drivers/net/ethernet/myricom/myri10ge/myri10ge.c

   1 /*************************************************************************
   2  * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3  *
   4  * Copyright (C) 2005 - 2011 Myricom, Inc.
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions and the following disclaimer.
  12  * 2. Redistributions in binary form must reproduce the above copyright
  13  *    notice, this list of conditions and the following disclaimer in the
  14  *    documentation and/or other materials provided with the distribution.
  15  * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16  *    may be used to endorse or promote products derived from this software
  17  *    without specific prior written permission.
  18  *
  19  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29  * POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  *
  32  * If the eeprom on your board is not recent enough, you will need to get a
  33  * newer firmware image at:
  34  *   http://www.myri.com/scs/download-Myri10GE.html
  35  *
  36  * Contact Information:
  37  *   <help@myri.com>
  38  *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39  *************************************************************************/
  40
  41 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  42
  43 #include <linux/tcp.h>
  44 #include <linux/netdevice.h>
  45 #include <linux/skbuff.h>
  46 #include <linux/string.h>
  47 #include <linux/module.h>
  48 #include <linux/pci.h>
  49 #include <linux/dma-mapping.h>
  50 #include <linux/etherdevice.h>
  51 #include <linux/if_ether.h>
  52 #include <linux/if_vlan.h>
  53 #include <linux/dca.h>
  54 #include <linux/ip.h>
  55 #include <linux/inet.h>
  56 #include <linux/in.h>
  57 #include <linux/ethtool.h>
  58 #include <linux/firmware.h>
  59 #include <linux/delay.h>
  60 #include <linux/timer.h>
  61 #include <linux/vmalloc.h>
  62 #include <linux/crc32.h>
  63 #include <linux/moduleparam.h>
  64 #include <linux/io.h>
  65 #include <linux/log2.h>
  66 #include <linux/slab.h>
  67 #include <linux/prefetch.h>
  68 #include <net/checksum.h>
  69 #include <net/ip.h>
  70 #include <net/tcp.h>
  71 #include <asm/byteorder.h>
  72 #include <asm/io.h>
  73 #include <asm/processor.h>
  74 #ifdef CONFIG_MTRR
  75 #include <asm/mtrr.h>
  76 #endif
  77 #include <net/busy_poll.h>
  78
  79 #include "myri10ge_mcp.h"
  80 #include "myri10ge_mcp_gen_header.h"
  81
  82 #define MYRI10GE_VERSION_STR "1.5.3-1.534"
  83
  84 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  85 MODULE_AUTHOR("Maintainer: help@myri.com");
  86 MODULE_VERSION(MYRI10GE_VERSION_STR);
  87 MODULE_LICENSE("Dual BSD/GPL");
  88
  89 #define MYRI10GE_MAX_ETHER_MTU 9014
  90
  91 #define MYRI10GE_ETH_STOPPED 0
  92 #define MYRI10GE_ETH_STOPPING 1
  93 #define MYRI10GE_ETH_STARTING 2
  94 #define MYRI10GE_ETH_RUNNING 3
  95 #define MYRI10GE_ETH_OPEN_FAILED 4
  96
  97 #define MYRI10GE_EEPROM_STRINGS_SIZE 256
  98 #define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  99
 100 #define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
 101 #define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
 102
 103 #define MYRI10GE_ALLOC_ORDER 0
 104 #define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 105 #define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 106
 107 #define MYRI10GE_MAX_SLICES 32
 108
 109 struct myri10ge_rx_buffer_state {
 110         struct page *page;
 111         int page_offset;
 112         DEFINE_DMA_UNMAP_ADDR(bus);
 113         DEFINE_DMA_UNMAP_LEN(len);
 114 };
 115
 116 struct myri10ge_tx_buffer_state {
 117         struct sk_buff *skb;
 118         int last;
 119         DEFINE_DMA_UNMAP_ADDR(bus);
 120         DEFINE_DMA_UNMAP_LEN(len);
 121 };
 122
 123 struct myri10ge_cmd {
 124         u32 data0;
 125         u32 data1;
 126         u32 data2;
 127 };
 128
 129 struct myri10ge_rx_buf {
 130         struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 131         struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 132         struct myri10ge_rx_buffer_state *info;
 133         struct page *page;
 134         dma_addr_t bus;
 135         int page_offset;
 136         int cnt;
 137         int fill_cnt;
 138         int alloc_fail;
 139         int mask;               /* number of rx slots -1 */
 140         int watchdog_needed;
 141 };
 142
 143 struct myri10ge_tx_buf {
 144         struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 145         __be32 __iomem *send_go;        /* "go" doorbell ptr */
 146         __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 147         struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 148         char *req_bytes;
 149         struct myri10ge_tx_buffer_state *info;
 150         int mask;               /* number of transmit slots -1  */
 151         int req ____cacheline_aligned;  /* transmit slots submitted     */
 152         int pkt_start;          /* packets started */
 153         int stop_queue;
 154         int linearized;
 155         int done ____cacheline_aligned; /* transmit slots completed     */
 156         int pkt_done;           /* packets completed */
 157         int wake_queue;
 158         int queue_active;
 159 };
 160
 161 struct myri10ge_rx_done {
 162         struct mcp_slot *entry;
 163         dma_addr_t bus;
 164         int cnt;
 165         int idx;
 166 };
 167
 168 struct myri10ge_slice_netstats {
 169         unsigned long rx_packets;
 170         unsigned long tx_packets;
 171         unsigned long rx_bytes;
 172         unsigned long tx_bytes;
 173         unsigned long rx_dropped;
 174         unsigned long tx_dropped;
 175 };
 176
 177 struct myri10ge_slice_state {
 178         struct myri10ge_tx_buf tx;      /* transmit ring        */
 179         struct myri10ge_rx_buf rx_small;
 180         struct myri10ge_rx_buf rx_big;
 181         struct myri10ge_rx_done rx_done;
 182         struct net_device *dev;
 183         struct napi_struct napi;
 184         struct myri10ge_priv *mgp;
 185         struct myri10ge_slice_netstats stats;
 186         __be32 __iomem *irq_claim;
 187         struct mcp_irq_data *fw_stats;
 188         dma_addr_t fw_stats_bus;
 189         int watchdog_tx_done;
 190         int watchdog_tx_req;
 191         int watchdog_rx_done;
 192         int stuck;
 193 #ifdef CONFIG_MYRI10GE_DCA
 194         int cached_dca_tag;
 195         int cpu;
 196         __be32 __iomem *dca_tag;
 197 #endif
 198 #ifdef CONFIG_NET_RX_BUSY_POLL
 199         unsigned int state;
 200 #define SLICE_STATE_IDLE        0
 201 #define SLICE_STATE_NAPI        1       /* NAPI owns this slice */
 202 #define SLICE_STATE_POLL        2       /* poll owns this slice */
 203 #define SLICE_LOCKED (SLICE_STATE_NAPI | SLICE_STATE_POLL)
 204 #define SLICE_STATE_NAPI_YIELD  4       /* NAPI yielded this slice */
 205 #define SLICE_STATE_POLL_YIELD  8       /* poll yielded this slice */
 206 #define SLICE_USER_PEND (SLICE_STATE_POLL | SLICE_STATE_POLL_YIELD)
 207         spinlock_t lock;
 208         unsigned long lock_napi_yield;
 209         unsigned long lock_poll_yield;
 210         unsigned long busy_poll_miss;
 211         unsigned long busy_poll_cnt;
 212 #endif /* CONFIG_NET_RX_BUSY_POLL */
 213         char irq_desc[32];
 214 };
 215
 216 struct myri10ge_priv {
 217         struct myri10ge_slice_state *ss;
 218         int tx_boundary;        /* boundary transmits cannot cross */
 219         int num_slices;
 220         int running;            /* running?             */
 221         int small_bytes;
 222         int big_bytes;
 223         int max_intr_slots;
 224         struct net_device *dev;
 225         u8 __iomem *sram;
 226         int sram_size;
 227         unsigned long board_span;
 228         unsigned long iomem_base;
 229         __be32 __iomem *irq_deassert;
 230         char *mac_addr_string;
 231         struct mcp_cmd_response *cmd;
 232         dma_addr_t cmd_bus;
 233         struct pci_dev *pdev;
 234         int msi_enabled;
 235         int msix_enabled;
 236         struct msix_entry *msix_vectors;
 237 #ifdef CONFIG_MYRI10GE_DCA
 238         int dca_enabled;
 239         int relaxed_order;
 240 #endif
 241         u32 link_state;
 242         unsigned int rdma_tags_available;
 243         int intr_coal_delay;
 244         __be32 __iomem *intr_coal_delay_ptr;
 245         int mtrr;
 246         int wc_enabled;
 247         int down_cnt;
 248         wait_queue_head_t down_wq;
 249         struct work_struct watchdog_work;
 250         struct timer_list watchdog_timer;
 251         int watchdog_resets;
 252         int watchdog_pause;
 253         int pause;
 254         bool fw_name_allocated;
 255         char *fw_name;
 256         char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 257         char *product_code_string;
 258         char fw_version[128];
 259         int fw_ver_major;
 260         int fw_ver_minor;
 261         int fw_ver_tiny;
 262         int adopted_rx_filter_bug;
 263         u8 mac_addr[ETH_ALEN];          /* eeprom mac address */
 264         unsigned long serial_number;
 265         int vendor_specific_offset;
 266         int fw_multicast_support;
 267         u32 features;
 268         u32 max_tso6;
 269         u32 read_dma;
 270         u32 write_dma;
 271         u32 read_write_dma;
 272         u32 link_changes;
 273         u32 msg_enable;
 274         unsigned int board_number;
 275         int rebooted;
 276 };
 277
 278 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 279 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 280 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 281 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 282 MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
 283 MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
 284 MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
 285 MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 286
 287 /* Careful: must be accessed under kparam_block_sysfs_write */
 288 static char *myri10ge_fw_name = NULL;
 289 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 290 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 291
 292 #define MYRI10GE_MAX_BOARDS 8
 293 static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
 294     {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
 295 module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
 296                          0444);
 297 MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
 298
 299 static int myri10ge_ecrc_enable = 1;
 300 module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 301 MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 302
 303 static int myri10ge_small_bytes = -1;   /* -1 == auto */
 304 module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
 305 MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 306
 307 static int myri10ge_msi = 1;    /* enable msi by default */
 308 module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
 309 MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 310
 311 static int myri10ge_intr_coal_delay = 75;
 312 module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
 313 MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 314
 315 static int myri10ge_flow_control = 1;
 316 module_param(myri10ge_flow_control, int, S_IRUGO);
 317 MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 318
 319 static int myri10ge_deassert_wait = 1;
 320 module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
 321 MODULE_PARM_DESC(myri10ge_deassert_wait,
 322                  "Wait when deasserting legacy interrupts");
 323
 324 static int myri10ge_force_firmware = 0;
 325 module_param(myri10ge_force_firmware, int, S_IRUGO);
 326 MODULE_PARM_DESC(myri10ge_force_firmware,
 327                  "Force firmware to assume aligned completions");
 328
 329 static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 330 module_param(myri10ge_initial_mtu, int, S_IRUGO);
 331 MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 332
 333 static int myri10ge_napi_weight = 64;
 334 module_param(myri10ge_napi_weight, int, S_IRUGO);
 335 MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 336
 337 static int myri10ge_watchdog_timeout = 1;
 338 module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
 339 MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 340
 341 static int myri10ge_max_irq_loops = 1048576;
 342 module_param(myri10ge_max_irq_loops, int, S_IRUGO);
 343 MODULE_PARM_DESC(myri10ge_max_irq_loops,
 344                  "Set stuck legacy IRQ detection threshold");
 345
 346 #define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 347
 348 static int myri10ge_debug = -1; /* defaults above */
 349 module_param(myri10ge_debug, int, 0);
 350 MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 351
 352 static int myri10ge_fill_thresh = 256;
 353 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 354 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 355
 356 static int myri10ge_reset_recover = 1;
 357
 358 static int myri10ge_max_slices = 1;
 359 module_param(myri10ge_max_slices, int, S_IRUGO);
 360 MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 361
 362 static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
 363 module_param(myri10ge_rss_hash, int, S_IRUGO);
 364 MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 365
 366 static int myri10ge_dca = 1;
 367 module_param(myri10ge_dca, int, S_IRUGO);
 368 MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 369
 370 #define MYRI10GE_FW_OFFSET 1024*1024
 371 #define MYRI10GE_HIGHPART_TO_U32(X) \
 372 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 373 #define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 374
 375 #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 376
 377 static void myri10ge_set_multicast_list(struct net_device *dev);
 378 static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
 379                                          struct net_device *dev);
 380
 381 static inline void put_be32(__be32 val, __be32 __iomem * p)
 382 {
 383         __raw_writel((__force __u32) val, (__force void __iomem *)p);
 384 }
 385
 386 static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
 387                                                     struct rtnl_link_stats64 *stats);
 388
 389 static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
 390 {
 391         if (mgp->fw_name_allocated)
 392                 kfree(mgp->fw_name);
 393         mgp->fw_name = name;
 394         mgp->fw_name_allocated = allocated;
 395 }
 396
 397 static int
 398 myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 399                   struct myri10ge_cmd *data, int atomic)
 400 {
 401         struct mcp_cmd *buf;
 402         char buf_bytes[sizeof(*buf) + 8];
 403         struct mcp_cmd_response *response = mgp->cmd;
 404         char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 405         u32 dma_low, dma_high, result, value;
 406         int sleep_total = 0;
 407
 408         /* ensure buf is aligned to 8 bytes */
 409         buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 410
 411         buf->data0 = htonl(data->data0);
 412         buf->data1 = htonl(data->data1);
 413         buf->data2 = htonl(data->data2);
 414         buf->cmd = htonl(cmd);
 415         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 416         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 417
 418         buf->response_addr.low = htonl(dma_low);
 419         buf->response_addr.high = htonl(dma_high);
 420         response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 421         mb();
 422         myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 423
 424         /* wait up to 15ms. Longest command is the DMA benchmark,
 425          * which is capped at 5ms, but runs from a timeout handler
 426          * that runs every 7.8ms. So a 15ms timeout leaves us with
 427          * a 2.2ms margin
 428          */
 429         if (atomic) {
 430                 /* if atomic is set, do not sleep,
 431                  * and try to get the completion quickly
 432                  * (1ms will be enough for those commands) */
 433                 for (sleep_total = 0;
 434                      sleep_total < 1000 &&
 435                      response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 436                      sleep_total += 10) {
 437                         udelay(10);
 438                         mb();
 439                 }
 440         } else {
 441                 /* use msleep for most command */
 442                 for (sleep_total = 0;
 443                      sleep_total < 15 &&
 444                      response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 445                      sleep_total++)
 446                         msleep(1);
 447         }
 448
 449         result = ntohl(response->result);
 450         value = ntohl(response->data);
 451         if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 452                 if (result == 0) {
 453                         data->data0 = value;
 454                         return 0;
 455                 } else if (result == MXGEFW_CMD_UNKNOWN) {
 456                         return -ENOSYS;
 457                 } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 458                         return -E2BIG;
 459                 } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 460                            cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 461                            (data->
 462                             data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 463                            0) {
 464                         return -ERANGE;
 465                 } else {
 466                         dev_err(&mgp->pdev->dev,
 467                                 "command %d failed, result = %d\n",
 468                                 cmd, result);
 469                         return -ENXIO;
 470                 }
 471         }
 472
 473         dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 474                 cmd, result);
 475         return -EAGAIN;
 476 }
 477
 478 /*
 479  * The eeprom strings on the lanaiX have the format
 480  * SN=x\0
 481  * MAC=x:x:x:x:x:x\0
 482  * PT:ddd mmm xx xx:xx:xx xx\0
 483  * PV:ddd mmm xx xx:xx:xx xx\0
 484  */
 485 static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 486 {
 487         char *ptr, *limit;
 488         int i;
 489
 490         ptr = mgp->eeprom_strings;
 491         limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 492
 493         while (*ptr != '\0' && ptr < limit) {
 494                 if (memcmp(ptr, "MAC=", 4) == 0) {
 495                         ptr += 4;
 496                         mgp->mac_addr_string = ptr;
 497                         for (i = 0; i < 6; i++) {
 498                                 if ((ptr + 2) > limit)
 499                                         goto abort;
 500                                 mgp->mac_addr[i] =
 501                                     simple_strtoul(ptr, &ptr, 16);
 502                                 ptr += 1;
 503                         }
 504                 }
 505                 if (memcmp(ptr, "PC=", 3) == 0) {
 506                         ptr += 3;
 507                         mgp->product_code_string = ptr;
 508                 }
 509                 if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 510                         ptr += 3;
 511                         mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 512                 }
 513                 while (ptr < limit && *ptr++) ;
 514         }
 515
 516         return 0;
 517
 518 abort:
 519         dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 520         return -ENXIO;
 521 }
 522
 523 /*
 524  * Enable or disable periodic RDMAs from the host to make certain
 525  * chipsets resend dropped PCIe messages
 526  */
 527
 528 static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 529 {
 530         char __iomem *submit;
 531         __be32 buf[16] __attribute__ ((__aligned__(8)));
 532         u32 dma_low, dma_high;
 533         int i;
