
                        clear_bit(FC_VFI_REGISTERED, &vports[i]->fc_flag);

                        list_for_each_entry_safe(ndlp, next_ndlp,
                                                 &vports[i]->fc_nodes,
                                                 nlp_listp) {

                                spin_lock_irq(&ndlp->lock);
                                ndlp->nlp_flag &= ~NLP_NPR_ADISC;
                                spin_unlock_irq(&ndlp->lock);

                                if (offline || hba_pci_err) {
                                        spin_lock_irq(&ndlp->lock);
                                        ndlp->nlp_flag &= ~(NLP_UNREG_INP |
                                                            NLP_RPI_REGISTERED);
                                        spin_unlock_irq(&ndlp->lock);
                                        if (phba->sli_rev == LPFC_SLI_REV4)
                                                lpfc_sli_rpi_release(vports[i],
                                                                     ndlp);
                                } else {
                                        lpfc_unreg_rpi(vports[i], ndlp);
                                }
                                /*
                                 * Whenever an SLI4 port goes offline, free the
                                 * RPI. Get a new RPI when the adapter port
                                 * comes back online.
                                 */
                                if (phba->sli_rev == LPFC_SLI_REV4) {
                                        lpfc_printf_vlog(vports[i], KERN_INFO,
                                                 LOG_NODE | LOG_DISCOVERY,
                                                 "0011 Free RPI x%x on "
                                                 "ndlp: x%px did x%x\n",
                                                 ndlp->nlp_rpi, ndlp,
                                                 ndlp->nlp_DID);
                                        lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
                                        ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
                                }

                                if (ndlp->nlp_type & NLP_FABRIC) {
                                        lpfc_disc_state_machine(vports[i], ndlp,
                                                NULL, NLP_EVT_DEVICE_RECOVERY);

                                        /* Don't remove the node unless the node
                                         * has been unregistered with the
                                         * transport, and we're not in recovery
                                         * before dev_loss_tmo triggered.
                                         * Otherwise, let dev_loss take care of
                                         * the node.
                                         */
                                        if (!(ndlp->save_flags &
                                              NLP_IN_RECOV_POST_DEV_LOSS) &&
                                            !(ndlp->fc4_xpt_flags &
                                              (NVME_XPT_REGD | SCSI_XPT_REGD)))
                                                lpfc_disc_state_machine
                                                        (vports[i], ndlp,
                                                         NULL,
                                                         NLP_EVT_DEVICE_RM);
                                }
                        }
                }
        }
        lpfc_destroy_vport_work_array(phba, vports);

        lpfc_sli_mbox_sys_shutdown(phba, mbx_action);

        if (phba->wq)
                flush_workqueue(phba->wq);
}

/**
 * lpfc_offline - Bring a HBA offline
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine actually brings a HBA offline. It stops all the timers
 * associated with the HBA, brings down the SLI layer, and eventually
 * marks the HBA as in offline state for the upper layer protocol.
 **/
void
lpfc_offline(struct lpfc_hba *phba)
{
        struct Scsi_Host  *shost;
        struct lpfc_vport **vports;
        int i;

        if (test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
                return;

        /* stop port and all timers associated with this hba */
        lpfc_stop_port(phba);

        /* Tear down the local and target port registrations.  The
         * nvme transports need to cleanup.
         */
        lpfc_nvmet_destroy_targetport(phba);
        lpfc_nvme_destroy_localport(phba->pport);

        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
                        lpfc_stop_vport_timers(vports[i]);
        lpfc_destroy_vport_work_array(phba, vports);
        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                        "0460 Bring Adapter offline\n");
        /* Bring down the SLI Layer and cleanup.  The HBA is offline
           now.  */
        lpfc_sli_hba_down(phba);
        spin_lock_irq(&phba->hbalock);
        phba->work_ha = 0;
        spin_unlock_irq(&phba->hbalock);
        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        shost = lpfc_shost_from_vport(vports[i]);
                        spin_lock_irq(shost->host_lock);
                        vports[i]->work_port_events = 0;
                        spin_unlock_irq(shost->host_lock);
                        set_bit(FC_OFFLINE_MODE, &vports[i]->fc_flag);
                }
        lpfc_destroy_vport_work_array(phba, vports);
        /* If OFFLINE flag is clear (i.e. unloading), cpuhp removal is handled
         * in hba_unset
         */
        if (test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
                __lpfc_cpuhp_remove(phba);

        if (phba->cfg_xri_rebalancing)
                lpfc_destroy_multixri_pools(phba);
}

/**
 * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the SCSI buffers and IOCBs from the driver
 * list back to kernel. It is called from lpfc_pci_remove_one to free
 * the internal resources before the device is removed from the system.
 **/
static void
lpfc_scsi_free(struct lpfc_hba *phba)
{
        struct lpfc_io_buf *sb, *sb_next;

        if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
                return;

        spin_lock_irq(&phba->hbalock);

        /* Release all the lpfc_scsi_bufs maintained by this host. */

        spin_lock(&phba->scsi_buf_list_put_lock);
        list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_put,
                                 list) {
                list_del(&sb->list);
                dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
                              sb->dma_handle);
                kfree(sb);
                phba->total_scsi_bufs--;
        }
        spin_unlock(&phba->scsi_buf_list_put_lock);

        spin_lock(&phba->scsi_buf_list_get_lock);
        list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_get,
                                 list) {
                list_del(&sb->list);
                dma_pool_free(phba->lpfc_sg_dma_buf_pool, sb->data,
                              sb->dma_handle);
                kfree(sb);
                phba->total_scsi_bufs--;
        }
        spin_unlock(&phba->scsi_buf_list_get_lock);
        spin_unlock_irq(&phba->hbalock);
}

/**
 * lpfc_io_free - Free all the IO buffers and IOCBs from driver lists
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the IO buffers and IOCBs from the driver
 * list back to kernel. It is called from lpfc_pci_remove_one to free
 * the internal resources before the device is removed from the system.
 **/
void
lpfc_io_free(struct lpfc_hba *phba)
{
        struct lpfc_io_buf *lpfc_ncmd, *lpfc_ncmd_next;
        struct lpfc_sli4_hdw_queue *qp;
        int idx;

        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                qp = &phba->sli4_hba.hdwq[idx];
                /* Release all the lpfc_nvme_bufs maintained by this host. */
                spin_lock(&qp->io_buf_list_put_lock);
                list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                         &qp->lpfc_io_buf_list_put,
                                         list) {
                        list_del(&lpfc_ncmd->list);
                        qp->put_io_bufs--;
                        dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
                        if (phba->cfg_xpsgl && !phba->nvmet_support)
                                lpfc_put_sgl_per_hdwq(phba, lpfc_ncmd);
                        lpfc_put_cmd_rsp_buf_per_hdwq(phba, lpfc_ncmd);
                        kfree(lpfc_ncmd);
                        qp->total_io_bufs--;
                }
                spin_unlock(&qp->io_buf_list_put_lock);

                spin_lock(&qp->io_buf_list_get_lock);
                list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                         &qp->lpfc_io_buf_list_get,
                                         list) {
                        list_del(&lpfc_ncmd->list);
                        qp->get_io_bufs--;
                        dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
                        if (phba->cfg_xpsgl && !phba->nvmet_support)
                                lpfc_put_sgl_per_hdwq(phba, lpfc_ncmd);
                        lpfc_put_cmd_rsp_buf_per_hdwq(phba, lpfc_ncmd);
                        kfree(lpfc_ncmd);
                        qp->total_io_bufs--;
                }
                spin_unlock(&qp->io_buf_list_get_lock);
        }
}

/**
 * lpfc_sli4_els_sgl_update - update ELS xri-sgl sizing and mapping
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine first calculates the sizes of the current els and allocated
 * scsi sgl lists, and then goes through all sgls to updates the physical
 * XRIs assigned due to port function reset. During port initialization, the
 * current els and allocated scsi sgl lists are 0s.
 *
 * Return codes
 *   0 - successful (for now, it always returns 0)
 **/
int
lpfc_sli4_els_sgl_update(struct lpfc_hba *phba)
{
        struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
        uint16_t i, lxri, xri_cnt, els_xri_cnt;
        LIST_HEAD(els_sgl_list);
        int rc;

        /*
         * update on pci function's els xri-sgl list
         */
        els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);

        if (els_xri_cnt > phba->sli4_hba.els_xri_cnt) {
                /* els xri-sgl expanded */
                xri_cnt = els_xri_cnt - phba->sli4_hba.els_xri_cnt;
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3157 ELS xri-sgl count increased from "
                                "%d to %d\n", phba->sli4_hba.els_xri_cnt,
                                els_xri_cnt);
                /* allocate the additional els sgls */
                for (i = 0; i < xri_cnt; i++) {
                        sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
                                             GFP_KERNEL);
                        if (sglq_entry == NULL) {
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "2562 Failure to allocate an "
                                                "ELS sgl entry:%d\n", i);
                                rc = -ENOMEM;
                                goto out_free_mem;
                        }
                        sglq_entry->buff_type = GEN_BUFF_TYPE;
                        sglq_entry->virt = lpfc_mbuf_alloc(phba, 0,
                                                           &sglq_entry->phys);
                        if (sglq_entry->virt == NULL) {
                                kfree(sglq_entry);
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "2563 Failure to allocate an "
                                                "ELS mbuf:%d\n", i);
                                rc = -ENOMEM;
                                goto out_free_mem;
                        }
                        sglq_entry->sgl = sglq_entry->virt;
                        memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
                        sglq_entry->state = SGL_FREED;
                        list_add_tail(&sglq_entry->list, &els_sgl_list);
                }
                spin_lock_irq(&phba->sli4_hba.sgl_list_lock);
                list_splice_init(&els_sgl_list,
                                 &phba->sli4_hba.lpfc_els_sgl_list);
                spin_unlock_irq(&phba->sli4_hba.sgl_list_lock);
        } else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) {
                /* els xri-sgl shrinked */
                xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt;
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3158 ELS xri-sgl count decreased from "
                                "%d to %d\n", phba->sli4_hba.els_xri_cnt,
                                els_xri_cnt);
                spin_lock_irq(&phba->sli4_hba.sgl_list_lock);
                list_splice_init(&phba->sli4_hba.lpfc_els_sgl_list,
                                 &els_sgl_list);
                /* release extra els sgls from list */
                for (i = 0; i < xri_cnt; i++) {
                        list_remove_head(&els_sgl_list,
                                         sglq_entry, struct lpfc_sglq, list);
                        if (sglq_entry) {
                                __lpfc_mbuf_free(phba, sglq_entry->virt,
                                                 sglq_entry->phys);
                                kfree(sglq_entry);
                        }
                }
                list_splice_init(&els_sgl_list,
                                 &phba->sli4_hba.lpfc_els_sgl_list);
                spin_unlock_irq(&phba->sli4_hba.sgl_list_lock);
        } else
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3163 ELS xri-sgl count unchanged: %d\n",
                                els_xri_cnt);
        phba->sli4_hba.els_xri_cnt = els_xri_cnt;

        /* update xris to els sgls on the list */
        sglq_entry = NULL;
        sglq_entry_next = NULL;
        list_for_each_entry_safe(sglq_entry, sglq_entry_next,
                                 &phba->sli4_hba.lpfc_els_sgl_list, list) {
                lxri = lpfc_sli4_next_xritag(phba);
                if (lxri == NO_XRI) {
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "2400 Failed to allocate xri for "
                                        "ELS sgl\n");
                        rc = -ENOMEM;
                        goto out_free_mem;
                }
                sglq_entry->sli4_lxritag = lxri;
                sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
        }
        return 0;

out_free_mem:
        lpfc_free_els_sgl_list(phba);
        return rc;
}

/**
 * lpfc_sli4_nvmet_sgl_update - update xri-sgl sizing and mapping
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine first calculates the sizes of the current els and allocated
 * scsi sgl lists, and then goes through all sgls to updates the physical
 * XRIs assigned due to port function reset. During port initialization, the
 * current els and allocated scsi sgl lists are 0s.
 *
 * Return codes
 *   0 - successful (for now, it always returns 0)
 **/
int
lpfc_sli4_nvmet_sgl_update(struct lpfc_hba *phba)
{
        struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL;
        uint16_t i, lxri, xri_cnt, els_xri_cnt;
        uint16_t nvmet_xri_cnt;
        LIST_HEAD(nvmet_sgl_list);
        int rc;

        /*
         * update on pci function's nvmet xri-sgl list
         */
        els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);

        /* For NVMET, ALL remaining XRIs are dedicated for IO processing */
        nvmet_xri_cnt = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
        if (nvmet_xri_cnt > phba->sli4_hba.nvmet_xri_cnt) {
                /* els xri-sgl expanded */
                xri_cnt = nvmet_xri_cnt - phba->sli4_hba.nvmet_xri_cnt;
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "6302 NVMET xri-sgl cnt grew from %d to %d\n",
                                phba->sli4_hba.nvmet_xri_cnt, nvmet_xri_cnt);
                /* allocate the additional nvmet sgls */
                for (i = 0; i < xri_cnt; i++) {
                        sglq_entry = kzalloc(sizeof(struct lpfc_sglq),
                                             GFP_KERNEL);
                        if (sglq_entry == NULL) {
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "6303 Failure to allocate an "
                                                "NVMET sgl entry:%d\n", i);
                                rc = -ENOMEM;
                                goto out_free_mem;
                        }
                        sglq_entry->buff_type = NVMET_BUFF_TYPE;
                        sglq_entry->virt = lpfc_nvmet_buf_alloc(phba, 0,
                                                           &sglq_entry->phys);
                        if (sglq_entry->virt == NULL) {
                                kfree(sglq_entry);
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "6304 Failure to allocate an "
                                                "NVMET buf:%d\n", i);
                                rc = -ENOMEM;
                                goto out_free_mem;
                        }
                        sglq_entry->sgl = sglq_entry->virt;
                        memset(sglq_entry->sgl, 0,
                               phba->cfg_sg_dma_buf_size);
                        sglq_entry->state = SGL_FREED;
                        list_add_tail(&sglq_entry->list, &nvmet_sgl_list);
                }
                spin_lock_irq(&phba->hbalock);
                spin_lock(&phba->sli4_hba.sgl_list_lock);
                list_splice_init(&nvmet_sgl_list,
                                 &phba->sli4_hba.lpfc_nvmet_sgl_list);
                spin_unlock(&phba->sli4_hba.sgl_list_lock);
                spin_unlock_irq(&phba->hbalock);
        } else if (nvmet_xri_cnt < phba->sli4_hba.nvmet_xri_cnt) {
                /* nvmet xri-sgl shrunk */
                xri_cnt = phba->sli4_hba.nvmet_xri_cnt - nvmet_xri_cnt;
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "6305 NVMET xri-sgl count decreased from "
                                "%d to %d\n", phba->sli4_hba.nvmet_xri_cnt,
                                nvmet_xri_cnt);
                spin_lock_irq(&phba->hbalock);
                spin_lock(&phba->sli4_hba.sgl_list_lock);
                list_splice_init(&phba->sli4_hba.lpfc_nvmet_sgl_list,
                                 &nvmet_sgl_list);
                /* release extra nvmet sgls from list */
                for (i = 0; i < xri_cnt; i++) {
                        list_remove_head(&nvmet_sgl_list,
                                         sglq_entry, struct lpfc_sglq, list);
                        if (sglq_entry) {
                                lpfc_nvmet_buf_free(phba, sglq_entry->virt,
                                                    sglq_entry->phys);
                                kfree(sglq_entry);
                        }
                }
                list_splice_init(&nvmet_sgl_list,
                                 &phba->sli4_hba.lpfc_nvmet_sgl_list);
                spin_unlock(&phba->sli4_hba.sgl_list_lock);
                spin_unlock_irq(&phba->hbalock);
        } else
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "6306 NVMET xri-sgl count unchanged: %d\n",
                                nvmet_xri_cnt);
        phba->sli4_hba.nvmet_xri_cnt = nvmet_xri_cnt;

        /* update xris to nvmet sgls on the list */
        sglq_entry = NULL;
        sglq_entry_next = NULL;
        list_for_each_entry_safe(sglq_entry, sglq_entry_next,
                                 &phba->sli4_hba.lpfc_nvmet_sgl_list, list) {
                lxri = lpfc_sli4_next_xritag(phba);
                if (lxri == NO_XRI) {
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "6307 Failed to allocate xri for "
                                        "NVMET sgl\n");
                        rc = -ENOMEM;
                        goto out_free_mem;
                }
                sglq_entry->sli4_lxritag = lxri;
                sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri];
        }
        return 0;

out_free_mem:
        lpfc_free_nvmet_sgl_list(phba);
        return rc;
}

int
lpfc_io_buf_flush(struct lpfc_hba *phba, struct list_head *cbuf)
{
        LIST_HEAD(blist);
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_io_buf *lpfc_cmd;
        struct lpfc_io_buf *iobufp, *prev_iobufp;
        int idx, cnt, xri, inserted;

        cnt = 0;
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                qp = &phba->sli4_hba.hdwq[idx];
                spin_lock_irq(&qp->io_buf_list_get_lock);
                spin_lock(&qp->io_buf_list_put_lock);

                /* Take everything off the get and put lists */
                list_splice_init(&qp->lpfc_io_buf_list_get, &blist);
                list_splice(&qp->lpfc_io_buf_list_put, &blist);
                INIT_LIST_HEAD(&qp->lpfc_io_buf_list_get);
                INIT_LIST_HEAD(&qp->lpfc_io_buf_list_put);
                cnt += qp->get_io_bufs + qp->put_io_bufs;
                qp->get_io_bufs = 0;
                qp->put_io_bufs = 0;
                qp->total_io_bufs = 0;
                spin_unlock(&qp->io_buf_list_put_lock);
                spin_unlock_irq(&qp->io_buf_list_get_lock);
        }

        /*
         * Take IO buffers off blist and put on cbuf sorted by XRI.
         * This is because POST_SGL takes a sequential range of XRIs
         * to post to the firmware.
         */
        for (idx = 0; idx < cnt; idx++) {
                list_remove_head(&blist, lpfc_cmd, struct lpfc_io_buf, list);
                if (!lpfc_cmd)
                        return cnt;
                if (idx == 0) {
                        list_add_tail(&lpfc_cmd->list, cbuf);
                        continue;
                }
                xri = lpfc_cmd->cur_iocbq.sli4_xritag;
                inserted = 0;
                prev_iobufp = NULL;
                list_for_each_entry(iobufp, cbuf, list) {
                        if (xri < iobufp->cur_iocbq.sli4_xritag) {
                                if (prev_iobufp)
                                        list_add(&lpfc_cmd->list,
                                                 &prev_iobufp->list);
                                else
                                        list_add(&lpfc_cmd->list, cbuf);
                                inserted = 1;
                                break;
                        }
                        prev_iobufp = iobufp;
                }
                if (!inserted)
                        list_add_tail(&lpfc_cmd->list, cbuf);
        }
        return cnt;
}

int
lpfc_io_buf_replenish(struct lpfc_hba *phba, struct list_head *cbuf)
{
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_io_buf *lpfc_cmd;
        int idx, cnt;
        unsigned long iflags;

        qp = phba->sli4_hba.hdwq;
        cnt = 0;
        while (!list_empty(cbuf)) {
                for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                        list_remove_head(cbuf, lpfc_cmd,
                                         struct lpfc_io_buf, list);
                        if (!lpfc_cmd)
                                return cnt;
                        cnt++;
                        qp = &phba->sli4_hba.hdwq[idx];
                        lpfc_cmd->hdwq_no = idx;
                        lpfc_cmd->hdwq = qp;
                        lpfc_cmd->cur_iocbq.cmd_cmpl = NULL;
                        spin_lock_irqsave(&qp->io_buf_list_put_lock, iflags);
                        list_add_tail(&lpfc_cmd->list,
                                      &qp->lpfc_io_buf_list_put);
                        qp->put_io_bufs++;
                        qp->total_io_bufs++;
                        spin_unlock_irqrestore(&qp->io_buf_list_put_lock,
                                               iflags);
                }
        }
        return cnt;
}

/**
 * lpfc_sli4_io_sgl_update - update xri-sgl sizing and mapping
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine first calculates the sizes of the current els and allocated
 * scsi sgl lists, and then goes through all sgls to updates the physical
 * XRIs assigned due to port function reset. During port initialization, the
 * current els and allocated scsi sgl lists are 0s.
 *
 * Return codes
 *   0 - successful (for now, it always returns 0)
 **/
int
lpfc_sli4_io_sgl_update(struct lpfc_hba *phba)
{
        struct lpfc_io_buf *lpfc_ncmd = NULL, *lpfc_ncmd_next = NULL;
        uint16_t i, lxri, els_xri_cnt;
        uint16_t io_xri_cnt, io_xri_max;
        LIST_HEAD(io_sgl_list);
        int rc, cnt;

        /*
         * update on pci function's allocated nvme xri-sgl list
         */

        /* maximum number of xris available for nvme buffers */
        els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
        io_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
        phba->sli4_hba.io_xri_max = io_xri_max;

        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "6074 Current allocated XRI sgl count:%d, "
                        "maximum XRI count:%d els_xri_cnt:%d\n\n",
                        phba->sli4_hba.io_xri_cnt,
                        phba->sli4_hba.io_xri_max,
                        els_xri_cnt);

        cnt = lpfc_io_buf_flush(phba, &io_sgl_list);

        if (phba->sli4_hba.io_xri_cnt > phba->sli4_hba.io_xri_max) {
                /* max nvme xri shrunk below the allocated nvme buffers */
                io_xri_cnt = phba->sli4_hba.io_xri_cnt -
                                        phba->sli4_hba.io_xri_max;
                /* release the extra allocated nvme buffers */
                for (i = 0; i < io_xri_cnt; i++) {
                        list_remove_head(&io_sgl_list, lpfc_ncmd,
                                         struct lpfc_io_buf, list);
                        if (lpfc_ncmd) {
                                dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                              lpfc_ncmd->data,
                                              lpfc_ncmd->dma_handle);
                                kfree(lpfc_ncmd);
                        }
                }
                phba->sli4_hba.io_xri_cnt -= io_xri_cnt;
        }

        /* update xris associated to remaining allocated nvme buffers */
        lpfc_ncmd = NULL;
        lpfc_ncmd_next = NULL;
        phba->sli4_hba.io_xri_cnt = cnt;
        list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
                                 &io_sgl_list, list) {
                lxri = lpfc_sli4_next_xritag(phba);
                if (lxri == NO_XRI) {
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "6075 Failed to allocate xri for "
                                        "nvme buffer\n");
                        rc = -ENOMEM;
                        goto out_free_mem;
                }
                lpfc_ncmd->cur_iocbq.sli4_lxritag = lxri;
                lpfc_ncmd->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri];
        }
        cnt = lpfc_io_buf_replenish(phba, &io_sgl_list);
        return 0;

out_free_mem:
        lpfc_io_free(phba);
        return rc;
}

/**
 * lpfc_new_io_buf - IO buffer allocator for HBA with SLI4 IF spec
 * @phba: Pointer to lpfc hba data structure.
 * @num_to_alloc: The requested number of buffers to allocate.
 *
 * This routine allocates nvme buffers for device with SLI-4 interface spec,
 * the nvme buffer contains all the necessary information needed to initiate
 * an I/O. After allocating up to @num_to_allocate IO buffers and put
 * them on a list, it post them to the port by using SGL block post.
 *
 * Return codes:
 *   int - number of IO buffers that were allocated and posted.
 *   0 = failure, less than num_to_alloc is a partial failure.
 **/
int
lpfc_new_io_buf(struct lpfc_hba *phba, int num_to_alloc)
{
        struct lpfc_io_buf *lpfc_ncmd;
        struct lpfc_iocbq *pwqeq;
        uint16_t iotag, lxri = 0;
        int bcnt, num_posted;
        LIST_HEAD(prep_nblist);
        LIST_HEAD(post_nblist);
        LIST_HEAD(nvme_nblist);

        phba->sli4_hba.io_xri_cnt = 0;
        for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
                lpfc_ncmd = kzalloc(sizeof(*lpfc_ncmd), GFP_KERNEL);
                if (!lpfc_ncmd)
                        break;
                /*
                 * Get memory from the pci pool to map the virt space to
                 * pci bus space for an I/O. The DMA buffer includes the
                 * number of SGE's necessary to support the sg_tablesize.
                 */
                lpfc_ncmd->data = dma_pool_zalloc(phba->lpfc_sg_dma_buf_pool,
                                                  GFP_KERNEL,
                                                  &lpfc_ncmd->dma_handle);
                if (!lpfc_ncmd->data) {
                        kfree(lpfc_ncmd);
                        break;
                }

                if (phba->cfg_xpsgl && !phba->nvmet_support) {
                        INIT_LIST_HEAD(&lpfc_ncmd->dma_sgl_xtra_list);
                } else {
                        /*
                         * 4K Page alignment is CRITICAL to BlockGuard, double
                         * check to be sure.
                         */
                        if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
                            (((unsigned long)(lpfc_ncmd->data) &
                            (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) {
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "3369 Memory alignment err: "
                                                "addr=%lx\n",
                                                (unsigned long)lpfc_ncmd->data);
                                dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                              lpfc_ncmd->data,
                                              lpfc_ncmd->dma_handle);
                                kfree(lpfc_ncmd);
                                break;
                        }
                }

                INIT_LIST_HEAD(&lpfc_ncmd->dma_cmd_rsp_list);

                lxri = lpfc_sli4_next_xritag(phba);
                if (lxri == NO_XRI) {
                        dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
                        kfree(lpfc_ncmd);
                        break;
                }
                pwqeq = &lpfc_ncmd->cur_iocbq;

                /* Allocate iotag for lpfc_ncmd->cur_iocbq. */
                iotag = lpfc_sli_next_iotag(phba, pwqeq);
                if (iotag == 0) {
                        dma_pool_free(phba->lpfc_sg_dma_buf_pool,
                                      lpfc_ncmd->data, lpfc_ncmd->dma_handle);
                        kfree(lpfc_ncmd);
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6121 Failed to allocate IOTAG for"
                                        " XRI:0x%x\n", lxri);
                        lpfc_sli4_free_xri(phba, lxri);
                        break;
                }
                pwqeq->sli4_lxritag = lxri;
                pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri];

                /* Initialize local short-hand pointers. */
                lpfc_ncmd->dma_sgl = lpfc_ncmd->data;
                lpfc_ncmd->dma_phys_sgl = lpfc_ncmd->dma_handle;
                lpfc_ncmd->cur_iocbq.io_buf = lpfc_ncmd;
                spin_lock_init(&lpfc_ncmd->buf_lock);

                /* add the nvme buffer to a post list */
                list_add_tail(&lpfc_ncmd->list, &post_nblist);
                phba->sli4_hba.io_xri_cnt++;
        }
        lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
                        "6114 Allocate %d out of %d requested new NVME "
                        "buffers of size x%zu bytes\n", bcnt, num_to_alloc,
                        sizeof(*lpfc_ncmd));


        /* post the list of nvme buffer sgls to port if available */
        if (!list_empty(&post_nblist))
                num_posted = lpfc_sli4_post_io_sgl_list(
                                phba, &post_nblist, bcnt);
        else
                num_posted = 0;

        return num_posted;
}

static uint64_t
lpfc_get_wwpn(struct lpfc_hba *phba)
{
        uint64_t wwn;
        int rc;
        LPFC_MBOXQ_t *mboxq;
        MAILBOX_t *mb;

        mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
                                                GFP_KERNEL);
        if (!mboxq)
                return (uint64_t)-1;

        /* First get WWN of HBA instance */
        lpfc_read_nv(phba, mboxq);
        rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
        if (rc != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "6019 Mailbox failed , mbxCmd x%x "
                                "READ_NV, mbxStatus x%x\n",
                                bf_get(lpfc_mqe_command, &mboxq->u.mqe),
                                bf_get(lpfc_mqe_status, &mboxq->u.mqe));
                mempool_free(mboxq, phba->mbox_mem_pool);
                return (uint64_t) -1;
        }
        mb = &mboxq->u.mb;
        memcpy(&wwn, (char *)mb->un.varRDnvp.portname, sizeof(uint64_t));
        /* wwn is WWPN of HBA instance */
        mempool_free(mboxq, phba->mbox_mem_pool);
        if (phba->sli_rev == LPFC_SLI_REV4)
                return be64_to_cpu(wwn);
        else
                return rol64(wwn, 32);
}

static unsigned short lpfc_get_sg_tablesize(struct lpfc_hba *phba)
{
        if (phba->sli_rev == LPFC_SLI_REV4)
                if (phba->cfg_xpsgl && !phba->nvmet_support)
                        return LPFC_MAX_SG_TABLESIZE;
                else
                        return phba->cfg_scsi_seg_cnt;
        else
                return phba->cfg_sg_seg_cnt;
}

/**
 * lpfc_vmid_res_alloc - Allocates resources for VMID
 * @phba: pointer to lpfc hba data structure.
 * @vport: pointer to vport data structure
 *
 * This routine allocated the resources needed for the VMID.
 *
 * Return codes
 *      0 on Success
 *      Non-0 on Failure
 */
static int
lpfc_vmid_res_alloc(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
        /* VMID feature is supported only on SLI4 */
        if (phba->sli_rev == LPFC_SLI_REV3) {
                phba->cfg_vmid_app_header = 0;
                phba->cfg_vmid_priority_tagging = 0;
        }

        if (lpfc_is_vmid_enabled(phba)) {
                vport->vmid =
                    kcalloc(phba->cfg_max_vmid, sizeof(struct lpfc_vmid),
                            GFP_KERNEL);
                if (!vport->vmid)
                        return -ENOMEM;

                rwlock_init(&vport->vmid_lock);

                /* Set the VMID parameters for the vport */
                vport->vmid_priority_tagging = phba->cfg_vmid_priority_tagging;
                vport->vmid_inactivity_timeout =
                    phba->cfg_vmid_inactivity_timeout;
                vport->max_vmid = phba->cfg_max_vmid;
                vport->cur_vmid_cnt = 0;

                vport->vmid_priority_range = bitmap_zalloc
                        (LPFC_VMID_MAX_PRIORITY_RANGE, GFP_KERNEL);

                if (!vport->vmid_priority_range) {
                        kfree(vport->vmid);
                        return -ENOMEM;
                }

                hash_init(vport->hash_table);
        }
        return 0;
}

/**
 * lpfc_create_port - Create an FC port
 * @phba: pointer to lpfc hba data structure.
 * @instance: a unique integer ID to this FC port.
 * @dev: pointer to the device data structure.
 *
 * This routine creates a FC port for the upper layer protocol. The FC port
 * can be created on top of either a physical port or a virtual port provided
 * by the HBA. This routine also allocates a SCSI host data structure (shost)
 * and associates the FC port created before adding the shost into the SCSI
 * layer.
 *
 * Return codes
 *   @vport - pointer to the virtual N_Port data structure.
 *   NULL - port create failed.
 **/
struct lpfc_vport *
lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
{
        struct lpfc_vport *vport;
        struct Scsi_Host  *shost = NULL;
        struct scsi_host_template *template;
        int error = 0;
        int i;
        uint64_t wwn;
        bool use_no_reset_hba = false;
        int rc;

        if (lpfc_no_hba_reset_cnt) {
                if (phba->sli_rev < LPFC_SLI_REV4 &&
                    dev == &phba->pcidev->dev) {
                        /* Reset the port first */
                        lpfc_sli_brdrestart(phba);
                        rc = lpfc_sli_chipset_init(phba);
                        if (rc)
                                return NULL;
                }
                wwn = lpfc_get_wwpn(phba);
        }

        for (i = 0; i < lpfc_no_hba_reset_cnt; i++) {
                if (wwn == lpfc_no_hba_reset[i]) {
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "6020 Setting use_no_reset port=%llx\n",
                                        wwn);
                        use_no_reset_hba = true;
                        break;
                }
        }

        /* Seed template for SCSI host registration */
        if (dev == &phba->pcidev->dev) {
                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
                        /* Seed physical port template */
                        template = &lpfc_template;

                        if (use_no_reset_hba)
                                /* template is for a no reset SCSI Host */
                                template->eh_host_reset_handler = NULL;

                        /* Seed updated value of sg_tablesize */
                        template->sg_tablesize = lpfc_get_sg_tablesize(phba);
                } else {
                        /* NVMET is for physical port only */
                        template = &lpfc_template_nvme;
                }
        } else {
                /* Seed vport template */
                template = &lpfc_vport_template;

                /* Seed updated value of sg_tablesize */
                template->sg_tablesize = lpfc_get_sg_tablesize(phba);
        }

        shost = scsi_host_alloc(template, sizeof(struct lpfc_vport));
        if (!shost)
                goto out;

        vport = (struct lpfc_vport *) shost->hostdata;
        vport->phba = phba;
        set_bit(FC_LOADING, &vport->load_flag);
        set_bit(FC_VPORT_NEEDS_REG_VPI, &vport->fc_flag);
        vport->fc_rscn_flush = 0;
        atomic_set(&vport->fc_plogi_cnt, 0);
        atomic_set(&vport->fc_adisc_cnt, 0);
        atomic_set(&vport->fc_reglogin_cnt, 0);
        atomic_set(&vport->fc_prli_cnt, 0);
        atomic_set(&vport->fc_unmap_cnt, 0);
        atomic_set(&vport->fc_map_cnt, 0);
        atomic_set(&vport->fc_npr_cnt, 0);
        atomic_set(&vport->fc_unused_cnt, 0);
        lpfc_get_vport_cfgparam(vport);

        /* Adjust value in vport */
        vport->cfg_enable_fc4_type = phba->cfg_enable_fc4_type;

        shost->unique_id = instance;
        shost->max_id = LPFC_MAX_TARGET;
        shost->max_lun = vport->cfg_max_luns;
        shost->this_id = -1;
        shost->max_cmd_len = 16;

        if (phba->sli_rev == LPFC_SLI_REV4) {
                if (!phba->cfg_fcp_mq_threshold ||
                    phba->cfg_fcp_mq_threshold > phba->cfg_hdw_queue)
                        phba->cfg_fcp_mq_threshold = phba->cfg_hdw_queue;

                shost->nr_hw_queues = min_t(int, 2 * num_possible_nodes(),
                                            phba->cfg_fcp_mq_threshold);

                shost->dma_boundary =
                        phba->sli4_hba.pc_sli4_params.sge_supp_len-1;
        } else
                /* SLI-3 has a limited number of hardware queues (3),
                 * thus there is only one for FCP processing.
                 */
                shost->nr_hw_queues = 1;

        /*
         * Set initial can_queue value since 0 is no longer supported and
         * scsi_add_host will fail. This will be adjusted later based on the
         * max xri value determined in hba setup.
         */
        shost->can_queue = phba->cfg_hba_queue_depth - 10;
        if (dev != &phba->pcidev->dev) {
                shost->transportt = lpfc_vport_transport_template;
                vport->port_type = LPFC_NPIV_PORT;
        } else {
                shost->transportt = lpfc_transport_template;
                vport->port_type = LPFC_PHYSICAL_PORT;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
                        "9081 CreatePort TMPLATE type %x TBLsize %d "
                        "SEGcnt %d/%d\n",
                        vport->port_type, shost->sg_tablesize,
                        phba->cfg_scsi_seg_cnt, phba->cfg_sg_seg_cnt);

        /* Allocate the resources for VMID */
        rc = lpfc_vmid_res_alloc(phba, vport);

        if (rc)
                goto out_put_shost;

        /* Initialize all internally managed lists. */
        INIT_LIST_HEAD(&vport->fc_nodes);
        spin_lock_init(&vport->fc_nodes_list_lock);
        INIT_LIST_HEAD(&vport->rcv_buffer_list);
        spin_lock_init(&vport->work_port_lock);

        timer_setup(&vport->fc_disctmo, lpfc_disc_timeout, 0);

        timer_setup(&vport->els_tmofunc, lpfc_els_timeout, 0);

        timer_setup(&vport->delayed_disc_tmo, lpfc_delayed_disc_tmo, 0);

        if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
                lpfc_setup_bg(phba, shost);

        error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
        if (error)
                goto out_free_vmid;

        spin_lock_irq(&phba->port_list_lock);
        list_add_tail(&vport->listentry, &phba->port_list);
        spin_unlock_irq(&phba->port_list_lock);
        return vport;

out_free_vmid:
        kfree(vport->vmid);
        bitmap_free(vport->vmid_priority_range);
out_put_shost:
        scsi_host_put(shost);
out:
        return NULL;
}

/**
 * destroy_port -  destroy an FC port
 * @vport: pointer to an lpfc virtual N_Port data structure.
 *
 * This routine destroys a FC port from the upper layer protocol. All the
 * resources associated with the port are released.
 **/
void
destroy_port(struct lpfc_vport *vport)
{
        struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
        struct lpfc_hba  *phba = vport->phba;

        lpfc_debugfs_terminate(vport);
        fc_remove_host(shost);
        scsi_remove_host(shost);

        spin_lock_irq(&phba->port_list_lock);
        list_del_init(&vport->listentry);
        spin_unlock_irq(&phba->port_list_lock);

        lpfc_cleanup(vport);
        return;
}

/**
 * lpfc_get_instance - Get a unique integer ID
 *
 * This routine allocates a unique integer ID from lpfc_hba_index pool. It
 * uses the kernel idr facility to perform the task.
 *
 * Return codes:
 *   instance - a unique integer ID allocated as the new instance.
 *   -1 - lpfc get instance failed.
 **/
int
lpfc_get_instance(void)
{
        int ret;

        ret = idr_alloc(&lpfc_hba_index, NULL, 0, 0, GFP_KERNEL);
        return ret < 0 ? -1 : ret;
}

/**
 * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
 * @shost: pointer to SCSI host data structure.
 * @time: elapsed time of the scan in jiffies.
 *
 * This routine is called by the SCSI layer with a SCSI host to determine
 * whether the scan host is finished.
 *
 * Note: there is no scan_start function as adapter initialization will have
 * asynchronously kicked off the link initialization.
 *
 * Return codes
 *   0 - SCSI host scan is not over yet.
 *   1 - SCSI host scan is over.
 **/
int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        int stat = 0;

        spin_lock_irq(shost->host_lock);

        if (test_bit(FC_UNLOADING, &vport->load_flag)) {
                stat = 1;
                goto finished;
        }
        if (time >= msecs_to_jiffies(30 * 1000)) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0461 Scanning longer than 30 "
                                "seconds.  Continuing initialization\n");
                stat = 1;
                goto finished;
        }
        if (time >= msecs_to_jiffies(15 * 1000) &&
            phba->link_state <= LPFC_LINK_DOWN) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0465 Link down longer than 15 "
                                "seconds.  Continuing initialization\n");
                stat = 1;
                goto finished;
        }

        if (vport->port_state != LPFC_VPORT_READY)
                goto finished;
        if (vport->num_disc_nodes || vport->fc_prli_sent)
                goto finished;
        if (!atomic_read(&vport->fc_map_cnt) &&
            time < msecs_to_jiffies(2 * 1000))
                goto finished;
        if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0)
                goto finished;

        stat = 1;

finished:
        spin_unlock_irq(shost->host_lock);
        return stat;
}

static void lpfc_host_supported_speeds_set(struct Scsi_Host *shost)
{
        struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
        struct lpfc_hba   *phba = vport->phba;

        fc_host_supported_speeds(shost) = 0;
        /*
         * Avoid reporting supported link speed for FCoE as it can't be
         * controlled via FCoE.
         */
        if (phba->hba_flag & HBA_FCOE_MODE)
                return;

        if (phba->lmt & LMT_256Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_256GBIT;
        if (phba->lmt & LMT_128Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_128GBIT;
        if (phba->lmt & LMT_64Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT;
        if (phba->lmt & LMT_32Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT;
        if (phba->lmt & LMT_16Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
        if (phba->lmt & LMT_10Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
        if (phba->lmt & LMT_8Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT;
        if (phba->lmt & LMT_4Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
        if (phba->lmt & LMT_2Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
        if (phba->lmt & LMT_1Gb)
                fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
}

/**
 * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
 * @shost: pointer to SCSI host data structure.
 *
 * This routine initializes a given SCSI host attributes on a FC port. The
 * SCSI host can be either on top of a physical port or a virtual port.
 **/
void lpfc_host_attrib_init(struct Scsi_Host *shost)
{
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_hba   *phba = vport->phba;
        /*
         * Set fixed host attributes.  Must done after lpfc_sli_hba_setup().
         */

        fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
        fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
        fc_host_supported_classes(shost) = FC_COS_CLASS3;

        memset(fc_host_supported_fc4s(shost), 0,
               sizeof(fc_host_supported_fc4s(shost)));
        fc_host_supported_fc4s(shost)[2] = 1;
        fc_host_supported_fc4s(shost)[7] = 1;

        lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
                                 sizeof fc_host_symbolic_name(shost));

        lpfc_host_supported_speeds_set(shost);

        fc_host_maxframe_size(shost) =
                (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
                (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb;

        fc_host_dev_loss_tmo(shost) = vport->cfg_devloss_tmo;

        /* This value is also unchanging */
        memset(fc_host_active_fc4s(shost), 0,
               sizeof(fc_host_active_fc4s(shost)));
        fc_host_active_fc4s(shost)[2] = 1;
        fc_host_active_fc4s(shost)[7] = 1;

        fc_host_max_npiv_vports(shost) = phba->max_vpi;
        clear_bit(FC_LOADING, &vport->load_flag);
}

/**
 * lpfc_stop_port_s3 - Stop SLI3 device port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to stop an SLI3 device port, it stops the device
 * from generating interrupts and stops the device driver's timers for the
 * device.
 **/
static void
lpfc_stop_port_s3(struct lpfc_hba *phba)
{
        /* Clear all interrupt enable conditions */
        writel(0, phba->HCregaddr);
        readl(phba->HCregaddr); /* flush */
        /* Clear all pending interrupts */
        writel(0xffffffff, phba->HAregaddr);
        readl(phba->HAregaddr); /* flush */

        /* Reset some HBA SLI setup states */
        lpfc_stop_hba_timers(phba);
        phba->pport->work_port_events = 0;
}

/**
 * lpfc_stop_port_s4 - Stop SLI4 device port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to stop an SLI4 device port, it stops the device
 * from generating interrupts and stops the device driver's timers for the
 * device.
 **/
static void
lpfc_stop_port_s4(struct lpfc_hba *phba)
{
        /* Reset some HBA SLI4 setup states */
        lpfc_stop_hba_timers(phba);
        if (phba->pport)
                phba->pport->work_port_events = 0;
        phba->sli4_hba.intr_enable = 0;
}

/**
 * lpfc_stop_port - Wrapper function for stopping hba port
 * @phba: Pointer to HBA context object.
 *
 * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
 * the API jump table function pointer from the lpfc_hba struct.
 **/
void
lpfc_stop_port(struct lpfc_hba *phba)
{
        phba->lpfc_stop_port(phba);

        if (phba->wq)
                flush_workqueue(phba->wq);
}

/**
 * lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer
 * @phba: Pointer to hba for which this call is being executed.
 *
 * This routine starts the timer waiting for the FCF rediscovery to complete.
 **/
void
lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *phba)
{
        unsigned long fcf_redisc_wait_tmo =
                (jiffies + msecs_to_jiffies(LPFC_FCF_REDISCOVER_WAIT_TMO));
        /* Start fcf rediscovery wait period timer */
        mod_timer(&phba->fcf.redisc_wait, fcf_redisc_wait_tmo);
        spin_lock_irq(&phba->hbalock);
        /* Allow action to new fcf asynchronous event */
        phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
        /* Mark the FCF rediscovery pending state */
        phba->fcf.fcf_flag |= FCF_REDISC_PEND;
        spin_unlock_irq(&phba->hbalock);
}

/**
 * lpfc_sli4_fcf_redisc_wait_tmo - FCF table rediscover wait timeout
 * @t: Timer context used to obtain the pointer to lpfc hba data structure.
 *
 * This routine is invoked when waiting for FCF table rediscover has been
 * timed out. If new FCF record(s) has (have) been discovered during the
 * wait period, a new FCF event shall be added to the FCOE async event
 * list, and then worker thread shall be waked up for processing from the
 * worker thread context.
 **/
static void
lpfc_sli4_fcf_redisc_wait_tmo(struct timer_list *t)
{
        struct lpfc_hba *phba = from_timer(phba, t, fcf.redisc_wait);

        /* Don't send FCF rediscovery event if timer cancelled */
        spin_lock_irq(&phba->hbalock);
        if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) {
                spin_unlock_irq(&phba->hbalock);
                return;
        }
        /* Clear FCF rediscovery timer pending flag */
        phba->fcf.fcf_flag &= ~FCF_REDISC_PEND;
        /* FCF rediscovery event to worker thread */
        phba->fcf.fcf_flag |= FCF_REDISC_EVT;
        spin_unlock_irq(&phba->hbalock);
        lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
                        "2776 FCF rediscover quiescent timer expired\n");
        /* wake up worker thread */
        lpfc_worker_wake_up(phba);
}

/**
 * lpfc_vmid_poll - VMID timeout detection
 * @t: Timer context used to obtain the pointer to lpfc hba data structure.
 *
 * This routine is invoked when there is no I/O on by a VM for the specified
 * amount of time. When this situation is detected, the VMID has to be
 * deregistered from the switch and all the local resources freed. The VMID
 * will be reassigned to the VM once the I/O begins.
 **/
static void
lpfc_vmid_poll(struct timer_list *t)
{
        struct lpfc_hba *phba = from_timer(phba, t, inactive_vmid_poll);
        u32 wake_up = 0;

        /* check if there is a need to issue QFPA */
        if (phba->pport->vmid_priority_tagging) {
                wake_up = 1;
                phba->pport->work_port_events |= WORKER_CHECK_VMID_ISSUE_QFPA;
        }

        /* Is the vmid inactivity timer enabled */
        if (phba->pport->vmid_inactivity_timeout ||
            test_bit(FC_DEREGISTER_ALL_APP_ID, &phba->pport->load_flag)) {
                wake_up = 1;
                phba->pport->work_port_events |= WORKER_CHECK_INACTIVE_VMID;
        }

        if (wake_up)
                lpfc_worker_wake_up(phba);

        /* restart the timer for the next iteration */
        mod_timer(&phba->inactive_vmid_poll, jiffies + msecs_to_jiffies(1000 *
                                                        LPFC_VMID_TIMER));
}