 534
 535         /* clear confirmation addr */
 536         mgp->cmd->data = 0;
 537         mb();
 538
 539         /* send a rdma command to the PCIe engine, and wait for the
 540          * response in the confirmation address.  The firmware should
 541          * write a -1 there to indicate it is alive and well
 542          */
 543         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 544         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 545
 546         buf[0] = htonl(dma_high);       /* confirm addr MSW */
 547         buf[1] = htonl(dma_low);        /* confirm addr LSW */
 548         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 549         buf[3] = htonl(dma_high);       /* dummy addr MSW */
 550         buf[4] = htonl(dma_low);        /* dummy addr LSW */
 551         buf[5] = htonl(enable); /* enable? */
 552
 553         submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 554
 555         myri10ge_pio_copy(submit, &buf, sizeof(buf));
 556         for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 557                 msleep(1);
 558         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 559                 dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 560                         (enable ? "enable" : "disable"));
 561 }
 562
 563 static int
 564 myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 565                            struct mcp_gen_header *hdr)
 566 {
 567         struct device *dev = &mgp->pdev->dev;
 568
 569         /* check firmware type */
 570         if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 571                 dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 572                 return -EINVAL;
 573         }
 574
 575         /* save firmware version for ethtool */
 576         strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 577
 578         sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 579                &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 580
 581         if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
 582               mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 583                 dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 584                 dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 585                         MXGEFW_VERSION_MINOR);
 586                 return -EINVAL;
 587         }
 588         return 0;
 589 }
 590
 591 static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 592 {
 593         unsigned crc, reread_crc;
 594         const struct firmware *fw;
 595         struct device *dev = &mgp->pdev->dev;
 596         unsigned char *fw_readback;
 597         struct mcp_gen_header *hdr;
 598         size_t hdr_offset;
 599         int status;
 600         unsigned i;
 601
 602         if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 603                 dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 604                         mgp->fw_name);
 605                 status = -EINVAL;
 606                 goto abort_with_nothing;
 607         }
 608
 609         /* check size */
 610
 611         if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 612             fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 613                 dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 614                 status = -EINVAL;
 615                 goto abort_with_fw;
 616         }
 617
 618         /* check id */
 619         hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 620         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 621                 dev_err(dev, "Bad firmware file\n");
 622                 status = -EINVAL;
 623                 goto abort_with_fw;
 624         }
 625         hdr = (void *)(fw->data + hdr_offset);
 626
 627         status = myri10ge_validate_firmware(mgp, hdr);
 628         if (status != 0)
 629                 goto abort_with_fw;
 630
 631         crc = crc32(~0, fw->data, fw->size);
 632         for (i = 0; i < fw->size; i += 256) {
 633                 myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 634                                   fw->data + i,
 635                                   min(256U, (unsigned)(fw->size - i)));
 636                 mb();
 637                 readb(mgp->sram);
 638         }
 639         fw_readback = vmalloc(fw->size);
 640         if (!fw_readback) {
 641                 status = -ENOMEM;
 642                 goto abort_with_fw;
 643         }
 644         /* corruption checking is good for parity recovery and buggy chipset */
 645         memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 646         reread_crc = crc32(~0, fw_readback, fw->size);
 647         vfree(fw_readback);
 648         if (crc != reread_crc) {
 649                 dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 650                         (unsigned)fw->size, reread_crc, crc);
 651                 status = -EIO;
 652                 goto abort_with_fw;
 653         }
 654         *size = (u32) fw->size;
 655
 656 abort_with_fw:
 657         release_firmware(fw);
 658
 659 abort_with_nothing:
 660         return status;
 661 }
 662
 663 static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 664 {
 665         struct mcp_gen_header *hdr;
 666         struct device *dev = &mgp->pdev->dev;
 667         const size_t bytes = sizeof(struct mcp_gen_header);
 668         size_t hdr_offset;
 669         int status;
 670
 671         /* find running firmware header */
 672         hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 673
 674         if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 675                 dev_err(dev, "Running firmware has bad header offset (%d)\n",
 676                         (int)hdr_offset);
 677                 return -EIO;
 678         }
 679
 680         /* copy header of running firmware from SRAM to host memory to
 681          * validate firmware */
 682         hdr = kmalloc(bytes, GFP_KERNEL);
 683         if (hdr == NULL)
 684                 return -ENOMEM;
 685
 686         memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 687         status = myri10ge_validate_firmware(mgp, hdr);
 688         kfree(hdr);
 689
 690         /* check to see if adopted firmware has bug where adopting
 691          * it will cause broadcasts to be filtered unless the NIC
 692          * is kept in ALLMULTI mode */
 693         if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 694             mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 695                 mgp->adopted_rx_filter_bug = 1;
 696                 dev_warn(dev, "Adopting fw %d.%d.%d: "
 697                          "working around rx filter bug\n",
 698                          mgp->fw_ver_major, mgp->fw_ver_minor,
 699                          mgp->fw_ver_tiny);
 700         }
 701         return status;
 702 }
 703
 704 static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 705 {
 706         struct myri10ge_cmd cmd;
 707         int status;
 708
 709         /* probe for IPv6 TSO support */
 710         mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 711         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 712                                    &cmd, 0);
 713         if (status == 0) {
 714                 mgp->max_tso6 = cmd.data0;
 715                 mgp->features |= NETIF_F_TSO6;
 716         }
 717
 718         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 719         if (status != 0) {
 720                 dev_err(&mgp->pdev->dev,
 721                         "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 722                 return -ENXIO;
 723         }
 724
 725         mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 726
 727         return 0;
 728 }
 729
 730 static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 731 {
 732         char __iomem *submit;
 733         __be32 buf[16] __attribute__ ((__aligned__(8)));
 734         u32 dma_low, dma_high, size;
 735         int status, i;
 736
 737         size = 0;
 738         status = myri10ge_load_hotplug_firmware(mgp, &size);
 739         if (status) {
 740                 if (!adopt)
 741                         return status;
 742                 dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 743
 744                 /* Do not attempt to adopt firmware if there
 745                  * was a bad crc */
 746                 if (status == -EIO)
 747                         return status;
 748
 749                 status = myri10ge_adopt_running_firmware(mgp);
 750                 if (status != 0) {
 751                         dev_err(&mgp->pdev->dev,
 752                                 "failed to adopt running firmware\n");
 753                         return status;
 754                 }
 755                 dev_info(&mgp->pdev->dev,
 756                          "Successfully adopted running firmware\n");
 757                 if (mgp->tx_boundary == 4096) {
 758                         dev_warn(&mgp->pdev->dev,
 759                                  "Using firmware currently running on NIC"
 760                                  ".  For optimal\n");
 761                         dev_warn(&mgp->pdev->dev,
 762                                  "performance consider loading optimized "
 763                                  "firmware\n");
 764                         dev_warn(&mgp->pdev->dev, "via hotplug\n");
 765                 }
 766
 767                 set_fw_name(mgp, "adopted", false);
 768                 mgp->tx_boundary = 2048;
 769                 myri10ge_dummy_rdma(mgp, 1);
 770                 status = myri10ge_get_firmware_capabilities(mgp);
 771                 return status;
 772         }
 773
 774         /* clear confirmation addr */
 775         mgp->cmd->data = 0;
 776         mb();
 777
 778         /* send a reload command to the bootstrap MCP, and wait for the
 779          *  response in the confirmation address.  The firmware should
 780          * write a -1 there to indicate it is alive and well
 781          */
 782         dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 783         dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 784
 785         buf[0] = htonl(dma_high);       /* confirm addr MSW */
 786         buf[1] = htonl(dma_low);        /* confirm addr LSW */
 787         buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 788
 789         /* FIX: All newest firmware should un-protect the bottom of
 790          * the sram before handoff. However, the very first interfaces
 791          * do not. Therefore the handoff copy must skip the first 8 bytes
 792          */
 793         buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 794         buf[4] = htonl(size - 8);       /* length of code */
 795         buf[5] = htonl(8);      /* where to copy to */
 796         buf[6] = htonl(0);      /* where to jump to */
 797
 798         submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 799
 800         myri10ge_pio_copy(submit, &buf, sizeof(buf));
 801         mb();
 802         msleep(1);
 803         mb();
 804         i = 0;
 805         while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 806                 msleep(1 << i);
 807                 i++;
 808         }
 809         if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 810                 dev_err(&mgp->pdev->dev, "handoff failed\n");
 811                 return -ENXIO;
 812         }
 813         myri10ge_dummy_rdma(mgp, 1);
 814         status = myri10ge_get_firmware_capabilities(mgp);
 815
 816         return status;
 817 }
 818
 819 static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 820 {
 821         struct myri10ge_cmd cmd;
 822         int status;
 823
 824         cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 825                      | (addr[2] << 8) | addr[3]);
 826
 827         cmd.data1 = ((addr[4] << 8) | (addr[5]));
 828
 829         status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 830         return status;
 831 }
 832
 833 static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 834 {
 835         struct myri10ge_cmd cmd;
 836         int status, ctl;
 837
 838         ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 839         status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 840
 841         if (status) {
 842                 netdev_err(mgp->dev, "Failed to set flow control mode\n");
 843                 return status;
 844         }
 845         mgp->pause = pause;
 846         return 0;
 847 }
 848
 849 static void
 850 myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 851 {
 852         struct myri10ge_cmd cmd;
 853         int status, ctl;
 854
 855         ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 856         status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 857         if (status)
 858                 netdev_err(mgp->dev, "Failed to set promisc mode\n");
 859 }
 860
 861 static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 862 {
 863         struct myri10ge_cmd cmd;
 864         int status;
 865         u32 len;
 866         struct page *dmatest_page;
 867         dma_addr_t dmatest_bus;
 868         char *test = " ";
 869
 870         dmatest_page = alloc_page(GFP_KERNEL);
 871         if (!dmatest_page)
 872                 return -ENOMEM;
 873         dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 874                                    DMA_BIDIRECTIONAL);
 875
 876         /* Run a small DMA test.
 877          * The magic multipliers to the length tell the firmware
 878          * to do DMA read, write, or read+write tests.  The
 879          * results are returned in cmd.data0.  The upper 16
 880          * bits or the return is the number of transfers completed.
 881          * The lower 16 bits is the time in 0.5us ticks that the
 882          * transfers took to complete.
 883          */
 884
 885         len = mgp->tx_boundary;
 886
 887         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 888         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 889         cmd.data2 = len * 0x10000;
 890         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 891         if (status != 0) {
 892                 test = "read";
 893                 goto abort;
 894         }
 895         mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 896         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 897         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 898         cmd.data2 = len * 0x1;
 899         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 900         if (status != 0) {
 901                 test = "write";
 902                 goto abort;
 903         }
 904         mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 905
 906         cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 907         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 908         cmd.data2 = len * 0x10001;
 909         status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 910         if (status != 0) {
 911                 test = "read/write";
 912                 goto abort;
 913         }
 914         mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 915             (cmd.data0 & 0xffff);
 916
 917 abort:
 918         pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 919         put_page(dmatest_page);
 920
 921         if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 922                 dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 923                          test, status);
 924
 925         return status;
 926 }
 927
 928 #ifdef CONFIG_NET_RX_BUSY_POLL
 929 static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
 930 {
 931         spin_lock_init(&ss->lock);
 932         ss->state = SLICE_STATE_IDLE;
 933 }
 934
 935 static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
 936 {
 937         bool rc = true;
 938         spin_lock(&ss->lock);
 939         if ((ss->state & SLICE_LOCKED)) {
 940                 WARN_ON((ss->state & SLICE_STATE_NAPI));
 941                 ss->state |= SLICE_STATE_NAPI_YIELD;
 942                 rc = false;
 943                 ss->lock_napi_yield++;
 944         } else
 945                 ss->state = SLICE_STATE_NAPI;
 946         spin_unlock(&ss->lock);
 947         return rc;
 948 }
 949
 950 static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
 951 {
 952         spin_lock(&ss->lock);
 953         WARN_ON((ss->state & (SLICE_STATE_POLL | SLICE_STATE_NAPI_YIELD)));
 954         ss->state = SLICE_STATE_IDLE;
 955         spin_unlock(&ss->lock);
 956 }
 957
 958 static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
 959 {
 960         bool rc = true;
 961         spin_lock_bh(&ss->lock);
 962         if ((ss->state & SLICE_LOCKED)) {
 963                 ss->state |= SLICE_STATE_POLL_YIELD;
 964                 rc = false;
 965                 ss->lock_poll_yield++;
 966         } else
 967                 ss->state |= SLICE_STATE_POLL;
 968         spin_unlock_bh(&ss->lock);
 969         return rc;
 970 }
 971
 972 static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
 973 {
 974         spin_lock_bh(&ss->lock);
 975         WARN_ON((ss->state & SLICE_STATE_NAPI));
 976         ss->state = SLICE_STATE_IDLE;
 977         spin_unlock_bh(&ss->lock);
 978 }
 979
 980 static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
 981 {
 982         WARN_ON(!(ss->state & SLICE_LOCKED));
 983         return (ss->state & SLICE_USER_PEND);
 984 }
 985 #else /* CONFIG_NET_RX_BUSY_POLL */
 986 static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
 987 {
 988 }
 989
 990 static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
 991 {
 992         return false;
 993 }
 994
 995 static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
 996 {
 997 }
 998
 999 static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
1000 {
1001         return false;
1002 }
1003
1004 static inline void myri10ge_ss_unlock_poll(struct myri10ge_slice_state *ss)
1005 {
1006 }
1007
1008 static inline bool myri10ge_ss_busy_polling(struct myri10ge_slice_state *ss)
1009 {
1010         return false;
1011 }
1012 #endif
1013
1014 static int myri10ge_reset(struct myri10ge_priv *mgp)
1015 {
1016         struct myri10ge_cmd cmd;
1017         struct myri10ge_slice_state *ss;
1018         int i, status;
1019         size_t bytes;
1020 #ifdef CONFIG_MYRI10GE_DCA
1021         unsigned long dca_tag_off;
1022 #endif
1023
1024         /* try to send a reset command to the card to see if it
1025          * is alive */
1026         memset(&cmd, 0, sizeof(cmd));
1027         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
1028         if (status != 0) {
1029                 dev_err(&mgp->pdev->dev, "failed reset\n");
1030                 return -ENXIO;
1031         }
1032
1033         (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
1034         /*
1035          * Use non-ndis mcp_slot (eg, 4 bytes total,
1036          * no toeplitz hash value returned.  Older firmware will
1037          * not understand this command, but will use the correct
1038          * sized mcp_slot, so we ignore error returns
1039          */
1040         cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
1041         (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
1042
1043         /* Now exchange information about interrupts  */
1044
1045         bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
1046         cmd.data0 = (u32) bytes;
1047         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
1048
1049         /*
1050          * Even though we already know how many slices are supported
1051          * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
1052          * has magic side effects, and must be called after a reset.
1053          * It must be called prior to calling any RSS related cmds,
1054          * including assigning an interrupt queue for anything but
1055          * slice 0.  It must also be called *after*
1056          * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
1057          * the firmware to compute offsets.