/**
 * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to parse the SLI4 link-attention link fault code.
 **/
static void
lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
                           struct lpfc_acqe_link *acqe_link)
{
        switch (bf_get(lpfc_acqe_fc_la_att_type, acqe_link)) {
        case LPFC_FC_LA_TYPE_LINK_DOWN:
        case LPFC_FC_LA_TYPE_TRUNKING_EVENT:
        case LPFC_FC_LA_TYPE_ACTIVATE_FAIL:
        case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT:
                break;
        default:
                switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
                case LPFC_ASYNC_LINK_FAULT_NONE:
                case LPFC_ASYNC_LINK_FAULT_LOCAL:
                case LPFC_ASYNC_LINK_FAULT_REMOTE:
                case LPFC_ASYNC_LINK_FAULT_LR_LRR:
                        break;
                default:
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0398 Unknown link fault code: x%x\n",
                                        bf_get(lpfc_acqe_link_fault, acqe_link));
                        break;
                }
                break;
        }
}

/**
 * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to parse the SLI4 link attention type and translate it
 * into the base driver's link attention type coding.
 *
 * Return: Link attention type in terms of base driver's coding.
 **/
static uint8_t
lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
                          struct lpfc_acqe_link *acqe_link)
{
        uint8_t att_type;

        switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
        case LPFC_ASYNC_LINK_STATUS_DOWN:
        case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
                att_type = LPFC_ATT_LINK_DOWN;
                break;
        case LPFC_ASYNC_LINK_STATUS_UP:
                /* Ignore physical link up events - wait for logical link up */
                att_type = LPFC_ATT_RESERVED;
                break;
        case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
                att_type = LPFC_ATT_LINK_UP;
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0399 Invalid link attention type: x%x\n",
                                bf_get(lpfc_acqe_link_status, acqe_link));
                att_type = LPFC_ATT_RESERVED;
                break;
        }
        return att_type;
}

/**
 * lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to get an SLI3 FC port's link speed in Mbps.
 *
 * Return: link speed in terms of Mbps.
 **/
uint32_t
lpfc_sli_port_speed_get(struct lpfc_hba *phba)
{
        uint32_t link_speed;

        if (!lpfc_is_link_up(phba))
                return 0;

        if (phba->sli_rev <= LPFC_SLI_REV3) {
                switch (phba->fc_linkspeed) {
                case LPFC_LINK_SPEED_1GHZ:
                        link_speed = 1000;
                        break;
                case LPFC_LINK_SPEED_2GHZ:
                        link_speed = 2000;
                        break;
                case LPFC_LINK_SPEED_4GHZ:
                        link_speed = 4000;
                        break;
                case LPFC_LINK_SPEED_8GHZ:
                        link_speed = 8000;
                        break;
                case LPFC_LINK_SPEED_10GHZ:
                        link_speed = 10000;
                        break;
                case LPFC_LINK_SPEED_16GHZ:
                        link_speed = 16000;
                        break;
                default:
                        link_speed = 0;
                }
        } else {
                if (phba->sli4_hba.link_state.logical_speed)
                        link_speed =
                              phba->sli4_hba.link_state.logical_speed;
                else
                        link_speed = phba->sli4_hba.link_state.speed;
        }
        return link_speed;
}

/**
 * lpfc_sli4_port_speed_parse - Parse async evt link speed code to link speed
 * @phba: pointer to lpfc hba data structure.
 * @evt_code: asynchronous event code.
 * @speed_code: asynchronous event link speed code.
 *
 * This routine is to parse the giving SLI4 async event link speed code into
 * value of Mbps for the link speed.
 *
 * Return: link speed in terms of Mbps.
 **/
static uint32_t
lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
                           uint8_t speed_code)
{
        uint32_t port_speed;

        switch (evt_code) {
        case LPFC_TRAILER_CODE_LINK:
                switch (speed_code) {
                case LPFC_ASYNC_LINK_SPEED_ZERO:
                        port_speed = 0;
                        break;
                case LPFC_ASYNC_LINK_SPEED_10MBPS:
                        port_speed = 10;
                        break;
                case LPFC_ASYNC_LINK_SPEED_100MBPS:
                        port_speed = 100;
                        break;
                case LPFC_ASYNC_LINK_SPEED_1GBPS:
                        port_speed = 1000;
                        break;
                case LPFC_ASYNC_LINK_SPEED_10GBPS:
                        port_speed = 10000;
                        break;
                case LPFC_ASYNC_LINK_SPEED_20GBPS:
                        port_speed = 20000;
                        break;
                case LPFC_ASYNC_LINK_SPEED_25GBPS:
                        port_speed = 25000;
                        break;
                case LPFC_ASYNC_LINK_SPEED_40GBPS:
                        port_speed = 40000;
                        break;
                case LPFC_ASYNC_LINK_SPEED_100GBPS:
                        port_speed = 100000;
                        break;
                default:
                        port_speed = 0;
                }
                break;
        case LPFC_TRAILER_CODE_FC:
                switch (speed_code) {
                case LPFC_FC_LA_SPEED_UNKNOWN:
                        port_speed = 0;
                        break;
                case LPFC_FC_LA_SPEED_1G:
                        port_speed = 1000;
                        break;
                case LPFC_FC_LA_SPEED_2G:
                        port_speed = 2000;
                        break;
                case LPFC_FC_LA_SPEED_4G:
                        port_speed = 4000;
                        break;
                case LPFC_FC_LA_SPEED_8G:
                        port_speed = 8000;
                        break;
                case LPFC_FC_LA_SPEED_10G:
                        port_speed = 10000;
                        break;
                case LPFC_FC_LA_SPEED_16G:
                        port_speed = 16000;
                        break;
                case LPFC_FC_LA_SPEED_32G:
                        port_speed = 32000;
                        break;
                case LPFC_FC_LA_SPEED_64G:
                        port_speed = 64000;
                        break;
                case LPFC_FC_LA_SPEED_128G:
                        port_speed = 128000;
                        break;
                case LPFC_FC_LA_SPEED_256G:
                        port_speed = 256000;
                        break;
                default:
                        port_speed = 0;
                }
                break;
        default:
                port_speed = 0;
        }
        return port_speed;
}

/**
 * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_link: pointer to the async link completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous FCoE link event.
 **/
static void
lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
                         struct lpfc_acqe_link *acqe_link)
{
        LPFC_MBOXQ_t *pmb;
        MAILBOX_t *mb;
        struct lpfc_mbx_read_top *la;
        uint8_t att_type;
        int rc;

        att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
        if (att_type != LPFC_ATT_LINK_DOWN && att_type != LPFC_ATT_LINK_UP)
                return;
        phba->fcoe_eventtag = acqe_link->event_tag;
        pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0395 The mboxq allocation failed\n");
                return;
        }

        rc = lpfc_mbox_rsrc_prep(phba, pmb);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0396 mailbox allocation failed\n");
                goto out_free_pmb;
        }

        /* Cleanup any outstanding ELS commands */
        lpfc_els_flush_all_cmd(phba);

        /* Block ELS IOCBs until we have done process link event */
        phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT;

        /* Update link event statistics */
        phba->sli.slistat.link_event++;

        /* Create lpfc_handle_latt mailbox command from link ACQE */
        lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf);
        pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
        pmb->vport = phba->pport;

        /* Keep the link status for extra SLI4 state machine reference */
        phba->sli4_hba.link_state.speed =
                        lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_LINK,
                                bf_get(lpfc_acqe_link_speed, acqe_link));
        phba->sli4_hba.link_state.duplex =
                                bf_get(lpfc_acqe_link_duplex, acqe_link);
        phba->sli4_hba.link_state.status =
                                bf_get(lpfc_acqe_link_status, acqe_link);
        phba->sli4_hba.link_state.type =
                                bf_get(lpfc_acqe_link_type, acqe_link);
        phba->sli4_hba.link_state.number =
                                bf_get(lpfc_acqe_link_number, acqe_link);
        phba->sli4_hba.link_state.fault =
                                bf_get(lpfc_acqe_link_fault, acqe_link);
        phba->sli4_hba.link_state.logical_speed =
                        bf_get(lpfc_acqe_logical_link_speed, acqe_link) * 10;

        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "2900 Async FC/FCoE Link event - Speed:%dGBit "
                        "duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
                        "Logical speed:%dMbps Fault:%d\n",
                        phba->sli4_hba.link_state.speed,
                        phba->sli4_hba.link_state.topology,
                        phba->sli4_hba.link_state.status,
                        phba->sli4_hba.link_state.type,
                        phba->sli4_hba.link_state.number,
                        phba->sli4_hba.link_state.logical_speed,
                        phba->sli4_hba.link_state.fault);
        /*
         * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
         * topology info. Note: Optional for non FC-AL ports.
         */
        if (!(phba->hba_flag & HBA_FCOE_MODE)) {
                rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
                if (rc == MBX_NOT_FINISHED)
                        goto out_free_pmb;
                return;
        }
        /*
         * For FCoE Mode: fill in all the topology information we need and call
         * the READ_TOPOLOGY completion routine to continue without actually
         * sending the READ_TOPOLOGY mailbox command to the port.
         */
        /* Initialize completion status */
        mb = &pmb->u.mb;
        mb->mbxStatus = MBX_SUCCESS;

        /* Parse port fault information field */
        lpfc_sli4_parse_latt_fault(phba, acqe_link);

        /* Parse and translate link attention fields */
        la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
        la->eventTag = acqe_link->event_tag;
        bf_set(lpfc_mbx_read_top_att_type, la, att_type);
        bf_set(lpfc_mbx_read_top_link_spd, la,
               (bf_get(lpfc_acqe_link_speed, acqe_link)));

        /* Fake the following irrelevant fields */
        bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
        bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
        bf_set(lpfc_mbx_read_top_il, la, 0);
        bf_set(lpfc_mbx_read_top_pb, la, 0);
        bf_set(lpfc_mbx_read_top_fa, la, 0);
        bf_set(lpfc_mbx_read_top_mm, la, 0);

        /* Invoke the lpfc_handle_latt mailbox command callback function */
        lpfc_mbx_cmpl_read_topology(phba, pmb);

        return;

out_free_pmb:
        lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
}

/**
 * lpfc_async_link_speed_to_read_top - Parse async evt link speed code to read
 * topology.
 * @phba: pointer to lpfc hba data structure.
 * @speed_code: asynchronous event link speed code.
 *
 * This routine is to parse the giving SLI4 async event link speed code into
 * value of Read topology link speed.
 *
 * Return: link speed in terms of Read topology.
 **/
static uint8_t
lpfc_async_link_speed_to_read_top(struct lpfc_hba *phba, uint8_t speed_code)
{
        uint8_t port_speed;

        switch (speed_code) {
        case LPFC_FC_LA_SPEED_1G:
                port_speed = LPFC_LINK_SPEED_1GHZ;
                break;
        case LPFC_FC_LA_SPEED_2G:
                port_speed = LPFC_LINK_SPEED_2GHZ;
                break;
        case LPFC_FC_LA_SPEED_4G:
                port_speed = LPFC_LINK_SPEED_4GHZ;
                break;
        case LPFC_FC_LA_SPEED_8G:
                port_speed = LPFC_LINK_SPEED_8GHZ;
                break;
        case LPFC_FC_LA_SPEED_16G:
                port_speed = LPFC_LINK_SPEED_16GHZ;
                break;
        case LPFC_FC_LA_SPEED_32G:
                port_speed = LPFC_LINK_SPEED_32GHZ;
                break;
        case LPFC_FC_LA_SPEED_64G:
                port_speed = LPFC_LINK_SPEED_64GHZ;
                break;
        case LPFC_FC_LA_SPEED_128G:
                port_speed = LPFC_LINK_SPEED_128GHZ;
                break;
        case LPFC_FC_LA_SPEED_256G:
                port_speed = LPFC_LINK_SPEED_256GHZ;
                break;
        default:
                port_speed = 0;
                break;
        }

        return port_speed;
}

void
lpfc_cgn_dump_rxmonitor(struct lpfc_hba *phba)
{
        if (!phba->rx_monitor) {
                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "4411 Rx Monitor Info is empty.\n");
        } else {
                lpfc_rx_monitor_report(phba, phba->rx_monitor, NULL, 0,
                                       LPFC_MAX_RXMONITOR_DUMP);
        }
}

/**
 * lpfc_cgn_update_stat - Save data into congestion stats buffer
 * @phba: pointer to lpfc hba data structure.
 * @dtag: FPIN descriptor received
 *
 * Increment the FPIN received counter/time when it happens.
 */
void
lpfc_cgn_update_stat(struct lpfc_hba *phba, uint32_t dtag)
{
        struct lpfc_cgn_info *cp;
        u32 value;

        /* Make sure we have a congestion info buffer */
        if (!phba->cgn_i)
                return;
        cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;

        /* Update congestion statistics */
        switch (dtag) {
        case ELS_DTAG_LNK_INTEGRITY:
                le32_add_cpu(&cp->link_integ_notification, 1);
                lpfc_cgn_update_tstamp(phba, &cp->stat_lnk);
                break;
        case ELS_DTAG_DELIVERY:
                le32_add_cpu(&cp->delivery_notification, 1);
                lpfc_cgn_update_tstamp(phba, &cp->stat_delivery);
                break;
        case ELS_DTAG_PEER_CONGEST:
                le32_add_cpu(&cp->cgn_peer_notification, 1);
                lpfc_cgn_update_tstamp(phba, &cp->stat_peer);
                break;
        case ELS_DTAG_CONGESTION:
                le32_add_cpu(&cp->cgn_notification, 1);
                lpfc_cgn_update_tstamp(phba, &cp->stat_fpin);
        }
        if (phba->cgn_fpin_frequency &&
            phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) {
                value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency;
                cp->cgn_stat_npm = value;
        }

        value = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ,
                                    LPFC_CGN_CRC32_SEED);
        cp->cgn_info_crc = cpu_to_le32(value);
}

/**
 * lpfc_cgn_update_tstamp - Update cmf timestamp
 * @phba: pointer to lpfc hba data structure.
 * @ts: structure to write the timestamp to.
 */
void
lpfc_cgn_update_tstamp(struct lpfc_hba *phba, struct lpfc_cgn_ts *ts)
{
        struct timespec64 cur_time;
        struct tm tm_val;

        ktime_get_real_ts64(&cur_time);
        time64_to_tm(cur_time.tv_sec, 0, &tm_val);

        ts->month = tm_val.tm_mon + 1;
        ts->day = tm_val.tm_mday;
        ts->year = tm_val.tm_year - 100;
        ts->hour = tm_val.tm_hour;
        ts->minute = tm_val.tm_min;
        ts->second = tm_val.tm_sec;

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "2646 Updated CMF timestamp : "
                        "%u/%u/%u %u:%u:%u\n",
                        ts->day, ts->month,
                        ts->year, ts->hour,
                        ts->minute, ts->second);
}

/**
 * lpfc_cmf_stats_timer - Save data into registered congestion buffer
 * @timer: Timer cookie to access lpfc private data
 *
 * Save the congestion event data every minute.
 * On the hour collapse all the minute data into hour data. Every day
 * collapse all the hour data into daily data. Separate driver
 * and fabrc congestion event counters that will be saved out
 * to the registered congestion buffer every minute.
 */
static enum hrtimer_restart
lpfc_cmf_stats_timer(struct hrtimer *timer)
{
        struct lpfc_hba *phba;
        struct lpfc_cgn_info *cp;
        uint32_t i, index;
        uint16_t value, mvalue;
        uint64_t bps;
        uint32_t mbps;
        uint32_t dvalue, wvalue, lvalue, avalue;
        uint64_t latsum;
        __le16 *ptr;
        __le32 *lptr;
        __le16 *mptr;

        phba = container_of(timer, struct lpfc_hba, cmf_stats_timer);
        /* Make sure we have a congestion info buffer */
        if (!phba->cgn_i)
                return HRTIMER_NORESTART;
        cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;

        phba->cgn_evt_timestamp = jiffies +
                        msecs_to_jiffies(LPFC_CGN_TIMER_TO_MIN);
        phba->cgn_evt_minute++;

        /* We should get to this point in the routine on 1 minute intervals */
        lpfc_cgn_update_tstamp(phba, &cp->base_time);

        if (phba->cgn_fpin_frequency &&
            phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) {
                value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency;
                cp->cgn_stat_npm = value;
        }

        /* Read and clear the latency counters for this minute */
        lvalue = atomic_read(&phba->cgn_latency_evt_cnt);
        latsum = atomic64_read(&phba->cgn_latency_evt);
        atomic_set(&phba->cgn_latency_evt_cnt, 0);
        atomic64_set(&phba->cgn_latency_evt, 0);

        /* We need to store MB/sec bandwidth in the congestion information.
         * block_cnt is count of 512 byte blocks for the entire minute,
         * bps will get bytes per sec before finally converting to MB/sec.
         */
        bps = div_u64(phba->rx_block_cnt, LPFC_SEC_MIN) * 512;
        phba->rx_block_cnt = 0;
        mvalue = bps / (1024 * 1024); /* convert to MB/sec */

        /* Every minute */
        /* cgn parameters */
        cp->cgn_info_mode = phba->cgn_p.cgn_param_mode;
        cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0;
        cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1;
        cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2;

        /* Fill in default LUN qdepth */
        value = (uint16_t)(phba->pport->cfg_lun_queue_depth);
        cp->cgn_lunq = cpu_to_le16(value);

        /* Record congestion buffer info - every minute
         * cgn_driver_evt_cnt (Driver events)
         * cgn_fabric_warn_cnt (Congestion Warnings)
         * cgn_latency_evt_cnt / cgn_latency_evt (IO Latency)
         * cgn_fabric_alarm_cnt (Congestion Alarms)
         */
        index = ++cp->cgn_index_minute;
        if (cp->cgn_index_minute == LPFC_MIN_HOUR) {
                cp->cgn_index_minute = 0;
                index = 0;
        }

        /* Get the number of driver events in this sample and reset counter */
        dvalue = atomic_read(&phba->cgn_driver_evt_cnt);
        atomic_set(&phba->cgn_driver_evt_cnt, 0);

        /* Get the number of warning events - FPIN and Signal for this minute */
        wvalue = 0;
        if ((phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN) ||
            phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
            phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM)
                wvalue = atomic_read(&phba->cgn_fabric_warn_cnt);
        atomic_set(&phba->cgn_fabric_warn_cnt, 0);

        /* Get the number of alarm events - FPIN and Signal for this minute */
        avalue = 0;
        if ((phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM) ||
            phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM)
                avalue = atomic_read(&phba->cgn_fabric_alarm_cnt);
        atomic_set(&phba->cgn_fabric_alarm_cnt, 0);

        /* Collect the driver, warning, alarm and latency counts for this
         * minute into the driver congestion buffer.
         */
        ptr = &cp->cgn_drvr_min[index];
        value = (uint16_t)dvalue;
        *ptr = cpu_to_le16(value);

        ptr = &cp->cgn_warn_min[index];
        value = (uint16_t)wvalue;
        *ptr = cpu_to_le16(value);

        ptr = &cp->cgn_alarm_min[index];
        value = (uint16_t)avalue;
        *ptr = cpu_to_le16(value);

        lptr = &cp->cgn_latency_min[index];
        if (lvalue) {
                lvalue = (uint32_t)div_u64(latsum, lvalue);
                *lptr = cpu_to_le32(lvalue);
        } else {
                *lptr = 0;
        }

        /* Collect the bandwidth value into the driver's congesion buffer. */
        mptr = &cp->cgn_bw_min[index];
        *mptr = cpu_to_le16(mvalue);

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "2418 Congestion Info - minute (%d): %d %d %d %d %d\n",
                        index, dvalue, wvalue, *lptr, mvalue, avalue);

        /* Every hour */
        if ((phba->cgn_evt_minute % LPFC_MIN_HOUR) == 0) {
                /* Record congestion buffer info - every hour
                 * Collapse all minutes into an hour
                 */
                index = ++cp->cgn_index_hour;
                if (cp->cgn_index_hour == LPFC_HOUR_DAY) {
                        cp->cgn_index_hour = 0;
                        index = 0;
                }

                dvalue = 0;
                wvalue = 0;
                lvalue = 0;
                avalue = 0;
                mvalue = 0;
                mbps = 0;
                for (i = 0; i < LPFC_MIN_HOUR; i++) {
                        dvalue += le16_to_cpu(cp->cgn_drvr_min[i]);
                        wvalue += le16_to_cpu(cp->cgn_warn_min[i]);
                        lvalue += le32_to_cpu(cp->cgn_latency_min[i]);
                        mbps += le16_to_cpu(cp->cgn_bw_min[i]);
                        avalue += le16_to_cpu(cp->cgn_alarm_min[i]);
                }
                if (lvalue)             /* Avg of latency averages */
                        lvalue /= LPFC_MIN_HOUR;
                if (mbps)               /* Avg of Bandwidth averages */
                        mvalue = mbps / LPFC_MIN_HOUR;

                lptr = &cp->cgn_drvr_hr[index];
                *lptr = cpu_to_le32(dvalue);
                lptr = &cp->cgn_warn_hr[index];
                *lptr = cpu_to_le32(wvalue);
                lptr = &cp->cgn_latency_hr[index];
                *lptr = cpu_to_le32(lvalue);
                mptr = &cp->cgn_bw_hr[index];
                *mptr = cpu_to_le16(mvalue);
                lptr = &cp->cgn_alarm_hr[index];
                *lptr = cpu_to_le32(avalue);

                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "2419 Congestion Info - hour "
                                "(%d): %d %d %d %d %d\n",
                                index, dvalue, wvalue, lvalue, mvalue, avalue);
        }

        /* Every day */
        if ((phba->cgn_evt_minute % LPFC_MIN_DAY) == 0) {
                /* Record congestion buffer info - every hour
                 * Collapse all hours into a day. Rotate days
                 * after LPFC_MAX_CGN_DAYS.
                 */
                index = ++cp->cgn_index_day;
                if (cp->cgn_index_day == LPFC_MAX_CGN_DAYS) {
                        cp->cgn_index_day = 0;
                        index = 0;
                }

                dvalue = 0;
                wvalue = 0;
                lvalue = 0;
                mvalue = 0;
                mbps = 0;
                avalue = 0;
                for (i = 0; i < LPFC_HOUR_DAY; i++) {
                        dvalue += le32_to_cpu(cp->cgn_drvr_hr[i]);
                        wvalue += le32_to_cpu(cp->cgn_warn_hr[i]);
                        lvalue += le32_to_cpu(cp->cgn_latency_hr[i]);
                        mbps += le16_to_cpu(cp->cgn_bw_hr[i]);
                        avalue += le32_to_cpu(cp->cgn_alarm_hr[i]);
                }
                if (lvalue)             /* Avg of latency averages */
                        lvalue /= LPFC_HOUR_DAY;
                if (mbps)               /* Avg of Bandwidth averages */
                        mvalue = mbps / LPFC_HOUR_DAY;

                lptr = &cp->cgn_drvr_day[index];
                *lptr = cpu_to_le32(dvalue);
                lptr = &cp->cgn_warn_day[index];
                *lptr = cpu_to_le32(wvalue);
                lptr = &cp->cgn_latency_day[index];
                *lptr = cpu_to_le32(lvalue);
                mptr = &cp->cgn_bw_day[index];
                *mptr = cpu_to_le16(mvalue);
                lptr = &cp->cgn_alarm_day[index];
                *lptr = cpu_to_le32(avalue);

                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "2420 Congestion Info - daily (%d): "
                                "%d %d %d %d %d\n",
                                index, dvalue, wvalue, lvalue, mvalue, avalue);
        }

        /* Use the frequency found in the last rcv'ed FPIN */
        value = phba->cgn_fpin_frequency;
        cp->cgn_warn_freq = cpu_to_le16(value);
        cp->cgn_alarm_freq = cpu_to_le16(value);

        lvalue = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ,
                                     LPFC_CGN_CRC32_SEED);
        cp->cgn_info_crc = cpu_to_le32(lvalue);

        hrtimer_forward_now(timer, ktime_set(0, LPFC_SEC_MIN * NSEC_PER_SEC));

        return HRTIMER_RESTART;
}

/**
 * lpfc_calc_cmf_latency - latency from start of rxate timer interval
 * @phba: The Hba for which this call is being executed.
 *
 * The routine calculates the latency from the beginning of the CMF timer
 * interval to the current point in time. It is called from IO completion
 * when we exceed our Bandwidth limitation for the time interval.
 */
uint32_t
lpfc_calc_cmf_latency(struct lpfc_hba *phba)
{
        struct timespec64 cmpl_time;
        uint32_t msec = 0;

        ktime_get_real_ts64(&cmpl_time);

        /* This routine works on a ms granularity so sec and usec are
         * converted accordingly.
         */
        if (cmpl_time.tv_sec == phba->cmf_latency.tv_sec) {
                msec = (cmpl_time.tv_nsec - phba->cmf_latency.tv_nsec) /
                        NSEC_PER_MSEC;
        } else {
                if (cmpl_time.tv_nsec >= phba->cmf_latency.tv_nsec) {
                        msec = (cmpl_time.tv_sec -
                                phba->cmf_latency.tv_sec) * MSEC_PER_SEC;
                        msec += ((cmpl_time.tv_nsec -
                                  phba->cmf_latency.tv_nsec) / NSEC_PER_MSEC);
                } else {
                        msec = (cmpl_time.tv_sec - phba->cmf_latency.tv_sec -
                                1) * MSEC_PER_SEC;
                        msec += (((NSEC_PER_SEC - phba->cmf_latency.tv_nsec) +
                                 cmpl_time.tv_nsec) / NSEC_PER_MSEC);
                }
        }
        return msec;
}

/**
 * lpfc_cmf_timer -  This is the timer function for one congestion
 * rate interval.
 * @timer: Pointer to the high resolution timer that expired
 */
static enum hrtimer_restart
lpfc_cmf_timer(struct hrtimer *timer)
{
        struct lpfc_hba *phba = container_of(timer, struct lpfc_hba,
                                             cmf_timer);
        struct rx_info_entry entry;
        uint32_t io_cnt;
        uint32_t busy, max_read;
        uint64_t total, rcv, lat, mbpi, extra, cnt;
        int timer_interval = LPFC_CMF_INTERVAL;
        uint32_t ms;
        struct lpfc_cgn_stat *cgs;
        int cpu;

        /* Only restart the timer if congestion mgmt is on */
        if (phba->cmf_active_mode == LPFC_CFG_OFF ||
            !phba->cmf_latency.tv_sec) {
                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "6224 CMF timer exit: %d %lld\n",
                                phba->cmf_active_mode,
                                (uint64_t)phba->cmf_latency.tv_sec);
                return HRTIMER_NORESTART;
        }

        /* If pport is not ready yet, just exit and wait for
         * the next timer cycle to hit.
         */
        if (!phba->pport)
                goto skip;

        /* Do not block SCSI IO while in the timer routine since
         * total_bytes will be cleared
         */
        atomic_set(&phba->cmf_stop_io, 1);

        /* First we need to calculate the actual ms between
         * the last timer interrupt and this one. We ask for
         * LPFC_CMF_INTERVAL, however the actual time may
         * vary depending on system overhead.
         */
        ms = lpfc_calc_cmf_latency(phba);


        /* Immediately after we calculate the time since the last
         * timer interrupt, set the start time for the next
         * interrupt
         */
        ktime_get_real_ts64(&phba->cmf_latency);

        phba->cmf_link_byte_count =
                div_u64(phba->cmf_max_line_rate * LPFC_CMF_INTERVAL, 1000);

        /* Collect all the stats from the prior timer interval */
        total = 0;
        io_cnt = 0;
        lat = 0;
        rcv = 0;
        for_each_present_cpu(cpu) {
                cgs = per_cpu_ptr(phba->cmf_stat, cpu);
                total += atomic64_xchg(&cgs->total_bytes, 0);
                io_cnt += atomic_xchg(&cgs->rx_io_cnt, 0);
                lat += atomic64_xchg(&cgs->rx_latency, 0);
                rcv += atomic64_xchg(&cgs->rcv_bytes, 0);
        }

        /* Before we issue another CMF_SYNC_WQE, retrieve the BW
         * returned from the last CMF_SYNC_WQE issued, from
         * cmf_last_sync_bw. This will be the target BW for
         * this next timer interval.
         */
        if (phba->cmf_active_mode == LPFC_CFG_MANAGED &&
            phba->link_state != LPFC_LINK_DOWN &&
            phba->hba_flag & HBA_SETUP) {
                mbpi = phba->cmf_last_sync_bw;
                phba->cmf_last_sync_bw = 0;
                extra = 0;

                /* Calculate any extra bytes needed to account for the
                 * timer accuracy. If we are less than LPFC_CMF_INTERVAL
                 * calculate the adjustment needed for total to reflect
                 * a full LPFC_CMF_INTERVAL.
                 */
                if (ms && ms < LPFC_CMF_INTERVAL) {
                        cnt = div_u64(total, ms); /* bytes per ms */
                        cnt *= LPFC_CMF_INTERVAL; /* what total should be */
                        extra = cnt - total;
                }
                lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total + extra);
        } else {
                /* For Monitor mode or link down we want mbpi
                 * to be the full link speed
                 */
                mbpi = phba->cmf_link_byte_count;
                extra = 0;
        }
        phba->cmf_timer_cnt++;

        if (io_cnt) {
                /* Update congestion info buffer latency in us */
                atomic_add(io_cnt, &phba->cgn_latency_evt_cnt);
                atomic64_add(lat, &phba->cgn_latency_evt);
        }
        busy = atomic_xchg(&phba->cmf_busy, 0);
        max_read = atomic_xchg(&phba->rx_max_read_cnt, 0);

        /* Calculate MBPI for the next timer interval */
        if (mbpi) {
                if (mbpi > phba->cmf_link_byte_count ||
                    phba->cmf_active_mode == LPFC_CFG_MONITOR)
                        mbpi = phba->cmf_link_byte_count;

                /* Change max_bytes_per_interval to what the prior
                 * CMF_SYNC_WQE cmpl indicated.
                 */
                if (mbpi != phba->cmf_max_bytes_per_interval)
                        phba->cmf_max_bytes_per_interval = mbpi;
        }

        /* Save rxmonitor information for debug */
        if (phba->rx_monitor) {
                entry.total_bytes = total;
                entry.cmf_bytes = total + extra;
                entry.rcv_bytes = rcv;
                entry.cmf_busy = busy;
                entry.cmf_info = phba->cmf_active_info;
                if (io_cnt) {
                        entry.avg_io_latency = div_u64(lat, io_cnt);
                        entry.avg_io_size = div_u64(rcv, io_cnt);
                } else {
                        entry.avg_io_latency = 0;
                        entry.avg_io_size = 0;
                }
                entry.max_read_cnt = max_read;
                entry.io_cnt = io_cnt;
                entry.max_bytes_per_interval = mbpi;
                if (phba->cmf_active_mode == LPFC_CFG_MANAGED)
                        entry.timer_utilization = phba->cmf_last_ts;
                else
                        entry.timer_utilization = ms;
                entry.timer_interval = ms;
                phba->cmf_last_ts = 0;

                lpfc_rx_monitor_record(phba->rx_monitor, &entry);
        }

        if (phba->cmf_active_mode == LPFC_CFG_MONITOR) {
                /* If Monitor mode, check if we are oversubscribed
                 * against the full line rate.
                 */
                if (mbpi && total > mbpi)
                        atomic_inc(&phba->cgn_driver_evt_cnt);
        }
        phba->rx_block_cnt += div_u64(rcv, 512);  /* save 512 byte block cnt */

        /* Since total_bytes has already been zero'ed, its okay to unblock
         * after max_bytes_per_interval is setup.
         */
        if (atomic_xchg(&phba->cmf_bw_wait, 0))
                queue_work(phba->wq, &phba->unblock_request_work);

        /* SCSI IO is now unblocked */
        atomic_set(&phba->cmf_stop_io, 0);

skip:
        hrtimer_forward_now(timer,
                            ktime_set(0, timer_interval * NSEC_PER_MSEC));
        return HRTIMER_RESTART;
}

#define trunk_link_status(__idx)\
        bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
               ((phba->trunk_link.link##__idx.state == LPFC_LINK_UP) ?\
                "Link up" : "Link down") : "NA"
/* Did port __idx reported an error */
#define trunk_port_fault(__idx)\
        bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
               (port_fault & (1 << __idx) ? "YES" : "NO") : "NA"

static void
lpfc_update_trunk_link_status(struct lpfc_hba *phba,
                              struct lpfc_acqe_fc_la *acqe_fc)
{
        uint8_t port_fault = bf_get(lpfc_acqe_fc_la_trunk_linkmask, acqe_fc);
        uint8_t err = bf_get(lpfc_acqe_fc_la_trunk_fault, acqe_fc);
        u8 cnt = 0;

        phba->sli4_hba.link_state.speed =
                lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
                                bf_get(lpfc_acqe_fc_la_speed, acqe_fc));

        phba->sli4_hba.link_state.logical_speed =
                                bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
        /* We got FC link speed, convert to fc_linkspeed (READ_TOPOLOGY) */
        phba->fc_linkspeed =
                 lpfc_async_link_speed_to_read_top(
                                phba,
                                bf_get(lpfc_acqe_fc_la_speed, acqe_fc));

        if (bf_get(lpfc_acqe_fc_la_trunk_config_port0, acqe_fc)) {
                phba->trunk_link.link0.state =
                        bf_get(lpfc_acqe_fc_la_trunk_link_status_port0, acqe_fc)
                        ? LPFC_LINK_UP : LPFC_LINK_DOWN;
                phba->trunk_link.link0.fault = port_fault & 0x1 ? err : 0;
                cnt++;
        }
        if (bf_get(lpfc_acqe_fc_la_trunk_config_port1, acqe_fc)) {
                phba->trunk_link.link1.state =
                        bf_get(lpfc_acqe_fc_la_trunk_link_status_port1, acqe_fc)
                        ? LPFC_LINK_UP : LPFC_LINK_DOWN;
                phba->trunk_link.link1.fault = port_fault & 0x2 ? err : 0;
                cnt++;
        }
        if (bf_get(lpfc_acqe_fc_la_trunk_config_port2, acqe_fc)) {
                phba->trunk_link.link2.state =
                        bf_get(lpfc_acqe_fc_la_trunk_link_status_port2, acqe_fc)
                        ? LPFC_LINK_UP : LPFC_LINK_DOWN;
                phba->trunk_link.link2.fault = port_fault & 0x4 ? err : 0;
                cnt++;
        }
        if (bf_get(lpfc_acqe_fc_la_trunk_config_port3, acqe_fc)) {
                phba->trunk_link.link3.state =
                        bf_get(lpfc_acqe_fc_la_trunk_link_status_port3, acqe_fc)
                        ? LPFC_LINK_UP : LPFC_LINK_DOWN;
                phba->trunk_link.link3.fault = port_fault & 0x8 ? err : 0;
                cnt++;
        }

        if (cnt)
                phba->trunk_link.phy_lnk_speed =
                        phba->sli4_hba.link_state.logical_speed / (cnt * 1000);
        else
                phba->trunk_link.phy_lnk_speed = LPFC_LINK_SPEED_UNKNOWN;

        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2910 Async FC Trunking Event - Speed:%d\n"
                        "\tLogical speed:%d "
                        "port0: %s port1: %s port2: %s port3: %s\n",
                        phba->sli4_hba.link_state.speed,
                        phba->sli4_hba.link_state.logical_speed,
                        trunk_link_status(0), trunk_link_status(1),
                        trunk_link_status(2), trunk_link_status(3));

        if (phba->cmf_active_mode != LPFC_CFG_OFF)
                lpfc_cmf_signal_init(phba);

        if (port_fault)
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3202 trunk error:0x%x (%s) seen on port0:%s "
                                /*
                                 * SLI-4: We have only 0xA error codes
                                 * defined as of now. print an appropriate
                                 * message in case driver needs to be updated.
                                 */
                                "port1:%s port2:%s port3:%s\n", err, err > 0xA ?
                                "UNDEFINED. update driver." : trunk_errmsg[err],
                                trunk_port_fault(0), trunk_port_fault(1),
                                trunk_port_fault(2), trunk_port_fault(3));
}


/**
 * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_fc: pointer to the async fc completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous FC event. It will simply log
 * that the event was received and then issue a read_topology mailbox command so
 * that the rest of the driver will treat it the same as SLI3.
 **/
static void
lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
{
        LPFC_MBOXQ_t *pmb;
        MAILBOX_t *mb;
        struct lpfc_mbx_read_top *la;
        char *log_level;
        int rc;

        if (bf_get(lpfc_trailer_type, acqe_fc) !=
            LPFC_FC_LA_EVENT_TYPE_FC_LINK) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2895 Non FC link Event detected.(%d)\n",
                                bf_get(lpfc_trailer_type, acqe_fc));
                return;
        }

        if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
            LPFC_FC_LA_TYPE_TRUNKING_EVENT) {
                lpfc_update_trunk_link_status(phba, acqe_fc);
                return;
        }

        /* Keep the link status for extra SLI4 state machine reference */
        phba->sli4_hba.link_state.speed =
                        lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
                                bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
        phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL;
        phba->sli4_hba.link_state.topology =
                                bf_get(lpfc_acqe_fc_la_topology, acqe_fc);
        phba->sli4_hba.link_state.status =
                                bf_get(lpfc_acqe_fc_la_att_type, acqe_fc);
        phba->sli4_hba.link_state.type =
                                bf_get(lpfc_acqe_fc_la_port_type, acqe_fc);
        phba->sli4_hba.link_state.number =
                                bf_get(lpfc_acqe_fc_la_port_number, acqe_fc);
        phba->sli4_hba.link_state.fault =
                                bf_get(lpfc_acqe_link_fault, acqe_fc);
        phba->sli4_hba.link_state.link_status =
                                bf_get(lpfc_acqe_fc_la_link_status, acqe_fc);

        /*
         * Only select attention types need logical speed modification to what
         * was previously set.
         */
        if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_LINK_UP &&
            phba->sli4_hba.link_state.status < LPFC_FC_LA_TYPE_ACTIVATE_FAIL) {
                if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
                    LPFC_FC_LA_TYPE_LINK_DOWN)
                        phba->sli4_hba.link_state.logical_speed = 0;
                else if (!phba->sli4_hba.conf_trunk)
                        phba->sli4_hba.link_state.logical_speed =
                                bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "2896 Async FC event - Speed:%dGBaud Topology:x%x "
                        "LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
                        "%dMbps Fault:x%x Link Status:x%x\n",
                        phba->sli4_hba.link_state.speed,
                        phba->sli4_hba.link_state.topology,
                        phba->sli4_hba.link_state.status,
                        phba->sli4_hba.link_state.type,
                        phba->sli4_hba.link_state.number,
                        phba->sli4_hba.link_state.logical_speed,
                        phba->sli4_hba.link_state.fault,
                        phba->sli4_hba.link_state.link_status);

        /*
         * The following attention types are informational only, providing
         * further details about link status.  Overwrite the value of
         * link_state.status appropriately.  No further action is required.
         */
        if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_ACTIVATE_FAIL) {
                switch (phba->sli4_hba.link_state.status) {
                case LPFC_FC_LA_TYPE_ACTIVATE_FAIL:
                        log_level = KERN_WARNING;
                        phba->sli4_hba.link_state.status =
                                        LPFC_FC_LA_TYPE_LINK_DOWN;
                        break;
                case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT:
                        /*
                         * During bb credit recovery establishment, receiving
                         * this attention type is normal.  Link Up attention
                         * type is expected to occur before this informational
                         * attention type so keep the Link Up status.
                         */
                        log_level = KERN_INFO;
                        phba->sli4_hba.link_state.status =
                                        LPFC_FC_LA_TYPE_LINK_UP;
                        break;
                default:
                        log_level = KERN_INFO;
                        break;
                }
                lpfc_log_msg(phba, log_level, LOG_SLI,
                             "2992 Async FC event - Informational Link "
                             "Attention Type x%x\n",
                             bf_get(lpfc_acqe_fc_la_att_type, acqe_fc));
                return;
        }

        pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2897 The mboxq allocation failed\n");
                return;
        }
        rc = lpfc_mbox_rsrc_prep(phba, pmb);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2898 The mboxq prep failed\n");
                goto out_free_pmb;
        }

        /* Cleanup any outstanding ELS commands */
        lpfc_els_flush_all_cmd(phba);

        /* Block ELS IOCBs until we have done process link event */
        phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT;

        /* Update link event statistics */
        phba->sli.slistat.link_event++;

        /* Create lpfc_handle_latt mailbox command from link ACQE */
        lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf);
        pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
        pmb->vport = phba->pport;

        if (phba->sli4_hba.link_state.status != LPFC_FC_LA_TYPE_LINK_UP) {
                phba->link_flag &= ~(LS_MDS_LINK_DOWN | LS_MDS_LOOPBACK);

                switch (phba->sli4_hba.link_state.status) {
                case LPFC_FC_LA_TYPE_MDS_LINK_DOWN:
                        phba->link_flag |= LS_MDS_LINK_DOWN;
                        break;
                case LPFC_FC_LA_TYPE_MDS_LOOPBACK:
                        phba->link_flag |= LS_MDS_LOOPBACK;
                        break;
                default:
                        break;
                }

                /* Initialize completion status */
                mb = &pmb->u.mb;
                mb->mbxStatus = MBX_SUCCESS;

                /* Parse port fault information field */
                lpfc_sli4_parse_latt_fault(phba, (void *)acqe_fc);

                /* Parse and translate link attention fields */
                la = (struct lpfc_mbx_read_top *)&pmb->u.mb.un.varReadTop;
                la->eventTag = acqe_fc->event_tag;

                if (phba->sli4_hba.link_state.status ==
                    LPFC_FC_LA_TYPE_UNEXP_WWPN) {
                        bf_set(lpfc_mbx_read_top_att_type, la,
                               LPFC_FC_LA_TYPE_UNEXP_WWPN);
                } else {
                        bf_set(lpfc_mbx_read_top_att_type, la,
                               LPFC_FC_LA_TYPE_LINK_DOWN);
                }
                /* Invoke the mailbox command callback function */
                lpfc_mbx_cmpl_read_topology(phba, pmb);

                return;
        }

        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
        if (rc == MBX_NOT_FINISHED)
                goto out_free_pmb;
        return;

out_free_pmb:
        lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
}

/**
 * lpfc_sli4_async_sli_evt - Process the asynchronous SLI link event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_sli: pointer to the async SLI completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous SLI events.
 **/
static void
lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
{
        char port_name;
        char message[128];
        uint8_t status;
        uint8_t evt_type;
        uint8_t operational = 0;
        struct temp_event temp_event_data;
        struct lpfc_acqe_misconfigured_event *misconfigured;
        struct lpfc_acqe_cgn_signal *cgn_signal;
        struct Scsi_Host  *shost;
        struct lpfc_vport **vports;
        int rc, i, cnt;

        evt_type = bf_get(lpfc_trailer_type, acqe_sli);

        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "2901 Async SLI event - Type:%d, Event Data: x%08x "
                        "x%08x x%08x x%08x\n", evt_type,
                        acqe_sli->event_data1, acqe_sli->event_data2,
                        acqe_sli->event_data3, acqe_sli->trailer);

        port_name = phba->Port[0];
        if (port_name == 0x00)
                port_name = '?'; /* get port name is empty */

        switch (evt_type) {
        case LPFC_SLI_EVENT_TYPE_OVER_TEMP:
                temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
                temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
                temp_event_data.data = (uint32_t)acqe_sli->event_data1;

                lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
                                "3190 Over Temperature:%d Celsius- Port Name %c\n",
                                acqe_sli->event_data1, port_name);

                phba->sfp_warning |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE;
                shost = lpfc_shost_from_vport(phba->pport);
                fc_host_post_vendor_event(shost, fc_get_event_number(),
                                          sizeof(temp_event_data),
                                          (char *)&temp_event_data,
                                          SCSI_NL_VID_TYPE_PCI
                                          | PCI_VENDOR_ID_EMULEX);
                break;
        case LPFC_SLI_EVENT_TYPE_NORM_TEMP:
                temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
                temp_event_data.event_code = LPFC_NORMAL_TEMP;
                temp_event_data.data = (uint32_t)acqe_sli->event_data1;

                lpfc_printf_log(phba, KERN_INFO, LOG_SLI | LOG_LDS_EVENT,
                                "3191 Normal Temperature:%d Celsius - Port Name %c\n",
                                acqe_sli->event_data1, port_name);

                shost = lpfc_shost_from_vport(phba->pport);
                fc_host_post_vendor_event(shost, fc_get_event_number(),
                                          sizeof(temp_event_data),
                                          (char *)&temp_event_data,
                                          SCSI_NL_VID_TYPE_PCI
                                          | PCI_VENDOR_ID_EMULEX);
                break;
        case LPFC_SLI_EVENT_TYPE_MISCONFIGURED:
                misconfigured = (struct lpfc_acqe_misconfigured_event *)
                                        &acqe_sli->event_data1;

                /* fetch the status for this port */
                switch (phba->sli4_hba.lnk_info.lnk_no) {
                case LPFC_LINK_NUMBER_0:
                        status = bf_get(lpfc_sli_misconfigured_port0_state,
                                        &misconfigured->theEvent);
                        operational = bf_get(lpfc_sli_misconfigured_port0_op,
                                        &misconfigured->theEvent);
                        break;
                case LPFC_LINK_NUMBER_1:
                        status = bf_get(lpfc_sli_misconfigured_port1_state,
                                        &misconfigured->theEvent);
                        operational = bf_get(lpfc_sli_misconfigured_port1_op,
                                        &misconfigured->theEvent);
                        break;
                case LPFC_LINK_NUMBER_2:
                        status = bf_get(lpfc_sli_misconfigured_port2_state,
                                        &misconfigured->theEvent);
                        operational = bf_get(lpfc_sli_misconfigured_port2_op,
                                        &misconfigured->theEvent);
                        break;
                case LPFC_LINK_NUMBER_3:
                        status = bf_get(lpfc_sli_misconfigured_port3_state,
                                        &misconfigured->theEvent);
                        operational = bf_get(lpfc_sli_misconfigured_port3_op,
                                        &misconfigured->theEvent);
                        break;
                default:
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3296 "
                                        "LPFC_SLI_EVENT_TYPE_MISCONFIGURED "
                                        "event: Invalid link %d",
                                        phba->sli4_hba.lnk_info.lnk_no);
                        return;
                }

                /* Skip if optic state unchanged */
                if (phba->sli4_hba.lnk_info.optic_state == status)
                        return;

                switch (status) {
                case LPFC_SLI_EVENT_STATUS_VALID:
                        sprintf(message, "Physical Link is functional");
                        break;
                case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
                        sprintf(message, "Optics faulted/incorrectly "
                                "installed/not installed - Reseat optics, "
                                "if issue not resolved, replace.");
                        break;
                case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
                        sprintf(message,
                                "Optics of two types installed - Remove one "
                                "optic or install matching pair of optics.");
                        break;
                case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
                        sprintf(message, "Incompatible optics - Replace with "
                                "compatible optics for card to function.");
                        break;
                case LPFC_SLI_EVENT_STATUS_UNQUALIFIED:
                        sprintf(message, "Unqualified optics - Replace with "
                                "Avago optics for Warranty and Technical "
                                "Support - Link is%s operational",
                                (operational) ? " not" : "");
                        break;
                case LPFC_SLI_EVENT_STATUS_UNCERTIFIED:
                        sprintf(message, "Uncertified optics - Replace with "
                                "Avago-certified optics to enable link "
                                "operation - Link is%s operational",
                                (operational) ? " not" : "");
                        break;
                default:
                        /* firmware is reporting a status we don't know about */
                        sprintf(message, "Unknown event status x%02x", status);
                        break;
                }

                /* Issue READ_CONFIG mbox command to refresh supported speeds */
                rc = lpfc_sli4_read_config(phba);
                if (rc) {
                        phba->lmt = 0;
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "3194 Unable to retrieve supported "
                                        "speeds, rc = 0x%x\n", rc);
                }
                rc = lpfc_sli4_refresh_params(phba);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                        "3174 Unable to update pls support, "
                                        "rc x%x\n", rc);
                }
                vports = lpfc_create_vport_work_array(phba);
                if (vports != NULL) {
                        for (i = 0; i <= phba->max_vports && vports[i] != NULL;
                                        i++) {
                                shost = lpfc_shost_from_vport(vports[i]);
                                lpfc_host_supported_speeds_set(shost);
                        }
                }
                lpfc_destroy_vport_work_array(phba, vports);

                phba->sli4_hba.lnk_info.optic_state = status;
                lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                "3176 Port Name %c %s\n", port_name, message);
                break;
        case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT:
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3192 Remote DPort Test Initiated - "
                                "Event Data1:x%08x Event Data2: x%08x\n",
                                acqe_sli->event_data1, acqe_sli->event_data2);
                break;
        case LPFC_SLI_EVENT_TYPE_PORT_PARAMS_CHG:
                /* Call FW to obtain active parms */
                lpfc_sli4_cgn_parm_chg_evt(phba);
                break;
        case LPFC_SLI_EVENT_TYPE_MISCONF_FAWWN:
                /* Misconfigured WWN. Reports that the SLI Port is configured
                 * to use FA-WWN, but the attached device doesn’t support it.
                 * Event Data1 - N.A, Event Data2 - N.A
                 * This event only happens on the physical port.
                 */
                lpfc_log_msg(phba, KERN_WARNING, LOG_SLI | LOG_DISCOVERY,
                             "2699 Misconfigured FA-PWWN - Attached device "
                             "does not support FA-PWWN\n");
                phba->sli4_hba.fawwpn_flag &= ~LPFC_FAWWPN_FABRIC;
                memset(phba->pport->fc_portname.u.wwn, 0,
                       sizeof(struct lpfc_name));
                break;
        case LPFC_SLI_EVENT_TYPE_EEPROM_FAILURE:
                /* EEPROM failure. No driver action is required */
                lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
                             "2518 EEPROM failure - "
                             "Event Data1: x%08x Event Data2: x%08x\n",
                             acqe_sli->event_data1, acqe_sli->event_data2);
                break;
        case LPFC_SLI_EVENT_TYPE_CGN_SIGNAL:
                if (phba->cmf_active_mode == LPFC_CFG_OFF)
                        break;
                cgn_signal = (struct lpfc_acqe_cgn_signal *)
                                        &acqe_sli->event_data1;
                phba->cgn_acqe_cnt++;

                cnt = bf_get(lpfc_warn_acqe, cgn_signal);
                atomic64_add(cnt, &phba->cgn_acqe_stat.warn);
                atomic64_add(cgn_signal->alarm_cnt, &phba->cgn_acqe_stat.alarm);

                /* no threshold for CMF, even 1 signal will trigger an event */

                /* Alarm overrides warning, so check that first */
                if (cgn_signal->alarm_cnt) {
                        if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
                                /* Keep track of alarm cnt for CMF_SYNC_WQE */
                                atomic_add(cgn_signal->alarm_cnt,
                                           &phba->cgn_sync_alarm_cnt);
                        }
                } else if (cnt) {
                        /* signal action needs to be taken */
                        if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
                            phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
                                /* Keep track of warning cnt for CMF_SYNC_WQE */
                                atomic_add(cnt, &phba->cgn_sync_warn_cnt);
                        }
                }
                break;
        case LPFC_SLI_EVENT_TYPE_RD_SIGNAL:
                /* May be accompanied by a temperature event */
                lpfc_printf_log(phba, KERN_INFO,
                                LOG_SLI | LOG_LINK_EVENT | LOG_LDS_EVENT,
                                "2902 Remote Degrade Signaling: x%08x x%08x "
                                "x%08x\n",
                                acqe_sli->event_data1, acqe_sli->event_data2,
                                acqe_sli->event_data3);
                break;
        case LPFC_SLI_EVENT_TYPE_RESET_CM_STATS:
                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "2905 Reset CM statistics\n");
                lpfc_sli4_async_cmstat_evt(phba);
                break;
        default:
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3193 Unrecognized SLI event, type: 0x%x",
                                evt_type);
                break;
        }
}

/**
 * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport
 * @vport: pointer to vport data structure.
 *
 * This routine is to perform Clear Virtual Link (CVL) on a vport in
 * response to a CVL event.
 *
 * Return the pointer to the ndlp with the vport if successful, otherwise
 * return NULL.
 **/
static struct lpfc_nodelist *
lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
{
        struct lpfc_nodelist *ndlp;
        struct Scsi_Host *shost;
        struct lpfc_hba *phba;

        if (!vport)
                return NULL;
        phba = vport->phba;
        if (!phba)
                return NULL;
        ndlp = lpfc_findnode_did(vport, Fabric_DID);
        if (!ndlp) {
                /* Cannot find existing Fabric ndlp, so allocate a new one */
                ndlp = lpfc_nlp_init(vport, Fabric_DID);
                if (!ndlp)
                        return NULL;
                /* Set the node type */
                ndlp->nlp_type |= NLP_FABRIC;
                /* Put ndlp onto node list */
                lpfc_enqueue_node(vport, ndlp);
        }
        if ((phba->pport->port_state < LPFC_FLOGI) &&
                (phba->pport->port_state != LPFC_VPORT_FAILED))
                return NULL;
        /* If virtual link is not yet instantiated ignore CVL */
        if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC)
                && (vport->port_state != LPFC_VPORT_FAILED))
                return NULL;
        shost = lpfc_shost_from_vport(vport);
        if (!shost)
                return NULL;
        lpfc_linkdown_port(vport);
        lpfc_cleanup_pending_mbox(vport);
        set_bit(FC_VPORT_CVL_RCVD, &vport->fc_flag);

        return ndlp;
}

/**
 * lpfc_sli4_perform_all_vport_cvl - Perform clear virtual link on all vports
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to perform Clear Virtual Link (CVL) on all vports in
 * response to a FCF dead event.
 **/
static void
lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba *phba)
{
        struct lpfc_vport **vports;
        int i;

        vports = lpfc_create_vport_work_array(phba);
        if (vports)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
                        lpfc_sli4_perform_vport_cvl(vports[i]);
        lpfc_destroy_vport_work_array(phba, vports);
}

/**
 * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_fip: pointer to the async fcoe completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous fcoe event.
 **/
static void
lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
                        struct lpfc_acqe_fip *acqe_fip)
{
        uint8_t event_type = bf_get(lpfc_trailer_type, acqe_fip);
        int rc;
        struct lpfc_vport *vport;
        struct lpfc_nodelist *ndlp;
        int active_vlink_present;
        struct lpfc_vport **vports;
        int i;

        phba->fc_eventTag = acqe_fip->event_tag;
        phba->fcoe_eventtag = acqe_fip->event_tag;
        switch (event_type) {
        case LPFC_FIP_EVENT_TYPE_NEW_FCF:
        case LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD:
                if (event_type == LPFC_FIP_EVENT_TYPE_NEW_FCF)
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2546 New FCF event, evt_tag:x%x, "
                                        "index:x%x\n",
                                        acqe_fip->event_tag,
                                        acqe_fip->index);
                else
                        lpfc_printf_log(phba, KERN_WARNING, LOG_FIP |
                                        LOG_DISCOVERY,
                                        "2788 FCF param modified event, "
                                        "evt_tag:x%x, index:x%x\n",
                                        acqe_fip->event_tag,
                                        acqe_fip->index);
                if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
                        /*
                         * During period of FCF discovery, read the FCF
                         * table record indexed by the event to update
                         * FCF roundrobin failover eligible FCF bmask.
                         */
                        lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
                                        LOG_DISCOVERY,
                                        "2779 Read FCF (x%x) for updating "
                                        "roundrobin FCF failover bmask\n",
                                        acqe_fip->index);
                        rc = lpfc_sli4_read_fcf_rec(phba, acqe_fip->index);
                }

                /* If the FCF discovery is in progress, do nothing. */
                spin_lock_irq(&phba->hbalock);
                if (phba->hba_flag & FCF_TS_INPROG) {
                        spin_unlock_irq(&phba->hbalock);
                        break;
                }
                /* If fast FCF failover rescan event is pending, do nothing */
                if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) {
                        spin_unlock_irq(&phba->hbalock);
                        break;
                }

                /* If the FCF has been in discovered state, do nothing. */
                if (phba->fcf.fcf_flag & FCF_SCAN_DONE) {
                        spin_unlock_irq(&phba->hbalock);
                        break;
                }
                spin_unlock_irq(&phba->hbalock);

                /* Otherwise, scan the entire FCF table and re-discover SAN */
                lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
                                "2770 Start FCF table scan per async FCF "
                                "event, evt_tag:x%x, index:x%x\n",
                                acqe_fip->event_tag, acqe_fip->index);
                rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
                                                     LPFC_FCOE_FCF_GET_FIRST);
                if (rc)
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2547 Issue FCF scan read FCF mailbox "
                                        "command failed (x%x)\n", rc);
                break;

        case LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2548 FCF Table full count 0x%x tag 0x%x\n",
                                bf_get(lpfc_acqe_fip_fcf_count, acqe_fip),
                                acqe_fip->event_tag);
                break;

        case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
                phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2549 FCF (x%x) disconnected from network, "
                                 "tag:x%x\n", acqe_fip->index,
                                 acqe_fip->event_tag);
                /*
                 * If we are in the middle of FCF failover process, clear
                 * the corresponding FCF bit in the roundrobin bitmap.
                 */
                spin_lock_irq(&phba->hbalock);
                if ((phba->fcf.fcf_flag & FCF_DISCOVERY) &&
                    (phba->fcf.current_rec.fcf_indx != acqe_fip->index)) {
                        spin_unlock_irq(&phba->hbalock);
                        /* Update FLOGI FCF failover eligible FCF bmask */
                        lpfc_sli4_fcf_rr_index_clear(phba, acqe_fip->index);
                        break;
                }
                spin_unlock_irq(&phba->hbalock);

                /* If the event is not for currently used fcf do nothing */
                if (phba->fcf.current_rec.fcf_indx != acqe_fip->index)
                        break;

                /*
                 * Otherwise, request the port to rediscover the entire FCF
                 * table for a fast recovery from case that the current FCF
                 * is no longer valid as we are not in the middle of FCF
                 * failover process already.
                 */
                spin_lock_irq(&phba->hbalock);
                /* Mark the fast failover process in progress */
                phba->fcf.fcf_flag |= FCF_DEAD_DISC;
                spin_unlock_irq(&phba->hbalock);

                lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
                                "2771 Start FCF fast failover process due to "
                                "FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
                                "\n", acqe_fip->event_tag, acqe_fip->index);
                rc = lpfc_sli4_redisc_fcf_table(phba);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
                                        LOG_TRACE_EVENT,
                                        "2772 Issue FCF rediscover mailbox "
                                        "command failed, fail through to FCF "
                                        "dead event\n");
                        spin_lock_irq(&phba->hbalock);
                        phba->fcf.fcf_flag &= ~FCF_DEAD_DISC;
                        spin_unlock_irq(&phba->hbalock);
                        /*
                         * Last resort will fail over by treating this
                         * as a link down to FCF registration.
                         */
                        lpfc_sli4_fcf_dead_failthrough(phba);
                } else {
                        /* Reset FCF roundrobin bmask for new discovery */
                        lpfc_sli4_clear_fcf_rr_bmask(phba);
                        /*
                         * Handling fast FCF failover to a DEAD FCF event is
                         * considered equalivant to receiving CVL to all vports.
                         */
                        lpfc_sli4_perform_all_vport_cvl(phba);
                }
                break;
        case LPFC_FIP_EVENT_TYPE_CVL:
                phba->fcoe_cvl_eventtag = acqe_fip->event_tag;
                lpfc_printf_log(phba, KERN_ERR,
                                LOG_TRACE_EVENT,
                        "2718 Clear Virtual Link Received for VPI 0x%x"
                        " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);

                vport = lpfc_find_vport_by_vpid(phba,
                                                acqe_fip->index);
                ndlp = lpfc_sli4_perform_vport_cvl(vport);
                if (!ndlp)
                        break;
                active_vlink_present = 0;

                vports = lpfc_create_vport_work_array(phba);
                if (vports) {
                        for (i = 0; i <= phba->max_vports && vports[i] != NULL;
                                        i++) {
                                if (!test_bit(FC_VPORT_CVL_RCVD,
                                              &vports[i]->fc_flag) &&
                                    vports[i]->port_state > LPFC_FDISC) {
                                        active_vlink_present = 1;
                                        break;
                                }
                        }
                        lpfc_destroy_vport_work_array(phba, vports);
                }

                /*
                 * Don't re-instantiate if vport is marked for deletion.
                 * If we are here first then vport_delete is going to wait
                 * for discovery to complete.
                 */
                if (!test_bit(FC_UNLOADING, &vport->load_flag) &&
                    active_vlink_present) {
                        /*
                         * If there are other active VLinks present,
                         * re-instantiate the Vlink using FDISC.
                         */
                        mod_timer(&ndlp->nlp_delayfunc,
                                  jiffies + msecs_to_jiffies(1000));
                        spin_lock_irq(&ndlp->lock);
                        ndlp->nlp_flag |= NLP_DELAY_TMO;
                        spin_unlock_irq(&ndlp->lock);
                        ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
                        vport->port_state = LPFC_FDISC;
                } else {
                        /*
                         * Otherwise, we request port to rediscover
                         * the entire FCF table for a fast recovery
                         * from possible case that the current FCF
                         * is no longer valid if we are not already
                         * in the FCF failover process.
                         */
                        spin_lock_irq(&phba->hbalock);
                        if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
                                spin_unlock_irq(&phba->hbalock);
                                break;
                        }
                        /* Mark the fast failover process in progress */
                        phba->fcf.fcf_flag |= FCF_ACVL_DISC;
                        spin_unlock_irq(&phba->hbalock);
                        lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
                                        LOG_DISCOVERY,
                                        "2773 Start FCF failover per CVL, "
                                        "evt_tag:x%x\n", acqe_fip->event_tag);
                        rc = lpfc_sli4_redisc_fcf_table(phba);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
                                                LOG_TRACE_EVENT,
                                                "2774 Issue FCF rediscover "
                                                "mailbox command failed, "
                                                "through to CVL event\n");
                                spin_lock_irq(&phba->hbalock);
                                phba->fcf.fcf_flag &= ~FCF_ACVL_DISC;
                                spin_unlock_irq(&phba->hbalock);
                                /*
                                 * Last resort will be re-try on the
                                 * the current registered FCF entry.
                                 */
                                lpfc_retry_pport_discovery(phba);
                        } else
                                /*
                                 * Reset FCF roundrobin bmask for new
                                 * discovery.
                                 */
                                lpfc_sli4_clear_fcf_rr_bmask(phba);
                }
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0288 Unknown FCoE event type 0x%x event tag "
                                "0x%x\n", event_type, acqe_fip->event_tag);
                break;
        }
}

/**
 * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_dcbx: pointer to the async dcbx completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous dcbx event.
 **/
static void
lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
                         struct lpfc_acqe_dcbx *acqe_dcbx)
{
        phba->fc_eventTag = acqe_dcbx->event_tag;
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "0290 The SLI4 DCBX asynchronous event is not "
                        "handled yet\n");
}

/**
 * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event
 * @phba: pointer to lpfc hba data structure.
 * @acqe_grp5: pointer to the async grp5 completion queue entry.
 *
 * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event
 * is an asynchronous notified of a logical link speed change.  The Port
 * reports the logical link speed in units of 10Mbps.
 **/
static void
lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba,
                         struct lpfc_acqe_grp5 *acqe_grp5)
{
        uint16_t prev_ll_spd;

        phba->fc_eventTag = acqe_grp5->event_tag;
        phba->fcoe_eventtag = acqe_grp5->event_tag;
        prev_ll_spd = phba->sli4_hba.link_state.logical_speed;
        phba->sli4_hba.link_state.logical_speed =
                (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)) * 10;
        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "2789 GRP5 Async Event: Updating logical link speed "
                        "from %dMbps to %dMbps\n", prev_ll_spd,
                        phba->sli4_hba.link_state.logical_speed);
}

/**
 * lpfc_sli4_async_cmstat_evt - Process the asynchronous cmstat event
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to handle the SLI4 asynchronous cmstat event. A cmstat event
 * is an asynchronous notification of a request to reset CM stats.
 **/
static void
lpfc_sli4_async_cmstat_evt(struct lpfc_hba *phba)
{
        if (!phba->cgn_i)
                return;
        lpfc_init_congestion_stat(phba);
}

/**
 * lpfc_cgn_params_val - Validate FW congestion parameters.
 * @phba: pointer to lpfc hba data structure.
 * @p_cfg_param: pointer to FW provided congestion parameters.
 *
 * This routine validates the congestion parameters passed
 * by the FW to the driver via an ACQE event.
 **/
static void
lpfc_cgn_params_val(struct lpfc_hba *phba, struct lpfc_cgn_param *p_cfg_param)
{
        spin_lock_irq(&phba->hbalock);

        if (!lpfc_rangecheck(p_cfg_param->cgn_param_mode, LPFC_CFG_OFF,
                             LPFC_CFG_MONITOR)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT,
                                "6225 CMF mode param out of range: %d\n",
                                 p_cfg_param->cgn_param_mode);
                p_cfg_param->cgn_param_mode = LPFC_CFG_OFF;
        }

        spin_unlock_irq(&phba->hbalock);
}

static const char * const lpfc_cmf_mode_to_str[] = {
        "OFF",
        "MANAGED",
        "MONITOR",
};

/**
 * lpfc_cgn_params_parse - Process a FW cong parm change event
 * @phba: pointer to lpfc hba data structure.
 * @p_cgn_param: pointer to a data buffer with the FW cong params.
 * @len: the size of pdata in bytes.
 *
 * This routine validates the congestion management buffer signature
 * from the FW, validates the contents and makes corrections for
 * valid, in-range values.  If the signature magic is correct and
 * after parameter validation, the contents are copied to the driver's
 * @phba structure. If the magic is incorrect, an error message is
 * logged.
 **/
static void
lpfc_cgn_params_parse(struct lpfc_hba *phba,
                      struct lpfc_cgn_param *p_cgn_param, uint32_t len)
{
        struct lpfc_cgn_info *cp;
        uint32_t crc, oldmode;
        char acr_string[4] = {0};

        /* Make sure the FW has encoded the correct magic number to
         * validate the congestion parameter in FW memory.
         */
        if (p_cgn_param->cgn_param_magic == LPFC_CFG_PARAM_MAGIC_NUM) {
                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT,
                                "4668 FW cgn parm buffer data: "
                                "magic 0x%x version %d mode %d "
                                "level0 %d level1 %d "
                                "level2 %d byte13 %d "
                                "byte14 %d byte15 %d "
                                "byte11 %d byte12 %d activeMode %d\n",
                                p_cgn_param->cgn_param_magic,
                                p_cgn_param->cgn_param_version,
                                p_cgn_param->cgn_param_mode,
                                p_cgn_param->cgn_param_level0,
                                p_cgn_param->cgn_param_level1,
                                p_cgn_param->cgn_param_level2,
                                p_cgn_param->byte13,
                                p_cgn_param->byte14,
                                p_cgn_param->byte15,
                                p_cgn_param->byte11,
                                p_cgn_param->byte12,
                                phba->cmf_active_mode);

                oldmode = phba->cmf_active_mode;

                /* Any parameters out of range are corrected to defaults
                 * by this routine.  No need to fail.
                 */
                lpfc_cgn_params_val(phba, p_cgn_param);

                /* Parameters are verified, move them into driver storage */
                spin_lock_irq(&phba->hbalock);
                memcpy(&phba->cgn_p, p_cgn_param,
                       sizeof(struct lpfc_cgn_param));

                /* Update parameters in congestion info buffer now */
                if (phba->cgn_i) {
                        cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;
                        cp->cgn_info_mode = phba->cgn_p.cgn_param_mode;
                        cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0;
                        cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1;
                        cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2;
                        crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ,
                                                  LPFC_CGN_CRC32_SEED);
                        cp->cgn_info_crc = cpu_to_le32(crc);
                }
                spin_unlock_irq(&phba->hbalock);

                phba->cmf_active_mode = phba->cgn_p.cgn_param_mode;

                switch (oldmode) {
                case LPFC_CFG_OFF:
                        if (phba->cgn_p.cgn_param_mode != LPFC_CFG_OFF) {
                                /* Turning CMF on */
                                lpfc_cmf_start(phba);

                                if (phba->link_state >= LPFC_LINK_UP) {
                                        phba->cgn_reg_fpin =
                                                phba->cgn_init_reg_fpin;
                                        phba->cgn_reg_signal =
                                                phba->cgn_init_reg_signal;
                                        lpfc_issue_els_edc(phba->pport, 0);
                                }
                        }
                        break;
                case LPFC_CFG_MANAGED:
                        switch (phba->cgn_p.cgn_param_mode) {
                        case LPFC_CFG_OFF:
                                /* Turning CMF off */
                                lpfc_cmf_stop(phba);
                                if (phba->link_state >= LPFC_LINK_UP)
                                        lpfc_issue_els_edc(phba->pport, 0);
                                break;
                        case LPFC_CFG_MONITOR:
                                phba->cmf_max_bytes_per_interval =
                                        phba->cmf_link_byte_count;

                                /* Resume blocked IO - unblock on workqueue */
                                queue_work(phba->wq,
                                           &phba->unblock_request_work);
                                break;
                        }
                        break;
                case LPFC_CFG_MONITOR:
                        switch (phba->cgn_p.cgn_param_mode) {
                        case LPFC_CFG_OFF:
                                /* Turning CMF off */
                                lpfc_cmf_stop(phba);
                                if (phba->link_state >= LPFC_LINK_UP)
                                        lpfc_issue_els_edc(phba->pport, 0);
                                break;
                        case LPFC_CFG_MANAGED:
                                lpfc_cmf_signal_init(phba);
                                break;
                        }
                        break;
                }
                if (oldmode != LPFC_CFG_OFF ||
                    oldmode != phba->cgn_p.cgn_param_mode) {
                        if (phba->cgn_p.cgn_param_mode == LPFC_CFG_MANAGED)
                                scnprintf(acr_string, sizeof(acr_string), "%u",
                                          phba->cgn_p.cgn_param_level0);
                        else
                                scnprintf(acr_string, sizeof(acr_string), "NA");

                        dev_info(&phba->pcidev->dev, "%d: "
                                 "4663 CMF: Mode %s acr %s\n",
                                 phba->brd_no,
                                 lpfc_cmf_mode_to_str
                                 [phba->cgn_p.cgn_param_mode],
                                 acr_string);
                }
        } else {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
                                "4669 FW cgn parm buf wrong magic 0x%x "
                                "version %d\n", p_cgn_param->cgn_param_magic,
                                p_cgn_param->cgn_param_version);
        }
}

/**
 * lpfc_sli4_cgn_params_read - Read and Validate FW congestion parameters.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine issues a read_object mailbox command to
 * get the congestion management parameters from the FW
 * parses it and updates the driver maintained values.
 *
 * Returns
 *  0     if the object was empty
 *  -Eval if an error was encountered
 *  Count if bytes were read from object
 **/
int
lpfc_sli4_cgn_params_read(struct lpfc_hba *phba)
{
        int ret = 0;
        struct lpfc_cgn_param *p_cgn_param = NULL;
        u32 *pdata = NULL;
        u32 len = 0;

        /* Find out if the FW has a new set of congestion parameters. */
        len = sizeof(struct lpfc_cgn_param);
        pdata = kzalloc(len, GFP_KERNEL);
        if (!pdata)
                return -ENOMEM;
        ret = lpfc_read_object(phba, (char *)LPFC_PORT_CFG_NAME,
                               pdata, len);

        /* 0 means no data.  A negative means error.  A positive means
         * bytes were copied.
         */
        if (!ret) {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
                                "4670 CGN RD OBJ returns no data\n");
                goto rd_obj_err;
        } else if (ret < 0) {
                /* Some error.  Just exit and return it to the caller.*/
                goto rd_obj_err;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT,
                        "6234 READ CGN PARAMS Successful %d\n", len);

        /* Parse data pointer over len and update the phba congestion
         * parameters with values passed back.  The receive rate values
         * may have been altered in FW, but take no action here.
         */
        p_cgn_param = (struct lpfc_cgn_param *)pdata;
        lpfc_cgn_params_parse(phba, p_cgn_param, len);

 rd_obj_err:
        kfree(pdata);
        return ret;
}

/**
 * lpfc_sli4_cgn_parm_chg_evt - Process a FW congestion param change event
 * @phba: pointer to lpfc hba data structure.
 *
 * The FW generated Async ACQE SLI event calls this routine when
 * the event type is an SLI Internal Port Event and the Event Code
 * indicates a change to the FW maintained congestion parameters.
 *
 * This routine executes a Read_Object mailbox call to obtain the
 * current congestion parameters maintained in FW and corrects
 * the driver's active congestion parameters.
 *
 * The acqe event is not passed because there is no further data
 * required.
 *
 * Returns nonzero error if event processing encountered an error.
 * Zero otherwise for success.
 **/
static int
lpfc_sli4_cgn_parm_chg_evt(struct lpfc_hba *phba)
{
        int ret = 0;

        if (!phba->sli4_hba.pc_sli4_params.cmf) {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
                                "4664 Cgn Evt when E2E off. Drop event\n");
                return -EACCES;
        }

        /* If the event is claiming an empty object, it's ok.  A write
         * could have cleared it.  Only error is a negative return
         * status.
         */
        ret = lpfc_sli4_cgn_params_read(phba);
        if (ret < 0) {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
                                "4667 Error reading Cgn Params (%d)\n",
                                ret);
        } else if (!ret) {
                lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
                                "4673 CGN Event empty object.\n");
        }
        return ret;
}

/**
 * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked by the worker thread to process all the pending
 * SLI4 asynchronous events.
 **/
void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
{
        struct lpfc_cq_event *cq_event;
        unsigned long iflags;

        /* First, declare the async event has been handled */
        spin_lock_irqsave(&phba->hbalock, iflags);
        phba->hba_flag &= ~ASYNC_EVENT;
        spin_unlock_irqrestore(&phba->hbalock, iflags);

        /* Now, handle all the async events */
        spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags);
        while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
                list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
                                 cq_event, struct lpfc_cq_event, list);
                spin_unlock_irqrestore(&phba->sli4_hba.asynce_list_lock,
                                       iflags);

                /* Process the asynchronous event */
                switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
                case LPFC_TRAILER_CODE_LINK:
                        lpfc_sli4_async_link_evt(phba,
                                                 &cq_event->cqe.acqe_link);
                        break;
                case LPFC_TRAILER_CODE_FCOE:
                        lpfc_sli4_async_fip_evt(phba, &cq_event->cqe.acqe_fip);
                        break;
                case LPFC_TRAILER_CODE_DCBX:
                        lpfc_sli4_async_dcbx_evt(phba,
                                                 &cq_event->cqe.acqe_dcbx);
                        break;
                case LPFC_TRAILER_CODE_GRP5:
                        lpfc_sli4_async_grp5_evt(phba,
                                                 &cq_event->cqe.acqe_grp5);
                        break;
                case LPFC_TRAILER_CODE_FC:
                        lpfc_sli4_async_fc_evt(phba, &cq_event->cqe.acqe_fc);
                        break;
                case LPFC_TRAILER_CODE_SLI:
                        lpfc_sli4_async_sli_evt(phba, &cq_event->cqe.acqe_sli);
                        break;
                default:
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "1804 Invalid asynchronous event code: "
                                        "x%x\n", bf_get(lpfc_trailer_code,
                                        &cq_event->cqe.mcqe_cmpl));
                        break;
                }

                /* Free the completion event processed to the free pool */
                lpfc_sli4_cq_event_release(phba, cq_event);
                spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags);
        }
        spin_unlock_irqrestore(&phba->sli4_hba.asynce_list_lock, iflags);
}

/**
 * lpfc_sli4_fcf_redisc_event_proc - Process fcf table rediscovery event
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked by the worker thread to process FCF table
 * rediscovery pending completion event.
 **/
void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *phba)
{
        int rc;

        spin_lock_irq(&phba->hbalock);
        /* Clear FCF rediscovery timeout event */
        phba->fcf.fcf_flag &= ~FCF_REDISC_EVT;
        /* Clear driver fast failover FCF record flag */
        phba->fcf.failover_rec.flag = 0;
        /* Set state for FCF fast failover */
        phba->fcf.fcf_flag |= FCF_REDISC_FOV;
        spin_unlock_irq(&phba->hbalock);

        /* Scan FCF table from the first entry to re-discover SAN */
        lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
                        "2777 Start post-quiescent FCF table scan\n");
        rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
        if (rc)
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2747 Issue FCF scan read FCF mailbox "
                                "command failed 0x%x\n", rc);
}

/**
 * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
 * @phba: pointer to lpfc hba data structure.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine is invoked to set up the per HBA PCI-Device group function
 * API jump table entries.
 *
 * Return: 0 if success, otherwise -ENODEV
 **/
int
lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
        int rc;

        /* Set up lpfc PCI-device group */
        phba->pci_dev_grp = dev_grp;

        /* The LPFC_PCI_DEV_OC uses SLI4 */
        if (dev_grp == LPFC_PCI_DEV_OC)
                phba->sli_rev = LPFC_SLI_REV4;

        /* Set up device INIT API function jump table */
        rc = lpfc_init_api_table_setup(phba, dev_grp);
        if (rc)
                return -ENODEV;
        /* Set up SCSI API function jump table */
        rc = lpfc_scsi_api_table_setup(phba, dev_grp);
        if (rc)
                return -ENODEV;
        /* Set up SLI API function jump table */
        rc = lpfc_sli_api_table_setup(phba, dev_grp);
        if (rc)
                return -ENODEV;
        /* Set up MBOX API function jump table */
        rc = lpfc_mbox_api_table_setup(phba, dev_grp);
        if (rc)
                return -ENODEV;

        return 0;
}

/**
 * lpfc_log_intr_mode - Log the active interrupt mode
 * @phba: pointer to lpfc hba data structure.
 * @intr_mode: active interrupt mode adopted.
 *
 * This routine it invoked to log the currently used active interrupt mode
 * to the device.
 **/
static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
{
        switch (intr_mode) {
        case 0:
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0470 Enable INTx interrupt mode.\n");
                break;
        case 1:
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0481 Enabled MSI interrupt mode.\n");
                break;
        case 2:
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0480 Enabled MSI-X interrupt mode.\n");
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0482 Illegal interrupt mode.\n");
                break;
        }
        return;
}

/**
 * lpfc_enable_pci_dev - Enable a generic PCI device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the PCI device that is common to all
 * PCI devices.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_enable_pci_dev(struct lpfc_hba *phba)
{
        struct pci_dev *pdev;

        /* Obtain PCI device reference */
        if (!phba->pcidev)
                goto out_error;
        else
                pdev = phba->pcidev;
        /* Enable PCI device */
        if (pci_enable_device_mem(pdev))
                goto out_error;
        /* Request PCI resource for the device */
        if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME))
                goto out_disable_device;
        /* Set up device as PCI master and save state for EEH */
        pci_set_master(pdev);
        pci_try_set_mwi(pdev);
        pci_save_state(pdev);

        /* PCIe EEH recovery on powerpc platforms needs fundamental reset */
        if (pci_is_pcie(pdev))
                pdev->needs_freset = 1;

        return 0;

out_disable_device:
        pci_disable_device(pdev);
out_error:
        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                        "1401 Failed to enable pci device\n");
        return -ENODEV;
}

/**
 * lpfc_disable_pci_dev - Disable a generic PCI device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable the PCI device that is common to all
 * PCI devices.
 **/
static void
lpfc_disable_pci_dev(struct lpfc_hba *phba)
{
        struct pci_dev *pdev;

        /* Obtain PCI device reference */
        if (!phba->pcidev)
                return;
        else
                pdev = phba->pcidev;
        /* Release PCI resource and disable PCI device */
        pci_release_mem_regions(pdev);
        pci_disable_device(pdev);

        return;
}

/**
 * lpfc_reset_hba - Reset a hba
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to reset a hba device. It brings the HBA
 * offline, performs a board restart, and then brings the board back
 * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
 * on outstanding mailbox commands.
 **/
void
lpfc_reset_hba(struct lpfc_hba *phba)
{
        int rc = 0;

        /* If resets are disabled then set error state and return. */
        if (!phba->cfg_enable_hba_reset) {
                phba->link_state = LPFC_HBA_ERROR;
                return;
        }

        /* If not LPFC_SLI_ACTIVE, force all IO to be flushed */
        if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) {
                lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        } else {
                if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) {
                        /* Perform a PCI function reset to start from clean */
                        rc = lpfc_pci_function_reset(phba);
                        lpfc_els_flush_all_cmd(phba);
                }
                lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
                lpfc_sli_flush_io_rings(phba);
        }
        lpfc_offline(phba);
        clear_bit(MBX_TMO_ERR, &phba->bit_flags);
        if (unlikely(rc)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
                                "8888 PCI function reset failed rc %x\n",
                                rc);
        } else {
                lpfc_sli_brdrestart(phba);
                lpfc_online(phba);
                lpfc_unblock_mgmt_io(phba);
        }
}

/**
 * lpfc_sli_sriov_nr_virtfn_get - Get the number of sr-iov virtual functions
 * @phba: pointer to lpfc hba data structure.
 *
 * This function enables the PCI SR-IOV virtual functions to a physical
 * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
 * enable the number of virtual functions to the physical function. As
 * not all devices support SR-IOV, the return code from the pci_enable_sriov()
 * API call does not considered as an error condition for most of the device.
 **/
uint16_t
lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *phba)
{
        struct pci_dev *pdev = phba->pcidev;
        uint16_t nr_virtfn;
        int pos;

        pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
        if (pos == 0)
                return 0;

        pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF, &nr_virtfn);
        return nr_virtfn;
}

/**
 * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions
 * @phba: pointer to lpfc hba data structure.
 * @nr_vfn: number of virtual functions to be enabled.
 *
 * This function enables the PCI SR-IOV virtual functions to a physical
 * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to
 * enable the number of virtual functions to the physical function. As
 * not all devices support SR-IOV, the return code from the pci_enable_sriov()
 * API call does not considered as an error condition for most of the device.
 **/
int
lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn)
{
        struct pci_dev *pdev = phba->pcidev;
        uint16_t max_nr_vfn;
        int rc;

        max_nr_vfn = lpfc_sli_sriov_nr_virtfn_get(phba);
        if (nr_vfn > max_nr_vfn) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3057 Requested vfs (%d) greater than "
                                "supported vfs (%d)", nr_vfn, max_nr_vfn);
                return -EINVAL;
        }

        rc = pci_enable_sriov(pdev, nr_vfn);
        if (rc) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "2806 Failed to enable sriov on this device "
                                "with vfn number nr_vf:%d, rc:%d\n",
                                nr_vfn, rc);
        } else
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "2807 Successful enable sriov on this device "
                                "with vfn number nr_vf:%d\n", nr_vfn);
        return rc;
}

static void
lpfc_unblock_requests_work(struct work_struct *work)
{
        struct lpfc_hba *phba = container_of(work, struct lpfc_hba,
                                             unblock_request_work);

        lpfc_unblock_requests(phba);
}

/**
 * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources before the
 * device specific resource setup to support the HBA device it attached to.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
{
        struct lpfc_sli *psli = &phba->sli;

        /*
         * Driver resources common to all SLI revisions
         */
        atomic_set(&phba->fast_event_count, 0);
        atomic_set(&phba->dbg_log_idx, 0);
        atomic_set(&phba->dbg_log_cnt, 0);
        atomic_set(&phba->dbg_log_dmping, 0);
        spin_lock_init(&phba->hbalock);

        /* Initialize port_list spinlock */
        spin_lock_init(&phba->port_list_lock);
        INIT_LIST_HEAD(&phba->port_list);

        INIT_LIST_HEAD(&phba->work_list);

        /* Initialize the wait queue head for the kernel thread */
        init_waitqueue_head(&phba->work_waitq);

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "1403 Protocols supported %s %s %s\n",
                        ((phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ?
                                "SCSI" : " "),
                        ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) ?
                                "NVME" : " "),
                        (phba->nvmet_support ? "NVMET" : " "));

        /* Initialize the IO buffer list used by driver for SLI3 SCSI */
        spin_lock_init(&phba->scsi_buf_list_get_lock);
        INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_get);
        spin_lock_init(&phba->scsi_buf_list_put_lock);
        INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list_put);

        /* Initialize the fabric iocb list */
        INIT_LIST_HEAD(&phba->fabric_iocb_list);

        /* Initialize list to save ELS buffers */
        INIT_LIST_HEAD(&phba->elsbuf);

        /* Initialize FCF connection rec list */
        INIT_LIST_HEAD(&phba->fcf_conn_rec_list);

        /* Initialize OAS configuration list */
        spin_lock_init(&phba->devicelock);
        INIT_LIST_HEAD(&phba->luns);

        /* MBOX heartbeat timer */
        timer_setup(&psli->mbox_tmo, lpfc_mbox_timeout, 0);
        /* Fabric block timer */
        timer_setup(&phba->fabric_block_timer, lpfc_fabric_block_timeout, 0);
        /* EA polling mode timer */
        timer_setup(&phba->eratt_poll, lpfc_poll_eratt, 0);
        /* Heartbeat timer */
        timer_setup(&phba->hb_tmofunc, lpfc_hb_timeout, 0);

        INIT_DELAYED_WORK(&phba->eq_delay_work, lpfc_hb_eq_delay_work);

        INIT_DELAYED_WORK(&phba->idle_stat_delay_work,
                          lpfc_idle_stat_delay_work);
        INIT_WORK(&phba->unblock_request_work, lpfc_unblock_requests_work);
        return 0;
}

/**
 * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources specific to
 * support the SLI-3 HBA device it attached to.
 *
 * Return codes
 * 0 - successful
 * other values - error
 **/
static int
lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
{
        int rc, entry_sz;

        /*
         * Initialize timers used by driver
         */

        /* FCP polling mode timer */
        timer_setup(&phba->fcp_poll_timer, lpfc_poll_timeout, 0);

        /* Host attention work mask setup */
        phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
        phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));

        /* Get all the module params for configuring this host */
        lpfc_get_cfgparam(phba);
        /* Set up phase-1 common device driver resources */

        rc = lpfc_setup_driver_resource_phase1(phba);
        if (rc)
                return -ENODEV;

        if (!phba->sli.sli3_ring)
                phba->sli.sli3_ring = kcalloc(LPFC_SLI3_MAX_RING,
                                              sizeof(struct lpfc_sli_ring),
                                              GFP_KERNEL);
        if (!phba->sli.sli3_ring)
                return -ENOMEM;

        /*
         * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size
         * used to create the sg_dma_buf_pool must be dynamically calculated.
         */

        if (phba->sli_rev == LPFC_SLI_REV4)
                entry_sz = sizeof(struct sli4_sge);
        else
                entry_sz = sizeof(struct ulp_bde64);

        /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */
        if (phba->cfg_enable_bg) {
                /*
                 * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd,
                 * the FCP rsp, and a BDE for each. Sice we have no control
                 * over how many protection data segments the SCSI Layer
                 * will hand us (ie: there could be one for every block
                 * in the IO), we just allocate enough BDEs to accomidate
                 * our max amount and we need to limit lpfc_sg_seg_cnt to
                 * minimize the risk of running out.
                 */
                phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
                        sizeof(struct fcp_rsp) +
                        (LPFC_MAX_SG_SEG_CNT * entry_sz);

                if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF)
                        phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF;

                /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */
                phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT;
        } else {
                /*
                 * The scsi_buf for a regular I/O will hold the FCP cmnd,
                 * the FCP rsp, a BDE for each, and a BDE for up to
                 * cfg_sg_seg_cnt data segments.
                 */
                phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
                        sizeof(struct fcp_rsp) +
                        ((phba->cfg_sg_seg_cnt + 2) * entry_sz);

                /* Total BDEs in BPL for scsi_sg_list */
                phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
                        "9088 INIT sg_tablesize:%d dmabuf_size:%d total_bde:%d\n",
                        phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
                        phba->cfg_total_seg_cnt);

        phba->max_vpi = LPFC_MAX_VPI;
        /* This will be set to correct value after config_port mbox */
        phba->max_vports = 0;

        /*
         * Initialize the SLI Layer to run with lpfc HBAs.
         */
        lpfc_sli_setup(phba);
        lpfc_sli_queue_init(phba);

        /* Allocate device driver memory */
        if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
                return -ENOMEM;

        phba->lpfc_sg_dma_buf_pool =
                dma_pool_create("lpfc_sg_dma_buf_pool",
                                &phba->pcidev->dev, phba->cfg_sg_dma_buf_size,
                                BPL_ALIGN_SZ, 0);

        if (!phba->lpfc_sg_dma_buf_pool)
                goto fail_free_mem;

        phba->lpfc_cmd_rsp_buf_pool =
                        dma_pool_create("lpfc_cmd_rsp_buf_pool",
                                        &phba->pcidev->dev,
                                        sizeof(struct fcp_cmnd) +
                                        sizeof(struct fcp_rsp),
                                        BPL_ALIGN_SZ, 0);

        if (!phba->lpfc_cmd_rsp_buf_pool)
                goto fail_free_dma_buf_pool;

        /*
         * Enable sr-iov virtual functions if supported and configured
         * through the module parameter.
         */
        if (phba->cfg_sriov_nr_virtfn > 0) {
                rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
                                                 phba->cfg_sriov_nr_virtfn);
                if (rc) {
                        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                        "2808 Requested number of SR-IOV "
                                        "virtual functions (%d) is not "
                                        "supported\n",
                                        phba->cfg_sriov_nr_virtfn);
                        phba->cfg_sriov_nr_virtfn = 0;
                }
        }

        return 0;

fail_free_dma_buf_pool:
        dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
        phba->lpfc_sg_dma_buf_pool = NULL;
fail_free_mem:
        lpfc_mem_free(phba);
        return -ENOMEM;
}

/**
 * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up
 * specific for supporting the SLI-3 HBA device it attached to.
 **/
static void
lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
{
        /* Free device driver memory allocated */
        lpfc_mem_free_all(phba);

        return;
}

/**
 * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources specific to
 * support the SLI-4 HBA device it attached to.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *mboxq;
        MAILBOX_t *mb;
        int rc, i, max_buf_size;
        int longs;
        int extra;
        uint64_t wwn;
        u32 if_type;
        u32 if_fam;

        phba->sli4_hba.num_present_cpu = lpfc_present_cpu;
        phba->sli4_hba.num_possible_cpu = cpumask_last(cpu_possible_mask) + 1;
        phba->sli4_hba.curr_disp_cpu = 0;

        /* Get all the module params for configuring this host */
        lpfc_get_cfgparam(phba);

        /* Set up phase-1 common device driver resources */
        rc = lpfc_setup_driver_resource_phase1(phba);
        if (rc)
                return -ENODEV;

        /* Before proceed, wait for POST done and device ready */
        rc = lpfc_sli4_post_status_check(phba);
        if (rc)
                return -ENODEV;

        /* Allocate all driver workqueues here */

        /* The lpfc_wq workqueue for deferred irq use */
        phba->wq = alloc_workqueue("lpfc_wq", WQ_MEM_RECLAIM, 0);
        if (!phba->wq)
                return -ENOMEM;

        /*
         * Initialize timers used by driver
         */

        timer_setup(&phba->rrq_tmr, lpfc_rrq_timeout, 0);

        /* FCF rediscover timer */
        timer_setup(&phba->fcf.redisc_wait, lpfc_sli4_fcf_redisc_wait_tmo, 0);

        /* CMF congestion timer */
        hrtimer_init(&phba->cmf_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
        phba->cmf_timer.function = lpfc_cmf_timer;
        /* CMF 1 minute stats collection timer */
        hrtimer_init(&phba->cmf_stats_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
        phba->cmf_stats_timer.function = lpfc_cmf_stats_timer;

        /*
         * Control structure for handling external multi-buffer mailbox
         * command pass-through.
         */
        memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0,
                sizeof(struct lpfc_mbox_ext_buf_ctx));
        INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);

        phba->max_vpi = LPFC_MAX_VPI;

        /* This will be set to correct value after the read_config mbox */
        phba->max_vports = 0;

        /* Program the default value of vlan_id and fc_map */
        phba->valid_vlan = 0;
        phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
        phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
        phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;

        /*
         * For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands
         * we will associate a new ring, for each EQ/CQ/WQ tuple.
         * The WQ create will allocate the ring.
         */

        /* Initialize buffer queue management fields */
        INIT_LIST_HEAD(&phba->hbqs[LPFC_ELS_HBQ].hbq_buffer_list);
        phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
        phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;

        /* for VMID idle timeout if VMID is enabled */
        if (lpfc_is_vmid_enabled(phba))
                timer_setup(&phba->inactive_vmid_poll, lpfc_vmid_poll, 0);

        /*
         * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
         */
        /* Initialize the Abort buffer list used by driver */
        spin_lock_init(&phba->sli4_hba.abts_io_buf_list_lock);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_io_buf_list);

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                /* Initialize the Abort nvme buffer list used by driver */
                spin_lock_init(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
                INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_io_wait_list);
                spin_lock_init(&phba->sli4_hba.t_active_list_lock);
                INIT_LIST_HEAD(&phba->sli4_hba.t_active_ctx_list);
        }

        /* This abort list used by worker thread */
        spin_lock_init(&phba->sli4_hba.sgl_list_lock);
        spin_lock_init(&phba->sli4_hba.nvmet_io_wait_lock);
        spin_lock_init(&phba->sli4_hba.asynce_list_lock);
        spin_lock_init(&phba->sli4_hba.els_xri_abrt_list_lock);