1058          */
1059
1060         if (mgp->num_slices > 1) {
1061
1062                 /* ask the maximum number of slices it supports */
1063                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
1064                                            &cmd, 0);
1065                 if (status != 0) {
1066                         dev_err(&mgp->pdev->dev,
1067                                 "failed to get number of slices\n");
1068                 }
1069
1070                 /*
1071                  * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
1072                  * to setting up the interrupt queue DMA
1073                  */
1074
1075                 cmd.data0 = mgp->num_slices;
1076                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
1077                 if (mgp->dev->real_num_tx_queues > 1)
1078                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
1079                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
1080                                            &cmd, 0);
1081
1082                 /* Firmware older than 1.4.32 only supports multiple
1083                  * RX queues, so if we get an error, first retry using a
1084                  * single TX queue before giving up */
1085                 if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
1086                         netif_set_real_num_tx_queues(mgp->dev, 1);
1087                         cmd.data0 = mgp->num_slices;
1088                         cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
1089                         status = myri10ge_send_cmd(mgp,
1090                                                    MXGEFW_CMD_ENABLE_RSS_QUEUES,
1091                                                    &cmd, 0);
1092                 }
1093
1094                 if (status != 0) {
1095                         dev_err(&mgp->pdev->dev,
1096                                 "failed to set number of slices\n");
1097
1098                         return status;
1099                 }
1100         }
1101         for (i = 0; i < mgp->num_slices; i++) {
1102                 ss = &mgp->ss[i];
1103                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
1104                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
1105                 cmd.data2 = i;
1106                 status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1107                                             &cmd, 0);
1108         }
1109
1110         status |=
1111             myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1112         for (i = 0; i < mgp->num_slices; i++) {
1113                 ss = &mgp->ss[i];
1114                 ss->irq_claim =
1115                     (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1116         }
1117         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1118                                     &cmd, 0);
1119         mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1120
1121         status |= myri10ge_send_cmd
1122             (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1123         mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1124         if (status != 0) {
1125                 dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1126                 return status;
1127         }
1128         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1129
1130 #ifdef CONFIG_MYRI10GE_DCA
1131         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1132         dca_tag_off = cmd.data0;
1133         for (i = 0; i < mgp->num_slices; i++) {
1134                 ss = &mgp->ss[i];
1135                 if (status == 0) {
1136                         ss->dca_tag = (__iomem __be32 *)
1137                             (mgp->sram + dca_tag_off + 4 * i);
1138                 } else {
1139                         ss->dca_tag = NULL;
1140                 }
1141         }
1142 #endif                          /* CONFIG_MYRI10GE_DCA */
1143
1144         /* reset mcp/driver shared state back to 0 */
1145
1146         mgp->link_changes = 0;
1147         for (i = 0; i < mgp->num_slices; i++) {
1148                 ss = &mgp->ss[i];
1149
1150                 memset(ss->rx_done.entry, 0, bytes);
1151                 ss->tx.req = 0;
1152                 ss->tx.done = 0;
1153                 ss->tx.pkt_start = 0;
1154                 ss->tx.pkt_done = 0;
1155                 ss->rx_big.cnt = 0;
1156                 ss->rx_small.cnt = 0;
1157                 ss->rx_done.idx = 0;
1158                 ss->rx_done.cnt = 0;
1159                 ss->tx.wake_queue = 0;
1160                 ss->tx.stop_queue = 0;
1161         }
1162
1163         status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1164         myri10ge_change_pause(mgp, mgp->pause);
1165         myri10ge_set_multicast_list(mgp->dev);
1166         return status;
1167 }
1168
1169 #ifdef CONFIG_MYRI10GE_DCA
1170 static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
1171 {
1172         int ret;
1173         u16 ctl;
1174
1175         pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
1176
1177         ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
1178         if (ret != on) {
1179                 ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
1180                 ctl |= (on << 4);
1181                 pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
1182         }
1183         return ret;
1184 }
1185
1186 static void
1187 myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1188 {
1189         ss->cached_dca_tag = tag;
1190         put_be32(htonl(tag), ss->dca_tag);
1191 }
1192
1193 static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1194 {
1195         int cpu = get_cpu();
1196         int tag;
1197
1198         if (cpu != ss->cpu) {
1199                 tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
1200                 if (ss->cached_dca_tag != tag)
1201                         myri10ge_write_dca(ss, cpu, tag);
1202                 ss->cpu = cpu;
1203         }
1204         put_cpu();
1205 }
1206
1207 static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1208 {
1209         int err, i;
1210         struct pci_dev *pdev = mgp->pdev;
1211
1212         if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1213                 return;
1214         if (!myri10ge_dca) {
1215                 dev_err(&pdev->dev, "dca disabled by administrator\n");
1216                 return;
1217         }
1218         err = dca_add_requester(&pdev->dev);
1219         if (err) {
1220                 if (err != -ENODEV)
1221                         dev_err(&pdev->dev,
1222                                 "dca_add_requester() failed, err=%d\n", err);
1223                 return;
1224         }
1225         mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
1226         mgp->dca_enabled = 1;
1227         for (i = 0; i < mgp->num_slices; i++) {
1228                 mgp->ss[i].cpu = -1;
1229                 mgp->ss[i].cached_dca_tag = -1;
1230                 myri10ge_update_dca(&mgp->ss[i]);
1231         }
1232 }
1233
1234 static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1235 {
1236         struct pci_dev *pdev = mgp->pdev;
1237
1238         if (!mgp->dca_enabled)
1239                 return;
1240         mgp->dca_enabled = 0;
1241         if (mgp->relaxed_order)
1242                 myri10ge_toggle_relaxed(pdev, 1);
1243         dca_remove_requester(&pdev->dev);
1244 }
1245
1246 static int myri10ge_notify_dca_device(struct device *dev, void *data)
1247 {
1248         struct myri10ge_priv *mgp;
1249         unsigned long event;
1250
1251         mgp = dev_get_drvdata(dev);
1252         event = *(unsigned long *)data;
1253
1254         if (event == DCA_PROVIDER_ADD)
1255                 myri10ge_setup_dca(mgp);
1256         else if (event == DCA_PROVIDER_REMOVE)
1257                 myri10ge_teardown_dca(mgp);
1258         return 0;
1259 }
1260 #endif                          /* CONFIG_MYRI10GE_DCA */
1261
1262 static inline void
1263 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1264                     struct mcp_kreq_ether_recv *src)
1265 {
1266         __be32 low;
1267
1268         low = src->addr_low;
1269         src->addr_low = htonl(DMA_BIT_MASK(32));
1270         myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1271         mb();
1272         myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1273         mb();
1274         src->addr_low = low;
1275         put_be32(low, &dst->addr_low);
1276         mb();
1277 }
1278
1279 static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1280 {
1281         struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1282
1283         if ((skb->protocol == htons(ETH_P_8021Q)) &&
1284             (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1285              vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1286                 skb->csum = hw_csum;
1287                 skb->ip_summed = CHECKSUM_COMPLETE;
1288         }
1289 }
1290
1291 static void
1292 myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1293                         int bytes, int watchdog)
1294 {
1295         struct page *page;
1296         int idx;
1297 #if MYRI10GE_ALLOC_SIZE > 4096
1298         int end_offset;
1299 #endif
1300
1301         if (unlikely(rx->watchdog_needed && !watchdog))
1302                 return;
1303
1304         /* try to refill entire ring */
1305         while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1306                 idx = rx->fill_cnt & rx->mask;
1307                 if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1308                         /* we can use part of previous page */
1309                         get_page(rx->page);
1310                 } else {
1311                         /* we need a new page */
1312                         page =
1313                             alloc_pages(GFP_ATOMIC | __GFP_COMP,
1314                                         MYRI10GE_ALLOC_ORDER);
1315                         if (unlikely(page == NULL)) {
1316                                 if (rx->fill_cnt - rx->cnt < 16)
1317                                         rx->watchdog_needed = 1;
1318                                 return;
1319                         }
1320                         rx->page = page;
1321                         rx->page_offset = 0;
1322                         rx->bus = pci_map_page(mgp->pdev, page, 0,
1323                                                MYRI10GE_ALLOC_SIZE,
1324                                                PCI_DMA_FROMDEVICE);
1325                 }
1326                 rx->info[idx].page = rx->page;
1327                 rx->info[idx].page_offset = rx->page_offset;
1328                 /* note that this is the address of the start of the
1329                  * page */
1330                 dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1331                 rx->shadow[idx].addr_low =
1332                     htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1333                 rx->shadow[idx].addr_high =
1334                     htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1335
1336                 /* start next packet on a cacheline boundary */
1337                 rx->page_offset += SKB_DATA_ALIGN(bytes);
1338
1339 #if MYRI10GE_ALLOC_SIZE > 4096
1340                 /* don't cross a 4KB boundary */
1341                 end_offset = rx->page_offset + bytes - 1;
1342                 if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
1343                         rx->page_offset = end_offset & ~4095;
1344 #endif
1345                 rx->fill_cnt++;
1346
1347                 /* copy 8 descriptors to the firmware at a time */
1348                 if ((idx & 7) == 7) {
1349                         myri10ge_submit_8rx(&rx->lanai[idx - 7],
1350                                             &rx->shadow[idx - 7]);
1351                 }
1352         }
1353 }
1354
1355 static inline void
1356 myri10ge_unmap_rx_page(struct pci_dev *pdev,
1357                        struct myri10ge_rx_buffer_state *info, int bytes)
1358 {
1359         /* unmap the recvd page if we're the only or last user of it */
1360         if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1361             (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1362                 pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
1363                                       & ~(MYRI10GE_ALLOC_SIZE - 1)),
1364                                MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1365         }
1366 }
1367
1368 /*
1369  * GRO does not support acceleration of tagged vlan frames, and
1370  * this NIC does not support vlan tag offload, so we must pop
1371  * the tag ourselves to be able to achieve GRO performance that
1372  * is comparable to LRO.
1373  */
1374
1375 static inline void
1376 myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
1377 {
1378         u8 *va;
1379         struct vlan_ethhdr *veh;
1380         struct skb_frag_struct *frag;
1381         __wsum vsum;
1382
1383         va = addr;
1384         va += MXGEFW_PAD;
1385         veh = (struct vlan_ethhdr *)va;
1386         if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) ==
1387             NETIF_F_HW_VLAN_CTAG_RX &&
1388             veh->h_vlan_proto == htons(ETH_P_8021Q)) {
1389                 /* fixup csum if needed */
1390                 if (skb->ip_summed == CHECKSUM_COMPLETE) {
1391                         vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
1392                         skb->csum = csum_sub(skb->csum, vsum);
1393                 }
1394                 /* pop tag */
1395                 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(veh->h_vlan_TCI));
1396                 memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
1397                 skb->len -= VLAN_HLEN;
1398                 skb->data_len -= VLAN_HLEN;
1399                 frag = skb_shinfo(skb)->frags;
1400                 frag->page_offset += VLAN_HLEN;
1401                 skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
1402         }
1403 }
1404
1405 #define MYRI10GE_HLEN 64 /* Bytes to copy from page to skb linear memory */
1406
1407 static inline int
1408 myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
1409 {
1410         struct myri10ge_priv *mgp = ss->mgp;
1411         struct sk_buff *skb;
1412         struct skb_frag_struct *rx_frags;
1413         struct myri10ge_rx_buf *rx;
1414         int i, idx, remainder, bytes;
1415         struct pci_dev *pdev = mgp->pdev;
1416         struct net_device *dev = mgp->dev;
1417         u8 *va;
1418         bool polling;
1419
1420         if (len <= mgp->small_bytes) {
1421                 rx = &ss->rx_small;
1422                 bytes = mgp->small_bytes;
1423         } else {
1424                 rx = &ss->rx_big;
1425                 bytes = mgp->big_bytes;
1426         }
1427
1428         len += MXGEFW_PAD;
1429         idx = rx->cnt & rx->mask;
1430         va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1431         prefetch(va);
1432
1433         /* When busy polling in user context, allocate skb and copy headers to
1434          * skb's linear memory ourselves.  When not busy polling, use the napi
1435          * gro api.
1436          */
1437         polling = myri10ge_ss_busy_polling(ss);
1438         if (polling)
1439                 skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
1440         else
1441                 skb = napi_get_frags(&ss->napi);
1442         if (unlikely(skb == NULL)) {
1443                 ss->stats.rx_dropped++;
1444                 for (i = 0, remainder = len; remainder > 0; i++) {
1445                         myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1446                         put_page(rx->info[idx].page);
1447                         rx->cnt++;
1448                         idx = rx->cnt & rx->mask;
1449                         remainder -= MYRI10GE_ALLOC_SIZE;
1450                 }
1451                 return 0;
1452         }
1453         rx_frags = skb_shinfo(skb)->frags;
1454         /* Fill skb_frag_struct(s) with data from our receive */
1455         for (i = 0, remainder = len; remainder > 0; i++) {
1456                 myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1457                 skb_fill_page_desc(skb, i, rx->info[idx].page,
1458                                    rx->info[idx].page_offset,
1459                                    remainder < MYRI10GE_ALLOC_SIZE ?
1460                                    remainder : MYRI10GE_ALLOC_SIZE);
1461                 rx->cnt++;
1462                 idx = rx->cnt & rx->mask;
1463                 remainder -= MYRI10GE_ALLOC_SIZE;
1464         }
1465
1466         /* remove padding */
1467         rx_frags[0].page_offset += MXGEFW_PAD;
1468         rx_frags[0].size -= MXGEFW_PAD;
1469         len -= MXGEFW_PAD;
1470
1471         skb->len = len;
1472         skb->data_len = len;
1473         skb->truesize += len;
1474         if (dev->features & NETIF_F_RXCSUM) {
1475                 skb->ip_summed = CHECKSUM_COMPLETE;
1476                 skb->csum = csum;
1477         }
1478         myri10ge_vlan_rx(mgp->dev, va, skb);
1479         skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1480         skb_mark_napi_id(skb, &ss->napi);
1481
1482         if (polling) {
1483                 int hlen;
1484
1485                 /* myri10ge_vlan_rx might have moved the header, so compute
1486                  * length and address again.
1487                  */
1488                 hlen = MYRI10GE_HLEN > skb->len ? skb->len : MYRI10GE_HLEN;
1489                 va = page_address(skb_frag_page(&rx_frags[0])) +
1490                         rx_frags[0].page_offset;
1491                 /* Copy header into the skb linear memory */
1492                 skb_copy_to_linear_data(skb, va, hlen);
1493                 rx_frags[0].page_offset += hlen;
1494                 rx_frags[0].size -= hlen;
1495                 skb->data_len -= hlen;
1496                 skb->tail += hlen;
1497                 skb->protocol = eth_type_trans(skb, dev);
1498                 netif_receive_skb(skb);
1499         }
1500         else
1501                 napi_gro_frags(&ss->napi);
1502
1503         return 1;
1504 }
1505
1506 static inline void
1507 myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1508 {
1509         struct pci_dev *pdev = ss->mgp->pdev;
1510         struct myri10ge_tx_buf *tx = &ss->tx;
1511         struct netdev_queue *dev_queue;
1512         struct sk_buff *skb;
1513         int idx, len;
1514
1515         while (tx->pkt_done != mcp_index) {
1516                 idx = tx->done & tx->mask;
1517                 skb = tx->info[idx].skb;
1518
1519                 /* Mark as free */
1520                 tx->info[idx].skb = NULL;
1521                 if (tx->info[idx].last) {
1522                         tx->pkt_done++;
1523                         tx->info[idx].last = 0;
1524                 }
1525                 tx->done++;
1526                 len = dma_unmap_len(&tx->info[idx], len);
1527                 dma_unmap_len_set(&tx->info[idx], len, 0);
1528                 if (skb) {
1529                         ss->stats.tx_bytes += skb->len;
1530                         ss->stats.tx_packets++;
1531                         dev_kfree_skb_irq(skb);
1532                         if (len)
1533                                 pci_unmap_single(pdev,
1534                                                  dma_unmap_addr(&tx->info[idx],
1535                                                                 bus), len,
1536                                                  PCI_DMA_TODEVICE);
1537                 } else {
1538                         if (len)
1539                                 pci_unmap_page(pdev,
1540                                                dma_unmap_addr(&tx->info[idx],
1541                                                               bus), len,
1542                                                PCI_DMA_TODEVICE);
1543                 }
1544         }
1545
1546         dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1547         /*
1548          * Make a minimal effort to prevent the NIC from polling an
1549          * idle tx queue.  If we can't get the lock we leave the queue
1550          * active. In this case, either a thread was about to start
1551          * using the queue anyway, or we lost a race and the NIC will
1552          * waste some of its resources polling an inactive queue for a
1553          * while.
1554          */
1555
1556         if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1557             __netif_tx_trylock(dev_queue)) {
1558                 if (tx->req == tx->done) {
1559                         tx->queue_active = 0;
1560                         put_be32(htonl(1), tx->send_stop);
1561                         mb();
1562                         mmiowb();
1563                 }
1564                 __netif_tx_unlock(dev_queue);
1565         }
1566
1567         /* start the queue if we've stopped it */
1568         if (netif_tx_queue_stopped(dev_queue) &&
1569             tx->req - tx->done < (tx->mask >> 1) &&
1570             ss->mgp->running == MYRI10GE_ETH_RUNNING) {
1571                 tx->wake_queue++;
1572                 netif_tx_wake_queue(dev_queue);
1573         }
1574 }
1575
1576 static inline int
1577 myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1578 {
1579         struct myri10ge_rx_done *rx_done = &ss->rx_done;
1580         struct myri10ge_priv *mgp = ss->mgp;
1581         unsigned long rx_bytes = 0;
1582         unsigned long rx_packets = 0;
1583         unsigned long rx_ok;
1584         int idx = rx_done->idx;
1585         int cnt = rx_done->cnt;
1586         int work_done = 0;
1587         u16 length;
1588         __wsum checksum;
1589
1590         while (rx_done->entry[idx].length != 0 && work_done < budget) {
1591                 length = ntohs(rx_done->entry[idx].length);
1592                 rx_done->entry[idx].length = 0;
1593                 checksum = csum_unfold(rx_done->entry[idx].checksum);
1594                 rx_ok = myri10ge_rx_done(ss, length, checksum);
1595                 rx_packets += rx_ok;
1596                 rx_bytes += rx_ok * (unsigned long)length;
1597                 cnt++;
1598                 idx = cnt & (mgp->max_intr_slots - 1);
1599                 work_done++;
1600         }
1601         rx_done->idx = idx;
1602         rx_done->cnt = cnt;
1603         ss->stats.rx_packets += rx_packets;
1604         ss->stats.rx_bytes += rx_bytes;
1605
1606         /* restock receive rings if needed */
1607         if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1608                 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1609                                         mgp->small_bytes + MXGEFW_PAD, 0);
1610         if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1611                 myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1612
1613         return work_done;
1614 }
1615
1616 static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1617 {
1618         struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1619
1620         if (unlikely(stats->stats_updated)) {
1621                 unsigned link_up = ntohl(stats->link_up);
1622                 if (mgp->link_state != link_up) {
1623                         mgp->link_state = link_up;
1624
1625                         if (mgp->link_state == MXGEFW_LINK_UP) {
1626                                 netif_info(mgp, link, mgp->dev, "link up\n");
1627                                 netif_carrier_on(mgp->dev);
1628                                 mgp->link_changes++;
1629                         } else {
1630                                 netif_info(mgp, link, mgp->dev, "link %s\n",
1631                                            (link_up == MXGEFW_LINK_MYRINET ?