        /*
         * Initialize driver internal slow-path work queues
         */

        /* Driver internel slow-path CQ Event pool */
        INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
        /* Response IOCB work queue list */
        INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event);
        /* Asynchronous event CQ Event work queue list */
        INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
        /* Slow-path XRI aborted CQ Event work queue list */
        INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
        /* Receive queue CQ Event work queue list */
        INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);

        /* Initialize extent block lists. */
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list);
        INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list);

        /* Initialize mboxq lists. If the early init routines fail
         * these lists need to be correctly initialized.
         */
        INIT_LIST_HEAD(&phba->sli.mboxq);
        INIT_LIST_HEAD(&phba->sli.mboxq_cmpl);

        /* initialize optic_state to 0xFF */
        phba->sli4_hba.lnk_info.optic_state = 0xff;

        /* Allocate device driver memory */
        rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
        if (rc)
                goto out_destroy_workqueue;

        /* IF Type 2 ports get initialized now. */
        if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >=
            LPFC_SLI_INTF_IF_TYPE_2) {
                rc = lpfc_pci_function_reset(phba);
                if (unlikely(rc)) {
                        rc = -ENODEV;
                        goto out_free_mem;
                }
                phba->temp_sensor_support = 1;
        }

        /* Create the bootstrap mailbox command */
        rc = lpfc_create_bootstrap_mbox(phba);
        if (unlikely(rc))
                goto out_free_mem;

        /* Set up the host's endian order with the device. */
        rc = lpfc_setup_endian_order(phba);
        if (unlikely(rc))
                goto out_free_bsmbx;

        /* Set up the hba's configuration parameters. */
        rc = lpfc_sli4_read_config(phba);
        if (unlikely(rc))
                goto out_free_bsmbx;

        if (phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG) {
                /* Right now the link is down, if FA-PWWN is configured the
                 * firmware will try FLOGI before the driver gets a link up.
                 * If it fails, the driver should get a MISCONFIGURED async
                 * event which will clear this flag. The only notification
                 * the driver gets is if it fails, if it succeeds there is no
                 * notification given. Assume success.
                 */
                phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_FABRIC;
        }

        rc = lpfc_mem_alloc_active_rrq_pool_s4(phba);
        if (unlikely(rc))
                goto out_free_bsmbx;

        /* IF Type 0 ports get initialized now. */
        if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
            LPFC_SLI_INTF_IF_TYPE_0) {
                rc = lpfc_pci_function_reset(phba);
                if (unlikely(rc))
                        goto out_free_bsmbx;
        }

        mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
                                                       GFP_KERNEL);
        if (!mboxq) {
                rc = -ENOMEM;
                goto out_free_bsmbx;
        }

        /* Check for NVMET being configured */
        phba->nvmet_support = 0;
        if (lpfc_enable_nvmet_cnt) {

                /* First get WWN of HBA instance */
                lpfc_read_nv(phba, mboxq);
                rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_ERR,
                                        LOG_TRACE_EVENT,
                                        "6016 Mailbox failed , mbxCmd x%x "
                                        "READ_NV, mbxStatus x%x\n",
                                        bf_get(lpfc_mqe_command, &mboxq->u.mqe),
                                        bf_get(lpfc_mqe_status, &mboxq->u.mqe));
                        mempool_free(mboxq, phba->mbox_mem_pool);
                        rc = -EIO;
                        goto out_free_bsmbx;
                }
                mb = &mboxq->u.mb;
                memcpy(&wwn, (char *)mb->un.varRDnvp.nodename,
                       sizeof(uint64_t));
                wwn = cpu_to_be64(wwn);
                phba->sli4_hba.wwnn.u.name = wwn;
                memcpy(&wwn, (char *)mb->un.varRDnvp.portname,
                       sizeof(uint64_t));
                /* wwn is WWPN of HBA instance */
                wwn = cpu_to_be64(wwn);
                phba->sli4_hba.wwpn.u.name = wwn;

                /* Check to see if it matches any module parameter */
                for (i = 0; i < lpfc_enable_nvmet_cnt; i++) {
                        if (wwn == lpfc_enable_nvmet[i]) {
#if (IS_ENABLED(CONFIG_NVME_TARGET_FC))
                                if (lpfc_nvmet_mem_alloc(phba))
                                        break;

                                phba->nvmet_support = 1; /* a match */

                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "6017 NVME Target %016llx\n",
                                                wwn);
#else
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "6021 Can't enable NVME Target."
                                                " NVME_TARGET_FC infrastructure"
                                                " is not in kernel\n");
#endif
                                /* Not supported for NVMET */
                                phba->cfg_xri_rebalancing = 0;
                                if (phba->irq_chann_mode == NHT_MODE) {
                                        phba->cfg_irq_chann =
                                                phba->sli4_hba.num_present_cpu;
                                        phba->cfg_hdw_queue =
                                                phba->sli4_hba.num_present_cpu;
                                        phba->irq_chann_mode = NORMAL_MODE;
                                }
                                break;
                        }
                }
        }

        lpfc_nvme_mod_param_dep(phba);

        /*
         * Get sli4 parameters that override parameters from Port capabilities.
         * If this call fails, it isn't critical unless the SLI4 parameters come
         * back in conflict.
         */
        rc = lpfc_get_sli4_parameters(phba, mboxq);
        if (rc) {
                if_type = bf_get(lpfc_sli_intf_if_type,
                                 &phba->sli4_hba.sli_intf);
                if_fam = bf_get(lpfc_sli_intf_sli_family,
                                &phba->sli4_hba.sli_intf);
                if (phba->sli4_hba.extents_in_use &&
                    phba->sli4_hba.rpi_hdrs_in_use) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2999 Unsupported SLI4 Parameters "
                                        "Extents and RPI headers enabled.\n");
                        if (if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
                            if_fam ==  LPFC_SLI_INTF_FAMILY_BE2) {
                                mempool_free(mboxq, phba->mbox_mem_pool);
                                rc = -EIO;
                                goto out_free_bsmbx;
                        }
                }
                if (!(if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
                      if_fam == LPFC_SLI_INTF_FAMILY_BE2)) {
                        mempool_free(mboxq, phba->mbox_mem_pool);
                        rc = -EIO;
                        goto out_free_bsmbx;
                }
        }

        /*
         * 1 for cmd, 1 for rsp, NVME adds an extra one
         * for boundary conditions in its max_sgl_segment template.
         */
        extra = 2;
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                extra++;

        /*
         * It doesn't matter what family our adapter is in, we are
         * limited to 2 Pages, 512 SGEs, for our SGL.
         * There are going to be 2 reserved SGEs: 1 FCP cmnd + 1 FCP rsp
         */
        max_buf_size = (2 * SLI4_PAGE_SIZE);

        /*
         * Since lpfc_sg_seg_cnt is module param, the sg_dma_buf_size
         * used to create the sg_dma_buf_pool must be calculated.
         */
        if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
                /* Both cfg_enable_bg and cfg_external_dif code paths */

                /*
                 * The scsi_buf for a T10-DIF I/O holds the FCP cmnd,
                 * the FCP rsp, and a SGE. Sice we have no control
                 * over how many protection segments the SCSI Layer
                 * will hand us (ie: there could be one for every block
                 * in the IO), just allocate enough SGEs to accomidate
                 * our max amount and we need to limit lpfc_sg_seg_cnt
                 * to minimize the risk of running out.
                 */
                phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
                                sizeof(struct fcp_rsp) + max_buf_size;

                /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */
                phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT;

                /*
                 * If supporting DIF, reduce the seg count for scsi to
                 * allow room for the DIF sges.
                 */
                if (phba->cfg_enable_bg &&
                    phba->cfg_sg_seg_cnt > LPFC_MAX_BG_SLI4_SEG_CNT_DIF)
                        phba->cfg_scsi_seg_cnt = LPFC_MAX_BG_SLI4_SEG_CNT_DIF;
                else
                        phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt;

        } else {
                /*
                 * The scsi_buf for a regular I/O holds the FCP cmnd,
                 * the FCP rsp, a SGE for each, and a SGE for up to
                 * cfg_sg_seg_cnt data segments.
                 */
                phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
                                sizeof(struct fcp_rsp) +
                                ((phba->cfg_sg_seg_cnt + extra) *
                                sizeof(struct sli4_sge));

                /* Total SGEs for scsi_sg_list */
                phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + extra;
                phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt;

                /*
                 * NOTE: if (phba->cfg_sg_seg_cnt + extra) <= 256 we only
                 * need to post 1 page for the SGL.
                 */
        }

        if (phba->cfg_xpsgl && !phba->nvmet_support)
                phba->cfg_sg_dma_buf_size = LPFC_DEFAULT_XPSGL_SIZE;
        else if (phba->cfg_sg_dma_buf_size  <= LPFC_MIN_SG_SLI4_BUF_SZ)
                phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ;
        else
                phba->cfg_sg_dma_buf_size =
                                SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size);

        phba->border_sge_num = phba->cfg_sg_dma_buf_size /
                               sizeof(struct sli4_sge);

        /* Limit to LPFC_MAX_NVME_SEG_CNT for NVME. */
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) {
                        lpfc_printf_log(phba, KERN_INFO, LOG_NVME | LOG_INIT,
                                        "6300 Reducing NVME sg segment "
                                        "cnt to %d\n",
                                        LPFC_MAX_NVME_SEG_CNT);
                        phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT;
                } else
                        phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP,
                        "9087 sg_seg_cnt:%d dmabuf_size:%d "
                        "total:%d scsi:%d nvme:%d\n",
                        phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size,
                        phba->cfg_total_seg_cnt,  phba->cfg_scsi_seg_cnt,
                        phba->cfg_nvme_seg_cnt);

        if (phba->cfg_sg_dma_buf_size < SLI4_PAGE_SIZE)
                i = phba->cfg_sg_dma_buf_size;
        else
                i = SLI4_PAGE_SIZE;

        phba->lpfc_sg_dma_buf_pool =
                        dma_pool_create("lpfc_sg_dma_buf_pool",
                                        &phba->pcidev->dev,
                                        phba->cfg_sg_dma_buf_size,
                                        i, 0);
        if (!phba->lpfc_sg_dma_buf_pool) {
                rc = -ENOMEM;
                goto out_free_bsmbx;
        }

        phba->lpfc_cmd_rsp_buf_pool =
                        dma_pool_create("lpfc_cmd_rsp_buf_pool",
                                        &phba->pcidev->dev,
                                        sizeof(struct fcp_cmnd) +
                                        sizeof(struct fcp_rsp),
                                        i, 0);
        if (!phba->lpfc_cmd_rsp_buf_pool) {
                rc = -ENOMEM;
                goto out_free_sg_dma_buf;
        }

        mempool_free(mboxq, phba->mbox_mem_pool);

        /* Verify OAS is supported */
        lpfc_sli4_oas_verify(phba);

        /* Verify RAS support on adapter */
        lpfc_sli4_ras_init(phba);

        /* Verify all the SLI4 queues */
        rc = lpfc_sli4_queue_verify(phba);
        if (rc)
                goto out_free_cmd_rsp_buf;

        /* Create driver internal CQE event pool */
        rc = lpfc_sli4_cq_event_pool_create(phba);
        if (rc)
                goto out_free_cmd_rsp_buf;

        /* Initialize sgl lists per host */
        lpfc_init_sgl_list(phba);

        /* Allocate and initialize active sgl array */
        rc = lpfc_init_active_sgl_array(phba);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1430 Failed to initialize sgl list.\n");
                goto out_destroy_cq_event_pool;
        }
        rc = lpfc_sli4_init_rpi_hdrs(phba);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1432 Failed to initialize rpi headers.\n");
                goto out_free_active_sgl;
        }

        /* Allocate eligible FCF bmask memory for FCF roundrobin failover */
        longs = (LPFC_SLI4_FCF_TBL_INDX_MAX + BITS_PER_LONG - 1)/BITS_PER_LONG;
        phba->fcf.fcf_rr_bmask = kcalloc(longs, sizeof(unsigned long),
                                         GFP_KERNEL);
        if (!phba->fcf.fcf_rr_bmask) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2759 Failed allocate memory for FCF round "
                                "robin failover bmask\n");
                rc = -ENOMEM;
                goto out_remove_rpi_hdrs;
        }

        phba->sli4_hba.hba_eq_hdl = kcalloc(phba->cfg_irq_chann,
                                            sizeof(struct lpfc_hba_eq_hdl),
                                            GFP_KERNEL);
        if (!phba->sli4_hba.hba_eq_hdl) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2572 Failed allocate memory for "
                                "fast-path per-EQ handle array\n");
                rc = -ENOMEM;
                goto out_free_fcf_rr_bmask;
        }

        phba->sli4_hba.cpu_map = kcalloc(phba->sli4_hba.num_possible_cpu,
                                        sizeof(struct lpfc_vector_map_info),
                                        GFP_KERNEL);
        if (!phba->sli4_hba.cpu_map) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3327 Failed allocate memory for msi-x "
                                "interrupt vector mapping\n");
                rc = -ENOMEM;
                goto out_free_hba_eq_hdl;
        }

        phba->sli4_hba.eq_info = alloc_percpu(struct lpfc_eq_intr_info);
        if (!phba->sli4_hba.eq_info) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3321 Failed allocation for per_cpu stats\n");
                rc = -ENOMEM;
                goto out_free_hba_cpu_map;
        }

        phba->sli4_hba.idle_stat = kcalloc(phba->sli4_hba.num_possible_cpu,
                                           sizeof(*phba->sli4_hba.idle_stat),
                                           GFP_KERNEL);
        if (!phba->sli4_hba.idle_stat) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3390 Failed allocation for idle_stat\n");
                rc = -ENOMEM;
                goto out_free_hba_eq_info;
        }

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        phba->sli4_hba.c_stat = alloc_percpu(struct lpfc_hdwq_stat);
        if (!phba->sli4_hba.c_stat) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3332 Failed allocating per cpu hdwq stats\n");
                rc = -ENOMEM;
                goto out_free_hba_idle_stat;
        }
#endif

        phba->cmf_stat = alloc_percpu(struct lpfc_cgn_stat);
        if (!phba->cmf_stat) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3331 Failed allocating per cpu cgn stats\n");
                rc = -ENOMEM;
                goto out_free_hba_hdwq_info;
        }

        /*
         * Enable sr-iov virtual functions if supported and configured
         * through the module parameter.
         */
        if (phba->cfg_sriov_nr_virtfn > 0) {
                rc = lpfc_sli_probe_sriov_nr_virtfn(phba,
                                                 phba->cfg_sriov_nr_virtfn);
                if (rc) {
                        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                        "3020 Requested number of SR-IOV "
                                        "virtual functions (%d) is not "
                                        "supported\n",
                                        phba->cfg_sriov_nr_virtfn);
                        phba->cfg_sriov_nr_virtfn = 0;
                }
        }

        return 0;

out_free_hba_hdwq_info:
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        free_percpu(phba->sli4_hba.c_stat);
out_free_hba_idle_stat:
#endif
        kfree(phba->sli4_hba.idle_stat);
out_free_hba_eq_info:
        free_percpu(phba->sli4_hba.eq_info);
out_free_hba_cpu_map:
        kfree(phba->sli4_hba.cpu_map);
out_free_hba_eq_hdl:
        kfree(phba->sli4_hba.hba_eq_hdl);
out_free_fcf_rr_bmask:
        kfree(phba->fcf.fcf_rr_bmask);
out_remove_rpi_hdrs:
        lpfc_sli4_remove_rpi_hdrs(phba);
out_free_active_sgl:
        lpfc_free_active_sgl(phba);
out_destroy_cq_event_pool:
        lpfc_sli4_cq_event_pool_destroy(phba);
out_free_cmd_rsp_buf:
        dma_pool_destroy(phba->lpfc_cmd_rsp_buf_pool);
        phba->lpfc_cmd_rsp_buf_pool = NULL;
out_free_sg_dma_buf:
        dma_pool_destroy(phba->lpfc_sg_dma_buf_pool);
        phba->lpfc_sg_dma_buf_pool = NULL;
out_free_bsmbx:
        lpfc_destroy_bootstrap_mbox(phba);
out_free_mem:
        lpfc_mem_free(phba);
out_destroy_workqueue:
        destroy_workqueue(phba->wq);
        phba->wq = NULL;
        return rc;
}

/**
 * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up
 * specific for supporting the SLI-4 HBA device it attached to.
 **/
static void
lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
{
        struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;

        free_percpu(phba->sli4_hba.eq_info);
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        free_percpu(phba->sli4_hba.c_stat);
#endif
        free_percpu(phba->cmf_stat);
        kfree(phba->sli4_hba.idle_stat);

        /* Free memory allocated for msi-x interrupt vector to CPU mapping */
        kfree(phba->sli4_hba.cpu_map);
        phba->sli4_hba.num_possible_cpu = 0;
        phba->sli4_hba.num_present_cpu = 0;
        phba->sli4_hba.curr_disp_cpu = 0;
        cpumask_clear(&phba->sli4_hba.irq_aff_mask);

        /* Free memory allocated for fast-path work queue handles */
        kfree(phba->sli4_hba.hba_eq_hdl);

        /* Free the allocated rpi headers. */
        lpfc_sli4_remove_rpi_hdrs(phba);
        lpfc_sli4_remove_rpis(phba);

        /* Free eligible FCF index bmask */
        kfree(phba->fcf.fcf_rr_bmask);

        /* Free the ELS sgl list */
        lpfc_free_active_sgl(phba);
        lpfc_free_els_sgl_list(phba);
        lpfc_free_nvmet_sgl_list(phba);

        /* Free the completion queue EQ event pool */
        lpfc_sli4_cq_event_release_all(phba);
        lpfc_sli4_cq_event_pool_destroy(phba);

        /* Release resource identifiers. */
        lpfc_sli4_dealloc_resource_identifiers(phba);

        /* Free the bsmbx region. */
        lpfc_destroy_bootstrap_mbox(phba);

        /* Free the SLI Layer memory with SLI4 HBAs */
        lpfc_mem_free_all(phba);

        /* Free the current connect table */
        list_for_each_entry_safe(conn_entry, next_conn_entry,
                &phba->fcf_conn_rec_list, list) {
                list_del_init(&conn_entry->list);
                kfree(conn_entry);
        }

        return;
}

/**
 * lpfc_init_api_table_setup - Set up init api function jump table
 * @phba: The hba struct for which this call is being executed.
 * @dev_grp: The HBA PCI-Device group number.
 *
 * This routine sets up the device INIT interface API function jump table
 * in @phba struct.
 *
 * Returns: 0 - success, -ENODEV - failure.
 **/
int
lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
{
        phba->lpfc_hba_init_link = lpfc_hba_init_link;
        phba->lpfc_hba_down_link = lpfc_hba_down_link;
        phba->lpfc_selective_reset = lpfc_selective_reset;
        switch (dev_grp) {
        case LPFC_PCI_DEV_LP:
                phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
                phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
                phba->lpfc_stop_port = lpfc_stop_port_s3;
                break;
        case LPFC_PCI_DEV_OC:
                phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
                phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
                phba->lpfc_stop_port = lpfc_stop_port_s4;
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1431 Invalid HBA PCI-device group: 0x%x\n",
                                dev_grp);
                return -ENODEV;
        }
        return 0;
}

/**
 * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the driver internal resources after the
 * device specific resource setup to support the HBA device it attached to.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
{
        int error;

        /* Startup the kernel thread for this host adapter. */
        phba->worker_thread = kthread_run(lpfc_do_work, phba,
                                          "lpfc_worker_%d", phba->brd_no);
        if (IS_ERR(phba->worker_thread)) {
                error = PTR_ERR(phba->worker_thread);
                return error;
        }

        return 0;
}

/**
 * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the driver internal resources set up after
 * the device specific resource setup for supporting the HBA device it
 * attached to.
 **/
static void
lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
{
        if (phba->wq) {
                destroy_workqueue(phba->wq);
                phba->wq = NULL;
        }

        /* Stop kernel worker thread */
        if (phba->worker_thread)
                kthread_stop(phba->worker_thread);
}

/**
 * lpfc_free_iocb_list - Free iocb list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver's IOCB list and memory.
 **/
void
lpfc_free_iocb_list(struct lpfc_hba *phba)
{
        struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;

        spin_lock_irq(&phba->hbalock);
        list_for_each_entry_safe(iocbq_entry, iocbq_next,
                                 &phba->lpfc_iocb_list, list) {
                list_del(&iocbq_entry->list);
                kfree(iocbq_entry);
                phba->total_iocbq_bufs--;
        }
        spin_unlock_irq(&phba->hbalock);

        return;
}

/**
 * lpfc_init_iocb_list - Allocate and initialize iocb list.
 * @phba: pointer to lpfc hba data structure.
 * @iocb_count: number of requested iocbs
 *
 * This routine is invoked to allocate and initizlize the driver's IOCB
 * list and set up the IOCB tag array accordingly.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
int
lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
{
        struct lpfc_iocbq *iocbq_entry = NULL;
        uint16_t iotag;
        int i;

        /* Initialize and populate the iocb list per host.  */
        INIT_LIST_HEAD(&phba->lpfc_iocb_list);
        for (i = 0; i < iocb_count; i++) {
                iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
                if (iocbq_entry == NULL) {
                        printk(KERN_ERR "%s: only allocated %d iocbs of "
                                "expected %d count. Unloading driver.\n",
                                __func__, i, iocb_count);
                        goto out_free_iocbq;
                }

                iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
                if (iotag == 0) {
                        kfree(iocbq_entry);
                        printk(KERN_ERR "%s: failed to allocate IOTAG. "
                                "Unloading driver.\n", __func__);
                        goto out_free_iocbq;
                }
                iocbq_entry->sli4_lxritag = NO_XRI;
                iocbq_entry->sli4_xritag = NO_XRI;

                spin_lock_irq(&phba->hbalock);
                list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
                phba->total_iocbq_bufs++;
                spin_unlock_irq(&phba->hbalock);
        }

        return 0;

out_free_iocbq:
        lpfc_free_iocb_list(phba);

        return -ENOMEM;
}

/**
 * lpfc_free_sgl_list - Free a given sgl list.
 * @phba: pointer to lpfc hba data structure.
 * @sglq_list: pointer to the head of sgl list.
 *
 * This routine is invoked to free a give sgl list and memory.
 **/
void
lpfc_free_sgl_list(struct lpfc_hba *phba, struct list_head *sglq_list)
{
        struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;

        list_for_each_entry_safe(sglq_entry, sglq_next, sglq_list, list) {
                list_del(&sglq_entry->list);
                lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
                kfree(sglq_entry);
        }
}

/**
 * lpfc_free_els_sgl_list - Free els sgl list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver's els sgl list and memory.
 **/
static void
lpfc_free_els_sgl_list(struct lpfc_hba *phba)
{
        LIST_HEAD(sglq_list);

        /* Retrieve all els sgls from driver list */
        spin_lock_irq(&phba->sli4_hba.sgl_list_lock);
        list_splice_init(&phba->sli4_hba.lpfc_els_sgl_list, &sglq_list);
        spin_unlock_irq(&phba->sli4_hba.sgl_list_lock);

        /* Now free the sgl list */
        lpfc_free_sgl_list(phba, &sglq_list);
}

/**
 * lpfc_free_nvmet_sgl_list - Free nvmet sgl list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver's nvmet sgl list and memory.
 **/
static void
lpfc_free_nvmet_sgl_list(struct lpfc_hba *phba)
{
        struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
        LIST_HEAD(sglq_list);

        /* Retrieve all nvmet sgls from driver list */
        spin_lock_irq(&phba->hbalock);
        spin_lock(&phba->sli4_hba.sgl_list_lock);
        list_splice_init(&phba->sli4_hba.lpfc_nvmet_sgl_list, &sglq_list);
        spin_unlock(&phba->sli4_hba.sgl_list_lock);
        spin_unlock_irq(&phba->hbalock);

        /* Now free the sgl list */
        list_for_each_entry_safe(sglq_entry, sglq_next, &sglq_list, list) {
                list_del(&sglq_entry->list);
                lpfc_nvmet_buf_free(phba, sglq_entry->virt, sglq_entry->phys);
                kfree(sglq_entry);
        }

        /* Update the nvmet_xri_cnt to reflect no current sgls.
         * The next initialization cycle sets the count and allocates
         * the sgls over again.
         */
        phba->sli4_hba.nvmet_xri_cnt = 0;
}

/**
 * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate the driver's active sgl memory.
 * This array will hold the sglq_entry's for active IOs.
 **/
static int
lpfc_init_active_sgl_array(struct lpfc_hba *phba)
{
        int size;
        size = sizeof(struct lpfc_sglq *);
        size *= phba->sli4_hba.max_cfg_param.max_xri;

        phba->sli4_hba.lpfc_sglq_active_list =
                kzalloc(size, GFP_KERNEL);
        if (!phba->sli4_hba.lpfc_sglq_active_list)
                return -ENOMEM;
        return 0;
}

/**
 * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to walk through the array of active sglq entries
 * and free all of the resources.
 * This is just a place holder for now.
 **/
static void
lpfc_free_active_sgl(struct lpfc_hba *phba)
{
        kfree(phba->sli4_hba.lpfc_sglq_active_list);
}

/**
 * lpfc_init_sgl_list - Allocate and initialize sgl list.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate and initizlize the driver's sgl
 * list and set up the sgl xritag tag array accordingly.
 *
 **/
static void
lpfc_init_sgl_list(struct lpfc_hba *phba)
{
        /* Initialize and populate the sglq list per host/VF. */
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_els_sgl_list);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_nvmet_sgl_list);
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);

        /* els xri-sgl book keeping */
        phba->sli4_hba.els_xri_cnt = 0;

        /* nvme xri-buffer book keeping */
        phba->sli4_hba.io_xri_cnt = 0;
}

/**
 * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to post rpi header templates to the
 * port for those SLI4 ports that do not support extents.  This routine
 * posts a PAGE_SIZE memory region to the port to hold up to
 * PAGE_SIZE modulo 64 rpi context headers.  This is an initialization routine
 * and should be called only when interrupts are disabled.
 *
 * Return codes
 *      0 - successful
 *      -ERROR - otherwise.
 **/
int
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
{
        int rc = 0;
        struct lpfc_rpi_hdr *rpi_hdr;

        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
        if (!phba->sli4_hba.rpi_hdrs_in_use)
                return rc;
        if (phba->sli4_hba.extents_in_use)
                return -EIO;

        rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
        if (!rpi_hdr) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0391 Error during rpi post operation\n");
                lpfc_sli4_remove_rpis(phba);
                rc = -ENODEV;
        }

        return rc;
}

/**
 * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate a single 4KB memory region to
 * support rpis and stores them in the phba.  This single region
 * provides support for up to 64 rpis.  The region is used globally
 * by the device.
 *
 * Returns:
 *   A valid rpi hdr on success.
 *   A NULL pointer on any failure.
 **/
struct lpfc_rpi_hdr *
lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
{
        uint16_t rpi_limit, curr_rpi_range;
        struct lpfc_dmabuf *dmabuf;
        struct lpfc_rpi_hdr *rpi_hdr;

        /*
         * If the SLI4 port supports extents, posting the rpi header isn't
         * required.  Set the expected maximum count and let the actual value
         * get set when extents are fully allocated.
         */
        if (!phba->sli4_hba.rpi_hdrs_in_use)
                return NULL;
        if (phba->sli4_hba.extents_in_use)
                return NULL;

        /* The limit on the logical index is just the max_rpi count. */
        rpi_limit = phba->sli4_hba.max_cfg_param.max_rpi;

        spin_lock_irq(&phba->hbalock);
        /*
         * Establish the starting RPI in this header block.  The starting
         * rpi is normalized to a zero base because the physical rpi is
         * port based.
         */
        curr_rpi_range = phba->sli4_hba.next_rpi;
        spin_unlock_irq(&phba->hbalock);

        /* Reached full RPI range */
        if (curr_rpi_range == rpi_limit)
                return NULL;

        /*
         * First allocate the protocol header region for the port.  The
         * port expects a 4KB DMA-mapped memory region that is 4K aligned.
         */
        dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
        if (!dmabuf)
                return NULL;

        dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
                                          LPFC_HDR_TEMPLATE_SIZE,
                                          &dmabuf->phys, GFP_KERNEL);
        if (!dmabuf->virt) {
                rpi_hdr = NULL;
                goto err_free_dmabuf;
        }

        if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
                rpi_hdr = NULL;
                goto err_free_coherent;
        }

        /* Save the rpi header data for cleanup later. */
        rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
        if (!rpi_hdr)
                goto err_free_coherent;

        rpi_hdr->dmabuf = dmabuf;
        rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
        rpi_hdr->page_count = 1;
        spin_lock_irq(&phba->hbalock);

        /* The rpi_hdr stores the logical index only. */
        rpi_hdr->start_rpi = curr_rpi_range;
        rpi_hdr->next_rpi = phba->sli4_hba.next_rpi + LPFC_RPI_HDR_COUNT;
        list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);

        spin_unlock_irq(&phba->hbalock);
        return rpi_hdr;

 err_free_coherent:
        dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
                          dmabuf->virt, dmabuf->phys);
 err_free_dmabuf:
        kfree(dmabuf);
        return NULL;
}

/**
 * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to remove all memory resources allocated
 * to support rpis for SLI4 ports not supporting extents. This routine
 * presumes the caller has released all rpis consumed by fabric or port
 * logins and is prepared to have the header pages removed.
 **/
void
lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
{
        struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;

        if (!phba->sli4_hba.rpi_hdrs_in_use)
                goto exit;

        list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
                                 &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
                list_del(&rpi_hdr->list);
                dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
                                  rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
                kfree(rpi_hdr->dmabuf);
                kfree(rpi_hdr);
        }
 exit:
        /* There are no rpis available to the port now. */
        phba->sli4_hba.next_rpi = 0;
}

/**
 * lpfc_hba_alloc - Allocate driver hba data structure for a device.
 * @pdev: pointer to pci device data structure.
 *
 * This routine is invoked to allocate the driver hba data structure for an
 * HBA device. If the allocation is successful, the phba reference to the
 * PCI device data structure is set.
 *
 * Return codes
 *      pointer to @phba - successful
 *      NULL - error
 **/
static struct lpfc_hba *
lpfc_hba_alloc(struct pci_dev *pdev)
{
        struct lpfc_hba *phba;

        /* Allocate memory for HBA structure */
        phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
        if (!phba) {
                dev_err(&pdev->dev, "failed to allocate hba struct\n");
                return NULL;
        }

        /* Set reference to PCI device in HBA structure */
        phba->pcidev = pdev;

        /* Assign an unused board number */
        phba->brd_no = lpfc_get_instance();
        if (phba->brd_no < 0) {
                kfree(phba);
                return NULL;
        }
        phba->eratt_poll_interval = LPFC_ERATT_POLL_INTERVAL;

        spin_lock_init(&phba->ct_ev_lock);
        INIT_LIST_HEAD(&phba->ct_ev_waiters);

        return phba;
}

/**
 * lpfc_hba_free - Free driver hba data structure with a device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the driver hba data structure with an
 * HBA device.
 **/
static void
lpfc_hba_free(struct lpfc_hba *phba)
{
        if (phba->sli_rev == LPFC_SLI_REV4)
                kfree(phba->sli4_hba.hdwq);

        /* Release the driver assigned board number */
        idr_remove(&lpfc_hba_index, phba->brd_no);

        /* Free memory allocated with sli3 rings */
        kfree(phba->sli.sli3_ring);
        phba->sli.sli3_ring = NULL;

        kfree(phba);
        return;
}

/**
 * lpfc_setup_fdmi_mask - Setup initial FDMI mask for HBA and Port attributes
 * @vport: pointer to lpfc vport data structure.
 *
 * This routine is will setup initial FDMI attribute masks for
 * FDMI2 or SmartSAN depending on module parameters. The driver will attempt
 * to get these attributes first before falling back, the attribute
 * fallback hierarchy is SmartSAN -> FDMI2 -> FMDI1
 **/
void
lpfc_setup_fdmi_mask(struct lpfc_vport *vport)
{
        struct lpfc_hba *phba = vport->phba;

        set_bit(FC_ALLOW_FDMI, &vport->load_flag);
        if (phba->cfg_enable_SmartSAN ||
            phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT) {
                /* Setup appropriate attribute masks */
                vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR;
                if (phba->cfg_enable_SmartSAN)
                        vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR;
                else
                        vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY,
                        "6077 Setup FDMI mask: hba x%x port x%x\n",
                        vport->fdmi_hba_mask, vport->fdmi_port_mask);
}

/**
 * lpfc_create_shost - Create hba physical port with associated scsi host.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to create HBA physical port and associate a SCSI
 * host with it.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_create_shost(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport;
        struct Scsi_Host  *shost;

        /* Initialize HBA FC structure */
        phba->fc_edtov = FF_DEF_EDTOV;
        phba->fc_ratov = FF_DEF_RATOV;
        phba->fc_altov = FF_DEF_ALTOV;
        phba->fc_arbtov = FF_DEF_ARBTOV;

        atomic_set(&phba->sdev_cnt, 0);
        vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
        if (!vport)
                return -ENODEV;

        shost = lpfc_shost_from_vport(vport);
        phba->pport = vport;

        if (phba->nvmet_support) {
                /* Only 1 vport (pport) will support NVME target */
                phba->targetport = NULL;
                phba->cfg_enable_fc4_type = LPFC_ENABLE_NVME;
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME_DISC,
                                "6076 NVME Target Found\n");
        }

        lpfc_debugfs_initialize(vport);
        /* Put reference to SCSI host to driver's device private data */
        pci_set_drvdata(phba->pcidev, shost);

        lpfc_setup_fdmi_mask(vport);

        /*
         * At this point we are fully registered with PSA. In addition,
         * any initial discovery should be completed.
         */
        return 0;
}

/**
 * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to destroy HBA physical port and the associated
 * SCSI host.
 **/
static void
lpfc_destroy_shost(struct lpfc_hba *phba)
{
        struct lpfc_vport *vport = phba->pport;

        /* Destroy physical port that associated with the SCSI host */
        destroy_port(vport);

        return;
}

/**
 * lpfc_setup_bg - Setup Block guard structures and debug areas.
 * @phba: pointer to lpfc hba data structure.
 * @shost: the shost to be used to detect Block guard settings.
 *
 * This routine sets up the local Block guard protocol settings for @shost.
 * This routine also allocates memory for debugging bg buffers.
 **/
static void
lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
{
        uint32_t old_mask;
        uint32_t old_guard;

        if (phba->cfg_prot_mask && phba->cfg_prot_guard) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "1478 Registering BlockGuard with the "
                                "SCSI layer\n");

                old_mask = phba->cfg_prot_mask;
                old_guard = phba->cfg_prot_guard;

                /* Only allow supported values */
                phba->cfg_prot_mask &= (SHOST_DIF_TYPE1_PROTECTION |
                        SHOST_DIX_TYPE0_PROTECTION |
                        SHOST_DIX_TYPE1_PROTECTION);
                phba->cfg_prot_guard &= (SHOST_DIX_GUARD_IP |
                                         SHOST_DIX_GUARD_CRC);

                /* DIF Type 1 protection for profiles AST1/C1 is end to end */
                if (phba->cfg_prot_mask == SHOST_DIX_TYPE1_PROTECTION)
                        phba->cfg_prot_mask |= SHOST_DIF_TYPE1_PROTECTION;

                if (phba->cfg_prot_mask && phba->cfg_prot_guard) {
                        if ((old_mask != phba->cfg_prot_mask) ||
                                (old_guard != phba->cfg_prot_guard))
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "1475 Registering BlockGuard with the "
                                        "SCSI layer: mask %d  guard %d\n",
                                        phba->cfg_prot_mask,
                                        phba->cfg_prot_guard);

                        scsi_host_set_prot(shost, phba->cfg_prot_mask);
                        scsi_host_set_guard(shost, phba->cfg_prot_guard);
                } else
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1479 Not Registering BlockGuard with the SCSI "
                                "layer, Bad protection parameters: %d %d\n",
                                old_mask, old_guard);
        }
}

/**
 * lpfc_post_init_setup - Perform necessary device post initialization setup.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to perform all the necessary post initialization
 * setup for the device.
 **/
static void
lpfc_post_init_setup(struct lpfc_hba *phba)
{
        struct Scsi_Host  *shost;
        struct lpfc_adapter_event_header adapter_event;

        /* Get the default values for Model Name and Description */
        lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

        /*
         * hba setup may have changed the hba_queue_depth so we need to
         * adjust the value of can_queue.
         */
        shost = pci_get_drvdata(phba->pcidev);
        shost->can_queue = phba->cfg_hba_queue_depth - 10;

        lpfc_host_attrib_init(shost);

        if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
                spin_lock_irq(shost->host_lock);
                lpfc_poll_start_timer(phba);
                spin_unlock_irq(shost->host_lock);
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "0428 Perform SCSI scan\n");
        /* Send board arrival event to upper layer */
        adapter_event.event_type = FC_REG_ADAPTER_EVENT;
        adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
        fc_host_post_vendor_event(shost, fc_get_event_number(),
                                  sizeof(adapter_event),
                                  (char *) &adapter_event,
                                  LPFC_NL_VENDOR_ID);
        return;
}

/**
 * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the PCI device memory space for device
 * with SLI-3 interface spec.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
{
        struct pci_dev *pdev = phba->pcidev;
        unsigned long bar0map_len, bar2map_len;
        int i, hbq_count;
        void *ptr;
        int error;

        if (!pdev)
                return -ENODEV;

        /* Set the device DMA mask size */
        error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
        if (error)
                error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
        if (error)
                return error;
        error = -ENODEV;

        /* Get the bus address of Bar0 and Bar2 and the number of bytes
         * required by each mapping.
         */
        phba->pci_bar0_map = pci_resource_start(pdev, 0);
        bar0map_len = pci_resource_len(pdev, 0);

        phba->pci_bar2_map = pci_resource_start(pdev, 2);
        bar2map_len = pci_resource_len(pdev, 2);

        /* Map HBA SLIM to a kernel virtual address. */
        phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
        if (!phba->slim_memmap_p) {
                dev_printk(KERN_ERR, &pdev->dev,
                           "ioremap failed for SLIM memory.\n");
                goto out;
        }

        /* Map HBA Control Registers to a kernel virtual address. */
        phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
        if (!phba->ctrl_regs_memmap_p) {
                dev_printk(KERN_ERR, &pdev->dev,
                           "ioremap failed for HBA control registers.\n");
                goto out_iounmap_slim;
        }

        /* Allocate memory for SLI-2 structures */
        phba->slim2p.virt = dma_alloc_coherent(&pdev->dev, SLI2_SLIM_SIZE,
                                               &phba->slim2p.phys, GFP_KERNEL);
        if (!phba->slim2p.virt)
                goto out_iounmap;

        phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
        phba->mbox_ext = (phba->slim2p.virt +
                offsetof(struct lpfc_sli2_slim, mbx_ext_words));
        phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
        phba->IOCBs = (phba->slim2p.virt +
                       offsetof(struct lpfc_sli2_slim, IOCBs));

        phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
                                                 lpfc_sli_hbq_size(),
                                                 &phba->hbqslimp.phys,
                                                 GFP_KERNEL);
        if (!phba->hbqslimp.virt)
                goto out_free_slim;

        hbq_count = lpfc_sli_hbq_count();
        ptr = phba->hbqslimp.virt;
        for (i = 0; i < hbq_count; ++i) {
                phba->hbqs[i].hbq_virt = ptr;
                INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
                ptr += (lpfc_hbq_defs[i]->entry_count *
                        sizeof(struct lpfc_hbq_entry));
        }
        phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
        phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;

        memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());

        phba->MBslimaddr = phba->slim_memmap_p;
        phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
        phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
        phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
        phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;

        return 0;

out_free_slim:
        dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
                          phba->slim2p.virt, phba->slim2p.phys);
out_iounmap:
        iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
        iounmap(phba->slim_memmap_p);
out:
        return error;
}

/**
 * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the PCI device memory space for device
 * with SLI-3 interface spec.
 **/
static void
lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
{
        struct pci_dev *pdev;

        /* Obtain PCI device reference */
        if (!phba->pcidev)
                return;
        else
                pdev = phba->pcidev;

        /* Free coherent DMA memory allocated */
        dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
                          phba->hbqslimp.virt, phba->hbqslimp.phys);
        dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
                          phba->slim2p.virt, phba->slim2p.phys);

        /* I/O memory unmap */
        iounmap(phba->ctrl_regs_memmap_p);
        iounmap(phba->slim_memmap_p);

        return;
}

/**
 * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
 * done and check status.
 *
 * Return 0 if successful, otherwise -ENODEV.
 **/
int
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
        struct lpfc_register portsmphr_reg, uerrlo_reg, uerrhi_reg;
        struct lpfc_register reg_data;
        int i, port_error = 0;
        uint32_t if_type;

        memset(&portsmphr_reg, 0, sizeof(portsmphr_reg));
        memset(&reg_data, 0, sizeof(reg_data));
        if (!phba->sli4_hba.PSMPHRregaddr)
                return -ENODEV;

        /* Wait up to 30 seconds for the SLI Port POST done and ready */
        for (i = 0; i < 3000; i++) {
                if (lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
                        &portsmphr_reg.word0) ||
                        (bf_get(lpfc_port_smphr_perr, &portsmphr_reg))) {
                        /* Port has a fatal POST error, break out */
                        port_error = -ENODEV;
                        break;
                }
                if (LPFC_POST_STAGE_PORT_READY ==
                    bf_get(lpfc_port_smphr_port_status, &portsmphr_reg))
                        break;
                msleep(10);
        }

        /*
         * If there was a port error during POST, then don't proceed with
         * other register reads as the data may not be valid.  Just exit.
         */
        if (port_error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "1408 Port Failed POST - portsmphr=0x%x, "
                        "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, "
                        "scr2=x%x, hscratch=x%x, pstatus=x%x\n",
                        portsmphr_reg.word0,
                        bf_get(lpfc_port_smphr_perr, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_sfi, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_nip, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_ipc, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_scr1, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_scr2, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_host_scratch, &portsmphr_reg),
                        bf_get(lpfc_port_smphr_port_status, &portsmphr_reg));
        } else {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "2534 Device Info: SLIFamily=0x%x, "
                                "SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, "
                                "SLIHint_2=0x%x, FT=0x%x\n",
                                bf_get(lpfc_sli_intf_sli_family,
                                       &phba->sli4_hba.sli_intf),
                                bf_get(lpfc_sli_intf_slirev,
                                       &phba->sli4_hba.sli_intf),
                                bf_get(lpfc_sli_intf_if_type,
                                       &phba->sli4_hba.sli_intf),
                                bf_get(lpfc_sli_intf_sli_hint1,
                                       &phba->sli4_hba.sli_intf),
                                bf_get(lpfc_sli_intf_sli_hint2,
                                       &phba->sli4_hba.sli_intf),
                                bf_get(lpfc_sli_intf_func_type,
                                       &phba->sli4_hba.sli_intf));
                /*
                 * Check for other Port errors during the initialization
                 * process.  Fail the load if the port did not come up
                 * correctly.
                 */
                if_type = bf_get(lpfc_sli_intf_if_type,
                                 &phba->sli4_hba.sli_intf);
                switch (if_type) {
                case LPFC_SLI_INTF_IF_TYPE_0:
                        phba->sli4_hba.ue_mask_lo =
                              readl(phba->sli4_hba.u.if_type0.UEMASKLOregaddr);
                        phba->sli4_hba.ue_mask_hi =
                              readl(phba->sli4_hba.u.if_type0.UEMASKHIregaddr);
                        uerrlo_reg.word0 =
                              readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
                        uerrhi_reg.word0 =
                                readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
                        if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
                            (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "1422 Unrecoverable Error "
                                                "Detected during POST "
                                                "uerr_lo_reg=0x%x, "
                                                "uerr_hi_reg=0x%x, "
                                                "ue_mask_lo_reg=0x%x, "
                                                "ue_mask_hi_reg=0x%x\n",
                                                uerrlo_reg.word0,
                                                uerrhi_reg.word0,
                                                phba->sli4_hba.ue_mask_lo,
                                                phba->sli4_hba.ue_mask_hi);
                                port_error = -ENODEV;
                        }
                        break;
                case LPFC_SLI_INTF_IF_TYPE_2:
                case LPFC_SLI_INTF_IF_TYPE_6:
                        /* Final checks.  The port status should be clean. */
                        if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
                                &reg_data.word0) ||
                                lpfc_sli4_unrecoverable_port(&reg_data)) {
                                phba->work_status[0] =
                                        readl(phba->sli4_hba.u.if_type2.
                                              ERR1regaddr);
                                phba->work_status[1] =
                                        readl(phba->sli4_hba.u.if_type2.
                                              ERR2regaddr);
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2888 Unrecoverable port error "
                                        "following POST: port status reg "
                                        "0x%x, port_smphr reg 0x%x, "
                                        "error 1=0x%x, error 2=0x%x\n",
                                        reg_data.word0,
                                        portsmphr_reg.word0,
                                        phba->work_status[0],
                                        phba->work_status[1]);
                                port_error = -ENODEV;
                                break;
                        }

                        if (lpfc_pldv_detect &&
                            bf_get(lpfc_sli_intf_sli_family,
                                   &phba->sli4_hba.sli_intf) ==
                                        LPFC_SLI_INTF_FAMILY_G6)
                                pci_write_config_byte(phba->pcidev,
                                                      LPFC_SLI_INTF, CFG_PLD);
                        break;
                case LPFC_SLI_INTF_IF_TYPE_1:
                default:
                        break;
                }
        }
        return port_error;
}