1632                                             "mismatch (Myrinet detected)" :
1633                                             "down"));
1634                                 netif_carrier_off(mgp->dev);
1635                                 mgp->link_changes++;
1636                         }
1637                 }
1638                 if (mgp->rdma_tags_available !=
1639                     ntohl(stats->rdma_tags_available)) {
1640                         mgp->rdma_tags_available =
1641                             ntohl(stats->rdma_tags_available);
1642                         netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
1643                                     mgp->rdma_tags_available);
1644                 }
1645                 mgp->down_cnt += stats->link_down;
1646                 if (stats->link_down)
1647                         wake_up(&mgp->down_wq);
1648         }
1649 }
1650
1651 static int myri10ge_poll(struct napi_struct *napi, int budget)
1652 {
1653         struct myri10ge_slice_state *ss =
1654             container_of(napi, struct myri10ge_slice_state, napi);
1655         int work_done;
1656
1657 #ifdef CONFIG_MYRI10GE_DCA
1658         if (ss->mgp->dca_enabled)
1659                 myri10ge_update_dca(ss);
1660 #endif
1661         /* Try later if the busy_poll handler is running. */
1662         if (!myri10ge_ss_lock_napi(ss))
1663                 return budget;
1664
1665         /* process as many rx events as NAPI will allow */
1666         work_done = myri10ge_clean_rx_done(ss, budget);
1667
1668         myri10ge_ss_unlock_napi(ss);
1669         if (work_done < budget) {
1670                 napi_complete(napi);
1671                 put_be32(htonl(3), ss->irq_claim);
1672         }
1673         return work_done;
1674 }
1675
1676 #ifdef CONFIG_NET_RX_BUSY_POLL
1677 static int myri10ge_busy_poll(struct napi_struct *napi)
1678 {
1679         struct myri10ge_slice_state *ss =
1680             container_of(napi, struct myri10ge_slice_state, napi);
1681         struct myri10ge_priv *mgp = ss->mgp;
1682         int work_done;
1683
1684         /* Poll only when the link is up */
1685         if (mgp->link_state != MXGEFW_LINK_UP)
1686                 return LL_FLUSH_FAILED;
1687
1688         if (!myri10ge_ss_lock_poll(ss))
1689                 return LL_FLUSH_BUSY;
1690
1691         /* Process a small number of packets */
1692         work_done = myri10ge_clean_rx_done(ss, 4);
1693         if (work_done)
1694                 ss->busy_poll_cnt += work_done;
1695         else
1696                 ss->busy_poll_miss++;
1697
1698         myri10ge_ss_unlock_poll(ss);
1699
1700         return work_done;
1701 }
1702 #endif /* CONFIG_NET_RX_BUSY_POLL */
1703
1704 static irqreturn_t myri10ge_intr(int irq, void *arg)
1705 {
1706         struct myri10ge_slice_state *ss = arg;
1707         struct myri10ge_priv *mgp = ss->mgp;
1708         struct mcp_irq_data *stats = ss->fw_stats;
1709         struct myri10ge_tx_buf *tx = &ss->tx;
1710         u32 send_done_count;
1711         int i;
1712
1713         /* an interrupt on a non-zero receive-only slice is implicitly
1714          * valid  since MSI-X irqs are not shared */
1715         if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1716                 napi_schedule(&ss->napi);
1717                 return IRQ_HANDLED;
1718         }
1719
1720         /* make sure it is our IRQ, and that the DMA has finished */
1721         if (unlikely(!stats->valid))
1722                 return IRQ_NONE;
1723
1724         /* low bit indicates receives are present, so schedule
1725          * napi poll handler */
1726         if (stats->valid & 1)
1727                 napi_schedule(&ss->napi);
1728
1729         if (!mgp->msi_enabled && !mgp->msix_enabled) {
1730                 put_be32(0, mgp->irq_deassert);
1731                 if (!myri10ge_deassert_wait)
1732                         stats->valid = 0;
1733                 mb();
1734         } else
1735                 stats->valid = 0;
1736
1737         /* Wait for IRQ line to go low, if using INTx */
1738         i = 0;
1739         while (1) {
1740                 i++;
1741                 /* check for transmit completes and receives */
1742                 send_done_count = ntohl(stats->send_done_count);
1743                 if (send_done_count != tx->pkt_done)
1744                         myri10ge_tx_done(ss, (int)send_done_count);
1745                 if (unlikely(i > myri10ge_max_irq_loops)) {
1746                         netdev_warn(mgp->dev, "irq stuck?\n");
1747                         stats->valid = 0;
1748                         schedule_work(&mgp->watchdog_work);
1749                 }
1750                 if (likely(stats->valid == 0))
1751                         break;
1752                 cpu_relax();
1753                 barrier();
1754         }
1755
1756         /* Only slice 0 updates stats */
1757         if (ss == mgp->ss)
1758                 myri10ge_check_statblock(mgp);
1759
1760         put_be32(htonl(3), ss->irq_claim + 1);
1761         return IRQ_HANDLED;
1762 }
1763
1764 static int
1765 myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1766 {
1767         struct myri10ge_priv *mgp = netdev_priv(netdev);
1768         char *ptr;
1769         int i;
1770
1771         cmd->autoneg = AUTONEG_DISABLE;
1772         ethtool_cmd_speed_set(cmd, SPEED_10000);
1773         cmd->duplex = DUPLEX_FULL;
1774
1775         /*
1776          * parse the product code to deterimine the interface type
1777          * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1778          * after the 3rd dash in the driver's cached copy of the
1779          * EEPROM's product code string.
1780          */
1781         ptr = mgp->product_code_string;
1782         if (ptr == NULL) {
1783                 netdev_err(netdev, "Missing product code\n");
1784                 return 0;
1785         }
1786         for (i = 0; i < 3; i++, ptr++) {
1787                 ptr = strchr(ptr, '-');
1788                 if (ptr == NULL) {
1789                         netdev_err(netdev, "Invalid product code %s\n",
1790                                    mgp->product_code_string);
1791                         return 0;
1792                 }
1793         }
1794         if (*ptr == '2')
1795                 ptr++;
1796         if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1797                 /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1798                 cmd->port = PORT_FIBRE;
1799                 cmd->supported |= SUPPORTED_FIBRE;
1800                 cmd->advertising |= ADVERTISED_FIBRE;
1801         } else {
1802                 cmd->port = PORT_OTHER;
1803         }
1804         if (*ptr == 'R' || *ptr == 'S')
1805                 cmd->transceiver = XCVR_EXTERNAL;
1806         else
1807                 cmd->transceiver = XCVR_INTERNAL;
1808
1809         return 0;
1810 }
1811
1812 static void
1813 myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1814 {
1815         struct myri10ge_priv *mgp = netdev_priv(netdev);
1816
1817         strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1818         strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1819         strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1820         strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1821 }
1822
1823 static int
1824 myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1825 {
1826         struct myri10ge_priv *mgp = netdev_priv(netdev);
1827
1828         coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1829         return 0;
1830 }
1831
1832 static int
1833 myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1834 {
1835         struct myri10ge_priv *mgp = netdev_priv(netdev);
1836
1837         mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1838         put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1839         return 0;
1840 }
1841
1842 static void
1843 myri10ge_get_pauseparam(struct net_device *netdev,
1844                         struct ethtool_pauseparam *pause)
1845 {
1846         struct myri10ge_priv *mgp = netdev_priv(netdev);
1847
1848         pause->autoneg = 0;
1849         pause->rx_pause = mgp->pause;
1850         pause->tx_pause = mgp->pause;
1851 }
1852
1853 static int
1854 myri10ge_set_pauseparam(struct net_device *netdev,
1855                         struct ethtool_pauseparam *pause)
1856 {
1857         struct myri10ge_priv *mgp = netdev_priv(netdev);
1858
1859         if (pause->tx_pause != mgp->pause)
1860                 return myri10ge_change_pause(mgp, pause->tx_pause);
1861         if (pause->rx_pause != mgp->pause)
1862                 return myri10ge_change_pause(mgp, pause->rx_pause);
1863         if (pause->autoneg != 0)
1864                 return -EINVAL;
1865         return 0;
1866 }
1867
1868 static void
1869 myri10ge_get_ringparam(struct net_device *netdev,
1870                        struct ethtool_ringparam *ring)
1871 {
1872         struct myri10ge_priv *mgp = netdev_priv(netdev);
1873
1874         ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1875         ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1876         ring->rx_jumbo_max_pending = 0;
1877         ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1878         ring->rx_mini_pending = ring->rx_mini_max_pending;
1879         ring->rx_pending = ring->rx_max_pending;
1880         ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1881         ring->tx_pending = ring->tx_max_pending;
1882 }
1883
1884 static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1885         "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1886         "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1887         "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1888         "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1889         "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1890         "tx_heartbeat_errors", "tx_window_errors",
1891         /* device-specific stats */
1892         "tx_boundary", "WC", "irq", "MSI", "MSIX",
1893         "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1894         "serial_number", "watchdog_resets",
1895 #ifdef CONFIG_MYRI10GE_DCA
1896         "dca_capable_firmware", "dca_device_present",
1897 #endif
1898         "link_changes", "link_up", "dropped_link_overflow",
1899         "dropped_link_error_or_filtered",
1900         "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1901         "dropped_unicast_filtered", "dropped_multicast_filtered",
1902         "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1903         "dropped_no_big_buffer"
1904 };
1905
1906 static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1907         "----------- slice ---------",
1908         "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1909         "rx_small_cnt", "rx_big_cnt",
1910         "wake_queue", "stop_queue", "tx_linearized",
1911 #ifdef CONFIG_NET_RX_BUSY_POLL
1912         "rx_lock_napi_yield", "rx_lock_poll_yield", "rx_busy_poll_miss",
1913         "rx_busy_poll_cnt",
1914 #endif
1915 };
1916
1917 #define MYRI10GE_NET_STATS_LEN      21
1918 #define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1919 #define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1920
1921 static void
1922 myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1923 {
1924         struct myri10ge_priv *mgp = netdev_priv(netdev);
1925         int i;
1926
1927         switch (stringset) {
1928         case ETH_SS_STATS:
1929                 memcpy(data, *myri10ge_gstrings_main_stats,
1930                        sizeof(myri10ge_gstrings_main_stats));
1931                 data += sizeof(myri10ge_gstrings_main_stats);
1932                 for (i = 0; i < mgp->num_slices; i++) {
1933                         memcpy(data, *myri10ge_gstrings_slice_stats,
1934                                sizeof(myri10ge_gstrings_slice_stats));
1935                         data += sizeof(myri10ge_gstrings_slice_stats);
1936                 }
1937                 break;
1938         }
1939 }
1940
1941 static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1942 {
1943         struct myri10ge_priv *mgp = netdev_priv(netdev);
1944
1945         switch (sset) {
1946         case ETH_SS_STATS:
1947                 return MYRI10GE_MAIN_STATS_LEN +
1948                     mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1949         default:
1950                 return -EOPNOTSUPP;
1951         }
1952 }
1953
1954 static void
1955 myri10ge_get_ethtool_stats(struct net_device *netdev,
1956                            struct ethtool_stats *stats, u64 * data)
1957 {
1958         struct myri10ge_priv *mgp = netdev_priv(netdev);
1959         struct myri10ge_slice_state *ss;
1960         struct rtnl_link_stats64 link_stats;
1961         int slice;
1962         int i;
1963
1964         /* force stats update */
1965         memset(&link_stats, 0, sizeof(link_stats));
1966         (void)myri10ge_get_stats(netdev, &link_stats);
1967         for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1968                 data[i] = ((u64 *)&link_stats)[i];
1969
1970         data[i++] = (unsigned int)mgp->tx_boundary;
1971         data[i++] = (unsigned int)mgp->wc_enabled;
1972         data[i++] = (unsigned int)mgp->pdev->irq;
1973         data[i++] = (unsigned int)mgp->msi_enabled;
1974         data[i++] = (unsigned int)mgp->msix_enabled;
1975         data[i++] = (unsigned int)mgp->read_dma;
1976         data[i++] = (unsigned int)mgp->write_dma;
1977         data[i++] = (unsigned int)mgp->read_write_dma;
1978         data[i++] = (unsigned int)mgp->serial_number;
1979         data[i++] = (unsigned int)mgp->watchdog_resets;
1980 #ifdef CONFIG_MYRI10GE_DCA
1981         data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1982         data[i++] = (unsigned int)(mgp->dca_enabled);
1983 #endif
1984         data[i++] = (unsigned int)mgp->link_changes;
1985
1986         /* firmware stats are useful only in the first slice */
1987         ss = &mgp->ss[0];
1988         data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1989         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1990         data[i++] =
1991             (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1992         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1993         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1994         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1995         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1996         data[i++] =
1997             (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1998         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1999         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
2000         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
2001         data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
2002
2003         for (slice = 0; slice < mgp->num_slices; slice++) {
2004                 ss = &mgp->ss[slice];
2005                 data[i++] = slice;
2006                 data[i++] = (unsigned int)ss->tx.pkt_start;
2007                 data[i++] = (unsigned int)ss->tx.pkt_done;
2008                 data[i++] = (unsigned int)ss->tx.req;
2009                 data[i++] = (unsigned int)ss->tx.done;
2010                 data[i++] = (unsigned int)ss->rx_small.cnt;
2011                 data[i++] = (unsigned int)ss->rx_big.cnt;
2012                 data[i++] = (unsigned int)ss->tx.wake_queue;
2013                 data[i++] = (unsigned int)ss->tx.stop_queue;
2014                 data[i++] = (unsigned int)ss->tx.linearized;
2015 #ifdef CONFIG_NET_RX_BUSY_POLL
2016                 data[i++] = ss->lock_napi_yield;
2017                 data[i++] = ss->lock_poll_yield;
2018                 data[i++] = ss->busy_poll_miss;
2019                 data[i++] = ss->busy_poll_cnt;
2020 #endif
2021         }
2022 }
2023
2024 static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
2025 {
2026         struct myri10ge_priv *mgp = netdev_priv(netdev);
2027         mgp->msg_enable = value;
2028 }
2029
2030 static u32 myri10ge_get_msglevel(struct net_device *netdev)
2031 {
2032         struct myri10ge_priv *mgp = netdev_priv(netdev);
2033         return mgp->msg_enable;
2034 }
2035
2036 /*
2037  * Use a low-level command to change the LED behavior. Rather than
2038  * blinking (which is the normal case), when identify is used, the
2039  * yellow LED turns solid.