/**
 * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
 * @phba: pointer to lpfc hba data structure.
 * @if_type:  The SLI4 interface type getting configured.
 *
 * This routine is invoked to set up SLI4 BAR0 PCI config space register
 * memory map.
 **/
static void
lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
{
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                phba->sli4_hba.u.if_type0.UERRLOregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_LO;
                phba->sli4_hba.u.if_type0.UERRHIregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_HI;
                phba->sli4_hba.u.if_type0.UEMASKLOregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_LO;
                phba->sli4_hba.u.if_type0.UEMASKHIregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_HI;
                phba->sli4_hba.SLIINTFregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
                break;
        case LPFC_SLI_INTF_IF_TYPE_2:
                phba->sli4_hba.u.if_type2.EQDregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_EQ_DELAY_OFFSET;
                phba->sli4_hba.u.if_type2.ERR1regaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_ER1_OFFSET;
                phba->sli4_hba.u.if_type2.ERR2regaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_ER2_OFFSET;
                phba->sli4_hba.u.if_type2.CTRLregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_CTL_OFFSET;
                phba->sli4_hba.u.if_type2.STATUSregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_STA_OFFSET;
                phba->sli4_hba.SLIINTFregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
                phba->sli4_hba.PSMPHRregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_SEM_OFFSET;
                phba->sli4_hba.RQDBregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_ULP0_RQ_DOORBELL;
                phba->sli4_hba.WQDBregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_ULP0_WQ_DOORBELL;
                phba->sli4_hba.CQDBregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
                phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
                phba->sli4_hba.MQDBregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
                phba->sli4_hba.BMBXregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
                break;
        case LPFC_SLI_INTF_IF_TYPE_6:
                phba->sli4_hba.u.if_type2.EQDregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_EQ_DELAY_OFFSET;
                phba->sli4_hba.u.if_type2.ERR1regaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_ER1_OFFSET;
                phba->sli4_hba.u.if_type2.ERR2regaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_ER2_OFFSET;
                phba->sli4_hba.u.if_type2.CTRLregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_CTL_OFFSET;
                phba->sli4_hba.u.if_type2.STATUSregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_STA_OFFSET;
                phba->sli4_hba.PSMPHRregaddr =
                        phba->sli4_hba.conf_regs_memmap_p +
                                                LPFC_CTL_PORT_SEM_OFFSET;
                phba->sli4_hba.BMBXregaddr =
                        phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
                break;
        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                dev_printk(KERN_ERR, &phba->pcidev->dev,
                           "FATAL - unsupported SLI4 interface type - %d\n",
                           if_type);
                break;
        }
}

/**
 * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
 * @phba: pointer to lpfc hba data structure.
 * @if_type: sli if type to operate on.
 *
 * This routine is invoked to set up SLI4 BAR1 register memory map.
 **/
static void
lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
{
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                phba->sli4_hba.PSMPHRregaddr =
                        phba->sli4_hba.ctrl_regs_memmap_p +
                        LPFC_SLIPORT_IF0_SMPHR;
                phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
                        LPFC_HST_ISR0;
                phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
                        LPFC_HST_IMR0;
                phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
                        LPFC_HST_ISCR0;
                break;
        case LPFC_SLI_INTF_IF_TYPE_6:
                phba->sli4_hba.RQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
                        LPFC_IF6_RQ_DOORBELL;
                phba->sli4_hba.WQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
                        LPFC_IF6_WQ_DOORBELL;
                phba->sli4_hba.CQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
                        LPFC_IF6_CQ_DOORBELL;
                phba->sli4_hba.EQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
                        LPFC_IF6_EQ_DOORBELL;
                phba->sli4_hba.MQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p +
                        LPFC_IF6_MQ_DOORBELL;
                break;
        case LPFC_SLI_INTF_IF_TYPE_2:
        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                dev_err(&phba->pcidev->dev,
                           "FATAL - unsupported SLI4 interface type - %d\n",
                           if_type);
                break;
        }
}

/**
 * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
 * @phba: pointer to lpfc hba data structure.
 * @vf: virtual function number
 *
 * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
 * based on the given viftual function number, @vf.
 *
 * Return 0 if successful, otherwise -ENODEV.
 **/
static int
lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
{
        if (vf > LPFC_VIR_FUNC_MAX)
                return -ENODEV;

        phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
                                vf * LPFC_VFR_PAGE_SIZE +
                                        LPFC_ULP0_RQ_DOORBELL);
        phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
                                vf * LPFC_VFR_PAGE_SIZE +
                                        LPFC_ULP0_WQ_DOORBELL);
        phba->sli4_hba.CQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
                                vf * LPFC_VFR_PAGE_SIZE +
                                        LPFC_EQCQ_DOORBELL);
        phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr;
        phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
                                vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
        phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
                                vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
        return 0;
}

/**
 * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to create the bootstrap mailbox
 * region consistent with the SLI-4 interface spec.  This
 * routine allocates all memory necessary to communicate
 * mailbox commands to the port and sets up all alignment
 * needs.  No locks are expected to be held when calling
 * this routine.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - could not allocated memory.
 **/
static int
lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
{
        uint32_t bmbx_size;
        struct lpfc_dmabuf *dmabuf;
        struct dma_address *dma_address;
        uint32_t pa_addr;
        uint64_t phys_addr;

        dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
        if (!dmabuf)
                return -ENOMEM;

        /*
         * The bootstrap mailbox region is comprised of 2 parts
         * plus an alignment restriction of 16 bytes.
         */
        bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
        dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, bmbx_size,
                                          &dmabuf->phys, GFP_KERNEL);
        if (!dmabuf->virt) {
                kfree(dmabuf);
                return -ENOMEM;
        }

        /*
         * Initialize the bootstrap mailbox pointers now so that the register
         * operations are simple later.  The mailbox dma address is required
         * to be 16-byte aligned.  Also align the virtual memory as each
         * maibox is copied into the bmbx mailbox region before issuing the
         * command to the port.
         */
        phba->sli4_hba.bmbx.dmabuf = dmabuf;
        phba->sli4_hba.bmbx.bmbx_size = bmbx_size;

        phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
                                              LPFC_ALIGN_16_BYTE);
        phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
                                              LPFC_ALIGN_16_BYTE);

        /*
         * Set the high and low physical addresses now.  The SLI4 alignment
         * requirement is 16 bytes and the mailbox is posted to the port
         * as two 30-bit addresses.  The other data is a bit marking whether
         * the 30-bit address is the high or low address.
         * Upcast bmbx aphys to 64bits so shift instruction compiles
         * clean on 32 bit machines.
         */
        dma_address = &phba->sli4_hba.bmbx.dma_address;
        phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
        pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
        dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
                                           LPFC_BMBX_BIT1_ADDR_HI);

        pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
        dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
                                           LPFC_BMBX_BIT1_ADDR_LO);
        return 0;
}

/**
 * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to teardown the bootstrap mailbox
 * region and release all host resources. This routine requires
 * the caller to ensure all mailbox commands recovered, no
 * additional mailbox comands are sent, and interrupts are disabled
 * before calling this routine.
 *
 **/
static void
lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
{
        dma_free_coherent(&phba->pcidev->dev,
                          phba->sli4_hba.bmbx.bmbx_size,
                          phba->sli4_hba.bmbx.dmabuf->virt,
                          phba->sli4_hba.bmbx.dmabuf->phys);

        kfree(phba->sli4_hba.bmbx.dmabuf);
        memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
}

static const char * const lpfc_topo_to_str[] = {
        "Loop then P2P",
        "Loopback",
        "P2P Only",
        "Unsupported",
        "Loop Only",
        "Unsupported",
        "P2P then Loop",
};

#define LINK_FLAGS_DEF  0x0
#define LINK_FLAGS_P2P  0x1
#define LINK_FLAGS_LOOP 0x2
/**
 * lpfc_map_topology - Map the topology read from READ_CONFIG
 * @phba: pointer to lpfc hba data structure.
 * @rd_config: pointer to read config data
 *
 * This routine is invoked to map the topology values as read
 * from the read config mailbox command. If the persistent
 * topology feature is supported, the firmware will provide the
 * saved topology information to be used in INIT_LINK
 **/
static void
lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
{
        u8 ptv, tf, pt;

        ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config);
        tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config);
        pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config);

        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                        "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x",
                         ptv, tf, pt);
        if (!ptv) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
                                "2019 FW does not support persistent topology "
                                "Using driver parameter defined value [%s]",
                                lpfc_topo_to_str[phba->cfg_topology]);
                return;
        }
        /* FW supports persistent topology - override module parameter value */
        phba->hba_flag |= HBA_PERSISTENT_TOPO;

        /* if ASIC_GEN_NUM >= 0xC) */
        if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
                    LPFC_SLI_INTF_IF_TYPE_6) ||
            (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
                    LPFC_SLI_INTF_FAMILY_G6)) {
                if (!tf) {
                        phba->cfg_topology = ((pt == LINK_FLAGS_LOOP)
                                        ? FLAGS_TOPOLOGY_MODE_LOOP
                                        : FLAGS_TOPOLOGY_MODE_PT_PT);
                } else {
                        phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
                }
        } else { /* G5 */
                if (tf) {
                        /* If topology failover set - pt is '0' or '1' */
                        phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
                                              FLAGS_TOPOLOGY_MODE_LOOP_PT);
                } else {
                        phba->cfg_topology = ((pt == LINK_FLAGS_P2P)
                                        ? FLAGS_TOPOLOGY_MODE_PT_PT
                                        : FLAGS_TOPOLOGY_MODE_LOOP);
                }
        }
        if (phba->hba_flag & HBA_PERSISTENT_TOPO) {
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "2020 Using persistent topology value [%s]",
                                lpfc_topo_to_str[phba->cfg_topology]);
        } else {
                lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
                                "2021 Invalid topology values from FW "
                                "Using driver parameter defined value [%s]",
                                lpfc_topo_to_str[phba->cfg_topology]);
        }
}

/**
 * lpfc_sli4_read_config - Get the config parameters.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to read the configuration parameters from the HBA.
 * The configuration parameters are used to set the base and maximum values
 * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
 * allocation for the port.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_sli4_read_config(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *pmb;
        struct lpfc_mbx_read_config *rd_config;
        union  lpfc_sli4_cfg_shdr *shdr;
        uint32_t shdr_status, shdr_add_status;
        struct lpfc_mbx_get_func_cfg *get_func_cfg;
        struct lpfc_rsrc_desc_fcfcoe *desc;
        char *pdesc_0;
        uint16_t forced_link_speed;
        uint32_t if_type, qmin, fawwpn;
        int length, i, rc = 0, rc2;

        pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!pmb) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2011 Unable to allocate memory for issuing "
                                "SLI_CONFIG_SPECIAL mailbox command\n");
                return -ENOMEM;
        }

        lpfc_read_config(phba, pmb);

        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
        if (rc != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2012 Mailbox failed , mbxCmd x%x "
                                "READ_CONFIG, mbxStatus x%x\n",
                                bf_get(lpfc_mqe_command, &pmb->u.mqe),
                                bf_get(lpfc_mqe_status, &pmb->u.mqe));
                rc = -EIO;
        } else {
                rd_config = &pmb->u.mqe.un.rd_config;
                if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
                        phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
                        phba->sli4_hba.lnk_info.lnk_tp =
                                bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
                        phba->sli4_hba.lnk_info.lnk_no =
                                bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
                        lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                        "3081 lnk_type:%d, lnk_numb:%d\n",
                                        phba->sli4_hba.lnk_info.lnk_tp,
                                        phba->sli4_hba.lnk_info.lnk_no);
                } else
                        lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
                                        "3082 Mailbox (x%x) returned ldv:x0\n",
                                        bf_get(lpfc_mqe_command, &pmb->u.mqe));
                if (bf_get(lpfc_mbx_rd_conf_bbscn_def, rd_config)) {
                        phba->bbcredit_support = 1;
                        phba->sli4_hba.bbscn_params.word0 = rd_config->word8;
                }

                fawwpn = bf_get(lpfc_mbx_rd_conf_fawwpn, rd_config);

                if (fawwpn) {
                        lpfc_printf_log(phba, KERN_INFO,
                                        LOG_INIT | LOG_DISCOVERY,
                                        "2702 READ_CONFIG: FA-PWWN is "
                                        "configured on\n");
                        phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_CONFIG;
                } else {
                        /* Clear FW configured flag, preserve driver flag */
                        phba->sli4_hba.fawwpn_flag &= ~LPFC_FAWWPN_CONFIG;
                }

                phba->sli4_hba.conf_trunk =
                        bf_get(lpfc_mbx_rd_conf_trunk, rd_config);
                phba->sli4_hba.extents_in_use =
                        bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);

                phba->sli4_hba.max_cfg_param.max_xri =
                        bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
                /* Reduce resource usage in kdump environment */
                if (is_kdump_kernel() &&
                    phba->sli4_hba.max_cfg_param.max_xri > 512)
                        phba->sli4_hba.max_cfg_param.max_xri = 512;
                phba->sli4_hba.max_cfg_param.xri_base =
                        bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
                phba->sli4_hba.max_cfg_param.max_vpi =
                        bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
                /* Limit the max we support */
                if (phba->sli4_hba.max_cfg_param.max_vpi > LPFC_MAX_VPORTS)
                        phba->sli4_hba.max_cfg_param.max_vpi = LPFC_MAX_VPORTS;
                phba->sli4_hba.max_cfg_param.vpi_base =
                        bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
                phba->sli4_hba.max_cfg_param.max_rpi =
                        bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
                phba->sli4_hba.max_cfg_param.rpi_base =
                        bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
                phba->sli4_hba.max_cfg_param.max_vfi =
                        bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
                phba->sli4_hba.max_cfg_param.vfi_base =
                        bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
                phba->sli4_hba.max_cfg_param.max_fcfi =
                        bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
                phba->sli4_hba.max_cfg_param.max_eq =
                        bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
                phba->sli4_hba.max_cfg_param.max_rq =
                        bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
                phba->sli4_hba.max_cfg_param.max_wq =
                        bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
                phba->sli4_hba.max_cfg_param.max_cq =
                        bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
                phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
                phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
                phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
                phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
                phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
                                (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
                phba->max_vports = phba->max_vpi;

                /* Next decide on FPIN or Signal E2E CGN support
                 * For congestion alarms and warnings valid combination are:
                 * 1. FPIN alarms / FPIN warnings
                 * 2. Signal alarms / Signal warnings
                 * 3. FPIN alarms / Signal warnings
                 * 4. Signal alarms / FPIN warnings
                 *
                 * Initialize the adapter frequency to 100 mSecs
                 */
                phba->cgn_reg_fpin = LPFC_CGN_FPIN_BOTH;
                phba->cgn_reg_signal = EDC_CG_SIG_NOTSUPPORTED;
                phba->cgn_sig_freq = lpfc_fabric_cgn_frequency;

                if (lpfc_use_cgn_signal) {
                        if (bf_get(lpfc_mbx_rd_conf_wcs, rd_config)) {
                                phba->cgn_reg_signal = EDC_CG_SIG_WARN_ONLY;
                                phba->cgn_reg_fpin &= ~LPFC_CGN_FPIN_WARN;
                        }
                        if (bf_get(lpfc_mbx_rd_conf_acs, rd_config)) {
                                /* MUST support both alarm and warning
                                 * because EDC does not support alarm alone.
                                 */
                                if (phba->cgn_reg_signal !=
                                    EDC_CG_SIG_WARN_ONLY) {
                                        /* Must support both or none */
                                        phba->cgn_reg_fpin = LPFC_CGN_FPIN_BOTH;
                                        phba->cgn_reg_signal =
                                                EDC_CG_SIG_NOTSUPPORTED;
                                } else {
                                        phba->cgn_reg_signal =
                                                EDC_CG_SIG_WARN_ALARM;
                                        phba->cgn_reg_fpin =
                                                LPFC_CGN_FPIN_NONE;
                                }
                        }
                }

                /* Set the congestion initial signal and fpin values. */
                phba->cgn_init_reg_fpin = phba->cgn_reg_fpin;
                phba->cgn_init_reg_signal = phba->cgn_reg_signal;

                lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                                "6446 READ_CONFIG reg_sig x%x reg_fpin:x%x\n",
                                phba->cgn_reg_signal, phba->cgn_reg_fpin);

                lpfc_map_topology(phba, rd_config);
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "2003 cfg params Extents? %d "
                                "XRI(B:%d M:%d), "
                                "VPI(B:%d M:%d) "
                                "VFI(B:%d M:%d) "
                                "RPI(B:%d M:%d) "
                                "FCFI:%d EQ:%d CQ:%d WQ:%d RQ:%d lmt:x%x\n",
                                phba->sli4_hba.extents_in_use,
                                phba->sli4_hba.max_cfg_param.xri_base,
                                phba->sli4_hba.max_cfg_param.max_xri,
                                phba->sli4_hba.max_cfg_param.vpi_base,
                                phba->sli4_hba.max_cfg_param.max_vpi,
                                phba->sli4_hba.max_cfg_param.vfi_base,
                                phba->sli4_hba.max_cfg_param.max_vfi,
                                phba->sli4_hba.max_cfg_param.rpi_base,
                                phba->sli4_hba.max_cfg_param.max_rpi,
                                phba->sli4_hba.max_cfg_param.max_fcfi,
                                phba->sli4_hba.max_cfg_param.max_eq,
                                phba->sli4_hba.max_cfg_param.max_cq,
                                phba->sli4_hba.max_cfg_param.max_wq,
                                phba->sli4_hba.max_cfg_param.max_rq,
                                phba->lmt);

                /*
                 * Calculate queue resources based on how
                 * many WQ/CQ/EQs are available.
                 */
                qmin = phba->sli4_hba.max_cfg_param.max_wq;
                if (phba->sli4_hba.max_cfg_param.max_cq < qmin)
                        qmin = phba->sli4_hba.max_cfg_param.max_cq;
                /*
                 * Reserve 4 (ELS, NVME LS, MBOX, plus one extra) and
                 * the remainder can be used for NVME / FCP.
                 */
                qmin -= 4;
                if (phba->sli4_hba.max_cfg_param.max_eq < qmin)
                        qmin = phba->sli4_hba.max_cfg_param.max_eq;

                /* Check to see if there is enough for default cfg */
                if ((phba->cfg_irq_chann > qmin) ||
                    (phba->cfg_hdw_queue > qmin)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2005 Reducing Queues - "
                                        "FW resource limitation: "
                                        "WQ %d CQ %d EQ %d: min %d: "
                                        "IRQ %d HDWQ %d\n",
                                        phba->sli4_hba.max_cfg_param.max_wq,
                                        phba->sli4_hba.max_cfg_param.max_cq,
                                        phba->sli4_hba.max_cfg_param.max_eq,
                                        qmin, phba->cfg_irq_chann,
                                        phba->cfg_hdw_queue);

                        if (phba->cfg_irq_chann > qmin)
                                phba->cfg_irq_chann = qmin;
                        if (phba->cfg_hdw_queue > qmin)
                                phba->cfg_hdw_queue = qmin;
                }
        }

        if (rc)
                goto read_cfg_out;

        /* Update link speed if forced link speed is supported */
        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
                forced_link_speed =
                        bf_get(lpfc_mbx_rd_conf_link_speed, rd_config);
                if (forced_link_speed) {
                        phba->hba_flag |= HBA_FORCED_LINK_SPEED;

                        switch (forced_link_speed) {
                        case LINK_SPEED_1G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_1G;
                                break;
                        case LINK_SPEED_2G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_2G;
                                break;
                        case LINK_SPEED_4G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_4G;
                                break;
                        case LINK_SPEED_8G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_8G;
                                break;
                        case LINK_SPEED_10G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_10G;
                                break;
                        case LINK_SPEED_16G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_16G;
                                break;
                        case LINK_SPEED_32G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_32G;
                                break;
                        case LINK_SPEED_64G:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_64G;
                                break;
                        case 0xffff:
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_AUTO;
                                break;
                        default:
                                lpfc_printf_log(phba, KERN_ERR,
                                                LOG_TRACE_EVENT,
                                                "0047 Unrecognized link "
                                                "speed : %d\n",
                                                forced_link_speed);
                                phba->cfg_link_speed =
                                        LPFC_USER_LINK_SPEED_AUTO;
                        }
                }
        }

        /* Reset the DFT_HBA_Q_DEPTH to the max xri  */
        length = phba->sli4_hba.max_cfg_param.max_xri -
                        lpfc_sli4_get_els_iocb_cnt(phba);
        if (phba->cfg_hba_queue_depth > length) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "3361 HBA queue depth changed from %d to %d\n",
                                phba->cfg_hba_queue_depth, length);
                phba->cfg_hba_queue_depth = length;
        }

        if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
            LPFC_SLI_INTF_IF_TYPE_2)
                goto read_cfg_out;

        /* get the pf# and vf# for SLI4 if_type 2 port */
        length = (sizeof(struct lpfc_mbx_get_func_cfg) -
                  sizeof(struct lpfc_sli4_cfg_mhdr));
        lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON,
                         LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG,
                         length, LPFC_SLI4_MBX_EMBED);

        rc2 = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
        shdr = (union lpfc_sli4_cfg_shdr *)
                                &pmb->u.mqe.un.sli4_config.header.cfg_shdr;
        shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
        shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
        if (rc2 || shdr_status || shdr_add_status) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3026 Mailbox failed , mbxCmd x%x "
                                "GET_FUNCTION_CONFIG, mbxStatus x%x\n",
                                bf_get(lpfc_mqe_command, &pmb->u.mqe),
                                bf_get(lpfc_mqe_status, &pmb->u.mqe));
                goto read_cfg_out;
        }

        /* search for fc_fcoe resrouce descriptor */
        get_func_cfg = &pmb->u.mqe.un.get_func_cfg;

        pdesc_0 = (char *)&get_func_cfg->func_cfg.desc[0];
        desc = (struct lpfc_rsrc_desc_fcfcoe *)pdesc_0;
        length = bf_get(lpfc_rsrc_desc_fcfcoe_length, desc);
        if (length == LPFC_RSRC_DESC_TYPE_FCFCOE_V0_RSVD)
                length = LPFC_RSRC_DESC_TYPE_FCFCOE_V0_LENGTH;
        else if (length != LPFC_RSRC_DESC_TYPE_FCFCOE_V1_LENGTH)
                goto read_cfg_out;

        for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) {
                desc = (struct lpfc_rsrc_desc_fcfcoe *)(pdesc_0 + length * i);
                if (LPFC_RSRC_DESC_TYPE_FCFCOE ==
                    bf_get(lpfc_rsrc_desc_fcfcoe_type, desc)) {
                        phba->sli4_hba.iov.pf_number =
                                bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc);
                        phba->sli4_hba.iov.vf_number =
                                bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc);
                        break;
                }
        }

        if (i < LPFC_RSRC_DESC_MAX_NUM)
                lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
                                "3027 GET_FUNCTION_CONFIG: pf_number:%d, "
                                "vf_number:%d\n", phba->sli4_hba.iov.pf_number,
                                phba->sli4_hba.iov.vf_number);
        else
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3028 GET_FUNCTION_CONFIG: failed to find "
                                "Resource Descriptor:x%x\n",
                                LPFC_RSRC_DESC_TYPE_FCFCOE);

read_cfg_out:
        mempool_free(pmb, phba->mbox_mem_pool);
        return rc;
}

/**
 * lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to setup the port-side endian order when
 * the port if_type is 0.  This routine has no function for other
 * if_types.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
static int
lpfc_setup_endian_order(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *mboxq;
        uint32_t if_type, rc = 0;
        uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
                                      HOST_ENDIAN_HIGH_WORD1};

        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
                                                       GFP_KERNEL);
                if (!mboxq) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0492 Unable to allocate memory for "
                                        "issuing SLI_CONFIG_SPECIAL mailbox "
                                        "command\n");
                        return -ENOMEM;
                }

                /*
                 * The SLI4_CONFIG_SPECIAL mailbox command requires the first
                 * two words to contain special data values and no other data.
                 */
                memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
                memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
                rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0493 SLI_CONFIG_SPECIAL mailbox "
                                        "failed with status x%x\n",
                                        rc);
                        rc = -EIO;
                }
                mempool_free(mboxq, phba->mbox_mem_pool);
                break;
        case LPFC_SLI_INTF_IF_TYPE_6:
        case LPFC_SLI_INTF_IF_TYPE_2:
        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                break;
        }
        return rc;
}

/**
 * lpfc_sli4_queue_verify - Verify and update EQ counts
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to check the user settable queue counts for EQs.
 * After this routine is called the counts will be set to valid values that
 * adhere to the constraints of the system's interrupt vectors and the port's
 * queue resources.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 **/
static int
lpfc_sli4_queue_verify(struct lpfc_hba *phba)
{
        /*
         * Sanity check for configured queue parameters against the run-time
         * device parameters
         */

        if (phba->nvmet_support) {
                if (phba->cfg_hdw_queue < phba->cfg_nvmet_mrq)
                        phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
                if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
                        phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
        }

        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                        "2574 IO channels: hdwQ %d IRQ %d MRQ: %d\n",
                        phba->cfg_hdw_queue, phba->cfg_irq_chann,
                        phba->cfg_nvmet_mrq);

        /* Get EQ depth from module parameter, fake the default for now */
        phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
        phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;

        /* Get CQ depth from module parameter, fake the default for now */
        phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
        phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
        return 0;
}

static int
lpfc_alloc_io_wq_cq(struct lpfc_hba *phba, int idx)
{
        struct lpfc_queue *qdesc;
        u32 wqesize;
        int cpu;

        cpu = lpfc_find_cpu_handle(phba, idx, LPFC_FIND_BY_HDWQ);
        /* Create Fast Path IO CQs */
        if (phba->enab_exp_wqcq_pages)
                /* Increase the CQ size when WQEs contain an embedded cdb */
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
                                              phba->sli4_hba.cq_esize,
                                              LPFC_CQE_EXP_COUNT, cpu);

        else
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                              phba->sli4_hba.cq_esize,
                                              phba->sli4_hba.cq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0499 Failed allocate fast-path IO CQ (%d)\n",
                                idx);
                return 1;
        }
        qdesc->qe_valid = 1;
        qdesc->hdwq = idx;
        qdesc->chann = cpu;
        phba->sli4_hba.hdwq[idx].io_cq = qdesc;

        /* Create Fast Path IO WQs */
        if (phba->enab_exp_wqcq_pages) {
                /* Increase the WQ size when WQEs contain an embedded cdb */
                wqesize = (phba->fcp_embed_io) ?
                        LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize;
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE,
                                              wqesize,
                                              LPFC_WQE_EXP_COUNT, cpu);
        } else
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                              phba->sli4_hba.wq_esize,
                                              phba->sli4_hba.wq_ecount, cpu);

        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0503 Failed allocate fast-path IO WQ (%d)\n",
                                idx);
                return 1;
        }
        qdesc->hdwq = idx;
        qdesc->chann = cpu;
        phba->sli4_hba.hdwq[idx].io_wq = qdesc;
        list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);
        return 0;
}

/**
 * lpfc_sli4_queue_create - Create all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
 * operation. For each SLI4 queue type, the parameters such as queue entry
 * count (queue depth) shall be taken from the module parameter. For now,
 * we just use some constant number as place holder.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No availble memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_sli4_queue_create(struct lpfc_hba *phba)
{
        struct lpfc_queue *qdesc;
        int idx, cpu, eqcpu;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_vector_map_info *cpup;
        struct lpfc_vector_map_info *eqcpup;
        struct lpfc_eq_intr_info *eqi;

        /*
         * Create HBA Record arrays.
         * Both NVME and FCP will share that same vectors / EQs
         */
        phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
        phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
        phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
        phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
        phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
        phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
        phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
        phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
        phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
        phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;

        if (!phba->sli4_hba.hdwq) {
                phba->sli4_hba.hdwq = kcalloc(
                        phba->cfg_hdw_queue, sizeof(struct lpfc_sli4_hdw_queue),
                        GFP_KERNEL);
                if (!phba->sli4_hba.hdwq) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6427 Failed allocate memory for "
                                        "fast-path Hardware Queue array\n");
                        goto out_error;
                }
                /* Prepare hardware queues to take IO buffers */
                for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                        qp = &phba->sli4_hba.hdwq[idx];
                        spin_lock_init(&qp->io_buf_list_get_lock);
                        spin_lock_init(&qp->io_buf_list_put_lock);
                        INIT_LIST_HEAD(&qp->lpfc_io_buf_list_get);
                        INIT_LIST_HEAD(&qp->lpfc_io_buf_list_put);
                        qp->get_io_bufs = 0;
                        qp->put_io_bufs = 0;
                        qp->total_io_bufs = 0;
                        spin_lock_init(&qp->abts_io_buf_list_lock);
                        INIT_LIST_HEAD(&qp->lpfc_abts_io_buf_list);
                        qp->abts_scsi_io_bufs = 0;
                        qp->abts_nvme_io_bufs = 0;
                        INIT_LIST_HEAD(&qp->sgl_list);
                        INIT_LIST_HEAD(&qp->cmd_rsp_buf_list);
                        spin_lock_init(&qp->hdwq_lock);
                }
        }

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                if (phba->nvmet_support) {
                        phba->sli4_hba.nvmet_cqset = kcalloc(
                                        phba->cfg_nvmet_mrq,
                                        sizeof(struct lpfc_queue *),
                                        GFP_KERNEL);
                        if (!phba->sli4_hba.nvmet_cqset) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3121 Fail allocate memory for "
                                        "fast-path CQ set array\n");
                                goto out_error;
                        }
                        phba->sli4_hba.nvmet_mrq_hdr = kcalloc(
                                        phba->cfg_nvmet_mrq,
                                        sizeof(struct lpfc_queue *),
                                        GFP_KERNEL);
                        if (!phba->sli4_hba.nvmet_mrq_hdr) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3122 Fail allocate memory for "
                                        "fast-path RQ set hdr array\n");
                                goto out_error;
                        }
                        phba->sli4_hba.nvmet_mrq_data = kcalloc(
                                        phba->cfg_nvmet_mrq,
                                        sizeof(struct lpfc_queue *),
                                        GFP_KERNEL);
                        if (!phba->sli4_hba.nvmet_mrq_data) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3124 Fail allocate memory for "
                                        "fast-path RQ set data array\n");
                                goto out_error;
                        }
                }
        }

        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list);

        /* Create HBA Event Queues (EQs) */
        for_each_present_cpu(cpu) {
                /* We only want to create 1 EQ per vector, even though
                 * multiple CPUs might be using that vector. so only
                 * selects the CPUs that are LPFC_CPU_FIRST_IRQ.
                 */
                cpup = &phba->sli4_hba.cpu_map[cpu];
                if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
                        continue;

                /* Get a ptr to the Hardware Queue associated with this CPU */
                qp = &phba->sli4_hba.hdwq[cpup->hdwq];

                /* Allocate an EQ */
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                              phba->sli4_hba.eq_esize,
                                              phba->sli4_hba.eq_ecount, cpu);
                if (!qdesc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0497 Failed allocate EQ (%d)\n",
                                        cpup->hdwq);
                        goto out_error;
                }
                qdesc->qe_valid = 1;
                qdesc->hdwq = cpup->hdwq;
                qdesc->chann = cpu; /* First CPU this EQ is affinitized to */
                qdesc->last_cpu = qdesc->chann;

                /* Save the allocated EQ in the Hardware Queue */
                qp->hba_eq = qdesc;

                eqi = per_cpu_ptr(phba->sli4_hba.eq_info, qdesc->last_cpu);
                list_add(&qdesc->cpu_list, &eqi->list);
        }

        /* Now we need to populate the other Hardware Queues, that share
         * an IRQ vector, with the associated EQ ptr.
         */
        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* Check for EQ already allocated in previous loop */
                if (cpup->flag & LPFC_CPU_FIRST_IRQ)
                        continue;

                /* Check for multiple CPUs per hdwq */
                qp = &phba->sli4_hba.hdwq[cpup->hdwq];
                if (qp->hba_eq)
                        continue;

                /* We need to share an EQ for this hdwq */
                eqcpu = lpfc_find_cpu_handle(phba, cpup->eq, LPFC_FIND_BY_EQ);
                eqcpup = &phba->sli4_hba.cpu_map[eqcpu];
                qp->hba_eq = phba->sli4_hba.hdwq[eqcpup->hdwq].hba_eq;
        }

        /* Allocate IO Path SLI4 CQ/WQs */
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                if (lpfc_alloc_io_wq_cq(phba, idx))
                        goto out_error;
        }

        if (phba->nvmet_support) {
                for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) {
                        cpu = lpfc_find_cpu_handle(phba, idx,
                                                   LPFC_FIND_BY_HDWQ);
                        qdesc = lpfc_sli4_queue_alloc(phba,
                                                      LPFC_DEFAULT_PAGE_SIZE,
                                                      phba->sli4_hba.cq_esize,
                                                      phba->sli4_hba.cq_ecount,
                                                      cpu);
                        if (!qdesc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "3142 Failed allocate NVME "
                                                "CQ Set (%d)\n", idx);
                                goto out_error;
                        }
                        qdesc->qe_valid = 1;
                        qdesc->hdwq = idx;
                        qdesc->chann = cpu;
                        phba->sli4_hba.nvmet_cqset[idx] = qdesc;
                }
        }

        /*
         * Create Slow Path Completion Queues (CQs)
         */

        cpu = lpfc_find_cpu_handle(phba, 0, LPFC_FIND_BY_EQ);
        /* Create slow-path Mailbox Command Complete Queue */
        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.cq_esize,
                                      phba->sli4_hba.cq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0500 Failed allocate slow-path mailbox CQ\n");
                goto out_error;
        }
        qdesc->qe_valid = 1;
        phba->sli4_hba.mbx_cq = qdesc;

        /* Create slow-path ELS Complete Queue */
        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.cq_esize,
                                      phba->sli4_hba.cq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0501 Failed allocate slow-path ELS CQ\n");
                goto out_error;
        }
        qdesc->qe_valid = 1;
        qdesc->chann = cpu;
        phba->sli4_hba.els_cq = qdesc;


        /*
         * Create Slow Path Work Queues (WQs)
         */

        /* Create Mailbox Command Queue */

        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.mq_esize,
                                      phba->sli4_hba.mq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0505 Failed allocate slow-path MQ\n");
                goto out_error;
        }
        qdesc->chann = cpu;
        phba->sli4_hba.mbx_wq = qdesc;

        /*
         * Create ELS Work Queues
         */

        /* Create slow-path ELS Work Queue */
        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.wq_esize,
                                      phba->sli4_hba.wq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0504 Failed allocate slow-path ELS WQ\n");
                goto out_error;
        }
        qdesc->chann = cpu;
        phba->sli4_hba.els_wq = qdesc;
        list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                /* Create NVME LS Complete Queue */
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                              phba->sli4_hba.cq_esize,
                                              phba->sli4_hba.cq_ecount, cpu);
                if (!qdesc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6079 Failed allocate NVME LS CQ\n");
                        goto out_error;
                }
                qdesc->chann = cpu;
                qdesc->qe_valid = 1;
                phba->sli4_hba.nvmels_cq = qdesc;

                /* Create NVME LS Work Queue */
                qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                              phba->sli4_hba.wq_esize,
                                              phba->sli4_hba.wq_ecount, cpu);
                if (!qdesc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6080 Failed allocate NVME LS WQ\n");
                        goto out_error;
                }
                qdesc->chann = cpu;
                phba->sli4_hba.nvmels_wq = qdesc;
                list_add_tail(&qdesc->wq_list, &phba->sli4_hba.lpfc_wq_list);
        }

        /*
         * Create Receive Queue (RQ)
         */

        /* Create Receive Queue for header */
        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.rq_esize,
                                      phba->sli4_hba.rq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0506 Failed allocate receive HRQ\n");
                goto out_error;
        }
        phba->sli4_hba.hdr_rq = qdesc;

        /* Create Receive Queue for data */
        qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE,
                                      phba->sli4_hba.rq_esize,
                                      phba->sli4_hba.rq_ecount, cpu);
        if (!qdesc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0507 Failed allocate receive DRQ\n");
                goto out_error;
        }
        phba->sli4_hba.dat_rq = qdesc;

        if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) &&
            phba->nvmet_support) {
                for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) {
                        cpu = lpfc_find_cpu_handle(phba, idx,
                                                   LPFC_FIND_BY_HDWQ);
                        /* Create NVMET Receive Queue for header */
                        qdesc = lpfc_sli4_queue_alloc(phba,
                                                      LPFC_DEFAULT_PAGE_SIZE,
                                                      phba->sli4_hba.rq_esize,
                                                      LPFC_NVMET_RQE_DEF_COUNT,
                                                      cpu);
                        if (!qdesc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "3146 Failed allocate "
                                                "receive HRQ\n");
                                goto out_error;
                        }
                        qdesc->hdwq = idx;
                        phba->sli4_hba.nvmet_mrq_hdr[idx] = qdesc;

                        /* Only needed for header of RQ pair */
                        qdesc->rqbp = kzalloc_node(sizeof(*qdesc->rqbp),
                                                   GFP_KERNEL,
                                                   cpu_to_node(cpu));
                        if (qdesc->rqbp == NULL) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6131 Failed allocate "
                                                "Header RQBP\n");
                                goto out_error;
                        }

                        /* Put list in known state in case driver load fails. */
                        INIT_LIST_HEAD(&qdesc->rqbp->rqb_buffer_list);

                        /* Create NVMET Receive Queue for data */
                        qdesc = lpfc_sli4_queue_alloc(phba,
                                                      LPFC_DEFAULT_PAGE_SIZE,
                                                      phba->sli4_hba.rq_esize,
                                                      LPFC_NVMET_RQE_DEF_COUNT,
                                                      cpu);
                        if (!qdesc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "3156 Failed allocate "
                                                "receive DRQ\n");
                                goto out_error;
                        }
                        qdesc->hdwq = idx;
                        phba->sli4_hba.nvmet_mrq_data[idx] = qdesc;
                }
        }

        /* Clear NVME stats */
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                        memset(&phba->sli4_hba.hdwq[idx].nvme_cstat, 0,
                               sizeof(phba->sli4_hba.hdwq[idx].nvme_cstat));
                }
        }

        /* Clear SCSI stats */
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) {
                for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                        memset(&phba->sli4_hba.hdwq[idx].scsi_cstat, 0,
                               sizeof(phba->sli4_hba.hdwq[idx].scsi_cstat));
                }
        }

        return 0;

out_error:
        lpfc_sli4_queue_destroy(phba);
        return -ENOMEM;
}

static inline void
__lpfc_sli4_release_queue(struct lpfc_queue **qp)
{
        if (*qp != NULL) {
                lpfc_sli4_queue_free(*qp);
                *qp = NULL;
        }
}

static inline void
lpfc_sli4_release_queues(struct lpfc_queue ***qs, int max)
{
        int idx;

        if (*qs == NULL)
                return;

        for (idx = 0; idx < max; idx++)
                __lpfc_sli4_release_queue(&(*qs)[idx]);

        kfree(*qs);
        *qs = NULL;
}

static inline void
lpfc_sli4_release_hdwq(struct lpfc_hba *phba)
{
        struct lpfc_sli4_hdw_queue *hdwq;
        struct lpfc_queue *eq;
        uint32_t idx;

        hdwq = phba->sli4_hba.hdwq;

        /* Loop thru all Hardware Queues */
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                /* Free the CQ/WQ corresponding to the Hardware Queue */
                lpfc_sli4_queue_free(hdwq[idx].io_cq);
                lpfc_sli4_queue_free(hdwq[idx].io_wq);
                hdwq[idx].hba_eq = NULL;
                hdwq[idx].io_cq = NULL;
                hdwq[idx].io_wq = NULL;
                if (phba->cfg_xpsgl && !phba->nvmet_support)
                        lpfc_free_sgl_per_hdwq(phba, &hdwq[idx]);
                lpfc_free_cmd_rsp_buf_per_hdwq(phba, &hdwq[idx]);
        }
        /* Loop thru all IRQ vectors */
        for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
                /* Free the EQ corresponding to the IRQ vector */
                eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
                lpfc_sli4_queue_free(eq);
                phba->sli4_hba.hba_eq_hdl[idx].eq = NULL;
        }
}

/**
 * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to release all the SLI4 queues with the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
void
lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
{
        /*
         * Set FREE_INIT before beginning to free the queues.
         * Wait until the users of queues to acknowledge to
         * release queues by clearing FREE_WAIT.
         */
        spin_lock_irq(&phba->hbalock);
        phba->sli.sli_flag |= LPFC_QUEUE_FREE_INIT;
        while (phba->sli.sli_flag & LPFC_QUEUE_FREE_WAIT) {
                spin_unlock_irq(&phba->hbalock);
                msleep(20);
                spin_lock_irq(&phba->hbalock);
        }
        spin_unlock_irq(&phba->hbalock);

        lpfc_sli4_cleanup_poll_list(phba);

        /* Release HBA eqs */
        if (phba->sli4_hba.hdwq)
                lpfc_sli4_release_hdwq(phba);

        if (phba->nvmet_support) {
                lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_cqset,
                                         phba->cfg_nvmet_mrq);

                lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_mrq_hdr,
                                         phba->cfg_nvmet_mrq);
                lpfc_sli4_release_queues(&phba->sli4_hba.nvmet_mrq_data,
                                         phba->cfg_nvmet_mrq);
        }

        /* Release mailbox command work queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.mbx_wq);

        /* Release ELS work queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.els_wq);

        /* Release ELS work queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.nvmels_wq);

        /* Release unsolicited receive queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.hdr_rq);
        __lpfc_sli4_release_queue(&phba->sli4_hba.dat_rq);

        /* Release ELS complete queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.els_cq);

        /* Release NVME LS complete queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.nvmels_cq);

        /* Release mailbox command complete queue */
        __lpfc_sli4_release_queue(&phba->sli4_hba.mbx_cq);

        /* Everything on this list has been freed */
        INIT_LIST_HEAD(&phba->sli4_hba.lpfc_wq_list);

        /* Done with freeing the queues */
        spin_lock_irq(&phba->hbalock);
        phba->sli.sli_flag &= ~LPFC_QUEUE_FREE_INIT;
        spin_unlock_irq(&phba->hbalock);
}

int
lpfc_free_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *rq)
{
        struct lpfc_rqb *rqbp;
        struct lpfc_dmabuf *h_buf;
        struct rqb_dmabuf *rqb_buffer;

        rqbp = rq->rqbp;
        while (!list_empty(&rqbp->rqb_buffer_list)) {
                list_remove_head(&rqbp->rqb_buffer_list, h_buf,
                                 struct lpfc_dmabuf, list);

                rqb_buffer = container_of(h_buf, struct rqb_dmabuf, hbuf);
                (rqbp->rqb_free_buffer)(phba, rqb_buffer);
                rqbp->buffer_count--;
        }
        return 1;
}

static int
lpfc_create_wq_cq(struct lpfc_hba *phba, struct lpfc_queue *eq,
        struct lpfc_queue *cq, struct lpfc_queue *wq, uint16_t *cq_map,
        int qidx, uint32_t qtype)
{
        struct lpfc_sli_ring *pring;
        int rc;

        if (!eq || !cq || !wq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "6085 Fast-path %s (%d) not allocated\n",
                        ((eq) ? ((cq) ? "WQ" : "CQ") : "EQ"), qidx);
                return -ENOMEM;
        }

        /* create the Cq first */
        rc = lpfc_cq_create(phba, cq, eq,
                        (qtype == LPFC_MBOX) ? LPFC_MCQ : LPFC_WCQ, qtype);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "6086 Failed setup of CQ (%d), rc = 0x%x\n",
                                qidx, (uint32_t)rc);
                return rc;
        }

        if (qtype != LPFC_MBOX) {
                /* Setup cq_map for fast lookup */
                if (cq_map)
                        *cq_map = cq->queue_id;

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "6087 CQ setup: cq[%d]-id=%d, parent eq[%d]-id=%d\n",
                        qidx, cq->queue_id, qidx, eq->queue_id);

                /* create the wq */
                rc = lpfc_wq_create(phba, wq, cq, qtype);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "4618 Fail setup fastpath WQ (%d), rc = 0x%x\n",
                                qidx, (uint32_t)rc);
                        /* no need to tear down cq - caller will do so */
                        return rc;
                }

                /* Bind this CQ/WQ to the NVME ring */
                pring = wq->pring;
                pring->sli.sli4.wqp = (void *)wq;
                cq->pring = pring;

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "2593 WQ setup: wq[%d]-id=%d assoc=%d, cq[%d]-id=%d\n",
                        qidx, wq->queue_id, wq->assoc_qid, qidx, cq->queue_id);
        } else {
                rc = lpfc_mq_create(phba, wq, cq, LPFC_MBOX);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0539 Failed setup of slow-path MQ: "
                                        "rc = 0x%x\n", rc);
                        /* no need to tear down cq - caller will do so */
                        return rc;
                }

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
                        phba->sli4_hba.mbx_wq->queue_id,
                        phba->sli4_hba.mbx_cq->queue_id);
        }

        return 0;
}

/**
 * lpfc_setup_cq_lookup - Setup the CQ lookup table
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine will populate the cq_lookup table by all
 * available CQ queue_id's.
 **/
static void
lpfc_setup_cq_lookup(struct lpfc_hba *phba)
{
        struct lpfc_queue *eq, *childq;
        int qidx;

        memset(phba->sli4_hba.cq_lookup, 0,
               (sizeof(struct lpfc_queue *) * (phba->sli4_hba.cq_max + 1)));
        /* Loop thru all IRQ vectors */
        for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
                /* Get the EQ corresponding to the IRQ vector */
                eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
                if (!eq)
                        continue;
                /* Loop through all CQs associated with that EQ */
                list_for_each_entry(childq, &eq->child_list, list) {
                        if (childq->queue_id > phba->sli4_hba.cq_max)
                                continue;
                        if (childq->subtype == LPFC_IO)
                                phba->sli4_hba.cq_lookup[childq->queue_id] =
                                        childq;
                }
        }
}

/**
 * lpfc_sli4_queue_setup - Set up all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_sli4_queue_setup(struct lpfc_hba *phba)
{
        uint32_t shdr_status, shdr_add_status;
        union lpfc_sli4_cfg_shdr *shdr;
        struct lpfc_vector_map_info *cpup;
        struct lpfc_sli4_hdw_queue *qp;
        LPFC_MBOXQ_t *mboxq;
        int qidx, cpu;
        uint32_t length, usdelay;
        int rc = -ENOMEM;

        /* Check for dual-ULP support */
        mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!mboxq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3249 Unable to allocate memory for "
                                "QUERY_FW_CFG mailbox command\n");
                return -ENOMEM;
        }
        length = (sizeof(struct lpfc_mbx_query_fw_config) -
                  sizeof(struct lpfc_sli4_cfg_mhdr));
        lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
                         LPFC_MBOX_OPCODE_QUERY_FW_CFG,
                         length, LPFC_SLI4_MBX_EMBED);

        rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);

        shdr = (union lpfc_sli4_cfg_shdr *)
                        &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
        shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
        shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
        if (shdr_status || shdr_add_status || rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3250 QUERY_FW_CFG mailbox failed with status "
                                "x%x add_status x%x, mbx status x%x\n",
                                shdr_status, shdr_add_status, rc);
                mempool_free(mboxq, phba->mbox_mem_pool);
                rc = -ENXIO;
                goto out_error;
        }

        phba->sli4_hba.fw_func_mode =
                        mboxq->u.mqe.un.query_fw_cfg.rsp.function_mode;
        phba->sli4_hba.ulp0_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp0_mode;
        phba->sli4_hba.ulp1_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp1_mode;
        phba->sli4_hba.physical_port =
                        mboxq->u.mqe.un.query_fw_cfg.rsp.physical_port;
        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "3251 QUERY_FW_CFG: func_mode:x%x, ulp0_mode:x%x, "
                        "ulp1_mode:x%x\n", phba->sli4_hba.fw_func_mode,
                        phba->sli4_hba.ulp0_mode, phba->sli4_hba.ulp1_mode);

        mempool_free(mboxq, phba->mbox_mem_pool);