2040  */
2041 static int myri10ge_led(struct myri10ge_priv *mgp, int on)
2042 {
2043         struct mcp_gen_header *hdr;
2044         struct device *dev = &mgp->pdev->dev;
2045         size_t hdr_off, pattern_off, hdr_len;
2046         u32 pattern = 0xfffffffe;
2047
2048         /* find running firmware header */
2049         hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
2050         if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
2051                 dev_err(dev, "Running firmware has bad header offset (%d)\n",
2052                         (int)hdr_off);
2053                 return -EIO;
2054         }
2055         hdr_len = swab32(readl(mgp->sram + hdr_off +
2056                                offsetof(struct mcp_gen_header, header_length)));
2057         pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
2058         if (pattern_off >= (hdr_len + hdr_off)) {
2059                 dev_info(dev, "Firmware does not support LED identification\n");
2060                 return -EINVAL;
2061         }
2062         if (!on)
2063                 pattern = swab32(readl(mgp->sram + pattern_off + 4));
2064         writel(swab32(pattern), mgp->sram + pattern_off);
2065         return 0;
2066 }
2067
2068 static int
2069 myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
2070 {
2071         struct myri10ge_priv *mgp = netdev_priv(netdev);
2072         int rc;
2073
2074         switch (state) {
2075         case ETHTOOL_ID_ACTIVE:
2076                 rc = myri10ge_led(mgp, 1);
2077                 break;
2078
2079         case ETHTOOL_ID_INACTIVE:
2080                 rc =  myri10ge_led(mgp, 0);
2081                 break;
2082
2083         default:
2084                 rc = -EINVAL;
2085         }
2086
2087         return rc;
2088 }
2089
2090 static const struct ethtool_ops myri10ge_ethtool_ops = {
2091         .get_settings = myri10ge_get_settings,
2092         .get_drvinfo = myri10ge_get_drvinfo,
2093         .get_coalesce = myri10ge_get_coalesce,
2094         .set_coalesce = myri10ge_set_coalesce,
2095         .get_pauseparam = myri10ge_get_pauseparam,
2096         .set_pauseparam = myri10ge_set_pauseparam,
2097         .get_ringparam = myri10ge_get_ringparam,
2098         .get_link = ethtool_op_get_link,
2099         .get_strings = myri10ge_get_strings,
2100         .get_sset_count = myri10ge_get_sset_count,
2101         .get_ethtool_stats = myri10ge_get_ethtool_stats,
2102         .set_msglevel = myri10ge_set_msglevel,
2103         .get_msglevel = myri10ge_get_msglevel,
2104         .set_phys_id = myri10ge_phys_id,
2105 };
2106
2107 static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
2108 {
2109         struct myri10ge_priv *mgp = ss->mgp;
2110         struct myri10ge_cmd cmd;
2111         struct net_device *dev = mgp->dev;
2112         int tx_ring_size, rx_ring_size;
2113         int tx_ring_entries, rx_ring_entries;
2114         int i, slice, status;
2115         size_t bytes;
2116
2117         /* get ring sizes */
2118         slice = ss - mgp->ss;
2119         cmd.data0 = slice;
2120         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
2121         tx_ring_size = cmd.data0;
2122         cmd.data0 = slice;
2123         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
2124         if (status != 0)
2125                 return status;
2126         rx_ring_size = cmd.data0;
2127
2128         tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
2129         rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
2130         ss->tx.mask = tx_ring_entries - 1;
2131         ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
2132
2133         status = -ENOMEM;
2134
2135         /* allocate the host shadow rings */
2136
2137         bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
2138             * sizeof(*ss->tx.req_list);
2139         ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
2140         if (ss->tx.req_bytes == NULL)
2141                 goto abort_with_nothing;
2142
2143         /* ensure req_list entries are aligned to 8 bytes */
2144         ss->tx.req_list = (struct mcp_kreq_ether_send *)
2145             ALIGN((unsigned long)ss->tx.req_bytes, 8);
2146         ss->tx.queue_active = 0;
2147
2148         bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
2149         ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
2150         if (ss->rx_small.shadow == NULL)
2151                 goto abort_with_tx_req_bytes;
2152
2153         bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
2154         ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
2155         if (ss->rx_big.shadow == NULL)
2156                 goto abort_with_rx_small_shadow;
2157
2158         /* allocate the host info rings */
2159
2160         bytes = tx_ring_entries * sizeof(*ss->tx.info);
2161         ss->tx.info = kzalloc(bytes, GFP_KERNEL);
2162         if (ss->tx.info == NULL)
2163                 goto abort_with_rx_big_shadow;
2164
2165         bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
2166         ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
2167         if (ss->rx_small.info == NULL)
2168                 goto abort_with_tx_info;
2169
2170         bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
2171         ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
2172         if (ss->rx_big.info == NULL)
2173                 goto abort_with_rx_small_info;
2174
2175         /* Fill the receive rings */
2176         ss->rx_big.cnt = 0;
2177         ss->rx_small.cnt = 0;
2178         ss->rx_big.fill_cnt = 0;
2179         ss->rx_small.fill_cnt = 0;
2180         ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2181         ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2182         ss->rx_small.watchdog_needed = 0;
2183         ss->rx_big.watchdog_needed = 0;
2184         if (mgp->small_bytes == 0) {
2185                 ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
2186         } else {
2187                 myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2188                                         mgp->small_bytes + MXGEFW_PAD, 0);
2189         }
2190
2191         if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2192                 netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
2193                            slice, ss->rx_small.fill_cnt);
2194                 goto abort_with_rx_small_ring;
2195         }
2196
2197         myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2198         if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2199                 netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
2200                            slice, ss->rx_big.fill_cnt);
2201                 goto abort_with_rx_big_ring;
2202         }
2203
2204         return 0;
2205
2206 abort_with_rx_big_ring:
2207         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2208                 int idx = i & ss->rx_big.mask;
2209                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2210                                        mgp->big_bytes);
2211                 put_page(ss->rx_big.info[idx].page);
2212         }
2213
2214 abort_with_rx_small_ring:
2215         if (mgp->small_bytes == 0)
2216                 ss->rx_small.fill_cnt = ss->rx_small.cnt;
2217         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2218                 int idx = i & ss->rx_small.mask;
2219                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2220                                        mgp->small_bytes + MXGEFW_PAD);
2221                 put_page(ss->rx_small.info[idx].page);
2222         }
2223
2224         kfree(ss->rx_big.info);
2225
2226 abort_with_rx_small_info:
2227         kfree(ss->rx_small.info);
2228
2229 abort_with_tx_info:
2230         kfree(ss->tx.info);
2231
2232 abort_with_rx_big_shadow:
2233         kfree(ss->rx_big.shadow);
2234
2235 abort_with_rx_small_shadow:
2236         kfree(ss->rx_small.shadow);
2237
2238 abort_with_tx_req_bytes:
2239         kfree(ss->tx.req_bytes);
2240         ss->tx.req_bytes = NULL;
2241         ss->tx.req_list = NULL;
2242
2243 abort_with_nothing:
2244         return status;
2245 }
2246
2247 static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2248 {
2249         struct myri10ge_priv *mgp = ss->mgp;
2250         struct sk_buff *skb;
2251         struct myri10ge_tx_buf *tx;
2252         int i, len, idx;
2253
2254         /* If not allocated, skip it */
2255         if (ss->tx.req_list == NULL)
2256                 return;
2257
2258         for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2259                 idx = i & ss->rx_big.mask;
2260                 if (i == ss->rx_big.fill_cnt - 1)
2261                         ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2262                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2263                                        mgp->big_bytes);
2264                 put_page(ss->rx_big.info[idx].page);
2265         }
2266
2267         if (mgp->small_bytes == 0)
2268                 ss->rx_small.fill_cnt = ss->rx_small.cnt;
2269         for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2270                 idx = i & ss->rx_small.mask;
2271                 if (i == ss->rx_small.fill_cnt - 1)
2272                         ss->rx_small.info[idx].page_offset =
2273                             MYRI10GE_ALLOC_SIZE;
2274                 myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2275                                        mgp->small_bytes + MXGEFW_PAD);
2276                 put_page(ss->rx_small.info[idx].page);
2277         }
2278         tx = &ss->tx;
2279         while (tx->done != tx->req) {
2280                 idx = tx->done & tx->mask;
2281                 skb = tx->info[idx].skb;
2282
2283                 /* Mark as free */
2284                 tx->info[idx].skb = NULL;
2285                 tx->done++;
2286                 len = dma_unmap_len(&tx->info[idx], len);
2287                 dma_unmap_len_set(&tx->info[idx], len, 0);
2288                 if (skb) {
2289                         ss->stats.tx_dropped++;
2290                         dev_kfree_skb_any(skb);
2291                         if (len)
2292                                 pci_unmap_single(mgp->pdev,
2293                                                  dma_unmap_addr(&tx->info[idx],
2294                                                                 bus), len,
2295                                                  PCI_DMA_TODEVICE);
2296                 } else {
2297                         if (len)
2298                                 pci_unmap_page(mgp->pdev,
2299                                                dma_unmap_addr(&tx->info[idx],
2300                                                               bus), len,
2301                                                PCI_DMA_TODEVICE);
2302                 }
2303         }
2304         kfree(ss->rx_big.info);
2305
2306         kfree(ss->rx_small.info);
2307
2308         kfree(ss->tx.info);
2309
2310         kfree(ss->rx_big.shadow);
2311
2312         kfree(ss->rx_small.shadow);
2313
2314         kfree(ss->tx.req_bytes);
2315         ss->tx.req_bytes = NULL;
2316         ss->tx.req_list = NULL;
2317 }
2318
2319 static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2320 {
2321         struct pci_dev *pdev = mgp->pdev;
2322         struct myri10ge_slice_state *ss;
2323         struct net_device *netdev = mgp->dev;
2324         int i;
2325         int status;
2326
2327         mgp->msi_enabled = 0;
2328         mgp->msix_enabled = 0;
2329         status = 0;
2330         if (myri10ge_msi) {
2331                 if (mgp->num_slices > 1) {
2332                         status = pci_enable_msix_range(pdev, mgp->msix_vectors,
2333                                         mgp->num_slices, mgp->num_slices);
2334                         if (status < 0) {
2335                                 dev_err(&pdev->dev,
2336                                         "Error %d setting up MSI-X\n", status);
2337                                 return status;
2338                         }
2339                         mgp->msix_enabled = 1;
2340                 }
2341                 if (mgp->msix_enabled == 0) {
2342                         status = pci_enable_msi(pdev);
2343                         if (status != 0) {
2344                                 dev_err(&pdev->dev,
2345                                         "Error %d setting up MSI; falling back to xPIC\n",
2346                                         status);
2347                         } else {
2348                                 mgp->msi_enabled = 1;
2349                         }
2350                 }
2351         }
2352         if (mgp->msix_enabled) {
2353                 for (i = 0; i < mgp->num_slices; i++) {
2354                         ss = &mgp->ss[i];
2355                         snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2356                                  "%s:slice-%d", netdev->name, i);
2357                         status = request_irq(mgp->msix_vectors[i].vector,
2358                                              myri10ge_intr, 0, ss->irq_desc,
2359                                              ss);
2360                         if (status != 0) {
2361                                 dev_err(&pdev->dev,
2362                                         "slice %d failed to allocate IRQ\n", i);
2363                                 i--;
2364                                 while (i >= 0) {
2365                                         free_irq(mgp->msix_vectors[i].vector,
2366                                                  &mgp->ss[i]);
2367                                         i--;
2368                                 }
2369                                 pci_disable_msix(pdev);
2370                                 return status;
2371                         }
2372                 }
2373         } else {
2374                 status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2375                                      mgp->dev->name, &mgp->ss[0]);
2376                 if (status != 0) {
2377                         dev_err(&pdev->dev, "failed to allocate IRQ\n");
2378                         if (mgp->msi_enabled)
2379                                 pci_disable_msi(pdev);
2380                 }
2381         }
2382         return status;
2383 }
2384
2385 static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2386 {
2387         struct pci_dev *pdev = mgp->pdev;
2388         int i;
2389
2390         if (mgp->msix_enabled) {
2391                 for (i = 0; i < mgp->num_slices; i++)
2392                         free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2393         } else {
2394                 free_irq(pdev->irq, &mgp->ss[0]);
2395         }
2396         if (mgp->msi_enabled)
2397                 pci_disable_msi(pdev);
2398         if (mgp->msix_enabled)
2399                 pci_disable_msix(pdev);
2400 }
2401
2402 static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2403 {
2404         struct myri10ge_cmd cmd;
2405         struct myri10ge_slice_state *ss;
2406         int status;
2407
2408         ss = &mgp->ss[slice];
2409         status = 0;
2410         if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2411                 cmd.data0 = slice;
2412                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2413                                            &cmd, 0);
2414                 ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2415                     (mgp->sram + cmd.data0);
2416         }
2417         cmd.data0 = slice;
2418         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2419                                     &cmd, 0);
2420         ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2421             (mgp->sram + cmd.data0);
2422
2423         cmd.data0 = slice;
2424         status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2425         ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2426             (mgp->sram + cmd.data0);
2427
2428         ss->tx.send_go = (__iomem __be32 *)
2429             (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2430         ss->tx.send_stop = (__iomem __be32 *)
2431             (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2432         return status;
2433
2434 }
2435
2436 static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2437 {
2438         struct myri10ge_cmd cmd;
2439         struct myri10ge_slice_state *ss;
2440         int status;
2441
2442         ss = &mgp->ss[slice];
2443         cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2444         cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2445         cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2446         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2447         if (status == -ENOSYS) {
2448                 dma_addr_t bus = ss->fw_stats_bus;
2449                 if (slice != 0)
2450                         return -EINVAL;
2451                 bus += offsetof(struct mcp_irq_data, send_done_count);
2452                 cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2453                 cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2454                 status = myri10ge_send_cmd(mgp,
2455                                            MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2456                                            &cmd, 0);
2457                 /* Firmware cannot support multicast without STATS_DMA_V2 */
2458                 mgp->fw_multicast_support = 0;
2459         } else {
2460                 mgp->fw_multicast_support = 1;
2461         }
2462         return 0;
2463 }
2464
2465 static int myri10ge_open(struct net_device *dev)
2466 {
2467         struct myri10ge_slice_state *ss;
2468         struct myri10ge_priv *mgp = netdev_priv(dev);
2469         struct myri10ge_cmd cmd;
2470         int i, status, big_pow2, slice;
2471         u8 __iomem *itable;
2472
2473         if (mgp->running != MYRI10GE_ETH_STOPPED)
2474                 return -EBUSY;
2475
2476         mgp->running = MYRI10GE_ETH_STARTING;
2477         status = myri10ge_reset(mgp);
2478         if (status != 0) {
2479                 netdev_err(dev, "failed reset\n");
2480                 goto abort_with_nothing;
2481         }
2482
2483         if (mgp->num_slices > 1) {
2484                 cmd.data0 = mgp->num_slices;
2485                 cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2486                 if (mgp->dev->real_num_tx_queues > 1)
2487                         cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2488                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2489                                            &cmd, 0);
2490                 if (status != 0) {
2491                         netdev_err(dev, "failed to set number of slices\n");
2492                         goto abort_with_nothing;
2493                 }
2494                 /* setup the indirection table */
2495                 cmd.data0 = mgp->num_slices;
2496                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2497                                            &cmd, 0);
2498
2499                 status |= myri10ge_send_cmd(mgp,
2500                                             MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2501                                             &cmd, 0);
2502                 if (status != 0) {
2503                         netdev_err(dev, "failed to setup rss tables\n");
2504                         goto abort_with_nothing;
2505                 }
2506
2507                 /* just enable an identity mapping */
2508                 itable = mgp->sram + cmd.data0;
2509                 for (i = 0; i < mgp->num_slices; i++)
2510                         __raw_writeb(i, &itable[i]);
2511
2512                 cmd.data0 = 1;
2513                 cmd.data1 = myri10ge_rss_hash;
2514                 status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2515                                            &cmd, 0);
2516                 if (status != 0) {
2517                         netdev_err(dev, "failed to enable slices\n");
2518                         goto abort_with_nothing;
2519                 }
2520         }
2521
2522         status = myri10ge_request_irq(mgp);
2523         if (status != 0)
2524                 goto abort_with_nothing;
2525
2526         /* decide what small buffer size to use.  For good TCP rx
2527          * performance, it is important to not receive 1514 byte
2528          * frames into jumbo buffers, as it confuses the socket buffer
2529          * accounting code, leading to drops and erratic performance.
2530          */
2531
2532         if (dev->mtu <= ETH_DATA_LEN)
2533                 /* enough for a TCP header */
2534                 mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2535                     ? (128 - MXGEFW_PAD)
2536                     : (SMP_CACHE_BYTES - MXGEFW_PAD);
2537         else
2538                 /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2539                 mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2540
2541         /* Override the small buffer size? */
2542         if (myri10ge_small_bytes >= 0)
2543                 mgp->small_bytes = myri10ge_small_bytes;
2544
2545         /* Firmware needs the big buff size as a power of 2.  Lie and
2546          * tell him the buffer is larger, because we only use 1
2547          * buffer/pkt, and the mtu will prevent overruns.
2548          */
2549         big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2550         if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2551                 while (!is_power_of_2(big_pow2))
2552                         big_pow2++;
2553                 mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2554         } else {
2555                 big_pow2 = MYRI10GE_ALLOC_SIZE;
2556                 mgp->big_bytes = big_pow2;
2557         }
2558
2559         /* setup the per-slice data structures */
2560         for (slice = 0; slice < mgp->num_slices; slice++) {
2561                 ss = &mgp->ss[slice];
2562
2563                 status = myri10ge_get_txrx(mgp, slice);
2564                 if (status != 0) {
2565                         netdev_err(dev, "failed to get ring sizes or locations\n");
2566                         goto abort_with_rings;
2567                 }
2568                 status = myri10ge_allocate_rings(ss);
2569                 if (status != 0)
2570                         goto abort_with_rings;
2571
2572                 /* only firmware which supports multiple TX queues
2573                  * supports setting up the tx stats on non-zero
2574                  * slices */
2575                 if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2576                         status = myri10ge_set_stats(mgp, slice);
2577                 if (status) {
2578                         netdev_err(dev, "Couldn't set stats DMA\n");
2579                         goto abort_with_rings;
2580                 }
2581
2582                 /* Initialize the slice spinlock and state used for polling */
2583                 myri10ge_ss_init_lock(ss);
2584
2585                 /* must happen prior to any irq */
2586                 napi_enable(&(ss)->napi);
2587         }
2588
2589         /* now give firmware buffers sizes, and MTU */
2590         cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2591         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2592         cmd.data0 = mgp->small_bytes;
2593         status |=
2594             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2595         cmd.data0 = big_pow2;
2596         status |=
2597             myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2598         if (status) {
2599                 netdev_err(dev, "Couldn't set buffer sizes\n");
2600                 goto abort_with_rings;
2601         }
2602
2603         /*
2604          * Set Linux style TSO mode; this is needed only on newer
2605          *  firmware versions.  Older versions default to Linux
2606          *  style TSO
2607          */
2608         cmd.data0 = 0;
2609         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2610         if (status && status != -ENOSYS) {
2611                 netdev_err(dev, "Couldn't set TSO mode\n");
2612                 goto abort_with_rings;
2613         }
2614
2615         mgp->link_state = ~0U;
2616         mgp->rdma_tags_available = 15;
2617
2618         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2619         if (status) {
2620                 netdev_err(dev, "Couldn't bring up link\n");
2621                 goto abort_with_rings;
2622         }
2623
2624         mgp->running = MYRI10GE_ETH_RUNNING;
2625         mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2626         add_timer(&mgp->watchdog_timer);
2627         netif_tx_wake_all_queues(dev);
2628
2629         return 0;
2630
2631 abort_with_rings:
2632         while (slice) {
2633                 slice--;
2634                 napi_disable(&mgp->ss[slice].napi);
2635         }
2636         for (i = 0; i < mgp->num_slices; i++)
2637                 myri10ge_free_rings(&mgp->ss[i]);
2638
2639         myri10ge_free_irq(mgp);
2640
2641 abort_with_nothing:
2642         mgp->running = MYRI10GE_ETH_STOPPED;
2643         return -ENOMEM;
2644 }
2645
2646 static int myri10ge_close(struct net_device *dev)
2647 {
2648         struct myri10ge_priv *mgp = netdev_priv(dev);
2649         struct myri10ge_cmd cmd;
2650         int status, old_down_cnt;
2651         int i;
2652
2653         if (mgp->running != MYRI10GE_ETH_RUNNING)
2654                 return 0;
2655
2656         if (mgp->ss[0].tx.req_bytes == NULL)
2657                 return 0;
2658
2659         del_timer_sync(&mgp->watchdog_timer);
2660         mgp->running = MYRI10GE_ETH_STOPPING;
2661         local_bh_disable(); /* myri10ge_ss_lock_napi needs bh disabled */
2662         for (i = 0; i < mgp->num_slices; i++) {
2663                 napi_disable(&mgp->ss[i].napi);
2664                 /* Lock the slice to prevent the busy_poll handler from
2665                  * accessing it.  Later when we bring the NIC up, myri10ge_open
2666                  * resets the slice including this lock.
2667                  */
2668                 while (!myri10ge_ss_lock_napi(&mgp->ss[i])) {
2669                         pr_info("Slice %d locked\n", i);
2670                         mdelay(1);
2671                 }
2672         }
2673         local_bh_enable();
2674         netif_carrier_off(dev);
2675
2676         netif_tx_stop_all_queues(dev);
2677         if (mgp->rebooted == 0) {
2678                 old_down_cnt = mgp->down_cnt;
2679                 mb();
2680                 status =
2681                     myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2682                 if (status)
2683                         netdev_err(dev, "Couldn't bring down link\n");
2684
2685                 wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2686                                    HZ);
2687                 if (old_down_cnt == mgp->down_cnt)
2688                         netdev_err(dev, "never got down irq\n");
2689         }
2690         netif_tx_disable(dev);
2691         myri10ge_free_irq(mgp);
2692         for (i = 0; i < mgp->num_slices; i++)
2693                 myri10ge_free_rings(&mgp->ss[i]);
2694
2695         mgp->running = MYRI10GE_ETH_STOPPED;
2696         return 0;
2697 }
2698
2699 /* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2700  * backwards one at a time and handle ring wraps */
2701
2702 static inline void
2703 myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2704                               struct mcp_kreq_ether_send *src, int cnt)
2705 {
2706         int idx, starting_slot;
2707         starting_slot = tx->req;
2708         while (cnt > 1) {
2709                 cnt--;
2710                 idx = (starting_slot + cnt) & tx->mask;
2711                 myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2712                 mb();
2713         }
2714 }
2715
2716 /*
2717  * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2718  * at most 32 bytes at a time, so as to avoid involving the software
2719  * pio handler in the nic.   We re-write the first segment's flags
2720  * to mark them valid only after writing the entire chain.
2721  */
2722
2723 static inline void
2724 myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2725                     int cnt)
2726 {
2727         int idx, i;
2728         struct mcp_kreq_ether_send __iomem *dstp, *dst;
2729         struct mcp_kreq_ether_send *srcp;
2730         u8 last_flags;
2731
2732         idx = tx->req & tx->mask;
2733
2734         last_flags = src->flags;
2735         src->flags = 0;
2736         mb();
2737         dst = dstp = &tx->lanai[idx];
2738         srcp = src;
2739
2740         if ((idx + cnt) < tx->mask) {
2741                 for (i = 0; i < (cnt - 1); i += 2) {
2742                         myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2743                         mb();   /* force write every 32 bytes */
2744                         srcp += 2;
2745                         dstp += 2;
2746                 }
2747         } else {
2748                 /* submit all but the first request, and ensure
2749                  * that it is submitted below */
2750                 myri10ge_submit_req_backwards(tx, src, cnt);
2751                 i = 0;
2752         }
2753         if (i < cnt) {
2754                 /* submit the first request */
2755                 myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2756                 mb();           /* barrier before setting valid flag */
2757         }
2758
2759         /* re-write the last 32-bits with the valid flags */
2760         src->flags = last_flags;
2761         put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2762         tx->req += cnt;
2763         mb();
2764 }
2765
2766 /*
2767  * Transmit a packet.  We need to split the packet so that a single
2768  * segment does not cross myri10ge->tx_boundary, so this makes segment
2769  * counting tricky.  So rather than try to count segments up front, we
2770  * just give up if there are too few segments to hold a reasonably
2771  * fragmented packet currently available.  If we run
2772  * out of segments while preparing a packet for DMA, we just linearize
2773  * it and try again.
2774  */
2775
2776 static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2777                                        struct net_device *dev)
2778 {
2779         struct myri10ge_priv *mgp = netdev_priv(dev);
2780         struct myri10ge_slice_state *ss;
2781         struct mcp_kreq_ether_send *req;
2782         struct myri10ge_tx_buf *tx;
2783         struct skb_frag_struct *frag;
2784         struct netdev_queue *netdev_queue;
2785         dma_addr_t bus;
2786         u32 low;
2787         __be32 high_swapped;
2788         unsigned int len;
2789         int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2790         u16 pseudo_hdr_offset, cksum_offset, queue;
2791         int cum_len, seglen, boundary, rdma_count;
2792         u8 flags, odd_flag;
2793
2794         queue = skb_get_queue_mapping(skb);
2795         ss = &mgp->ss[queue];
2796         netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2797         tx = &ss->tx;
2798
2799 again:
2800         req = tx->req_list;
2801         avail = tx->mask - 1 - (tx->req - tx->done);
2802
2803         mss = 0;
2804         max_segments = MXGEFW_MAX_SEND_DESC;
2805
2806         if (skb_is_gso(skb)) {
2807                 mss = skb_shinfo(skb)->gso_size;
2808                 max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2809         }
2810
2811         if ((unlikely(avail < max_segments))) {
2812                 /* we are out of transmit resources */
2813                 tx->stop_queue++;
2814                 netif_tx_stop_queue(netdev_queue);
2815                 return NETDEV_TX_BUSY;
2816         }
2817
2818         /* Setup checksum offloading, if needed */
2819         cksum_offset = 0;
2820         pseudo_hdr_offset = 0;
2821         odd_flag = 0;
2822         flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2823         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2824                 cksum_offset = skb_checksum_start_offset(skb);
2825                 pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2826                 /* If the headers are excessively large, then we must
2827                  * fall back to a software checksum */
2828                 if (unlikely(!mss && (cksum_offset > 255 ||
2829                                       pseudo_hdr_offset > 127))) {
2830                         if (skb_checksum_help(skb))
2831                                 goto drop;
2832                         cksum_offset = 0;
2833                         pseudo_hdr_offset = 0;
2834                 } else {
2835                         odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2836                         flags |= MXGEFW_FLAGS_CKSUM;
2837                 }
2838         }
2839
2840         cum_len = 0;
2841
2842         if (mss) {              /* TSO */
2843                 /* this removes any CKSUM flag from before */
2844                 flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2845
2846                 /* negative cum_len signifies to the
2847                  * send loop that we are still in the
2848                  * header portion of the TSO packet.
2849                  * TSO header can be at most 1KB long */
2850                 cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2851
2852                 /* for IPv6 TSO, the checksum offset stores the
2853                  * TCP header length, to save the firmware from
2854                  * the need to parse the headers */
2855                 if (skb_is_gso_v6(skb)) {
2856                         cksum_offset = tcp_hdrlen(skb);
2857                         /* Can only handle headers <= max_tso6 long */
2858                         if (unlikely(-cum_len > mgp->max_tso6))
2859                                 return myri10ge_sw_tso(skb, dev);
2860                 }
2861                 /* for TSO, pseudo_hdr_offset holds mss.
2862                  * The firmware figures out where to put
2863                  * the checksum by parsing the header. */
2864                 pseudo_hdr_offset = mss;
2865         } else
2866                 /* Mark small packets, and pad out tiny packets */
2867         if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2868                 flags |= MXGEFW_FLAGS_SMALL;
2869
2870                 /* pad frames to at least ETH_ZLEN bytes */
2871                 if (unlikely(skb->len < ETH_ZLEN)) {
2872                         if (skb_padto(skb, ETH_ZLEN)) {
2873                                 /* The packet is gone, so we must
2874                                  * return 0 */
2875                                 ss->stats.tx_dropped += 1;
2876                                 return NETDEV_TX_OK;
2877                         }
2878                         /* adjust the len to account for the zero pad
2879                          * so that the nic can know how long it is */
2880                         skb->len = ETH_ZLEN;
2881                 }
2882         }
2883
2884         /* map the skb for DMA */
2885         len = skb_headlen(skb);
2886         idx = tx->req & tx->mask;
2887         tx->info[idx].skb = skb;
2888         bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2889         dma_unmap_addr_set(&tx->info[idx], bus, bus);
2890         dma_unmap_len_set(&tx->info[idx], len, len);
2891
2892         frag_cnt = skb_shinfo(skb)->nr_frags;
2893         frag_idx = 0;
2894         count = 0;
2895         rdma_count = 0;
2896
2897         /* "rdma_count" is the number of RDMAs belonging to the
2898          * current packet BEFORE the current send request. For
2899          * non-TSO packets, this is equal to "count".
2900          * For TSO packets, rdma_count needs to be reset
2901          * to 0 after a segment cut.
2902          *
2903          * The rdma_count field of the send request is
2904          * the number of RDMAs of the packet starting at
2905          * that request. For TSO send requests with one ore more cuts
2906          * in the middle, this is the number of RDMAs starting
2907          * after the last cut in the request. All previous
2908          * segments before the last cut implicitly have 1 RDMA.
2909          *
2910          * Since the number of RDMAs is not known beforehand,
2911          * it must be filled-in retroactively - after each
2912          * segmentation cut or at the end of the entire packet.
2913          */
2914
2915         while (1) {
2916                 /* Break the SKB or Fragment up into pieces which
2917                  * do not cross mgp->tx_boundary */
2918                 low = MYRI10GE_LOWPART_TO_U32(bus);
2919                 high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2920                 while (len) {
2921                         u8 flags_next;
2922                         int cum_len_next;
2923
2924                         if (unlikely(count == max_segments))
2925                                 goto abort_linearize;
2926
2927                         boundary =
2928                             (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2929                         seglen = boundary - low;
2930                         if (seglen > len)
2931                                 seglen = len;
2932                         flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2933                         cum_len_next = cum_len + seglen;
2934                         if (mss) {      /* TSO */
2935                                 (req - rdma_count)->rdma_count = rdma_count + 1;
2936
2937                                 if (likely(cum_len >= 0)) {     /* payload */
2938                                         int next_is_first, chop;
2939
2940                                         chop = (cum_len_next > mss);
2941                                         cum_len_next = cum_len_next % mss;
2942                                         next_is_first = (cum_len_next == 0);
2943                                         flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2944                                         flags_next |= next_is_first *
2945                                             MXGEFW_FLAGS_FIRST;
2946                                         rdma_count |= -(chop | next_is_first);
2947                                         rdma_count += chop & ~next_is_first;
2948                                 } else if (likely(cum_len_next >= 0)) { /* header ends */
2949                                         int small;
2950
2951                                         rdma_count = -1;
2952                                         cum_len_next = 0;
2953                                         seglen = -cum_len;
2954                                         small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2955                                         flags_next = MXGEFW_FLAGS_TSO_PLD |
2956                                             MXGEFW_FLAGS_FIRST |
2957                                             (small * MXGEFW_FLAGS_SMALL);
2958                                 }
2959                         }
2960                         req->addr_high = high_swapped;
2961                         req->addr_low = htonl(low);
2962                         req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2963                         req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2964                         req->rdma_count = 1;
2965                         req->length = htons(seglen);
2966                         req->cksum_offset = cksum_offset;
2967                         req->flags = flags | ((cum_len & 1) * odd_flag);
2968
2969                         low += seglen;
2970                         len -= seglen;
2971                         cum_len = cum_len_next;
2972                         flags = flags_next;
2973                         req++;
2974                         count++;
2975                         rdma_count++;
2976                         if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2977                                 if (unlikely(cksum_offset > seglen))
2978                                         cksum_offset -= seglen;
2979                                 else
2980                                         cksum_offset = 0;
2981                         }
2982                 }
2983                 if (frag_idx == frag_cnt)
2984                         break;
2985
2986                 /* map next fragment for DMA */
2987                 idx = (count + tx->req) & tx->mask;
2988                 frag = &skb_shinfo(skb)->frags[frag_idx];
2989                 frag_idx++;
2990                 len = skb_frag_size(frag);
2991                 bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
2992                                        DMA_TO_DEVICE);
2993                 dma_unmap_addr_set(&tx->info[idx], bus, bus);
2994                 dma_unmap_len_set(&tx->info[idx], len, len);
2995         }
2996
2997         (req - rdma_count)->rdma_count = rdma_count;
2998         if (mss)
2999                 do {
3000                         req--;
3001                         req->flags |= MXGEFW_FLAGS_TSO_LAST;
3002                 } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
3003                                          MXGEFW_FLAGS_FIRST)));
3004         idx = ((count - 1) + tx->req) & tx->mask;
3005         tx->info[idx].last = 1;
3006         myri10ge_submit_req(tx, tx->req_list, count);
3007         /* if using multiple tx queues, make sure NIC polls the
3008          * current slice */
3009         if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
3010                 tx->queue_active = 1;
3011                 put_be32(htonl(1), tx->send_go);
3012                 mb();
3013                 mmiowb();
3014         }
3015         tx->pkt_start++;
3016         if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
3017                 tx->stop_queue++;
3018                 netif_tx_stop_queue(netdev_queue);
3019         }
3020         return NETDEV_TX_OK;
3021
3022 abort_linearize:
3023         /* Free any DMA resources we've alloced and clear out the skb
3024          * slot so as to not trip up assertions, and to avoid a
3025          * double-free if linearizing fails */
3026
3027         last_idx = (idx + 1) & tx->mask;
3028         idx = tx->req & tx->mask;
3029         tx->info[idx].skb = NULL;
3030         do {
3031                 len = dma_unmap_len(&tx->info[idx], len);
3032                 if (len) {
3033                         if (tx->info[idx].skb != NULL)
3034                                 pci_unmap_single(mgp->pdev,
3035                                                  dma_unmap_addr(&tx->info[idx],
3036                                                                 bus), len,
3037                                                  PCI_DMA_TODEVICE);
3038                         else
3039                                 pci_unmap_page(mgp->pdev,
3040                                                dma_unmap_addr(&tx->info[idx],
3041                                                               bus), len,
3042                                                PCI_DMA_TODEVICE);
3043                         dma_unmap_len_set(&tx->info[idx], len, 0);
3044                         tx->info[idx].skb = NULL;
3045                 }
3046                 idx = (idx + 1) & tx->mask;
3047         } while (idx != last_idx);
3048         if (skb_is_gso(skb)) {
3049                 netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
3050                 goto drop;
3051         }
3052
3053         if (skb_linearize(skb))
3054                 goto drop;
3055
3056         tx->linearized++;
3057         goto again;
3058
3059 drop:
3060         dev_kfree_skb_any(skb);
3061         ss->stats.tx_dropped += 1;
3062         return NETDEV_TX_OK;
3063
3064 }
3065
3066 static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
3067                                          struct net_device *dev)
3068 {
3069         struct sk_buff *segs, *curr;
3070         struct myri10ge_priv *mgp = netdev_priv(dev);
3071         struct myri10ge_slice_state *ss;
3072         netdev_tx_t status;
3073
3074         segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
3075         if (IS_ERR(segs))
3076                 goto drop;
3077
3078         while (segs) {
3079                 curr = segs;
3080                 segs = segs->next;
3081                 curr->next = NULL;
3082                 status = myri10ge_xmit(curr, dev);
3083                 if (status != 0) {
3084                         dev_kfree_skb_any(curr);
3085                         if (segs != NULL) {
3086                                 curr = segs;
3087                                 segs = segs->next;
3088                                 curr->next = NULL;
3089                                 dev_kfree_skb_any(segs);
3090                         }
3091                         goto drop;
3092                 }
3093         }
3094         dev_kfree_skb_any(skb);
3095         return NETDEV_TX_OK;
3096
3097 drop:
3098         ss = &mgp->ss[skb_get_queue_mapping(skb)];
3099         dev_kfree_skb_any(skb);
3100         ss->stats.tx_dropped += 1;
3101         return NETDEV_TX_OK;
3102 }
3103
3104 static struct rtnl_link_stats64 *myri10ge_get_stats(struct net_device *dev,
3105                                                     struct rtnl_link_stats64 *stats)
3106 {
3107         const struct myri10ge_priv *mgp = netdev_priv(dev);
3108         const struct myri10ge_slice_netstats *slice_stats;
3109         int i;
3110
3111         for (i = 0; i < mgp->num_slices; i++) {
3112                 slice_stats = &mgp->ss[i].stats;
3113                 stats->rx_packets += slice_stats->rx_packets;
3114                 stats->tx_packets += slice_stats->tx_packets;
3115                 stats->rx_bytes += slice_stats->rx_bytes;
3116                 stats->tx_bytes += slice_stats->tx_bytes;
3117                 stats->rx_dropped += slice_stats->rx_dropped;
3118                 stats->tx_dropped += slice_stats->tx_dropped;
3119         }
3120         return stats;
3121 }
3122
3123 static void myri10ge_set_multicast_list(struct net_device *dev)
3124 {
3125         struct myri10ge_priv *mgp = netdev_priv(dev);
3126         struct myri10ge_cmd cmd;
3127         struct netdev_hw_addr *ha;
3128         __be32 data[2] = { 0, 0 };
3129         int err;
3130
3131         /* can be called from atomic contexts,
3132          * pass 1 to force atomicity in myri10ge_send_cmd() */
3133         myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
3134
3135         /* This firmware is known to not support multicast */
3136         if (!mgp->fw_multicast_support)
3137                 return;
3138
3139         /* Disable multicast filtering */
3140
3141         err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
3142         if (err != 0) {
3143                 netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
3144                            err);
3145                 goto abort;
3146         }
3147
3148         if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
3149                 /* request to disable multicast filtering, so quit here */
3150                 return;
3151         }
3152
3153         /* Flush the filters */
3154
3155         err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
3156                                 &cmd, 1);
3157         if (err != 0) {
3158                 netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
3159                            err);
3160                 goto abort;
3161         }
3162
3163         /* Walk the multicast list, and add each address */
3164         netdev_for_each_mc_addr(ha, dev) {
3165                 memcpy(data, &ha->addr, ETH_ALEN);
3166                 cmd.data0 = ntohl(data[0]);
3167                 cmd.data1 = ntohl(data[1]);
3168                 err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
3169                                         &cmd, 1);
3170
3171                 if (err != 0) {
3172                         netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
3173                                    err, ha->addr);
3174                         goto abort;
3175                 }
3176         }
3177         /* Enable multicast filtering */
3178         err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3179         if (err != 0) {
3180                 netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3181                            err);
3182                 goto abort;
3183         }
3184
3185         return;
3186
3187 abort:
3188         return;
3189 }
3190
3191 static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3192 {
3193         struct sockaddr *sa = addr;
3194         struct myri10ge_priv *mgp = netdev_priv(dev);
3195         int status;
3196
3197         if (!is_valid_ether_addr(sa->sa_data))
3198                 return -EADDRNOTAVAIL;
3199
3200         status = myri10ge_update_mac_address(mgp, sa->sa_data);
3201         if (status != 0) {
3202                 netdev_err(dev, "changing mac address failed with %d\n",
3203                            status);
3204                 return status;
3205         }
3206
3207         /* change the dev structure */
3208         memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
3209         return 0;
3210 }
3211
3212 static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3213 {
3214         struct myri10ge_priv *mgp = netdev_priv(dev);
3215         int error = 0;
3216
3217         if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3218                 netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
3219                 return -EINVAL;
3220         }
3221         netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
3222         if (mgp->running) {
3223                 /* if we change the mtu on an active device, we must
3224                  * reset the device so the firmware sees the change */
3225                 myri10ge_close(dev);
3226                 dev->mtu = new_mtu;
3227                 myri10ge_open(dev);
3228         } else
3229                 dev->mtu = new_mtu;
3230
3231         return error;
3232 }
3233
3234 /*
3235  * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3236  * Only do it if the bridge is a root port since we don't want to disturb
3237  * any other device, except if forced with myri10ge_ecrc_enable > 1.