        /*
         * Set up HBA Event Queues (EQs)
         */
        qp = phba->sli4_hba.hdwq;

        /* Set up HBA event queue */
        if (!qp) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3147 Fast-path EQs not allocated\n");
                rc = -ENOMEM;
                goto out_error;
        }

        /* Loop thru all IRQ vectors */
        for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
                /* Create HBA Event Queues (EQs) in order */
                for_each_present_cpu(cpu) {
                        cpup = &phba->sli4_hba.cpu_map[cpu];

                        /* Look for the CPU thats using that vector with
                         * LPFC_CPU_FIRST_IRQ set.
                         */
                        if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
                                continue;
                        if (qidx != cpup->eq)
                                continue;

                        /* Create an EQ for that vector */
                        rc = lpfc_eq_create(phba, qp[cpup->hdwq].hba_eq,
                                            phba->cfg_fcp_imax);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "0523 Failed setup of fast-path"
                                                " EQ (%d), rc = 0x%x\n",
                                                cpup->eq, (uint32_t)rc);
                                goto out_destroy;
                        }

                        /* Save the EQ for that vector in the hba_eq_hdl */
                        phba->sli4_hba.hba_eq_hdl[cpup->eq].eq =
                                qp[cpup->hdwq].hba_eq;

                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "2584 HBA EQ setup: queue[%d]-id=%d\n",
                                        cpup->eq,
                                        qp[cpup->hdwq].hba_eq->queue_id);
                }
        }

        /* Loop thru all Hardware Queues */
        for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
                cpu = lpfc_find_cpu_handle(phba, qidx, LPFC_FIND_BY_HDWQ);
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* Create the CQ/WQ corresponding to the Hardware Queue */
                rc = lpfc_create_wq_cq(phba,
                                       phba->sli4_hba.hdwq[cpup->hdwq].hba_eq,
                                       qp[qidx].io_cq,
                                       qp[qidx].io_wq,
                                       &phba->sli4_hba.hdwq[qidx].io_cq_map,
                                       qidx,
                                       LPFC_IO);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0535 Failed to setup fastpath "
                                        "IO WQ/CQ (%d), rc = 0x%x\n",
                                        qidx, (uint32_t)rc);
                        goto out_destroy;
                }
        }

        /*
         * Set up Slow Path Complete Queues (CQs)
         */

        /* Set up slow-path MBOX CQ/MQ */

        if (!phba->sli4_hba.mbx_cq || !phba->sli4_hba.mbx_wq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0528 %s not allocated\n",
                                phba->sli4_hba.mbx_cq ?
                                "Mailbox WQ" : "Mailbox CQ");
                rc = -ENOMEM;
                goto out_destroy;
        }

        rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
                               phba->sli4_hba.mbx_cq,
                               phba->sli4_hba.mbx_wq,
                               NULL, 0, LPFC_MBOX);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "0529 Failed setup of mailbox WQ/CQ: rc = 0x%x\n",
                        (uint32_t)rc);
                goto out_destroy;
        }
        if (phba->nvmet_support) {
                if (!phba->sli4_hba.nvmet_cqset) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "3165 Fast-path NVME CQ Set "
                                        "array not allocated\n");
                        rc = -ENOMEM;
                        goto out_destroy;
                }
                if (phba->cfg_nvmet_mrq > 1) {
                        rc = lpfc_cq_create_set(phba,
                                        phba->sli4_hba.nvmet_cqset,
                                        qp,
                                        LPFC_WCQ, LPFC_NVMET);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "3164 Failed setup of NVME CQ "
                                                "Set, rc = 0x%x\n",
                                                (uint32_t)rc);
                                goto out_destroy;
                        }
                } else {
                        /* Set up NVMET Receive Complete Queue */
                        rc = lpfc_cq_create(phba, phba->sli4_hba.nvmet_cqset[0],
                                            qp[0].hba_eq,
                                            LPFC_WCQ, LPFC_NVMET);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6089 Failed setup NVMET CQ: "
                                                "rc = 0x%x\n", (uint32_t)rc);
                                goto out_destroy;
                        }
                        phba->sli4_hba.nvmet_cqset[0]->chann = 0;

                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "6090 NVMET CQ setup: cq-id=%d, "
                                        "parent eq-id=%d\n",
                                        phba->sli4_hba.nvmet_cqset[0]->queue_id,
                                        qp[0].hba_eq->queue_id);
                }
        }

        /* Set up slow-path ELS WQ/CQ */
        if (!phba->sli4_hba.els_cq || !phba->sli4_hba.els_wq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0530 ELS %s not allocated\n",
                                phba->sli4_hba.els_cq ? "WQ" : "CQ");
                rc = -ENOMEM;
                goto out_destroy;
        }
        rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
                               phba->sli4_hba.els_cq,
                               phba->sli4_hba.els_wq,
                               NULL, 0, LPFC_ELS);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0525 Failed setup of ELS WQ/CQ: rc = 0x%x\n",
                                (uint32_t)rc);
                goto out_destroy;
        }
        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
                        phba->sli4_hba.els_wq->queue_id,
                        phba->sli4_hba.els_cq->queue_id);

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                /* Set up NVME LS Complete Queue */
                if (!phba->sli4_hba.nvmels_cq || !phba->sli4_hba.nvmels_wq) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6091 LS %s not allocated\n",
                                        phba->sli4_hba.nvmels_cq ? "WQ" : "CQ");
                        rc = -ENOMEM;
                        goto out_destroy;
                }
                rc = lpfc_create_wq_cq(phba, qp[0].hba_eq,
                                       phba->sli4_hba.nvmels_cq,
                                       phba->sli4_hba.nvmels_wq,
                                       NULL, 0, LPFC_NVME_LS);
                if (rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0526 Failed setup of NVVME LS WQ/CQ: "
                                        "rc = 0x%x\n", (uint32_t)rc);
                        goto out_destroy;
                }

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "6096 ELS WQ setup: wq-id=%d, "
                                "parent cq-id=%d\n",
                                phba->sli4_hba.nvmels_wq->queue_id,
                                phba->sli4_hba.nvmels_cq->queue_id);
        }

        /*
         * Create NVMET Receive Queue (RQ)
         */
        if (phba->nvmet_support) {
                if ((!phba->sli4_hba.nvmet_cqset) ||
                    (!phba->sli4_hba.nvmet_mrq_hdr) ||
                    (!phba->sli4_hba.nvmet_mrq_data)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "6130 MRQ CQ Queues not "
                                        "allocated\n");
                        rc = -ENOMEM;
                        goto out_destroy;
                }
                if (phba->cfg_nvmet_mrq > 1) {
                        rc = lpfc_mrq_create(phba,
                                             phba->sli4_hba.nvmet_mrq_hdr,
                                             phba->sli4_hba.nvmet_mrq_data,
                                             phba->sli4_hba.nvmet_cqset,
                                             LPFC_NVMET);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6098 Failed setup of NVMET "
                                                "MRQ: rc = 0x%x\n",
                                                (uint32_t)rc);
                                goto out_destroy;
                        }

                } else {
                        rc = lpfc_rq_create(phba,
                                            phba->sli4_hba.nvmet_mrq_hdr[0],
                                            phba->sli4_hba.nvmet_mrq_data[0],
                                            phba->sli4_hba.nvmet_cqset[0],
                                            LPFC_NVMET);
                        if (rc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6057 Failed setup of NVMET "
                                                "Receive Queue: rc = 0x%x\n",
                                                (uint32_t)rc);
                                goto out_destroy;
                        }

                        lpfc_printf_log(
                                phba, KERN_INFO, LOG_INIT,
                                "6099 NVMET RQ setup: hdr-rq-id=%d, "
                                "dat-rq-id=%d parent cq-id=%d\n",
                                phba->sli4_hba.nvmet_mrq_hdr[0]->queue_id,
                                phba->sli4_hba.nvmet_mrq_data[0]->queue_id,
                                phba->sli4_hba.nvmet_cqset[0]->queue_id);

                }
        }

        if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0540 Receive Queue not allocated\n");
                rc = -ENOMEM;
                goto out_destroy;
        }

        rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
                            phba->sli4_hba.els_cq, LPFC_USOL);
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0541 Failed setup of Receive Queue: "
                                "rc = 0x%x\n", (uint32_t)rc);
                goto out_destroy;
        }

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
                        "parent cq-id=%d\n",
                        phba->sli4_hba.hdr_rq->queue_id,
                        phba->sli4_hba.dat_rq->queue_id,
                        phba->sli4_hba.els_cq->queue_id);

        if (phba->cfg_fcp_imax)
                usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax;
        else
                usdelay = 0;

        for (qidx = 0; qidx < phba->cfg_irq_chann;
             qidx += LPFC_MAX_EQ_DELAY_EQID_CNT)
                lpfc_modify_hba_eq_delay(phba, qidx, LPFC_MAX_EQ_DELAY_EQID_CNT,
                                         usdelay);

        if (phba->sli4_hba.cq_max) {
                kfree(phba->sli4_hba.cq_lookup);
                phba->sli4_hba.cq_lookup = kcalloc((phba->sli4_hba.cq_max + 1),
                        sizeof(struct lpfc_queue *), GFP_KERNEL);
                if (!phba->sli4_hba.cq_lookup) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0549 Failed setup of CQ Lookup table: "
                                        "size 0x%x\n", phba->sli4_hba.cq_max);
                        rc = -ENOMEM;
                        goto out_destroy;
                }
                lpfc_setup_cq_lookup(phba);
        }
        return 0;

out_destroy:
        lpfc_sli4_queue_unset(phba);
out_error:
        return rc;
}

/**
 * lpfc_sli4_queue_unset - Unset all the SLI4 queues
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
 * operation.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
void
lpfc_sli4_queue_unset(struct lpfc_hba *phba)
{
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_queue *eq;
        int qidx;

        /* Unset mailbox command work queue */
        if (phba->sli4_hba.mbx_wq)
                lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);

        /* Unset NVME LS work queue */
        if (phba->sli4_hba.nvmels_wq)
                lpfc_wq_destroy(phba, phba->sli4_hba.nvmels_wq);

        /* Unset ELS work queue */
        if (phba->sli4_hba.els_wq)
                lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);

        /* Unset unsolicited receive queue */
        if (phba->sli4_hba.hdr_rq)
                lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq,
                                phba->sli4_hba.dat_rq);

        /* Unset mailbox command complete queue */
        if (phba->sli4_hba.mbx_cq)
                lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);

        /* Unset ELS complete queue */
        if (phba->sli4_hba.els_cq)
                lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);

        /* Unset NVME LS complete queue */
        if (phba->sli4_hba.nvmels_cq)
                lpfc_cq_destroy(phba, phba->sli4_hba.nvmels_cq);

        if (phba->nvmet_support) {
                /* Unset NVMET MRQ queue */
                if (phba->sli4_hba.nvmet_mrq_hdr) {
                        for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++)
                                lpfc_rq_destroy(
                                        phba,
                                        phba->sli4_hba.nvmet_mrq_hdr[qidx],
                                        phba->sli4_hba.nvmet_mrq_data[qidx]);
                }

                /* Unset NVMET CQ Set complete queue */
                if (phba->sli4_hba.nvmet_cqset) {
                        for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++)
                                lpfc_cq_destroy(
                                        phba, phba->sli4_hba.nvmet_cqset[qidx]);
                }
        }

        /* Unset fast-path SLI4 queues */
        if (phba->sli4_hba.hdwq) {
                /* Loop thru all Hardware Queues */
                for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
                        /* Destroy the CQ/WQ corresponding to Hardware Queue */
                        qp = &phba->sli4_hba.hdwq[qidx];
                        lpfc_wq_destroy(phba, qp->io_wq);
                        lpfc_cq_destroy(phba, qp->io_cq);
                }
                /* Loop thru all IRQ vectors */
                for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
                        /* Destroy the EQ corresponding to the IRQ vector */
                        eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
                        lpfc_eq_destroy(phba, eq);
                }
        }

        kfree(phba->sli4_hba.cq_lookup);
        phba->sli4_hba.cq_lookup = NULL;
        phba->sli4_hba.cq_max = 0;
}

/**
 * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to allocate and set up a pool of completion queue
 * events. The body of the completion queue event is a completion queue entry
 * CQE. For now, this pool is used for the interrupt service routine to queue
 * the following HBA completion queue events for the worker thread to process:
 *   - Mailbox asynchronous events
 *   - Receive queue completion unsolicited events
 * Later, this can be used for all the slow-path events.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 **/
static int
lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
{
        struct lpfc_cq_event *cq_event;
        int i;

        for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
                cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
                if (!cq_event)
                        goto out_pool_create_fail;
                list_add_tail(&cq_event->list,
                              &phba->sli4_hba.sp_cqe_event_pool);
        }
        return 0;

out_pool_create_fail:
        lpfc_sli4_cq_event_pool_destroy(phba);
        return -ENOMEM;
}

/**
 * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to free the pool of completion queue events at
 * driver unload time. Note that, it is the responsibility of the driver
 * cleanup routine to free all the outstanding completion-queue events
 * allocated from this pool back into the pool before invoking this routine
 * to destroy the pool.
 **/
static void
lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
{
        struct lpfc_cq_event *cq_event, *next_cq_event;

        list_for_each_entry_safe(cq_event, next_cq_event,
                                 &phba->sli4_hba.sp_cqe_event_pool, list) {
                list_del(&cq_event->list);
                kfree(cq_event);
        }
}

/**
 * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is the lock free version of the API invoked to allocate a
 * completion-queue event from the free pool.
 *
 * Return: Pointer to the newly allocated completion-queue event if successful
 *         NULL otherwise.
 **/
struct lpfc_cq_event *
__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
        struct lpfc_cq_event *cq_event = NULL;

        list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
                         struct lpfc_cq_event, list);
        return cq_event;
}

/**
 * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is the lock version of the API invoked to allocate a
 * completion-queue event from the free pool.
 *
 * Return: Pointer to the newly allocated completion-queue event if successful
 *         NULL otherwise.
 **/
struct lpfc_cq_event *
lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
{
        struct lpfc_cq_event *cq_event;
        unsigned long iflags;

        spin_lock_irqsave(&phba->hbalock, iflags);
        cq_event = __lpfc_sli4_cq_event_alloc(phba);
        spin_unlock_irqrestore(&phba->hbalock, iflags);
        return cq_event;
}

/**
 * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
 * @phba: pointer to lpfc hba data structure.
 * @cq_event: pointer to the completion queue event to be freed.
 *
 * This routine is the lock free version of the API invoked to release a
 * completion-queue event back into the free pool.
 **/
void
__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
                             struct lpfc_cq_event *cq_event)
{
        list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
}

/**
 * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
 * @phba: pointer to lpfc hba data structure.
 * @cq_event: pointer to the completion queue event to be freed.
 *
 * This routine is the lock version of the API invoked to release a
 * completion-queue event back into the free pool.
 **/
void
lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
                           struct lpfc_cq_event *cq_event)
{
        unsigned long iflags;
        spin_lock_irqsave(&phba->hbalock, iflags);
        __lpfc_sli4_cq_event_release(phba, cq_event);
        spin_unlock_irqrestore(&phba->hbalock, iflags);
}

/**
 * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is to free all the pending completion-queue events to the
 * back into the free pool for device reset.
 **/
static void
lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
{
        LIST_HEAD(cq_event_list);
        struct lpfc_cq_event *cq_event;
        unsigned long iflags;

        /* Retrieve all the pending WCQEs from pending WCQE lists */

        /* Pending ELS XRI abort events */
        spin_lock_irqsave(&phba->sli4_hba.els_xri_abrt_list_lock, iflags);
        list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
                         &cq_event_list);
        spin_unlock_irqrestore(&phba->sli4_hba.els_xri_abrt_list_lock, iflags);

        /* Pending asynnc events */
        spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags);
        list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
                         &cq_event_list);
        spin_unlock_irqrestore(&phba->sli4_hba.asynce_list_lock, iflags);

        while (!list_empty(&cq_event_list)) {
                list_remove_head(&cq_event_list, cq_event,
                                 struct lpfc_cq_event, list);
                lpfc_sli4_cq_event_release(phba, cq_event);
        }
}

/**
 * lpfc_pci_function_reset - Reset pci function.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to request a PCI function reset. It will destroys
 * all resources assigned to the PCI function which originates this request.
 *
 * Return codes
 *      0 - successful
 *      -ENOMEM - No available memory
 *      -EIO - The mailbox failed to complete successfully.
 **/
int
lpfc_pci_function_reset(struct lpfc_hba *phba)
{
        LPFC_MBOXQ_t *mboxq;
        uint32_t rc = 0, if_type;
        uint32_t shdr_status, shdr_add_status;
        uint32_t rdy_chk;
        uint32_t port_reset = 0;
        union lpfc_sli4_cfg_shdr *shdr;
        struct lpfc_register reg_data;
        uint16_t devid;

        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
                                                       GFP_KERNEL);
                if (!mboxq) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0494 Unable to allocate memory for "
                                        "issuing SLI_FUNCTION_RESET mailbox "
                                        "command\n");
                        return -ENOMEM;
                }

                /* Setup PCI function reset mailbox-ioctl command */
                lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
                                 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
                                 LPFC_SLI4_MBX_EMBED);
                rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
                shdr = (union lpfc_sli4_cfg_shdr *)
                        &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
                shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
                shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
                                         &shdr->response);
                mempool_free(mboxq, phba->mbox_mem_pool);
                if (shdr_status || shdr_add_status || rc) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0495 SLI_FUNCTION_RESET mailbox "
                                        "failed with status x%x add_status x%x,"
                                        " mbx status x%x\n",
                                        shdr_status, shdr_add_status, rc);
                        rc = -ENXIO;
                }
                break;
        case LPFC_SLI_INTF_IF_TYPE_2:
        case LPFC_SLI_INTF_IF_TYPE_6:
wait:
                /*
                 * Poll the Port Status Register and wait for RDY for
                 * up to 30 seconds. If the port doesn't respond, treat
                 * it as an error.
                 */
                for (rdy_chk = 0; rdy_chk < 1500; rdy_chk++) {
                        if (lpfc_readl(phba->sli4_hba.u.if_type2.
                                STATUSregaddr, &reg_data.word0)) {
                                rc = -ENODEV;
                                goto out;
                        }
                        if (bf_get(lpfc_sliport_status_rdy, &reg_data))
                                break;
                        msleep(20);
                }

                if (!bf_get(lpfc_sliport_status_rdy, &reg_data)) {
                        phba->work_status[0] = readl(
                                phba->sli4_hba.u.if_type2.ERR1regaddr);
                        phba->work_status[1] = readl(
                                phba->sli4_hba.u.if_type2.ERR2regaddr);
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "2890 Port not ready, port status reg "
                                        "0x%x error 1=0x%x, error 2=0x%x\n",
                                        reg_data.word0,
                                        phba->work_status[0],
                                        phba->work_status[1]);
                        rc = -ENODEV;
                        goto out;
                }

                if (bf_get(lpfc_sliport_status_pldv, &reg_data))
                        lpfc_pldv_detect = true;

                if (!port_reset) {
                        /*
                         * Reset the port now
                         */
                        reg_data.word0 = 0;
                        bf_set(lpfc_sliport_ctrl_end, &reg_data,
                               LPFC_SLIPORT_LITTLE_ENDIAN);
                        bf_set(lpfc_sliport_ctrl_ip, &reg_data,
                               LPFC_SLIPORT_INIT_PORT);
                        writel(reg_data.word0, phba->sli4_hba.u.if_type2.
                               CTRLregaddr);
                        /* flush */
                        pci_read_config_word(phba->pcidev,
                                             PCI_DEVICE_ID, &devid);

                        port_reset = 1;
                        msleep(20);
                        goto wait;
                } else if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
                        rc = -ENODEV;
                        goto out;
                }
                break;

        case LPFC_SLI_INTF_IF_TYPE_1:
        default:
                break;
        }

out:
        /* Catch the not-ready port failure after a port reset. */
        if (rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3317 HBA not functional: IP Reset Failed "
                                "try: echo fw_reset > board_mode\n");
                rc = -ENODEV;
        }

        return rc;
}

/**
 * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to set up the PCI device memory space for device
 * with SLI-4 interface spec.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
{
        struct pci_dev *pdev = phba->pcidev;
        unsigned long bar0map_len, bar1map_len, bar2map_len;
        int error;
        uint32_t if_type;

        if (!pdev)
                return -ENODEV;

        /* Set the device DMA mask size */
        error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
        if (error)
                error = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
        if (error)
                return error;

        /*
         * The BARs and register set definitions and offset locations are
         * dependent on the if_type.
         */
        if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
                                  &phba->sli4_hba.sli_intf.word0)) {
                return -ENODEV;
        }

        /* There is no SLI3 failback for SLI4 devices. */
        if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) !=
            LPFC_SLI_INTF_VALID) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "2894 SLI_INTF reg contents invalid "
                                "sli_intf reg 0x%x\n",
                                phba->sli4_hba.sli_intf.word0);
                return -ENODEV;
        }

        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        /*
         * Get the bus address of SLI4 device Bar regions and the
         * number of bytes required by each mapping. The mapping of the
         * particular PCI BARs regions is dependent on the type of
         * SLI4 device.
         */
        if (pci_resource_start(pdev, PCI_64BIT_BAR0)) {
                phba->pci_bar0_map = pci_resource_start(pdev, PCI_64BIT_BAR0);
                bar0map_len = pci_resource_len(pdev, PCI_64BIT_BAR0);

                /*
                 * Map SLI4 PCI Config Space Register base to a kernel virtual
                 * addr
                 */
                phba->sli4_hba.conf_regs_memmap_p =
                        ioremap(phba->pci_bar0_map, bar0map_len);
                if (!phba->sli4_hba.conf_regs_memmap_p) {
                        dev_printk(KERN_ERR, &pdev->dev,
                                   "ioremap failed for SLI4 PCI config "
                                   "registers.\n");
                        return -ENODEV;
                }
                phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p;
                /* Set up BAR0 PCI config space register memory map */
                lpfc_sli4_bar0_register_memmap(phba, if_type);
        } else {
                phba->pci_bar0_map = pci_resource_start(pdev, 1);
                bar0map_len = pci_resource_len(pdev, 1);
                if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
                        dev_printk(KERN_ERR, &pdev->dev,
                           "FATAL - No BAR0 mapping for SLI4, if_type 2\n");
                        return -ENODEV;
                }
                phba->sli4_hba.conf_regs_memmap_p =
                                ioremap(phba->pci_bar0_map, bar0map_len);
                if (!phba->sli4_hba.conf_regs_memmap_p) {
                        dev_printk(KERN_ERR, &pdev->dev,
                                "ioremap failed for SLI4 PCI config "
                                "registers.\n");
                        return -ENODEV;
                }
                lpfc_sli4_bar0_register_memmap(phba, if_type);
        }

        if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
                if (pci_resource_start(pdev, PCI_64BIT_BAR2)) {
                        /*
                         * Map SLI4 if type 0 HBA Control Register base to a
                         * kernel virtual address and setup the registers.
                         */
                        phba->pci_bar1_map = pci_resource_start(pdev,
                                                                PCI_64BIT_BAR2);
                        bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
                        phba->sli4_hba.ctrl_regs_memmap_p =
                                        ioremap(phba->pci_bar1_map,
                                                bar1map_len);
                        if (!phba->sli4_hba.ctrl_regs_memmap_p) {
                                dev_err(&pdev->dev,
                                           "ioremap failed for SLI4 HBA "
                                            "control registers.\n");
                                error = -ENOMEM;
                                goto out_iounmap_conf;
                        }
                        phba->pci_bar2_memmap_p =
                                         phba->sli4_hba.ctrl_regs_memmap_p;
                        lpfc_sli4_bar1_register_memmap(phba, if_type);
                } else {
                        error = -ENOMEM;
                        goto out_iounmap_conf;
                }
        }

        if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) &&
            (pci_resource_start(pdev, PCI_64BIT_BAR2))) {
                /*
                 * Map SLI4 if type 6 HBA Doorbell Register base to a kernel
                 * virtual address and setup the registers.
                 */
                phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2);
                bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2);
                phba->sli4_hba.drbl_regs_memmap_p =
                                ioremap(phba->pci_bar1_map, bar1map_len);
                if (!phba->sli4_hba.drbl_regs_memmap_p) {
                        dev_err(&pdev->dev,
                           "ioremap failed for SLI4 HBA doorbell registers.\n");
                        error = -ENOMEM;
                        goto out_iounmap_conf;
                }
                phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p;
                lpfc_sli4_bar1_register_memmap(phba, if_type);
        }

        if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
                if (pci_resource_start(pdev, PCI_64BIT_BAR4)) {
                        /*
                         * Map SLI4 if type 0 HBA Doorbell Register base to
                         * a kernel virtual address and setup the registers.
                         */
                        phba->pci_bar2_map = pci_resource_start(pdev,
                                                                PCI_64BIT_BAR4);
                        bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
                        phba->sli4_hba.drbl_regs_memmap_p =
                                        ioremap(phba->pci_bar2_map,
                                                bar2map_len);
                        if (!phba->sli4_hba.drbl_regs_memmap_p) {
                                dev_err(&pdev->dev,
                                           "ioremap failed for SLI4 HBA"
                                           " doorbell registers.\n");
                                error = -ENOMEM;
                                goto out_iounmap_ctrl;
                        }
                        phba->pci_bar4_memmap_p =
                                        phba->sli4_hba.drbl_regs_memmap_p;
                        error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
                        if (error)
                                goto out_iounmap_all;
                } else {
                        error = -ENOMEM;
                        goto out_iounmap_ctrl;
                }
        }

        if (if_type == LPFC_SLI_INTF_IF_TYPE_6 &&
            pci_resource_start(pdev, PCI_64BIT_BAR4)) {
                /*
                 * Map SLI4 if type 6 HBA DPP Register base to a kernel
                 * virtual address and setup the registers.
                 */
                phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4);
                bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4);
                phba->sli4_hba.dpp_regs_memmap_p =
                                ioremap(phba->pci_bar2_map, bar2map_len);
                if (!phba->sli4_hba.dpp_regs_memmap_p) {
                        dev_err(&pdev->dev,
                           "ioremap failed for SLI4 HBA dpp registers.\n");
                        error = -ENOMEM;
                        goto out_iounmap_all;
                }
                phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p;
        }

        /* Set up the EQ/CQ register handeling functions now */
        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
        case LPFC_SLI_INTF_IF_TYPE_2:
                phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr;
                phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_write_eq_db;
                phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_write_cq_db;
                break;
        case LPFC_SLI_INTF_IF_TYPE_6:
                phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_if6_eq_clr_intr;
                phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_if6_write_eq_db;
                phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_if6_write_cq_db;
                break;
        default:
                break;
        }

        return 0;

out_iounmap_all:
        if (phba->sli4_hba.drbl_regs_memmap_p)
                iounmap(phba->sli4_hba.drbl_regs_memmap_p);
out_iounmap_ctrl:
        if (phba->sli4_hba.ctrl_regs_memmap_p)
                iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
out_iounmap_conf:
        iounmap(phba->sli4_hba.conf_regs_memmap_p);

        return error;
}

/**
 * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the PCI device memory space for device
 * with SLI-4 interface spec.
 **/
static void
lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
{
        uint32_t if_type;
        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);

        switch (if_type) {
        case LPFC_SLI_INTF_IF_TYPE_0:
                iounmap(phba->sli4_hba.drbl_regs_memmap_p);
                iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
                iounmap(phba->sli4_hba.conf_regs_memmap_p);
                break;
        case LPFC_SLI_INTF_IF_TYPE_2:
                iounmap(phba->sli4_hba.conf_regs_memmap_p);
                break;
        case LPFC_SLI_INTF_IF_TYPE_6:
                iounmap(phba->sli4_hba.drbl_regs_memmap_p);
                iounmap(phba->sli4_hba.conf_regs_memmap_p);
                if (phba->sli4_hba.dpp_regs_memmap_p)
                        iounmap(phba->sli4_hba.dpp_regs_memmap_p);
                break;
        case LPFC_SLI_INTF_IF_TYPE_1:
                break;
        default:
                dev_printk(KERN_ERR, &phba->pcidev->dev,
                           "FATAL - unsupported SLI4 interface type - %d\n",
                           if_type);
                break;
        }
}

/**
 * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI-X interrupt vectors to device
 * with SLI-3 interface specs.
 *
 * Return codes
 *   0 - successful
 *   other values - error
 **/
static int
lpfc_sli_enable_msix(struct lpfc_hba *phba)
{
        int rc;
        LPFC_MBOXQ_t *pmb;

        /* Set up MSI-X multi-message vectors */
        rc = pci_alloc_irq_vectors(phba->pcidev,
                        LPFC_MSIX_VECTORS, LPFC_MSIX_VECTORS, PCI_IRQ_MSIX);
        if (rc < 0) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0420 PCI enable MSI-X failed (%d)\n", rc);
                goto vec_fail_out;
        }

        /*
         * Assign MSI-X vectors to interrupt handlers
         */

        /* vector-0 is associated to slow-path handler */
        rc = request_irq(pci_irq_vector(phba->pcidev, 0),
                         &lpfc_sli_sp_intr_handler, 0,
                         LPFC_SP_DRIVER_HANDLER_NAME, phba);
        if (rc) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0421 MSI-X slow-path request_irq failed "
                                "(%d)\n", rc);
                goto msi_fail_out;
        }

        /* vector-1 is associated to fast-path handler */
        rc = request_irq(pci_irq_vector(phba->pcidev, 1),
                         &lpfc_sli_fp_intr_handler, 0,
                         LPFC_FP_DRIVER_HANDLER_NAME, phba);

        if (rc) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0429 MSI-X fast-path request_irq failed "
                                "(%d)\n", rc);
                goto irq_fail_out;
        }

        /*
         * Configure HBA MSI-X attention conditions to messages
         */
        pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);

        if (!pmb) {
                rc = -ENOMEM;
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0474 Unable to allocate memory for issuing "
                                "MBOX_CONFIG_MSI command\n");
                goto mem_fail_out;
        }
        rc = lpfc_config_msi(phba, pmb);
        if (rc)
                goto mbx_fail_out;
        rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
        if (rc != MBX_SUCCESS) {
                lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
                                "0351 Config MSI mailbox command failed, "
                                "mbxCmd x%x, mbxStatus x%x\n",
                                pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
                goto mbx_fail_out;
        }

        /* Free memory allocated for mailbox command */
        mempool_free(pmb, phba->mbox_mem_pool);
        return rc;

mbx_fail_out:
        /* Free memory allocated for mailbox command */
        mempool_free(pmb, phba->mbox_mem_pool);

mem_fail_out:
        /* free the irq already requested */
        free_irq(pci_irq_vector(phba->pcidev, 1), phba);

irq_fail_out:
        /* free the irq already requested */
        free_irq(pci_irq_vector(phba->pcidev, 0), phba);

msi_fail_out:
        /* Unconfigure MSI-X capability structure */
        pci_free_irq_vectors(phba->pcidev);

vec_fail_out:
        return rc;
}

/**
 * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI interrupt mode to device with
 * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
 * enable the MSI vector. The device driver is responsible for calling the
 * request_irq() to register MSI vector with a interrupt the handler, which
 * is done in this function.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 */
static int
lpfc_sli_enable_msi(struct lpfc_hba *phba)
{
        int rc;

        rc = pci_enable_msi(phba->pcidev);
        if (!rc)
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0012 PCI enable MSI mode success.\n");
        else {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0471 PCI enable MSI mode failed (%d)\n", rc);
                return rc;
        }

        rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
                         0, LPFC_DRIVER_NAME, phba);
        if (rc) {
                pci_disable_msi(phba->pcidev);
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0478 MSI request_irq failed (%d)\n", rc);
        }
        return rc;
}

/**
 * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X).
 *
 * This routine is invoked to enable device interrupt and associate driver's
 * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
 * spec. Depends on the interrupt mode configured to the driver, the driver
 * will try to fallback from the configured interrupt mode to an interrupt
 * mode which is supported by the platform, kernel, and device in the order
 * of:
 * MSI-X -> MSI -> IRQ.
 *
 * Return codes
 *   0 - successful
 *   other values - error
 **/
static uint32_t
lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
        uint32_t intr_mode = LPFC_INTR_ERROR;
        int retval;

        /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
        retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
        if (retval)
                return intr_mode;
        phba->hba_flag &= ~HBA_NEEDS_CFG_PORT;

        if (cfg_mode == 2) {
                /* Now, try to enable MSI-X interrupt mode */
                retval = lpfc_sli_enable_msix(phba);
                if (!retval) {
                        /* Indicate initialization to MSI-X mode */
                        phba->intr_type = MSIX;
                        intr_mode = 2;
                }
        }

        /* Fallback to MSI if MSI-X initialization failed */
        if (cfg_mode >= 1 && phba->intr_type == NONE) {
                retval = lpfc_sli_enable_msi(phba);
                if (!retval) {
                        /* Indicate initialization to MSI mode */
                        phba->intr_type = MSI;
                        intr_mode = 1;
                }
        }

        /* Fallback to INTx if both MSI-X/MSI initalization failed */
        if (phba->intr_type == NONE) {
                retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
                                     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
                if (!retval) {
                        /* Indicate initialization to INTx mode */
                        phba->intr_type = INTx;
                        intr_mode = 0;
                }
        }
        return intr_mode;
}

/**
 * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable device interrupt and disassociate the
 * driver's interrupt handler(s) from interrupt vector(s) to device with
 * SLI-3 interface spec. Depending on the interrupt mode, the driver will
 * release the interrupt vector(s) for the message signaled interrupt.
 **/
static void
lpfc_sli_disable_intr(struct lpfc_hba *phba)
{
        int nr_irqs, i;

        if (phba->intr_type == MSIX)
                nr_irqs = LPFC_MSIX_VECTORS;
        else
                nr_irqs = 1;

        for (i = 0; i < nr_irqs; i++)
                free_irq(pci_irq_vector(phba->pcidev, i), phba);
        pci_free_irq_vectors(phba->pcidev);

        /* Reset interrupt management states */
        phba->intr_type = NONE;
        phba->sli.slistat.sli_intr = 0;
}

/**
 * lpfc_find_cpu_handle - Find the CPU that corresponds to the specified Queue
 * @phba: pointer to lpfc hba data structure.
 * @id: EQ vector index or Hardware Queue index
 * @match: LPFC_FIND_BY_EQ = match by EQ
 *         LPFC_FIND_BY_HDWQ = match by Hardware Queue
 * Return the CPU that matches the selection criteria
 */
static uint16_t
lpfc_find_cpu_handle(struct lpfc_hba *phba, uint16_t id, int match)
{
        struct lpfc_vector_map_info *cpup;
        int cpu;

        /* Loop through all CPUs */
        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* If we are matching by EQ, there may be multiple CPUs using
                 * using the same vector, so select the one with
                 * LPFC_CPU_FIRST_IRQ set.
                 */
                if ((match == LPFC_FIND_BY_EQ) &&
                    (cpup->flag & LPFC_CPU_FIRST_IRQ) &&
                    (cpup->eq == id))
                        return cpu;

                /* If matching by HDWQ, select the first CPU that matches */
                if ((match == LPFC_FIND_BY_HDWQ) && (cpup->hdwq == id))
                        return cpu;
        }
        return 0;
}

#ifdef CONFIG_X86
/**
 * lpfc_find_hyper - Determine if the CPU map entry is hyper-threaded
 * @phba: pointer to lpfc hba data structure.
 * @cpu: CPU map index
 * @phys_id: CPU package physical id
 * @core_id: CPU core id
 */
static int
lpfc_find_hyper(struct lpfc_hba *phba, int cpu,
                uint16_t phys_id, uint16_t core_id)
{
        struct lpfc_vector_map_info *cpup;
        int idx;

        for_each_present_cpu(idx) {
                cpup = &phba->sli4_hba.cpu_map[idx];
                /* Does the cpup match the one we are looking for */
                if ((cpup->phys_id == phys_id) &&
                    (cpup->core_id == core_id) &&
                    (cpu != idx))
                        return 1;
        }
        return 0;
}
#endif

/*
 * lpfc_assign_eq_map_info - Assigns eq for vector_map structure
 * @phba: pointer to lpfc hba data structure.
 * @eqidx: index for eq and irq vector
 * @flag: flags to set for vector_map structure
 * @cpu: cpu used to index vector_map structure
 *
 * The routine assigns eq info into vector_map structure
 */
static inline void
lpfc_assign_eq_map_info(struct lpfc_hba *phba, uint16_t eqidx, uint16_t flag,
                        unsigned int cpu)
{
        struct lpfc_vector_map_info *cpup = &phba->sli4_hba.cpu_map[cpu];
        struct lpfc_hba_eq_hdl *eqhdl = lpfc_get_eq_hdl(eqidx);

        cpup->eq = eqidx;
        cpup->flag |= flag;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "3336 Set Affinity: CPU %d irq %d eq %d flag x%x\n",
                        cpu, eqhdl->irq, cpup->eq, cpup->flag);
}

/**
 * lpfc_cpu_map_array_init - Initialize cpu_map structure
 * @phba: pointer to lpfc hba data structure.
 *
 * The routine initializes the cpu_map array structure
 */
static void
lpfc_cpu_map_array_init(struct lpfc_hba *phba)
{
        struct lpfc_vector_map_info *cpup;
        struct lpfc_eq_intr_info *eqi;
        int cpu;

        for_each_possible_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];
                cpup->phys_id = LPFC_VECTOR_MAP_EMPTY;
                cpup->core_id = LPFC_VECTOR_MAP_EMPTY;
                cpup->hdwq = LPFC_VECTOR_MAP_EMPTY;
                cpup->eq = LPFC_VECTOR_MAP_EMPTY;
                cpup->flag = 0;
                eqi = per_cpu_ptr(phba->sli4_hba.eq_info, cpu);
                INIT_LIST_HEAD(&eqi->list);
                eqi->icnt = 0;
        }
}

/**
 * lpfc_hba_eq_hdl_array_init - Initialize hba_eq_hdl structure
 * @phba: pointer to lpfc hba data structure.
 *
 * The routine initializes the hba_eq_hdl array structure
 */
static void
lpfc_hba_eq_hdl_array_init(struct lpfc_hba *phba)
{
        struct lpfc_hba_eq_hdl *eqhdl;
        int i;

        for (i = 0; i < phba->cfg_irq_chann; i++) {
                eqhdl = lpfc_get_eq_hdl(i);
                eqhdl->irq = LPFC_IRQ_EMPTY;
                eqhdl->phba = phba;
        }
}

/**
 * lpfc_cpu_affinity_check - Check vector CPU affinity mappings
 * @phba: pointer to lpfc hba data structure.
 * @vectors: number of msix vectors allocated.
 *
 * The routine will figure out the CPU affinity assignment for every
 * MSI-X vector allocated for the HBA.
 * In addition, the CPU to IO channel mapping will be calculated
 * and the phba->sli4_hba.cpu_map array will reflect this.
 */
static void
lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
{
        int i, cpu, idx, next_idx, new_cpu, start_cpu, first_cpu;
        int max_phys_id, min_phys_id;
        int max_core_id, min_core_id;
        struct lpfc_vector_map_info *cpup;
        struct lpfc_vector_map_info *new_cpup;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_hdwq_stat *c_stat;
#endif

        max_phys_id = 0;
        min_phys_id = LPFC_VECTOR_MAP_EMPTY;
        max_core_id = 0;
        min_core_id = LPFC_VECTOR_MAP_EMPTY;

        /* Update CPU map with physical id and core id of each CPU */
        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];
#ifdef CONFIG_X86
                cpup->phys_id = topology_physical_package_id(cpu);
                cpup->core_id = topology_core_id(cpu);
                if (lpfc_find_hyper(phba, cpu, cpup->phys_id, cpup->core_id))
                        cpup->flag |= LPFC_CPU_MAP_HYPER;
#else
                /* No distinction between CPUs for other platforms */
                cpup->phys_id = 0;
                cpup->core_id = cpu;
#endif

                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "3328 CPU %d physid %d coreid %d flag x%x\n",
                                cpu, cpup->phys_id, cpup->core_id, cpup->flag);

                if (cpup->phys_id > max_phys_id)
                        max_phys_id = cpup->phys_id;
                if (cpup->phys_id < min_phys_id)
                        min_phys_id = cpup->phys_id;

                if (cpup->core_id > max_core_id)
                        max_core_id = cpup->core_id;
                if (cpup->core_id < min_core_id)
                        min_core_id = cpup->core_id;
        }

        /* After looking at each irq vector assigned to this pcidev, its
         * possible to see that not ALL CPUs have been accounted for.
         * Next we will set any unassigned (unaffinitized) cpu map
         * entries to a IRQ on the same phys_id.
         */
        first_cpu = cpumask_first(cpu_present_mask);
        start_cpu = first_cpu;

        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* Is this CPU entry unassigned */
                if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
                        /* Mark CPU as IRQ not assigned by the kernel */
                        cpup->flag |= LPFC_CPU_MAP_UNASSIGN;

                        /* If so, find a new_cpup that is on the SAME
                         * phys_id as cpup. start_cpu will start where we
                         * left off so all unassigned entries don't get assgined
                         * the IRQ of the first entry.
                         */
                        new_cpu = start_cpu;
                        for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
                                new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
                                if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) &&
                                    (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY) &&
                                    (new_cpup->phys_id == cpup->phys_id))
                                        goto found_same;
                                new_cpu = lpfc_next_present_cpu(new_cpu);
                        }
                        /* At this point, we leave the CPU as unassigned */
                        continue;
found_same:
                        /* We found a matching phys_id, so copy the IRQ info */
                        cpup->eq = new_cpup->eq;

                        /* Bump start_cpu to the next slot to minmize the
                         * chance of having multiple unassigned CPU entries
                         * selecting the same IRQ.
                         */
                        start_cpu = lpfc_next_present_cpu(new_cpu);

                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "3337 Set Affinity: CPU %d "
                                        "eq %d from peer cpu %d same "
                                        "phys_id (%d)\n",
                                        cpu, cpup->eq, new_cpu,
                                        cpup->phys_id);
                }
        }

        /* Set any unassigned cpu map entries to a IRQ on any phys_id */
        start_cpu = first_cpu;

        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* Is this entry unassigned */
                if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
                        /* Mark it as IRQ not assigned by the kernel */
                        cpup->flag |= LPFC_CPU_MAP_UNASSIGN;

                        /* If so, find a new_cpup thats on ANY phys_id
                         * as the cpup. start_cpu will start where we
                         * left off so all unassigned entries don't get
                         * assigned the IRQ of the first entry.
                         */
                        new_cpu = start_cpu;
                        for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
                                new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
                                if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) &&
                                    (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY))
                                        goto found_any;
                                new_cpu = lpfc_next_present_cpu(new_cpu);
                        }
                        /* We should never leave an entry unassigned */
                        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                        "3339 Set Affinity: CPU %d "
                                        "eq %d UNASSIGNED\n",
                                        cpup->hdwq, cpup->eq);
                        continue;
found_any:
                        /* We found an available entry, copy the IRQ info */
                        cpup->eq = new_cpup->eq;

                        /* Bump start_cpu to the next slot to minmize the
                         * chance of having multiple unassigned CPU entries
                         * selecting the same IRQ.
                         */
                        start_cpu = lpfc_next_present_cpu(new_cpu);

                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "3338 Set Affinity: CPU %d "
                                        "eq %d from peer cpu %d (%d/%d)\n",
                                        cpu, cpup->eq, new_cpu,
                                        new_cpup->phys_id, new_cpup->core_id);
                }
        }

        /* Assign hdwq indices that are unique across all cpus in the map
         * that are also FIRST_CPUs.
         */
        idx = 0;
        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* Only FIRST IRQs get a hdwq index assignment. */
                if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
                        continue;

                /* 1 to 1, the first LPFC_CPU_FIRST_IRQ cpus to a unique hdwq */
                cpup->hdwq = idx;
                idx++;
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "3333 Set Affinity: CPU %d (phys %d core %d): "
                                "hdwq %d eq %d flg x%x\n",
                                cpu, cpup->phys_id, cpup->core_id,
                                cpup->hdwq, cpup->eq, cpup->flag);
        }
        /* Associate a hdwq with each cpu_map entry
         * This will be 1 to 1 - hdwq to cpu, unless there are less
         * hardware queues then CPUs. For that case we will just round-robin
         * the available hardware queues as they get assigned to CPUs.
         * The next_idx is the idx from the FIRST_CPU loop above to account
         * for irq_chann < hdwq.  The idx is used for round-robin assignments
         * and needs to start at 0.
         */
        next_idx = idx;
        start_cpu = 0;
        idx = 0;
        for_each_present_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];

                /* FIRST cpus are already mapped. */
                if (cpup->flag & LPFC_CPU_FIRST_IRQ)
                        continue;

                /* If the cfg_irq_chann < cfg_hdw_queue, set the hdwq
                 * of the unassigned cpus to the next idx so that all
                 * hdw queues are fully utilized.
                 */
                if (next_idx < phba->cfg_hdw_queue) {
                        cpup->hdwq = next_idx;
                        next_idx++;
                        continue;
                }

                /* Not a First CPU and all hdw_queues are used.  Reuse a
                 * Hardware Queue for another CPU, so be smart about it
                 * and pick one that has its IRQ/EQ mapped to the same phys_id
                 * (CPU package) and core_id.
                 */
                new_cpu = start_cpu;
                for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
                        new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
                        if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY &&
                            new_cpup->phys_id == cpup->phys_id &&
                            new_cpup->core_id == cpup->core_id) {
                                goto found_hdwq;
                        }
                        new_cpu = lpfc_next_present_cpu(new_cpu);
                }

                /* If we can't match both phys_id and core_id,
                 * settle for just a phys_id match.
                 */
                new_cpu = start_cpu;
                for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
                        new_cpup = &phba->sli4_hba.cpu_map[new_cpu];
                        if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY &&
                            new_cpup->phys_id == cpup->phys_id)
                                goto found_hdwq;
                        new_cpu = lpfc_next_present_cpu(new_cpu);
                }

                /* Otherwise just round robin on cfg_hdw_queue */
                cpup->hdwq = idx % phba->cfg_hdw_queue;
                idx++;
                goto logit;
 found_hdwq:
                /* We found an available entry, copy the IRQ info */
                start_cpu = lpfc_next_present_cpu(new_cpu);
                cpup->hdwq = new_cpup->hdwq;
 logit:
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "3335 Set Affinity: CPU %d (phys %d core %d): "
                                "hdwq %d eq %d flg x%x\n",
                                cpu, cpup->phys_id, cpup->core_id,
                                cpup->hdwq, cpup->eq, cpup->flag);
        }