3238  */
3239
3240 static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3241 {
3242         struct pci_dev *bridge = mgp->pdev->bus->self;
3243         struct device *dev = &mgp->pdev->dev;
3244         int cap;
3245         unsigned err_cap;
3246         int ret;
3247
3248         if (!myri10ge_ecrc_enable || !bridge)
3249                 return;
3250
3251         /* check that the bridge is a root port */
3252         if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
3253                 if (myri10ge_ecrc_enable > 1) {
3254                         struct pci_dev *prev_bridge, *old_bridge = bridge;
3255
3256                         /* Walk the hierarchy up to the root port
3257                          * where ECRC has to be enabled */
3258                         do {
3259                                 prev_bridge = bridge;
3260                                 bridge = bridge->bus->self;
3261                                 if (!bridge || prev_bridge == bridge) {
3262                                         dev_err(dev,
3263                                                 "Failed to find root port"
3264                                                 " to force ECRC\n");
3265                                         return;
3266                                 }
3267                         } while (pci_pcie_type(bridge) !=
3268                                  PCI_EXP_TYPE_ROOT_PORT);
3269
3270                         dev_info(dev,
3271                                  "Forcing ECRC on non-root port %s"
3272                                  " (enabling on root port %s)\n",
3273                                  pci_name(old_bridge), pci_name(bridge));
3274                 } else {
3275                         dev_err(dev,
3276                                 "Not enabling ECRC on non-root port %s\n",
3277                                 pci_name(bridge));
3278                         return;
3279                 }
3280         }
3281
3282         cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3283         if (!cap)
3284                 return;
3285
3286         ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3287         if (ret) {
3288                 dev_err(dev, "failed reading ext-conf-space of %s\n",
3289                         pci_name(bridge));
3290                 dev_err(dev, "\t pci=nommconf in use? "
3291                         "or buggy/incomplete/absent ACPI MCFG attr?\n");
3292                 return;
3293         }
3294         if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3295                 return;
3296
3297         err_cap |= PCI_ERR_CAP_ECRC_GENE;
3298         pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3299         dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3300 }
3301
3302 /*
3303  * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3304  * when the PCI-E Completion packets are aligned on an 8-byte
3305  * boundary.  Some PCI-E chip sets always align Completion packets; on
3306  * the ones that do not, the alignment can be enforced by enabling
3307  * ECRC generation (if supported).
3308  *
3309  * When PCI-E Completion packets are not aligned, it is actually more
3310  * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3311  *
3312  * If the driver can neither enable ECRC nor verify that it has
3313  * already been enabled, then it must use a firmware image which works
3314  * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3315  * should also ensure that it never gives the device a Read-DMA which is
3316  * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3317  * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3318  * firmware image, and set tx_boundary to 4KB.
3319  */
3320
3321 static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3322 {
3323         struct pci_dev *pdev = mgp->pdev;
3324         struct device *dev = &pdev->dev;
3325         int status;
3326
3327         mgp->tx_boundary = 4096;
3328         /*
3329          * Verify the max read request size was set to 4KB
3330          * before trying the test with 4KB.
3331          */
3332         status = pcie_get_readrq(pdev);
3333         if (status < 0) {
3334                 dev_err(dev, "Couldn't read max read req size: %d\n", status);
3335                 goto abort;
3336         }
3337         if (status != 4096) {
3338                 dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3339                 mgp->tx_boundary = 2048;
3340         }
3341         /*
3342          * load the optimized firmware (which assumes aligned PCIe
3343          * completions) in order to see if it works on this host.
3344          */
3345         set_fw_name(mgp, myri10ge_fw_aligned, false);
3346         status = myri10ge_load_firmware(mgp, 1);
3347         if (status != 0) {
3348                 goto abort;
3349         }
3350
3351         /*
3352          * Enable ECRC if possible
3353          */
3354         myri10ge_enable_ecrc(mgp);
3355
3356         /*
3357          * Run a DMA test which watches for unaligned completions and
3358          * aborts on the first one seen.
3359          */
3360
3361         status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3362         if (status == 0)
3363                 return;         /* keep the aligned firmware */
3364
3365         if (status != -E2BIG)
3366                 dev_warn(dev, "DMA test failed: %d\n", status);
3367         if (status == -ENOSYS)
3368                 dev_warn(dev, "Falling back to ethp! "
3369                          "Please install up to date fw\n");
3370 abort:
3371         /* fall back to using the unaligned firmware */
3372         mgp->tx_boundary = 2048;
3373         set_fw_name(mgp, myri10ge_fw_unaligned, false);
3374 }
3375
3376 static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3377 {
3378         int overridden = 0;
3379
3380         if (myri10ge_force_firmware == 0) {
3381                 int link_width;
3382                 u16 lnk;
3383
3384                 pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
3385                 link_width = (lnk >> 4) & 0x3f;
3386
3387                 /* Check to see if Link is less than 8 or if the
3388                  * upstream bridge is known to provide aligned
3389                  * completions */
3390                 if (link_width < 8) {
3391                         dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3392                                  link_width);
3393                         mgp->tx_boundary = 4096;
3394                         set_fw_name(mgp, myri10ge_fw_aligned, false);
3395                 } else {
3396                         myri10ge_firmware_probe(mgp);
3397                 }
3398         } else {
3399                 if (myri10ge_force_firmware == 1) {
3400                         dev_info(&mgp->pdev->dev,
3401                                  "Assuming aligned completions (forced)\n");
3402                         mgp->tx_boundary = 4096;
3403                         set_fw_name(mgp, myri10ge_fw_aligned, false);
3404                 } else {
3405                         dev_info(&mgp->pdev->dev,
3406                                  "Assuming unaligned completions (forced)\n");
3407                         mgp->tx_boundary = 2048;
3408                         set_fw_name(mgp, myri10ge_fw_unaligned, false);
3409                 }
3410         }
3411
3412         kparam_block_sysfs_write(myri10ge_fw_name);
3413         if (myri10ge_fw_name != NULL) {
3414                 char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
3415                 if (fw_name) {
3416                         overridden = 1;
3417                         set_fw_name(mgp, fw_name, true);
3418                 }
3419         }
3420         kparam_unblock_sysfs_write(myri10ge_fw_name);
3421
3422         if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3423             myri10ge_fw_names[mgp->board_number] != NULL &&
3424             strlen(myri10ge_fw_names[mgp->board_number])) {
3425                 set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
3426                 overridden = 1;
3427         }
3428         if (overridden)
3429                 dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3430                          mgp->fw_name);
3431 }
3432
3433 static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
3434 {
3435         struct pci_dev *bridge = pdev->bus->self;
3436         int cap;
3437         u32 mask;
3438
3439         if (bridge == NULL)
3440                 return;
3441
3442         cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3443         if (cap) {
3444                 /* a sram parity error can cause a surprise link
3445                  * down; since we expect and can recover from sram
3446                  * parity errors, mask surprise link down events */
3447                 pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
3448                 mask |= 0x20;
3449                 pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
3450         }
3451 }
3452
3453 #ifdef CONFIG_PM
3454 static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3455 {
3456         struct myri10ge_priv *mgp;
3457         struct net_device *netdev;
3458
3459         mgp = pci_get_drvdata(pdev);
3460         if (mgp == NULL)
3461                 return -EINVAL;
3462         netdev = mgp->dev;
3463
3464         netif_device_detach(netdev);
3465         if (netif_running(netdev)) {
3466                 netdev_info(netdev, "closing\n");
3467                 rtnl_lock();
3468                 myri10ge_close(netdev);
3469                 rtnl_unlock();
3470         }
3471         myri10ge_dummy_rdma(mgp, 0);
3472         pci_save_state(pdev);
3473         pci_disable_device(pdev);
3474
3475         return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3476 }
3477
3478 static int myri10ge_resume(struct pci_dev *pdev)
3479 {
3480         struct myri10ge_priv *mgp;
3481         struct net_device *netdev;
3482         int status;
3483         u16 vendor;
3484
3485         mgp = pci_get_drvdata(pdev);
3486         if (mgp == NULL)
3487                 return -EINVAL;
3488         netdev = mgp->dev;
3489         pci_set_power_state(pdev, PCI_D0);      /* zeros conf space as a side effect */
3490         msleep(5);              /* give card time to respond */
3491         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3492         if (vendor == 0xffff) {
3493                 netdev_err(mgp->dev, "device disappeared!\n");
3494                 return -EIO;
3495         }
3496
3497         pci_restore_state(pdev);
3498
3499         status = pci_enable_device(pdev);
3500         if (status) {
3501                 dev_err(&pdev->dev, "failed to enable device\n");
3502                 return status;
3503         }
3504
3505         pci_set_master(pdev);
3506
3507         myri10ge_reset(mgp);
3508         myri10ge_dummy_rdma(mgp, 1);
3509
3510         /* Save configuration space to be restored if the
3511          * nic resets due to a parity error */
3512         pci_save_state(pdev);
3513
3514         if (netif_running(netdev)) {
3515                 rtnl_lock();
3516                 status = myri10ge_open(netdev);
3517                 rtnl_unlock();
3518                 if (status != 0)
3519                         goto abort_with_enabled;
3520
3521         }
3522         netif_device_attach(netdev);
3523
3524         return 0;
3525
3526 abort_with_enabled:
3527         pci_disable_device(pdev);
3528         return -EIO;
3529
3530 }
3531 #endif                          /* CONFIG_PM */
3532
3533 static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3534 {
3535         struct pci_dev *pdev = mgp->pdev;
3536         int vs = mgp->vendor_specific_offset;
3537         u32 reboot;
3538
3539         /*enter read32 mode */
3540         pci_write_config_byte(pdev, vs + 0x10, 0x3);
3541
3542         /*read REBOOT_STATUS (0xfffffff0) */
3543         pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3544         pci_read_config_dword(pdev, vs + 0x14, &reboot);
3545         return reboot;
3546 }
3547
3548 static void
3549 myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
3550                      int *busy_slice_cnt, u32 rx_pause_cnt)
3551 {
3552         struct myri10ge_priv *mgp = ss->mgp;
3553         int slice = ss - mgp->ss;
3554
3555         if (ss->tx.req != ss->tx.done &&
3556             ss->tx.done == ss->watchdog_tx_done &&
3557             ss->watchdog_tx_req != ss->watchdog_tx_done) {
3558                 /* nic seems like it might be stuck.. */
3559                 if (rx_pause_cnt != mgp->watchdog_pause) {
3560                         if (net_ratelimit())
3561                                 netdev_warn(mgp->dev, "slice %d: TX paused, "
3562                                             "check link partner\n", slice);
3563                 } else {
3564                         netdev_warn(mgp->dev,
3565                                     "slice %d: TX stuck %d %d %d %d %d %d\n",
3566                                     slice, ss->tx.queue_active, ss->tx.req,
3567                                     ss->tx.done, ss->tx.pkt_start,
3568                                     ss->tx.pkt_done,
3569                                     (int)ntohl(mgp->ss[slice].fw_stats->
3570                                                send_done_count));
3571                         *reset_needed = 1;
3572                         ss->stuck = 1;
3573                 }
3574         }
3575         if (ss->watchdog_tx_done != ss->tx.done ||
3576             ss->watchdog_rx_done != ss->rx_done.cnt) {
3577                 *busy_slice_cnt += 1;
3578         }
3579         ss->watchdog_tx_done = ss->tx.done;
3580         ss->watchdog_tx_req = ss->tx.req;
3581         ss->watchdog_rx_done = ss->rx_done.cnt;
3582 }
3583
3584 /*
3585  * This watchdog is used to check whether the board has suffered
3586  * from a parity error and needs to be recovered.
3587  */
3588 static void myri10ge_watchdog(struct work_struct *work)
3589 {
3590         struct myri10ge_priv *mgp =
3591             container_of(work, struct myri10ge_priv, watchdog_work);
3592         struct myri10ge_slice_state *ss;
3593         u32 reboot, rx_pause_cnt;
3594         int status, rebooted;
3595         int i;
3596         int reset_needed = 0;
3597         int busy_slice_cnt = 0;
3598         u16 cmd, vendor;
3599
3600         mgp->watchdog_resets++;
3601         pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3602         rebooted = 0;
3603         if ((cmd & PCI_COMMAND_MASTER) == 0) {
3604                 /* Bus master DMA disabled?  Check to see
3605                  * if the card rebooted due to a parity error
3606                  * For now, just report it */
3607                 reboot = myri10ge_read_reboot(mgp);
3608                 netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
3609                            reboot, myri10ge_reset_recover ? "" : " not");
3610                 if (myri10ge_reset_recover == 0)
3611                         return;
3612                 rtnl_lock();
3613                 mgp->rebooted = 1;
3614                 rebooted = 1;
3615                 myri10ge_close(mgp->dev);
3616                 myri10ge_reset_recover--;
3617                 mgp->rebooted = 0;
3618                 /*
3619                  * A rebooted nic will come back with config space as
3620                  * it was after power was applied to PCIe bus.
3621                  * Attempt to restore config space which was saved
3622                  * when the driver was loaded, or the last time the
3623                  * nic was resumed from power saving mode.
3624                  */
3625                 pci_restore_state(mgp->pdev);
3626
3627                 /* save state again for accounting reasons */
3628                 pci_save_state(mgp->pdev);
3629
3630         } else {
3631                 /* if we get back -1's from our slot, perhaps somebody
3632                  * powered off our card.  Don't try to reset it in
3633                  * this case */
3634                 if (cmd == 0xffff) {
3635                         pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3636                         if (vendor == 0xffff) {
3637                                 netdev_err(mgp->dev, "device disappeared!\n");
3638                                 return;
3639                         }
3640                 }
3641                 /* Perhaps it is a software error. See if stuck slice
3642                  * has recovered, reset if not */
3643                 rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3644                 for (i = 0; i < mgp->num_slices; i++) {
3645                         ss = mgp->ss;
3646                         if (ss->stuck) {
3647                                 myri10ge_check_slice(ss, &reset_needed,
3648                                                      &busy_slice_cnt,
3649                                                      rx_pause_cnt);
3650                                 ss->stuck = 0;
3651                         }
3652                 }
3653                 if (!reset_needed) {
3654                         netdev_dbg(mgp->dev, "not resetting\n");
3655                         return;
3656                 }
3657
3658                 netdev_err(mgp->dev, "device timeout, resetting\n");
3659         }
3660
3661         if (!rebooted) {
3662                 rtnl_lock();
3663                 myri10ge_close(mgp->dev);
3664         }
3665         status = myri10ge_load_firmware(mgp, 1);
3666         if (status != 0)
3667                 netdev_err(mgp->dev, "failed to load firmware\n");
3668         else
3669                 myri10ge_open(mgp->dev);
3670         rtnl_unlock();
3671 }
3672
3673 /*
3674  * We use our own timer routine rather than relying upon
3675  * netdev->tx_timeout because we have a very large hardware transmit
3676  * queue.  Due to the large queue, the netdev->tx_timeout function
3677  * cannot detect a NIC with a parity error in a timely fashion if the
3678  * NIC is lightly loaded.
3679  */
3680 static void myri10ge_watchdog_timer(unsigned long arg)
3681 {
3682         struct myri10ge_priv *mgp;
3683         struct myri10ge_slice_state *ss;
3684         int i, reset_needed, busy_slice_cnt;
3685         u32 rx_pause_cnt;
3686         u16 cmd;
3687
3688         mgp = (struct myri10ge_priv *)arg;
3689
3690         rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3691         busy_slice_cnt = 0;
3692         for (i = 0, reset_needed = 0;
3693              i < mgp->num_slices && reset_needed == 0; ++i) {
3694
3695                 ss = &mgp->ss[i];
3696                 if (ss->rx_small.watchdog_needed) {
3697                         myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3698                                                 mgp->small_bytes + MXGEFW_PAD,
3699                                                 1);
3700                         if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3701                             myri10ge_fill_thresh)
3702                                 ss->rx_small.watchdog_needed = 0;
3703                 }
3704                 if (ss->rx_big.watchdog_needed) {
3705                         myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3706                                                 mgp->big_bytes, 1);
3707                         if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3708                             myri10ge_fill_thresh)
3709                                 ss->rx_big.watchdog_needed = 0;
3710                 }
3711                 myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
3712                                      rx_pause_cnt);
3713         }
3714         /* if we've sent or received no traffic, poll the NIC to
3715          * ensure it is still there.  Otherwise, we risk not noticing
3716          * an error in a timely fashion */
3717         if (busy_slice_cnt == 0) {
3718                 pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3719                 if ((cmd & PCI_COMMAND_MASTER) == 0) {
3720                         reset_needed = 1;
3721                 }
3722         }
3723         mgp->watchdog_pause = rx_pause_cnt;
3724
3725         if (reset_needed) {
3726                 schedule_work(&mgp->watchdog_work);
3727         } else {
3728                 /* rearm timer */
3729                 mod_timer(&mgp->watchdog_timer,
3730                           jiffies + myri10ge_watchdog_timeout * HZ);
3731         }
3732 }
3733
3734 static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3735 {
3736         struct myri10ge_slice_state *ss;
3737         struct pci_dev *pdev = mgp->pdev;
3738         size_t bytes;
3739         int i;
3740
3741         if (mgp->ss == NULL)
3742                 return;
3743
3744         for (i = 0; i < mgp->num_slices; i++) {
3745                 ss = &mgp->ss[i];
3746                 if (ss->rx_done.entry != NULL) {
3747                         bytes = mgp->max_intr_slots *
3748                             sizeof(*ss->rx_done.entry);
3749                         dma_free_coherent(&pdev->dev, bytes,
3750                                           ss->rx_done.entry, ss->rx_done.bus);
3751                         ss->rx_done.entry = NULL;
3752                 }
3753                 if (ss->fw_stats != NULL) {
3754                         bytes = sizeof(*ss->fw_stats);
3755                         dma_free_coherent(&pdev->dev, bytes,
3756                                           ss->fw_stats, ss->fw_stats_bus);
3757                         ss->fw_stats = NULL;
3758                 }
3759                 napi_hash_del(&ss->napi);
3760                 netif_napi_del(&ss->napi);
3761         }
3762         /* Wait till napi structs are no longer used, and then free ss. */
3763         synchronize_rcu();
3764         kfree(mgp->ss);
3765         mgp->ss = NULL;
3766 }
3767
3768 static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3769 {
3770         struct myri10ge_slice_state *ss;
3771         struct pci_dev *pdev = mgp->pdev;
3772         size_t bytes;
3773         int i;
3774
3775         bytes = sizeof(*mgp->ss) * mgp->num_slices;
3776         mgp->ss = kzalloc(bytes, GFP_KERNEL);
3777         if (mgp->ss == NULL) {
3778                 return -ENOMEM;
3779         }
3780
3781         for (i = 0; i < mgp->num_slices; i++) {
3782                 ss = &mgp->ss[i];
3783                 bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3784                 ss->rx_done.entry = dma_zalloc_coherent(&pdev->dev, bytes,
3785                                                         &ss->rx_done.bus,
3786                                                         GFP_KERNEL);
3787                 if (ss->rx_done.entry == NULL)
3788                         goto abort;
3789                 bytes = sizeof(*ss->fw_stats);
3790                 ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3791                                                   &ss->fw_stats_bus,
3792                                                   GFP_KERNEL);
3793                 if (ss->fw_stats == NULL)
3794                         goto abort;
3795                 ss->mgp = mgp;
3796                 ss->dev = mgp->dev;
3797                 netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3798                                myri10ge_napi_weight);
3799                 napi_hash_add(&ss->napi);
3800         }
3801         return 0;
3802 abort:
3803         myri10ge_free_slices(mgp);
3804         return -ENOMEM;
3805 }
3806
3807 /*
3808  * This function determines the number of slices supported.