        /*
         * Initialize the cpu_map slots for not-present cpus in case
         * a cpu is hot-added. Perform a simple hdwq round robin assignment.
         */
        idx = 0;
        for_each_possible_cpu(cpu) {
                cpup = &phba->sli4_hba.cpu_map[cpu];
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
                c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, cpu);
                c_stat->hdwq_no = cpup->hdwq;
#endif
                if (cpup->hdwq != LPFC_VECTOR_MAP_EMPTY)
                        continue;

                cpup->hdwq = idx++ % phba->cfg_hdw_queue;
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
                c_stat->hdwq_no = cpup->hdwq;
#endif
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "3340 Set Affinity: not present "
                                "CPU %d hdwq %d\n",
                                cpu, cpup->hdwq);
        }

        /* The cpu_map array will be used later during initialization
         * when EQ / CQ / WQs are allocated and configured.
         */
        return;
}

/**
 * lpfc_cpuhp_get_eq
 *
 * @phba:   pointer to lpfc hba data structure.
 * @cpu:    cpu going offline
 * @eqlist: eq list to append to
 */
static int
lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu,
                  struct list_head *eqlist)
{
        const struct cpumask *maskp;
        struct lpfc_queue *eq;
        struct cpumask *tmp;
        u16 idx;

        tmp = kzalloc(cpumask_size(), GFP_KERNEL);
        if (!tmp)
                return -ENOMEM;

        for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
                maskp = pci_irq_get_affinity(phba->pcidev, idx);
                if (!maskp)
                        continue;
                /*
                 * if irq is not affinitized to the cpu going
                 * then we don't need to poll the eq attached
                 * to it.
                 */
                if (!cpumask_and(tmp, maskp, cpumask_of(cpu)))
                        continue;
                /* get the cpus that are online and are affini-
                 * tized to this irq vector.  If the count is
                 * more than 1 then cpuhp is not going to shut-
                 * down this vector.  Since this cpu has not
                 * gone offline yet, we need >1.
                 */
                cpumask_and(tmp, maskp, cpu_online_mask);
                if (cpumask_weight(tmp) > 1)
                        continue;

                /* Now that we have an irq to shutdown, get the eq
                 * mapped to this irq.  Note: multiple hdwq's in
                 * the software can share an eq, but eventually
                 * only eq will be mapped to this vector
                 */
                eq = phba->sli4_hba.hba_eq_hdl[idx].eq;
                list_add(&eq->_poll_list, eqlist);
        }
        kfree(tmp);
        return 0;
}

static void __lpfc_cpuhp_remove(struct lpfc_hba *phba)
{
        if (phba->sli_rev != LPFC_SLI_REV4)
                return;

        cpuhp_state_remove_instance_nocalls(lpfc_cpuhp_state,
                                            &phba->cpuhp);
        /*
         * unregistering the instance doesn't stop the polling
         * timer. Wait for the poll timer to retire.
         */
        synchronize_rcu();
        del_timer_sync(&phba->cpuhp_poll_timer);
}

static void lpfc_cpuhp_remove(struct lpfc_hba *phba)
{
        if (phba->pport &&
            test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
                return;

        __lpfc_cpuhp_remove(phba);
}

static void lpfc_cpuhp_add(struct lpfc_hba *phba)
{
        if (phba->sli_rev != LPFC_SLI_REV4)
                return;

        rcu_read_lock();

        if (!list_empty(&phba->poll_list))
                mod_timer(&phba->cpuhp_poll_timer,
                          jiffies + msecs_to_jiffies(LPFC_POLL_HB));

        rcu_read_unlock();

        cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state,
                                         &phba->cpuhp);
}

static int __lpfc_cpuhp_checks(struct lpfc_hba *phba, int *retval)
{
        if (test_bit(FC_UNLOADING, &phba->pport->load_flag)) {
                *retval = -EAGAIN;
                return true;
        }

        if (phba->sli_rev != LPFC_SLI_REV4) {
                *retval = 0;
                return true;
        }

        /* proceed with the hotplug */
        return false;
}

/**
 * lpfc_irq_set_aff - set IRQ affinity
 * @eqhdl: EQ handle
 * @cpu: cpu to set affinity
 *
 **/
static inline void
lpfc_irq_set_aff(struct lpfc_hba_eq_hdl *eqhdl, unsigned int cpu)
{
        cpumask_clear(&eqhdl->aff_mask);
        cpumask_set_cpu(cpu, &eqhdl->aff_mask);
        irq_set_status_flags(eqhdl->irq, IRQ_NO_BALANCING);
        irq_set_affinity(eqhdl->irq, &eqhdl->aff_mask);
}

/**
 * lpfc_irq_clear_aff - clear IRQ affinity
 * @eqhdl: EQ handle
 *
 **/
static inline void
lpfc_irq_clear_aff(struct lpfc_hba_eq_hdl *eqhdl)
{
        cpumask_clear(&eqhdl->aff_mask);
        irq_clear_status_flags(eqhdl->irq, IRQ_NO_BALANCING);
}

/**
 * lpfc_irq_rebalance - rebalances IRQ affinity according to cpuhp event
 * @phba: pointer to HBA context object.
 * @cpu: cpu going offline/online
 * @offline: true, cpu is going offline. false, cpu is coming online.
 *
 * If cpu is going offline, we'll try our best effort to find the next
 * online cpu on the phba's original_mask and migrate all offlining IRQ
 * affinities.
 *
 * If cpu is coming online, reaffinitize the IRQ back to the onlining cpu.
 *
 * Note: Call only if NUMA or NHT mode is enabled, otherwise rely on
 *       PCI_IRQ_AFFINITY to auto-manage IRQ affinity.
 *
 **/
static void
lpfc_irq_rebalance(struct lpfc_hba *phba, unsigned int cpu, bool offline)
{
        struct lpfc_vector_map_info *cpup;
        struct cpumask *aff_mask;
        unsigned int cpu_select, cpu_next, idx;
        const struct cpumask *orig_mask;

        if (phba->irq_chann_mode == NORMAL_MODE)
                return;

        orig_mask = &phba->sli4_hba.irq_aff_mask;

        if (!cpumask_test_cpu(cpu, orig_mask))
                return;

        cpup = &phba->sli4_hba.cpu_map[cpu];

        if (!(cpup->flag & LPFC_CPU_FIRST_IRQ))
                return;

        if (offline) {
                /* Find next online CPU on original mask */
                cpu_next = cpumask_next_wrap(cpu, orig_mask, cpu, true);
                cpu_select = lpfc_next_online_cpu(orig_mask, cpu_next);

                /* Found a valid CPU */
                if ((cpu_select < nr_cpu_ids) && (cpu_select != cpu)) {
                        /* Go through each eqhdl and ensure offlining
                         * cpu aff_mask is migrated
                         */
                        for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
                                aff_mask = lpfc_get_aff_mask(idx);

                                /* Migrate affinity */
                                if (cpumask_test_cpu(cpu, aff_mask))
                                        lpfc_irq_set_aff(lpfc_get_eq_hdl(idx),
                                                         cpu_select);
                        }
                } else {
                        /* Rely on irqbalance if no online CPUs left on NUMA */
                        for (idx = 0; idx < phba->cfg_irq_chann; idx++)
                                lpfc_irq_clear_aff(lpfc_get_eq_hdl(idx));
                }
        } else {
                /* Migrate affinity back to this CPU */
                lpfc_irq_set_aff(lpfc_get_eq_hdl(cpup->eq), cpu);
        }
}

static int lpfc_cpu_offline(unsigned int cpu, struct hlist_node *node)
{
        struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp);
        struct lpfc_queue *eq, *next;
        LIST_HEAD(eqlist);
        int retval;

        if (!phba) {
                WARN_ONCE(!phba, "cpu: %u. phba:NULL", raw_smp_processor_id());
                return 0;
        }

        if (__lpfc_cpuhp_checks(phba, &retval))
                return retval;

        lpfc_irq_rebalance(phba, cpu, true);

        retval = lpfc_cpuhp_get_eq(phba, cpu, &eqlist);
        if (retval)
                return retval;

        /* start polling on these eq's */
        list_for_each_entry_safe(eq, next, &eqlist, _poll_list) {
                list_del_init(&eq->_poll_list);
                lpfc_sli4_start_polling(eq);
        }

        return 0;
}

static int lpfc_cpu_online(unsigned int cpu, struct hlist_node *node)
{
        struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp);
        struct lpfc_queue *eq, *next;
        unsigned int n;
        int retval;

        if (!phba) {
                WARN_ONCE(!phba, "cpu: %u. phba:NULL", raw_smp_processor_id());
                return 0;
        }

        if (__lpfc_cpuhp_checks(phba, &retval))
                return retval;

        lpfc_irq_rebalance(phba, cpu, false);

        list_for_each_entry_safe(eq, next, &phba->poll_list, _poll_list) {
                n = lpfc_find_cpu_handle(phba, eq->hdwq, LPFC_FIND_BY_HDWQ);
                if (n == cpu)
                        lpfc_sli4_stop_polling(eq);
        }

        return 0;
}

/**
 * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI-X interrupt vectors to device
 * with SLI-4 interface spec.  It also allocates MSI-X vectors and maps them
 * to cpus on the system.
 *
 * When cfg_irq_numa is enabled, the adapter will only allocate vectors for
 * the number of cpus on the same numa node as this adapter.  The vectors are
 * allocated without requesting OS affinity mapping.  A vector will be
 * allocated and assigned to each online and offline cpu.  If the cpu is
 * online, then affinity will be set to that cpu.  If the cpu is offline, then
 * affinity will be set to the nearest peer cpu within the numa node that is
 * online.  If there are no online cpus within the numa node, affinity is not
 * assigned and the OS may do as it pleases. Note: cpu vector affinity mapping
 * is consistent with the way cpu online/offline is handled when cfg_irq_numa is
 * configured.
 *
 * If numa mode is not enabled and there is more than 1 vector allocated, then
 * the driver relies on the managed irq interface where the OS assigns vector to
 * cpu affinity.  The driver will then use that affinity mapping to setup its
 * cpu mapping table.
 *
 * Return codes
 * 0 - successful
 * other values - error
 **/
static int
lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
        int vectors, rc, index;
        char *name;
        const struct cpumask *aff_mask = NULL;
        unsigned int cpu = 0, cpu_cnt = 0, cpu_select = nr_cpu_ids;
        struct lpfc_vector_map_info *cpup;
        struct lpfc_hba_eq_hdl *eqhdl;
        const struct cpumask *maskp;
        unsigned int flags = PCI_IRQ_MSIX;

        /* Set up MSI-X multi-message vectors */
        vectors = phba->cfg_irq_chann;

        if (phba->irq_chann_mode != NORMAL_MODE)
                aff_mask = &phba->sli4_hba.irq_aff_mask;

        if (aff_mask) {
                cpu_cnt = cpumask_weight(aff_mask);
                vectors = min(phba->cfg_irq_chann, cpu_cnt);

                /* cpu: iterates over aff_mask including offline or online
                 * cpu_select: iterates over online aff_mask to set affinity
                 */
                cpu = cpumask_first(aff_mask);
                cpu_select = lpfc_next_online_cpu(aff_mask, cpu);
        } else {
                flags |= PCI_IRQ_AFFINITY;
        }

        rc = pci_alloc_irq_vectors(phba->pcidev, 1, vectors, flags);
        if (rc < 0) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0484 PCI enable MSI-X failed (%d)\n", rc);
                goto vec_fail_out;
        }
        vectors = rc;

        /* Assign MSI-X vectors to interrupt handlers */
        for (index = 0; index < vectors; index++) {
                eqhdl = lpfc_get_eq_hdl(index);
                name = eqhdl->handler_name;
                memset(name, 0, LPFC_SLI4_HANDLER_NAME_SZ);
                snprintf(name, LPFC_SLI4_HANDLER_NAME_SZ,
                         LPFC_DRIVER_HANDLER_NAME"%d", index);

                eqhdl->idx = index;
                rc = pci_irq_vector(phba->pcidev, index);
                if (rc < 0) {
                        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                        "0489 MSI-X fast-path (%d) "
                                        "pci_irq_vec failed (%d)\n", index, rc);
                        goto cfg_fail_out;
                }
                eqhdl->irq = rc;

                rc = request_threaded_irq(eqhdl->irq,
                                          &lpfc_sli4_hba_intr_handler,
                                          &lpfc_sli4_hba_intr_handler_th,
                                          IRQF_ONESHOT, name, eqhdl);
                if (rc) {
                        lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                        "0486 MSI-X fast-path (%d) "
                                        "request_irq failed (%d)\n", index, rc);
                        goto cfg_fail_out;
                }

                if (aff_mask) {
                        /* If found a neighboring online cpu, set affinity */
                        if (cpu_select < nr_cpu_ids)
                                lpfc_irq_set_aff(eqhdl, cpu_select);

                        /* Assign EQ to cpu_map */
                        lpfc_assign_eq_map_info(phba, index,
                                                LPFC_CPU_FIRST_IRQ,
                                                cpu);

                        /* Iterate to next offline or online cpu in aff_mask */
                        cpu = cpumask_next(cpu, aff_mask);

                        /* Find next online cpu in aff_mask to set affinity */
                        cpu_select = lpfc_next_online_cpu(aff_mask, cpu);
                } else if (vectors == 1) {
                        cpu = cpumask_first(cpu_present_mask);
                        lpfc_assign_eq_map_info(phba, index, LPFC_CPU_FIRST_IRQ,
                                                cpu);
                } else {
                        maskp = pci_irq_get_affinity(phba->pcidev, index);

                        /* Loop through all CPUs associated with vector index */
                        for_each_cpu_and(cpu, maskp, cpu_present_mask) {
                                cpup = &phba->sli4_hba.cpu_map[cpu];

                                /* If this is the first CPU thats assigned to
                                 * this vector, set LPFC_CPU_FIRST_IRQ.
                                 *
                                 * With certain platforms its possible that irq
                                 * vectors are affinitized to all the cpu's.
                                 * This can result in each cpu_map.eq to be set
                                 * to the last vector, resulting in overwrite
                                 * of all the previous cpu_map.eq.  Ensure that
                                 * each vector receives a place in cpu_map.
                                 * Later call to lpfc_cpu_affinity_check will
                                 * ensure we are nicely balanced out.
                                 */
                                if (cpup->eq != LPFC_VECTOR_MAP_EMPTY)
                                        continue;
                                lpfc_assign_eq_map_info(phba, index,
                                                        LPFC_CPU_FIRST_IRQ,
                                                        cpu);
                                break;
                        }
                }
        }

        if (vectors != phba->cfg_irq_chann) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3238 Reducing IO channels to match number of "
                                "MSI-X vectors, requested %d got %d\n",
                                phba->cfg_irq_chann, vectors);
                if (phba->cfg_irq_chann > vectors)
                        phba->cfg_irq_chann = vectors;
        }

        return rc;

cfg_fail_out:
        /* free the irq already requested */
        for (--index; index >= 0; index--) {
                eqhdl = lpfc_get_eq_hdl(index);
                lpfc_irq_clear_aff(eqhdl);
                free_irq(eqhdl->irq, eqhdl);
        }

        /* Unconfigure MSI-X capability structure */
        pci_free_irq_vectors(phba->pcidev);

vec_fail_out:
        return rc;
}

/**
 * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to enable the MSI interrupt mode to device with
 * SLI-4 interface spec. The kernel function pci_alloc_irq_vectors() is
 * called to enable the MSI vector. The device driver is responsible for
 * calling the request_irq() to register MSI vector with a interrupt the
 * handler, which is done in this function.
 *
 * Return codes
 *      0 - successful
 *      other values - error
 **/
static int
lpfc_sli4_enable_msi(struct lpfc_hba *phba)
{
        int rc, index;
        unsigned int cpu;
        struct lpfc_hba_eq_hdl *eqhdl;

        rc = pci_alloc_irq_vectors(phba->pcidev, 1, 1,
                                   PCI_IRQ_MSI | PCI_IRQ_AFFINITY);
        if (rc > 0)
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0487 PCI enable MSI mode success.\n");
        else {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "0488 PCI enable MSI mode failed (%d)\n", rc);
                return rc ? rc : -1;
        }

        rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
                         0, LPFC_DRIVER_NAME, phba);
        if (rc) {
                pci_free_irq_vectors(phba->pcidev);
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0490 MSI request_irq failed (%d)\n", rc);
                return rc;
        }

        eqhdl = lpfc_get_eq_hdl(0);
        rc = pci_irq_vector(phba->pcidev, 0);
        if (rc < 0) {
                pci_free_irq_vectors(phba->pcidev);
                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                "0496 MSI pci_irq_vec failed (%d)\n", rc);
                return rc;
        }
        eqhdl->irq = rc;

        cpu = cpumask_first(cpu_present_mask);
        lpfc_assign_eq_map_info(phba, 0, LPFC_CPU_FIRST_IRQ, cpu);

        for (index = 0; index < phba->cfg_irq_chann; index++) {
                eqhdl = lpfc_get_eq_hdl(index);
                eqhdl->idx = index;
        }

        return 0;
}

/**
 * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X).
 *
 * This routine is invoked to enable device interrupt and associate driver's
 * interrupt handler(s) to interrupt vector(s) to device with SLI-4
 * interface spec. Depends on the interrupt mode configured to the driver,
 * the driver will try to fallback from the configured interrupt mode to an
 * interrupt mode which is supported by the platform, kernel, and device in
 * the order of:
 * MSI-X -> MSI -> IRQ.
 *
 * Return codes
 *      Interrupt mode (2, 1, 0) - successful
 *      LPFC_INTR_ERROR - error
 **/
static uint32_t
lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
        uint32_t intr_mode = LPFC_INTR_ERROR;
        int retval, idx;

        if (cfg_mode == 2) {
                /* Preparation before conf_msi mbox cmd */
                retval = 0;
                if (!retval) {
                        /* Now, try to enable MSI-X interrupt mode */
                        retval = lpfc_sli4_enable_msix(phba);
                        if (!retval) {
                                /* Indicate initialization to MSI-X mode */
                                phba->intr_type = MSIX;
                                intr_mode = 2;
                        }
                }
        }

        /* Fallback to MSI if MSI-X initialization failed */
        if (cfg_mode >= 1 && phba->intr_type == NONE) {
                retval = lpfc_sli4_enable_msi(phba);
                if (!retval) {
                        /* Indicate initialization to MSI mode */
                        phba->intr_type = MSI;
                        intr_mode = 1;
                }
        }

        /* Fallback to INTx if both MSI-X/MSI initalization failed */
        if (phba->intr_type == NONE) {
                retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
                                     IRQF_SHARED, LPFC_DRIVER_NAME, phba);
                if (!retval) {
                        struct lpfc_hba_eq_hdl *eqhdl;
                        unsigned int cpu;

                        /* Indicate initialization to INTx mode */
                        phba->intr_type = INTx;
                        intr_mode = 0;

                        eqhdl = lpfc_get_eq_hdl(0);
                        retval = pci_irq_vector(phba->pcidev, 0);
                        if (retval < 0) {
                                lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
                                        "0502 INTR pci_irq_vec failed (%d)\n",
                                         retval);
                                return LPFC_INTR_ERROR;
                        }
                        eqhdl->irq = retval;

                        cpu = cpumask_first(cpu_present_mask);
                        lpfc_assign_eq_map_info(phba, 0, LPFC_CPU_FIRST_IRQ,
                                                cpu);
                        for (idx = 0; idx < phba->cfg_irq_chann; idx++) {
                                eqhdl = lpfc_get_eq_hdl(idx);
                                eqhdl->idx = idx;
                        }
                }
        }
        return intr_mode;
}

/**
 * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to disable device interrupt and disassociate
 * the driver's interrupt handler(s) from interrupt vector(s) to device
 * with SLI-4 interface spec. Depending on the interrupt mode, the driver
 * will release the interrupt vector(s) for the message signaled interrupt.
 **/
static void
lpfc_sli4_disable_intr(struct lpfc_hba *phba)
{
        /* Disable the currently initialized interrupt mode */
        if (phba->intr_type == MSIX) {
                int index;
                struct lpfc_hba_eq_hdl *eqhdl;

                /* Free up MSI-X multi-message vectors */
                for (index = 0; index < phba->cfg_irq_chann; index++) {
                        eqhdl = lpfc_get_eq_hdl(index);
                        lpfc_irq_clear_aff(eqhdl);
                        free_irq(eqhdl->irq, eqhdl);
                }
        } else {
                free_irq(phba->pcidev->irq, phba);
        }

        pci_free_irq_vectors(phba->pcidev);

        /* Reset interrupt management states */
        phba->intr_type = NONE;
        phba->sli.slistat.sli_intr = 0;
}

/**
 * lpfc_unset_hba - Unset SLI3 hba device initialization
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is invoked to unset the HBA device initialization steps to
 * a device with SLI-3 interface spec.
 **/
static void
lpfc_unset_hba(struct lpfc_hba *phba)
{
        set_bit(FC_UNLOADING, &phba->pport->load_flag);

        kfree(phba->vpi_bmask);
        kfree(phba->vpi_ids);

        lpfc_stop_hba_timers(phba);

        phba->pport->work_port_events = 0;

        lpfc_sli_hba_down(phba);

        lpfc_sli_brdrestart(phba);

        lpfc_sli_disable_intr(phba);

        return;
}

/**
 * lpfc_sli4_xri_exchange_busy_wait - Wait for device XRI exchange busy
 * @phba: Pointer to HBA context object.
 *
 * This function is called in the SLI4 code path to wait for completion
 * of device's XRIs exchange busy. It will check the XRI exchange busy
 * on outstanding FCP and ELS I/Os every 10ms for up to 10 seconds; after
 * that, it will check the XRI exchange busy on outstanding FCP and ELS
 * I/Os every 30 seconds, log error message, and wait forever. Only when
 * all XRI exchange busy complete, the driver unload shall proceed with
 * invoking the function reset ioctl mailbox command to the CNA and the
 * the rest of the driver unload resource release.
 **/
static void
lpfc_sli4_xri_exchange_busy_wait(struct lpfc_hba *phba)
{
        struct lpfc_sli4_hdw_queue *qp;
        int idx, ccnt;
        int wait_time = 0;
        int io_xri_cmpl = 1;
        int nvmet_xri_cmpl = 1;
        int els_xri_cmpl = list_empty(&phba->sli4_hba.lpfc_abts_els_sgl_list);

        /* Driver just aborted IOs during the hba_unset process.  Pause
         * here to give the HBA time to complete the IO and get entries
         * into the abts lists.
         */
        msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1 * 5);

        /* Wait for NVME pending IO to flush back to transport. */
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                lpfc_nvme_wait_for_io_drain(phba);

        ccnt = 0;
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                qp = &phba->sli4_hba.hdwq[idx];
                io_xri_cmpl = list_empty(&qp->lpfc_abts_io_buf_list);
                if (!io_xri_cmpl) /* if list is NOT empty */
                        ccnt++;
        }
        if (ccnt)
                io_xri_cmpl = 0;

        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                nvmet_xri_cmpl =
                        list_empty(&phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
        }

        while (!els_xri_cmpl || !io_xri_cmpl || !nvmet_xri_cmpl) {
                if (wait_time > LPFC_XRI_EXCH_BUSY_WAIT_TMO) {
                        if (!nvmet_xri_cmpl)
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6424 NVMET XRI exchange busy "
                                                "wait time: %d seconds.\n",
                                                wait_time/1000);
                        if (!io_xri_cmpl)
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6100 IO XRI exchange busy "
                                                "wait time: %d seconds.\n",
                                                wait_time/1000);
                        if (!els_xri_cmpl)
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "2878 ELS XRI exchange busy "
                                                "wait time: %d seconds.\n",
                                                wait_time/1000);
                        msleep(LPFC_XRI_EXCH_BUSY_WAIT_T2);
                        wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T2;
                } else {
                        msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1);
                        wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T1;
                }

                ccnt = 0;
                for (idx = 0; idx < phba->cfg_hdw_queue; idx++) {
                        qp = &phba->sli4_hba.hdwq[idx];
                        io_xri_cmpl = list_empty(
                            &qp->lpfc_abts_io_buf_list);
                        if (!io_xri_cmpl) /* if list is NOT empty */
                                ccnt++;
                }
                if (ccnt)
                        io_xri_cmpl = 0;

                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                        nvmet_xri_cmpl = list_empty(
                                &phba->sli4_hba.lpfc_abts_nvmet_ctx_list);
                }
                els_xri_cmpl =
                        list_empty(&phba->sli4_hba.lpfc_abts_els_sgl_list);

        }
}

/**
 * lpfc_sli4_hba_unset - Unset the fcoe hba
 * @phba: Pointer to HBA context object.
 *
 * This function is called in the SLI4 code path to reset the HBA's FCoE
 * function. The caller is not required to hold any lock. This routine
 * issues PCI function reset mailbox command to reset the FCoE function.
 * At the end of the function, it calls lpfc_hba_down_post function to
 * free any pending commands.
 **/
static void
lpfc_sli4_hba_unset(struct lpfc_hba *phba)
{
        int wait_cnt = 0;
        LPFC_MBOXQ_t *mboxq;
        struct pci_dev *pdev = phba->pcidev;

        lpfc_stop_hba_timers(phba);
        hrtimer_cancel(&phba->cmf_stats_timer);
        hrtimer_cancel(&phba->cmf_timer);

        if (phba->pport)
                phba->sli4_hba.intr_enable = 0;

        /*
         * Gracefully wait out the potential current outstanding asynchronous
         * mailbox command.
         */

        /* First, block any pending async mailbox command from posted */
        spin_lock_irq(&phba->hbalock);
        phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
        spin_unlock_irq(&phba->hbalock);
        /* Now, trying to wait it out if we can */
        while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
                msleep(10);
                if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
                        break;
        }
        /* Forcefully release the outstanding mailbox command if timed out */
        if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
                spin_lock_irq(&phba->hbalock);
                mboxq = phba->sli.mbox_active;
                mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
                __lpfc_mbox_cmpl_put(phba, mboxq);
                phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
                phba->sli.mbox_active = NULL;
                spin_unlock_irq(&phba->hbalock);
        }

        /* Abort all iocbs associated with the hba */
        lpfc_sli_hba_iocb_abort(phba);

        if (!pci_channel_offline(phba->pcidev))
                /* Wait for completion of device XRI exchange busy */
                lpfc_sli4_xri_exchange_busy_wait(phba);

        /* per-phba callback de-registration for hotplug event */
        if (phba->pport)
                lpfc_cpuhp_remove(phba);

        /* Disable PCI subsystem interrupt */
        lpfc_sli4_disable_intr(phba);

        /* Disable SR-IOV if enabled */
        if (phba->cfg_sriov_nr_virtfn)
                pci_disable_sriov(pdev);

        /* Stop kthread signal shall trigger work_done one more time */
        kthread_stop(phba->worker_thread);

        /* Disable FW logging to host memory */
        lpfc_ras_stop_fwlog(phba);

        /* Reset SLI4 HBA FCoE function */
        lpfc_pci_function_reset(phba);

        /* release all queue allocated resources. */
        lpfc_sli4_queue_destroy(phba);

        /* Free RAS DMA memory */
        if (phba->ras_fwlog.ras_enabled)
                lpfc_sli4_ras_dma_free(phba);

        /* Stop the SLI4 device port */
        if (phba->pport)
                phba->pport->work_port_events = 0;
}

static uint32_t
lpfc_cgn_crc32(uint32_t crc, u8 byte)
{
        uint32_t msb = 0;
        uint32_t bit;

        for (bit = 0; bit < 8; bit++) {
                msb = (crc >> 31) & 1;
                crc <<= 1;

                if (msb ^ (byte & 1)) {
                        crc ^= LPFC_CGN_CRC32_MAGIC_NUMBER;
                        crc |= 1;
                }
                byte >>= 1;
        }
        return crc;
}

static uint32_t
lpfc_cgn_reverse_bits(uint32_t wd)
{
        uint32_t result = 0;
        uint32_t i;

        for (i = 0; i < 32; i++) {
                result <<= 1;
                result |= (1 & (wd >> i));
        }
        return result;
}

/*
 * The routine corresponds with the algorithm the HBA firmware
 * uses to validate the data integrity.
 */
uint32_t
lpfc_cgn_calc_crc32(void *ptr, uint32_t byteLen, uint32_t crc)
{
        uint32_t  i;
        uint32_t result;
        uint8_t  *data = (uint8_t *)ptr;

        for (i = 0; i < byteLen; ++i)
                crc = lpfc_cgn_crc32(crc, data[i]);

        result = ~lpfc_cgn_reverse_bits(crc);
        return result;
}

void
lpfc_init_congestion_buf(struct lpfc_hba *phba)
{
        struct lpfc_cgn_info *cp;
        uint16_t size;
        uint32_t crc;

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "6235 INIT Congestion Buffer %p\n", phba->cgn_i);

        if (!phba->cgn_i)
                return;
        cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;

        atomic_set(&phba->cgn_fabric_warn_cnt, 0);
        atomic_set(&phba->cgn_fabric_alarm_cnt, 0);
        atomic_set(&phba->cgn_sync_alarm_cnt, 0);
        atomic_set(&phba->cgn_sync_warn_cnt, 0);

        atomic_set(&phba->cgn_driver_evt_cnt, 0);
        atomic_set(&phba->cgn_latency_evt_cnt, 0);
        atomic64_set(&phba->cgn_latency_evt, 0);
        phba->cgn_evt_minute = 0;

        memset(cp, 0xff, offsetof(struct lpfc_cgn_info, cgn_stat));
        cp->cgn_info_size = cpu_to_le16(LPFC_CGN_INFO_SZ);
        cp->cgn_info_version = LPFC_CGN_INFO_V4;

        /* cgn parameters */
        cp->cgn_info_mode = phba->cgn_p.cgn_param_mode;
        cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0;
        cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1;
        cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2;

        lpfc_cgn_update_tstamp(phba, &cp->base_time);

        /* Fill in default LUN qdepth */
        if (phba->pport) {
                size = (uint16_t)(phba->pport->cfg_lun_queue_depth);
                cp->cgn_lunq = cpu_to_le16(size);
        }

        /* last used Index initialized to 0xff already */

        cp->cgn_warn_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ);
        cp->cgn_alarm_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ);
        crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED);
        cp->cgn_info_crc = cpu_to_le32(crc);

        phba->cgn_evt_timestamp = jiffies +
                msecs_to_jiffies(LPFC_CGN_TIMER_TO_MIN);
}

void
lpfc_init_congestion_stat(struct lpfc_hba *phba)
{
        struct lpfc_cgn_info *cp;
        uint32_t crc;

        lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
                        "6236 INIT Congestion Stat %p\n", phba->cgn_i);

        if (!phba->cgn_i)
                return;

        cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;
        memset(&cp->cgn_stat, 0, sizeof(cp->cgn_stat));

        lpfc_cgn_update_tstamp(phba, &cp->stat_start);
        crc = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED);
        cp->cgn_info_crc = cpu_to_le32(crc);
}

/**
 * __lpfc_reg_congestion_buf - register congestion info buffer with HBA
 * @phba: Pointer to hba context object.
 * @reg: flag to determine register or unregister.
 */
static int
__lpfc_reg_congestion_buf(struct lpfc_hba *phba, int reg)
{
        struct lpfc_mbx_reg_congestion_buf *reg_congestion_buf;
        union  lpfc_sli4_cfg_shdr *shdr;
        uint32_t shdr_status, shdr_add_status;
        LPFC_MBOXQ_t *mboxq;
        int length, rc;

        if (!phba->cgn_i)
                return -ENXIO;

        mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
        if (!mboxq) {
                lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
                                "2641 REG_CONGESTION_BUF mbox allocation fail: "
                                "HBA state x%x reg %d\n",
                                phba->pport->port_state, reg);
                return -ENOMEM;
        }

        length = (sizeof(struct lpfc_mbx_reg_congestion_buf) -
                sizeof(struct lpfc_sli4_cfg_mhdr));
        lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
                         LPFC_MBOX_OPCODE_REG_CONGESTION_BUF, length,
                         LPFC_SLI4_MBX_EMBED);
        reg_congestion_buf = &mboxq->u.mqe.un.reg_congestion_buf;
        bf_set(lpfc_mbx_reg_cgn_buf_type, reg_congestion_buf, 1);
        if (reg > 0)
                bf_set(lpfc_mbx_reg_cgn_buf_cnt, reg_congestion_buf, 1);
        else
                bf_set(lpfc_mbx_reg_cgn_buf_cnt, reg_congestion_buf, 0);
        reg_congestion_buf->length = sizeof(struct lpfc_cgn_info);
        reg_congestion_buf->addr_lo =
                putPaddrLow(phba->cgn_i->phys);
        reg_congestion_buf->addr_hi =
                putPaddrHigh(phba->cgn_i->phys);

        rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
        shdr = (union lpfc_sli4_cfg_shdr *)
                &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
        shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
        shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
                                 &shdr->response);
        mempool_free(mboxq, phba->mbox_mem_pool);
        if (shdr_status || shdr_add_status || rc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "2642 REG_CONGESTION_BUF mailbox "
                                "failed with status x%x add_status x%x,"
                                " mbx status x%x reg %d\n",
                                shdr_status, shdr_add_status, rc, reg);
                return -ENXIO;
        }
        return 0;
}

int
lpfc_unreg_congestion_buf(struct lpfc_hba *phba)
{
        lpfc_cmf_stop(phba);
        return __lpfc_reg_congestion_buf(phba, 0);
}

int
lpfc_reg_congestion_buf(struct lpfc_hba *phba)
{
        return __lpfc_reg_congestion_buf(phba, 1);
}

/**
 * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS.
 * @phba: Pointer to HBA context object.
 * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
 *
 * This function is called in the SLI4 code path to read the port's
 * sli4 capabilities.
 *
 * This function may be be called from any context that can block-wait
 * for the completion.  The expectation is that this routine is called
 * typically from probe_one or from the online routine.
 **/
int
lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
        int rc;
        struct lpfc_mqe *mqe = &mboxq->u.mqe;
        struct lpfc_pc_sli4_params *sli4_params;
        uint32_t mbox_tmo;
        int length;
        bool exp_wqcq_pages = true;
        struct lpfc_sli4_parameters *mbx_sli4_parameters;

        /*
         * By default, the driver assumes the SLI4 port requires RPI
         * header postings.  The SLI4_PARAM response will correct this
         * assumption.
         */
        phba->sli4_hba.rpi_hdrs_in_use = 1;

        /* Read the port's SLI4 Config Parameters */
        length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
                  sizeof(struct lpfc_sli4_cfg_mhdr));
        lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
                         LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS,
                         length, LPFC_SLI4_MBX_EMBED);
        if (!phba->sli4_hba.intr_enable)
                rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
        else {
                mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
                rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
        }
        if (unlikely(rc))
                return rc;
        sli4_params = &phba->sli4_hba.pc_sli4_params;
        mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
        sli4_params->if_type = bf_get(cfg_if_type, mbx_sli4_parameters);
        sli4_params->sli_rev = bf_get(cfg_sli_rev, mbx_sli4_parameters);
        sli4_params->sli_family = bf_get(cfg_sli_family, mbx_sli4_parameters);
        sli4_params->featurelevel_1 = bf_get(cfg_sli_hint_1,
                                             mbx_sli4_parameters);
        sli4_params->featurelevel_2 = bf_get(cfg_sli_hint_2,
                                             mbx_sli4_parameters);
        if (bf_get(cfg_phwq, mbx_sli4_parameters))
                phba->sli3_options |= LPFC_SLI4_PHWQ_ENABLED;
        else
                phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED;
        sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len;
        sli4_params->loopbk_scope = bf_get(cfg_loopbk_scope,
                                           mbx_sli4_parameters);
        sli4_params->oas_supported = bf_get(cfg_oas, mbx_sli4_parameters);
        sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters);
        sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
        sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
        sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
        sli4_params->eqav = bf_get(cfg_eqav, mbx_sli4_parameters);
        sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters);
        sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters);
        sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters);
        sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters);
        sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
                                            mbx_sli4_parameters);
        sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters);
        sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
                                           mbx_sli4_parameters);
        phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters);
        phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters);
        sli4_params->mi_cap = bf_get(cfg_mi_ver, mbx_sli4_parameters);

        /* Check for Extended Pre-Registered SGL support */
        phba->cfg_xpsgl = bf_get(cfg_xpsgl, mbx_sli4_parameters);

        /* Check for firmware nvme support */
        rc = (bf_get(cfg_nvme, mbx_sli4_parameters) &&
                     bf_get(cfg_xib, mbx_sli4_parameters));

        if (rc) {
                /* Save this to indicate the Firmware supports NVME */
                sli4_params->nvme = 1;

                /* Firmware NVME support, check driver FC4 NVME support */
                if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) {
                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
                                        "6133 Disabling NVME support: "
                                        "FC4 type not supported: x%x\n",
                                        phba->cfg_enable_fc4_type);
                        goto fcponly;
                }
        } else {
                /* No firmware NVME support, check driver FC4 NVME support */
                sli4_params->nvme = 0;
                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME,
                                        "6101 Disabling NVME support: Not "
                                        "supported by firmware (%d %d) x%x\n",
                                        bf_get(cfg_nvme, mbx_sli4_parameters),
                                        bf_get(cfg_xib, mbx_sli4_parameters),
                                        phba->cfg_enable_fc4_type);
fcponly:
                        phba->nvmet_support = 0;
                        phba->cfg_nvmet_mrq = 0;
                        phba->cfg_nvme_seg_cnt = 0;

                        /* If no FC4 type support, move to just SCSI support */
                        if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
                                return -ENODEV;
                        phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
                }
        }

        /* If the NVME FC4 type is enabled, scale the sg_seg_cnt to
         * accommodate 512K and 1M IOs in a single nvme buf.
         */
        if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
                phba->cfg_sg_seg_cnt = LPFC_MAX_NVME_SEG_CNT;

        /* Enable embedded Payload BDE if support is indicated */
        if (bf_get(cfg_pbde, mbx_sli4_parameters))
                phba->cfg_enable_pbde = 1;
        else
                phba->cfg_enable_pbde = 0;

        /*
         * To support Suppress Response feature we must satisfy 3 conditions.
         * lpfc_suppress_rsp module parameter must be set (default).
         * In SLI4-Parameters Descriptor:
         * Extended Inline Buffers (XIB) must be supported.
         * Suppress Response IU Not Supported (SRIUNS) must NOT be supported
         * (double negative).
         */
        if (phba->cfg_suppress_rsp && bf_get(cfg_xib, mbx_sli4_parameters) &&
            !(bf_get(cfg_nosr, mbx_sli4_parameters)))
                phba->sli.sli_flag |= LPFC_SLI_SUPPRESS_RSP;
        else
                phba->cfg_suppress_rsp = 0;

        if (bf_get(cfg_eqdr, mbx_sli4_parameters))
                phba->sli.sli_flag |= LPFC_SLI_USE_EQDR;

        /* Make sure that sge_supp_len can be handled by the driver */
        if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE)
                sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE;

        rc = dma_set_max_seg_size(&phba->pcidev->dev, sli4_params->sge_supp_len);
        if (unlikely(rc)) {
                lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                "6400 Can't set dma maximum segment size\n");
                return rc;
        }

        /*
         * Check whether the adapter supports an embedded copy of the
         * FCP CMD IU within the WQE for FCP_Ixxx commands. In order
         * to use this option, 128-byte WQEs must be used.
         */
        if (bf_get(cfg_ext_embed_cb, mbx_sli4_parameters))
                phba->fcp_embed_io = 1;
        else
                phba->fcp_embed_io = 0;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME,
                        "6422 XIB %d PBDE %d: FCP %d NVME %d %d %d\n",
                        bf_get(cfg_xib, mbx_sli4_parameters),
                        phba->cfg_enable_pbde,
                        phba->fcp_embed_io, sli4_params->nvme,
                        phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp);

        if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
            LPFC_SLI_INTF_IF_TYPE_2) &&
            (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
                 LPFC_SLI_INTF_FAMILY_LNCR_A0))
                exp_wqcq_pages = false;

        if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) &&
            (bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) &&
            exp_wqcq_pages &&
            (sli4_params->wqsize & LPFC_WQ_SZ128_SUPPORT))
                phba->enab_exp_wqcq_pages = 1;
        else
                phba->enab_exp_wqcq_pages = 0;
        /*
         * Check if the SLI port supports MDS Diagnostics
         */
        if (bf_get(cfg_mds_diags, mbx_sli4_parameters))
                phba->mds_diags_support = 1;
        else
                phba->mds_diags_support = 0;

        /*
         * Check if the SLI port supports NSLER
         */
        if (bf_get(cfg_nsler, mbx_sli4_parameters))
                phba->nsler = 1;
        else
                phba->nsler = 0;

        return 0;
}

/**
 * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is to be called to attach a device with SLI-3 interface spec
 * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
 * information of the device and driver to see if the driver state that it can
 * support this kind of device. If the match is successful, the driver core
 * invokes this routine. If this routine determines it can claim the HBA, it
 * does all the initialization that it needs to do to handle the HBA properly.
 *
 * Return code
 *      0 - driver can claim the device
 *      negative value - driver can not claim the device
 **/
static int
lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
{
        struct lpfc_hba   *phba;
        struct lpfc_vport *vport = NULL;
        struct Scsi_Host  *shost = NULL;
        int error;
        uint32_t cfg_mode, intr_mode;

        /* Allocate memory for HBA structure */
        phba = lpfc_hba_alloc(pdev);
        if (!phba)
                return -ENOMEM;

        /* Perform generic PCI device enabling operation */
        error = lpfc_enable_pci_dev(phba);
        if (error)
                goto out_free_phba;

        /* Set up SLI API function jump table for PCI-device group-0 HBAs */
        error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
        if (error)
                goto out_disable_pci_dev;

        /* Set up SLI-3 specific device PCI memory space */
        error = lpfc_sli_pci_mem_setup(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1402 Failed to set up pci memory space.\n");
                goto out_disable_pci_dev;
        }

        /* Set up SLI-3 specific device driver resources */
        error = lpfc_sli_driver_resource_setup(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1404 Failed to set up driver resource.\n");
                goto out_unset_pci_mem_s3;
        }

        /* Initialize and populate the iocb list per host */

        error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1405 Failed to initialize iocb list.\n");
                goto out_unset_driver_resource_s3;
        }

        /* Set up common device driver resources */
        error = lpfc_setup_driver_resource_phase2(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1406 Failed to set up driver resource.\n");
                goto out_free_iocb_list;
        }

        /* Get the default values for Model Name and Description */
        lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

        /* Create SCSI host to the physical port */
        error = lpfc_create_shost(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1407 Failed to create scsi host.\n");
                goto out_unset_driver_resource;
        }

        /* Configure sysfs attributes */
        vport = phba->pport;
        error = lpfc_alloc_sysfs_attr(vport);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1476 Failed to allocate sysfs attr\n");
                goto out_destroy_shost;
        }

        shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
        /* Now, trying to enable interrupt and bring up the device */
        cfg_mode = phba->cfg_use_msi;
        while (true) {
                /* Put device to a known state before enabling interrupt */
                lpfc_stop_port(phba);
                /* Configure and enable interrupt */
                intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
                if (intr_mode == LPFC_INTR_ERROR) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "0431 Failed to enable interrupt.\n");
                        error = -ENODEV;
                        goto out_free_sysfs_attr;
                }
                /* SLI-3 HBA setup */
                if (lpfc_sli_hba_setup(phba)) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                        "1477 Failed to set up hba\n");
                        error = -ENODEV;
                        goto out_remove_device;
                }

                /* Wait 50ms for the interrupts of previous mailbox commands */
                msleep(50);
                /* Check active interrupts on message signaled interrupts */
                if (intr_mode == 0 ||
                    phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
                        /* Log the current active interrupt mode */
                        phba->intr_mode = intr_mode;
                        lpfc_log_intr_mode(phba, intr_mode);
                        break;
                } else {
                        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                                        "0447 Configure interrupt mode (%d) "
                                        "failed active interrupt test.\n",
                                        intr_mode);
                        /* Disable the current interrupt mode */
                        lpfc_sli_disable_intr(phba);
                        /* Try next level of interrupt mode */
                        cfg_mode = --intr_mode;
                }
        }

        /* Perform post initialization setup */
        lpfc_post_init_setup(phba);

        /* Check if there are static vports to be created. */
        lpfc_create_static_vport(phba);

        return 0;

out_remove_device:
        lpfc_unset_hba(phba);
out_free_sysfs_attr:
        lpfc_free_sysfs_attr(vport);
out_destroy_shost:
        lpfc_destroy_shost(phba);
out_unset_driver_resource:
        lpfc_unset_driver_resource_phase2(phba);
out_free_iocb_list:
        lpfc_free_iocb_list(phba);
out_unset_driver_resource_s3:
        lpfc_sli_driver_resource_unset(phba);
out_unset_pci_mem_s3:
        lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
        lpfc_disable_pci_dev(phba);
        if (shost)
                scsi_host_put(shost);
out_free_phba:
        lpfc_hba_free(phba);
        return error;
}

/**
 * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
 * @pdev: pointer to PCI device
 *
 * This routine is to be called to disattach a device with SLI-3 interface
 * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
 * removed from PCI bus, it performs all the necessary cleanup for the HBA
 * device to be removed from the PCI subsystem properly.
 **/
static void
lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
        struct Scsi_Host  *shost = pci_get_drvdata(pdev);
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_vport **vports;
        struct lpfc_hba   *phba = vport->phba;
        int i;

        set_bit(FC_UNLOADING, &vport->load_flag);

        lpfc_free_sysfs_attr(vport);

        /* Release all the vports against this physical port */
        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
                                continue;
                        fc_vport_terminate(vports[i]->fc_vport);
                }
        lpfc_destroy_vport_work_array(phba, vports);

        /* Remove FC host with the physical port */
        fc_remove_host(shost);
        scsi_remove_host(shost);

        /* Clean up all nodes, mailboxes and IOs. */
        lpfc_cleanup(vport);

        /*
         * Bring down the SLI Layer. This step disable all interrupts,
         * clears the rings, discards all mailbox commands, and resets
         * the HBA.
         */

        /* HBA interrupt will be disabled after this call */
        lpfc_sli_hba_down(phba);
        /* Stop kthread signal shall trigger work_done one more time */
        kthread_stop(phba->worker_thread);
        /* Final cleanup of txcmplq and reset the HBA */
        lpfc_sli_brdrestart(phba);

        kfree(phba->vpi_bmask);
        kfree(phba->vpi_ids);

        lpfc_stop_hba_timers(phba);
        spin_lock_irq(&phba->port_list_lock);
        list_del_init(&vport->listentry);
        spin_unlock_irq(&phba->port_list_lock);

        lpfc_debugfs_terminate(vport);

        /* Disable SR-IOV if enabled */
        if (phba->cfg_sriov_nr_virtfn)
                pci_disable_sriov(pdev);

        /* Disable interrupt */
        lpfc_sli_disable_intr(phba);

        scsi_host_put(shost);

        /*
         * Call scsi_free before mem_free since scsi bufs are released to their
         * corresponding pools here.
         */
        lpfc_scsi_free(phba);
        lpfc_free_iocb_list(phba);

        lpfc_mem_free_all(phba);

        dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
                          phba->hbqslimp.virt, phba->hbqslimp.phys);

        /* Free resources associated with SLI2 interface */
        dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
                          phba->slim2p.virt, phba->slim2p.phys);

        /* unmap adapter SLIM and Control Registers */
        iounmap(phba->ctrl_regs_memmap_p);
        iounmap(phba->slim_memmap_p);

        lpfc_hba_free(phba);

        pci_release_mem_regions(pdev);
        pci_disable_device(pdev);
}

/**
 * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
 * @dev_d: pointer to device
 *
 * This routine is to be called from the kernel's PCI subsystem to support
 * system Power Management (PM) to device with SLI-3 interface spec. When
 * PM invokes this method, it quiesces the device by stopping the driver's
 * worker thread for the device, turning off device's interrupt and DMA,
 * and bring the device offline. Note that as the driver implements the
 * minimum PM requirements to a power-aware driver's PM support for the
 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
 * to the suspend() method call will be treated as SUSPEND and the driver will
 * fully reinitialize its device during resume() method call, the driver will
 * set device to PCI_D3hot state in PCI config space instead of setting it
 * according to the @msg provided by the PM.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_suspend_one_s3(struct device *dev_d)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev_d);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "0473 PCI device Power Management suspend.\n");

        /* Bring down the device */
        lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        lpfc_offline(phba);
        kthread_stop(phba->worker_thread);

        /* Disable interrupt from device */
        lpfc_sli_disable_intr(phba);

        return 0;
}

/**
 * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
 * @dev_d: pointer to device
 *
 * This routine is to be called from the kernel's PCI subsystem to support
 * system Power Management (PM) to device with SLI-3 interface spec. When PM
 * invokes this method, it restores the device's PCI config space state and
 * fully reinitializes the device and brings it online. Note that as the
 * driver implements the minimum PM requirements to a power-aware driver's
 * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
 * FREEZE) to the suspend() method call will be treated as SUSPEND and the
 * driver will fully reinitialize its device during resume() method call,
 * the device will be set to PCI_D0 directly in PCI config space before
 * restoring the state.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_resume_one_s3(struct device *dev_d)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev_d);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        uint32_t intr_mode;
        int error;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "0452 PCI device Power Management resume.\n");

        /* Startup the kernel thread for this host adapter. */
        phba->worker_thread = kthread_run(lpfc_do_work, phba,
                                        "lpfc_worker_%d", phba->brd_no);
        if (IS_ERR(phba->worker_thread)) {
                error = PTR_ERR(phba->worker_thread);
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0434 PM resume failed to start worker "
                                "thread: error=x%x.\n", error);
                return error;
        }

        /* Init cpu_map array */
        lpfc_cpu_map_array_init(phba);
        /* Init hba_eq_hdl array */
        lpfc_hba_eq_hdl_array_init(phba);
        /* Configure and enable interrupt */
        intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0430 PM resume Failed to enable interrupt\n");
                return -EIO;
        } else
                phba->intr_mode = intr_mode;

        /* Restart HBA and bring it online */
        lpfc_sli_brdrestart(phba);
        lpfc_online(phba);

        /* Log the current active interrupt mode */
        lpfc_log_intr_mode(phba, phba->intr_mode);

        return 0;
}

/**
 * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI3 device for PCI slot recover. It
 * aborts all the outstanding SCSI I/Os to the pci device.
 **/
static void
lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2723 PCI channel I/O abort preparing for recovery\n");

        /*
         * There may be errored I/Os through HBA, abort all I/Os on txcmplq
         * and let the SCSI mid-layer to retry them to recover.
         */
        lpfc_sli_abort_fcp_rings(phba);
}

/**
 * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI3 device for PCI slot reset. It
 * disables the device interrupt and pci device, and aborts the internal FCP
 * pending I/Os.
 **/
static void
lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2710 PCI channel disable preparing for reset\n");

        /* Block any management I/Os to the device */
        lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT);

        /* Block all SCSI devices' I/Os on the host */
        lpfc_scsi_dev_block(phba);

        /* Flush all driver's outstanding SCSI I/Os as we are to reset */
        lpfc_sli_flush_io_rings(phba);

        /* stop all timers */
        lpfc_stop_hba_timers(phba);

        /* Disable interrupt and pci device */
        lpfc_sli_disable_intr(phba);
        pci_disable_device(phba->pcidev);
}

/**
 * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI3 device for PCI slot permanently
 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
 * pending I/Os.
 **/
static void
lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2711 PCI channel permanent disable for failure\n");
        /* Block all SCSI devices' I/Os on the host */
        lpfc_scsi_dev_block(phba);
        lpfc_sli4_prep_dev_for_reset(phba);

        /* stop all timers */
        lpfc_stop_hba_timers(phba);

        /* Clean up all driver's outstanding SCSI I/Os */
        lpfc_sli_flush_io_rings(phba);
}

/**
 * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is called from the PCI subsystem for I/O error handling to
 * device with SLI-3 interface spec. This function is called by the PCI
 * subsystem after a PCI bus error affecting this device has been detected.
 * When this function is invoked, it will need to stop all the I/Os and
 * interrupt(s) to the device. Once that is done, it will return
 * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
 * as desired.
 *
 * Return codes
 *      PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
 *      PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        switch (state) {
        case pci_channel_io_normal:
                /* Non-fatal error, prepare for recovery */
                lpfc_sli_prep_dev_for_recover(phba);
                return PCI_ERS_RESULT_CAN_RECOVER;
        case pci_channel_io_frozen:
                /* Fatal error, prepare for slot reset */
                lpfc_sli_prep_dev_for_reset(phba);
                return PCI_ERS_RESULT_NEED_RESET;
        case pci_channel_io_perm_failure:
                /* Permanent failure, prepare for device down */
                lpfc_sli_prep_dev_for_perm_failure(phba);
                return PCI_ERS_RESULT_DISCONNECT;
        default:
                /* Unknown state, prepare and request slot reset */
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0472 Unknown PCI error state: x%x\n", state);
                lpfc_sli_prep_dev_for_reset(phba);
                return PCI_ERS_RESULT_NEED_RESET;
        }
}

/**
 * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
 * @pdev: pointer to PCI device.
 *
 * This routine is called from the PCI subsystem for error handling to
 * device with SLI-3 interface spec. This is called after PCI bus has been
 * reset to restart the PCI card from scratch, as if from a cold-boot.
 * During the PCI subsystem error recovery, after driver returns
 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
 * recovery and then call this routine before calling the .resume method
 * to recover the device. This function will initialize the HBA device,
 * enable the interrupt, but it will just put the HBA to offline state
 * without passing any I/O traffic.
 *
 * Return codes
 *      PCI_ERS_RESULT_RECOVERED - the device has been recovered
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 */
static pci_ers_result_t
lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        struct lpfc_sli *psli = &phba->sli;
        uint32_t intr_mode;

        dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
        if (pci_enable_device_mem(pdev)) {
                printk(KERN_ERR "lpfc: Cannot re-enable "
                        "PCI device after reset.\n");
                return PCI_ERS_RESULT_DISCONNECT;
        }

        pci_restore_state(pdev);

        /*
         * As the new kernel behavior of pci_restore_state() API call clears
         * device saved_state flag, need to save the restored state again.
         */
        pci_save_state(pdev);

        if (pdev->is_busmaster)
                pci_set_master(pdev);

        spin_lock_irq(&phba->hbalock);
        psli->sli_flag &= ~LPFC_SLI_ACTIVE;
        spin_unlock_irq(&phba->hbalock);

        /* Configure and enable interrupt */
        intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0427 Cannot re-enable interrupt after "
                                "slot reset.\n");
                return PCI_ERS_RESULT_DISCONNECT;
        } else
                phba->intr_mode = intr_mode;

        /* Take device offline, it will perform cleanup */
        lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        lpfc_offline(phba);
        lpfc_sli_brdrestart(phba);

        /* Log the current active interrupt mode */
        lpfc_log_intr_mode(phba, phba->intr_mode);

        return PCI_ERS_RESULT_RECOVERED;
}

/**
 * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
 * @pdev: pointer to PCI device
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-3 interface spec. It is called when kernel error recovery tells
 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
 * error recovery. After this call, traffic can start to flow from this device
 * again.
 */
static void
lpfc_io_resume_s3(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        /* Bring device online, it will be no-op for non-fatal error resume */
        lpfc_online(phba);
}

/**
 * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
 * @phba: pointer to lpfc hba data structure.
 *
 * returns the number of ELS/CT IOCBs to reserve
 **/
int
lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
{
        int max_xri = phba->sli4_hba.max_cfg_param.max_xri;

        if (phba->sli_rev == LPFC_SLI_REV4) {
                if (max_xri <= 100)
                        return 10;
                else if (max_xri <= 256)
                        return 25;
                else if (max_xri <= 512)
                        return 50;
                else if (max_xri <= 1024)
                        return 100;
                else if (max_xri <= 1536)
                        return 150;
                else if (max_xri <= 2048)
                        return 200;
                else
                        return 250;
        } else
                return 0;
}

/**
 * lpfc_sli4_get_iocb_cnt - Calculate the # of total IOCBs to reserve
 * @phba: pointer to lpfc hba data structure.
 *
 * returns the number of ELS/CT + NVMET IOCBs to reserve
 **/
int
lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba)
{
        int max_xri = lpfc_sli4_get_els_iocb_cnt(phba);

        if (phba->nvmet_support)
                max_xri += LPFC_NVMET_BUF_POST;
        return max_xri;
}


static int
lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset,
        uint32_t magic_number, uint32_t ftype, uint32_t fid, uint32_t fsize,
        const struct firmware *fw)
{
        int rc;
        u8 sli_family;

        sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
        /* Three cases:  (1) FW was not supported on the detected adapter.
         * (2) FW update has been locked out administratively.
         * (3) Some other error during FW update.
         * In each case, an unmaskable message is written to the console
         * for admin diagnosis.
         */
        if (offset == ADD_STATUS_FW_NOT_SUPPORTED ||
            (sli_family == LPFC_SLI_INTF_FAMILY_G6 &&
             magic_number != MAGIC_NUMBER_G6) ||
            (sli_family == LPFC_SLI_INTF_FAMILY_G7 &&
             magic_number != MAGIC_NUMBER_G7) ||
            (sli_family == LPFC_SLI_INTF_FAMILY_G7P &&
             magic_number != MAGIC_NUMBER_G7P)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3030 This firmware version is not supported on"
                                " this HBA model. Device:%x Magic:%x Type:%x "
                                "ID:%x Size %d %zd\n",
                                phba->pcidev->device, magic_number, ftype, fid,
                                fsize, fw->size);
                rc = -EINVAL;
        } else if (offset == ADD_STATUS_FW_DOWNLOAD_HW_DISABLED) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3021 Firmware downloads have been prohibited "
                                "by a system configuration setting on "
                                "Device:%x Magic:%x Type:%x ID:%x Size %d "
                                "%zd\n",
                                phba->pcidev->device, magic_number, ftype, fid,
                                fsize, fw->size);
                rc = -EACCES;
        } else {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "3022 FW Download failed. Add Status x%x "
                                "Device:%x Magic:%x Type:%x ID:%x Size %d "
                                "%zd\n",
                                offset, phba->pcidev->device, magic_number,
                                ftype, fid, fsize, fw->size);
                rc = -EIO;
        }
        return rc;
}

/**
 * lpfc_write_firmware - attempt to write a firmware image to the port
 * @fw: pointer to firmware image returned from request_firmware.
 * @context: pointer to firmware image returned from request_firmware.
 *
 **/
static void
lpfc_write_firmware(const struct firmware *fw, void *context)
{
        struct lpfc_hba *phba = (struct lpfc_hba *)context;
        char fwrev[FW_REV_STR_SIZE];
        struct lpfc_grp_hdr *image;
        struct list_head dma_buffer_list;
        int i, rc = 0;
        struct lpfc_dmabuf *dmabuf, *next;
        uint32_t offset = 0, temp_offset = 0;
        uint32_t magic_number, ftype, fid, fsize;

        /* It can be null in no-wait mode, sanity check */
        if (!fw) {
                rc = -ENXIO;
                goto out;
        }
        image = (struct lpfc_grp_hdr *)fw->data;

        magic_number = be32_to_cpu(image->magic_number);
        ftype = bf_get_be32(lpfc_grp_hdr_file_type, image);
        fid = bf_get_be32(lpfc_grp_hdr_id, image);
        fsize = be32_to_cpu(image->size);

        INIT_LIST_HEAD(&dma_buffer_list);
        lpfc_decode_firmware_rev(phba, fwrev, 1);
        if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
                lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
                             "3023 Updating Firmware, Current Version:%s "
                             "New Version:%s\n",
                             fwrev, image->revision);
                for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
                        dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
                                         GFP_KERNEL);
                        if (!dmabuf) {
                                rc = -ENOMEM;
                                goto release_out;
                        }
                        dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
                                                          SLI4_PAGE_SIZE,
                                                          &dmabuf->phys,
                                                          GFP_KERNEL);
                        if (!dmabuf->virt) {
                                kfree(dmabuf);
                                rc = -ENOMEM;
                                goto release_out;
                        }
                        list_add_tail(&dmabuf->list, &dma_buffer_list);
                }
                while (offset < fw->size) {
                        temp_offset = offset;
                        list_for_each_entry(dmabuf, &dma_buffer_list, list) {
                                if (temp_offset + SLI4_PAGE_SIZE > fw->size) {
                                        memcpy(dmabuf->virt,
                                               fw->data + temp_offset,
                                               fw->size - temp_offset);
                                        temp_offset = fw->size;
                                        break;
                                }
                                memcpy(dmabuf->virt, fw->data + temp_offset,
                                       SLI4_PAGE_SIZE);
                                temp_offset += SLI4_PAGE_SIZE;
                        }
                        rc = lpfc_wr_object(phba, &dma_buffer_list,
                                    (fw->size - offset), &offset);
                        if (rc) {
                                rc = lpfc_log_write_firmware_error(phba, offset,
                                                                   magic_number,
                                                                   ftype,
                                                                   fid,
                                                                   fsize,
                                                                   fw);
                                goto release_out;
                        }
                }
                rc = offset;
        } else
                lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
                             "3029 Skipped Firmware update, Current "
                             "Version:%s New Version:%s\n",
                             fwrev, image->revision);

release_out:
        list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
                list_del(&dmabuf->list);
                dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
                                  dmabuf->virt, dmabuf->phys);
                kfree(dmabuf);
        }
        release_firmware(fw);
out:
        if (rc < 0)
                lpfc_log_msg(phba, KERN_ERR, LOG_INIT | LOG_SLI,
                             "3062 Firmware update error, status %d.\n", rc);
        else
                lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI,
                             "3024 Firmware update success: size %d.\n", rc);
}

/**
 * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade
 * @phba: pointer to lpfc hba data structure.
 * @fw_upgrade: which firmware to update.
 *
 * This routine is called to perform Linux generic firmware upgrade on device
 * that supports such feature.
 **/
int
lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade)
{
        char file_name[ELX_FW_NAME_SIZE] = {0};
        int ret;
        const struct firmware *fw;

        /* Only supported on SLI4 interface type 2 for now */
        if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
            LPFC_SLI_INTF_IF_TYPE_2)
                return -EPERM;

        scnprintf(file_name, sizeof(file_name), "%s.grp", phba->ModelName);

        if (fw_upgrade == INT_FW_UPGRADE) {
                ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
                                        file_name, &phba->pcidev->dev,
                                        GFP_KERNEL, (void *)phba,
                                        lpfc_write_firmware);
        } else if (fw_upgrade == RUN_FW_UPGRADE) {
                ret = request_firmware(&fw, file_name, &phba->pcidev->dev);
                if (!ret)
                        lpfc_write_firmware(fw, (void *)phba);
        } else {
                ret = -EINVAL;
        }

        return ret;
}

/**
 * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is called from the kernel's PCI subsystem to device with
 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
 * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
 * information of the device and driver to see if the driver state that it
 * can support this kind of device. If the match is successful, the driver
 * core invokes this routine. If this routine determines it can claim the HBA,
 * it does all the initialization that it needs to do to handle the HBA
 * properly.
 *
 * Return code
 *      0 - driver can claim the device
 *      negative value - driver can not claim the device
 **/
static int
lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
{
        struct lpfc_hba   *phba;
        struct lpfc_vport *vport = NULL;
        struct Scsi_Host  *shost = NULL;
        int error;
        uint32_t cfg_mode, intr_mode;

        /* Allocate memory for HBA structure */
        phba = lpfc_hba_alloc(pdev);
        if (!phba)
                return -ENOMEM;

        INIT_LIST_HEAD(&phba->poll_list);

        /* Perform generic PCI device enabling operation */
        error = lpfc_enable_pci_dev(phba);
        if (error)
                goto out_free_phba;

        /* Set up SLI API function jump table for PCI-device group-1 HBAs */
        error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
        if (error)
                goto out_disable_pci_dev;

        /* Set up SLI-4 specific device PCI memory space */
        error = lpfc_sli4_pci_mem_setup(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1410 Failed to set up pci memory space.\n");
                goto out_disable_pci_dev;
        }

        /* Set up SLI-4 Specific device driver resources */
        error = lpfc_sli4_driver_resource_setup(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1412 Failed to set up driver resource.\n");
                goto out_unset_pci_mem_s4;
        }

        INIT_LIST_HEAD(&phba->active_rrq_list);
        INIT_LIST_HEAD(&phba->fcf.fcf_pri_list);

        /* Set up common device driver resources */
        error = lpfc_setup_driver_resource_phase2(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1414 Failed to set up driver resource.\n");
                goto out_unset_driver_resource_s4;
        }

        /* Get the default values for Model Name and Description */
        lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);

        /* Now, trying to enable interrupt and bring up the device */
        cfg_mode = phba->cfg_use_msi;

        /* Put device to a known state before enabling interrupt */
        phba->pport = NULL;
        lpfc_stop_port(phba);

        /* Init cpu_map array */
        lpfc_cpu_map_array_init(phba);

        /* Init hba_eq_hdl array */
        lpfc_hba_eq_hdl_array_init(phba);

        /* Configure and enable interrupt */
        intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0426 Failed to enable interrupt.\n");
                error = -ENODEV;
                goto out_unset_driver_resource;
        }
        /* Default to single EQ for non-MSI-X */
        if (phba->intr_type != MSIX) {
                phba->cfg_irq_chann = 1;
                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                        if (phba->nvmet_support)
                                phba->cfg_nvmet_mrq = 1;
                }
        }
        lpfc_cpu_affinity_check(phba, phba->cfg_irq_chann);

        /* Create SCSI host to the physical port */
        error = lpfc_create_shost(phba);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1415 Failed to create scsi host.\n");
                goto out_disable_intr;
        }
        vport = phba->pport;
        shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */

        /* Configure sysfs attributes */
        error = lpfc_alloc_sysfs_attr(vport);
        if (error) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "1416 Failed to allocate sysfs attr\n");
                goto out_destroy_shost;
        }

        /* Set up SLI-4 HBA */
        if (lpfc_sli4_hba_setup(phba)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1421 Failed to set up hba\n");
                error = -ENODEV;
                goto out_free_sysfs_attr;
        }

        /* Log the current active interrupt mode */
        phba->intr_mode = intr_mode;
        lpfc_log_intr_mode(phba, intr_mode);

        /* Perform post initialization setup */
        lpfc_post_init_setup(phba);

        /* NVME support in FW earlier in the driver load corrects the
         * FC4 type making a check for nvme_support unnecessary.
         */
        if (phba->nvmet_support == 0) {
                if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
                        /* Create NVME binding with nvme_fc_transport. This
                         * ensures the vport is initialized.  If the localport
                         * create fails, it should not unload the driver to
                         * support field issues.
                         */
                        error = lpfc_nvme_create_localport(vport);
                        if (error) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                                "6004 NVME registration "
                                                "failed, error x%x\n",
                                                error);
                        }
                }
        }

        /* check for firmware upgrade or downgrade */
        if (phba->cfg_request_firmware_upgrade)
                lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE);

        /* Check if there are static vports to be created. */
        lpfc_create_static_vport(phba);

        timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0);
        cpuhp_state_add_instance_nocalls(lpfc_cpuhp_state, &phba->cpuhp);

        return 0;

out_free_sysfs_attr:
        lpfc_free_sysfs_attr(vport);
out_destroy_shost:
        lpfc_destroy_shost(phba);
out_disable_intr:
        lpfc_sli4_disable_intr(phba);
out_unset_driver_resource:
        lpfc_unset_driver_resource_phase2(phba);
out_unset_driver_resource_s4:
        lpfc_sli4_driver_resource_unset(phba);
out_unset_pci_mem_s4:
        lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
        lpfc_disable_pci_dev(phba);
        if (shost)
                scsi_host_put(shost);
out_free_phba:
        lpfc_hba_free(phba);
        return error;
}

/**
 * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
 * @pdev: pointer to PCI device
 *
 * This routine is called from the kernel's PCI subsystem to device with
 * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
 * removed from PCI bus, it performs all the necessary cleanup for the HBA
 * device to be removed from the PCI subsystem properly.
 **/
static void
lpfc_pci_remove_one_s4(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
        struct lpfc_vport **vports;
        struct lpfc_hba *phba = vport->phba;
        int i;

        /* Mark the device unloading flag */
        set_bit(FC_UNLOADING, &vport->load_flag);
        if (phba->cgn_i)
                lpfc_unreg_congestion_buf(phba);

        lpfc_free_sysfs_attr(vport);

        /* Release all the vports against this physical port */
        vports = lpfc_create_vport_work_array(phba);
        if (vports != NULL)
                for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
                        if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
                                continue;
                        fc_vport_terminate(vports[i]->fc_vport);
                }
        lpfc_destroy_vport_work_array(phba, vports);

        /* Remove FC host with the physical port */
        fc_remove_host(shost);
        scsi_remove_host(shost);

        /* Perform ndlp cleanup on the physical port.  The nvme and nvmet
         * localports are destroyed after to cleanup all transport memory.
         */
        lpfc_cleanup(vport);
        lpfc_nvmet_destroy_targetport(phba);
        lpfc_nvme_destroy_localport(vport);

        /* De-allocate multi-XRI pools */
        if (phba->cfg_xri_rebalancing)
                lpfc_destroy_multixri_pools(phba);

        /*
         * Bring down the SLI Layer. This step disables all interrupts,
         * clears the rings, discards all mailbox commands, and resets
         * the HBA FCoE function.
         */
        lpfc_debugfs_terminate(vport);

        lpfc_stop_hba_timers(phba);
        spin_lock_irq(&phba->port_list_lock);
        list_del_init(&vport->listentry);
        spin_unlock_irq(&phba->port_list_lock);

        /* Perform scsi free before driver resource_unset since scsi
         * buffers are released to their corresponding pools here.
         */
        lpfc_io_free(phba);
        lpfc_free_iocb_list(phba);
        lpfc_sli4_hba_unset(phba);

        lpfc_unset_driver_resource_phase2(phba);
        lpfc_sli4_driver_resource_unset(phba);

        /* Unmap adapter Control and Doorbell registers */
        lpfc_sli4_pci_mem_unset(phba);

        /* Release PCI resources and disable device's PCI function */
        scsi_host_put(shost);
        lpfc_disable_pci_dev(phba);

        /* Finally, free the driver's device data structure */
        lpfc_hba_free(phba);

        return;
}

/**
 * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
 * @dev_d: pointer to device
 *
 * This routine is called from the kernel's PCI subsystem to support system
 * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
 * this method, it quiesces the device by stopping the driver's worker
 * thread for the device, turning off device's interrupt and DMA, and bring
 * the device offline. Note that as the driver implements the minimum PM
 * requirements to a power-aware driver's PM support for suspend/resume -- all
 * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
 * method call will be treated as SUSPEND and the driver will fully
 * reinitialize its device during resume() method call, the driver will set
 * device to PCI_D3hot state in PCI config space instead of setting it
 * according to the @msg provided by the PM.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_suspend_one_s4(struct device *dev_d)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev_d);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "2843 PCI device Power Management suspend.\n");

        /* Bring down the device */
        lpfc_offline_prep(phba, LPFC_MBX_WAIT);
        lpfc_offline(phba);
        kthread_stop(phba->worker_thread);

        /* Disable interrupt from device */
        lpfc_sli4_disable_intr(phba);
        lpfc_sli4_queue_destroy(phba);

        return 0;
}

/**
 * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
 * @dev_d: pointer to device
 *
 * This routine is called from the kernel's PCI subsystem to support system
 * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
 * this method, it restores the device's PCI config space state and fully
 * reinitializes the device and brings it online. Note that as the driver
 * implements the minimum PM requirements to a power-aware driver's PM for
 * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
 * to the suspend() method call will be treated as SUSPEND and the driver
 * will fully reinitialize its device during resume() method call, the device
 * will be set to PCI_D0 directly in PCI config space before restoring the
 * state.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_resume_one_s4(struct device *dev_d)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev_d);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        uint32_t intr_mode;
        int error;

        lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
                        "0292 PCI device Power Management resume.\n");

         /* Startup the kernel thread for this host adapter. */
        phba->worker_thread = kthread_run(lpfc_do_work, phba,
                                        "lpfc_worker_%d", phba->brd_no);
        if (IS_ERR(phba->worker_thread)) {
                error = PTR_ERR(phba->worker_thread);
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0293 PM resume failed to start worker "
                                "thread: error=x%x.\n", error);
                return error;
        }

        /* Configure and enable interrupt */
        intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "0294 PM resume Failed to enable interrupt\n");
                return -EIO;
        } else
                phba->intr_mode = intr_mode;

        /* Restart HBA and bring it online */
        lpfc_sli_brdrestart(phba);
        lpfc_online(phba);

        /* Log the current active interrupt mode */
        lpfc_log_intr_mode(phba, phba->intr_mode);

        return 0;
}

/**
 * lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI4 device for PCI slot recover. It
 * aborts all the outstanding SCSI I/Os to the pci device.
 **/
static void
lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2828 PCI channel I/O abort preparing for recovery\n");
        /*
         * There may be errored I/Os through HBA, abort all I/Os on txcmplq
         * and let the SCSI mid-layer to retry them to recover.
         */
        lpfc_sli_abort_fcp_rings(phba);
}

/**
 * lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI4 device for PCI slot reset. It
 * disables the device interrupt and pci device, and aborts the internal FCP
 * pending I/Os.
 **/
static void
lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
{
        int offline =  pci_channel_offline(phba->pcidev);

        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                        "2826 PCI channel disable preparing for reset offline"
                        " %d\n", offline);

        /* Block any management I/Os to the device */
        lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT);


        /* HBA_PCI_ERR was set in io_error_detect */
        lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT);
        /* Flush all driver's outstanding I/Os as we are to reset */
        lpfc_sli_flush_io_rings(phba);
        lpfc_offline(phba);

        /* stop all timers */
        lpfc_stop_hba_timers(phba);

        lpfc_sli4_queue_destroy(phba);
        /* Disable interrupt and pci device */
        lpfc_sli4_disable_intr(phba);
        pci_disable_device(phba->pcidev);
}

/**
 * lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine is called to prepare the SLI4 device for PCI slot permanently
 * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
 * pending I/Os.
 **/
static void
lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
        lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                        "2827 PCI channel permanent disable for failure\n");

        /* Block all SCSI devices' I/Os on the host */
        lpfc_scsi_dev_block(phba);

        /* stop all timers */
        lpfc_stop_hba_timers(phba);

        /* Clean up all driver's outstanding I/Os */
        lpfc_sli_flush_io_rings(phba);
}

/**
 * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. This function is called by the PCI subsystem
 * after a PCI bus error affecting this device has been detected. When this
 * function is invoked, it will need to stop all the I/Os and interrupt(s)
 * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
 * for the PCI subsystem to perform proper recovery as desired.
 *
 * Return codes
 *      PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        bool hba_pci_err;

        switch (state) {
        case pci_channel_io_normal:
                /* Non-fatal error, prepare for recovery */
                lpfc_sli4_prep_dev_for_recover(phba);
                return PCI_ERS_RESULT_CAN_RECOVER;
        case pci_channel_io_frozen:
                hba_pci_err = test_and_set_bit(HBA_PCI_ERR, &phba->bit_flags);
                /* Fatal error, prepare for slot reset */
                if (!hba_pci_err)
                        lpfc_sli4_prep_dev_for_reset(phba);
                else
                        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                        "2832  Already handling PCI error "
                                        "state: x%x\n", state);
                return PCI_ERS_RESULT_NEED_RESET;
        case pci_channel_io_perm_failure:
                set_bit(HBA_PCI_ERR, &phba->bit_flags);
                /* Permanent failure, prepare for device down */
                lpfc_sli4_prep_dev_for_perm_failure(phba);
                return PCI_ERS_RESULT_DISCONNECT;
        default:
                hba_pci_err = test_and_set_bit(HBA_PCI_ERR, &phba->bit_flags);
                if (!hba_pci_err)
                        lpfc_sli4_prep_dev_for_reset(phba);
                /* Unknown state, prepare and request slot reset */
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2825 Unknown PCI error state: x%x\n", state);
                lpfc_sli4_prep_dev_for_reset(phba);
                return PCI_ERS_RESULT_NEED_RESET;
        }
}

/**
 * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
 * @pdev: pointer to PCI device.
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. It is called after PCI bus has been reset to
 * restart the PCI card from scratch, as if from a cold-boot. During the
 * PCI subsystem error recovery, after the driver returns
 * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
 * recovery and then call this routine before calling the .resume method to
 * recover the device. This function will initialize the HBA device, enable
 * the interrupt, but it will just put the HBA to offline state without
 * passing any I/O traffic.
 *
 * Return codes
 *      PCI_ERS_RESULT_RECOVERED - the device has been recovered
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 */
static pci_ers_result_t
lpfc_io_slot_reset_s4(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        struct lpfc_sli *psli = &phba->sli;
        uint32_t intr_mode;
        bool hba_pci_err;

        dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
        if (pci_enable_device_mem(pdev)) {
                printk(KERN_ERR "lpfc: Cannot re-enable "
                       "PCI device after reset.\n");
                return PCI_ERS_RESULT_DISCONNECT;
        }

        pci_restore_state(pdev);

        hba_pci_err = test_and_clear_bit(HBA_PCI_ERR, &phba->bit_flags);
        if (!hba_pci_err)
                dev_info(&pdev->dev,
                         "hba_pci_err was not set, recovering slot reset.\n");
        /*
         * As the new kernel behavior of pci_restore_state() API call clears
         * device saved_state flag, need to save the restored state again.
         */
        pci_save_state(pdev);

        if (pdev->is_busmaster)
                pci_set_master(pdev);

        spin_lock_irq(&phba->hbalock);
        psli->sli_flag &= ~LPFC_SLI_ACTIVE;
        spin_unlock_irq(&phba->hbalock);

        /* Init cpu_map array */
        lpfc_cpu_map_array_init(phba);
        /* Configure and enable interrupt */
        intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
        if (intr_mode == LPFC_INTR_ERROR) {
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "2824 Cannot re-enable interrupt after "
                                "slot reset.\n");
                return PCI_ERS_RESULT_DISCONNECT;
        } else
                phba->intr_mode = intr_mode;
        lpfc_cpu_affinity_check(phba, phba->cfg_irq_chann);

        /* Log the current active interrupt mode */
        lpfc_log_intr_mode(phba, phba->intr_mode);

        return PCI_ERS_RESULT_RECOVERED;
}

/**
 * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
 * @pdev: pointer to PCI device
 *
 * This routine is called from the PCI subsystem for error handling to device
 * with SLI-4 interface spec. It is called when kernel error recovery tells
 * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
 * error recovery. After this call, traffic can start to flow from this device
 * again.
 **/
static void
lpfc_io_resume_s4(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        /*
         * In case of slot reset, as function reset is performed through
         * mailbox command which needs DMA to be enabled, this operation
         * has to be moved to the io resume phase. Taking device offline
         * will perform the necessary cleanup.
         */
        if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) {
                /* Perform device reset */
                lpfc_sli_brdrestart(phba);
                /* Bring the device back online */
                lpfc_online(phba);
        }
}

/**
 * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
 * @pdev: pointer to PCI device
 * @pid: pointer to PCI device identifier
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
 * at PCI device-specific information of the device and driver to see if the
 * driver state that it can support this kind of device. If the match is
 * successful, the driver core invokes this routine. This routine dispatches
 * the action to the proper SLI-3 or SLI-4 device probing routine, which will
 * do all the initialization that it needs to do to handle the HBA device
 * properly.
 *
 * Return code
 *      0 - driver can claim the device
 *      negative value - driver can not claim the device
 **/
static int
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
        int rc;
        struct lpfc_sli_intf intf;

        if (pci_read_config_dword(pdev, LPFC_SLI_INTF, &intf.word0))
                return -ENODEV;

        if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) &&
            (bf_get(lpfc_sli_intf_slirev, &intf) == LPFC_SLI_INTF_REV_SLI4))
                rc = lpfc_pci_probe_one_s4(pdev, pid);
        else
                rc = lpfc_pci_probe_one_s3(pdev, pid);

        return rc;
}

/**
 * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
 * @pdev: pointer to PCI device
 *
 * This routine is to be registered to the kernel's PCI subsystem. When an
 * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
 * This routine dispatches the action to the proper SLI-3 or SLI-4 device
 * remove routine, which will perform all the necessary cleanup for the
 * device to be removed from the PCI subsystem properly.
 **/
static void
lpfc_pci_remove_one(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                lpfc_pci_remove_one_s3(pdev);
                break;
        case LPFC_PCI_DEV_OC:
                lpfc_pci_remove_one_s4(pdev);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1424 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return;
}

/**
 * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
 * @dev: pointer to device
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it dispatches
 * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
 * suspend the device.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_suspend_one(struct device *dev)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        int rc = -ENODEV;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                rc = lpfc_pci_suspend_one_s3(dev);
                break;
        case LPFC_PCI_DEV_OC:
                rc = lpfc_pci_suspend_one_s4(dev);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1425 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return rc;
}

/**
 * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
 * @dev: pointer to device
 *
 * This routine is to be registered to the kernel's PCI subsystem to support
 * system Power Management (PM). When PM invokes this method, it dispatches
 * the action to the proper SLI-3 or SLI-4 device resume routine, which will
 * resume the device.
 *
 * Return code
 *      0 - driver suspended the device
 *      Error otherwise
 **/
static int __maybe_unused
lpfc_pci_resume_one(struct device *dev)
{
        struct Scsi_Host *shost = dev_get_drvdata(dev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        int rc = -ENODEV;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                rc = lpfc_pci_resume_one_s3(dev);
                break;
        case LPFC_PCI_DEV_OC:
                rc = lpfc_pci_resume_one_s4(dev);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1426 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return rc;
}

/**
 * lpfc_io_error_detected - lpfc method for handling PCI I/O error
 * @pdev: pointer to PCI device.
 * @state: the current PCI connection state.
 *
 * This routine is registered to the PCI subsystem for error handling. This
 * function is called by the PCI subsystem after a PCI bus error affecting
 * this device has been detected. When this routine is invoked, it dispatches
 * the action to the proper SLI-3 or SLI-4 device error detected handling
 * routine, which will perform the proper error detected operation.
 *
 * Return codes
 *      PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;

        if (phba->link_state == LPFC_HBA_ERROR &&
            phba->hba_flag & HBA_IOQ_FLUSH)
                return PCI_ERS_RESULT_NEED_RESET;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                rc = lpfc_io_error_detected_s3(pdev, state);
                break;
        case LPFC_PCI_DEV_OC:
                rc = lpfc_io_error_detected_s4(pdev, state);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1427 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return rc;
}

/**
 * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
 * @pdev: pointer to PCI device.
 *
 * This routine is registered to the PCI subsystem for error handling. This
 * function is called after PCI bus has been reset to restart the PCI card
 * from scratch, as if from a cold-boot. When this routine is invoked, it
 * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
 * routine, which will perform the proper device reset.
 *
 * Return codes
 *      PCI_ERS_RESULT_RECOVERED - the device has been recovered
 *      PCI_ERS_RESULT_DISCONNECT - device could not be recovered
 **/
static pci_ers_result_t
lpfc_io_slot_reset(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
        pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                rc = lpfc_io_slot_reset_s3(pdev);
                break;
        case LPFC_PCI_DEV_OC:
                rc = lpfc_io_slot_reset_s4(pdev);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1428 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return rc;
}

/**
 * lpfc_io_resume - lpfc method for resuming PCI I/O operation
 * @pdev: pointer to PCI device
 *
 * This routine is registered to the PCI subsystem for error handling. It
 * is called when kernel error recovery tells the lpfc driver that it is
 * OK to resume normal PCI operation after PCI bus error recovery. When
 * this routine is invoked, it dispatches the action to the proper SLI-3
 * or SLI-4 device io_resume routine, which will resume the device operation.
 **/
static void
lpfc_io_resume(struct pci_dev *pdev)
{
        struct Scsi_Host *shost = pci_get_drvdata(pdev);
        struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;

        switch (phba->pci_dev_grp) {
        case LPFC_PCI_DEV_LP:
                lpfc_io_resume_s3(pdev);
                break;
        case LPFC_PCI_DEV_OC:
                lpfc_io_resume_s4(pdev);
                break;
        default:
                lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
                                "1429 Invalid PCI device group: 0x%x\n",
                                phba->pci_dev_grp);
                break;
        }
        return;
}

/**
 * lpfc_sli4_oas_verify - Verify OAS is supported by this adapter
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine checks to see if OAS is supported for this adapter. If
 * supported, the configure Flash Optimized Fabric flag is set.  Otherwise,
 * the enable oas flag is cleared and the pool created for OAS device data
 * is destroyed.
 *
 **/
static void
lpfc_sli4_oas_verify(struct lpfc_hba *phba)
{

        if (!phba->cfg_EnableXLane)
                return;

        if (phba->sli4_hba.pc_sli4_params.oas_supported) {
                phba->cfg_fof = 1;
        } else {
                phba->cfg_fof = 0;
                mempool_destroy(phba->device_data_mem_pool);
                phba->device_data_mem_pool = NULL;
        }

        return;
}

/**
 * lpfc_sli4_ras_init - Verify RAS-FW log is supported by this adapter
 * @phba: pointer to lpfc hba data structure.
 *
 * This routine checks to see if RAS is supported by the adapter. Check the
 * function through which RAS support enablement is to be done.
 **/
void
lpfc_sli4_ras_init(struct lpfc_hba *phba)
{
        /* if ASIC_GEN_NUM >= 0xC) */
        if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
                    LPFC_SLI_INTF_IF_TYPE_6) ||
            (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) ==
                    LPFC_SLI_INTF_FAMILY_G6)) {
                phba->ras_fwlog.ras_hwsupport = true;
                if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn) &&
                    phba->cfg_ras_fwlog_buffsize)
                        phba->ras_fwlog.ras_enabled = true;
                else
                        phba->ras_fwlog.ras_enabled = false;
        } else {
                phba->ras_fwlog.ras_hwsupport = false;
        }
}


MODULE_DEVICE_TABLE(pci, lpfc_id_table);

static const struct pci_error_handlers lpfc_err_handler = {
        .error_detected = lpfc_io_error_detected,
        .slot_reset = lpfc_io_slot_reset,
        .resume = lpfc_io_resume,
};

static SIMPLE_DEV_PM_OPS(lpfc_pci_pm_ops_one,
                         lpfc_pci_suspend_one,
                         lpfc_pci_resume_one);

static struct pci_driver lpfc_driver = {
        .name           = LPFC_DRIVER_NAME,
        .id_table       = lpfc_id_table,
        .probe          = lpfc_pci_probe_one,
        .remove         = lpfc_pci_remove_one,
        .shutdown       = lpfc_pci_remove_one,
        .driver.pm      = &lpfc_pci_pm_ops_one,
        .err_handler    = &lpfc_err_handler,
};

static const struct file_operations lpfc_mgmt_fop = {
        .owner = THIS_MODULE,
};

static struct miscdevice lpfc_mgmt_dev = {
        .minor = MISC_DYNAMIC_MINOR,
        .name = "lpfcmgmt",
        .fops = &lpfc_mgmt_fop,
};

/**
 * lpfc_init - lpfc module initialization routine
 *
 * This routine is to be invoked when the lpfc module is loaded into the
 * kernel. The special kernel macro module_init() is used to indicate the
 * role of this routine to the kernel as lpfc module entry point.
 *
 * Return codes
 *   0 - successful
 *   -ENOMEM - FC attach transport failed
 *   all others - failed
 */
static int __init
lpfc_init(void)
{
        int error = 0;

        pr_info(LPFC_MODULE_DESC "\n");
        pr_info(LPFC_COPYRIGHT "\n");

        error = misc_register(&lpfc_mgmt_dev);
        if (error)
                printk(KERN_ERR "Could not register lpfcmgmt device, "
                        "misc_register returned with status %d", error);

        error = -ENOMEM;
        lpfc_transport_functions.vport_create = lpfc_vport_create;
        lpfc_transport_functions.vport_delete = lpfc_vport_delete;
        lpfc_transport_template =
                                fc_attach_transport(&lpfc_transport_functions);
        if (lpfc_transport_template == NULL)
                goto unregister;
        lpfc_vport_transport_template =
                fc_attach_transport(&lpfc_vport_transport_functions);
        if (lpfc_vport_transport_template == NULL) {
                fc_release_transport(lpfc_transport_template);
                goto unregister;
        }
        lpfc_wqe_cmd_template();
        lpfc_nvmet_cmd_template();

        /* Initialize in case vector mapping is needed */
        lpfc_present_cpu = num_present_cpus();

        lpfc_pldv_detect = false;

        error = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
                                        "lpfc/sli4:online",
                                        lpfc_cpu_online, lpfc_cpu_offline);
        if (error < 0)
                goto cpuhp_failure;
        lpfc_cpuhp_state = error;

        error = pci_register_driver(&lpfc_driver);
        if (error)
                goto unwind;

        return error;

unwind:
        cpuhp_remove_multi_state(lpfc_cpuhp_state);
cpuhp_failure:
        fc_release_transport(lpfc_transport_template);
        fc_release_transport(lpfc_vport_transport_template);
unregister:
        misc_deregister(&lpfc_mgmt_dev);

        return error;
}

void lpfc_dmp_dbg(struct lpfc_hba *phba)
{
        unsigned int start_idx;
        unsigned int dbg_cnt;
        unsigned int temp_idx;
        int i;
        int j = 0;
        unsigned long rem_nsec;

        if (atomic_cmpxchg(&phba->dbg_log_dmping, 0, 1) != 0)
                return;

        start_idx = (unsigned int)atomic_read(&phba->dbg_log_idx) % DBG_LOG_SZ;
        dbg_cnt = (unsigned int)atomic_read(&phba->dbg_log_cnt);
        if (!dbg_cnt)
                goto out;
        temp_idx = start_idx;
        if (dbg_cnt >= DBG_LOG_SZ) {
                dbg_cnt = DBG_LOG_SZ;
                temp_idx -= 1;
        } else {
                if ((start_idx + dbg_cnt) > (DBG_LOG_SZ - 1)) {
                        temp_idx = (start_idx + dbg_cnt) % DBG_LOG_SZ;
                } else {
                        if (start_idx < dbg_cnt)
                                start_idx = DBG_LOG_SZ - (dbg_cnt - start_idx);
                        else
                                start_idx -= dbg_cnt;
                }
        }
        dev_info(&phba->pcidev->dev, "start %d end %d cnt %d\n",
                 start_idx, temp_idx, dbg_cnt);

        for (i = 0; i < dbg_cnt; i++) {
                if ((start_idx + i) < DBG_LOG_SZ)
                        temp_idx = (start_idx + i) % DBG_LOG_SZ;
                else
                        temp_idx = j++;
                rem_nsec = do_div(phba->dbg_log[temp_idx].t_ns, NSEC_PER_SEC);
                dev_info(&phba->pcidev->dev, "%d: [%5lu.%06lu] %s",
                         temp_idx,
                         (unsigned long)phba->dbg_log[temp_idx].t_ns,
                         rem_nsec / 1000,
                         phba->dbg_log[temp_idx].log);
        }
out:
        atomic_set(&phba->dbg_log_cnt, 0);
        atomic_set(&phba->dbg_log_dmping, 0);
}

__printf(2, 3)
void lpfc_dbg_print(struct lpfc_hba *phba, const char *fmt, ...)
{
        unsigned int idx;
        va_list args;
        int dbg_dmping = atomic_read(&phba->dbg_log_dmping);
        struct va_format vaf;


        va_start(args, fmt);
        if (unlikely(dbg_dmping)) {
                vaf.fmt = fmt;
                vaf.va = &args;
                dev_info(&phba->pcidev->dev, "%pV", &vaf);
                va_end(args);
                return;
        }
        idx = (unsigned int)atomic_fetch_add(1, &phba->dbg_log_idx) %
                DBG_LOG_SZ;

        atomic_inc(&phba->dbg_log_cnt);

        vscnprintf(phba->dbg_log[idx].log,
                   sizeof(phba->dbg_log[idx].log), fmt, args);
        va_end(args);

        phba->dbg_log[idx].t_ns = local_clock();
}

/**
 * lpfc_exit - lpfc module removal routine
 *
 * This routine is invoked when the lpfc module is removed from the kernel.
 * The special kernel macro module_exit() is used to indicate the role of
 * this routine to the kernel as lpfc module exit point.
 */
static void __exit
lpfc_exit(void)
{
        misc_deregister(&lpfc_mgmt_dev);
        pci_unregister_driver(&lpfc_driver);
        cpuhp_remove_multi_state(lpfc_cpuhp_state);
        fc_release_transport(lpfc_transport_template);
        fc_release_transport(lpfc_vport_transport_template);
        idr_destroy(&lpfc_hba_index);
}

module_init(lpfc_init);
module_exit(lpfc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(LPFC_MODULE_DESC);
MODULE_AUTHOR("Broadcom");
MODULE_VERSION("0:" LPFC_DRIVER_VERSION);