3809  * The number slices is the minimum of the number of CPUS,
3810  * the number of MSI-X irqs supported, the number of slices
3811  * supported by the firmware
3812  */
3813 static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3814 {
3815         struct myri10ge_cmd cmd;
3816         struct pci_dev *pdev = mgp->pdev;
3817         char *old_fw;
3818         bool old_allocated;
3819         int i, status, ncpus;
3820
3821         mgp->num_slices = 1;
3822         ncpus = netif_get_num_default_rss_queues();
3823
3824         if (myri10ge_max_slices == 1 || !pdev->msix_cap ||
3825             (myri10ge_max_slices == -1 && ncpus < 2))
3826                 return;
3827
3828         /* try to load the slice aware rss firmware */
3829         old_fw = mgp->fw_name;
3830         old_allocated = mgp->fw_name_allocated;
3831         /* don't free old_fw if we override it. */
3832         mgp->fw_name_allocated = false;
3833
3834         if (myri10ge_fw_name != NULL) {
3835                 dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3836                          myri10ge_fw_name);
3837                 set_fw_name(mgp, myri10ge_fw_name, false);
3838         } else if (old_fw == myri10ge_fw_aligned)
3839                 set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
3840         else
3841                 set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
3842         status = myri10ge_load_firmware(mgp, 0);
3843         if (status != 0) {
3844                 dev_info(&pdev->dev, "Rss firmware not found\n");
3845                 if (old_allocated)
3846                         kfree(old_fw);
3847                 return;
3848         }
3849
3850         /* hit the board with a reset to ensure it is alive */
3851         memset(&cmd, 0, sizeof(cmd));
3852         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3853         if (status != 0) {
3854                 dev_err(&mgp->pdev->dev, "failed reset\n");
3855                 goto abort_with_fw;
3856         }
3857
3858         mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3859
3860         /* tell it the size of the interrupt queues */
3861         cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3862         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3863         if (status != 0) {
3864                 dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3865                 goto abort_with_fw;
3866         }
3867
3868         /* ask the maximum number of slices it supports */
3869         status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3870         if (status != 0)
3871                 goto abort_with_fw;
3872         else
3873                 mgp->num_slices = cmd.data0;
3874
3875         /* Only allow multiple slices if MSI-X is usable */
3876         if (!myri10ge_msi) {
3877                 goto abort_with_fw;
3878         }
3879
3880         /* if the admin did not specify a limit to how many
3881          * slices we should use, cap it automatically to the
3882          * number of CPUs currently online */
3883         if (myri10ge_max_slices == -1)
3884                 myri10ge_max_slices = ncpus;
3885
3886         if (mgp->num_slices > myri10ge_max_slices)
3887                 mgp->num_slices = myri10ge_max_slices;
3888
3889         /* Now try to allocate as many MSI-X vectors as we have
3890          * slices. We give up on MSI-X if we can only get a single
3891          * vector. */
3892
3893         mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
3894                                     GFP_KERNEL);
3895         if (mgp->msix_vectors == NULL)
3896                 goto no_msix;
3897         for (i = 0; i < mgp->num_slices; i++) {
3898                 mgp->msix_vectors[i].entry = i;
3899         }
3900
3901         while (mgp->num_slices > 1) {
3902                 mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
3903                 if (mgp->num_slices == 1)
3904                         goto no_msix;
3905                 status = pci_enable_msix_range(pdev,
3906                                                mgp->msix_vectors,
3907                                                mgp->num_slices,
3908                                                mgp->num_slices);
3909                 if (status < 0)
3910                         goto no_msix;
3911
3912                 pci_disable_msix(pdev);
3913
3914                 if (status == mgp->num_slices) {
3915                         if (old_allocated)
3916                                 kfree(old_fw);
3917                         return;
3918                 } else {
3919                         mgp->num_slices = status;
3920                 }
3921         }
3922
3923 no_msix:
3924         if (mgp->msix_vectors != NULL) {
3925                 kfree(mgp->msix_vectors);
3926                 mgp->msix_vectors = NULL;
3927         }
3928
3929 abort_with_fw:
3930         mgp->num_slices = 1;
3931         set_fw_name(mgp, old_fw, old_allocated);
3932         myri10ge_load_firmware(mgp, 0);
3933 }
3934
3935 static const struct net_device_ops myri10ge_netdev_ops = {
3936         .ndo_open               = myri10ge_open,
3937         .ndo_stop               = myri10ge_close,
3938         .ndo_start_xmit         = myri10ge_xmit,
3939         .ndo_get_stats64        = myri10ge_get_stats,
3940         .ndo_validate_addr      = eth_validate_addr,
3941         .ndo_change_mtu         = myri10ge_change_mtu,
3942         .ndo_set_rx_mode        = myri10ge_set_multicast_list,
3943         .ndo_set_mac_address    = myri10ge_set_mac_address,
3944 #ifdef CONFIG_NET_RX_BUSY_POLL
3945         .ndo_busy_poll          = myri10ge_busy_poll,
3946 #endif
3947 };
3948
3949 static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3950 {
3951         struct net_device *netdev;
3952         struct myri10ge_priv *mgp;
3953         struct device *dev = &pdev->dev;
3954         int i;
3955         int status = -ENXIO;
3956         int dac_enabled;
3957         unsigned hdr_offset, ss_offset;
3958         static int board_number;
3959
3960         netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3961         if (netdev == NULL)
3962                 return -ENOMEM;
3963
3964         SET_NETDEV_DEV(netdev, &pdev->dev);
3965
3966         mgp = netdev_priv(netdev);
3967         mgp->dev = netdev;
3968         mgp->pdev = pdev;
3969         mgp->pause = myri10ge_flow_control;
3970         mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3971         mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3972         mgp->board_number = board_number;
3973         init_waitqueue_head(&mgp->down_wq);
3974
3975         if (pci_enable_device(pdev)) {
3976                 dev_err(&pdev->dev, "pci_enable_device call failed\n");
3977                 status = -ENODEV;
3978                 goto abort_with_netdev;
3979         }
3980
3981         /* Find the vendor-specific cap so we can check
3982          * the reboot register later on */
3983         mgp->vendor_specific_offset
3984             = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3985
3986         /* Set our max read request to 4KB */
3987         status = pcie_set_readrq(pdev, 4096);
3988         if (status != 0) {
3989                 dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3990                         status);
3991                 goto abort_with_enabled;
3992         }
3993
3994         myri10ge_mask_surprise_down(pdev);
3995         pci_set_master(pdev);
3996         dac_enabled = 1;
3997         status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3998         if (status != 0) {
3999                 dac_enabled = 0;
4000                 dev_err(&pdev->dev,
4001                         "64-bit pci address mask was refused, "
4002                         "trying 32-bit\n");
4003                 status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
4004         }
4005         if (status != 0) {
4006                 dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
4007                 goto abort_with_enabled;
4008         }
4009         (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
4010         mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
4011                                       &mgp->cmd_bus, GFP_KERNEL);
4012         if (mgp->cmd == NULL)
4013                 goto abort_with_enabled;
4014
4015         mgp->board_span = pci_resource_len(pdev, 0);
4016         mgp->iomem_base = pci_resource_start(pdev, 0);
4017         mgp->mtrr = -1;
4018         mgp->wc_enabled = 0;
4019 #ifdef CONFIG_MTRR
4020         mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
4021                              MTRR_TYPE_WRCOMB, 1);
4022         if (mgp->mtrr >= 0)
4023                 mgp->wc_enabled = 1;
4024 #endif
4025         mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
4026         if (mgp->sram == NULL) {
4027                 dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
4028                         mgp->board_span, mgp->iomem_base);
4029                 status = -ENXIO;
4030                 goto abort_with_mtrr;
4031         }
4032         hdr_offset =
4033             swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
4034         ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
4035         mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
4036         if (mgp->sram_size > mgp->board_span ||
4037             mgp->sram_size <= MYRI10GE_FW_OFFSET) {
4038                 dev_err(&pdev->dev,
4039                         "invalid sram_size %dB or board span %ldB\n",
4040                         mgp->sram_size, mgp->board_span);
4041                 goto abort_with_ioremap;
4042         }
4043         memcpy_fromio(mgp->eeprom_strings,
4044                       mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
4045         memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
4046         status = myri10ge_read_mac_addr(mgp);
4047         if (status)
4048                 goto abort_with_ioremap;
4049
4050         for (i = 0; i < ETH_ALEN; i++)
4051                 netdev->dev_addr[i] = mgp->mac_addr[i];
4052
4053         myri10ge_select_firmware(mgp);
4054
4055         status = myri10ge_load_firmware(mgp, 1);
4056         if (status != 0) {
4057                 dev_err(&pdev->dev, "failed to load firmware\n");
4058                 goto abort_with_ioremap;
4059         }
4060         myri10ge_probe_slices(mgp);
4061         status = myri10ge_alloc_slices(mgp);
4062         if (status != 0) {
4063                 dev_err(&pdev->dev, "failed to alloc slice state\n");
4064                 goto abort_with_firmware;
4065         }
4066         netif_set_real_num_tx_queues(netdev, mgp->num_slices);
4067         netif_set_real_num_rx_queues(netdev, mgp->num_slices);
4068         status = myri10ge_reset(mgp);
4069         if (status != 0) {
4070                 dev_err(&pdev->dev, "failed reset\n");
4071                 goto abort_with_slices;
4072         }
4073 #ifdef CONFIG_MYRI10GE_DCA
4074         myri10ge_setup_dca(mgp);
4075 #endif
4076         pci_set_drvdata(pdev, mgp);
4077         if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
4078                 myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
4079         if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
4080                 myri10ge_initial_mtu = 68;
4081
4082         netdev->netdev_ops = &myri10ge_netdev_ops;
4083         netdev->mtu = myri10ge_initial_mtu;
4084         netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
4085
4086         /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
4087         netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
4088
4089         netdev->features = netdev->hw_features;
4090
4091         if (dac_enabled)
4092                 netdev->features |= NETIF_F_HIGHDMA;
4093
4094         netdev->vlan_features |= mgp->features;
4095         if (mgp->fw_ver_tiny < 37)
4096                 netdev->vlan_features &= ~NETIF_F_TSO6;
4097         if (mgp->fw_ver_tiny < 32)
4098                 netdev->vlan_features &= ~NETIF_F_TSO;
4099
4100         /* make sure we can get an irq, and that MSI can be
4101          * setup (if available). */
4102         status = myri10ge_request_irq(mgp);
4103         if (status != 0)
4104                 goto abort_with_firmware;
4105         myri10ge_free_irq(mgp);
4106
4107         /* Save configuration space to be restored if the
4108          * nic resets due to a parity error */
4109         pci_save_state(pdev);
4110
4111         /* Setup the watchdog timer */
4112         setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
4113                     (unsigned long)mgp);
4114
4115         netdev->ethtool_ops = &myri10ge_ethtool_ops;
4116         INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
4117         status = register_netdev(netdev);
4118         if (status != 0) {
4119                 dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
4120                 goto abort_with_state;
4121         }
4122         if (mgp->msix_enabled)
4123                 dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
4124                          mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
4125                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
4126         else
4127                 dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
4128                          mgp->msi_enabled ? "MSI" : "xPIC",
4129                          pdev->irq, mgp->tx_boundary, mgp->fw_name,
4130                          (mgp->wc_enabled ? "Enabled" : "Disabled"));
4131
4132         board_number++;
4133         return 0;
4134
4135 abort_with_state:
4136         pci_restore_state(pdev);
4137
4138 abort_with_slices:
4139         myri10ge_free_slices(mgp);
4140
4141 abort_with_firmware:
4142         myri10ge_dummy_rdma(mgp, 0);
4143
4144 abort_with_ioremap:
4145         if (mgp->mac_addr_string != NULL)
4146                 dev_err(&pdev->dev,
4147                         "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
4148                         mgp->mac_addr_string, mgp->serial_number);
4149         iounmap(mgp->sram);
4150
4151 abort_with_mtrr:
4152 #ifdef CONFIG_MTRR
4153         if (mgp->mtrr >= 0)
4154                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
4155 #endif
4156         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4157                           mgp->cmd, mgp->cmd_bus);
4158
4159 abort_with_enabled:
4160         pci_disable_device(pdev);
4161
4162 abort_with_netdev:
4163         set_fw_name(mgp, NULL, false);
4164         free_netdev(netdev);
4165         return status;
4166 }
4167
4168 /*
4169  * myri10ge_remove
4170  *
4171  * Does what is necessary to shutdown one Myrinet device. Called
4172  *   once for each Myrinet card by the kernel when a module is
4173  *   unloaded.
4174  */
4175 static void myri10ge_remove(struct pci_dev *pdev)
4176 {
4177         struct myri10ge_priv *mgp;
4178         struct net_device *netdev;
4179
4180         mgp = pci_get_drvdata(pdev);
4181         if (mgp == NULL)
4182                 return;
4183
4184         cancel_work_sync(&mgp->watchdog_work);
4185         netdev = mgp->dev;
4186         unregister_netdev(netdev);
4187
4188 #ifdef CONFIG_MYRI10GE_DCA
4189         myri10ge_teardown_dca(mgp);
4190 #endif
4191         myri10ge_dummy_rdma(mgp, 0);
4192
4193         /* avoid a memory leak */
4194         pci_restore_state(pdev);
4195
4196         iounmap(mgp->sram);
4197
4198 #ifdef CONFIG_MTRR
4199         if (mgp->mtrr >= 0)
4200                 mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
4201 #endif
4202         myri10ge_free_slices(mgp);
4203         if (mgp->msix_vectors != NULL)
4204                 kfree(mgp->msix_vectors);
4205         dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4206                           mgp->cmd, mgp->cmd_bus);
4207
4208         set_fw_name(mgp, NULL, false);
4209         free_netdev(netdev);
4210         pci_disable_device(pdev);
4211 }
4212
4213 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
4214 #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
4215
4216 static const struct pci_device_id myri10ge_pci_tbl[] = {
4217         {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4218         {PCI_DEVICE
4219          (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4220         {0},
4221 };
4222
4223 MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4224
4225 static struct pci_driver myri10ge_driver = {
4226         .name = "myri10ge",
4227         .probe = myri10ge_probe,
4228         .remove = myri10ge_remove,
4229         .id_table = myri10ge_pci_tbl,
4230 #ifdef CONFIG_PM
4231         .suspend = myri10ge_suspend,
4232         .resume = myri10ge_resume,
4233 #endif
4234 };
4235
4236 #ifdef CONFIG_MYRI10GE_DCA
4237 static int
4238 myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4239 {
4240         int err = driver_for_each_device(&myri10ge_driver.driver,
4241                                          NULL, &event,
4242                                          myri10ge_notify_dca_device);
4243
4244         if (err)
4245                 return NOTIFY_BAD;
4246         return NOTIFY_DONE;
4247 }
4248
4249 static struct notifier_block myri10ge_dca_notifier = {
4250         .notifier_call = myri10ge_notify_dca,
4251         .next = NULL,
4252         .priority = 0,
4253 };
4254 #endif                          /* CONFIG_MYRI10GE_DCA */
4255
4256 static __init int myri10ge_init_module(void)
4257 {
4258         pr_info("Version %s\n", MYRI10GE_VERSION_STR);
4259
4260         if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4261                 pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4262                        myri10ge_rss_hash);
4263                 myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4264         }
4265 #ifdef CONFIG_MYRI10GE_DCA
4266         dca_register_notify(&myri10ge_dca_notifier);
4267 #endif
4268         if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4269                 myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4270
4271         return pci_register_driver(&myri10ge_driver);
4272 }
4273
4274 module_init(myri10ge_init_module);
4275
4276 static __exit void myri10ge_cleanup_module(void)
4277 {
4278 #ifdef CONFIG_MYRI10GE_DCA
4279         dca_unregister_notify(&myri10ge_dca_notifier);
4280 #endif
4281         pci_unregister_driver(&myri10ge_driver);
4282 }
4283
4284 module_exit(myri10ge_cleanup_module);